Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports
all share the same namespace, they are all defined as controllers of
type='pci' in libvirt (but with a differing model attribute). Each of
these controllers has a certain connection type upstream, allows
certain connection types downstream, and each can either allow a
single downstream connection at slot 0, or connections from slot 1 -
31.
Right now, we only support the pci-root and pci-bridge devices, both
of which only allow PCI devices to connect, and both which have usable
slots 1 - 31. In preparation for adding other types of controllers
that have different capabilities, this patch 1) adds info to the
qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets
those capabilities appropriately for pci-root and pci-bridge devices,
and 3) validates that the controller being connected to is the proper
type when allocating slots or validating that a user-selected slot is
appropriate for a device..
Having this infrastructure in place will make it much easier to add
support for the other PCI controller types.
While it would be possible to do all the necessary checking by just
storing the controller model in the qemyuDomainPCIAddressBus, it
greatly simplifies all the validation code to also keep a "flags",
"minSlot" and "maxSlot" for each - that way we can just check those
attributes rather than requiring a nearly identical switch statement
everywhere we need to validate compatibility.
You may notice many places where the flags are seemingly hard-coded to
QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI
This is currently the correct value for all PCI devices, and in the
future will be the default, with small bits of code added to change to
the flags for the few devices which are the exceptions to this rule.
Finally, there are a few places with "FIXME" comments. Note that these
aren't indicating places that are broken according to the currently
supported devices, they are places that will need fixing when support
for new PCI controller models is added.
To assure that there was no regression in the auto-allocation of PCI
addresses or auto-creation of integrated pci-root, ide, and usb
controllers, a new test case (pci-bridge-many-disks) has been added to
both the qemuxml2argv and qemuxml2xml tests. This new test defines a
domain with several dozen virtio disks but no pci-root or
pci-bridges. The .args file of the new test case was created using
libvirt sources from before this patch, and the test still passes
after this patch has been applied.
Commit id '4421e257' strdup'd devAlias, but didn't free
Running qemuhotplugtest under valgrind resulted in the following:
==7375== 9 bytes in 1 blocks are definitely lost in loss record 11 of 70
==7375== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==7375== by 0x37C1085D71: strdup (strdup.c:42)
==7375== by 0x4CBBD5F: virStrdup (virstring.c:554)
==7375== by 0x4CFF9CB: virDomainEventDeviceRemovedNew (domain_event.c:1174)
==7375== by 0x427791: qemuDomainRemoveChrDevice (qemu_hotplug.c:2508)
==7375== by 0x42C65D: qemuDomainDetachChrDevice (qemu_hotplug.c:3357)
==7375== by 0x41C94F: testQemuHotplug (qemuhotplugtest.c:115)
==7375== by 0x41D817: virtTestRun (testutils.c:168)
==7375== by 0x41C400: mymain (qemuhotplugtest.c:322)
==7375== by 0x41DF3A: virtTestMain (testutils.c:764)
==7375== by 0x37C1021A04: (below main) (libc-start.c:225)
Add a privileged field to storageDriverState
Use the privileged value in order to generate a connection which could
be passed to the various storage backend drivers.
In particular, the iSCSI driver will need a connect in order to perform
pool authentication using the 'chap' secrets and the RBD driver utilizes
the connection during pool refresh for pools using 'ceph' secrets.
For now that connection will be to be to qemu driver until a mechanism
is devised to get a connection to just the secret driver without qemu.
virDomainDiskDefForeachPath is not only used by the security
setting helpers, also used by cgroup setting helpers, so this
is to ignore the volume type disk with mode="direct" for cgroup
setting.
The difference with already supported pool types (dir, fs, block)
is: there are two modes for iscsi pool (or network pools in future),
one can specify it either to use the volume target path (the path
showed up on host) with mode='host', or to use the remote URI qemu
supports (e.g. file=iscsi://example.org:6000/iqn.1992-01.com.example/1)
with mode='direct'.
For 'host' mode, it copies the volume target path into disk->src. For
'direct' mode, the corresponding info in the *one* pool source host def
is copied to disk->hosts[0].
There are two ways to use a iSCSI LUN as disk source for qemu.
* The LUN's path as it shows up on host, e.g.
/dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1
* The libiscsi URI from the storage pool source element host attribute, e.g.
iscsi://demo.org:6000/iqn.1992-01.com.example/1
For a "volume" type disk, if the specified "pool" is of iscsi
type, we should support to use the LUN in either of above 2 ways.
That's why to introduce a new XML tag "mode" for the disk source
(libvirt should support iscsi pool with libiscsi, but it's another
new feature, which should be done later).
The "mode" can be either of "host" or "direct". Use "host" to indicate
use of the LUN with the path as it shows up on host. Use "direct" to
indicate to use it with the source pool host URI (future patches may support
to use network type libvirt storage too, e.g. Ceph)
These helpers use the remembered host capabilities to retrieve the cpu
map rather than query the host again. The intended usage for this
helpers is to fix automatic NUMA placement with strict memory alloc. The
code doing the prepare needs to pin the emulator process only to cpus
belonging to a subset of NUMA nodes of the host.
When using logical pools, we had to trust the target->path provided.
This parameter, however, can be completely ommited and we can use
'/dev/<source.name>' safely and populate it to target.path.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=952973
There are two levels on which a device may be hotplugged: config
and live. The config level requires just an insert or remove from
internal domain definition structure, which is exactly what this
patch does. There is currently no implementation for a chardev
update action, as there's not much to be updated. But more
importantly, the only thing that can be updated is path or socket
address by which chardevs are distinguished. So the update action
is currently not supported.
Now that we have callbacks, we should auto fill in omitted pieces of
information. It's important for chardev hotplug to fill in the correct
/{serial,parallel,console,channel}/target/@port if no value has been
provided by user.
https://bugzilla.redhat.com/show_bug.cgi?id=799354
Until now, the "host-model" cpu mode couldn't be influenced. This patch
allows to use the <feature> elements to either enable or disable
specific CPU flags. This can be used to force flags that can be emulated
even if the host CPU doesn't support them.
This new function updates or adds a feature to a existing cpu model
definition. This function will be helpful to allow tuning of
"host-model" features in later patches.
Merge virStoragePoolDefParseAuthChap and virStoragePoolDefParseAuthCephx
into a common virStoragePoolDefParseAuthSecret. Change the output to be
common for both by putting 'type' first followed by 'username'.
The existing 'chap' XML logic was never used - just defined. Rather than
try to insert a square peg into a round hole, blow it up and rewrite the
logic to follow the 'ceph' format.
Remove the former "chap.login" and "chap.passwd" fields and replace
with "chap.username" and "chap.secret" in _virStoragePoolAuthChap.
Adjust the virStoragePoolDefParseAuthChap() to process.
Change the rng file to describe the new layout
Update the formatstorage.html to describe the usage of the secret element
to mention that the secret type "iscsi" and "ceph" can be used
to storage pool too.
Update the formatsecret.html to include a reference to the storage pool
Update tests to handle the changes from 'login' and 'passwd' to 'username'
and '<secret>' format
For now, only these three helpers are needed:
virDomainChrFind - to find a duplicate chardev within VM def
virDomainChrInsert - wrapper for inserting a new chardev into VM def
virDomainChrRemove - wrapper for removing chardev from VM def
There is, however, one internal helper as well:
virDomainChrGetDomainPtrs which sets given pointers to one of
vmdef->{parallels,serials,consoles,channels} based on passed
chardev type.
When adding a new domain device, it is fairly easy to forget to add
corresponding piece into virDomainDeviceDefParse. However, if the
internal structure is changed to one bit switch() the compiler will warn
about not handled enum item.
Not all device types are currently parsed in virDomainDeviceDefParse,
Since all needed functions do exist, nothing holds us back to make the
implementation complete. Similarly, the virDomainDeviceDefFree needs to
be updated as well.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Actually, I'm turning this function into a macro as filename,
function name and line number needs to be passed. The new
function virAsprintfInternal is introduced with the extended set
of arguments.
<hyperv>
<spinlocks state='off'/>
</hyperv>
results in:
error: XML error: missing HyperV spinlock retry count
Don't require retries when state is off and use virXPathUInt
instead of virXPathString to simplify parsing.
https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19
While iterating with virDomainObjListForEach it is safe to remove
current element. But while iterating, 'doms' lock is already taken, so
can't use standard virDomainObjListRemove. So introduce
virDomainObjListRemoveLocked for this purpose.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Ensure that all APIs which list interface objects filter
them against the access control system.
This makes the APIs for listing names and counting devices
slightly less efficient, since we can't use the direct
netcf APIs for these tasks. Instead we have to ask netcf
for the full list of objects & iterate over the list
filtering them out.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that all APIs which list node device objects filter
them against the access control system.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make sure the mapping line contains the root user of container
is the first element of idmap array. So we can get the real
user id on host for the container easily.
This patch also check the map information, User must map
the root user of container to any user of host.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
This patch introduces new element <idmap> for
user namespace. for example
<idmap>
<uid start='0' target='1000' count='10'/>
<gid start='0' target='1000' count='10'/>
</idmap>
this new element is used for setting proc files
/proc/<pid>/{uid_map,gid_map}.
This patch also supports multiple uid/gid elements
setting in XML configuration.
We don't support the semi configuation, user has to
configure uid and gid both.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Implement check whether (maximum) vCPUs doesn't exceed machine
type's cpu-max settings.
On older versions of QEMU the check is disabled.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
There were two errors, one as a direct result of commit id '8807b285'
and the other from cut-n-paste
TEST: nodedevxml2xmltest
.............. 14 OK
==25735== 3 bytes in 1 blocks are definitely lost in loss record 1 of 24
==25735== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==25735== by 0x344D2AF275: xmlStrndup (in /usr/lib64/libxml2.so.2.9.1)
==25735== by 0x4D0C767: virNodeDeviceDefParseNode (node_device_conf.c:997)
==25735== by 0x4D0D3D2: virNodeDeviceDefParse (node_device_conf.c:1337)
==25735== by 0x401CA4: testCompareXMLToXMLHelper (nodedevxml2xmltest.c:28)
==25735== by 0x402B2F: virtTestRun (testutils.c:158)
==25735== by 0x401B27: mymain (nodedevxml2xmltest.c:81)
==25735== by 0x40316A: virtTestMain (testutils.c:722)
==25735== by 0x37C1021A04: (below main) (libc-start.c:225)
==25735==
==25735== 16 bytes in 1 blocks are definitely lost in loss record 10 of 24
==25735== at 0x4A08A6E: realloc (vg_replace_malloc.c:662)
==25735== by 0x4C7385E: virReallocN (viralloc.c:184)
==25735== by 0x4C73906: virExpandN (viralloc.c:214)
==25735== by 0x4C73B4A: virInsertElementsN (viralloc.c:324)
==25735== by 0x4D0C84C: virNodeDeviceDefParseNode (node_device_conf.c:1026)
==25735== by 0x4D0D3D2: virNodeDeviceDefParse (node_device_conf.c:1337)
==25735== by 0x401CA4: testCompareXMLToXMLHelper (nodedevxml2xmltest.c:28)
==25735== by 0x402B2F: virtTestRun (testutils.c:158)
==25735== by 0x401B27: mymain (nodedevxml2xmltest.c:81)
==25735== by 0x40316A: virtTestMain (testutils.c:722)
==25735== by 0x37C1021A04: (below main) (libc-start.c:225)
==25735==
PASS: nodedevxml2xmltest
The first error was resolved by adding a missing VIR_FREE(numberStr); in
the new function virNodeDevCapPciDevIommuGroupParseXML().
The second error was a bit more opaque as the error was a result of copying
the free methodolgy of the existing code in virNodeDevCapsDefFree(). The code
would free each of the entries in the array, but not the memory for the
array itself. Added the necessary VIR_FREE(data->pci_dev.iommuGroupDevices)
and while at it added the missing VIR_FREE(data->pci_dev.virtual_functions)
although there wasn't a test that tripped across it (thus it's been lurking
since commit id 'a010165d').
Commit '861d4056' introduced the following:
TEST: networkxml2xmltest
.................. 18 OK
==25504== 7 bytes in 1 blocks are definitely lost in loss record 5 of 23
==25504== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==25504== by 0x37C1085D71: strdup (strdup.c:42)
==25504== by 0x4CB835F: virStrdup (virstring.c:546)
==25504== by 0x4CC5179: virXPathString (virxml.c:90)
==25504== by 0x4CC75C2: virNetDevVlanParse (netdev_vlan_conf.c:78)
==25504== by 0x4CF928A: virNetworkPortGroupParseXML (network_conf.c:1555)
==25504== by 0x4CFE385: virNetworkDefParseXML (network_conf.c:2049)
==25504== by 0x4D0113B: virNetworkDefParseNode (network_conf.c:2273)
==25504== by 0x4D01254: virNetworkDefParse (network_conf.c:2234)
==25504== by 0x401E80: testCompareXMLToXMLHelper (networkxml2xmltest.c:32)
==25504== by 0x402D4F: virtTestRun (testutils.c:158)
==25504== by 0x401CE9: mymain (networkxml2xmltest.c:110)
==25504==
PASS: networkxml2xmltest
Also changed the label from error to cleanup and adjusted code since it's
all one exit path
Implicit controllers may be dependent on device definitions altered
in a post-parse callback. Specifically, if a console device is
defined without the target type, the type will be set in QEMU's
callback. In the case of s390, this is virtio, which requires
an implicit virtio-serial controller.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This includes adding it to the nodedev parser and formatter, docs, and
test.
An example of the new iommuGroup element that is a part of the output
from "virsh nodedev-dumpxml" (virNodeDeviceGetXMLDesc()):
<device>
<name>pci_0000_02_00_1</name>
<capability type='pci'>
...
<iommuGroup number='12'>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/>
</iommuGroup>
</capability>
</device>
This patch adds functionality to allow libvirt to configure the
'native-tagged' and 'native-untagged' modes on openvswitch networks.
Signed-off-by: Laine Stump <laine@redhat.com>
Add <features> and <compat> elements to volume target XML.
<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.
<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
Add new CPU features for HyperV:
vapic for virtual APIC support
spinlocks for setting spinlock support
<features>
<hyperv>
<vapic state='on'/>
<spinlocks state='on' retries='4096'/>
</hyperv>
</features>
https://bugzilla.redhat.com/show_bug.cgi?id=784836
Just to reduce the indentation levels. Remove the unneeded
NULL check for disk->file, as virBufferEscapeString doesn't
print anything with NULL arguments.
Since scsi generic device doesn't have DEVTYPE property set, the
only way to know if it's a scsi generic device or not is to read
the "SUBSYSTEM" property.
The XML of the scsi generic device will be like:
<device>
<name>scsi_generic_sg0</name>
<path>/sys/devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0/scsi_generic/sg0</path>
<parent>scsi_0_0_0_0</parent>
<capability type='scsi_generic'>
<char>/dev/sg0</char>
</capability>
</device>
The name format is constructed by libvirt, it's not that clear to
get what the device's sysfs path should be. This exposes the device's
sysfs path by a new tag <path>.
Since the sysfspath is filled during enumerating the devices by
either udev or HAL. It's an output-only tag.
https://bugzilla.redhat.com/show_bug.cgi?id=971485
As of d7f9d82753 we copy the listen
address from the qemu.conf config file in case none has been provided
via XML. But later, when migrating, we should not include such listen
address in the migratable XML as it is something autogenerated, not
requested by user. Moreover, the binding to the listen address will
likely fail, unless the address is '0.0.0.0' or its IPv6 equivalent.
This patch introduces a new boolean attribute to virDomainGraphicsListenDef
to distinguish autofilled listen addresses. However, we must keep the
attribute over libvirtd restarts, so it must be kept within status XML.
https://bugzilla.redhat.com/show_bug.cgi?id=964177
Though both libvirt and QEMU's document say RTC_CHANGE returns
the offset from the host UTC, qemu actually returns the offset
from the specified date instead when specific date is provided
(-rtc base=$date).
It's not safe for qemu to fix it in code, it worked like that
for 3 years, changing it now may break other QEMU use cases.
What qemu tries to do is to fix the document:
http://lists.gnu.org/archive/html/qemu-devel/2013-05/msg04782.html
And in libvirt side, instead of replying on the value from qemu,
this converts the offset returned from qemu to the offset from
host UTC, by:
/*
* a: the offset from qemu RTC_CHANGE event
* b: The specified date (-rtc base=$date)
* c: the host date when libvirt gets the RTC_CHANGE event
* offset: What libvirt will report
*/
offset = a + (b - c);
The specified date (-rtc base=$date) is recorded in clock's def as
an internal only member (may be useful to exposed outside?).
Internal only XML tag "basetime" is introduced to not lose the
guest's basetime after libvirt restarting/reloading:
<clock offset='variable' adjustment='304' basis='utc' basetime='1370423588'/>
With unknown good reasons, the attribute "bus" of scsi device
address is always set to 0, same for attribute "target". (See
virDomainDiskDefAssignAddress).
Though we might need to change the algorithm to honor "bus"
and "target" too, that's a different issue. The address generator
for scsi host device in this patch just follows the unknown
good reasons, only considering the "controller" and "unit".
It walks through all scsi controllers and their units, to see
if the address $controller:0:0:$unit can be used (if not used
by any disk or scsi host device yet), if found one, it sits on
it, otherwise, it creates a new controller (actually the controller
is implicitly created by someone else), and sits on
$new_controller:0:0:0 instead.
Commit '6afdfc8e' adjusted the exit and error paths to go through the error
and cleanup labels, but neglected to remove the return ret prior to cleanup.
Also noted the 'type' xml string fetch was never checked for NULL which
could lead to some interesting results.
And error out if the casted value is not same with the original
one, which prevents the bug on platform(s) where uid_t/gid_t
has different size with long.
Changes:
* Free all the strings at "cleanup", instead of freeing them
in the middle
* Remove xmlFree
* s/tmppath/target_path/, to make it more sensible
* Add new goto label "error"
gcc 4.1.2 (hello, RHEL 5!) fails to build on 32-bit platforms with:
conf/domain_conf.c: In function 'virDomainDefParseXML':
conf/domain_conf.c:10581: warning: integer constant is too large for 'long' type
Problem introduced in commit f8e3221f9.
* src/conf/domain_conf.c (virDomainDefParseXML): Mark large constants.
Signed-off-by: Eric Blake <eblake@redhat.com>
I noticed several unusual spacings in for loops, and decided to
fix them up. See the next commit for the syntax check that found
all of these.
* examples/domsuspend/suspend.c (main): Fix spacing.
* python/libvirt-override.c: Likewise.
* src/conf/interface_conf.c: Likewise.
* src/security/virt-aa-helper.c: Likewise.
* src/util/virconf.c: Likewise.
* src/util/virhook.c: Likewise.
* src/util/virlog.c: Likewise.
* src/util/virsocketaddr.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/viruuid.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* tools/virsh-domain-monitor.c (vshDomainStateToString): Drop
default case, to let compiler check us.
* tools/virsh-domain.c (vshDomainVcpuStateToString): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
With previous patch, we accept negative value as length of string to
duplicate. So there is no need to pass strlen(src) in case we want to do
duplicate the whole string.
Don't free the stream on error if we've successfully added it
to the hash table, since it will be freed by virChrdevHashEntryFree
callback.
Preserve the error message before calling virStreamFree, since it
resets the error.
Introduced by 4716138, crashing since 6921892.
Reported by Sergey Fionov on libvir-list.
In bf1fe848 I've introduced 'newName' variable to substitute the old
'const char *name' as previously we had an ugly code there:
name = strdup(name);
However, some parts of the function were not updated, so they were still
calling VIR_FREE(name) instead of VIR_FREE(newName).
This attribute is going to represent number of queues for
multique vhost network interface. This commit implements XML
extension part of the feature and add one test as well. For now,
we can only do xml2xml test as qemu command line generation code
is not adapted yet.
-vnc :5900,share=allow-exclusive
allows clients to ask for exclusive access which is
implemented by dropping other connections Connecting
multiple clients in parallel requires all clients asking
for a shared session (vncviewer: -shared switch)
-vnc :5900,share=force-shared
disables exclusive client access. Useful for shared
desktop sessions, where you don't want someone forgetting
specify -shared disconnect everybody else.
-vnc :5900,share=ignore
completely ignores the shared flag and allows everybody
connect unconditionally
virConnectListAllInterfaces should support to list all of
interfaces when the value of flags is 0. The behaviour is
consistent with other virConnectListAll* APIs
Introduce use of a virDomainDefPtr in the domain lookup
APIs to simplify introduction of ACL security checks.
The virDomainPtr cannot be safely used, since the app
may have supplied mis-matching name/uuid/id fields. eg
the name points to domain X, while the uuid points to
domain Y. Resolving the virDomainPtr to a virDomainDefPtr
ensures a consistent name/uuid/id set.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Changes:
* Remove useless comments
* Remove useless blank lines
* If the struct member is a enum type, comment it like
/* enum fooBar */
* Break the long lines
* Prefer the common function style for the inline function
Changes:
* Remove the useless space in "for" statement (e.g.
for (i = 0 ; i < something ; i++)
* Change the function's style to:
void
foo(bar)
{
printf("foo is not bar\n");
}
* Don't lose "{}" for "if...else" branches if one of the branch
has more than one line block. Example of the old ones:
if (a) {
printf("a is not funny");
} else
printf("a is funny");
* Remove the 1 space before "goto" label.
* Remove the useless blank line(s)
* Add blank line if it can make the code more clear to eyes.
QEMU might support more values for "-drive discard", so using Bi-state
values (on/off) for it doesn't make sense.
"on" maps to "unmap", "off" maps to "ignore":
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
The following XML configuration can be used to request all domain's
memory pages to be kept locked in host's memory (i.e., domain's memory
pages will not be swapped out):
<memoryBacking>
<locked/>
</memoryBacking>
The reason for it's not exposed for such long time is that the
enums for VirtioEventIdx and CopyOnReadType have same enum values
and Correspondingstrings. This fixes the bug and adds test.
If the <sysinfo> system table 'uuid' field is improperly formatted,
then qemu will fail to start the guest with the error:
virsh start dom
error: Failed to start domain dom
error: internal error process exited while connecting to monitor: Invalid SMBIOS UUID string
This was because the parsing rules were lax with respect to allowing extraneous
spaces and dashes in the provided UUID. As long as there were 32 hexavalues
that matched the UUID for the domain the string was accepted. However startup
failed because the string format wasn't correct. This patch will adjust the
string format so that when it's presented to the driver it's in the expected
format.
Added a test for uuid comparison within sysinfo.
QEMU introduced "discard" option for drive since commit a9384aff53,
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
This patch exposes the support in libvirt.
QEMU supported "discard" for "-drive" since v1.5.0-rc0:
% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1
So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
Adding support for new attribute 'websocket' in the '<graphics>'
element, the attribute value is the port to listen on with '-1'
meaning auto-allocation, '0' meaning no websockets.
QEMU introduced command line "-mem-merge=on|off" (defaults to on) to
enable/disable the memory merge (KSM) at guest startup. This exposes
it by new XML:
<memoryBacking>
<nosharepages/>
</memoryBacking>
The XML tag is same with what we used internally for old RHEL.
network: static route support for <network>
This patch adds the <route> subelement of <network> to define a static
route. the address and prefix (or netmask) attribute identify the
destination network, and the gateway attribute specifies the next hop
address (which must be directly reachable from the containing
<network>) which is to receive the packets destined for
"address/(prefix|netmask)".
These attributes are translated into an "ip route add" command that is
executed when the network is started. The command used is of the
following form:
ip route add <address>/<prefix> via <gateway> \
dev <virbr-bridge> proto static metric <metric>
Tests are done to validate that the input data are correct. For
example, for a static route ip definition, the address must be a
network address and not a host address. Additional checks are added
to ensure that the specified gateway is directly reachable via this
network (i.e. that the gateway IP address is in the same subnet as one
of the IP's defined for the network).
prefix='0' is supported for both family='ipv4' address='0.0.0.0'
netmask='0.0.0.0' or prefix='0', and for family='ipv6' address='::',
prefix=0', although care should be taken to not override a desired
system default route.
Anytime an attempt is made to define a static route which *exactly*
duplicates an existing static route (for example, address=::,
prefix=0, metric=1), the following error message will be sent to
syslog:
RTNETLINK answers: File exists
This can be overridden by decreasing the metric value for the route
that should be preferred, or increasing the metric for the route that
shouldn't be preferred (and is thus in place only in anticipation that
the preferred route may be removed in the future). Caution should be
used when manipulating route metrics, especially for a default route.
Note: The use of the command-line interface should be replaced by
direct use of libnl so that error conditions can be handled better. But,
that is being left as an exercise for another day.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
The <filesystem> element can now accept a <driver type='nbd'/>
as an alternative to 'loop'. The benefit of NBD is support
for non-raw disk image formats.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the <driver> element in filesystem devices to
allow a storage format to be set. The new attribute
uses 'format' to reflect the storage format. This is
different from the <driver> element in disk devices
which use 'type' to reflect the storage format. This
is because the 'type' attribute on filesystem devices
is already used for the driver backend, for which the
disk devices use the 'name' attribute. Arggggh.
Anyway for disks we have
<driver name="qemu" type="raw"/>
And for filesystems this change means we now have
<driver type="loop" format="raw"/>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
An example of the scsi hostdev XML:
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='0' unit='0'/>
</source>
<address type='drive' controller='0' bus='0' target='4' unit='8'/>
</hostdev>
Controller is implicitly added for scsi hostdev, though the scsi
controller's model defaults to "lsilogic", which might be not what
the user wants (same problem exists for virtio-scsi disk). It's
the existing problem, will be addressed later.
The device address must be specified manually. Later patch will let
libvirt generate it automatically.
This only introduces the generic XMLs for scsi hostdev, later patches
will add other elements, e.g. <readonly>, <shareable>.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
Print an error instead of crashing when a TPM device without
a backend is specified.
Add a test for tpm device with no backend, which should fail
with a parse error.
https://bugzilla.redhat.com/show_bug.cgi?id=961252
Several APIs allow for custom XML to be passed in. This is
checked for ABI stability, which will ensure the UUID is
not being changed. There isn't validation that the name
did not change though. This could allow renaming of guests
via the backdoor, which in turn could allow for bypassing
access control restrictions based on names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
It's not desired to force users imagine path for a socket they
are not even supposed to connect to. On the other hand, we
already have a release where the qemu agent socket path is
exposed to XML, so we cannot silently drop it from there.
The new path is generated in form:
$LOCALSTATEDIR/lib/libvirt/qemu/channel/target/$domain.$name
for qemu system mode, and
$XDG_CONFIG_HOME/qemu/lib/channel/target/$domain.$name
for qemu session mode.
This isn't strictly speaking a bugfix, but I realized I'd gotten a bit
too verbose when I chose the names for
VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_*. This shortens them all a bit.
I remembered to document this bit, but somehow forgot to implement it.
This adds <driver name='kvm|vfio'/> as a subelement to the <forward>
element of a network (this puts it parallel to the match between
mode='hostdev' attribute in a network and type='hostdev' in an
<interface>).
Since it's already documented, only the parser, formatter, backend
driver recognition (it just translates/moves the flag into the
<interface> at the appropriate time), and a test case were needed.
(I used a separate enum for the values both because the original is
defined in domain_conf.h, which is unavailable from network_conf.h,
and because in the future it's possible that we may want to support
other non-hostdev oriented driver names in the network parser; this
makes sure that one can be expanded without the other).
A domain's <interface> or <hostdev>, as well as a <network>'s
<forward>, can now have an optional <driver name='kvm|vfio'/>
element. As of this patch, there is no functionality behind this new
knob - this patch adds support to the domain and network
formatter/parser, and to the RNG and documentation.
When the backend is added, legacy KVM PCI device assignment will
continue to be used when no driver name is specified (or if <driver
name='kvm'/> is specified), but if driver name is 'vfio', the new UEFI
Secure Boot compatible VFIO device assignment will be used.
Note that the parser doesn't automatically insert the current default
value of this setting. This is done on purpose because the two
possibilities are functionally equivalent from the guest's point of
view, and we want to be able to automatically start using vfio as the
default (even for existing domains) at some time in the future. This
is similar to what was done with the "vhost" driver option in
<interface>.
There will soon be other items related to pci hostdevs that need to be
in the same part of the hostdevsubsys union as the pci address (which
is currently a single member called "pci". This patch replaces the
single member named pci with a struct named pci that contains a single
member named "addr".
When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose). Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.
<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.
Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.
Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.
Assume format type is 'auto' when none is specified on
qemu command line.
For pSeries guest in QEMU, NVRAM is one kind of spapr-vio device.
Users are allowed to specify spapr-vio devices'address.
But NVRAM is not supported in libvirt. So this patch is to
add NVRAM device to allow users to specify its address.
In QEMU, NVRAM device's address is specified by
"-global spapr-nvram.reg=xxxxx".
In libvirt, XML file is defined as the following:
<nvram>
<address type='spapr-vio' reg='0x3000'/>
</nvram>
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Instead of making a choice between the underscore and camelCase, this
simply changes "num_queues" into "queues", which is also consistent
with Michal's multiple queue support for interface.
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Switch the function from a bunch of ifs to a switch statement with
correct type and reflow some code.
Also fix comment in enum describing possible graphics types
1. Handle invalid ULong prefix specified.
When parsing for @prefix as a ULong, a -2 can be returned
if the specification is not a valid ULong.
2. Error out if address= is not specified.
3. Merge netmask process/tests under family tests.
4. Max sure that prefix does not exceed maximum.
.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Create the utility function virSocketAddrGetIpPrefix() to
determine the prefix for this network. The code in this
function was adapted from virNetworkIpDefPrefix().
Update virNetworkIpDefPrefix() in src/conf/network_conf.c
to use the new utility function.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
http://www.uhv.edu/ac/newsletters/writing/grammartip2009.07.01.htm
(and several other sites) give hints that 'onto' is best used if
you can also add 'up' just before it and still make sense. In many
cases in the code base, we really want the two-word form, or even
a simplification to just 'on' or 'to'.
* docs/hacking.html.in: Use correct 'on to'.
* python/libvirt-override.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* src/util/virpci.c: Likewise.
* daemon/THREADS.txt: Use simpler 'on'.
* docs/formatdomain.html.in: Better usage.
* docs/internals/rpc.html.in: Likewise.
* src/conf/domain_event.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* tests/qemumonitortestutils.c: Likewise.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=922186
Commit d04916fa introduced a regression in audit quality - even
though the code was computing the proper escaped name for a
path, it wasn't feeding that escaped name on to the audit message.
As a result, /var/log/audit/audit.log would mention a pair of
fields class=path path=/dev/hpet instead of the intended
class=path path="/dev/hpet", which in turn caused ausearch to
format the audit log with path=(null).
* src/conf/domain_audit.c (virDomainAuditCgroupPath): Use
constructed encoding.
Signed-off-by: Eric Blake <eblake@redhat.com>
The error message reported when attempting to change/get persistent
configuration of a transient domain suggests that changes are being
made. Reword it to suit getter APIs too.
Before:
$ virsh vcpucount transient-domain --config
error: Requested operation is not valid: cannot change persistent config of a transient domain
After:
$ virsh vcpucount transient-domain --config
error: Requested operation is not valid: transient domains do not have any persistent config
Until now tranisent networks weren't really useful as libvirtd wasn't
able to remember them across restarts. This patch adds support for
loading status files of transient networks (that already were generated)
so that the status isn't lost.
This patch chops up virNetworkObjUpdateParseFile and turns it into
virNetworkLoadState and a few friends that will help us to load status
XMLs and refactors the functions that are loading the configs to use
them.
Detected by a simple Shell script:
for i in $(git ls-files -- '*.[ch]'); do
awk 'BEGIN {
fail=0
}
/# *include.*\.h/{
match($0, /["<][^">]*[">]/)
arr[substr($0, RSTART+1, RLENGTH-2)]++
}
END {
for (key in arr) {
if (arr[key] > 1) {
fail=1
printf("%d %s\n", arr[key], key)
}
}
if (fail == 1)
exit 1
}' $i
if test $? != 0; then
echo "Duplicate header(s) in $i"
fi
done;
A later patch will add the syntax-check to avoid duplicate
headers.
Allow VMs to be placed into resource groups using the
following syntax
<resource>
<partition>/virtualmachines/production</partition>
</resource>
A resource cgroup will be backed by some hypervisor specific
functionality, such as cgroups with KVM/LXC.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a VM with a TPM passthrough device is started, the audit daemon
logs the following type of message:
type=VIRT_RESOURCE msg=audit(1365170222.460:3378): pid=16382 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:virtd_t:s0-s0:c0.c1023 msg='virt=kvm resrc=dev reason=start vm="TPM-PT" uuid=a4d7cd22-da89-3094-6212-079a48a309a1 device="/dev/tpm0" exe="/usr/sbin/libvirtd" hostname=? addr=? terminal=? res=success'
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Parse the domain XML with TPM passthrough support.
The TPM passthrough XML may look like this:
<tpm model='tpm-tis'>
<backend type='passthrough'>
<device path='/dev/tpm0'/>
</backend>
</tpm>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
This patch adds the ability to configure non-contiguous boot orders on boot
devices. This allows unplugging devices that have boot order specified without
breaking migration.
The new code now uses a slightly less memory efficient approach to store the
boot order fields in a hashtable instead of a bitmap.
https://bugzilla.redhat.com/show_bug.cgi?id=920441
Currently, we are discarding listen attribute from qemu cookie even though
we strive to gather it. This result in not so cool bug: if user have
different networks, one for management/migration, and one for VNC/SPICE we
pass incorrect host to the qemu in client_migrate_info. What we actually
pass is remote hostname, while we should be passing remote listen address.
It doesn't matter as long as these two are the same, but they don't need
necessary to be like that.
==5306== 8 bytes in 1 blocks are definitely lost in loss record 24 of 277
==5306== at 0x4C28B2F: calloc (vg_replace_malloc.c:593)
==5306== by 0x5293CAF: virAllocN (viralloc.c:152)
==5306== by 0x52DFEAE: virXPathNodeSet (virxml.c:611)
==5306== by 0x5313DD9: virNetworkDefParseXML (network_conf.c:1408)
==5306== by 0x53170F6: virNetworkObjUpdateParseFile (network_conf.c:2031)
==5306== by 0x131DA63C: networkStartup (bridge_driver.c:279)
==5306== by 0x53481DF: virStateInitialize (libvirt.c:822)
==5306== by 0x40DF44: daemonRunStateInit (libvirtd.c:877)
==5306== by 0x52D2FF5: virThreadHelper (virthreadpthread.c:161)
==5306== by 0x5D00C52: start_thread (in /usr/lib64/libpthread-2.17.so)
==5306== by 0x6410ECC: clone (in /usr/lib64/libc-2.17.so)
This patch fixes crash of the daemon that happens due to the following race
condition:
Let's have two threads in the libvirtd daemon's qemu driver:
A - thread executing undefine on the same domain
B - thread executing a API call to get information about a domain
Assume following serialization of operations done by the threads:
1) A has the lock on the domain object and is executing some code prior to
virDomainObjListRemove()
2) B takes the lock on the domain object list, looks up the domain object
pointer and blocks in the attempt to lock the domain object as A is holding the
lock
3) A reaches virDomainObjListRemove() and unlocks the lock on the domain object
4) A blocks on the attempt to get the domain list lock
5) B is able to lock the domain object now and unlocks the domain list
6) A is now able to lock the domain list, and sheds the last reference on the
domain object, this triggers the freeing function.
6) B starts executing the code on the pointer that is being freed
7) The libvirtd daemon crashes while attempting to access invalid pointer in
thread B.
This patch fixes the race by acquiring a reference on the domain object before
unlocking it in virDomainObjListRemove() and re-locks the object prior to
removing and freeing it. This ensures that no thread holds a lock on the domain
object at the time it is removed from the list, and that doing a list lookup
will never find a domain that is about to vanish.
This is a minimal fix of the problem, but a better solution will be to switch to
full reference counting for domain objects.
The helper function to look up disk controller model may be used by scsi
hostdev. But it should be changed to use device info.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
This updates the definitions and supporting structures in the XML
schema and domain configuration files.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
To support "shareable" for volume type disk, we have to translate
the source before trying to add the shared disk entry. To achieve
the goal, this moves the helper qemuTranslateDiskSourcePool into
src/qemu/qemu_conf.c, and introduce an internal only member (voltype)
for struct _virDomainDiskSourcePoolDef, to record the underlying
volume type for use when building the drive string.
Later patch will support "shareable" volume type disk.
With this patch, one can specify the disk source using libvirt
storage like:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source pool='default' volume='fc18.img'/>
<target dev='vdb' bus='virtio'/>
</disk>
"seclabels" and "startupPolicy" are not supported for this new
disk type ("volume"). They will be supported in later patches.
docs/formatdomain.html.in:
* Add documents for new XMLs
docs/schemas/domaincommon.rng:
* Add rng for new XMLs;
src/conf/domain_conf.h:
* New struct for 'volume' type disk source (virDomainDiskSourcePoolDef)
* Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType
src/conf/domain_conf.c:
* New helper virDomainDiskSourcePoolDefParse to parse the 'volume'
type disk source.
* New helper virDomainDiskSourcePoolDefFree to free the source def
if 'volume' type disk.
tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
tests/qemuxml2xmltest.c:
* New test
This introduces 4 new attributes for storage pool source adapter.
E.g.
<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.
* docs/formatstorage.html.in:
- Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
- Add RNG schema
* src/conf/storage_conf.c:
- Parse and format the new XMLs
* src/conf/storage_conf.h:
- New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
- New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
- Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
- Replace "adapter" with "adapter.data.name", which is member of the union
of the new struct virStoragePoolSourceAdapter now. Later patch will
add the checking, as "adapter.data.name" is only valid for "scsi_host"
adapter.
* src/storage/storage_backend_scsi.c:
- Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
- New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
- Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
- New test
* tests/storagepoolxml2xmltest.c:
- Include the test
There are a number of places which generate cast alignment
warnings, which are difficult or impossible to address. Use
pragmas to disable the warnings in these few places
conf/nwfilter_conf.c: In function 'virNWFilterRuleDetailsParse':
conf/nwfilter_conf.c:1806:16: warning: cast increases required alignment of target type [-Wcast-align]
item = (nwItemDesc *)((char *)nwf + att[idx].dataIdx);
conf/nwfilter_conf.c: In function 'virNWFilterRuleDefDetailsFormat':
conf/nwfilter_conf.c:3238:16: warning: cast increases required alignment of target type [-Wcast-align]
item = (nwItemDesc *)((char *)def + att[i].dataIdx);
storage/storage_backend_mpath.c: In function 'virStorageBackendCreateVols':
storage/storage_backend_mpath.c:247:17: warning: cast increases required alignment of target type [-Wcast-align]
names = (struct dm_names *)(((char *)names) + next);
nwfilter/nwfilter_dhcpsnoop.c: In function 'virNWFilterSnoopDHCPDecode':
nwfilter/nwfilter_dhcpsnoop.c:994:15: warning: cast increases required alignment of target type [-Wcast-align]
pip = (struct iphdr *) pep->eh_data;
nwfilter/nwfilter_dhcpsnoop.c:1004:11: warning: cast increases required alignment of target type [-Wcast-align]
pup = (struct udphdr *) ((char *) pip + (pip->ihl << 2));
nwfilter/nwfilter_learnipaddr.c: In function 'procDHCPOpts':
nwfilter/nwfilter_learnipaddr.c:327:33: warning: cast increases required alignment of target type [-Wcast-align]
uint32_t *tmp = (uint32_t *)&dhcpopt->value;
nwfilter/nwfilter_learnipaddr.c: In function 'learnIPAddressThread':
nwfilter/nwfilter_learnipaddr.c:501:43: warning: cast increases required alignment of target type [-Wcast-align]
struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:538:43: warning: cast increases required alignment of target type [-Wcast-align]
struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:544:48: warning: cast increases required alignment of target type [-Wcast-align]
struct udphdr *udphdr= (struct udphdr *)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.
A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.
Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
Use the qemu specific callback to fill this data in the qemu driver as
it's the only place where it was used and fix tests as the qemu test
capability object didn't configure the defaults for the tests.
This patch removes the emulatorRequired field and associated
infrastructure from the virCaps object. Instead the driver specific
callbacks are used as this field isn't enforced by all drivers.
This patch implements the appropriate callbacks in the qemu and lxc
driver and moves to check to that location.
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
This gets rid of the parameter in favor of using the new callback
infrastructure to do the same stuff.
This patch implements the domain adjustment callback in the openVZ
driver and moves the check from the parser to a new validation method in
the callback infrastructure.
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.
With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.
Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
- called for a single device parsed and for every single device in a
domain config. A virDomainDeviceDefPtr is passed along with the
domain definition and virCaps.
* virDomainDefPostParseCallback, (domainPostParseCallback)
- A callback that is meant to process the domain config after it's
parsed. A virDomainDefPtr is passed along with virCaps.
Both types of callbacks support arbitrary opaque data passed for the
callback functions.
Errors may be reported in those callbacks resulting in a XML parsing
failure.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
Format the address using the helper instead of having similar code in
multiple places.
This patch also fixes leak of the MAC address string in
ebtablesRemoveForwardAllowIn() and ebtablesAddForwardAllowIn() in
src/util/virebtables.c
The virDomainDefGetSecurityLabelDef was modifying the domain XML.
It tried to find a seclabel corresponding to given sec driver. If the
label wasn't found, the function created one which is wrong. In fact
it's security manager which should modify this part of domain XML.
When libvirtd loads active network configs from network state directory,
it should release the class_id memory block which was allocated
at the time of loading xml from network config directory.
virBitmapParse will create a new memory block of bitmap class_id which
causes a memory leak.
This happens when at least one virtual network is active before.
==12234== 8,216 (24 direct, 8,192 indirect) bytes in 1 blocks are definitely \
lost in loss record 702 of 709
==12234== at 0x4A06B2F: calloc (vg_replace_malloc.c:593)
==12234== by 0x37AB04D77D: virAlloc (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB04EF89: virBitmapNew (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB0BFB37: virNetworkAssignDef (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB0BFD31: ??? (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB0BFE92: virNetworkLoadAllConfigs (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x10650E5A: ??? (in /usr/lib64/libvirt/connection-driver/libvirt_driver_network.so)
==12234== by 0x37AB0EB72F: virStateInitialize (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x40DE04: ??? (in /usr/sbin/libvirtd)
==12234== by 0x37AB0832E8: ??? (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x3796807D14: start_thread (in /usr/lib64/libpthread-2.16.so)
==12234== by 0x37960F246C: clone (in /usr/lib64/libc-2.16.so)
#virsh detach-device $guest usb.xml
error: Failed to detach device from usb2.xml
error: operation failed: host usb device vendor=0x0951 \
product=0x1625 not found
This regresstion is due to a typo in matching function. The first
argument is always the usb device that we are checking for. If the
usb xml file provided by user contains bus and device info, we try
to search it by them, otherwise, we use vendor and product info.
The bug occurred only when detaching a usb device with no bus and
device info provided in the usb xml file.
This enrichs HBA's xml by dumping the number of max vports and
vports in use. Format is like:
<capability type='vport_ops'>
<max_vports>164</max_vports>
<vports>5</vports>
</capability>
* docs/formatnode.html.in: (Document the new XML)
* docs/schemas/nodedev.rng: (Add the schema)
* src/conf/node_device_conf.h: (New member for data.scsi_host)
* src/node_device/node_device_linux_sysfs.c: (Collect the value of
max_vports and vports)
VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST to filter the FC HBA,
and VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS to filter the FC HBA
which supports vport.
Guess it was created for the fc_host and vports_ops capabilities
purpose, but there is enum virNodeDevScsiHostCapFlags for them,
and enum virNodeDevHBACapType is unused, and actually both
VIR_ENUM_DECL and VIR_ENUM_IMPL use the wrong enum name
"virNodeDevHBACap".
The virDomainGetRootFilesystem was only returning filesystems
with type=mount. This is bogus - any type of filesystem is
valid as the root, if dst=/.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Noticed that parsing bond interface XML containing the miimon element
fails
<interface type="bond" name="bond0">
...
<bond mode="active-backup">
<miimon freq="100" carrier="netif"/>
...
</bond>
</interface>
This configuration does not contain the optional updelay and downdelay
attributes, but parsing will fail due to returning the result of
virXPathULong (a -1 when the attribute doesn't exist) from
virInterfaceDefParseBond after examining the updelay attribute.
While fixing this bug, cleanup the function to use virXPathInt instead
of virXPathULong, and store the result directly instead of using a tmp
variable. Using virXPathInt actually fixes a potential silent
truncation bug noted by Eric Blake.
Also, there is no cleanup in the error label. Remove the label,
returning failure where failure occurs and success if the end of the
function is reached.
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only sheepdog actually required it in the code, and we can use 7000 as the
default---the same value that QEMU uses for the simple "sheepdog:VOLUME"
syntax. With this change, the schema can be fixed to allow no port.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This plumbs in the XML description of iSCSI shares. The next patches
will add support for the libiscsi userspace initiator.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intend to reduce the redundant code,use virNumaSetupMemoryPolicy
to replace virLXCControllerSetupNUMAPolicy and
qemuProcessInitNumaMemoryPolicy.
This patch also moves the numa related codes to the
file virnuma.c and virnuma.h
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
This patch adds auditing of resources used by Virtio RNG devices. Only
resources on the local filesystems are audited.
The audit logs look like:
For the 'random' backend:
type=VIRT_RESOURCE msg=audit(1363099126.643:31): pid=995252 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=rng reason=start vm="qcow-test" uuid=118733ed-b658-3e22-a2cb-4fe5cb3ddf79 old-rng="?" new-rng="/dev/random": exe="/home/pipo/libvirt/daemon/.libs/libvirtd" hostname=? addr=? terminal=pts/0 res=success'
For local character device source:
type=VIRT_RESOURCE msg=audit(1363100164.240:96): pid=995252 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=rng reason=start vm="qcow-test" uuid=118733ed-b658-3e22-a2cb-4fe5cb3ddf79 old-rng="?" new-rng="/tmp/unix.sock": exe="/home/pipo/libvirt/daemon/.libs/libvirtd" hostname=? addr=? terminal=pts/0 res=success'
Qemu's implementation of virtio RNG supports rate limiting of the
entropy used. This patch exposes the option to tune this functionality.
This patch is based on qemu commit 904d6f588063fb5ad2b61998acdf1e73fb4
The rate limiting is exported in the XML as:
<devices>
...
<rng model='virtio'>
<rate bytes='123' period='1234'/>
<backend model='random'/>
</rng>
...
Add necessary handling code for the new s390 CCW address type to
virDomainDeviceInfo. Further, introduce memory management, XML
parsing, output formatting and range validation for the new
virDomainDeviceCCWAddress type.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
'virsh capabilities' will now include a new <memory> element
per <cell> of the topology, as in:
<topology>
<cells num='2'>
<cell id='0'>
<memory unit='KiB'>12572412</memory>
<cpus num='12'>
...
</cell>
Signed-off-by: Eric Blake <eblake@redhat.com>
Code that validates the whitelist for the RNG device filename
didn't account for fact that filename may be NULL. This led
to a NULL reference crash. This wasn't caught since the test
suite was not covering this XML syntax
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Resolves the following valgrind error from qemuxml2argvtest:
==20393== 5 bytes in 1 blocks are definitely lost in loss record 2 of 60
==20393== at 0x4A0883C: malloc (vg_replace_malloc.c:270)
==20393== by 0x38D690A167: __vasprintf_chk (in /usr/lib64/libc-2.16.so)
==20393== by 0x4CB0D97: virVasprintf (stdio2.h:210)
==20393== by 0x4CB0E53: virAsprintf (virutil.c:2017)
==20393== by 0x428DC5: qemuAssignDeviceAliases (qemu_command.c:791)
==20393== by 0x41DF93: testCompareXMLToArgvHelper (qemuxml2argvtest.c:151)
==20393== by 0x41F53F: virtTestRun (testutils.c:157)
==20393== by 0x41DA9B: mymain (qemuxml2argvtest.c:885)
==20393== by 0x41FB7A: virtTestMain (testutils.c:719)
==20393== by 0x38D6821A04: (below main) (in /usr/lib64/libc-2.16.so)
==20393==
From qemu_command.c/line 791:
if (def->rng) {
if (virAsprintf(&def->rng->info.alias, "rng%d", 0) < 0)
goto no_memory;
}
This patch adds proper error reporting if parsing of cputune parameters
fails due to incorrect values provided by the user. Previously no errors
were reported in such a case and the failure was silently ignored.
Make the iterator function usable in the next patches. Also refactor
some parts to avoid strcmp if not necessary.
This commit tweaks and shadows the change that was done in commit
babe7dada0 and was needed after the
support for multiple console devices was added. Historically the first
<console> element is alias for the <serial> device.
There is some controversy[1] on the qemu list on whether qemu should
have ever allowed arbitrary file name passthrough, or whether it
should be restricted to JUST /dev/random and /dev/hwrng. It is
always easier to add support for additional filenames than it is
to remove support for something once released, so this patch
restricts libvirt 1.0.3 (where the virtio-random backend was first
supported) to just the two uncontroversial names, letting us defer
to a later date any decision on whether supporting arbitrary files
makes sense. Additionally, since qemu 1.4 does NOT support
/dev/fdset/nnn fd passthrough for the backend, limiting to just
two known names means that we don't get tempted to try fd
passthrough where it won't work.
[1]https://lists.gnu.org/archive/html/qemu-devel/2013-03/threads.html#00023
* src/conf/domain_conf.c (virDomainRNGDefParseXML): Only allow
/dev/random and /dev/hwrng.
* docs/schemas/domaincommon.rng: Flag invalid files.
* docs/formatdomain.html.in (elementsRng): Document this.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.args:
Update test to match.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.xml:
Likewise.
This reverts commit 383ebc4694.
We decided the xml for this feature needed more thought to make sure
we are doing it the best way, in particular wrt option values that
have multiple items.
This reverts commit 0bbbd42c30.
The design for this feature is not complete, and may change the
name of the 'schid' attribute. Revert requested by Viktor Mihajlovski.
uid_t and gid_t are opaque types, ranging from s32 to u32 to u64.
Explicitly cast the magic -1 to the appropriate type.
Signed-off-by: Philipp Hahn <hahn@univention.de>
This patch adds basic configuration support for the RNG device
supporting the virtio model with the "random" and "egd" backend types as
described in the schema in the previous patch.
This patch adds a fake switch statement to force the compiler to warn
after a new device type was added. This should remind the contributor to
add the new device also to this iterator function.
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address. Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used. According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.
Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.
Documentation and schemas have been updated.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
This patch adds support for a new <option>-Tag in the <dhcp> block of
network configs, based on a subset of the fifth proposal by Laine
Stump in the mailing list discussion at
https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html.
Any such defined option will result in a dhcp-option=<number>,"<value>"
statement in the generated dnsmasq configuration file.
Currently, DHCP options can be specified by number only and there is
no whitelisting or blacklisting of option numbers, which should
probably be added.
Signed-off-by: Pieter Hollants <pieter@hollants.com>
Signed-off-by: Laine Stump <laine@laine.org>
For both AttachDevice and UpdateDevice APIs, if the disk device
is 'cdrom' or 'floppy', the operations could be ejecting, updating,
and inserting. For either ejecting or updating, the shared disk
entry of the original disk src has to be removed, because it's
not useful anymore.
And since the original disk def will be changed, new disk def passed
as argument will be free'ed in qemuDomainChangeEjectableMedia, so
we need to copy the orignal disk def before
qemuDomainChangeEjectableMedia, to use it for qemuRemoveSharedDisk.
We pass over the address/port start/end values many times so we put
them in structs.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
Let users set the port range to be used for forward mode NAT:
...
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
...
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
Support setting which public ip to use for NAT via attribute
address in subelement <nat> in <forward>:
...
<forward mode='nat'>
<address start='1.2.3.4' end='1.2.3.10'/>
</forward>
...
This will construct an iptables line using:
'-j SNAT --to-source <start>-<end>'
instead of:
'-j MASQUERADE'
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
When removing a VM from the virDomainObjListPtr, we must not
be holding the VM lock while acquiring the list lock. Re-order
code to ensure that we can release the VM lock early.
Add necessary handling code for the new s390 CCW address type to
virDomainDeviceInfo. Further, introduce memory management, XML
parsing, output formatting and range validation for the new
virDomainDeviceCCWAddress type.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Switch virDomainObjList to inherit from virObjectLockable and
make all the APIs acquire/release the mutex when running. This
makes virDomainObjList completely self-locking and no longer
reliant on the hypervisor driver locks
The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.
This pair, used in virDomainCreateXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainRestoreFlags:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, true)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainDefineXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
0, NULL)))
goto cleanup;
As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.
As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach
When a disk-only snapshot is requested the domain is treated as if it
was offline. This forbids to mix memory checkpoints with the DISK_ONLY
flag.
This patch improves the error message and mentions the restriction in
the virsh man page.
Commit 60b176c3d0 introduced a bug that
when editing an XML with cputune similar to this:
...
<vcpu placement='static' current='1'>2</vcpu>
<cputune>
<vcpupin vcpu="1" cpuset="0"/>
</cputune>
...
results in formatted XML that looks like this:
...
<vcpu placement='static' current='1'>2</vcpu>
<cputune>
</cputune>
...
That is caused by a condition depending on def->cputune.vcpupin being
set rather than checking def->cputune.nvcpupin. Notice that nvcpupin
can be 0 and vcpupin can still be allocated since it's a pointer to an
array, so no harm done there.
I also changed it on other places in the code where it depended on the
wrong variable.
