src/security/apparmor/meson.build builds this path dynamically
based on the value of sysconfdir, so we should do the same here
or the code and the filesystem might end up disagreeing.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
This variable is used in src/security/meson.build to decide
whether to install the AppArmor profiles, and at the moment
even when the user specifies -Dapparmor_profiles=true they
don't get installed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
In a very distant past, we came around machines that has not
continuous node IDs. This made us error out when constructing
capabilities XML. We resolved it by utilizing strange behaviour
of numa_node_to_cpus() in which it returned a mask with all bits
set for a non-existent node. However, this is not the only case
when it returns all ones mask - if the node exists and has enough
CPUs to fill the mask up (e.g. 128 CPUs).
The fix consists of using nodemask_isset(&numa_all_nodes, ..)
prior to calling numa_node_to_cpus() to determine if the node
exists.
Fixes: 628c935747
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1860231
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There was a report on libvirt-users [1] about the domxml to/from
native converter in the Xen driver not handling PCI addresses
without a domain specification. This patch improves parsing of PCI
addresses in the converter and allows PCI addresses with only
bb:ss.f. xl.cfg(5) also allows either the dddd:bb:ss.f or bb:ss.f
format. A test has been added to check the conversion from xl.cfg
to domXML.
[1] https://www.redhat.com/archives/libvirt-users/2020-August/msg00040.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Update the events stap example because the event loop impl is replaced by
GLib based event loop impl after commit 55fe8110.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
In libvirt 6.6 stopping guests with libvirt-guests.sh is broken.
As soon as there is more than one guest one can see
`systemctl stop libvirt-guests` failing and in the log we see:
libvirt-guests.sh[2455]: Running guests on default URI:
libvirt-guests.sh[2457]: /usr/lib/libvirt/libvirt-guests.sh: 120:
local: 2a49cb0f-1ff8-44b5-a61d-806b9e52dae2: bad variable name
libvirt-guests.sh[2462]: no running guests.
That is due do mutliple guests becoming a list of UUIDs. Without
recognizing this as one single string the assignment breaks when using 'local'
(which was recently added in 6.3.0). This is because local is defined as
local [option] [name[=value] ... | - ]
which makes the shell trying handle the further part of the string as
variable names. In the error above that string isn't a valid variable
name triggering the issue that is seen.
This depends on the shell being used. POSIX shells don't have 'local'
specified yet and for the common shells it depends. It worked in bash and
bash-in-POSIX-mode, but for example dash in POSIX mode triggers the issue.
To resolve that 'textify' all assignments that are strings or potentially
can become such lists (even if they are not using the local qualifier).
Fixes: 08071ec0 "tools: variables clean-up in libvirt-guests script"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
After previous cleanups, some labels in some functions have
nothing but 'return' statement in them. Drop the labels and
replace 'goto'-s with respective return statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Again, instead of closing FDs explicitly, we can automatically
close them when they go out of their respective scopes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A cleanup function can be declared for virFDStreamMsg type so
that the structure doesn't have to be freed explicitly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All callers of virFDStreamMsgQueuePush() have the same pattern:
they explicitly set @msg passed to NULL to avoid freeing it later
on. Well, the function can take address of the pointer and clear
it for them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The buffer that allocated in the virFDStreamThreadDoRead() can be
automatically freed, or if saved into the message structure it
can be stolen.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, only ENOENT is ignored (to deal with kernels without
devmapper). However, as reported on the list, under certain
scenarios a different error can occur. For instance, when libvirt
is running inside a container which doesn't have permissions to
talk to the devmapper. If this is the case, then open() returns
-1 and sets errno=EPERM.
Assuming that multipath devices are fairly narrow use case and
using them in a restricted container is even more narrow the best
fix seems to be to ignore all open errors BUT produce a warning
on failure. To avoid flooding logs with warnings on kernels
without devmapper the level is reduced to a plain debug message.
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When adding support for HMAT, in f0611fe883 I've introduced a
check which aims to validate /domain/cpu/numa/interconnects. As a
part of that, there is a loop which checks whether all <latency/>
with @cache attribute refer to an existing cache level. For
instance:
<cpu mode='host-model' check='partial'>
<numa>
<cell id='0' cpus='0-5' memory='512000' unit='KiB' discard='yes'>
<cache level='1' associativity='direct' policy='writeback'>
<size value='8' unit='KiB'/>
<line value='5' unit='B'/>
</cache>
</cell>
<interconnects>
<latency initiator='0' target='0' cache='1' type='access' value='5'/>
<bandwidth initiator='0' target='0' type='access' value='204800' unit='KiB'/>
</interconnects>
</numa>
</cpu>
This XML defines that accessing L1 cache of node #0 from node #0
has latency of 5ns.
However, the loop was not written properly. Well, the check in
it, as it was always checking for the first cache in the target
node and not the rest. Therefore, the following example errors
out:
<cpu mode='host-model' check='partial'>
<numa>
<cell id='0' cpus='0-5' memory='512000' unit='KiB' discard='yes'>
<cache level='3' associativity='direct' policy='writeback'>
<size value='10' unit='KiB'/>
<line value='8' unit='B'/>
</cache>
<cache level='1' associativity='direct' policy='writeback'>
<size value='8' unit='KiB'/>
<line value='5' unit='B'/>
</cache>
</cell>
<interconnects>
<latency initiator='0' target='0' cache='1' type='access' value='5'/>
<bandwidth initiator='0' target='0' type='access' value='204800' unit='KiB'/>
</interconnects>
</numa>
</cpu>
This errors out even though it is a valid configuration. The L1
cache under node #0 is still present.
Fixes: f0611fe883
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Both parsing and formatting of NBD migration jobs is QEMU specific and
since we're trying to create a hypervisor-agnostic module out of
qemu_domainjob.c, move the NBD XML handling bits to the qemu_domain
module instead. Additionally, move the respective NBD XML calls to
the 'parseJob'/'formatJob' callbacks of the
qemuDomainObjPrivateJobCallbacks structure.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Functions `qemuDomainRemoveInactiveJob` and
`qemuDomainRemoveInactiveJobLocked` had their declaration misplaced in
`qemu_domainjob` and were moved to `qemu_domain` where their definitions
reside.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Most of our augeas files are generated during meson setup into build
directory and we were running augeas tests only for these files.
However, we have some other augeas and config files that are not
modified during meson setup and they are only in source directories.
In order to run tests for these files we need to provide different path
to both source and build directories.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This will be used later to specify different include directories for
augparse binary to run augeas tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 862cf2ace4 modified the generator
to base edit links in the root of the repository but forgot to add the
'docs/' prefix to the code generating kbase articles, manpages and the
internals documentation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In case qemuDumpToFd() returns zero followed by a VIR_CLOSE(fd) fail,
we'd jump to the "cleanup" label with "ret=0", potentially resulting in
an unexpected success return value.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In one of my latest patch (v6.6.0~30) I was trying to remove
libdevmapper use in favor of our own implementation. However, the
code did not take into account that device mapper can be not
compiled into the kernel (e.g. be a separate module that's not
loaded) in which case /proc/devices won't have the device-mapper
major number and thus virDevMapperGetTargets() and/or
virIsDevMapperDevice() fails.
However, such failure is safe to ignore, because if device mapper
is missing then there can't be any multipath devices and thus we
don't need to allow the deps in CGroups, nor create them in the
domain private namespace, etc.
Fixes: 2249455654
Reported-by: Andrea Bolognani <abologna@redhat.com>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The device mapper major is needed in virIsDevMapperDevice() which
determines whether given device is managed by device-mapper. This
number is obtained by parsing /proc/devices and then stored in a
global variable so that the file doesn't have to be parsed again.
However, as it turns out this logic is flawed - the major number
is not static and can change as it can be specified as a
parameter when loading the dm-mod module.
Unfortunately, I was not able to come up with a good solution and
thus the /proc/devices file is being parsed every time we need
the device mapper major.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Slightly improve the list of known authentication service types:
- reword 'ssh' to mention it is used for the ssh driver (for remote
QEMU), and stop mentioning the removed Phyp driver
- add 'hyperv', used by the HyperV driver
- alphabetically sort the list
- use a bulletted list instead of a numbered one
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Change the 'make check' reference after the switch to meson/ninja.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Update the remaining 'make check' references after the
switch to meson/ninja.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Update the remaining 'make check' references after the
switch to meson/ninja.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Update the remaining 'make check' references after the
switch to meson/ninja.
The reference in testsuites.html.in was kept with a note that it is
the process for Libvirt 6.6.0 and older.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
GCC 10 complains about variables may be used uninitialized.
Even though it might be false positives, we can easily avoid them.
Avoiding
../src/storage/storage_backend_iscsi_direct.c:634:11: error: ‘nb_block’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
634 | while (lba < nb_block) {
| ^
../src/storage/storage_backend_iscsi_direct.c:619:14: note: ‘nb_block’ was declared here
619 | uint64_t nb_block;
| ^~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:637:16: error: ‘block_size’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
637 | task = iscsi_write16_sync(iscsi, lun, lba, data,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
638 | block_size * to_write,
| ~~~~~~~~~~~~~~~~~~~~~~
639 | block_size, 0, 0, 0, 0, 0);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:618:14: note: ‘block_size’ was declared here
618 | uint32_t block_size;
| ^~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c: In function ‘virStorageBackendISCSIDirectRefreshPool’:
../src/storage/storage_backend_iscsi_direct.c:320:39: error: ‘nb_block’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
320 | vol->target.capacity = block_size * nb_block;
| ~~~~~~~~~~~^~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:306:14: note: ‘nb_block’ was declared here
306 | uint64_t nb_block;
| ^~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:320:39: error: ‘block_size’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
320 | vol->target.capacity = block_size * nb_block;
| ~~~~~~~~~~~^~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:305:14: note: ‘block_size’ was declared here
305 | uint32_t block_size;
| ^~~~~~~~~~
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
GCC 10 complains about "arg" possibly being a NULL dereference.
Even though it might be a false positive, we can easily avoid it.
Avoiding
../tools/vsh.c: In function ‘vshCommandOptStringReq’:
../tools/vsh.c:1034:19: error: potential null pointer dereference [-Werror=null-dereference]
1034 | else if (!*arg->data && !(arg->def->flags & VSH_OFLAG_EMPTY_OK))
| ~~~^~~~~~
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
GCC 10 complains about "well_formed_uri" may be used uninitialzed.
Even though it is a false positive, we can easily avoid it.
Avoiding
../src/qemu/qemu_migration.c: In function ‘qemuMigrationDstPrepareDirect’:
../src/qemu/qemu_migration.c:2920:16: error: ‘well_formed_uri’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2920 | if (well_formed_uri) {
| ^
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
sc_spacing-check FAIL reporting a case of "Curly brackets around
single-line body:" in a recent commit.
Fixes: d9c21f4b "apparmor: allow adding permanent per guest rules"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
With qemu 5.0 and libvirt 6.6 there are new apparmor denials:
apparmor="DENIED" operation="umount" profile="libvirtd"
name="/run/libvirt/qemu/1-kvmguest-groovy-norm.dev/" comm="rpc-worker"
These are related to new issues around devmapper handling [1] and the
error path triggered by these issues now causes this new denial.
There are already related rules for mounting and it seems right to
allow also the related umount.
[1]: https://www.redhat.com/archives/libvir-list/2020-August/msg00236.html
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The design of apparmor in libvirt always had a way to define custom
per-guest rules as described in docs/drvqemu.html and [1].
A fix meant to clean the profiles after guest shutdown was a bit
overzealous and accidentially removed this important admin feature as
well.
Therefore reduce the --delete option of virt-aa-helper to only delete
the .files that would be re-generated in any case.
Users/Admins are always free to clean the profiles themselve if they
prefer a clean directory - they will be regenerated as needed. But
libvirt should never remove the base profile meant to allow per-guest
overrides and thereby break a documented feature.
[1]: https://gitlab.com/apparmor/apparmor/-/wikis/Libvirt#advanced-usage
Fixes: eba2225b "apparmor: delete profile on VM shutdown"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we don't have cgroups available and user tries to update blkio
parameters for running VM it will crash.
It should have been protected by the virCgroupHasController() check but
it was never called if the API was executed without any flags.
We call virDomainObjGetDefs() which sets `def` and `persistentDef` based
on the flags and these two variables should be used to figure out if we
need to update LIVE, CONFIG or both states.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1808293
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With virtio-net we also need to disable the iPXE option ROM otherwise
a SEV-enabled guest would not boot. While at it, fix the full machine
XML examples accordingly.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
src/bhyve/bhyve_parse_command.c:437:9: warning: Either the condition
'!config' is redundant or there is possible null pointer dereference:
config. [nullPointerRedundantCheck]
src/bhyve/bhyve_parse_command.c:280:23: warning: Either the condition
'!separator' is redundant or there is pointer arithmetic
with NULL pointer. [nullPointerArithmeticRedundantCheck]
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
BPF syscall BPF_MAP_GET_NEXT_KEY returns -1 if something fails but it
will also return -1 if trying to get next key using the last key in the
map with errno set to ENOENT.
If there are VMs running and libvirtd is restarted and user tries to
call some cgroup devices operation on a VM we need to get the count of
entries in BPF map and it fails which will result in error when trying
to attach/detech devices.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1833321
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When checking for ifconfig(8), set not only IFCONFIG value,
but also IFCONFIG_PATH as it's used in util/virnetdevip.c.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add missing prerequisite headers for checking BRDGSFD, BRDGADD,
BRDGDEL in net/if_bridgevar.h.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
