Rewrite the capability fetching to use the new helper, thus simplifying
the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'testQemuInsertRealCaps' looks up and inserts real capabilities into the
capability 'file cache' for testing purposes. Effectively this helper
replaces following steps:
1) testQemuGetRealCaps
2) virFileCacheClear
3) qemuTestCapsCacheInsert
This helper doesn't copy the capabilities that are borrowed from it's
internal cache thus they must not be modified afterwards in contrast to
the above steps.
The use of this helper is in simple tests which require some form of
capabilities to parse a definition but don't care about doctoring them
in any way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce testQemuGetRealCapsInternal that loads and caches the
capabilities. testQemuGetRealCaps just copies the cache entry and
returns it to the user.
The new helper will be used in a helper that doesn't modify the
capabilities and thus we don't need to copy it before use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Expand the default machine type alias of the 'latest' capabilities for
an architecture before caching it rather than after copying it, so that
we don't duplicate the work all the time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The domain capabilities data feature a firmware section which is filled
by few entries. The entries used until now looked real and it was
suspicious that a x86_64 host was listing aarch64 firmware images which
should not happen.
Fill it by an obviously fake path as it's not actually interpreted in a
meaningful way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since nobody is expected to run valgrind over scripts now, we can
drop plenty of suppressions. Also, there are some old ones that
no longer exist and new ones, that are not covered.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A test case can be part of a test suite (just like we already
have 'syntax-check'). This then allows developers to run only a
subset of tests. For instance - when using valgrind test setup
(`meson test -C _build/ --setup valgrind`) it makes zero sense to
run syntax-check tests or other script based tests (e.g.
check-augeas-*, check-remote_protocol, etc.). What does makes
sense is to run compiled binaries.
Strictly speaking, reaching that goal is as trivial as annotating
only those compiled tests (declared in tests/meson.build) and
running them selectively:
meson test -C _build/ --setup valgrind --suite $TAG
But it may be also desirable to run test scripts separately.
Therefore, introduce two new tags: 'bin' for compiled tests, and
'script' for script based tests and annotate each test()
accordingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virtio-gpu 'blob' support was insufficiently validated. Qemu
requires a memfd memory backing in order to use udmabuf and enable blob
support. Example error:
$ virsh start rhel9
error: Failed to start domain 'rhel9'
error: internal error: qemu unexpectedly closed the monitor: 2023-07-18T02:33:57.083178Z qemu-kvm: -device {"driver":"virtio-vga","id":"video0","max_outputs":1,"blob":true,"bus":"pcie.0","addr":"0x1"}: cannot enable blob resources without udmabuf
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, the way to set PC speaker for a guest was to pass:
-soundhw pcspk
but as of QEMU commit v5.1.0-rc0~28^2~3 this is deprecated and we
should use:
-machine pcspk-audiodev=$id
instead. The old way was then removed in commit v7.1.0-rc0~99^2~3.
Now, ideally we would have a capability selecting whether we talk
to a QEMU that understands the new way or not. But it's not that
simple - the machine attribute is just an alias to the .audiodev=
attribute of 'isa-pcspk' object and both are created in
pc_machine_initfn() function, i.e. not then the PC_MACHINE() class
is initialized, but when it's instantiated. IOW, it's not possible
for us to query whether we're dealing with older or newer QEMU.
But given that the newer version is supported since v5.1.0 and the
minimal version we require is v4.2.0 (i.e. there are two releases
which don't understand the newer cmd line) and how frequently this
feature is (un-)used (the issue was reported after ~1 year since it
stopped working), I believe we can live without any capability and
just use the newer cmd line unconditionally.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/490
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Now that the QEMU_CAPS_USB_STORAGE_REMOVABLE capability is no
longer used we can stop querying it and retire it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After previous commit, there's no functional difference between
real virRandomGenerateWWN() and the mocked version. Drop the mock
then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit be1b7d5b18 introduced parsing /proc/cpuinfo for "address size"
which is not including on S390 and therefore reports an internal error.
Lets remove the parsing on S390.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add async-teardown to the features list in domain capabilities allowing
high level management to introspect the availability of the asynchronous
teardown feature.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Up until v2.11.0-rc2~19^2~3 QEMU used to require at least one
NUMA node to be configured when memory hotplug was enabled. After
that commit, QEMU automatically adds a NUMA node if none was
specified on the cmd line. Reflect this in domain XML, i.e.
explicitly add a NUMA node into our domain definition if needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2216236
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Asynchronous teardown can be specified if the QEMU binary supports it by
adding in the domain XML
<features>
...
<async-teardown enabled='yes|no'/>
...
</features>
By default this new feature is disabled.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU capability is looking in query-command-line-options response for
...
{
"parameters": [
{
"name": "async-teardown",
"type": "boolean"
}
],
"option": "run-with"
}
...
allow to use the QEMU option -run-with async-teardown=on|off
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let us introduce the xml and reply files for QEMU 8.1.0 on s390x.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In newer QEMU libvirt combinations acpi support is no longer tolerated
and ignored. Therfore before upgrading the test capabilities to QEMU
8.1.0 replies removing the acpi feature from the domain XMLs.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow //disk/target@removable for scsi disk devices, since QEMU has support
the removable attribute for scsi-hd device from v0.14.0[1].
[1]: 419e691f8e: scsi-disk: Allow overriding SCSI INQUIRY removable bit
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fix the syntax-check failures (which can be seen after
python3-flake8-import-order package is installed) with the help
of isort[1]:
289/316 libvirt:syntax-check / flake8 FAIL 5.24s exit status 2
[1]: https://pycqa.github.io/isort/
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update to v8.0.0-1739-g5f9dd6a8ce and build on a newer kernel and with
newer libblkio.
Notable changes:
- 'fdset' feature is supported for the vdpa block backend provided by
libblkio
- 'xsaves' feature is optional for EPYC-Rome
- 'cryptodev-backend-lkcf' and 'PIIX3-xen' devices removed
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Qemu 8.1.0 will add discard_no_unref option for qcow2 images.
When this option is enabled (default=false), then it will no longer
unreference clusters when guest does a discard, but it will just free
the blocks (useful for incremental backups for example) and pass the
discard to the lower layer.
This was implemented to avoid fragmentation within the qcow2 image.
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qcow2 driver allows passing discards to the storage while keeping
the reference of the block, and just marking it as zeroed. This can
decrease the levels of fragmentation of the qcow2 metadata when
discards are enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a config where both DIMM and non-DIMM <memory> devices are used so
that it validates that only DIMMs require memory slots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Memory slots are required only for DIMM-like devices, but the maximum
memory address space is relevant also for other non-DIMM memory devices
such as virtio-mem. Allow configurations where no slots are added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Memory slots are required only for DIMM-like devices, while other
devices defined via <memory> such as virtio-mem may use the PCI bus and
thus do not require/consume a memory slot.
Fix the validation code to calculate the required count of memory
devices only for DIMMs and NVDIMMs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specify the memory size by using '-m size=2048k' instead of just '-m 2'.
The new syntax is used when memory hotplug is enabled. To preserve
memory sizing, if memory hotplug is disabled the size is rounded down to
the nearest mebibyte.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already report the hosts physical address size in host capabilities,
but computing a baseline CPU definition is done from domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With the last user gone this function can be abolished. It is
preferable to use _ll instead since that is not a subject to 32/64 bit
scaling.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add data as of v8.0.0-1619-g369081c455:
Notable changes:
- 'SapphireRapids' cpu model added
- 'EPYC-Genoa(-v1)' cpu model added
- 'EPYC-Milan-v2' cpu model added
- 'EPYC-Rome-(v3|v4)' cpu models added
- new cpu features:
'fb-clear', 'cmpccxadd', 'vnmi', 'flush-l1d', 'avx-vnni-int8', 'avx-ifma',
'no-nested-data-bp', 'null-sel-clr-base', 'amd-psfd', 'auto-ibrs', 'amx-fp16',
'prefetchiti', 'lfence-always-serializing', 'avx-ne-convert'
- 8.1 machine types added
- QMP schema:
- 'block-latency-histogram-set' gained 'boundaries-zap' property
- 'qcow2' block driver gained 'discard-no-unref' flag
- 'input-send-event' now supports the 'mtt' type and corresponding properties
- 'memory-backend-file' object now has a 'offset' property
- 'query-blockstats' reports 'failed_zone_append_operations', 'avg_zone_append_latency_ns'
'avg_zone_append_queue_depth', 'zone_append_bytes', 'zone_append_latency_histogram',
'zone_append_operations', 'zone_append_merged', 'zone_append_total_time_ns'
- 'single-step' property of 'query-status' is deprecated
- 'vcpu' argument of 'trace-events-(set|get'-state' is deprecated
'cpu-host-model' qemuxml2argv test output changed as EPYC-Rome gained
few new cpu flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'trace-event-get-state' was used for testing schema validation as it had
simple arguments. Now 'vcpu' is optional and deprecated. Fix the test so
that it won't break with upcoming qemu-8.1.
Drop the 'all-attrs' case, as it's not not really testing anything
special and for the 'missing mandatory attr' case use an empty object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Format the rule attributes in two passes, first for positive 'match' and
second pass for negative. This removes the crazy logic for switching
between match modes inside the formatter.
The refactor makes it also more clear in which cases we actually do
format something.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The parser and formatter for nwfilter rules is very strange and has
weird quirks. Add a test case trying to capture some of the quirks to
visualize how it will change when the code is refactored.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP schema validator wasn't adapted to consider features of 'object'
members and thus we didn't catch the deprecation of 'device' in
'block_set_io_throttle'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every caller will pass 'qdevid' as it's populated in the data
mandatorily with qemu-4.2 and onwards due to mandatory -blockdev use.
Thus we can drop compatibility with the old way of matching the disk via
alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every caller will pass 'qdevid' as it's populated in the data
mandatorily with qemu-4.2 and onwards due to mandatory -blockdev use.
Thus we can drop compatibility with the old way of matching the disk via
alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' argument is deprecated. All real usage in the qemu driver
already uses 'id' as we populate the 'qomName' for everything except for
SD cards where throttling didn't work with libvirt for a very long time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case is validating the QMP schema against itself. This was
useful when I was developing the validator but at this point it's no
longer needed.
Additionally the QMP schema has few deprecated members now, which our
validator doesn't catch yet, so this test would start failing once I fix
the validator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using qemuMonitorTestAddItemVerbatim is more universal and that helper
also does QMP schema validation. Remove the now unused helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace qemuMonitorTestAddItemParams by qemuMonitorTestAddItemVerbatim
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace qemuMonitorTestAddItemParams by qemuMonitorTestAddItemVerbatim
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace qemuMonitorTestAddItemParams by qemuMonitorTestAddItemVerbatim
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace qemuMonitorTestAddItemParams by qemuMonitorTestAddItemVerbatim
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuMonitorTestAddItemExpect' doesn't do QMP schema validation. Since
it's the only use we can reimplement it using 'qemuMonitorTestAddItemVerbatim'
which does schema validation and remove the old code instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Any failure which happens outside is hard to debug as errors will be
reset and not raised.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function always returns 0. Remove the return value and fix callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reformat the JSON string before allocating the test data structure so
that we don't have to free it if the reformatting fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We allow (some) domain devices to have a different <seclabel/>
than the top level domain one (this is mostly to allow access to
a resource for multiple domains). Now, we do couple of sanity
checks for such <seclabel/>, e.g. when the <label/> is specified,
but '@relabel' is set to no. But what we are missing is the
opposite: when '@relabel' is set, but no <label/> was provided.
Our schema already denies such combination. Make our parser
behave the same.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160356
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is fairly trivial. Just set .memaddr attribute if a value
was set in the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2180679
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Both virtio-mem and virtio-pmem devices have '.memaddr' attribute
which controls the address where they are mapped in the guest
memory. Ideally, users do not need to specify this as QEMU does
the right thing and computes addresses automatically on startup.
But soon, we will need to record this address as it is part of
guest ABI. And also, there might be some users that want to
control this value. Now, we are in a bit of a pickle, because
both these device types already have a PCI address, therefore we
can't just use <address/> blindly. But what we can do, is
introduce <address/> under the <target/> element. This is also
more conceptual, as knobs under <target/> control guest visible
config of memory device (and .memaddr surely falls into that
category).
NB, SgxEPCDeviceInfo struct in QMP definition also has .memaddr
attribute, but because of the way we build cmd line there's no
(easy) way to set the attribute. So ignore that for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Introduced in QEMU by commit v8.0.0-7eb061b06e.
Signed-off-by: Lin Yang <lin.a.yang@intel.com>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Commit 10b5e789c5 attempts to filter out the logical processor id
in the generated data to remove noise and irrelevant changes in the
output.
cpuid-leaf 0x0B may have more than two sub-leaves though. Filter out
logical processor id from all sub-leaves of 0x0B and 0x1F (superset
of the information in 0x0B).
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 720e8f13ff
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 1347a19f75
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: b10bc8f7ab
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
We already do check that if there's <memory mode='restrictive'/>
then all <memnode/> have to be of 'restrictive' mode too. But
what we are missing the reverse: if there is <memnode/> with
'restrictive' mode, then the <memory/> has to be of the same mode
too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2208946
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The parser makes the values mandatory and also the qemu code implements
actions for those values. The formatter skips them though. Since
format+parse is used to copy the XML at startup a definition with those
values can't be started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2203709
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use DO_TEST_CAPS_LATEST to run with the latest capapbilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all of the 'audio-default-*' cases to use capabilities from
qemu-4.2 instead of the fake caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Symlinks are hard to maintain and especially un-cool when attempting to
test against real capapbilities.
Replace symlinks by real files first so that we can switch to real caps
and see the difference.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is pretty trivial, just append "mte=on/off" to -machine
arguments.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The MTE feature (introduced in QEMU commit of v5.1.0-rc1~8^2~11)
is detectable via 'qom-list-properties' for 'virt' machine type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there's not a single caller that would
call qemuDomainGetMemLockLimitBytes() with @forceVFIO set. All
callers pass false.
Drop the unneeded argument from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
One of our examples in the 'formatbackup.rst' page shows following
config:
<disk name='vda' backup='yes'/>
The schema didn't allow it though. Fix the schema as the internals were
supposed to support it (except for the bug fixed in previous patches).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the 'disk->store' property is already allocated which happens e.g.
when the disk is described by the backup XML but the optional filename
is not filled in 'virDomainBackupDefAssignStore' would not fill in the
default location.
Fix the logic to do it also if a 'virStorageSource' categorizes as
empty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With musl-1.2.3: I get the following macros defined (from
$builddir/meson-config.h):
#define WITH_LSTAT 1
#define WITH_LSTAT64 1
#define WITH_LSTAT_DECL 1
#define WITH_STAT 1
#define WITH_STAT64 1
#define WITH_STAT_DECL 1
#define WITH___LXSTAT 1
#define WITH___LXSTAT64 1
#define WITH___XSTAT 1
#define WITH___XSTAT64 1
which in turn means the virmockstathelpers.c ends up defining:
MOCK_STAT64
MOCK_LSTAT64
But with musl-1.2.4 everything changes and the set of defined
macros gets simplified to:
#define WITH_LSTAT 1
#define WITH_LSTAT_DECL 1
#define WITH_STAT 1
#define WITH_STAT_DECL 1
#define WITH___LXSTAT 1
#define WITH___XSTAT 1
which results in no MOCK_* macros defined in
virmockstathelpers.c, i.e. no stat() mocking, nada. The reason
for this simplification are these musl commits [1][2] which
removed all 64 bit aliases. And that's not what our logic for
deciding what flavor of stat() to mock counted with.
Nevertheless, we do build with Alpine Linux in our CI, so how
come we don't see this problem there? Well, simply because Alpine
Linux maintainers decided to revert the commits [3][4]. But on
distributions that use vanilla musl, this problem can be seen
easily.
1: https://git.musl-libc.org/cgit/musl/commit/?id=246f1c811448f37a44b41cd8df8d0ef9736d95f4
2: https://git.musl-libc.org/cgit/musl/commit/?id=25e6fee27f4a293728dd15b659170e7b9c7db9bc
3: https://git.alpinelinux.org/aports/commit/main/musl?id=6a5563fbb45b3d9d60678d7bbf60dbb312a2d481
4: https://git.alpinelinux.org/aports/commit/main/musl?id=a089bd852f8983623fa85e0f5755a3e25bf53c72
Resolves: https://bugs.gentoo.org/906167
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Neither of tests that use virfirewallmock.c
(networkxml2firewalltest, nwfilterebiptablestest,
nwfilterxml2firewalltest, virfirewalltest) really call
virFindFileInPath(). But at least networkxml2firewalltest calls
virFirewallDIsRegistered(), under the hood. Now, the actual
implementation connects to dbus and something, which is
definitely not what we want in our test suite.
Therefore, drop virFindFileInPath() implementation and provide
implementation for virFirewallDIsRegistered() which just returns
-2 to signal that firewalld is not registered.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Allow users controlling the multi-channel mode by adding a
'multichannel' property parsed for USB audio devices and wire up the
support in the qemu driver.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop the unnecessary disk definition and use x86_64 emulator.
For 'qemuxml2argvtest' replace the fake-caps invocation by a 4.2.0
version-locked invocation and add a '_CAPS_LATEST' invocation.
For 'qemuxml2xmltest' convert to use '_CAPS_LATEST' only.
There are no sound-device relevant changes in the output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case is a subset of what the 'sound-device' case tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the support for the persisted poll parameters and remove
restrictions on saving config when modifying them during runtime.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we allow configuring the 'poll-max-ns', 'poll-grow', and
'poll-shrink' parameters of qemu iothreads only during runtime and they
are not persisted. Add XML machinery to persist them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When preparing a SCSI <hostdev/> with passthrough of a host SCSI
adapter (i.e. no protocol), a virStorageSource structure is
initialized and stored inside virDomainHostdevDef. But the source
structure is filled in many places, with almost the same code.
Firstly, qemuProcessPrepareHostHostdev() and
qemuConnectDomainXMLToNativePrepareHostHostdev() are the same.
Secondly, qemuDomainPrepareHostdev() allocates the src structure,
only to let qemuProcessPrepareHostHostdev() fill src->path later.
Well, src->path can be filled at the same place where the src
structure is allocated (qemuDomainPrepareHostdev()) which renders
the other two functions needless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The qemuxml2argvtest does a bit of 'fixups' to parsed
virDomainDef just before generating the cmd line. For instance,
it sets PCI backend for hostdevs (to VFIO). The reason for this
is that we want to make the test host independent and thus
letting the code chose backend at runtime might render different
results on different machines. But this is not necessary, as
virpcimock (that the test uses) already creates a fake, but
stable environment (where /dev/vfio/vfio and IOMMU groups exist),
thus qemuHostdevHostSupportsPassthroughVFIO() returns true,
regardless of the actual host support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Just like we check the resulting domain XML after ATTACH and
DETACH, we should do the same after UPDATE action. This is as
simple as calling testQemuHotplugCheckResult() and providing
missing XMLs. For those test cases where no change is done, we
can just make the expected XML a symlink to the input XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This brings us one step closer to the caller of
qemuDomainAttachDeviceLive()
(qemuDomainAttachDeviceLiveAndConfig()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This is a leftover from v2.0.0-rc1~300. In v1.2.12-rc1~43 we've
introduced a code that explicitly sets vm->def->id to -1 to force
generation of inactive XML. But this was removed in the later
commit, which forgot to remove the restoration of the original
dom ID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's a comment in testQemuHotplug() trying to explain why we
need to unlock the monitor object. Well, while it might have been
correct when being introduced, it's no longer factually correct
as just any function (attach/detach/update) might talk to the
monitor and it expects the monitor to be unlocked (as it calls
qemuDomainObjEnterMonitor() + qemuDomainObjExitMonitor()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's no reason for qemuhotplugtest to reimplement which device
update function to call (testQemuHotplugUpdate()) when
qemuDomainUpdateDeviceLive() already does that. Thus, drop
testQemuHotplugUpdate() and call qemuDomainUpdateDeviceLive()
directly.
BTW: this also shows why reimplementing
qemuDomainUpdateDeviceLive() is bad idea: The
"disk-cdrom-nochange" test is succeeding only because
testQemuHotplugUpdate() supports graphics and returns an
(expected) error for every other devtype.
NB, there's still missing check that the resulting XML is the
expected one (just like we do for attach and detach), but that's
pre-existing and will be fixed later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's no reason for qemuhotplugtest to reimplement which device
attach function to call (testQemuHotplugAttach()) when
qemuDomainAttachDeviceLive() already does that. Thus, drop
testQemuHotplugAttach() and call qemuDomainAttachDeviceLive()
directly.
There's one small catch though, qemuDomainAttachDeviceLive() now
calls one monitor command more (to list all aliases). We don't
care really, because we're not testing that. Therefore, just
provide a dummy reply.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The testQemuHotplugDetach() already does call
qemuDomainDetachDeviceLive() but only for some device types. For
the rest it reports an error (but only if running test
verbosely). This makes no sense. Just call
qemuDomainDetachDeviceLive() directly and drop
testQemuHotplugDetach().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The disk private data contain information about the tray and
removability of the disk. Until recently we didn't support hotplug of
removable disks thus it wasn't a problem but now when you can hotplug a
CDROM you would not be able to open its tray.
Fix it by updating the hotplugged disk the same way we do at startup.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160435
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This makes it also work during attach. Also add a test for attaching a
watchdog with incompatible action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2187278
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can launch qemu with it, but it will not work since it's not even
probed by the kernel at the mapped address with different machine types
since they are expected to be connected to ISA and not even its newer
LPC counterpart found on q35. And it does not exist on non-x86
architectures.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting QEMU, or when hotplugging a PCI device QEMU might
lock some memory. How much? Well, that's an undecidable problem.
But despite that, we try to guess. And it more or less works,
until there's a counter example. This time, it's a guest with
both <hostdev/> and an NVMe <disk/>. I've started a simple guest
with 4GiB of memory:
# virsh dominfo fedora
Max memory: 4194304 KiB
Used memory: 4194304 KiB
And here are the amounts of memory that QEMU tried to lock,
obtained via:
grep VmLck /proc/$(pgrep qemu-kvm)/status
1) with just one <hostdev/>
VmLck: 4194308 kB
2) with just one NVMe <disk/>
VmLck: 4328544 kB
3) with one <hostdev/> and one NVMe <disk/>
VmLck: 8522852 kB
Now, what's surprising is case 2) where the locked memory exceeds
the VM memory. It almost resembles VDPA. Therefore, treat is as
such.
Unfortunately, I don't have a box with two or more spare NVMe-s
so I can't tell for sure. But setting limit too tight means QEMU
refuses to start.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2014030
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's quite difficult, if not impossible, to create a working RISC-V VMs
using the current default machine type of 'spike_v1.10'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's quite difficult, if not impossible, to create a usable ARM VMs
using the current default machine type of 'integratorcp'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
That's already the case in practice, but it's a better
experience for the user if we reject this configuration
outright instead of silently ignoring part of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit fc216db4fb introduced a mocked test with binary test data
which fails on big endian machines.
Therefore build the viracpitest test only on little endian machines.
Fixes: fc216db4fb
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a small kludge in the parser to avoid unnecessarily
blocking incoming migration from a range of recent libvirt
releases.
https://bugzilla.redhat.com/show_bug.cgi?id=2184966
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The canonical order for <os> child elements is <firmware>
then <loader>.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all tests were converted to use real capabilities we don't need
it any more. Remove it so that no new tests are added with it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace them with full files so that potential fallout from conversion
to real capabilities is more obvious and the test is simpler to add.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patch will be modifying all of them to use real capabilities.
This way it will be more obvious what will change.
Keeping the symlinks around is tedious for humans to do. Waste some
storage instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions at this point support both 'qemu-xhci' and
'nec-xhci' controllers. To allow using real capabilities restructure the
tests so that we test both controllers explicitly as well as the
selection of the default model.
Also add a xml2xml test invocation of the unified test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fake-caps version was kept as an example that the code behaves the
same with real capabilities. Now it's not needed any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With all supported qemu versions we'll pick PCIe to use for the implicit
address busses (those lacking an explicit controller) and thus the
addresses must reflect that.
Update the test to add the new flags, and fix the addresses.
Additionally add a real-caps version of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the output changes of upcoming modernization more visible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real caps and clear out flags for PCIe so that we have a real-ish
example of an aarch64 machine using mmio.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test data is effectively identical to the
'aarch64-virtio-pci-default' case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a version for 'latest' caps as well as '4.2.0'. The test
demonstrates that with a real qemu PCIe will be used instead of MMIO.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the two negative cases to use real capapbilities as well as the
positive case for situations when KVM is not used by stripping the
QEMU_CAPS_KVM flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert 'aarch64-gic-default' and 'aarch64-gic-none' cases to use real
capabilities both latest and locked to 4.2.0 to show what would happen
with a real qemu.
Note that the qemuTestSetHostArch() calls are needed as real caps
override the setting once used. Once we convert all tests to real data
this can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will be modifying the tests for selecting the GIC
version to use real capabilities. This in certain cases will show that a
different version is picked.
Using symlinks makes it inconvenient to do the modifications and
unobvious what changed.
Remove the symlinks and replace them by real output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a test that checks newly introduced virAcpi module.
There are three IORT tables from a real HW (IORT_ampere,
IORT_gigabyte and IORT_qualcomm), then there's one from a VM
(IORT_virt_aarch64) and one that I handcrafted to be empty
(IORT_empty).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This flag is intended to be used exclusively in the context of
building GLib itself and should not be passed to the compiler
by a third-party project such as libvirt.
Reverts: 77d1fa5 ("tests: Compile virgdbusmock.c with GIO_COMPILATION enabled")
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the tests that use this mock (networkxml2firewalltest,
virsystemdtest, virpolkittest) are either no-ops on Windows, or
are not compiled at all on the target.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Left behind by commit 35eb484 ("tests: remove firewalld
backend tests from virfirewalltest.c").
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix the logic selecting when to run the tests to skip unknown variants
rather than the default variant.
Fixes: 738c5bae88
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that all tests were converted to use real capabilities we don't need
it any more. Remove it so that no new tests are added with it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the rest of the outstanding tests to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities for the CPU test. The negative test case for QEMUs
without QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION is removed as the feature is
now supported by all supported qemu versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'hostdev-subsys-mdev-vfio-ccw', 'hostdev-vfio-zpci', and
'hostdev-vfio-zpci-autogenerate-fids' test cases have negative versions
which are invoked without capabilities. This does not make sense going
forward as the tests are going to be switched to real capabilities.
Remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all tests were converted to use real capabilities we don't need
it any more. Remove it so that no new tests are added with it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the last outstanding test cases for ppc64 to use real
capabilities.
In couple cases this actually fixes the test case to test what it was
intending to do.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the tested features are always present in the 'pseries' machine
with oldest-supported qemu-4.2, thus the tests don't make sense any
more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an example case showing that every feature in the 'pseries-features'
test works also with the oldest supported qemu version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuhotplugtest validates only that a given command is used but not the
arguments of the command. With this patch we'll validate the arguments
against the QMP schema thus we can catch possible issues with deprecated
commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than test with synthetic capabilities which might get outdated
reuse testQemuGetRealCaps to fetch latest capabilities and use those.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass in the whole struct rather than splitting out individual members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With modern qemu we use 'set-action' instead of 'watchdog-set-action'.
Switch to it so that later qemuhotplugtest can be switched to use real
capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All real qemus support the 'lsilogic' controller and thus would pick it
as the default rather than virtio-scsi. Since lsilogic is limited in
some aspects we should test it with the proper default model.
In the future the fake capabilities will be replaced by real
capabilities so this test would break.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use testQemuGetRealCaps to fetch real capabilities and use it in place
of the faked caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the lookup of the corresponding QMP schema used for validation of
QMP commands from 'testCompareXMLToArgvValidateSchema' to
testQemuGetRealCaps as an optional step.
This will simplify using QMP command validation in other tests which
will use testQemuGetRealCaps.
'testutilsqemuschema' module is now linked into 'test_utils_qemu' as it
contains no monitor-specific code itself and after this patch it's
referenced directly from that module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'testQemuInfoInitArgs' contains the logic to fetch and use the
capabilities for tests using 'struct testQemuInfo'.
As in certain cases use of 'struct testQemuInfo' is an overkill extract
the code to fetch the capabilities into a standalone helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Technically for the LXC capabilities lookup we don't have another test
case, but given that it shares the implementation with qemu and thus the
only thing we are missing out on is testing of filling of the fake
capabilities which doesn't make sense testing.
Remove vircapstest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case doesn't validate the returned map of cpus, just checks
that it didn't fail. We test the returned value indirectly via
qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
