On F17 at least, every time libvirtd starts we get this in syslog:
libvirtd: Could not find keytab file: /etc/libvirt/krb5.tab: No such file or directory
This comes from cyrus-sasl, and happens regardless of whether the
gssapi plugin is requested, which is what actually uses
/etc/libvirt/krb5.tab.
While cyrus-sasl shouldn't complain, we can easily make it shut up by
commenting out the keytab value by default.
Also update the keytab comment to the more modern one from qemu's
sasl config file.
(cherry picked from commit fe772f24a6)
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=868483
virNetworkUpdate, virNetworkDefine, and virNetworkCreate all three
allow network definitions to contain multiple <portgroup> elements
with default='yes'. Only a single default portgroup should be allowed
for each network.
This patch updates networkValidate() (called by both
virNetworkCreate() and virNetworkDefine()) and
virNetworkDefUpdatePortGroup (called by virNetworkUpdate() to not
allow multiple default portgroups.
(cherry picked from commit 6f8a8b30c9)
This fixes the problem reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=868389
Previously, the dnsmasq hosts file (used for static dhcp entries, and
addnhosts file (used for additional dns host entries) were only
created/referenced on the dnsmasq commandline if there was something
to put in them at the time the network was started. Once we can update
a network definition while it's active (which is now possible with
virNetworkUpdate), this is no longer a valid strategy - if there were
0 dhcp static hosts (resulting in no reference to the hosts file on the
commandline), then one was later added, the commandline wouldn't have
linked dnsmasq up to the file, so even though we create it, dnsmasq
doesn't pay any attention.
The solution is to just always create these files and reference them
on the dnsmasq commandline (almost always, anyway). That way dnsmasq
can notice when a new entry is added at runtime (a SIGHUP is sent to
dnsmasq by virNetworkUdpate whenever a host entry is added or removed)
The exception to this is that the dhcp static hosts file isn't created
if there are no lease ranges *and* no static hosts. This is because in
this case dnsmasq won't be setup to listen for dhcp requests anyway -
in that case, if the count of dhcp hosts goes from 0 to 1, dnsmasq
will need to be restarted anyway (to get it listening on the dhcp
port). Likewise, if the dhcp hosts count goes from 1 to 0 (and there
are no dhcp ranges) we need to restart dnsmasq so that it will stop
listening on port 67. These special situations are handled in the
bridge driver's networkUpdate() by checking for ((bool)
nranges||nhosts) both before and after the update, and triggering a
dnsmasq restart if the before and after don't match.
(cherry picked from commit 1cb1f9dabf)
https://bugzilla.redhat.com/show_bug.cgi?id=866364
pointed out a crash due to virNetworkObjAssignDef free'ing
network->newDef without NULLing it afterward. A fix for this is in
upstream commit b7e9202401. While the
NULLing of newDef was a legitimate fix, newDef should have already
been empty (NULL) anyway (as indicated in the comment that was deleted
by that commit).
The reason that newDef had a non-NULL value (i.e. the root cause) was
that networkStartNetwork() had failed after populating
network->newDef, but then neglected to free/NULL newDef in the
cleanup.
(A bit of background here: network->newDef should contain the
persistent config of a network when a network is active (and of course
only when it is persisten), and NULL at all other times. There is also
a network->def which should contain the persistent definition of the
network when it is inactive, and the current live state at all other
times. The idea is that you can make changes to network->newDef which
will take effect the next time the network is restarted, but won't
mess with the current state of the network (virDomainObj has a similar
pair of virDomainDefs that behave in the same fashion). Personally I
think there should be a network->live and network->config, and the
location of the persistent config should *always* be in
network->config, but that's for a later cleanup).
Since I love things to be symmetric, I created a new function called
virNetworkObjUnsetDefTransient(), which reverses the effects of
virNetworkObjSetDefTransient(). I don't really like the name of the
new function, but then I also didn't really like the name of the old
one either (it's just named that way to match a similar function in
the domain conf code).
(cherry picked from commit 78fab2770b)
AUTHORS.in tracks the maintainers, as well as some folks who were
previously in AUTHORS but don't have a git commit with proper
attribution.
Generated output is sorted alphabetically and lacks pretty spacing, so
tweak AUTHORS.in to follow the same format.
Additionally, drop the syntax-check rule that previously validated
AUTHORS against git log.
(cherry picked from commit 7b21981cdb)
Conflicts:
.mailmap
AUTHORS
Several people have reported that if the .gnulib submodule is dirty,
then 'make' will go into an infinite loop attempting to rerun bootstrap,
because that never cleans up the dirty submodule. By default, we
should halt and make the user investigate, but if the user doesn't
know why or care that the submodule is dirty, I also added the ability
to 'make CLEAN_SUBMODULE=1' to get things going again.
Also, while testing this, I noticed that when a submodule update was
needed, 'make' would first run autoreconf, then bootstrap (which
reruns autoreconf); adding a strategic dependency allows for less work.
* .gnulib: Update to latest, for maint.mk improvements.
* cfg.mk (_autogen): Also hook maint.mk, to run before autoreconf.
* autogen.sh (bootstrap): Refuse to run if gnulib is dirty, unless
user requests discarding gnulib changes.
(cherry picked from commit c5f162200c)
Relabeling tapfd right after the tap device is created.
qemuPhysIfaceConnect is common function called both for static
netdevs and for hotplug netdevs.
(cherry picked from commit 4492ef7f48)
which frees all allocated memory but doesn't set the passed pointer to
NULL. Therefore, we must do it ourselves. This is causing actual
libvirtd crash: Basically, when doing 'virsh net-edit' the newDef should
be dropped. And the memory is freed, indeed. However, the pointer is
not set to NULL but kept instead. And the next duo of calls 'virsh
net-start' and 'virsh net-destroy' starts the disaster. The latter one
does the same as 'virsh destroy'; it sees that newDef is nonNULL so it
replaces def with newDef (which has been freed already as said a few
lines above). Therefore any subsequent call accessing def will hit the ground.
(cherry picked from commit b7e9202401)
It should relabel tapfd of virtual network of type VIR_DOMAIN_NET_TYPE_DIRECT
rather than VIR_DOMAIN_NET_TYPE_NETWORK and VIR_DOMAIN_NET_TYPE_BRIDGE
(commit ae368ebfcc introduced this bug)
Caution: The context of the two hunks is identical other than indentation.
Please be extremely cautious of where the patch gets applied.
(cherry picked from commit 89b63f0ad4)
In commit 9674f2c637, I forgot to change
selabel_lookup with the other functions, so this one-liner does exactly
that.
(cherry picked from commit 6676c1fc8f)
BZ:https://bugzilla.redhat.com/show_bug.cgi?id=851981
When using macvtap, a character device gets first created by
kernel with name /dev/tapN, its selinux context is:
system_u:object_r:device_t:s0
Shortly, when udev gets notification when new file is created
in /dev, it will then jump in and relabel this file back to the
expected default context:
system_u:object_r:tun_tap_device_t:s0
There is a time gap happened.
Sometimes, it will have migration failed, AVC error message:
type=AVC msg=audit(1349858424.233:42507): avc: denied { read write } for
pid=19926 comm="qemu-kvm" path="/dev/tap33" dev=devtmpfs ino=131524
scontext=unconfined_u:system_r:svirt_t:s0:c598,c908
tcontext=system_u:object_r:device_t:s0 tclass=chr_file
This patch will label the tapfd device before qemu process starts:
system_u:object_r:tun_tap_device_t:MCS(MCS from seclabel->label)
(cherry picked from commit ae368ebfcc)
We are currently able to work only with non-translated SELinux
contexts, but we are using functions that work with translated
contexts throughout the code. This patch swaps all SELinux context
translation relative calls with their raw sisters to avoid parsing
problems.
The problems can be experienced with mcstrans for example. The
difference is that if you have translations enabled (yum install
mcstrans; service mcstrans start), fgetfilecon_raw() will get you
something like 'system_u:object_r:virt_image_t:s0', whereas
fgetfilecon() will return 'system_u:object_r:virt_image_t:SystemLow'
that we cannot parse.
I was trying to confirm that the _raw variants were here since the dawn of
time, but the only thing I see now is that it was imported together in
the upstream repo [1] from svn, so before 2008.
Thanks Laurent Bigonville for finding this out.
[1] http://oss.tresys.com/git/selinux.git
(cherry picked from commit 9674f2c637)
I hit this problem recently when trying to create a bridge with an IPv6
address on a 3.2 kernel: dnsmasq (and, further, radvd) would not bind to
the given address, waiting 20s and then giving up with -EADDRNOTAVAIL
(resp. exiting immediately with "error parsing or activating the config
file", without libvirt noticing it, BTW). This can be reproduced with (I
think) any kernel >= 2.6.39 and the following XML (to be used with
"virsh net-create"):
<network>
<name>test-bridge</name>
<bridge name='testbr0' />
<ip family='ipv6' address='fd00::1' prefix='64'>
</ip>
</network>
(it happens even when you have an IPv4, too)
The problem is that since commit [1] (which, ironically, was made to
“help IPv6 autoconfiguration”) the linux bridge code makes bridges
behave like “real” devices regarding carrier detection. This makes the
bridges created by libvirt, which are started without any up devices,
stay with the NO-CARRIER flag set, and thus prevents DAD (Duplicate
address detection) from happening, thus letting the IPv6 address flagged
as “tentative”. Such addresses cannot be bound to (see RFC 2462), so
dnsmasq fails binding to it (for radvd, it detects that "interface XXX
is not RUNNING", thus that "interface XXX does not exist, ignoring the
interface" (sic)). It seems that this behavior was enhanced somehow with
commit [2] by avoiding setting NO-CARRIER on empty bridges, but I
couldn't reproduce this behavior on my kernel. Anyway, with the “dummy
tap to set MAC address” trick, this wouldn't work.
To fix this, the idea is to get the bridge's attached device to be up so
that DAD can happen (deactivating DAD altogether is not a good idea, I
think). Currently, libvirt creates a dummy TAP device to set the MAC
address of the bridge, keeping it down. But even if we set this device
up, it is not RUNNING as soon as the tap file descriptor attached to it
is closed, thus still preventing DAD. So, we must modify the API a bit,
so that we can get the fd, keep the tap device persistent, run the
daemons, and close it after DAD has taken place. After that, the bridge
will be flagged NO-CARRIER again, but the daemons will be running, even
if not happy about the device's state (but we don't really care about
the bridge's daemons doing anything when no up interface is connected to
it).
Other solutions that I envisioned were:
* Keeping the *-nic interface up: this would waste an fd for each
bridge during all its life. May be acceptable, I don't really
know.
* Stop using the dummy tap trick, and set the MAC address directly
on the bridge: it is possible since quite some time it seems,
even if then there is the problem of the bridge not being
RUNNING when empty, contrary to what [2] says, so this will need
fixing (and this fix only happened in 3.1, so it wouldn't work
for 2.6.39)
* Using the --interface option of dnsmasq, but I saw somewhere
that it's not used by libvirt for backward compatibility. I am
not sure this would solve this problem, though, as I don't know
how dnsmasq binds itself to it with this option.
This is why this patch does what's described earlier.
This patch also makes radvd start even if the interface is
“missing” (i.e. it is not RUNNING), as it daemonizes before binding to
it, and thus sometimes does it after the interface has been brought down
by us (by closing the tap fd), and then originally stops. This also
makes it stop yelling about it in the logs when the interface is down at
a later time.
[1]
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=1faa4356a3bd89ea11fb92752d897cff3a20ec0e
[2]
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=b64b73d7d0c480f75684519c6134e79d50c1b341
(cherry picked from commit db488c7917)
When p2p migration fails early because qemuMigrationIsAllowed or
qemuMigrationIsSafe say migration should be cancelled, we fail to clear
the migration-out async job. As a result of that, further APIs called
for the same domain may fail with Timed out during operation: cannot
acquire state change lock.
Reported by Guido Winkelmann.
(cherry picked from commit 837993d845)
On F17 at least, this command fails:
$ sudo /usr/sbin/lvcreate --name sparsetest -L 0K --virtualsize 16384K vgvirt
Unable to create new logical volume with no extents
Which is unfortunate since allocation=0 is what virt-manager tries to use
by default.
Rather than telling the user 'don't do that', let's just give them the
smallest allocation possible if alloc=0 is requested.
https://bugzilla.redhat.com/show_bug.cgi?id=866481
(cherry picked from commit 9f0e9cba27)
libssh2 unfortunately doesn't support symbol versioning so RPM can't
figure out what version is needed for the currently installed libvirt
package. This patch adds a runtime requirement, so that the correct
version of libssh2 can be installed along with libvirt.
(cherry picked from commit cb4f41b8d0)
Libssh2 transport support was enabled lately but the spec file wasn't
updated to take this into account. This caused libvirt to be built
without libssh2 support in Red Hat based OSes.
(cherry picked from commit 1e25c54f66)
There was a crash possible when both <boot dev... and <boot
order... were specified due to virDomainDefParseBootXML() erroring out
before setting *tmp (which was free'd in cleanup). As a fix, I
created this cleanup that uses one pointer for all the temporary
stored XPath strings and values, plus this pointer is correctly
initialized to NULL.
(cherry picked from commit 280b8c9e7c)
Done with:
sed -i -e "s/no pool with matching uuid/no storage pool with matching uuid/g" src/storage/storage_driver.c
sed -i -e 's/"%s", _("no storage pool with matching uuid")/_("no storage pool with matching uuid %s"), obj->uuid/g' src/storage/storage_driver.c
sed -i -e 's/"%s", _("storage pool is not active")/_("storage pool '%s' is not active"), pool->def->name/g' src/storage/storage_driver.c
And a couple fixups before, during, and after, and a manual inspection
pass to make sure nothing was wonky.
(cherry picked from commit 3af8280baf)
When adding variants of parameter setting APIs which accepted
flags, the existing APIs were all adapted internally to pass
VIR_DOMAIN_AFFECT_CURRENT to the new API. The QEMU impl
qemuSetSchedularParameters was an exception, which instead
used VIR_DOMAIN_AFFECT_LIVE. Change this to match other
compatibility scenarios, so that calling
virDomainSetSchedularParameters(dom, params, nparams);
Has the same semantics as
virDomainSetSchedularParametersFlags(dom, params, nparams, 0);
And
virDomainSetSchedularParametersFlags(dom, params, nparams, VIR_DOMAIN_AFFECT_CURRENT);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 4da9b2c163)
With our latest s/[a-z]+ReportError/virReportError/ rewrite
(47ab34e2) we forgot to update arm part of the code.
(cherry picked from commit 84a8917b8a)
curl_global_init is not thread-safe. curl_easy_init might call
curl_global_init when it was no called before. But curl_easy_init
can be called from different threads by the ESX driver. Therefore,
call curl_global_init from virInitialize to stop curl_easy_init from
calling it.
Reported by Benjamin Wang.
(cherry picked from commit 458c499841)
When both kvmclock and kvm_pv_eoi are configured (either disabled or
enabled) libvirt will generate invalid CPU specification due to the
fact that even though kvmclock causes the CPU to be specified, it
doesn't set have_cpu flag to true (and the new kvm_pv_eoi as well).
This patch fixes the issue and adds a test exactly for that to show
that it is fixed correctly (and also to keep it that way in the future
of course).
(cherry picked from commit 5d692cc714)
libcurl uses a SIGALRM in combination with sigsetjmp/siglongjmp to be
able to abort a DNS lookup when it takes too long. The problem with this
in a multi-threaded application is that the signal handler for SIGALRM
and the call to siglongjmp can be executed on a thread that is different
from the one that initially did the SIGALRM setup and the call to
sigsetjmp. In the reported case this triggered a segfault.
Disable libcurl's use of signals to avoid this situation. This has the
disadvantage of losing the ability to abort synchronous DNS lookups which
might result in libcurl getting stuck in a DNS lookup in the worst case.
When libcurl was build with an asynchronous DNS backend such as c-ares
then there is no problem because the timeout mechanism works without
signals here anyway.
Reported by Benjamin Wang.
(cherry picked from commit 0821ea6b3c)
The output buffer for virFileReadAll was too small for systems with
more than 30 CPUs which leads to a log entry and incorrect behavior.
The new size will be sufficient for the current
architectural limits.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
(cherry picked from commit 4bdc8606e6)
I noticed that in two places, we require util-linux, and in a third,
we require util-linux-ng. On Fedora (I tested F15 through rawhide),
util-linux-ng is obsoleted by util-linux; on RHEL 6, util-linux
is obsoleted by util-linux-ng. That is, on either platform, either
name will get you the correct package installed (where the preferred
name on fedora is util-linux, and on RHEL 6 is util-linux-ng). But
on RHEL 5, there is no util-linux-ng
* libvirt.spec.in (Requires): Use util-linux, not util-linux-ng.
(cherry picked from commit a9087ad16d)
Use of the wrong attribute name caused the table of contents to
be useless. Fix suggested by Daniel P. Berrange.
* docs/migration.html.in: Use correct anchoring attribute.
(cherry picked from commit eeb8c924ce)
Correct the check for the return value of virStrcpyStatic()
when copying port-profile names. Fixes Open vSwitch ports
which utilize port-profiles from network definitions.
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
(cherry picked from commit 83aebf6de4)
Commit c579d6b added a sledgehammer to silence spurious warnings from
gcc 4.2, but in the process, it also silenced useful warnings from
gcc 4.3 through 4.5. As a result, a bug slipped in to commit 0caccb58.
Tested with FreeBSD (gcc 4.2.1), RHEL 6.3 (gcc 4.4), and F17 (gcc 4.7.2),
where the former didn't trip on spurious warnings, and where the latter
two detected a revert of 2b804cf.
* m4/virt-compile-warnings.m4 (-Wno-format): Probe for the actual
spurious message, to once again allow gcc 4.4 to use -Wformat.
(cherry picked from commit 814a8deaa1)
When doing snapshots, the filesystem freeze function used the agent
entering function that expects the qemud_driver unlocked. This might
cause a deadlock of the qemu driver if the agent does not respond.
The only call path of this function has the qemud_driver locked, so this
patch changes the entering functions to those expecting the driver
locked.
(cherry picked from commit e0316b5ebd)
There was an inverted return value in lxcCgroupControllerActive().
The function assumes cgroups are active and do couple of checks
to prove that. If any of them fails, false is returned. Therefore,
at the end, after all checks are done we must return true, not false.
(cherry picked from commit 0dddd680c2)
Commit f1a43a8 missed one side of an #if/#else.
* src/util/processinfo.c (virProcessInfoGetAffinity): Use correct
bitmap operation.
(cherry picked from commit 9038ac65da)
Currently if you build on a machine that does not support SELinux we end up
with the default mount point being /selinux, since this is moved to
/sys/fs/selinux, we should start defaulting there.
I believe this is causing a bug in libvirt-lxc when /selinux does not exists,
even though /sys/fs/selinux exists.
(cherry picked from commit aa696e1846)
Minimal CPU "parser" for armhf to avoid compile time warning.
Signed-off-by: Chuck Short <chuck.short@canonical.com>
(cherry picked from commit 2d0a777b3d)
The result is indeterminate for NULL argument to python
functions as follows. It's better to return negative value in
these situations.
PyObject_IsTrue will segfault if the argument is NULL
PyFloat_AsDouble(NULL) is -1.000000
PyLong_AsUnsignedLongLong(NULL) is 0.000000
(cherry picked from commit 4c6be02a3e)
In Xen 4.2, xs.h is deprecated in favor of xenstore.h. xs.h now
contains
#warning xs.h is deprecated use xenstore.h instead
#include <xenstore.h>
which fails compilation when warnings are treated as errors.
Introduce a configure-time check for xenstore.h and if found,
use it instead of xs.h.
(cherry picked from commit 416eca189b)
For historical compat we use 'itanium' as the arch name, so
if the QEMU binary suffix is 'ia64' we need to translate it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 3887afbb6b)
If the qemuAgentClose method is called from a place which holds
the domain lock, it is theoretically possible to get a deadlock
in the agent destroy callback. This has not been observed, but
the equivalent code in the QEMU monitor destroy callback has seen
a deadlock.
Remove the redundant locking while unrefing the object and the
bogus assignment
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 362d04779c)
Some users report (very rarely) seeing a deadlock in the QEMU
monitor callbacks
Thread 10 (Thread 0x7fcd11e20700 (LWP 26753)):
#0 0x00000030d0e0de4d in __lll_lock_wait () from /lib64/libpthread.so.0
#1 0x00000030d0e09ca6 in _L_lock_840 () from /lib64/libpthread.so.0
#2 0x00000030d0e09ba8 in pthread_mutex_lock () from /lib64/libpthread.so.0
#3 0x00007fcd162f416d in virMutexLock (m=<optimized out>)
at util/threads-pthread.c:85
#4 0x00007fcd1632c651 in virDomainObjLock (obj=<optimized out>)
at conf/domain_conf.c:14256
#5 0x00007fcd0daf05cc in qemuProcessHandleMonitorDestroy (mon=0x7fcccc0029e0,
vm=0x7fcccc00a850) at qemu/qemu_process.c:1026
#6 0x00007fcd0db01710 in qemuMonitorDispose (obj=0x7fcccc0029e0)
at qemu/qemu_monitor.c:249
#7 0x00007fcd162fd4e3 in virObjectUnref (anyobj=<optimized out>)
at util/virobject.c:139
#8 0x00007fcd0db027a9 in qemuMonitorClose (mon=<optimized out>)
at qemu/qemu_monitor.c:860
#9 0x00007fcd0daf61ad in qemuProcessStop (driver=driver@entry=0x7fcd04079d50,
vm=vm@entry=0x7fcccc00a850,
reason=reason@entry=VIR_DOMAIN_SHUTOFF_DESTROYED, flags=flags@entry=0)
at qemu/qemu_process.c:4057
#10 0x00007fcd0db323cf in qemuDomainDestroyFlags (dom=<optimized out>,
flags=<optimized out>) at qemu/qemu_driver.c:1977
#11 0x00007fcd1637ff51 in virDomainDestroyFlags (
domain=domain@entry=0x7fccf00c1830, flags=1) at libvirt.c:2256
At frame #10 we are holding the domain lock, we call into
qemuProcessStop() to cleanup QEMU, which triggers the monitor
to close, which invokes qemuProcessHandleMonitorDestroy() which
tries to obtain the domain lock again. This is a non-recursive
lock, hence hang.
Since qemuMonitorPtr is a virObject, the unref call in
qemuProcessHandleMonitorDestroy no longer needs mutex
protection. The assignment of priv->mon = NULL, can be
instead done by the caller of qemuMonitorClose(), thus
removing all need for locking.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 25f582e36a)
If QEMU quits immediately after we opened the monitor it was
possible we would skip the clearing of the SELinux process
socket context
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 0b62c0736a)
When calling qemuProcessKill from the virDomainDestroy impl
in QEMU, do not ignore the return value. This ensures that
if QEMU fails to respond to SIGKILL, the caller will know
about the failure.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit f1b4021b38)
Depending on the scenario in which LXC containers exit, it is
possible for the EOF callback of the LXC monitor to deadlock
the driver.
#0 0x00000038a0a0de4d in __lll_lock_wait () from /lib64/libpthread.so.0
#1 0x00000038a0a09ca6 in _L_lock_840 () from /lib64/libpthread.so.0
#2 0x00000038a0a09ba8 in pthread_mutex_lock () from /lib64/libpthread.so.0
#3 0x00007f4bd9579d55 in virMutexLock (m=<optimized out>) at util/threads-pthread.c:85
#4 0x00007f4bcacc7597 in lxcDriverLock (driver=0x7f4bc40c8290) at lxc/lxc_conf.h:81
#5 virLXCProcessMonitorEOFNotify (mon=<optimized out>, vm=0x7f4bb4000b00) at lxc/lxc_process.c:581
#6 0x00007f4bd9645c91 in virNetClientCloseLocked (client=client@entry=0x7f4bb4009e60)
at rpc/virnetclient.c:554
#7 0x00007f4bd96460f8 in virNetClientIOEventLoopPassTheBuck (thiscall=0x0, client=0x7f4bb4009e60)
at rpc/virnetclient.c:1306
#8 virNetClientIOEventLoopPassTheBuck (client=0x7f4bb4009e60, thiscall=0x0)
at rpc/virnetclient.c:1287
#9 0x00007f4bd96467a2 in virNetClientCloseInternal (reason=3, client=0x7f4bb4009e60)
at rpc/virnetclient.c:589
#10 virNetClientCloseInternal (client=0x7f4bb4009e60, reason=3) at rpc/virnetclient.c:561
#11 0x00007f4bcacc4a82 in virLXCMonitorClose (mon=0x7f4bb4000a00) at lxc/lxc_monitor.c:201
#12 0x00007f4bcacc55ac in virLXCProcessCleanup (reason=<optimized out>, vm=0x7f4bb4000b00,
driver=0x7f4bc40c8290) at lxc/lxc_process.c:240
#13 virLXCProcessStop (driver=0x7f4bc40c8290, vm=vm@entry=0x7f4bb4000b00,
reason=reason@entry=VIR_DOMAIN_SHUTOFF_DESTROYED) at lxc/lxc_process.c:735
#14 0x00007f4bcacc5bd2 in virLXCProcessAutoDestroyDom (payload=<optimized out>,
name=0x7f4bb4003c80, opaque=0x7fff41af2df0) at lxc/lxc_process.c:94
#15 0x00007f4bd9586649 in virHashForEach (table=0x7f4bc409b270,
iter=iter@entry=0x7f4bcacc5ab0 <virLXCProcessAutoDestroyDom>, data=data@entry=0x7fff41af2df0)
at util/virhash.c:514
#16 0x00007f4bcacc52d7 in virLXCProcessAutoDestroyRun (driver=driver@entry=0x7f4bc40c8290,
conn=conn@entry=0x7f4bb8000ab0) at lxc/lxc_process.c:120
#17 0x00007f4bcacca628 in lxcClose (conn=0x7f4bb8000ab0) at lxc/lxc_driver.c:128
#18 0x00007f4bd95e67ab in virReleaseConnect (conn=conn@entry=0x7f4bb8000ab0) at datatypes.c:114
When the driver calls virLXCMonitorClose, there is really no
need for the EOF callback to be invoked in this case, since
the caller can easily handle events itself. In changing this,
the monitor needs to take a deep copy of the callback list,
not merely a reference.
Also adds debug statements in various places to aid
troubleshooting
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 36c1fc189d)
Xen upstream c/s 24102:dc8e55c9 bumped the sysctl version to 9.
Support this sysctl version in the xen_hypervisor sub-driver.
(cherry picked from commit 371ddc9866)
