This patch sets or unsets the IFF_VNET_HDR flag depending on what device
is used in the VM. The manipulation of the flag is done in the open
function and is only fatal if the IFF_VNET_HDR flag could not be cleared
although it has to be (or if an ioctl generally fails). In that case the
macvtap tap is closed again and the macvtap interface torn.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: pass qemuCmdFlags to
qemudPhysIfaceConnect()
* src/util/macvtap.c src/util/macvtap.h: add vnet_hdr boolean to
openMacvtapTap(), and private function configMacvtapTap()
* src/qemu/qemu_driver.c: add extra qemuCmdFlags when calling
qemudPhysIfaceConnect()
For __virExec() this is a semantic NOP except for when fork()
fails. __virExec() would previously forget to restore the signal mask
in this case; virFork() corrects this behavior.
virFileCreate() and virDirCreate() gain the code to reset the logging
and properly deal with the signal handling race condition.
This also removes a log message that had a typo ("cannot fork o create
file '%s'") - this error is now logged in a more generic manner in
virFork() (more generic, but really just as informative, since the
fact that it's forking to create a file is immaterial to the fact that
it simply can't fork)
* src/util/util.c: use the generic virFork() in the 3 functions
virFork() contains bookkeeping that must be done any time a process
forks. Currently this includes:
1) Call virLogLock() prior to fork() and virLogUnlock() just after,
to avoid a deadlock if some other thread happens to hold that lock
during the fork.
2) Reset the logging hooks and send all child process log messages to
stderr.
3) Block all signals prior to fork(), then either a) reset the signal
mask for the parent process, or b) clear the signal mask for the
child process.
Note that the signal mask handling in __virExec erroneously fails to
restore the signal mask when fork() fails. virFork() fixes this
problem.
Other than this, it attempts to behave as closely to fork() as
possible (including preserving errno for the caller), with a couple
exceptions:
1) The return value is 0 (success) or -1 (failure), while the pid is
returned via the pid_t* argument. Like fork(), if pid < 0 there is
no child process, otherwise both the child and the parent will
return to the caller, and both should look at the return value,
which will indicate if some of the extra processing outlined above
encountered an error.
2) If virFork() returns with pid < 0 or with a return value < 0
indicating an error condition, the error has already been
reported. You can log an additional message if you like, but it
isn't necessary, and may be awkwardly extraneous.
Note that virFork()'s child process will *never* call _exit() - if a
child process is created, it will return to the caller.
* util.c util.h: add virFork() function, based on what is currently
done in __virExec().
virGetLastError returns NULL if no error has been set, not on
allocation error like virSetError assumed. Use virLastErrorObject
instead. This fixes virSetError when no error is currently stored.
Rework and simplification of teardown of the macvtap device.
Basically all devices with the same MAC address and link device are kept
alive and not attempted to be torn down. If a macvtap device linked to a
physical interface with a certain MAC address 'M' is to be created it
will automatically fail if the interface is 'up'ed and another macvtap
with the same properties (MAC addr 'M', link dev) happens to be 'up'.
This will prevent the VM from starting or the device from being attached
to a running VM. Stale interfaces are assumed to be there for some
reason and not stem from libvirt.
In the VM shutdown path, it's assuming that an interface name is always
available so that if the device type is DIRECT it can be torn down
using its name.
* src/util/macvtap.h src/libvirt_macvtap.syms: change of deleting routine
* src/util/macvtap.c: cleanups and change of deleting routine
* src/qemu/qemu_driver.c: change cleanup on shutdown
* src/qemu/qemu_conf.c: don't delete Macvtap in qemudPhysIfaceConnect()
This part adds the helper code to setup and tear down macvtap devices
using direct communication with the device driver via netlink sockets.
The rather short messages received from the netlink layer are now
written into a dynamically allocated buffer
* src/util/macvtap.h src/util/macvtap.c: provides the new module
* po/POTFILES.in: the module contains translated strings
This part adds support to domain_conf.{c|h} for parsing the new
interface XML of type 'direct'. The parsed mode is now stored as
an int.
* src/conf/domain_conf.c src/conf/domain_conf.h: extend parsing code
* src/util/macvtap.h: empty header to not break compilation
This patch adds build support for libvirt checking for certain contents
of /usr/include/linux/if_link.h to see whether macvtap support is
compilable on that system. One can disable macvtap support in libvirt
via --without-macvtap passed to configure.
* configure.ac src/Makefile.am: new build support
* src/libvirt_macvtap.syms: list of exported symbols
* src/util/macvtap.c: empty module to not break compilation
All callers now pass a NULL virConnectPtr into the USB/PCi device
iterator functions. Therefore the virConnectPtr arg can now be
removed from these functions
* src/util/hostusb.h, src/util/hostusb.c: Remove virConnectPtr
from usbDeviceFileIterate
* src/util/pci.c, src/util/pci.h: Remove virConnectPtr arg from
pciDeviceFileIterate
* src/qemu/qemu_security_dac.c, src/security/security_selinux.c: Update
to drop redundant virConnectPtr arg
* src/util/util.h (virAsprintf): Remove ATTRIBUTE_RETURN_CHECK, since
it is perfectly fine to ignore the return value, now that the pointer
is guaranteed to be set to NULL upon failure.
* src/util/storage_file.c (absolutePathFromBaseFile): Remove now-
unnecessary use of ignore_value.
* src/util/storage_file.c (absolutePathFromBaseFile): While this use
of virAsprintf is slightly cleaner than using stpncpy(stpcpy(...,
it does impose an artificial limitation on the length of the base_file
name. Rather than asserting that it does not exceed INT_MAX, return
NULL when it does.
When configured with --enable-gcc-warnings, it didn't even compile.
* src/util/storage_file.c: Include <assert.h>.
(absolutePathFromBaseFile): Assert that converting size_t to int is valid.
Reverse length/string args to match "%.*s".
Explicitly ignore the return value of virAsprintf.
* src/util/storage_file.c: Include "dirname.h".
(absolutePathFromBaseFile): Rewrite not to leak, and to require
fewer allocations.
* bootstrap (modules): Add dirname-lgpl.
* .gnulib: Update submodule to the latest.
Similar fix as previous one but for fork() usage when creating
a file or directory
* src/util/util.c: virLogLock() and virLogUnlock() around fork()
in virFileCreate() and virDirCreateSimple()
Ad pointed out by Dan Berrange:
So if some thread in libvirtd is currently executing a logging call,
while another thread calls virExec(), that other thread no longer
exists in the child, but its lock is never released. So when the
child then does virLogReset() it deadlocks.
The only way I see to address this, is for the parent process to call
virLogLock(), immediately before fork(), and then virLogUnlock()
afterwards in both parent & child. This will ensure that no other
thread
can be holding the lock across fork().
* src/util/logging.[ch] src/libvirt_private.syms: export virLogLock() and
virLogUnlock()
* src/util/util.c: lock just before forking and unlock just after - in
both parent and child.
* src/util/util.c (virGetUserID, virGetGroupID): In the unlikely event
that sysconf(_SC_GETPW_R_SIZE_MAX) fails, don't use -1 as the size in
the subsequent allocation.
On RHEL-5 the qemu-kvm binary is located in /usr/libexec.
To reduce confusion for people trying to run upstream libvirt
on RHEL-5 machines, make the qemu driver look in /usr/libexec
for the qemu-kvm binary.
To make this work, I modified virFindFileInPath to handle an
absolute path correctly. I also ran into an issue where
NULL was sometimes being passed for the file parameter
to virFindFileInPath; it didn't crash prior to this patch
since it was building paths like /usr/bin/(null). This
is non-standard behavior, though, so I added a NULL
check at the beginning.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/util/util.c (virGetUserEnt): In the unlikely event that
sysconf(_SC_GETPW_R_SIZE_MAX) fails, don't use -1 as the size in
the subsequent allocation.
virFileMakePath is a recursive function that was creates a buffer
PATH_MAX bytes long for each recursion (one recursion for each element
in the path). This changes it to have no buffers on the stack, and to
allocate just one buffer total, no matter how many elements are in the
path. Because the modified algorithm requires a char* to be passed in
rather than const char *, it is now 2 functions - a toplevel API
function that remains identical in function, and a 2nd helper function
called for the recursions, which 1) doesn't allocate anything, and 2)
takes a char* arg, so it can modify the contents.
* src/util/util.c: rewrite virFileMakePath
* src/util/json.c, src/util/json.h: Declare returned strings
to be const
* src/qemu/qemu_monitor.c: Wire up JSON mode for qemuMonitorGetPtyPaths
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Fix
const correctness. Add missing error message in the function
qemuMonitorJSONGetAllPCIAddresses. Add implementation of the
qemuMonitorGetPtyPaths function calling 'query-chardev'.
Certain hypervisors (like qemu/kvm) map the PCI bar(s) on
the host when doing device passthrough. This can lead to a race
condition where the hypervisor is still cleaning up the device while
libvirt is trying to re-attach it to the host device driver. To avoid
this situation, we look through /proc/iomem, and if the hypervisor is
still holding onto the bar (denoted by the string in the matcher variable),
then we can wait around a bit for that to clear up.
v2: Thanks to review by DV, make sure we wait the full timeout per-device
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The patches to add ACS checking to PCI device passthrough
introduced a bug. With the current code, if you try to
passthrough a device on the root bus (i.e. bus 0), then
it denies the passthrough. This is because the code in
pciDeviceIsBehindSwitchLackingACS() to check for a parent
device doesn't take into account the possibility of the
root bus. If we are on the root bus, it means we
legitimately can't find a parent, and it also means that
we don't have to worry about whether ACS is enabled.
Therefore return 0 (indicating we don't lack ACS) from
pciDeviceIsBehindSwitchLackingACS().
Signed-off-by: Chris Lalancette <clalance@redhat.com>
These functions create a new file or directory with the given
uid/gid. If the flag VIR_FILE_CREATE_AS_UID is given, they do this by
forking a new process, calling setuid/setgid in the new process, and
then creating the file. This is better than simply calling open then
fchown, because in the latter case, a root-squashing nfs server would
create the new file as user nobody, then refuse to allow fchown.
If VIR_FILE_CREATE_AS_UID is not specified, the simpler tactic of
creating the file/dir, then chowning is is used. This gives better
results in cases where the parent directory isn't on a root-squashing
NFS server, but doesn't give permission for the specified uid/gid to
create files. (Note that if the fork/setuid method fails to create the
file due to access privileges, the parent process will make a second
attempt using this simpler method.)
If the bit VIR_FILE_CREATE_ALLOW_EXIST is set in the flags, an
existing file/directory will not cause an error; in this case, the
function will simply set the permissions of the file/directory to
those requested. If VIR_FILE_CREATE_ALLOW_EXIST is not specified, an
existing file/directory is considered (and reported as) an error.
Return from both of these functions is 0 on success, or the value of
errno if there was a failure.
* src/util/util.[ch]: add the 2 new util functions
* src/util/logging.c (virLogMessage): Include "ignore-value.h".
Use it to ignore the return value of safewrite.
Use STDERR_FILENO, rather than "2".
* bootstrap (modules): Add ignore-value.
* gnulib: Update to latest, for ignore-value that is now LGPLv2+.
I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
VIR_DEBUG
VIR_DEBUG0
VIR_ERROR
VIR_ERROR0
VIR_INFO
VIR_WARN
VIR_WARN0
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
New pciDeviceIsAssignable() function for checking whether a given PCI
device can be assigned to a guest was added. Currently it only checks
for ACS being enabled on all PCIe switches between root and the PCI
device. In the future, it could be the right place to check whether a
device is unbound or bound to a stub driver.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Until recently, some gnulib-generated replacement headers
included *other* headers that were not strictly necessary,
thus masking the need in this file for an explicit <stdlib.h>.
* src/util/util.c: Include <stdlib.h> for declarations of e.g.,
strtol, random_r, getenv, etc.
With the introduction virDispatchError, hook function errors are
never sent through the error callback, so users will never see
these messages.
Fix this by calling virDispatchError after hook failure.
