Otherwise qemu is unable to write to it, with the error:
libvir: QEMU error : internal error unable to execute QEMU command 'memsave': Could not open '/var/cache/libvirt/qemu/qemu.mem.RRNvLv'
The v2 migration protocol had a limit on cookie length that was
too small to be useful for QEMU. Avoid generating cookies with
v2 protocol, so that old libvirtd can still reliably migrate a
guest to new libvirtd uses v2 protocol.
* src/qemu/qemu_driver.c: Avoid migration cookies with v2
migration
Improve invalid argument checks in the size query case. The drivers already
relied on this unchecked behavior.
Relax the implementation of virDomainGet(Memory|Blkio)MemoryParameters
in the drivers and allow to pass more memory than necessary for all
parameters.
params and nparams are essential and cannot be NULL. Check this in
libvirt.c and remove redundant checks from the drivers (e.g. xend).
Instead of enforcing that nparams must point to exact same value as
returned by virDomainGetSchedulerType relax this to a lower bound
check. This is what some drivers (e.g. xen hypervisor and esx)
already did. Other drivers (e.g. xend) didn't check nparams at all
and assumed that there is enough space in params.
Unify the behavior in all drivers to a lower bound check and update
nparams to the number of valid values in params on success.
Implement the v3 migration protocol, which has two extra
steps, 'begin' on the source host and 'confirm' on the
source host. All other methods also gain both input and
output cookies to allow bi-directional data passing at
all stages.
The QEMU peer2peer migration method gains another impl
to provide the v3 migration. This finally allows migration
cookies to work with tunnelled migration, which is required
for Spice seamless migration & the lock manager transfer
* src/qemu/qemu_driver.c: Wire up migrate v3 APIs
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add
begin & confirm methods, and peer2peer impl of v3
The migration protocol has support for a 'cookie' parameter which
is an opaque array of bytes as far as libvirt is concerned. Drivers
may use this for passing around arbitrary extra data they might
need during migration. The QEMU driver needs to do a few things:
- Pass hostname/uuid to allow strict protection against localhost
migration attempts
- Pass SPICE/VNC server port from the target back to the source to
allow seamless relocation of client sessions
- Pass lock driver state from source to destination
This patch introduces the basic glue for handling cookies
but only includes the host/guest UUID & name.
* src/libvirt_private.syms: Export virXMLParseStrHelper
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Parsing
and formatting of migration cookies
* src/qemu/qemu_driver.c: Pass in cookie parameters where possible
* src/remote/remote_protocol.h, src/remote/remote_protocol.x: Change
cookie max length to 16384 bytes
Change all the driver struct initializers to use the
C99 style, leaving out unused fields. This will make
it possible to add new APIs without changing every
driver. eg change:
qemudDomainResume, /* domainResume */
qemudDomainShutdown, /* domainShutdown */
NULL, /* domainReboot */
qemudDomainDestroy, /* domainDestroy */
to
.domainResume = qemudDomainResume,
.domainShutdown = qemudDomainShutdown,
.domainDestroy = qemudDomainDestroy,
And get rid of any existing C99 style initializersr which
set NULL, eg change
.listPools = vboxStorageListPools,
.numOfDefinedPools = NULL,
.listDefinedPools = NULL,
.findPoolSources = NULL,
.poolLookupByName = vboxStoragePoolLookupByName,
to
.listPools = vboxStorageListPools,
.poolLookupByName = vboxStoragePoolLookupByName,
Fix some driver names:
s/virDrvCPUCompare/virDrvCompareCPU/
s/virDrvCPUBaseline/virDrvBaselineCPU/
s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/
s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/
s/virDrvSecretListSecrets/virDrvListSecrets/
And some driver struct field names:
s/getFreeMemory/nodeGetFreeMemory/
Only in drivers which use virDomainObj, drivers that query hypervisor
for domain status need to be updated separately in case their hypervisor
supports this functionality.
The reason is also saved into domain state XML so if a domain is not
running (i.e., no state XML exists) the reason will be lost by libvirtd
restart. I think this is an acceptable limitation.
This is needed if we want to transfer a temporary file. If the
transfer is done with iohelper, we might run into a race condition,
where we unlink() file before iohelper is executed.
* src/fdstream.c, src/fdstream.h,
src/util/iohelper.c: Add new option
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
src/storage/storage_driver.c, src/uml/uml_driver.c,
src/xen/xen_driver.c: Expand existing function calls
We were 31/73 on whether to translate; since less than 50% translated
and since VIR_INFO is less than VIR_WARN which also doesn't translate,
this makes sense.
* cfg.mk (sc_prohibit_gettext_markup): Add VIR_INFO, since it
falls between WARN and DEBUG.
* daemon/libvirtd.c (qemudDispatchSignalEvent, remoteCheckAccess)
(qemudDispatchServer): Adjust offenders.
* daemon/remote.c (remoteDispatchAuthPolkit): Likewise.
* src/network/bridge_driver.c (networkReloadIptablesRules)
(networkStartNetworkDaemon, networkShutdownNetworkDaemon)
(networkCreate, networkDefine, networkUndefine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainDefine)
(qemudDomainUndefine): Likewise.
* src/storage/storage_driver.c (storagePoolCreate)
(storagePoolDefine, storagePoolUndefine, storagePoolStart)
(storagePoolDestroy, storagePoolDelete, storageVolumeCreateXML)
(storageVolumeCreateXMLFrom, storageVolumeDelete): Likewise.
* src/util/bridge.c (brProbeVnetHdr): Likewise.
* po/POTFILES.in: Drop src/util/bridge.c.
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Introduce a virProcessKill function that can be safely called
even when the job mutex is held. This allows virDomainDestroy
to kill any VM even if it is asleep in a monitor job. The PID
will die and the thread asleep on the monitor will then wake
up releasing the job mutex.
* src/qemu/qemu_driver.c: Kill process before using qemuProcessStop
to ensure job is released
* src/qemu/qemu_process.c: Add virProcessKill for killing off
QEMU processes
This matches the public API and helps to get rid of some special
case code in the remote generator.
Rename driver API functions and XDR protocol structs.
No functional change included outside of the remote generator.
As well as taint warnings going to the main libvirt log,
add taint warnings to the per-domain logfile
Domain id=3 is tainted: high-privileges
Domain id=3 is tainted: disk-probing
Domain id=3 is tainted: shell-scripts
Domain id=3 is tainted: custom-monitor
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Enhance
qemuDomainTaint to also log to the domain logfile
* src/qemu/qemu_driver.c: Pass -1 for logFD to taint methods to
auto-append to logfile
* src/qemu/qemu_process.c: Pass open logFD at startup for taint
methods
Wire up logging of VM tainting to the QEMU driver
- If running QEMU as root user/group or without capabilities
being cleared
- If passing custom QEMU command line args
- If issuing custom QEMU monitor commands
- If using a network interface config with an associated
shell script
- If using a disk config relying on format probing
The warnings, per-VM appear in the main libvirtd logs
11:56:17.571: 10832: warning : qemuDomainObjTaint:712 : Domain id=1 name='l2' uuid=c7a3edbd-edaf-9455-926a-d65c16db1802 is tainted: high-privileges
11:56:17.571: 10832: warning : qemuDomainObjTaint:712 : Domain id=1 name='l2' uuid=c7a3edbd-edaf-9455-926a-d65c16db1802 is tainted: disk-probing
The taint flags are reset when the VM is stopped.
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Helper APIs
for logging taint warnings
* src/qemu/qemu_driver.c: Log tainting with custom QEMU monitor
commands and disk/net hotplug with unsupported configs
* src/qemu/qemu_process.c: Log tainting at startup based on
unsupported configs
Clang 2.8 wasn't quite able to follow that persistentDef was
assigned earlier if (flags & VIR_DOMAIN_MEM_CONFIG) is true.
Silence this false positive, to make clang analysis easier to use.
* src/qemu/qemu_driver.c (qemudDomainSetMemoryFlags): Add an
annotation to silence clang's claim of a NULL dereference.
This code has had problems historically. As originally
written, in commit 6bcf2501 (Jun 08), it could call unlink
on a random string, nuking an unrelated file.
Then commit 182a80b9 (Sep 09), the code was rewritten to
allocate tmp, with both a use-after-free bug and a chance to
call unlink(NULL).
Commit e206946 (Mar 11) fixed the use-after-free, but not the
NULL dereference. Thanks to clang for catching this!
* src/qemu/qemu_driver.c (qemudDomainMemoryPeek): Don't call
unlink on NULL.
This commit fixes
qemu/qemu_driver.c: In function 'qemuDomainModifyDeviceFlags':
qemu/qemu_driver.c:4041:8: warning: 'ret' may be used uninitialized in this
function [-Wuninitialized]
qemu/qemu_driver.c:4013:9: note: 'ret' was declared here
The variable is set to -1 so that the error paths are taken when the code
to set it didn't get a chance to run. Without initializing it, we could
return some an undefined value from this function.
While I was at it, I made a trivial whitespace change in the same function
to improve readability.
Support update of disks by MODIFY_CONFIG
This patch includes changes for qemu's disk to support
virDomainUpdateDeviceFlags() with VIR_DOMAIN_DEVICE_MODIFY_CONFIG.
This patch adds support for CDROM/foppy disk types.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
* src/qemu/qemu_driver.c
(qemuDomainUpdateDeviceConfig): support cdrom/floppy.
Support changes of disks by MODIFY_CONFIG for qemu.
This patch includes patches for qemu's disk to support
virDomainAt(De)tachDeviceFlags with VIR_DOMAIN_DEVICE_MODIFY_CONFIG.
Other devices can be added incrementally.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
* /src/conf/domain_conf.c
(virDomainDiskIndexByName): returns array index of disk in vmdef.
(virDomainDiskRemoveByName): removes a disk which has the name in vmdef.
* src/qemu/qemu_driver.c
(qemuDomainAttachDeviceConfig): add support for Disks.
(qemuDomainDetachDeviceConfig): add support for Disks.
This patch adds functions for modify domain's persistent definition.
To do error recovery in easy way, we use a copy of vmdef and update it.
The whole sequence will be:
make a copy of domain definition.
if (flags & MODIFY_CONFIG)
update copied domain definition
if (flags & MODIF_LIVE)
do hotplug.
if (no error)
save copied one to the file and update cached definition.
else
discard copied definition.
This patch is mixuture of Eric Blake's work and mine.
From: Eric Blake <eblake@redhat.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
(virDomainObjCopyPersistentDef): make a copy of persistent vm definition
(qemuDomainAttach/Detach/UpdateDeviceConfig) : callbacks. now empty
(qemuDomainModifyDeviceFlags): add support for MODIFY_CONFIG and MODIFY_CURRENT
This patch strips reusable part of qemuDomainUpdateDeviceFlags()
and consolidate it to qemuDomainModifyDeviceFlags().
No functional changes.
* src/qemu/qemu_driver.c
(qemuDomainChangeDiskMediaLive) : pulled out code for updating disks.
(qemuDomainUpdateDeviceLive) : core of UpdateDevice, extracted from
UpdateDeviceFlags()
(qemuDomainModifyDeviceFlags): add support for updating device in live domain.
(qemuDomainUpdateDeviceFlags): reworked as a wrapper function of
qemuDomainModifyDeviceFlags()
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
clean up At(De)tachDeviceFlags() for consolidation.
qemuDomainAttachDeviceFlags()/qemuDomainDetachFlags()/
qemuDomainUpdateDeviceFlags() has similar logics and copied codes.
This patch series tries to unify them to use shared code when it can.
At first, clean up At(De)tachDeviceFlags() and devide it into functions.
By this, this patch pulls out shared components between functions.
Based on patch series by Eric Blake, I added some modification as
switch-case with QEMU_DEVICE_ATTACH, QEMU_DEVICE_DETACH, QEMU_DEVICE_UPDATE
* src/qemu/qemu_driver.c
(qemuDomainAt(De)tachDeviceFlags) : pulled out to qemuDomainModifyDeviceFlags()
(qemuDomainModifyDeviceFlags) : implements generic code for modifying domain.
(qemuDomainAt(De)tachDeviceFlagsLive) : code for at(de)taching devices to
domain in line. no changes in logic from old code.
(qemuDomainAt(De)tachDeviceDiskLive) : for at(de)taching Disks.
(qemuDomainAt(De)tachDeviceControllerLive) : for at(de)taching Controllers
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Centralize device modification in the more flexible APIs, to allow future
honoring of additional flags. Explicitly reject the
VIR_DOMAIN_DEVICE_MODIFY_FORCE flag on attach/detach.
Based on Eric Blake<eblake@redhat.com>'s work.
* src/qemu/qemu_driver.c
(qemudDomainAttachDevice)(qemudDomainAttachDeviceFlags): Swap bodies,rename...
(qemudDomainDetachDevice, qemudDomainDetachDeviceFlags): Likewise.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch does the following two things:
1. hold an extra reference while handling watchdog event
If the domain is not persistent, and qemu quits unexpectedly before
calling processWatchdogEvent(), vm will be freed and the function
processWatchdogEvent() will be dangerous.
2. unlock qemu driver and vm before returning from processWatchdogEvent()
When the function processWatchdogEvent() failed, we only free wdEvent,
but forget to unlock qemu driver and vm, free dumpfile.
We do not lock qemu_driver when calling virThreadPoolNew(). If it failed,
we will unlock qemu_driver. It is dangerous.
We may use this pool during auto starting domains. So we must create it before
calling qemuAutostartDomains(). Otherwise, libvirtd will crash.
This patch enables the migration of Qemu VMs between hosts of different endianess. I tested this by migrating a i686 VM between a x86 and ppc64 host.
I am converting the 'int's in the VM's state header to uint32_t assuming this doesn't break compatibility with existing deployments other than Linux.
The methods qemuDomain{Get,Set}{Memory,Blkio,Scheduler}Parameters
all forgot to do a check on virDomainIsActive(), resulting in bogus
error messages from later parts of their impl
* src/qemu/qemu_driver.c: Add missing checks on virDomainIsActive()
This patch implements the code to support virDomainSetMaxMemory API,
and to support VIR_DOMAIN_MEM_MAXIMUM flag in qemudDomainSetMemoryFlags function.
As a result, we can change the maximum memory size of inactive QEMU guests.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch adds virDomainSetMemoryFlags(,,VIR_DOMAIN_MEM_CURRENT) support
code to qemu driver.
Also, change virDomainObjIsActive to return bool, given its usage.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
1) Both "qemuDomainStartWithFlags" and "qemuAutostartDomain" try to
restore the domain from managedsave'ed image if it exists (by
invoking "qemuDomainObjRestore"), but it unlinks the image even
if restoring fails, which causes data loss. (This problem exists
for "virsh managedsave dom; virsh start dom").
The fix for is to unlink the managed state file only if restoring
succeeded.
2) For "virsh save dom; virsh restore dom;", it can cause data
corruption if one reuse the saved state file for restoring. Add
doc to tell user about it.
3) In "qemuDomainObjStart", if "managed_save" is NULL, we shouldn't
fallback to start the domain, skipping it to cleanup as a incidental
fix. Discovered by Eric.
Even with -Wuninitialized (which is part of autobuild.sh
--enable-compile-warnings=error), gcc does NOT catch this
use of an uninitialized variable:
{
if (cond)
goto error;
int a = 1;
error:
printf("%d", a);
}
which prints 0 (supposing the stack started life wiped) if
cond was true. Clang will catch it, but we don't use clang
as often. Using gcc -Wjump-misses-init catches it, but also
gives false positives:
{
if (cond)
goto error;
int a = 1;
return a;
error:
return 0;
}
Here, a was never used in the scope of the error block, so
declaring it after goto is technically fine (and clang agrees).
However, given that our HACKING already documents a preference
to C89 decl-before-statement, the false positive warning is
enough of a prod to comply with HACKING.
[Personally, I'd _really_ rather use C99 decl-after-statement
to minimize scope, but until gcc can efficiently and reliably
catch scoping and uninitialized usage bugs, I'll settle with
the compromise of enforcing a coding standard that happens to
reject false positives if it can also detect real bugs.]
* acinclude.m4 (LIBVIRT_COMPILE_WARNINGS): Add -Wjump-misses-init.
* src/util/util.c (__virExec): Adjust offenders.
* src/conf/domain_conf.c (virDomainTimerDefParseXML): Likewise.
* src/remote/remote_driver.c (doRemoteOpen): Likewise.
* src/phyp/phyp_driver.c (phypGetLparNAME, phypGetLparProfile)
(phypGetVIOSFreeSCSIAdapter, phypVolumeGetKey)
(phypGetStoragePoolDevice)
(phypVolumeGetPhysicalVolumeByStoragePool)
(phypVolumeGetPath): Likewise.
* src/vbox/vbox_tmpl.c (vboxNetworkUndefineDestroy)
(vboxNetworkCreate, vboxNetworkDumpXML)
(vboxNetworkDefineCreateXML): Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject)
(xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/security/security_selinux.c (SELinuxGenNewContext):
Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia):
Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetPtyPaths):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainShutdown)
(qemudDomainBlockStats, qemudDomainMemoryPeek): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendCreateIfaceIQN): Likewise.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
We create a temporary file to save memory, and we will remove it after reading
memory to buffer. But we free the variable that contains the temporary filename
before we remove it. So we should free tmp after unlinking it.
Currently libvirt's default logging is limited and it is difficult to
determine what was happening when a proglem occurred (especially on a
machines where one don't know the detail.) This patch helps to do that
by making additional logging available for the following events:
creating/defining/undefining domains
creating/defining/undefining/starting/stopping networks
creating/defining/undefining/starting/stopping storage pools
creating/defining/undefining/starting/stopping storage volumes.
* AUTHORS: add Naoya Horiguchi
* src/network/bridge_driver.c src/qemu/qemu_driver.c
src/storage/storage_driver.c: provide more VIR_INFO logging
When domain startup, setting cpu affinity and cpu shares according
to the cputune xml specified in domain xml.
Modify "qemudDomainPinVcpu" to update domain config for vcpupin,
and modify "qemuSetSchedulerParameters" to update domain config
for cpu shares.
v1 - v2:
* Use "VIR_ALLOC_N" instead of "VIR_ALLOC_VAR"
* But keep raising error when it fails on adding vcpupin xml
entry, as I still don't have a better idea yet.
The O_NONBLOCK flag doesn't work as desired on plain files
or block devices. Introduce an I/O helper program that does
the blocking I/O operations, communicating over a pipe that
can support O_NONBLOCK
* src/fdstream.c, src/fdstream.h: Add non-blocking I/O
on plain files/block devices
* src/Makefile.am, src/util/iohelper.c: I/O helper program
* src/qemu/qemu_driver.c, src/lxc/lxc_driver.c,
src/uml/uml_driver.c, src/xen/xen_driver.c: Update for
streams API change
This points out that core dumps (still) don't work for root-squash
NFS, since the fd is not opened correctly. This patch should not
introduce any functionality change, it is just a refactoring to
avoid duplicated code.
* src/qemu/qemu_migration.h (qemuMigrationToFile): New prototype.
* src/qemu/qemu_migration.c (qemuMigrationToFile): New function.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag, doCoreDump): Use
it.
Direct access to an open file is so much simpler than passing
everything through a pipe!
* src/qemu/qemu_driver.c (qemudOpenAsUID)
(qemudDomainSaveImageClose): Delete.
(qemudDomainSaveImageOpen): Rename...
(qemuDomainSaveImageOpen): ...and drop read_pid argument. Use
virFileOpenAs instead of qemudOpenAsUID.
(qemudDomainSaveImageStartVM, qemudDomainRestore)
(qemudDomainObjRestore): Rename...
(qemuDomainSaveImageStartVM, qemuDomainRestore)
(qemDomainObjRestore): ...and simplify accordingly.
(qemudDomainObjStart, qemuDriver): Update callers.
This patch intentionally doesn't change indentation, in order to
make it easier to review the real changes.
* src/util/util.h (VIR_FILE_OP_RETURN_FD, virFileOperationHook):
Delete.
(virFileOperation): Rename...
(virFileOpenAs): ...and reduce parameters.
* src/util/util.c (virFileOperationNoFork, virFileOperation):
Rename and simplify.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Adjust caller.
* src/storage/storage_backend.c (virStorageBackendCreateRaw):
Likewise.
* src/libvirt_private.syms: Reflect rename.
This allows direct saves (no compression, no root-squash NFS) to use
the more efficient fd: migration, which in turn avoids a race where
qemu exec: migration can sometimes fail because qemu does a generic
waitpid() that conflicts with the pclose() used by exec:. Further
patches will solve compression and root-squash NFS.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Use new function
when there is no compression.
Otherwise, if something like doStopVcpus fails after the first
restore, a second restore is attempted and throws a useless
warning.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Avoid second
restore of state label.
Add missing open curly brace between function declaration of non-linux
variant of qemudDomainInterfaceStats() and its body.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Steps to reproduce this bug:
1. virsh attach-disk domain --source diskimage --target sdb --sourcetype file --driver qemu --subdriver qcow2
error: Failed to attach disk
error: operation failed: adding scsi-disk,bus=scsi0.0,scsi-id=1,drive=drive-scsi0-0-1,id=scsi0-0-1 device failed: Property 'scsi-disk.drive' can't find value 'drive-scsi0-0-1'
2. service libvirtd restart
Stopping libvirtd daemon: [ OK ]
Starting libvirtd daemon: [ OK ]
3. virsh attach-disk domain --source diskimage --target sdb --sourcetype file --driver qemu --subdriver raw
error: Failed to attach disk
error: operation failed: adding lsi,id=scsi0,bus=pci.0,addr=0x6 device failed: Duplicate ID 'scsi0' for device
The reason is that we create a new scsi controller but we do not update
/var/run/libvirt/qemu/domain.xml.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Enhance the QEMU migration monitoring loop, so that it can get
a signal to change migration speed on the fly
* src/qemu/qemu_domain.h: Add signal for changing speed on the fly
* src/qemu/qemu_driver.c: Wire up virDomainMigrateSetSpeed driver
* src/qemu/qemu_migration.c: Support signal for changing speed
It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions
* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_driver.c, src/xen/xen_driver.c,
src/libxl/libxl_driver.c: Stub new API
THREADS.txt states that the contents of vm should not be read or
modified while the vm lock is not held, but that the lock must not
be held while performing a monitor command. This fixes all the
offenders that I could find.
* src/qemu/qemu_process.c (qemuProcessStartCPUs)
(qemuProcessInitPasswords, qemuProcessStart): Don't modify or
refer to vm state outside lock.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeGraphicsPasswords):
Likewise.
This bug was reported by Shi Jin(jinzishuai@gmail.com):
=============
# virsh attach-disk RHEL6RC /var/lib/libvirt/images/test3.img vdb \
--driver file --subdriver qcow2
Disk attached successfully
# virsh save RHEL6RC /var/lib/libvirt/images/memory.save
Domain RHEL6RC saved to /var/lib/libvirt/images/memory.save
# virsh restore /var/lib/libvirt/images/memory.save
error: Failed to restore domain from /var/lib/libvirt/images/memory.save
error: internal error unsupported driver name 'file'
for disk '/var/lib/libvirt/images/test3.img'
=============
We check the driver name when we start or restore VM, but we do
not check it while attaching a disk. This adds the same check on disk
driverName used in qemuBuildCommandLine to qemudDomainAttachDevice.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
* Correct the documentation for cgroup: the swap_hard_limit indicates
mem+swap_hard_limit.
* Change cgroup private apis to: virCgroupGet/SetMemSwapHardLimit
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Adding audit points showed that we were granting too much privilege
to qemu; it should not need any mknod rights to recreate any
devices. On the other hand, lxc should have all device privileges.
The solution is adding a flag parameter.
This also lets us restrict write access to read-only disks.
* src/util/cgroup.h (virCgroup*Device*): Adjust prototypes.
* src/util/cgroup.c (virCgroupAllowDevice)
(virCgroupAllowDeviceMajor, virCgroupAllowDevicePath)
(virCgroupDenyDevice, virCgroupDenyDeviceMajor)
(virCgroupDenyDevicePath): Add parameter.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update clients.
* src/lxc/lxc_controller.c (lxcSetContainerResources): Likewise.
* src/qemu/qemu_cgroup.c: Likewise.
(qemuSetupDiskPathAllow): Also, honor read-only disks.
Device names can be manipulated, so it is better to also log
the major/minor device number corresponding to the cgroup ACL
changes that libvirt made. This required some refactoring
of the relatively new qemu cgroup audit code.
Also, qemuSetupChardevCgroup was only auditing on failure, not success.
* src/qemu/qemu_audit.h (qemuDomainCgroupAudit): Delete.
(qemuAuditCgroup, qemuAuditCgroupMajor, qemuAuditCgroupPath): New
prototypes.
* src/qemu/qemu_audit.c (qemuDomainCgroupAudit): Rename...
(qemuAuditCgroup): ...and drop a parameter.
(qemuAuditCgroupMajor, qemuAuditCgroupPath): New functions, to
allow listing device major/minor in audit.
(qemuAuditGetRdev): New helper function.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Adjust callers.
* src/qemu/qemu_cgroup.c (qemuSetupDiskPathAllow)
(qemuSetupHostUsbDeviceCgroup, qemuSetupCgroup)
(qemuTeardownDiskPathDeny): Likewise.
(qemuSetupChardevCgroup): Likewise, fixing missing audit.
virRun gives pretty useful error output, let's not overwrite it unless there
is a good reason. Some places were providing more information about what
the commands were _attempting_ to do, however that's usually less useful from
a debugging POV than what actually happened.
The way to detach a USB disk is the same as that to detach a SCSI
disk. Rename this function and we can use it to detach a USB disk.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
qemudDomainSaveImageStartVM was evil - it closed the incoming fd
argument on some, but not all, code paths, without informing the
caller about that action. No wonder that this resulted in
double-closes: https://bugzilla.redhat.com/show_bug.cgi?id=672725
* src/qemu/qemu_driver.c (qemudDomainSaveImageStartVM): Alter
signature, to avoid double-close.
(qemudDomainRestore, qemudDomainObjRestore): Update callers.
Relax the restriction that the hash table key must be a string
by allowing an arbitrary hash code generator + comparison func
to be provided
* util/hash.c, util/hash.h: Allow any pointer as a key
* internal.h: Include stdbool.h as standard.
* conf/domain_conf.c, conf/domain_conf.c,
conf/nwfilter_params.c, nwfilter/nwfilter_gentech_driver.c,
nwfilter/nwfilter_gentech_driver.h, nwfilter/nwfilter_learnipaddr.c,
qemu/qemu_command.c, qemu/qemu_driver.c,
qemu/qemu_process.c, uml/uml_driver.c,
xen/xm_internal.c: s/char */void */ in hash callbacks
This is done for two reasons:
- we are getting very close to 64 flags which is the maximum we can use
with unsigned long long
- by using LL constants in enum we already violates C99 constraint that
enum values have to fit into int
The introduction of the v3 migration protocol, along with
support for migration cookies, will significantly expand
the size of the migration code. Move it all to a separate
file to make it more manageable
The functions are not moved 100%. The API entry points
remain in the main QEMU driver, but once the public
virDomainPtr is resolved to the internal virDomainObjPtr,
all following code is moved.
This will allow the new v3 API entry points to call into the
same shared internal migration functions
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
qemuDomainFormatXML helper method
* src/qemu/qemu_driver.c: Remove all migration code
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add
all migration code.
Move the qemudStartVMDaemon and qemudShutdownVMDaemon
methods into a separate file, renaming them to
qemuProcessStart, qemuProcessStop. All helper methods
called by these are also moved & renamed to match
* src/Makefile.am: Add qemu_process.c/.h
* src/qemu/qemu_command.c: Add qemuDomainAssignPCIAddresses
* src/qemu/qemu_command.h: Add VNC port min/max
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
domain event queue helpers
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
all QEMU process startup/shutdown functions
* src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add
all QEMU process startup/shutdown functions
"qemudDomainSaveFlag" goto wrong label "endjob", which will cause
error when security manager trying to restore label (regression).
As it's more reasonable to check if vm is shutoff immediately, and
return right away if it is, remove the checking in "qemudDomainSaveFlag",
and add checking in "qemudDomainSave".
* src/qemu/qemu_driver.c
The processWatchdogEvent fix is real, although it can only trigger
on OOM, since bad things happen if doCoreDump is called with a NULL
pathname argument. The other fixes silence clang, but aren't a real
bug because virReportErrorHelper tolerates a NULL format string even
though *printf does not.
* src/qemu/qemu_driver.c (processWatchdogEvent): Exit on OOM.
(qemuDomainIsActive, qemuDomainIsPersistent, qemuDomainIsUpdated):
Provide valid message.
Commit 9962e406c6 introduced a
problem where if the VM failed to startup, it would not be
correctly cleaned up. Amongst other things the SELinux
security label would not be removed, which prevents the VM
from ever starting again.
The virDomainIsActive() check at the start of qemudShutdownVMDaemon
checks for vm->def->id not being -1. By moving the assignment of the
VM id to the start of qemudStartVMDaemon, we can ensure cleanup will
occur on failure
* src/qemu/qemu_driver.c: Move initialization of 'vm->def->id'
so that qemudShutdownVMDaemon() will process the shutdown
QEMUD_CMD_FLAG_PCI_MULTIBUS should be set in the function
qemuCapsExtractVersionInfo()
The flag QEMUD_CMD_FLAG_PCI_MULTIBUS is used in the function
qemuBuildDeviceAddressStr(). All callers get qemuCmdFlags
by the function qemuCapsExtractVersionInfo() except that
testCompareXMLToArgvFiles() in qemuxml2argvtest.c.
So we should set QEMUD_CMD_FLAG_PCI_MULTIBUS in the function
qemuCapsExtractVersionInfo() instead of qemuBuildCommandLine()
because the function qemuBuildCommandLine() does not be called
when we attach a pci device.
tests: set QEMUD_CMD_FLAG_PCI_MULTIBUS in testCompareXMLToArgvFiles()
set QEMUD_CMD_FLAG_PCI_MULTIBUS before calling qemuBuildCommandLine()
as the flags is not set by qemuCapsExtractVersionInfo().
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Quite a few hosts don't have cgroups mounted and so see warnings
from libvirt logged, which then cause bug reports, etc. Reduce
the log level to INFO so they're not visible by default
* src/qemu/qemu_driver.c: Reduce log level for cgroups
Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:
virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'
which is not a very convenient way of debugging qemu.
This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just
virsh qemu-monitor-command --hmp DOM "info kvm"
Also the result is converted from
{"return":"kvm support: enabled\r\n"}
to just plain HMP:
kvm support: enabled
If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.
* src/qemu/qemu_driver.c (qemudShutdownVMDaemon): Check that vm is
still active.
Reported by Wen Congyang as follows:
Steps to reproduce this bug:
1. use gdb to debug libvirtd, and set breakpoint in the function
qemuConnectMonitor()
2. start a vm, and the libvirtd will be stopped in qemuConnectMonitor()
3. kill -STOP $(cat /var/run/libvirt/qemu/<domain>.pid)
4. continue to run libvirtd in gdb, and libvirtd will be blocked in the
function qemuMonitorSetCapabilities()
5. kill -9 $(cat /var/run/libvirt/qemu/<domain>.pid)
Here is log of the qemu:
=========
LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin ...
char device redirected to /dev/pts/3
2011-01-27 09:38:48.101: shutting down
2011-01-27 09:41:26.401: shutting down
=========
The vm is shut down twice. I do not know whether this behavior has
side effect, but I think we should shutdown the vm only once.
The refactoring of QEMU command startup was comitted with
a couple of VIR_WARN lines left in from debugging.
* src/qemu/qemu_driver.c: Remove log warning lines
When qemuMonitorSetCapabilities() fails, there is no need to
call qemuMonitorClose(), because the caller will already see
the error code and tear down the entire VM. The extra call to
qemuMonitorClose resulted in a double-free due to it removing
a ref count prematurely.
* src/qemu/qemu_driver.c: Remove premature close of monitor
Regression in commit caa805ea let a lot of bad messages slip in.
* cfg.mk (msg_gen_function): Fix function name.
* src/qemu/qemu_cgroup.c (qemuRemoveCgroup): Fix fallout from
'make syntax-check'.
* src/qemu/qemu_driver.c (qemudDomainGetInfo)
(qemuDomainWaitForMigrationComplete, qemudStartVMDaemon)
(qemudDomainSaveFlag, qemudDomainAttachDevice)
(qemuDomainUpdateDeviceFlags): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachHostUsbDevice)
(qemuDomainDetachPciDiskDevice, qemuDomainDetachSCSIDiskDevice):
Likewise.
Steps to reproduce this bug:
1. service libvirtd start
2. virsh start <domain>
3. kill -STOP $(cat /var/run/libvirt/qemu/<domain>.pid)
4. service libvirtd restart
5. kill -9 $(cat /var/run/libvirt/qemu/<domain>.pid)
Then libvirtd will core dump or be in deadlock state.
Make sure that json is built into libvirt and the version
of qemu is newer than 0.13.0.
The reason of libvirtd cores dump is that:
We add vm->refs when we alloc the memory, and decrease it
in the function qemuHandleMonitorEOF() in other thread.
We add vm->refs in the function qemuConnectMonitor() and
decrease it when the vm is inactive.
The libvirtd will block in the function qemuMonitorSetCapabilities()
because the vm is stopped by signal SIGSTOP. Now the vm->refs is 2.
Then we kill the vm by signal SIGKILL. The function
qemuMonitorSetCapabilities() failed, and then we will decrease vm->refs
in the function qemuMonitorClose().
In another thread, mon->fd is broken and the function
qemuHandleMonitorEOF() is called.
If qemuHandleMonitorEOF() decreases vm->refs before qemuConnectMonitor()
returns, vm->refs will be decrease to 0 and the memory is freed.
We will call qemudShutdownVMDaemon() as qemuConnectMonitor() failed.
The memory has been freed, so qemudShutdownVMDaemon() is too dangerous.
We will reference NULL pointer in the function virDomainConfVMNWFilterTeardown():
=============
void
virDomainConfVMNWFilterTeardown(virDomainObjPtr vm) {
int i;
if (nwfilterDriver != NULL) {
for (i = 0; i < vm->def->nnets; i++)
virDomainConfNWFilterTeardown(vm->def->nets[i]);
}
}
============
vm->def->nnets is not 0 but vm->def->nets is NULL(We don't set vm->def->nnets
to 0 when we free vm).
We should add an extra reference of vm to avoid vm to be deleted if
qemuConnectMonitor() failed.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
If a guest image is saved in compressed format, and the restore fails
in some way after the intermediate process used to uncompress the
image has been started, but before qemu has been started to hook up to
the uncompressor, libvirt will endlessly wait for the uncompressor to
finish, but it never will because it's still waiting to have something
hooked up to drain its output.
The solution is to close the pipes on both sides of the uncompressor,
then send a SIGTERM before calling waitpid on it (only if the restore
has failed, of course).
This patch is a partial resolution to the following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=667756
(to complete the fix, an updated selinux-policy package is required,
to add the policy that allows libvirt to set the context of a fifo,
which was previously not allowed).
Explanation : When an incoming migration is over a pipe (for example,
if the image was compressed and is being fed through gzip, or was on a
root-squash nfs server, so needed to be opened by a child process
running as a different uid), qemu cannot read it unless the selinux
context label for the pipe has been set properly.
The solution is to check the fd used as the source of the migration
just before passing it to qemu; if it's a fifo (implying that it's a
pipe), we call the newly added virSecurityManagerSetFDLabel() function
to set the context properly.
The problem was introduced by commit 4303c91, which removed the checking
of domain state, this patch is to fix it.
Otherwise, improper error will be thrown, e.g.
error: Failed to save domain rhel6 state
error: cannot resolve symlink /var/lib/libvirt/qemu/save/rhel6.save: No such
file or directory
QEMU supports serving VNC over a unix domain socket rather than traditional
TCP host/port. This is specified with:
<graphics type='vnc' socket='/foo/bar/baz'/>
This provides better security access control than VNC listening on
127.0.0.1, but will cause issues with tools that rely on the lax security
(virt-manager in fedora runs as regular user by default, and wouldn't be
able to access a socket owned by 'qemu' or 'root').
Also not currently supported by any clients, though I have patches for
virt-manager, and virt-viewer should be simple to update.
v2:
schema: Make listen vs. socket a <choice>
This will allow us to record transient runtime state in vm->def, like
default VNC parameters. Accomplish this by adding an extra 'live' parameter
to SetDefTransient, with similar semantics to the 'live' flag for
AssignDef.
Avoid overwriting the real error message with a generic
OOM failure message, when machine type probe fails
* src/qemu/qemu_driver.c: Don't overwrite error
The function virUnrefConnect() may call virReleaseConnect() to release
the dest connection, and the function virReleaseConnect() will call
conn->driver->close().
So the function virUnrefConnect() should be surrounded by
qemuDomainObjEnterRemoteWithDriver() and
qemuDomainObjExitRemoteWithDriver() to prevent possible deadlock between
two communicating libvirt daemons.
See commit f0c8e1cb37 for further details.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
In some circumstances, libvirtd would issue two STOPPED events after it
stopped a domain. This was because an EOF event can arrive after a qemu
process is killed but before qemuMonitorClose() is called.
qemuHandleMonitorEOF() should ignore EOF when the domain is not running.
I wasn't able to reproduce this bug directly, only after adding an
artificial sleep() into qemudShutdownVMDaemon().
https://bugzilla.redhat.com/show_bug.cgi?id=620363
When using -incoming stdio or -incoming exec:, qemu keeps the
stdin fd open long after the migration is complete. Not to
mention that exec:cat is horribly inefficient, by doubling the
I/O and going through a popen interface in qemu.
The new -incoming fd: of qemu 0.12.0 closes the fd after using
it, and allows us to bypass an intermediary cat process for
less I/O.
* src/qemu/qemu_command.h (qemuBuildCommandLine): Add parameter.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Support
migration via fd: when possible. Consolidate migration handling
into one spot, now that it is more complex.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Update caller.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.args: New file.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.xml: Likewise.
Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: Justin Clift <jclift@redhat.com>
We try to use that command first when setting a VNC/SPICE password. If
that doesn't work we fallback to the legacy VNC only password
Allow an expiry time to be set, if that doesn't work, throw an error
if they try to use SPICE.
Change since v1:
- moved qemuInitGraphicsPasswords to qemu_hotplug, renamed
to qemuDomainChangeGraphicsPasswords.
- updated what looks like a typo (that appears to work anyway) in
initial patch from Daniel:
- ret = qemuInitGraphicsPasswords(driver, vm,
- VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
- &vm->def->graphics[0]->data.vnc.auth,
- driver->vncPassword);
+ ret = qemuInitGraphicsPasswords(driver, vm,
+ VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
+ &vm->def->graphics[0]->data.spice.auth,
+ driver->spicePassword);
Based on patch by Daniel P. Berrange <berrange@redhat.com>.
The current security driver usage requires horrible code like
if (driver->securityDriver &&
driver->securityDriver->domainSetSecurityHostdevLabel &&
driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver,
vm, hostdev) < 0)
This pair of checks for NULL clutters up the code, making the driver
calls 2 lines longer than they really need to be. The goal of the
patchset is to change the calling convention to simply
if (virSecurityManagerSetHostdevLabel(driver->securityDriver,
vm, hostdev) < 0)
The first check for 'driver->securityDriver' being NULL is removed
by introducing a 'no op' security driver that will always be present
if no real driver is enabled. This guarentees driver->securityDriver
!= NULL.
The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel'
being non-NULL is hidden in a new abstraction called virSecurityManager.
This separates the driver callbacks, from main internal API. The addition
of a virSecurityManager object, that is separate from the virSecurityDriver
struct also allows for security drivers to carry state / configuration
information directly. Thus the DAC/Stack drivers from src/qemu which
used to pull config from 'struct qemud_driver' can now be moved into
the 'src/security' directory and store their config directly.
* src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to
use new virSecurityManager APIs
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h
src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h:
Move into src/security directory
* src/security/security_stack.c, src/security/security_stack.h,
src/security/security_dac.c, src/security/security_dac.h: Generic
versions of previous QEMU specific drivers
* src/security/security_apparmor.c, src/security/security_apparmor.h,
src/security/security_driver.c, src/security/security_driver.h,
src/security/security_selinux.c, src/security/security_selinux.h:
Update to take virSecurityManagerPtr object as the first param
in all callbacks
* src/security/security_nop.c, src/security/security_nop.h: Stub
implementation of all security driver APIs.
* src/security/security_manager.h, src/security/security_manager.c:
New internal API for invoking security drivers
* src/libvirt.c: Add missing debug for security APIs
While doing some testing with Qemu and creating huge logfiles I encountered the case where the VM could not start anymore due to the lseek() to the end of the Qemu VM's log file failing. The patch below fixes the problem by replacing the previously used 'int' with 'off_t'.
To reproduce this error, you could do the following:
dd if=/dev/zero of=/var/log/libvirt/qemu/<name of VM>.log bs=1024 count=$((1024*2048))
and you should get an error like this:
error: Failed to start domain <name of VM>
error: Unable to seek to -2147482651 in /var/log/libvirt/qemu/<name of VM>.log: Success
This patch fixes https://bugzilla.redhat.com/show_bug.cgi?id=664406
If qemu is run as a different uid, it has been unable to access mode
0660 files that are owned by a different user, but with a group that
the qemu is a member of (aside from the one group listed in the passwd
file), because initgroups() is not being called prior to the
exec. initgroups will change the group membership of the process (and
its children) to match the new uid.
To make this happen, the setregid()/setreuid() code in
qemuSecurityDACSetProcessLabel has been replaced with a call to
virSetUIDGID(), which does both of those, plus calls initgroups.
Similar, but not identical, code in qemudOpenAsUID() has been replaced
with virSetUIDGID(). This not only consolidates the functionality to a
single location, but also potentially fixes some as-yet unreported
bugs.
Shorten qemuDomainSnapshotWriteSnapshotMetadata function name
and make it take a snapshot pointer instead of dealing with
the current snapshot. Update other functions accordingly.
Add a qemuDomainSnapshotReparentChildren hash iterator to
reparent the children of a snapshot that is being deleted. Use
qemuDomainSnapshotWriteMetadata to write updated metadata
to disk.
This fixes a problem where outdated parent information breaks
the snapshot tree and hinders the deletion of child snapshots.
Reported by Philipp Hahn.
The QEMU driver file is far too large. Move all the hotplug
helper code out into a separate file. No functional change.
* src/qemu/qemu_hotplug.c, src/qemu/qemu_hotplug.h,
src/Makefile.am: Add hotplug helper file
* src/qemu/qemu_driver.c: Delete hotplug code
To allow the APIs to be used from separate files, move the domain
lock / job helper code into qemu_domain.c
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add domain lock
/ job code
* src/qemu/qemu_driver.c: Remove domain lock / job code
To allow their use from other source files, move qemuDriverLock
and qemuDriverUnlock to qemu_conf.h and make them non-static
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuDriverLock
qemuDriverUnlock
* src/qemu/qemu_driver.c: Remove qemuDriverLock and qemuDriverUnlock
The QEMU driver file is far too large. Move all the hostdev
helper code out into a separate file. No functional change.
* src/qemu/qemu_hostdev.c, src/qemu/qemu_hostdev.h,
src/Makefile.am: Add hostdev helper file
* src/qemu/qemu_driver.c: Delete hostdev code
The QEMU driver file is far too large. Move all the cgroup
helper code out into a separate file. No functional change.
* src/qemu/qemu_cgroup.c, src/qemu/qemu_cgroup.h,
src/Makefile.am: Add cgroup helper file
* src/qemu/qemu_driver.c: Delete cgroup code
The QEMU driver file is far too large. Move all the audit
helper code out into a separate file. No functional change.
* src/qemu/qemu_audit.c, src/qemu/qemu_audit.h,
src/Makefile.am: Add audit helper file
* src/qemu/qemu_driver.c: Delete audit code
Move the code for handling the QEMU virDomainObjPtr private
data, and custom XML namespace into a separate file
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: New file
for private data & namespace code
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
private data & namespace code
* src/qemu/qemu_driver.h, src/qemu/qemu_command.h: Update
includes
* src/Makefile.am: Add src/qemu/qemu_domain.c
The qemu_conf.c code is doing three jobs, driver config file
loading, QEMU capabilities management and QEMU command line
management. Move the command line code into its own file
* src/qemu/qemu_command.c, src/qemu/qemu_command.h: New
command line management code
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete command
line code
* src/qemu/qemu_conf.h, src/qemu_conf.c: Adapt for API renames
* src/Makefile.am: add src/qemu/qemu_command.c
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Add
import of qemu_command.h
The qemu_conf.c code is doing three jobs, driver config file
loading, QEMU capabilities management and QEMU command line
management. Move the capabilities code into its own file
* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h: New
capabilities management code
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete capabilities
code
* src/qemu/qemu_conf.h: Adapt for API renames
* src/Makefile.am: add src/qemu/qemu_capabilities.c
Currently, all of domain "save/dump/managed save/migration"
use the same function "qemudDomainWaitForMigrationComplete"
to wait the job finished, but the error messages are all
about "migration", e.g. when a domain saving job is canceled
by user, "migration was cancled by client" will be throwed as
an error message, which will be confused for user.
As a solution, intoduce two new job types(QEMU_JOB_SAVE,
QEMU_JOB_DUMP), and set "priv->jobActive" to "QEMU_JOB_SAVE"
before saving, to "QEMU_JOB_DUMP" before dumping, so that we
could get the real job type in
"qemudDomainWaitForMigrationComplete", and give more clear
message further.
And as It's not important to figure out what's the exact job
is in the DEBUG and WARN log, also we don't need translated
string in logs, simply repace "migration" with "job" in some
statements.
* src/qemu/qemu_driver.c
`dump' watchdog action lets libvirtd to dump the guest when receives a
watchdog event (which probably means a guest crash)
Currently only qemu is supported.
When we get an EOF event on monitor connection, it may be a result of
either crash or graceful shutdown. QEMU which supports async events
(i.e., we are talking to it using JSON monitor) emits SHUTDOWN event on
graceful shutdown. In case we don't get this event by the time monitor
connection is closed, we assume the associated domain crashed.
Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request. In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed. With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.
This patch adds support for the drive_del() command and introduces it
in the disk removal paths. If the guest is running in a QEMU without this
command we currently explicitly check for unknown command/CommandNotFound
and log the issue.
If QEMU supports the command we issue the drive_del command after we attempt
to remove the device. The guest may respond and remove the block device
before we get to attempt to call drive_del. In that case, we explicitly check
for 'Device not found' from the monitor indicating that the target drive
was auto-deleted upon guest responds to the device removal notification.
1. http://thread.gmane.org/gmane.comp.emulators.qemu/84745
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request. In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed. With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.
This patch adds support for the drive_unplug() command and introduces it
in the disk removal paths. There is some discussion to be had about how
to handle the case where the guest is running in a QEMU without this
command (and the fact that we currently don't have a way of detecting
what monitor commands are available).
Changes since v2:
- use VIR_ERROR to report when unplug command not found
Changes since v1:
- return > 0 when command isn't present, < 0 on command failure
- detect when drive_unplug command isn't present and log error
instead of failing entire command
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
- qemudDomainAttachPciControllerDevice: Don't build "devstr"
if "-device" of qemu is not available, as "devstr" will only
be used by "qemuMonitorAddDevice", which depends on "-device"
argument of qemu is supported.
- "qemudDomainSaveImageOpen": Fix indent problem.
* src/qemu/qemu_driver.c
Two more calls to remote libvirtd have to be surrounded by
qemuDomainObjEnterRemoteWithDriver() and
qemuDomainObjExitRemoteWithDriver() to prevent possible deadlock between
two communicating libvirt daemons.
See commit f0c8e1cb37 for further details.
* src/qemu/qemu_conf.c (qemudExtractVersionInfo): Check for file
before executing it here, rather than in callers.
(qemudBuildCommandLine): Rewrite with virCommand.
* src/qemu/qemu_conf.h (qemudBuildCommandLine): Update signature.
* src/qemu/qemu_driver.c (qemuAssignPCIAddresses)
(qemudStartVMDaemon, qemuDomainXMLToNative): Adjust callers.
* src/qemu/qemu_driver.c (though MACROS QEMU_VNC_PORT_MAX, and
QEMU_VNC_PORT_MIN are defined at the beginning, numbers (65535, 5900)
are still used, replace them)
Use macvtap specific functions depending on WITH_MACVTAP.
Use #if instead of #ifdef to check for WITH_MACVTAP, because
WITH_MACVTAP is always defined with value 0 or 1.
Also export virVMOperationType{To|From}String unconditional,
because they are used unconditional in the domain config code.
When dumping a domain, it's reasonable to save dump-file in raw format
if dump format is misconfigured or the corresponding compress program
is not available rather then fail dumping.
This patch introduces the usage of the pre-associate state of the IEEE 802.1Qbg standard on incoming VM migration on the target host. It is in response to bugzilla entry 632750.
https://bugzilla.redhat.com/show_bug.cgi?id=632750
For being able to differentiate the exact reason as to why a macvtap device is being created, either due to a VM creation or an incoming VM migration, I needed to pass that reason as a parameter from wherever qemudStartVMDaemon is being called in order to determine whether to send an ASSOCIATE (VM creation) or a PRE-ASSOCIATE (incoming VM migration) towards lldpad.
I am also fixing a problem with the virsh domainxml-to-native call on the way.
Gerhard successfully tested the patch with a recent blade network 802.1Qbg-compliant switch.
The patch should not have any side-effects on the 802.1Qbh support in libvirt, but Roopa (cc'ed) may want to verify this.
When running non-root, the QEMU log file is usually opened with
truncation, since there is no logrotate for non-root usage.
This means that when libvirt logs the shutdown timestamp, the
log is accidentally truncated
* src/qemu/qemu_driver.c: Never truncate log file with shutdown
message
Do this by adding a helper function to get the persistent domain config. This
should be useful for other functions that may eventually want to alter
the persistent domain config (attach/detach device). Also make similar changes
to the test drivers setvcpus command.
A caveat is that the function will return the running config for a transient
domain, rather than error. This simplifies callers, as long as they use
other methods to ensure the guest is persistent.
Doing 'virsh setvcpus $vm --config 10' doesn't check the value against the
domains maxvcpus value. A larger value for example will prevent the guest
from starting.
Also make a similar change to the test driver.
The current semantics of non-persistent hotplug/update are confusing: the
changes will persist as long as the in memory domain definition isn't
overwritten. This means hotplug changes stay around until the domain is
redefined or libvirtd is restarted.
Call virDomainObjSetDefTransient at VM startup, so that we properly discard
hotplug changes when the VM is shutdown.
Similarly to deprecating close(), I am now deprecating fclose() and
introduce VIR_FORCE_FCLOSE() and VIR_FCLOSE(). Also, fdopen() is replaced with
VIR_FDOPEN().
Most of the files are opened in read-only mode, so usage of
VIR_FORCE_CLOSE() seemed appropriate. Others that are opened in write
mode already had the fclose()< 0 check and I converted those to
VIR_FCLOSE()< 0.
I did not find occurrences of possible double-closed files on the way.
Currently only support domain start and shutdown, for domain start,
record timestamp before the qemu command line, and for domain shutdown,
just say it's shutting down with timestamp.
* src/qemu/qemu_driver.c (qemudStartVMDaemon, qemudShutdownVMDaemon
introduced two macros - START_POSTFIX, SHUTDOWN_POSTFIX)
This provides an implementation of the virDomainOpenConsole
API with the QEMU driver. For the streams code, this reuses
most of the code previously added for the tunnelled migration
streams since it is generic.
* src/qemu/qemu_driver.c: Support virDomainOpenConsole
To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback
The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O
* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
src/libvirt_private.syms: Generic reusable FD based streams
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.
* src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in, src/driver.h: Define the
new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
API entry point
QEMU allows forcing a CDROM eject even if the guest has locked the device.
Expose this via a new UpdateDevice flag, VIR_DOMAIN_DEVICE_MODIFY_FORCE.
This has been requested for RHEV:
https://bugzilla.redhat.com/show_bug.cgi?id=626305
v2: Change flag name, bool cleanups
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
This extends the XML syntax for <graphics> to allow a password
expiry time to be set
eg
<graphics type='vnc' port='5900' autoport='yes' keymap='en-us' passwd='12345' passwdValidTo='2010-04-09T15:51:00'/>
The timestamp is in UTC.
* src/conf/domain_conf.h: Pull passwd out into separate struct
virDomainGraphicsAuthDef to allow sharing between VNC & SPICE
* src/conf/domain_conf.c: Add parsing/formatting of new passwdValidTo
argument
* src/opennebula/one_conf.c, src/qemu/qemu_conf.c, src/qemu/qemu_driver.c,
src/xen/xend_internal.c, src/xen/xm_internal.c: Update for changed
struct containing VNC password
In common with VNC, the QEMU driver configuration file is used
specify the host level TLS certificate location and a default
password / listen address
* src/qemu/qemu.conf: Add spice_listen, spice_tls,
spice_tls_x509_cert_dir & spice_password config params
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of
spice config parameters and updating -spice arg generation
to use them
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args,
tests/qemuxml2argvtest.c: Expand test case to cover driver
level configuration
Commit 06f81c63eb attempted to make
QEMU driver ignore the failure to relabel 'stdin_path' if it was
on NFS. The actual result was that it ignores *all* failures to
label any aspect of the VM, unless stdin_path is non-NULL and
is not on NFS.
* src/qemu/qemu_driver.c: Treat all relabel failures as terminal
Add dump_image_format[] to qemu.conf and support compressed dump
at virsh dump. coredump compression is important for saving disk space
in an environment where multiple guests run.
In general, "disk space for dump" is specially allocated and will be
a dead space in the system. It's used only at emergency. So, it's better
to have both of save_image_format and dump_image_format. "save" is done
in scheduled manner with enough calculated disk space for it.
This code reuses some of save_image_format[] and supports the same format.
Changelog:
- modified libvirtd_qemu.aug
- modified test_libvirtd_qemu.aug
- fixed error handling of qemudSaveCompressionTypeFromString()
When we mount any cgroup without "-o devices", we will fail to start vms:
error: Failed to start domain vm1
error: Unable to deny all devices for vm1: No such file or directory
When we mount any cgroup without "-o cpu", we will fail to get schedinfo:
Scheduler : posix
error: unable to get cpu shares tunable: No such file or directory
We should only use the cgroup controllers which are mounted on host.
So I add virCgroupMounted() for qemuCgroupControllerActive()
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
https://bugzilla.redhat.com/show_bug.cgi?id=638285 - when migrating
a guest, it was very easy to provoke a race where an application
could query block information on a VM that had just been migrated
away. Any time qemu code obtains a job lock, it must also check
that the VM was not taken down in the time where it was waiting
for the lock.
* src/qemu/qemu_driver.c (qemudDomainSetMemory)
(qemudDomainGetInfo, qemuDomainGetBlockInfo): Check that vm still
exists after obtaining job lock, before starting monitor action.
Add auditing of all initial disk/net assignments to QEMU guests
at startup. Add auditing for all hotplug & unplug events and
disk media changes.
* src/qemu/qemu_driver.c: Add disk/net resource auditing
Revert most of commit a8b5f9bd27.
The audit hooks will be re-added directly in the QEMU driver code
in a future commit
* daemon/remote.c: Remove all audit logging hooks
* src/qemu/qemu_driver.c: Remove all audit logging hooks
There is no point in trying to fill params beyond the first error,
because when qemuDomainGetMemoryParameters returns -1 then the caller
cannot detect which values in params are valid.
Most operations are audited at the libvirtd level; auditing in
src/libvirt.c would result in two audit entries per operation (one in
the client, one in libvirtd).
The only exception is a domain stopping of its own will (e.g. because
the user clicks on "shutdown" inside the interface). There can often be
no client connected at the time the domain stops, so libvirtd does not
have any virConnectPtr object on which to attach an event watch. This
patch therefore adds auditing directly inside the qemu driver (other
drivers are not supported).
Although this patch adds a distinction between maximum vcpus and
current vcpus in the XML, the values should be identical for all
drivers at this point. Only in subsequent per-driver patches will
a distinction be made.
In general, virDomainGetInfo should prefer the current vcpus.
* src/conf/domain_conf.h (_virDomainDef): Adjust vcpus to unsigned
short, to match virDomainGetInfo limit. Add maxvcpus member.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefFormat): parse and print out vcpu details.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Manage both vcpu numbers, and require them
to be equal for now.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* src/phyp/phyp_driver.c (phypDomainDumpXML): Likewise.
* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineXML)
(openvzDomainCreateXML, openvzDomainSetVcpusInternal): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxDomainDefineXML):
Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/esx/esx_vmx.c (esxVMX_ParseConfig, esxVMX_FormatConfig):
Likewise.
* src/qemu/qemu_conf.c (qemuBuildSmpArgStr)
(qemuParseCommandLineSmp, qemuParseCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/opennebula/one_conf.c (xmlOneTemplate): Likewise.
Note - this wrapping is completely mechanical; the old API will
function identically, since the new API validates that the exact
same flags are provided by the old API. On a per-driver basis,
it may make sense to have the old API pass a different set of flags,
but that should be done in the per-driver patch that implements
the full range of flag support in the new API.
* src/esx/esx_driver.c (esxDomainSetVcpus, escDomainGetMaxVpcus):
Move guts...
(esxDomainSetVcpusFlags, esxDomainGetVcpusFlags): ...to new
functions.
(esxDriver): Trivially support the new API.
* src/openvz/openvz_driver.c (openvzDomainSetVcpus)
(openvzDomainSetVcpusFlags, openvzDomainGetMaxVcpus)
(openvzDomainGetVcpusFlags, openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDomainSetCPU)
(phypDomainSetVcpusFlags, phypGetLparCPUMAX)
(phypDomainGetVcpusFlags, phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSetVcpus)
(qemudDomainSetVcpusFlags, qemudDomainGetMaxVcpus)
(qemudDomainGetVcpusFlags, qemuDriver): Likewise.
* src/test/test_driver.c (testSetVcpus, testDomainSetVcpusFlags)
(testDomainGetMaxVcpus, testDomainGetVcpusFlags, testDriver):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainSetVcpus)
(vboxDomainSetVcpusFlags, virDomainGetMaxVcpus)
(virDomainGetVcpusFlags, virDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSetVcpus)
(xenUnifiedDomainSetVcpusFlags, xenUnifiedDomainGetMaxVcpus)
(xenUnifiedDomainGetVcpusFlags, xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainSetVcpus)
(xenapiDomainSetVcpusFlags, xenapiDomainGetMaxVcpus)
(xenapiDomainGetVcpusFlags, xenapiDriver): Likewise.
(xenapiError): New helper macro.
Over root-squashing nfs, when virFileOperation() is called as uid==0,
it may fail with EACCES, but also with EPERM, due to
virFileOperationNoFork()'s failed attemp to chown a writable file.
qemudDomainSaveFlag() should expect this case, too.
qemudOpenAsUID is intended to open a file with the credentials of a
specified uid. Current implementation fails if the file is accessible to
one of uid's groups but not owned by uid.
This patch replaces the supplementary group list that the child process
inherited from libvirtd with the default group list of uid.
Explicitly raising a nice error in the case user tries to migrate a
guest with assigned host devices is much better than waiting for a
mysterious error with no clue for the reason.
This is from a bug report and conversation on IRC where Soren reported that while a filter update is occurring on one or more VMs (due to a rule having been edited for example), a deadlock can occur when a VM referencing a filter is started.
The problem is caused by the two locking sequences of
qemu driver, qemu domain, filter # for the VM start operation
filter, qemu_driver, qemu_domain # for the filter update operation
that obviously don't lock in the same order. The problem is the 2nd lock sequence. Here the qemu_driver lock is being grabbed in qemu_driver:qemudVMFilterRebuild()
The following solution is based on the idea of trying to re-arrange the 2nd sequence of locks as follows:
qemu_driver, filter, qemu_driver, qemu_domain
and making the qemu driver recursively lockable so that a second lock can occur, this would then lead to the following net-locking sequence
qemu_driver, filter, qemu_domain
where the 2nd qemu_driver lock has been ( logically ) eliminated.
The 2nd part of the idea is that the sequence of locks (filter, qemu_domain) and (qemu_domain, filter) becomes interchangeable if all code paths where filter AND qemu_domain are locked have a preceding qemu_domain lock that basically blocks their concurrent execution
So, the following code paths exist towards qemu_driver:qemudVMFilterRebuild where we now want to put a qemu_driver lock in front of the filter lock.
-> nwfilterUndefine() [ locks the filter ]
-> virNWFilterTestUnassignDef()
-> virNWFilterTriggerVMFilterRebuild()
-> qemudVMFilterRebuild()
-> nwfilterDefine()
-> virNWFilterPoolAssignDef() [ locks the filter ]
-> virNWFilterTriggerVMFilterRebuild()
-> qemudVMFilterRebuild()
-> nwfilterDriverReload()
-> virNWFilterPoolLoadAllConfigs()
->virNWFilterPoolObjLoad()
-> virNWFilterPoolAssignDef() [ locks the filter ]
-> virNWFilterTriggerVMFilterRebuild()
-> qemudVMFilterRebuild()
-> nwfilterDriverStartup()
-> virNWFilterPoolLoadAllConfigs()
->virNWFilterPoolObjLoad()
-> virNWFilterPoolAssignDef() [ locks the filter ]
-> virNWFilterTriggerVMFilterRebuild()
-> qemudVMFilterRebuild()
Qemu is not the only driver using the nwfilter driver, but also the UML driver calls into it. Therefore qemuVMFilterRebuild() can be exchanged with umlVMFilterRebuild() along with the driver lock of qemu_driver that can now be a uml_driver. Further, since UML and Qemu domains can be running on the same machine, the triggering of a rebuild of the filter can touch both types of drivers and their domains.
In the patch below I am now extending each nwfilter callback driver with functions for locking and unlocking the (VM) driver (UML, QEMU) and introduce new functions for locking all registered callback drivers and unlocking them. Then I am distributing the lock-all-cbdrivers/unlock-all-cbdrivers call into the above call paths. The last shown callpath starting with nwfilterDriverStart() is problematic since it is initialize before the Qemu and UML drives are and thus a lock in the path would result in a NULL pointer attempted to be locked -- the call to virNWFilterTriggerVMFilterRebuild() is never called, so we never lock either the qemu_driver or the uml_driver in that path. Therefore, only the first 3 paths now receive calls to lock and unlock all callback drivers. Now that the locks are distributed where it matters I can remove the qemu_driver and uml_driver lock from qemudVMFilterRebuild() and umlVMFilterRebuild() and not requiring the recursive locks.
For now I want to put this out as an RFC patch. I have tested it by 'stretching' the critical section after the define/undefine functions each lock the filter so I can (easily) concurrently execute another VM operation (suspend,start). That code is in this patch and if you want you can de-activate it. It seems to work ok and operations are being blocked while the update is being done.
I still also want to verify the other assumption above that locking filter and qemu_domain always has a preceding qemu_driver lock.
Adding parsing code for memory tunables in the domain xml file
also change the internal define structures used for domain memory
informations
Adds a new specific test
Public api to set/get memory tunables supported by the hypervisors.
dv:
* some cleanups in libvirt.c
* adding extra checks in libvirt.c new entry points
v4:
* Move exporting public API to this patch
* Add unsigned int flags to the public api for future extensions
v3:
* Add domainGetMemoryParamters and NULL in all the driver interface
v2:
* Initialize domainSetMemoryParameters to NULL in all the driver
interface structure.
Other drivers will need this same functionality, so move it to up to
conf/domain_conf.c and give it a more general name.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
The current version of the qemu managed save implementation
is subject to a race where the domain shuts down between
the time that we start the command and the time that we
actually try to do the save. Close this race by making
qemuDomainSaveFlags() expect both the driver and the passed-in
vm object to be locked before executing.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When reconnecting to existing VMs, we re-reserved only those PCI
addresses which were explicitly mentioned in domain XML. Since some
addresses are always reserved (e.g., 0:0:0 and 0:0:1), we need to handle
those too.
Also all this should only be done if device flag is supported by qemu.
In this patch I am extending and fixing the nwfilter module's reload support to stop all ongoing threads (for learning IP addresses of interfaces) and rebuild the filtering rules of all interfaces of all VMs when libvirt is started. Now libvirtd rebuilds the filters upon the SIGHUP signal and libvirtd restart.
About the patch: The nwfilter functions require a virConnectPtr. Therefore I am opening a connection in qemudStartup, which later on needs to be closed outside where the driver lock is held since otherwise it ends up in a deadlock due to virConnectClose() trying to lock the driver as well.
I have tested this now for a while with several machines running and needing the IP address learner thread(s). The rebuilding of the firewall rules seems to work fine following libvirtd restart or a SIGHUP. Also the termination of libvirtd worked fine.
Since the qemu process is running as qemu:qemu, it can't actually
look at the unix socket in /var/run/libvirt/qemu which is owned by
root and has permission 700. Move the unix socket to
/var/lib/libvirt/qemu, which is already owned by qemu:qemu.
Thanks to Justin Clift for test this out for me.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The problem is that on the source of the migration, libvirtd
is responsible for creating the unix socket over which the data
will flow. Since libvirtd is running as root, this file will
be created as root. When the qemu process running as qemu:qemu
goes to access the unix file to write data to it, it will get
permission denied and fail. Make sure to change the owner
of the unix file to qemu:qemu.
Thanks to Justin Clift for testing this patch out for me.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Basically a followup of the previous patch about balloon desactivation
if desactivated, to not ask for balloon information to qemu as we will
just get an error back.
This can make a huge difference in the time needed for domain
information or list when a machine is loaded, and balloon has been
desactivated in the guests.
* src/qemu/qemu_driver.c: do not get the balloon info if the balloon
suppor is disabled
device_del command is not synchronous for PCI devices, it merely asks
the guest to release the device and returns. If the host wants to use
that device before the guest actually releases it, we are in big
trouble. To avoid this, we already added a loop which waits up to 10
seconds until the device is actually released before we do anything else
with that device. But we only added this loop for managed PCI devices
before we try reattach them back to the host.
However, we need to wait even for non-managed devices. We don't reattach
them automatically, but we still want to prevent the host from using it.
This was revealed thanks to sVirt: when we relabel sysfs files
corresponding to the PCI device before the guest finished releasing the
device, qemu is no longer allowed to access those files and if it wants
(as a result of guest's request) to write anything to them, it just
exits, which kills the guest.
This is not a proper fix and needs some further work both on libvirt and
qemu side in the future.
If detecting the FLR flag of a pci device fails, then we
could run into the situation of trying to close a file
descriptor twice, once in pciInitDevice() and once in pciFreeDevice().
Fix that by removing the pciCloseConfig() in pciInitDevice() and
just letting pciFreeDevice() handle it.
Thanks to Chris Wright for pointing out this problem.
While we are at it, fix an error check. While it would actually
work as-is (since success returns 0), it's still more clear to
check for < 0 (as the rest of the code does).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
There is actually a difference between the character device type (serial,
parallel, channel, ...) and the target type (virtio, guestfwd). Currently
they are awkwardly conflated.
Start to pull them apart by renaming targetType -> deviceType. This is
an entirely mechanical change.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
When doing a PCI secondary bus reset, we must be sure that there are no
active devices on the same bus segment. The active device tracking is
designed to only track host devices that are active in use by guests.
This ignores host devices that are actively in use by the host. So the
current logic will reset host devices.
Switch this logic around and allow sbus reset when we are assigning all
devices behind a bridge to the same guest at guest startup or as a result
of a single attach-device command.
* src/util/pci.h: change signature of pciResetDevice to add an
inactive devices list
* src/qemu/qemu_driver.c src/xen/xen_driver.c: use (or not) the new
functionality of pciResetDevice() depending on the place of use
* src/util/pci.c: implement the interface and logic changes
- src/qemu/qemu_driver.c: Eliminate code duplication by using the new
helpers qemuPrepareHostdevPCIDevices and qemuDomainReAttachHostdevDevices.
This reduces the number of open coded calls to pciResetDevice.
- src/qemu/qemu_driver.c: These new helpers take hostdev list and count
directly rather than getting them indirectly from domain definition.
This will allow reuse for the attach-device case.
- src/qemu/qemu_driver.c: Update qemuGetPciHostDeviceList to take a
hostdev list and count directly, rather than getting this indirectly
from domain definition. This will allow reuse for the attach-device case.
Thanks to DV for knocking together the Relax-NG changes
quickly for me.
Changes since v1:
- Change the domain.rng to correspond to the new schema
- Don't allocate caps->ns in testQemuCapsInit since it is a static table
Changes since v2:
- Change domain.rng to add restrictions on allowed environment names
Changes since v3:
- Remove a bogus comment in the tests
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Implement the qemu driver's virDomainQemuMonitorCommand
and hook it into the API entry point.
Changes since v1:
- Rename the (external) qemuMonitorCommand to qemuDomainMonitorCommand
- Add virCheckFlags to qemuDomainMonitorCommand
Changes since v2:
- Drop ATTRIBUTE_UNUSED from the flags
Changes since v3:
- Add a flag to priv so we only print out monitor command warning once. Note
that this has not been plumbed into qemuDomainObjPrivateXMLFormat or
qemuDomainObjPrivateXMLParse, which means that if you run a monitor command,
restart libvirtd, and then run another monitor command, you may get an
an erroneous VIR_INFO. It's a pretty minor matter, and I didn't think it
warranted the additional code.
- Add BeginJob/EndJob calls around EnterMonitor/ExitMonitor
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Add the library entry point for the new virDomainQemuMonitorCommand()
entry point. Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.
Changes since v1:
- Go back to using the virDriver table for qemuDomainMonitorCommand, due to
linking issues
- Added versioning information to the libvirt-qemu.so
Changes since v2:
- None
Changes since v3:
- Add LGPL header to libvirt-qemu.c
- Make virLibConnError and virLibDomainError macros instead of function calls
Changes since v4:
- Move exported symbols to libvirt_qemu.syms
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Implement the qemu hooks for XML namespace data. This
allows us to specify a qemu XML namespace, and then
specify:
<qemu:commandline>
<qemu:arg value='arg'/>
<qemu:env name='name' value='value'/>
</qemu:commandline>
In the domain XML.
Changes since v1:
- Change the <qemu:arg>arg</qemu:arg> XML to <qemu:arg value='arg'/> XML
- Fix up some memory leaks in qemuDomainDefNamespaceParse
- Rename num_extra and extra to num_args and args, respectively
- Fixed up some error messages
- Make sure to escape user-provided data in qemuDomainDefNamespaceFormatXML
Changes since v2:
- Add checking to ensure environment variable names are valid
- Invert the logic in qemuDomainDefNamespaceFormatXML to return early
Changes since v3:
- Change strspn() to c_isalpha() check of first letter of environment variable
Signed-off-by: Chris Lalancette <clalance@redhat.com>
virFileOperation previously returned 0 on success, or the value of
errno on failure. Although there are other functions in libvirt that
use this convention, the preferred (and more common) convention is to
return 0 on success and -errno (or simply -1 in some cases) on
failure. This way the check for failure is always (ret < 0).
* src/util/util.c - change virFileOperation and virFileOperationNoFork to
return -errno on failure.
* src/storage/storage_backend.c, src/qemu/qemu_driver.c
- change the hook functions passed to virFileOperation to return
-errno on failure.
To allow compatibility with older QEMU PCI device slot assignment
it is necessary to explicitly track the balloon device in the
XML. This introduces a new device
<memballoon model='virtio|xen'/>
It can also have a PCI address, auto-assigned if necessary.
The memballoon will be automatically added to all Xen and QEMU
guests by default.
* docs/schemas/domain.rng: Add <memballoon> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
and formatting for memballoon device. Always add a memory
balloon device to Xen/QEMU if none exists in XML
* src/libvirt_private.syms: Export memballoon model APIs
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
PCI device address in memory balloon device
* tests/*: Update to test new functionality
The VIR_ERR_NO_SUPPORT refers to an API which is not implemented.
There is a separate VIR_ERR_CONFIG_UNSUPPORTED for XML config
options that are not available with the current hypervisor.
* src/qemu/qemu_conf.c, src/qemu/qemu_driver.c: Remove
many VIR_ERR_NO_SUPPORT replace with VIR_ERR_CONFIG_UNSUPPORTED
If you try to execute two concurrent migrations p2p
from A->B and B->A, the two libvirtd's will deadlock
trying to perform the migrations. The reason for this is
that in p2p migration, the libvirtd's are responsible for
making the RPC Prepare, Migrate, and Finish calls. However,
they are currently holding the driver lock while doing so,
which basically guarantees deadlock in this scenario.
This patch fixes the situation by adding
qemuDomainObjEnterRemoteWithDriver and
qemuDomainObjExitRemoteWithDriver helper methods. The Enter
take an additional object reference, then drops both the
domain object lock and the driver lock. The Exit takes
both the driver and domain object lock, then drops the
reference. Adding calls to these Enter and Exit helpers
around remote calls in the various migration methods
seems to fix the problem for me in testing.
This should make the situation safe. The additional domain
object reference ensures that the domain object won't disappear
while this operation is happening. The BeginJob that is called
inside of qemudDomainMigratePerform ensures that we can't execute a
second migrate (or shutdown, or save, etc) job while the
migration is active. Finally, the additional check on the state
of the vm after we reacquire the locks ensures that we can't
be surprised by an external event (domain crash, etc).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Record a default driver name/type in capabilities struct. Use this
when parsing disks if value is not set in XML config.
* src/conf/capabilities.h: Record default driver name/type for disks
* src/conf/domain_conf.c: Fallback to default driver name/type
when parsing disks
* src/qemu/qemu_driver.c: Set default driver name/type to raw
Disk format probing is now disabled by default. A new config
option in /etc/qemu/qemu.conf will re-enable it for existing
deployments where this causes trouble
The implementation of security driver callbacks often needs
to access the security driver object. Currently only a handful
of callbacks include the driver object as a parameter. Later
patches require this is many more places.
* src/qemu/qemu_driver.c: Pass in the security driver object
to all callbacks
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_stacked.c,
src/security/security_apparmor.c, src/security/security_driver.h,
src/security/security_selinux.c: Add a virSecurityDriverPtr
param to all security callbacks
Update the QEMU cgroups code, QEMU DAC security driver, SELinux
and AppArmour security drivers over to use the shared helper API
virDomainDiskDefForeachPath().
* src/qemu/qemu_driver.c, src/qemu/qemu_security_dac.c,
src/security/security_selinux.c, src/security/virt-aa-helper.c:
Convert over to use virDomainDiskDefForeachPath()
Require the disk image to be passed into virStorageFileGetMetadata.
If this is set to VIR_STORAGE_FILE_AUTO, then the format will be
resolved using probing. This makes it easier to control when
probing will be used
* src/qemu/qemu_driver.c, src/qemu/qemu_security_dac.c,
src/security/security_selinux.c, src/security/virt-aa-helper.c:
Set VIR_STORAGE_FILE_AUTO when calling virStorageFileGetMetadata.
* src/storage/storage_backend_fs.c: Probe for disk format before
calling virStorageFileGetMetadata.
* src/util/storage_file.h, src/util/storage_file.c: Remove format
from virStorageFileMeta struct & require it to be passed into
method.
* src/qemu/qemu_driver.c (qemuConnectMonitor): Correct erroneous
parenthesization in two expressions. Without this fix, failure
to set or clear SELinux security context in the monitor would go
undiagnosed. Also correct a diagnostic and split some long lines.
Make sure to *not* call qemuDomainPCIAddressReleaseAddr if
QEMUD_CMD_FLAG_DEVICE is *not* set (for older qemu). This
prevents a crash when trying to do device detachment from
a qemu guest.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
In the current libvirt PCI code, there is no checking whether
a PCI device is in use by a guest when doing node device
detach or reattach. This causes problems when a device is
assigned to a guest, and the administrator starts issuing
nodedevice commands. Make it so that we check the list
of active devices when trying to detach/reattach, and only
allow the operation if the device is not assigned to a guest.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
This code was just recently added (by me) and didn't account for the
fact that stdin_path is sometimes NULL. If it's NULL, and
SetSecurityAllLabel fails, a segfault would result.
When the saved domain image is on an NFS share, at least some part of
domainSetSecurityAllLabel will fail (for example, selinux labels can't
be modified). To allow domain restore to still work in this case, just
ignore the errors.
Also restore the label to its original value after qemu is finished
with the file.
Prior to this patch, qemu domain restore did not function properly if
selinux was set to enforce.
If an active migration operation fails, or is cancelled by the
admin, the QEMU on the destination is shutdown and the one on
the source continues running. It is important in shutting down
the QEMU on the destination, the security drivers don't reset
the file labelling/permissions.
* src/qemu/qemu_driver.c: Don't reset labelling/permissions
on migration abort
The patches for shared storage migration were not correctly written
for json mode. Thus the 'blk' and 'inc' parameters were never being
set. In addition they didn't set the QEMU_MONITOR_MIGRATE_BACKGROUND
so migration was synchronous. Due to multiple bugs in QEMU's JSON
impl this wasn't noticed because it treated the sync migration requst
as asynchronous anyway. Finally 'background' parameter was converted
to take arbitrary flags but not renamed, and not all uses were changed
to unsigned int.
* src/qemu/qemu_driver.c: Set QEMU_MONITOR_MIGRATE_BACKGROUND in
doNativeMigrate
* src/qemu/qemu_monitor_json.c: Process QEMU_MONITOR_MIGRATE_NON_SHARED_DISK
and QEMU_MONITOR_MIGRATE_NON_SHARED_INC flags
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.h, src/qemu/qemu_monitor_text.c,
src/qemu/qemu_monitor_text.h: change 'int background' to
'unsigned int flags' in migration APIs. Add logging of flags
parameter
During incoming migration the QEMU monitor is not able to be
used. The incoming migration code did not keep hold of the
job lock because migration is split across multiple API calls.
This meant that further monitor commands on the guest would
hang until migration finished with no timeout.
In this change the qemuDomainMigratePrepare method sets the
job flag just before it returns. The qemuDomainMigrateFinish
method checks for this job flag & clears it once done. This
prevents any use of the monitor between prepare+finish steps.
The qemuDomainGetJobInfo method is also updated to refresh
the job elapsed time. This means that virsh domjobinfo can
return time data during incoming migration
* src/qemu/qemu_driver.c: Keep a job active during incoming
migration. Refresh job elapsed time when returning job info
When configuring serial, parallel, console or channel devices
with a file, dev or pipe backend type, it is necessary to label
the file path in the security drivers. For char devices of type
file, it is neccessary to pre-create (touch) the file if it does
not already exist since QEMU won't be allowed todo so itself.
dev/pipe configs already require the admin to pre-create before
starting the guest.
* src/qemu/qemu_security_dac.c: set file ownership for character
devices
* src/security/security_selinux.c: Set file labeling for character
devices
* src/qemu/qemu_driver.c: Add character devices to cgroup ACL
The current code pattern requires that callers of qemuMonitorClose
check for the return value == 0, and if so, set priv->mon = NULL
and release the reference held on the associated virDomainObjPtr
The change d84bb6d6a3 violated that
requirement, meaning that priv->mon never gets set to NULL, and
a reference count is leaked on virDomainObjPtr.
This design was a bad one, so remove the need to check the return
valueof qemuMonitorClose(). Instead allow registration of a
callback that's invoked just when the last reference on qemuMonitorPtr
is released.
Finally there was a potential reference leak in qemuConnectMonitor
in the failure path.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a destroy
callback invoked from qemuMonitorFree
* src/qemu/qemu_driver.c: Use the destroy callback to release the
reference on virDomainObjPtr when the monitor is freed. Fix other
potential reference count leak in connecting to monitor
Before issuing monitor commands it is neccessary to check whether
the guest is still running. Most places use virDomainIsActive()
correctly, but a few relied on 'priv->mon != NULL'. In theory
these should be equivalent, but the release of the last reference
count on priv->mon can be delayed a small amount of time until
the event handler is finally deregistered. A further ref counting
bug also means that priv->mon might be never released. In such a
case, code could mistakenly issue a monitor command and wait for
a response that will never arrive, effectively leaving the QEMU
driver waiting on virCondWait() forever..
To protect against these possibilities, make sure all code uses
virDomainIsActive(), not 'priv->mon != NULL'
* src/qemu/qemu_driver.c: Replace 'priv->mon != NULL' with
calls to 'priv->mon != NULL'()
Following Daniel Berrange's multiple helpful suggestions for improving
this patch and introducing another driver interface, I now wrote the
below patch where the nwfilter driver registers the functions to
instantiate and teardown the nwfilters with a function in
conf/domain_nwfilter.c called virDomainConfNWFilterRegister. Previous
helper functions that were called from qemu_driver.c and qemu_conf.c
were move into conf/domain_nwfilter.h with slight renaming done for
consistency. Those functions now call the function expored by
domain_nwfilter.c, which in turn call the functions of the new driver
interface, if available.
If VM startup fails early enough (can't find a referenced USB device),
libvirtd will crash trying to clear the VNC port bit, since port = 0,
which overflows us out of the bitmap bounds.
Fix this by being more defensive in the bitmap operations, and only
clearing a previously set VNC port.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Followup to https://bugzilla.redhat.com/show_bug.cgi?id=599091,
commit 20206a4b, to reduce disk waste in padding.
* src/qemu/qemu_monitor.h (QEMU_MONITOR_MIGRATE_TO_FILE_BS): Drop
back to 4k.
(QEMU_MONITOR_MIGRATE_TO_FILE_TRANSFER_SIZE): New macro.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update comment.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrateToFile): Use
two invocations of dd to output non-aligned large blocks.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMigrateToFile):
Likewise.
Match earlier change for qemu pause support with virDomainCreateXML.
* src/qemu/qemu_driver.c (qemudDomainObjStart): Add parameter; all
callers changed.
(qemudDomainStartWithFlags): Implement flag support.
When a disk is on a root squashed NFS server, it may not be
possible to stat() the disk file in virCgroupAllowDevice.
The virStorageFileGetMeta method may also fail to extract
the parent backing store. Both of these errors have to be
ignored to avoid breaking NFS deployments
* src/qemu/qemu_driver.c: Ignore errors in cgroup setup to
keep root squash NFS happy
https://bugzilla.redhat.com/show_bug.cgi?id=589465
Some guests (eg with badly configured grub, or Windows' installation cd)
require quick response from the console user. That's why we have a
"launchPaused" option in vdsm.
To implement it via libvirt, we need to ask libvirt not to call
qemuMonitorStartCPUs() after starting qemu. Calling virDomainStop
immediately after the domain is up is inherently raceful.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Add new parameter;
all callers adjusted.
(qemudDomainCreate): Implement support for new flag.
When an attempt to hotplug a PCI device to a guest fails,
the device was left attached to pci-stub. It is neccessary
to reset the device and then attach it to the host driver
again.
* src/qemu/qemu_driver.c: Reattach PCI device to host if
hotadd fails
When SELinux is running in MLS mode, libvirtd will have a
different security level to the VMs. For libvirtd to be
able to connect to the monitor console, the client end of
the UNIX domain socket needs a different label. This adds
infrastructure to set the socket label via the security
driver framework
* src/qemu/qemu_driver.c: Call out to socket label APIs in
security driver
* src/qemu/qemu_security_stacked.c: Wire up socket label
drivers
* src/security/security_driver.h: Define security driver
entry points for socket labelling
* src/security/security_selinux.c: Set socket label based on
VM label
Adjust args to qemudStartVMDaemon() to also specify path to stdin_fd,
so this can be passed to the AppArmor driver via SetSecurityAllLabel().
This updates all calls to qemudStartVMDaemon() as well as setting up
the non-AppArmor security driver *SetSecurityAllLabel() declarations
for the above. This is required for the following
"apparmor-fix-save-restore" patch since AppArmor resolves the passed
file descriptor to the pathname given to open().
See https://bugzilla.redhat.com/show_bug.cgi?id=599091
Saving a paused 512MB domain took 3m47s with the old block size of 512
bytes. Changing the block size to 1024*1024 decreased the time to 56
seconds. (Doubling again to 2048*1024 yielded 0 improvement; lowering
to 512k increased the save time to 1m10s, about 20%)
The pointer to the xml describing the domain is saved into an object
prior to calling VIR_REALLOC_N() to make the size of the memory it
points to a multiple of QEMU_MONITOR_MIGRATE_TO_FILE_BS. If that
operation needs to allocate new memory, the pointer that was saved is
no longer valid.
To avoid this situation, adjust the size *before* saving the pointer.
(This showed up when experimenting with very large values of
QEMU_MONITOR_MIGRATE_TO_FILE_BS).
This patch that adds support for configuring 802.1Qbg and 802.1Qbh
switches. The 802.1Qbh part has been successfully tested with real
hardware. The 802.1Qbg part has only been tested with a (dummy)
server that 'behaves' similarly to how we expect lldpad to 'behave'.
The following changes were made during the development of this patch:
- Merging Scott's v13-pre1 patch
- Fixing endptr related bug while using virStrToLong_ui() pointed out
by Jim Meyering
- Addressing Jim Meyering's comments to v11
- requiring mac address to the vpDisassociateProfileId() function to
pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched)
- determining pid of lldpad daemon by reading it from /var/run/libvirt.pid
(hardcode as is hardcode alson in lldpad sources)
- merging netlink send code for kernel target and user space target
(lldpad) using one function nlComm() to send the messages
- adding a select() after the sending and before the reading of the
netlink response in case lldpad doesn't respond and so we don't hang
- when reading the port status, in case of 802.1Qbg, no status may be
received while things are 'in progress' and only at the end a status
will be there.
- when reading the port status, use the given instanceId and vf to pick
the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS.
- never sending nor parsing IFLA_PORT_SELF type of messages in the
802.1Qbg case
- iterating over the elements in a IFLA_VF_PORTS to pick the right
IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId
(802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg)
and reading the current status in IFLA_PORT_RESPONSE.
- recycling a previous patch that adds functionality to interface.c to
- get the vlan identifier on an interface
- get the flags of an interface and some convenience function to
check whether an interface is 'up' or not (not currently used here)
- adding function to determine the root physical interface of an
interface. For example if a macvtap is linked to eth0.100, it will
find eth0. Also adding a function that finds the vlan on the 'way to
the root physical interface'
- conveying the root physical interface name and index in case of 802.1Qbg
- conveying mac address of macvlan device and vlan identifier in
IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ]
to (future) lldpad via netlink
- To enable build with --without-macvtap rename the
[dis|]associatePortProfileId functions, prepend 'vp' before their
name and make them non-static functions.
- Renaming variable multicast to nltarget_kernel and inverting
the logic
- Addressing Jim Meyering's comments; this also touches existing
code for example for correcting indentation of break statements or
simplification of switch statements.
- Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses
- 802.1Qbg part prepared for sending a RTM_SETLINK and getting
processing status back plus a subsequent RTM_GETLINK to
get IFLA_PORT_RESPONSE.
Note: This interface for 802.1Qbg may still change
- [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid
compiler
warning when latest if_link.h isn't available
- move from Stefan's 802.1Qb{g|h} XML v8 to v9
- move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh
- remove debug fprintfs
- use virGetHostUUID (thanks Stefan!)
- fix compile issue when latest if_link.h isn't available
- change poll timeout to 10s, at 1/8 intervals
- if polling times out, log msg and return -ETIMEDOUT
- Add Stefan's code for getPortProfileStatus
- Poll for up to 2 secs for port-profile status, at 1/8 sec intervals:
- if status indicates error, abort openMacvtapTap
- if status indicates success, exit polling
- if status is "in-progress" after 2 secs of polling, exit
polling loop silently, without error
My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete.
I've tested using the recent kernel updates for VF_PORT netlink msgs and
enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several
direct interfaces, each configured with a port-profile per the XML. VM-to-VM,
and VM-to-external work as expected. VM-to-VM on same host (using same NIC)
works same as VM-to-VM where VMs are on diff hosts. I'm able to change
settings on the port-profile while the VM is running to change the virtual
port behaviour. For example, adjusting a QoS setting like rate limit. All
VMs with interfaces using that port-profile immediatly see the effect of the
change to the port-profile.
I don't have a SR-IOV device to test so source dev is a non-SR-IOV device,
but most of the code paths include support for specifing the source dev and
VF index. We'll need to complete this by discovering the PF given the VF
linkdev. Once we have the PF, we'll also have the VF index. All this info-
mation is available from sysfs.
Since the macvtap device needs active tear-down and the teardown logic
is based on the interface name, it can happen that if for example 1 out
of 3 interfaces was successfully created, that during the failure path
the macvtap's target device name is used to tear down an interface that
is doesn't own (owned by another VM).
So, in this patch, the target interface name is reset so that there is
no target interface name and the interface name is always cleared after
a tear down.
The hotplug methods still had the qemuCmdFlags variable declared
as an int, instead of unsigned long long. This caused flag checks
to be incorrect for flags > 31
* src/qemu/qemu_driver.c: Fix integer overflow in hotplug
This allows libvirt to open the PCI device sysfs config file prior
to dropping privileges so qemu can access the full config space.
Without this, a de-privileged qemu can only access the first 64
bytes of config space.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Detect support
for pci-assign.configfd option. Use this option when formatting
PCI device string if possible
* src/qemu/qemu_driver.c: Pre-open PCI sysfs config file and pass
to QEMU
We've been running into a lot of situations where
virGetHostname() is returning "localhost", where a plain
gethostname() would have returned the correct thing. This
is because virGetHostname() is *always* trying to canonicalize
the name returned from gethostname(), even when it doesn't
have to.
This patch changes virGetHostname so that if the value returned
from gethostname() is already FQDN or localhost, it returns
that string directly. If the value returned from gethostname()
is a shortened hostname, then we try to canonicalize it. If
that succeeds, we returned the canonicalized hostname. If
that fails, and/or returns "localhost", then we just return
the original string we got from gethostname() and hope for
the best.
Note that after this patch it is up to clients to check whether
"localhost" is an allowed return value. The only place
where it's currently not is in qemu migration.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().
<interface type='direct'>
<source dev='eth0.100' mode='vepa'/>
<model type='virtio'/>
<virtualport type='802.1Qbg'>
<parameters managerid='12' typeid='0x123456' typeidversion='1'
instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
</virtualport>
<filterref filter='clean-traffic'/>
</interface>
<interface type='direct'>
<source dev='eth0.100' mode='vepa'/>
<model type='virtio'/>
<virtualport type='802.1Qbh'>
<parameters profileid='my_profile'/>
</virtualport>
</interface>
I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.
Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
- removing macvtap.h's dependency on domain_conf.h by
moving the virVirtualPortProfileDef structure into macvtap.h
and not passing virtDomainNetDefPtr to any functions in
macvtap.c
- Addressed most of Chris Wright's comments:
- indicating error in case virtualport XML node cannot be parsed
properly
- parsing hex and decimal numbers using virStrToLong_ui() with
parameter '0' for base
- tgifname (target interface name) variable wasn't necessary
to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
file for subsequent patches to easier make them generally available
for export
- passing the macvtap interface name rather than the link device since
this otherwise gives funny side effects when using netlink messages
where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
we wanted to use hook scripts for the setup and so the setup doesn't fail
here.
- if instance ID UUID is not supplied it will automatically be generated
- adapted schema to make instance ID UUID optional
- added test case
- parser and XML generator have been separated into their own
functions so they can be re-used elsewhere (passthrough case
for example)
- Adapted XML parser and generator support the above shown type
(802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
necessary to use (for SR-IOV)
Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file
* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
new host_uuid config option to test
The cgroups ACL code was only allowing the primary disk image.
It is possible to chain images together, so we need to search
for backing stores and add them to the ACL too. Since the ACL
only handles block devices, we ignore the EINVAL we get from
plain files. In addition it was missing code to teardown the
cgroup when hot-unplugging a disk
* src/qemu/qemu_driver.c: Allow backing stores in cgroup ACLs
and add missing teardown code in unplug path
Basic live migration was broken by the commit that added
non-shared block support in two ways:
1) It added a virCheckFlags() to doNativeMigrate(). Besides
the fact that typical usage of virCheckFlags() is in driver
entry points, and doNativeMigrate() is not an entry point,
it was missing important flags like VIR_MIGRATE_LIVE. Move
the virCheckFlags to the top-level qemuDomainMigratePrepare2
and friends.
2) It also added a memory leak in qemuMonitorTextMigrate()
by not freeing the memory used by virBufferContentAndReset().
This is fixed by storing the pointer in a temporary variable
and freeing it at the end.
With this patch in place, normal live migration works again.
v3: Instead of the churn for virCheckFlagsUI and UL, instead
always promote flags to an unsigned long and always use %lx
for the fprintf.
v2: Add back flags check, which required adding virCheckFlagsUI
and virCheckFlagsUL
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The device path doesn't make use of guestAddr, so the memcpy corrupts
the guest info struct.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The virDomainGetBlockInfo API allows query physical block
extent and allocated block extent. These are normally the
same value unless storing a special format like qcow2
inside a block device. In this scenario we can query QEMU
to get the actual allocated extent.
Since last time:
- Return fatal error in text monitor
- Only invoke monitor command for block devices
- Fix error handling JSON code
* src/qemu/qemu_driver.c: Fill in block aloction extent when VM
is running
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
API to query the highest block extent via info blockstats
The qemu driver contains a subtle race in the logic to find next
available vnc port. Currently it iterates through all available ports
and returns the first for which bind(2) succeeds. However it is possible
that a previously issued port has not yet been bound by qemu, resulting
in the same port used for a subsequent domain.
This patch addresses the race by using a simple bitmap to "reserve" the
ports allocated by libvirt.
V2:
- Put port bitmap in struct qemud_driver
- Initialize bitmap in qemudStartup
V3:
- Check for failure of virBitmapGetBit
- Additional check for port != -1 before calling virbitmapClearBit
V4:
- Check for failure of virBitmap{Set,Clear}Bit
We need a common internal function for starting managed domains to be
used during autostart. This patch factors out relevant code from
qemudDomainStart into qemudDomainObjStart and makes it use the
refactored code for domain restore instead of calling qemudDomainRestore
API directly.
We need to be able to restore a domain which we already locked and
started a job for it without undoing these steps. This patch factors
out internals of qemudDomainRestore into separate functions which work
for locked objects.
The current cleanup: in StartVMDaemon path is a poor duplication.
qemuShutdownVMDaemon can handle teardown for inactive VMs, so let's use it.
v2: Remove old abort: label, only use cleanup:
There doesn't seem to be anything specific to tap devices for this
array of file descriptors which need to stay open of the guest to use.
Rename then for others to make use of.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Do not require each caller of virStorageFileGetMetadata and
virStorageFileGetMetadataFromFD to first clear the storage of the
"meta" buffer. Instead, initialize that storage in
virStorageFileGetMetadataFromFD.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Clear
"meta" here, not before each of the following callers.
* src/qemu/qemu_driver.c (qemuSetupDiskCgroup): Don't clear "meta" here.
(qemuTeardownDiskCgroup): Likewise.
* src/qemu/qemu_security_dac.c (qemuSecurityDACSetSecurityImageLabel):
Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityImageLabel):
Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
Approximately 60 messages were marked. Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052
Run this command:
git grep -l VIR_WARN|xargs perl -pi -e \
's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'
