When libvirt added support for firewalld, all iptables/ebtables rules
were added via the firewalld "passthrough" API when firewalld was
enabled (the "firewalld backend"), or run directly by libvirt when
firewalld was disabled (the so-called "direct
backend"). virfirewalltest.c dutifully ran each test twice, once with
the each backend enabled.
But commit b19863640d changed the code to *always* directly run
iptables/ebtables commands, and never use the firewalld passthrough
API, effectively making the direct and firewalld backends identical,
except that when libvirt receives notice that firewalld has restarted
or reloaded its rules, the firewalld backend sends an extra "iptables
-V" command via firewalld's passthrough API (and waits for a response)
prior to running all the rest of the iptables commands directly; this
assures that a newly-restarted firewalld has finished its work on the
filter tables before libvirt starts messing with it. (Because this
code is only executed in response to an event from dbus, it isn't
tested in the unit tests).
In spite of this, we still go through all the virfirewall tests twice
though - once for the direct backend, and once for the firewalld
backend, even though these take the same codepath.
In commit b19863640d I had left this double-testing in thinking that
someday we might go back to actually doing something useful with the
firewalld backend in the course of adding support for native nftables,
but I've now realized that for the case of nftables we will be *even
more* divorced from firewalld, so there is really no point in keeping
this code around any longer. (It's likely/probable that the tests will
be done twice again in the future, but it will be enough different
that it is better to remove this code and re-implement from scratch
when adding the nftables backend, rather than trying to directly
modify the existing code and end up with something even more
confusing).
This patch eliminates all the test duplication in virfirewalltest.c,
including mocking dbus, which is unnecessary since none of the tests
use dbus (for now we ensure that by explicitly setting the virfirewall
backend to DIRECT before any of the tests have run. Eventually the
concept of a "firewalld backend" will disappear completely, but that's
for another patch.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than calling these "ADD" and "REMOVE", which could be confused
with some other random items with the same names, make them more
specific by prepending "VIR_NETFILTER_" (because they will also be
used by the nftables backend) and rename them to match the
iptables/nftables operators they signify, i.e. INSERT and DELETE, just
to eliminate confusion (in particular, in case someone ever decides
that we need to also use the nftables "add" operator, which appends a
rule to a chain rather than inserting it at the beginning of the
chain).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function formats an address + prefix as, e.g. 192.168.122.0/24,
which is useful in places other than iptables. Move it to
virsocketaddr.c and make it public so that others can use it. While
moving, the bit that masks off the host bits of the address is made
optional, so that the function is more generally useful.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The network driver has put all its rules into private chains (created
by libvirt) since commit 7431b3eb9a, which was included in
libvirt-5.1.0. When the conversion was made, code was included that
would attempt to delete existing rules in the default chains, to make
it possible to upgrade libvirt without restarting the host OS.
Almost 3 years has passed, and it is doubtful that anyone will be
attempting to upgrade directly from a pre-5.1.0 libvirt to something
as new as 8.0.0 (possibly with the exception of upgrading the entire
OS to a new release, which would include also rebooting), so it is now
safe to remove this code.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto for virCommand and char * and drop the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic cleanup for virCommand, steal it on success
and remove the error label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto and remove the ret variable, as well as the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto and remove the 'ret' variable, as well as the out label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto and remove the 'ret' variable, as well as the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto and remove the 'ret' variable, as well as the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Generating command line is pretty easy - just put tb-size=XXX
onto -accel tcg part. Note, that QEMU expects the size in MiB.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/229
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After previous commit it's possible for domains to fine tune TCG
features (well, just one - tb-cache). Check that domain has TCG
enabled, otherwise the feature makes no sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It may come handy to be able to tweak TCG options, in this
specific case the size of translation block cache size (tb-size).
Since we can expect more knobs to tweak let's put them under
common element, like this:
<domain>
<features>
<tcg>
<tb-cache unit='MiB'>128</tb-cache>
</tcg>
</features>
</domain>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When using the monolithic daemon the driver for virStream is
always virFDStreamDrv and thus calling virStreamInData() results
in calling virFDStreamInData().
But things are different with split daemon, especially when a
client connects to one of hypervisor daemons (e.g. virtqemud) and
then lets the daemon connect to the storage daemon for
vol-upload/vol-download. Here, the hypervisor daemon acts like
both client and server. This is reflected by stream->driver
pointing to remoteStreamDrv, which doesn't have streamInData
callback implemented and thus vol-upload/vol-download with sparse
flag fails.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2026537
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The aim of this function is to look at a virNetClientStream and
tell whether the incoming packet (if there's one) contains data
(type VIR_NET_STREAM) or a hole (type VIR_NET_STREAM_HOLE) and
how big the section is. This function will be called from the
remote driver in one of future commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So far, virStreamInData() is effectively a wrapper over
virFDStreamInData() which means it deals with files which can be
rewound (lseek()-ed) to whatever position we need. And in fact,
that's what virFDStreamInData() does - it makes sure that the FD
is left unchanged in terms of position in the file. Skipping the
hole happens soon after - in daemonStreamHandleRead() when
virStreamSendHole() is called.
But this is about to change. Soon we will have another implementation
where we won't be dealing with FDs but virNetMessage queue and it will
be handy to pop message at the beginning of the queue. Implement and
document this new behavior.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In the QEMU driver, we allocate private source data unconditionally
for every chardev and the rest of the function just assumes it's there.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After recent cleanups, there are some pointless cleanup sections.
Clean them up.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Return the desired values directly and clean up the redundant
else branches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert all the functions that generate virCaps to use g_auto
and g_steal_pointer.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert all the users who unref their virCaps object unconditionally.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When adding the ACL check and caps getter, we assumed that
the default return value is -1, not 0 as usual.
Fix the return value on error by assigning them explicitly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
shared_module() is intended for shared objects that are
loaded at runtime using dlopen() whereas NSS plugins need to
be full-fledged shared libraries with, among other things, a
proper SONAME.
Meson seems to have become more strict about this recently,
because libnss_libvirt.so.2 gets a SONAME when I build it with
Meson 0.59.4 on Fedora 34 but doesn't when I use Meson 0.60.2
on Debian testing instead.
Either way, shared_library() was always the right function
to use for NSS plugins.
Fixes: 36780c9319
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As of ff024b60cc we are opening chardevs before starting QEMU.
However, we are also doing that before domain private directories
are created. This leaves us unable to create guest agent socket
which lives under priv->channelTargetDir.
While creating the dirs can be moved just before
qemuProcessPrepareHostBackendChardev() it's better to do it as
the very first step so that this kind of error is prevented in
future.
Fixes: ff024b60cc
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Specifically:
* use the correct notation and markup for commands, options
and arguments;
* rename arguments meta-variables to be more descriptive;
* sort options so that the most common ones come first;
* use consistent vertical spacing;
* fix a typo.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specifically, include non-option argument 'GUEST-XML-FILE'
in usage summary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specifically:
* include non-option argument 'URI' in usage summary;
* mention that it's an internal tool not meant to be
called directly;
* exit earlier if required arguments are absent.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a getopt interface and we're not using getopt, at least
directly, so even though it works relying on it feels wrong.
GOption takes care of removing any trace of the arguments it
consumes from argc and argv, leaving behind only non-option
arguments, so we can just use those standard variables.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Userfaultfd is by default allowed only for privileged processes. Since
libvirt runs QEMU unprivileged, we need to enable unprivileged access to
userfaultfd to enable post-copy migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1945420
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since the backend of the TPM is a chardev we can use the common helper
to instantiate it.
This commit also ensures proper ordering so that the backend chardev is
formatted before it's being referenced.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add handling to qemuDomainDeviceBackendChardevForeachOne and callbacks
so that we can later use 'qemuBuildChardevCommand' for TPM devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the API for qemuBuildChrChardevCommand is sane enough, we can
use it to centralize formatting of '-chardev' generally.
The 'virDomainVideoDef' doesn't use 'virDomainChrSourceDef' internally so
we create it for this occasion manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the API for qemuBuildChrChardevCommand is sane enough, we can
use it to centralize formatting of '-chardev' generally.
The 'virDomainFSDef' doesn't use 'virDomainChrSourceDef' internally so
we create it for this occasion manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the API for qemuBuildChrChardevCommand is sane enough, we can
use it to centralize formatting of '-chardev' generally.
For virtiofs we don't have a centrally stored chardev source so we
allocate one inline for temporary use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add handling to qemuDomainDeviceBackendChardevForeachOne and callbacks
so that we can later use 'qemuBuildChardevCommand' for vhost-user disks
instead of a custom formatter.
Since we don't pass the FD for the vhost-user connection to qemu all of
the setup can be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
