This patch removes libxlDomainObjBeginJob() and replaces it with
generalized virDomainObjBeginJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjBeginJob() into
src/conf/virdomainjob as universal virDomainObjBeginJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch uses the job object directly in the domain object and
removes the job object from private data of all drivers that use
it as well as other relevant code (initializing and freeing the
structure).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds the generalized job object into the domain object
so that it can be used by all drivers without the need to extract
it from the private data.
Because of this, the job object needs to be created and set
during the creation of the domain object. This patch also extends
xmlopt with possible job config containing virDomainJobObj
callbacks, its private data callbacks and one variable
(maxQueuedJobs).
This patch includes:
* addition of virDomainJobObj into virDomainObj (used in the
following patches)
* extending xmlopt with job config structure
* new function for freeing the virDomainJobObj
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There may be a case that the callback structure will exist with
no callbacks (following patches). This patch adds check for
specific callbacks before using them.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The following patches move job object as a member into the domain
object. Because of this, domain_conf (where the domain object is
defined) needs to import the file with the job object.
It makes sense to move jobs to the same level as the domain_conf:
into src/conf/
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Struct virDomainJobData is meant for statistics for async jobs.
It was used to keep track of only two attributes, one of which is
also in the generalized virDomainJobObj ("started") and one which
is always set to the same value, if any job is active
("jobType").
This patch removes usage & allocation of virDomainJobData
structure and rewrites libxlDomainJobUpdateTime() into more
suitable libxlDomainJobGetTimeElapsed().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjBeginJobInternal() as
virDomainObjBeginJobInternal() into hypervisor in order to be
used by other hypervisors in the following patches.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that we assume all the virtio capabilities, this function does not
check anything.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Added by QEMU commit:
commit 74b3e46630446568aecb0be1c77c4875d7a52f6d
Author: Jason Wang <jasowang@redhat.com>
CommitDate: 2019-10-25 07:46:22 -0400
virtio: add property to enable packed virtqueue
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191025083527.30803-9-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
git describe: v4.1.0-1780-g74b3e46630 contains: v4.2.0-rc0~32^2~17
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All the supported QEMU versions should have iothread support
on the virtio-scsi controllers if they are compiled in.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced by QEMU commit 0846e6359c407e372f446723b8b7b09ac20d0f03
released in QEMU 1.3.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Function daemonConfigFilePath() will assign a path to
remote_config_file definitely and the path will be validated
in following codes. So, it's unnecessary to return value
from daemonConfigFilePath() and check the returned value.
Signed-off-by: jiangjiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The password may not be valid in the error branch, but for
higher security, it's better to clean up the memory before
freeing it.
Signed-off-by: jiangjiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
We have always considered "migrate_cancel" QMP command to return after
successfully cancelling the migration. But this is no longer true (to be
honest I'm not sure it ever was) as it just changes the migration state
to "cancelling". In most cases the migration is canceled pretty quickly
and we don't really notice anything, but sometimes it takes so long we
even get to clearing migration capabilities before the migration is
actually canceled, which fails as capabilities can only be changed when
no migration is running. So to avoid this issue, we can wait for the
migration to be really canceled after sending migrate_cancel. The only
place where we don't need synchronous behavior is when we're cancelling
migration on user's request while it is actively watched by another
thread.
https://bugzilla.redhat.com/show_bug.cgi?id=2114866
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We will need a little bit more code around qemuMonitorMigrateCancel to
make sure it works as expected. The new qemuMigrationSrcCancel helper
will avoid repeating the code in several places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Let's call this qemuMigrationSrcCancelUnattended as the function is
supposed to be used when no other thread is watching the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Just before pushing my earlier commit I've switch order of two
arguments of virProcessGetStatInfo() (as suggested in review).
However, I forgot to swap the arguments in
qemuDomainGetStatsCpuProc() which leads to userTime and sysTime
being swapped.
Fixes: 044b8744d6
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use approach similar to virFileIsSharedFsFUSE to declaratively handle
the filesystem magic numbers mapping to libvirt's fstypes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The filesystem type magic constant was added for the 'quobyte' shared
filesystem in commit 451094bd15 but is present neither in the kernel
sources nor in coreutils which we've historically used as source of
information.
Since the code dealing with FUSE-based filesystems doesn't need the
constant we can remove it and the now-dead check for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the code works properly as no code path is specifically wanting to
check for glusterfs, we should properly declare glusterfs as a separate
from GFS2.
Fixes: 478da65fb4
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virFileIsSharedFixFUSE' was used to update the 'f_type' field for
certain shared filesystem types.
This patch renames it to 'virFileIsSharedFsFUSE' and makes it directly
return whether the FUSE filesystem is shared or not and simplifies
additions to the list of shared FUSE filesystems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free memory of 'canonPath' so that the failure of
'setmntent' doesn't have to go to 'cleanup'. This allows us to remove
the cleanup section and the 'ret' variable as the rest of the function
can't fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Expand some of the uncommon or unobvious filesystem names in a comment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We populate the bits individually so unsigned is the proper type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit d7ae7ce363 forgot to clean up unused error output files
'boot-dev+order.err' and 'boot-menu-enable-with-timeout-invalid'
after converting tests to DO_TEST_CAPS_LATEST.
Fixes: d7ae7ce363
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For domains started under session URI, we don't set up CGroups
(well, how could we since we're not running as root anyways).
Nevertheless, fetching CPU statistics exits early because of
lacking cpuacct controller. But with recent extension to
virProcessGetStatInfo() we can get the values we need from the
proc filesystem. Implement the fallback for the session URI as
some of virt tools rely on cpu.* stats to be reported (virt-top,
virt-manager).
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/353
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1693707
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virProcessGetStatInfo() helper parses /proc stat file for
given PID and/or TID and reports cumulative cpuTime which is just
a sum of user and sys times. But in near future, we'll need those
times separately, so make the function return them too (if caller
desires).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After support for the sheepdog storage driver backend was removed we
don't need to install it any longer in the containers.
Regenerate the dockerfiles after:
https://gitlab.com/libvirt/libvirt-ci/-/merge_requests/314
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
qemu-7.1 is released now. Update the capabilities for the final time.
Notable change since last update:
- 'exit-failure' action for 'panic' lifecycle action added
The 'min-xlevel' change is related to upgrade of the host kernel.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Split up the condition and report a different error message when the
host or host config results in S390 PV launch security being
unavailable.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2122534
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
The replacement is 'serial' and 'parallel' respectively introduced at
least in qemu-2.9 and the old versions are deprecated since qemu-6.0
(qemu commit 5965243641d797b22 ).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the properties use '-1' as default and the code omits formatting
them when the property is '-1'. Additionally subsequent validation code
rejects all other negative values anyways.
Since we've never formatted '-1' into an XML formatted by libvirt we can
make the parser more strict, as we will never fail to parse existing
on-disk libvirt-owned XMLs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2121627
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move some checks earlier so that they are not tucked at the back of the
block of code doing the actual parsing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'index' is parsed to fit into a signed int but not have negative values.
virXMLPropInt can do that internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor all cases which use virXMLPropInt and then subsequently check
that the parsed value is not '-1'/negative by using the VIR_XML_PROP_NONNEGATIVE
flag for virXMLPropInt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code attempted to report an error if the user added the 'index'
attribute to the 'target' element, but neglected to actually return an
error code.
Fix it by using the VIR_XML_PROP_NONNEGATIVE flag for virXMLPropInt
which refuses user passed negative numbers.
Fixes: 020dd80ecb
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Code was not indented properly for one of the nested conditions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>