This alone makes not much sense. But the aim is to reuse this
function in qemuBuildVhostuserCommandLine() where 'nowait' is not
supported for vhost-user devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We tend to prevent using 'default' in switches. And it is for a
good reason - control may end up in paths we wouldn't want for
new values. In this specific case, if qemuBuildHostNetStr is
called over VIR_DOMAIN_NET_TYPE_VHOSTUSER it would produce
meaningless output. Fortunately, there no such call yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of blindly claim support for hot-plugging of every
interface type out there we should copy approach we have for
device types: white listing supported types and explicitly error
out on unsupported ones.
For instance, trying to hotplug vhostuser interface results in
nothing usable from guest currently. vhostuser typed interfaces
require additional work on our side.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking at its
beginning and then have one big switch for all the interface
types it supports.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Not every system out there has syslog, that's why we check for it
in our configure script. However, in 640b58abdf while fixing
another issue, some variables and functions are called that are
defined only when syslog.h is present. But these function
calls/variables were not guarded by #ifdef-s.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemuBuildSmbiosBiosStr and qemuBuildSmbiosSystemStr return NULL if
there's nothing to format on the commandline. Reporting errors from
buffer creation doesn't make sense since it would be ignored.
This initially started as a fix of some debug printing in
virCgroupDetect. However it turned out that other places suffer
from the similar problem. While dealing with pids, esp. in cases
where we cannot use pid_t for ABI stability reasons, we often
chose an unsigned integer type. This makes no sense as pid_t is
signed.
Also, new syntax-check rule is introduced so we won't repeat this
mistake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are two video devices with models without VGA compatibility mode.
They are primary used as secondary video devices, but in some cases it
is required to use them also as primary video devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This improves commit 706b5b6277 in a way that we check qemu capabilities
instead of what architecture we are running on to detect whether we can
use *virtio-vga* model or not. This is not a case only for arm/aarch64.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit 21373feb added support for primary virtio-vga device but it was
checking for virtio-gpu. Let's check for existence of virtio-vga if we
want to use it.
Virtio video device is currently represented by three different models
*virtio-gpu-device*, *virtio-gpu-pci* and *virtio-vga*. The first two
models are tied together and if virtio video devices is compiled in they
both exist. However, the *virtio-vga* model doesn't have to exist on
some architectures even if the first two models exist. So we cannot
group all three together.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Before this patch we've checked qemu capabilities for video devices
only while constructing qemu command line using "-device" option.
Since we support qemu only if "-device" option is present we can use
the same capabilities to check also video devices while using "-vga"
option to construct qemu command line.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All definition validation that doesn't depend on qemu capabilities
and was allowed previously as valid definition should be placed into
qemuDomainDefValidate.
The check whether video type is supported or not was based on an enum
that translates type into model. Use switch to ensure that if new
video type is added, it will be properly handled.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We generally uses QEMU_CAPS_DEVICE_$NAME to probe for existence of some
device and QEMU_CAPS_$NAME_$PROP to probe for existence of some property
of that device.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If QEMU in question supports QMP, this capability is set if
QEMU_CAPS_DEVICE_QXL was set based on existence of "-device qxl". If
libvirt needs to parse *help*, because there is no QMP support, it
checks for existence of "-vga qxl", but it also parses output of
"-device ?" and sets QEMU_CAPS_DEVICE_QXL too.
Now that libvirt supports only QEMU that has "-device" implemented it's
safe to drop this capability and stop using it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch simplifies QEMU capabilities for QXL video device. QEMU
exposes this device as *qxl-vga* and *qxl* and they are both the same
device with the same set of parameters, the only difference is that
*qxl-vga* includes VGA compatibility.
Based on QEMU code they are tied together so it's safe to check only for
presence of only one of them.
This patch also removes an invalid test case "video-qxl-sec-nodevice"
where there is only *qxl-vga* device and *qxl* device is not present.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Qemu supports *xen* video device only with XEN and this code was part
of xenner code. We dropped support for xenner in commit de9be0a.
Before this patch if you used 'xen' video type you ended up with
domain without any video device at all. Now we don't allow to start
such domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It was never safe anyway and as such shouldn't have been enabled in the
first place. Future patches will allow hot-(un)pluging of some ivshmem
devices as a workaround.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Due to the switch of parameters in a call to virDomainShmemDefEquals()
no device was found when looking for device with all the information
except address. Also fix the indentation.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the last event callback is unregistered while the event loop is
dispatching, it is only marked as deleted, but not removed. The number
of callbacks is more than zero in that case, so the timer is not
removed. Because it can be removed in this function now (but also
accessed afterwards so that we set 'isDispatching = false' and have it
locked), we need to temporarily increase the reference counter of the
state for the duration of this function.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is a repeating pattern of code that removes the timer if it's not
needed. So let's move it to a new function. We'll also use it later.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There should be one more reference because it is being kept in the list
of callbacks as an opaque. We also unref it properly using
virObjectFreeCallback.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently Libvirt allows attempts to migrate read only disks. Qemu
cannot handle this as read only disks cannot be written to on the
destination system. The end result is a cryptic error message and a
failed migration.
This patch causes migration to fail earlier and provides a meaningful
error message stating that migrating read only disks is not supported.
Signed-off-by: Corey S. McQuay <csmcquay@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Make sure that the topology results into a sane number of cpus (up to
UINT_MAX) so that it can be sanely compared to the vcpu count of the VM.
Additionally the helper added in this patch allows to fetch the total
number the topology results to so that it does not have to be
reimplemented later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378290
In both virLogParseOutput and virLogParseFilter, rather than returning
NULL, goto cleanup since it's possible that for each the first condition
passes, but the || condition doesn't and thus we leak memory.
The dnsmasq man page recommends that dhcp-authoritative "should be
set when dnsmasq is definitely the only DHCP server on a network".
This is the case for libvirt-managed virtual networks.
The effect of this is that VMs that fail to renew their DHCP lease
in time (e.g. if the VM or host is suspended) will be able to
re-acquire the lease even if it's expired, unless the IP address has
been taken by some other host. This avoids various annoyances caused
by changing VM IP addresses.
Sometimes virObjectEventStateFlush can be called without timer (if the
last event was unregistered right when the timer fired). There is a
check for timer == -1, but that triggers warning and other log messages,
which is unnecessary.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Handling of outputs and filters has been changed in a way that splits
parsing and defining. Do the same thing for logging priority as well, this
however, doesn't need much of a preparation.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This is mainly virLogAddOutputTo* which were replaced by virLogNewOutputTo* and
the previously poorly named ones virLogParseAndDefine* functions. All of these
are unnecessary now, since all the original callers were transparently switched
to the new model of separate parsing and defining logic.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
