Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
method for populating disk controllers, and call it after
parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
data to all data files which don't have it already
It is perfectly acceptable to have multiple sound devices of
same type in guest configuration. If the underlying hypervisor
does not like this, it is its job to complain, not the XML
parser's
* src/conf/domain_conf.c: Remove hack which deleted duplicated
sound device models.
* tests/xml2sexprdata/xml2sexpr-fv-sound.xml: Remove duplicate
models
The latter is not officially "wrong", but *is* terribly anachronistic.
I think automake documentation or comments call that syntax obsolescent.
* cfg.mk (_makefile_at_at_check_exceptions): Exempt @SCHEMADIR@
and @SYSCONFDIR@ uses -- there are no Makefile variables for those.
* docs/Makefile.am: Use $(INSTALL), not @INSTALL@.
* examples/dominfo/Makefile.am: Similar.
* examples/domsuspend/Makefile.am: Similar.
* proxy/Makefile.am: Similar.
* python/Makefile.am: Similar.
* python/tests/Makefile.am: Similar.
* src/Makefile.am: Similar.
* tests/Makefile.am: Similar.
* src/conf/domain_conf.c: add defaults for the video device
* src/esx/esx_vmx.[ch]: add VNC support to the VMX handling
* tests/vmx2xmltest.c, tests/xml2vmxtest.c: add tests for the VNC support
The current code for using -drive simply sets the -drive 'index'
parameter. QEMU internally converts this to bus/unit depending
on the type of drive. This does not give us precise control over
the bus/unit assignment though. This change switches over to make
libvirt explicitly calculate the bus/unit number.
In addition bus/unit/index are actually irrelevant for VirtIO
disks, since each virtio disk is a separate PCI device. No disk
controller is involved.
Doing the conversion to bus/unit in libvirt allows us to correctly
attach SCSI controllers when required.
* src/qemu/qemu_conf.c: Specify bus/unit instead of index for
disks
* tests/qemuxml2argvdata/qemuxml2argv-disk*.args: Switch over from
using index=NNNN, to bus=NN, unit=NN for SCSI/IDE/Floppy disks
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
to all XML files
Only print out '.' for each test case, full test output can be
re-enabled with VIR_TEST_VERBOSE=1, or VIR_TEST_DEBUG=XXXX
Sample output now looks like
TEST: statstest
........................................ 40
................................... 75 OK
PASS: statstest
TEST: qparamtest
................................ 32 OK
PASS: qparamtest
TEST:
............ 12 OK
The MAC addresses with 00:50:56 prefix are split into several ranges:
00:50:56:00:00:00 - 00:50:56:3f:ff:ff 'static' range (manually assigned)
00:50:56:80:00:00 - 00:50:56:bf:ff:ff 'vpx' range (assigned by a VI Client)
Erroneously the 'vpx' range was assumed to be larger and to occupy the
remaining addresses of the 00:50:56 prefix that are not part of the 'static'
range.
00:50:56 was used as prefix for generated MAC addresses, this is not possible
anymore, because there are gaps in the allowed ranges. Therefore, change the
prefix to 00:0c:29 which is the prefix for auto generated MAC addresses anyway.
Allow arbitrary MAC addresses to be used and set the checkMACAddress VMX option
to false in case the MAC address doesn't fall into any predefined range.
* docs/drvesx.html.in: update website accordingly
* src/esx/esx_driver.c: set the auto generation prefix to 00:0c:29
* src/esx/esx_vmx.c: fix MAC address range handling and allow arbitrary MAC
addresses
* tests/vmx2xml*, tests/xml2vmx*: add some basic MAC address range tests
The behavior for the qemu balloon device has changed. Formerly, a virtio
balloon device was provided by default. Now, '-balloon virtio' must be
specified on the command line to enable it. This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection
tests/virt-aa-helper-test and examples/apparmor are not included in
official tarballs, but should be. Attached is a patch to fix that
which works when apparmor is and is not available.
Change -monitor, -serial and -parallel output to use -chardev if it is
available.
* src/qemu/qemu_conf.c: Update qemudBuildCommandLine to use -chardev where
available.
* tests/qemuxml2argvtest.c tests/qemuxml2argvdata/: Add -chardev equivalents
for all current serial and parallel tests.
Initial support for the new QEMU monitor protocol using JSON
as the data encoding format instead of plain text
* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
esxVMX_IndexToDiskName handles indices up to 701. This limit comes
from a mapping gap in virDiskNameToIndex:
sdzy -> 700
sdzz -> 701
sdaaa -> 728
sdaab -> 729
This line in virDiskNameToIndex causes this gap:
idx = (idx + i) * 26;
Fixing it by altering this line to:
idx = (idx + (i < 1 ? 0 : 1)) * 26;
Also add a new version of virIndexToDiskName that handles the inverse
mapping for arbitrary indices.
* src/esx/esx_vmx.[ch]: remove esxVMX_IndexToDiskName
* src/util/util.[ch]: add virIndexToDiskName and fix mapping gap
* tests/esxutilstest.c: update test to verify that the gap is fixed
Introduce a new type="dir" mode for <disks> that allows use of
QEMU's virtual FAT block device driver. eg
<disk type='dir' device='floppy'>
<source dir='/tmp/test'/>
<target dev='fda' bus='fdc'/>
<readonly/>
</disk>
gets turned into
-drive file=fat:floppy:/tmp/test,if=floppy,index=0
Only read-only disks are supported with virtual FAT mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
disk args
* src/security/security_selinux.c: Temporarily skip labelling
of directory based disks
Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.
* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
and qemu-kvm-0.11.0-rc2 regression tests
VMware uses two MAC address prefixes: 00:0c:29 and 00:50:56. The 00:0c:29
prefix is used for ESX server generated addresses. The 00:50:56 prefix is
split into two parts. MAC addresses above 00:50:56:3f:ff:ff are generated
by a vCenter. The rest of the 00:50:56 prefix can be assigned manually.
Any MAC address within the 00:0c:29 and 00:50:56 prefix can be specified
in a domain XML config and the driver will handle the details internally.
* src/esx/esx_vmx.c: fix MAC address formatting
* tests/xml2vmxdata/*: update test files accordingly
* src/security/virt-aa-helper.c: get_definition() now calls the new
caps_mockup() function which will parse the XML for os.type,
os.type.arch and then sets the wordsize. These attributes are needed
only to get a valid virCapsPtr for virDomainDefParseString(). The -H
and -b options are now removed from virt-aa-helper (they weren't used
yet anyway).
* tests/virt-aa-helper-test: extend and fixes tests, chmod'ed 755
allows the following to be specified in a domain:
<channel type='pipe'>
<source path='/tmp/guestfwd'/>
<target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>
* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
schemas and the parsing/serialization side for the new construct
QEmu support will add the following on the qemu command line:
-chardev pipe,id=channel0,path=/tmp/guestfwd
-net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0
* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
- Don't duplicate SystemError
- Use proper error code in domain_conf
- Fix a broken error call in qemu_conf
- Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this
* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.
This can be used to forward the BOOTP settings of the host down to the
guest. This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.
* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
tests/networkxml2xmlout/netboot-proxy-network.xml
tests/networkxml2xmltest.c: add new tests
Provide a simple interface for other tests to lookup the testDebug variable.
Also remove a redundant error message in interface tests.
If anyone feels inclined to change this env variable to match the existing
LIBVIRT_* format, it should now be easier to do so.
If one has e.g.
<guest>
<os_type>hvm</os_type>
<arch name='x86_64'>
<wordsize>64</wordsize>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<machine>pc-0.11</machine>
<machine canonical='pc-0.11'>pc</machine>
<machine>pc-0.10</machine>
<machine>isapc</machine>
<domain type='qemu'>
</domain>
<domain type='kvm'>
<emulator>/usr/bin/kvm</emulator>
<machine>pc</machine>
<machine>isapc</machine>
</domain>
</arch>
</guest>
and start a guest with:
<domain type='kvm'>
...
<os>
<type arch='x86_64'>hvm</type>
...
</os>
</domain>
then the default machine type should be 'pc' and not 'pc-0.11'
Issue was reported by Anton Protopopov.
* src/capabilities.[ch]: pass the domain type to
virCapabilitiesDefaultGuestArch() and use it to look up the default
machine type from a specific guest domain if needed.
* src/conf/domain_conf.c, src/xen/xm_internal.c: update
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.xml: update
the domain type to 'kvm' and remove the machine type to check
that the default gets looked up correctly
* configure.in: look for AppArmor and devel
* src/security/security_apparmor.[ch] src/security/security_driver.c
src/Makefile.am: add and plug the new driver
* src/security/virt-aa-helper.c: new binary which is used exclusively by
the AppArmor security driver to manipulate AppArmor.
* po/POTFILES.in: registers the new files
* tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test:
tests for virt-aa-helper and the security driver, secaatest.c is
identical to seclabeltest.c except it initializes the 'apparmor'
driver instead of 'selinux'
While running make check, I noticed that it was actually using
the virsh binary from my system, in /usr/bin/virsh, and not the
one that was just compiled. This is actually caused by a bug
in Makefile.am, where we didn't update the PATH to include tools.
While here, I also updated all of the scripts to properly define
the srcdir, abs_top_srcdir, and abs_top_builddir environment
variables. This is required if you want to be able to run the
tests standalone (i.e. ./test instead of from make check). I've
tested this on both RHEL-5 and Fedora-10 machines, and make check
works on both, as does running the individual tests by hand.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
A given domain XML gets converted to a VMX config, uploaded to the host
and registered as new virtual machine.
* src/esx/esx_driver.c: refactor datastore related path parsing into
esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_util.[ch]: add esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_vi.[ch]: add esxVI_Context_UploadFile(), add datastores to
the traversal in esxVI_BuildFullTraversalSpecList(), add
esxVI_LookupDatastoreByName()
* src/esx/esx_vi_methods.[ch]: add esxVI_RegisterVM_Task()
* src/esx/esx_vi_types.c: make some error message more verbose
* src/esx/esx_vmx.[ch]: add esxVMX_AbsolutePathToDatastoreRelatedPath()
to convert a path into a datastore related path, add esxVMX_ParseFileName()
to convert from VMX path format to domain XML path format, extend the other
parsing function to be datastore aware, add esxVMX_FormatFileName() to
convert from domain XML path format to VMX path format, fix VMX ethernet
entry formating
* tests/esxutilstest.c: add test for esxUtil_ParseDatastoreRelatedPath()
* tests/vmx2xmldata/*: update domain XML files to use datastore related paths
* tests/xml2vmxdata/*: update domain XML files to use datastore related paths,
update VMX files to use absolute paths
* tests/.gitignore: ignore new test binaries
* tests/Makefile.am: add new tests
* tests/esxutilstest.c: test esxVMX_IndexToDiskName()
* tests/vmx2xmldata/*: config files for the VMX to domain XML test
* tests/vmx2xmltest.c: test the VMX to domain XML mapping
* tests/xml2vmxdata/*: config files for the domain XML to VMX test
* tests/xml2vmxtest.c: test the domain XML to VMX mapping
Currently, libvirtd will start a dnsmasq process for the virtual
network, but (aside from killing the dnsmasq process and replacing it),
there's no way to define tftp boot options.
This change introduces the appropriate tags to the dhcp configuration:
<network>
<name>default</name>
<bridge name="virbr%d" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<tftp root="/var/lib/tftproot" />
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
<bootp file="pxeboot.img"/>
</dhcp>
</ip>
</network>
When the attributes are present, these are passed to the
arguments to dnsmasq:
dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
from <tftp /> from <bootp />
At present, only local tftp servers are supported (ie, dnsmasq runs as
the tftp server), but we could improve this in future by adding a
server= attribute.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2009-09-21 Paolo Bonzini <pbonzini@redhat.com>
Jeremy Kerr <jk@ozlabs.org>
* docs/formatnetwork.html.in: Document new tags.
* docs/formatnetwork.html: Regenerate.
* docs/schemas/network.rng: Update.
* src/network_conf.c (virNetworkDefFree): Free new fields.
(virNetworkDHCPRangeDefParseXML): Parse <bootp>.
(virNetworkIPParseXML): New, parsing <dhcp> and <tftp>.
(virNetworkDefParseXML): Use virNetworkIPParseXML instead of
virNetworkDHCPRangeDefParseXML.
(virNetworkDefFormat): Pretty print new fields.
* src/network_conf.h (struct _virNetworkDef): Add netboot fields.
* src/network_driver.c (networkBuildDnsmasqArgv): Add
TFTP and BOOTP arguments.
* tests/Makefile.am (EXTRA_DIST): Add networkschemadata.
* tests/networkschematest: Look in networkschemadata.
* tests/networkschemadata/netboot-network.xml: New.
Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen
* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
-domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
-boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params
* docs/storage/: Move to examples/xml/storage/
* docs/test*.xml: Move to examples/xml/test/
* docs/Makefile.am: Remove example XML files from dist
* Makefile.am: Add examples/xml to EXTRA_DIST
* tests/virshtest.c: Update for moved test XML
* libvirt.spec.in: Include example XML files as docs
* tests/int-overflow: UPdate for moved XML
* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
src/domain_conf.h, src/domain_event.c, src/domain_event.h,
src/interface_conf.c, src/interface_conf.h,
src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
and SELINUX_CFLAGS from global INCLUDES and only have them in build
targets which actually need them. Create a libvirt_conf.la
convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h
* daemon/default-network.xml: Move to src/network/default.xml
* daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move
to src/qemu/
* src/qemu.conf: Move to src/qemu/qemu.conf
* daemon/Makefile.am: Remove rules for default-nmetwork.xml and
libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in
uninstall-local that would install polkit again.
* src/Makefile.am: Add rules for installing network/default.xml
and the qemu/*.aug files. Add test case for QEMU augeas files.
Add uninstall-local rule for files/directories created during
install. Rename install-exec-local to install-data-local.
Only install qemu.conf if WITH_QEMU is set.
* tests/networkschematest: Update for XML location move
Move the virsh tool and its man page into the tools directory
* Makefile.am: Remove rules for virsh.1 man page
* virsh.1: Remove auto-generated file
* docs/Makefile.am: Remove rules for virsh.pod man page
* docs/virsh.pod: Move to tools/ directory
* src/Makefile.am, src/.gitignore: Remove rules for virsh
* src/console.c, src/console.h, src/*.ico, src/virsh_win_icon.rc,
src/virsh.c: Move into tools/ directory
* tools/Makefile.am: Add rules for building virsh
* tools/.gitignore: Ignore virsh built files
* tests/virshtest.c, tests/int-overflow: Update for new
virsh location
Fix all thread locking bugs reported by object-locking test
case.
NB, some of the driver locking is getting too coarse. Driver
mutexes really need to be turned into RW locks instead to
significantly increase concurrency.
* src/lxc_driver.c: Fix useof driver when unlocked in the methods
lxcDomainGetInfo, lxcSetSchedulerParameters, and
lxcGetSchedulerParameters
* src/opennebula/one_driver.c: Fix missing unlock in oneDomainUndefine.
Fix use of driver when unlocked in oneDomainGetInfo,
oneGetOSType, oneDomainShutdown
* src/qemu_driver.c: Fix use of driver when unlocked in
qemudDomainSavem, qemuGetSchedulerType, qemuSetSchedulerParameters
and qemuGetSchedulerParameters
* src/storage_driver.c: Re-work storagePoolCreate to avoid bogus
lock checking warning. Re-work storageVolumeCreateXMLFrom to
remove a potential NULL de-reference & avoid bogus lock check
warnings
* src/test.c: Remove testDomainAssignDef since it break lock chekc
warnings.
* tests/object-locking.ml: Add oneDriverLock, oneDriverUnlock
and one_driver_t methods/types to allow lock checking on the
OpenNebula drivers
* tests/testutilsqemu.c: add a machine types list for /usr/bin/kvm
which doesn't have any aliases, while the guest has aliases
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.*,
tests/qemuxml2argvtest.c: add a test using /usr/bin/kvm and make
sure that 'pc' machine type doesn't get canonicalized using the
aliases in the guest machine type list
* tests/testutilsqemu.c: make 'pc' an alias for qemu-system-x86_64
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases1.*,
tests/qemuxml2argvtest.c: add a test which uses qemu-system-x86_64
and make sure the machine type is canonicalized.
This doesn't have any affect on the current tests because we don't have
any machine aliases in the current test data.
* src/qemu_conf.h, src/qemu_driver.c: expose qemudCanonicalizeMachine()
for the tests
* tests/qemuxml2argvtest.c: canonicalize the machine type
Things added include
- x86_64 host
- Migration features
- NUMA topology
- Security model
- Canonical machine types
- Domain machine types
- An arm guest
- More machine types for mips, mipsel, sparc and ppc
- An x86_64 xenner guest
This file was generated on a Fedora 12 machine using latest libvirt
and qemu-kvm-0.11.0-rc2
* tests/capabilityschemadata/caps-qemu-kvm.xml: add more features
to test
If a file descriptor with events=0 was added to the libvirtd
event loop, it would still be added to the poll() fds' array.
While it wouldn't see any POLLIN/OUT events, it'd still get
triggered for HANGUP/ERROR events which was not in compliance
with the libvirt events API contract.
* qemud/event.c: Don't poll on FDs with events=0
* tests/eventtest.c: Add test case to validate fix to event.c
* docs/schemas/domain.rng: Add <serial> element to disks
* src/domain_conf.h, src/domain_conf.c: XML parsing and
formatting for disk serial numbers
* src/qemu_conf.c: Set serial number when launching guests
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.xml: Add
serial number to XML test
Add option to domain XML for
<memoryBacking>
<hugepages/>
</memoryBacking>
* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
and pass it when hugepages are requested.
Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
hugepage tests
* tests/testutils.c: Run test function twice, once to prime it for
static allocations, once to count the non-static allocations.
* tests/testutilsqemu.c: Initialize variable correctl
* src/capabilities.c: Don't free machines variable upon failure
since caller must do that
* src/xm_internal.c: Add missing check for OOM in building VIF
config param
Calling qsort() on the disks array causes disk to be
unneccessarily re-ordered, potentially breaking the
ability to boot if the boot disk gets moved later in
the list. The new algorithm will insert a new disk as
far to the end of the list as possible, while being
ordered correctly wrt other disks on the same bus.
* src/domain_conf.c, src/domain_conf.h: Remove disk sorting
routines. Add API to insert a disk into existing list at
the optimal position, without resorting disks
* src/libvirt_private.syms: Export virDomainDiskInsert
* src/xend_internal.c, src/xm_internal.c: Remove calls to
qsort, use virDomainDiskInsert instead.
* src/qemu_driver.c: Remove calls to qsort, use virDoaminDiskInsert
instead. Fix reordering bugs when hotunplugging disks and
networks. Fix memory leak in disk/net unplug
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "vol->encryption" is
non-NULL iff the volume is encrypted.
Note that partial encryption information (e.g. specifying an encryption
format, but not the key/passphrase) is valid, libvirt will automatically
choose value for the missing information during volume creation. The
user can read the volume XML, and use the unmodified <encryption> tag in
future operations (without having to be able to understand) its contents.
* docs/formatstorage.html, docs/formatstorage.html.in: Document
storage volume encryption options
* src/storage_conf.c, src/storage_conf.h: Hook up storage
encryption XML handling
* tests/storagevolschemadata/vol-qcow2.xml: Test case for encryption
schema changes
Test case for the fix applied in
commit 14435163a0
Author: Daniel Veillard <veillard@redhat.com>
Date: Fri Jun 26 18:14:16 2009 +0000
* tests/sexpr2xmldata/sexpr2xml-pv-vfb-type-crash.sexpr,
tests/sexpr2xmldata/sexpr2xml-pv-vfb-type-crash.xml: Data
files exhibiting the crash
* tests/sexpr2xmltest.c: Process new data files
PCI device assignment is only supported in KVM's fork of qemu, so we
should really detect its availability and give a nice error if its
not supported.
* src/qemu_conf.[ch]: introduce QEMUD_CMD_FLAG_PCIDEVICE indicating
that the -pcidevice command line option is available
* tests/*: update the tests
* src/logging.c src/logging.h src/libvirt_private.syms:
define new functions virLogSetFromEnv and virLogParseDefaultPriority
* qemud/qemud.c src/libvirt.c tests/eventtest.c: cleanup to use the
unified functions
A subsequent commit will add a "canonical" field to this structure,
this patch basically just prepares the way for that.
The new type is added, along with virCapabilitiesAlloc/FreeMachines()
helpers and a whole bunch of code to make the transition.
One quirk is that virCapabilitiesAddGuestDomain() and
virCapabilitiesAddGuest() take ownership of the machine list rather
than duping it. This makes sense to avoid needless copying.
* src/capabilities.h: add the virCapsGuestMachine struct and use it
in virCapsGuestDomainInfo, add prototypes for new functions and
update the AddGuest() prototypes
* src/capabilities.c: add code for allocating and freeing the new
type, change the machines parameter to AddGuest() etc.
* src/libvirt_private.syms: export the new helpers
* src/qemu_conf.c: update all the machine type code to use the new
struct
* src/xen_internal.c: ditto
* tests/testutilsqemu.c: ditto
We need these so that we can remove the devices via the monitor.
* src/domain_conf.h: add nic_name and hostnet_name to virDomainNetDef
* src/domain_conf.c: free nic_name and hostnet_name
* src/qemu_conf.c: add qemuAssignNetNames(), use it if qemu has
support for the param and pass the names on the command line
* tests/qemuxml2argv*: add a test for this
Add QEMUD_CMD_FLAG_NET_NAME to indicate that '-net ...,name=foo' is
supported and QEMUD_CMD_FLAG_HOST_NET_ADD to indicate that the
'host_net_add' monitor command is available.
Set both these flags if the qemu version is greater than 0.10.0.
Checking via the '-help' output would not work for the monitor command
and even for the command line arg, it would be quite fragile.
* src/qemu_conf.h: add new flags as aliases of QEMUD_CMD_FLAG_0_10
* src/qemu_conf.c: set QEMUD_CMD_FLAG_0_10 for versions >= 0.10.0
* tests/qemuhelptest.c: set QEMUD_CMD_FLAG_0_10 for the appropriate
qemu versions
by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.
* tests/interfaceschematest: test all XML data against the interface
schemas
* tests/interfacexml2xmltest.c: parse and reserialize all XML data
and check the output is identical
* tests/Makefile.am: hook up the tests
* tests/.gitignore: add ignore test
* docs/schemas/interface.rng: schemas for the interface XML files
directly imported from netcf-0.1.0
* tests/interfaceschemadata/*.xml: set of test files from netcf-0.1.0
changed to use single quote instead of double quote
We keep support for the pty based monitor so that we can re-connect
to VMs started by older versions of libvirtd.
* src/domain_conf.c: handle formatting and parsing unix monitors
* src/qemu_driver.c: add qemudOpenMonitorUnix(), remove the monitor
pty path searching from qemudFindCharDevicePTYs(), switch
qemudStartVMDaemon() and qemuDomainXMLToNative() to using a unix
monitor
* tests/qemuxml2argvtest.c: switch to using a unix monitor
* tests/qemuxml2argvdata/qemuxml2argv-*.args: update test data
There are no functional changes in this patch apart from adding the
monitor type to the state XML.
The patch mostly consists of switching to use virDomainChrDef every
where to describe the monitor.
* src/domain_conf.h: replace monitorpath with monitor_chr
* src/domain_conf.c: handle parsing the monitor type and initializing
monitor chr
* src/qemu_conf.[ch]: make qemudBuildCommandLine take a
virDomainChrDefPtr and use that to build the -monitor parameter
* src/qemu_driver.c: split pty specific and common code from
qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr
* tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change
It failed in a non-srcdir build because those 5 sample output
files were not included in the distribution tarball. Include them.
* tests/Makefile.am (qemuhelpdata, EXTRA_DIST): Include these:
kvm-74, kvm-86, qemu-0.10.5, qemu-0.9.1, qemu-kvm-0.10.5.
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
when starting guests if video card is present
* tests/qemuhelptest.c: Change to use constants instead
of hardcoded hex numbers, and add VGA support
* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
element for testing graphics adapter
* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
* src/node_device_hal.c src/node_device_conf.[ch]: add support
for serial number in HAL storage backend, patch by Dave Allan
* docs/schemas/nodedev.rng
tests/nodedevschemadata/storage_serial_3600c0ff000d7a2a5d463ff4902000000.xml:
update the schemas and add a test case, also by Dave Allan
Daniel
* src/Makefile.am src/node_device.[ch] src/node_device_conf.[ch]
src/node_device_hal.[ch] src/node_device_hal_linux.c
src/qemu_driver.c src/remote_internal.c src/storage_backend.c
src/virsh.c src/xen_unified.c tests/nodedevxml2xmltest.c
po/POTFILES.in: implementation for node device create and destroy
in NPIV support, patch by David Allan
Daniel
* src/qemu_conf.c docs/schemas/domain.rng
tests/capabilityschemadata/caps-qemu-kvm.xml: PPC Qemu Machine Type
changed from g3bw to g3beige some time ago, patch by Thomas Baker
Daniel
* docs/schemas/storagevol.rng docs/formatstorage.html[.in]
tests/storagevolschemadata/vol-qcow2.xml: fix storage volume
inconsistencies in schema and document, patch by Ryota Ozaki
daniel
virExec will write out the pid of the daemonized process only. Use this
in the QEMU driver, rather than QEMU's pidfile, so we can catch errors we
might miss if the emulator bails early.
Seems like a simple typo - it has been "format=" since the flag
was introduced, but we added it as "fmt=".
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* tests/libvirtd-pool: New file.
Exercise the new unix_sock_dir option
* tests/libvirtd-fail: New file.
* tests/Makefile.am (test_scripts): Add libvirtd-fail and libvirtd-pool.
* docs/schemas/domain.rng src/domain_conf.c src/domain_conf.h
src/qemu_conf.c
tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml:
adds a new <hostdev managed='(yes|no)'> property
to host devices indicating whether or not we should
automatically dettach/reset, patch by Mark McLoughlin
daniel
Add a test to check node device XML parsing by first parsing
the XML, then re-formatting as XML and finally comparing the
resulting XML to the original XML.
* docs/formatdomain.html.in docs/libvirt.rng docs/formatdomain.html:
document the new PCI passthrough format
* tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.args
tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml:
and add a regression test for it.
Daniel
* qemud/qemud.c qemud/test_libvirtd_qemu.aug tests/Makefile.am
tests/daemon-conf: fix make check with the new logging support
the messages now carry a timestamp which need to be removed,
the daemon needs to exit if the log configuration informations
are wrong and we also look at the LIBVIRT_DEBUG environment
variable
Daniel
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.args
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml:
slightly modified patch for SDL fullscreen from Itamar Heim
* docs/formatdomain.html docs/formatdomain.html.in docs/libvirt.rng:
update the schemas and docs about the sdl graphic element attributes
* AUTHORS: add Itamar Heim
Daniel
* src/virsh.c (cmdPoolStart, cmdStart): Change hard-coded
vshCommandOptDomainBy string argument to match just-changed
option name. Cole Robinson reported that "virsh start" was
broken and provided that part of the fix.
Bug introduced by yesterday's "virsh.c: tweak options to produce
more accurate help".
* tests/start: New file. Test for the above fix.
* tests/Makefile.am (test_scripts): Add start.
This test would hang when failing to perturb the soon-to-be-
added numeric (and non-boolean) valued parameters, max_clients,
max_workers, min_workers.
* tests/daemon-conf: Require that all commented-out settings
in libvirtd.conf have the same form. Before, two parameters
were not being tested, since a space had snuck between the
leading "#" and the "param = value" parts.
Apply each RHS-value-perturbing transformation
separately, not in series.
Let VERBOSE=yes turn on debugging.
Be more verbose by default, since this is a relatively
long-running test.
* qemud/libvirtd.conf: Normalize the spacing around each setting
that is to be perturbed by tests/daemon-conf.
* tests/virsh-synopsis: new file
* tests/Makefile.am (test_scripts): Add virsh-synopsis.
* src/virsh.c: Correct help SYNOPSIS for each of seven commands.
When I first ran this script, "make check" failed like this:
...
invalid help SYNOPSIS for net-create:
create a network from an XML <file>
invalid help SYNOPSIS for net-define:
define a network from an XML <file>
invalid help SYNOPSIS for net-start:
start <network>
invalid help SYNOPSIS for pool-create:
create a pool from an XML <file>
invalid help SYNOPSIS for pool-define:
define a pool from an XML <file>
invalid help SYNOPSIS for pool-start:
start <pool>
invalid help SYNOPSIS for vol-create:
create <file>
FAIL: virsh-synopsis
* tests/virshtest.c: Embed literal, expected output here, rather than
using virshdata/*.txt file names.
Factor out some common constructs.
(testCompareOutputLit): New function.
(testCompareOutput): #ifdef-out, not that it's unused.
* tests/Makefile.am (SUBDIRS): Remove virshdata/ and all files in it.
* docs/testnode.xml: Fix typo in a comment.
* configure.in (AC_OUTPUT): Remove tests/virshdata/Makefile.
* Makefile.maint (sync-vcs-ignore-files): New target.
Prompted by a patch from James Morris.
http://thread.gmane.org/gmane.comp.emulators.libvirt/8619/focus=8773
Add all (now-generated) .gitignore files.
* .gitignore: New file.
* build-aux/.gitignore: New file.
* docs/.gitignore: New file.
* docs/devhelp/.gitignore: New file.
* docs/examples/.gitignore: New file.
* docs/examples/python/.gitignore: New file.
* gnulib/lib/.gitignore: New file.
* gnulib/lib/arpa/.gitignore: New file.
* gnulib/lib/netinet/.gitignore: New file.
* gnulib/lib/sys/.gitignore: New file.
* gnulib/tests/.gitignore: New file.
* include/.gitignore: New file.
* include/libvirt/.gitignore: New file.
* po/.gitignore: New file.
* proxy/.gitignore: New file.
* python/.gitignore: New file.
* python/tests/.gitignore: New file.
* qemud/.gitignore: New file.
* src/.gitignore: New file.
* tests/.gitignore: New file.
* tests/confdata/.gitignore: New file.
* tests/sexpr2xmldata/.gitignore: New file.
* tests/virshdata/.gitignore: New file.
* tests/xencapsdata/.gitignore: New file.
* tests/xmconfigdata/.gitignore: New file.
* tests/xml2sexprdata/.gitignore: New file.
* src/qemu_conf.c: fix serial/telnet to use "server" option
rather than "listen"
* tests/qemuxml2argvdata/qemuxml2argv-serial-tcp-telnet.args:
fix the test case too
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Adjust the
code that creates "actual" output, so that it too produces a
newline-terminated buffer.
* tests/qemuxml2argvdata/*.args: Append a newline to each, via:
for i in $(find|grep '\.args$'); do echo >> $i;done
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
src/qemu_driver.c: patch from Guido Günther allowing to add
disk as USB devices
* docs/libvirt.rng: extend the schemas for the new value
* tests/qemuxml2argvdata/qemuxml2argv-disk-usb.args
tests/qemuxml2argvdata/qemuxml2argv-disk-usb.xml
tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: add a specific
test to the regression suite
Daniel
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
src/qemu_driver.c: Patch from Guido Günther allowing to pass
usb devices to qemu/kvm
* docs/libvirt.rng: add the new functionality to the grammar
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.args
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml
tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: adding examples
to the regression tests
* libvirt.spec.in: fix the licence tag
Daniel
part, this doesn't really concern libvirt, since for things like attach and
detach we just pass it through and let xend worry about whether it is supported
or not. The one place this breaks down is in the stats collecting code, where
we need to figure out the device number so we can go digging in /sys for the
statistics.
To remedy this, I've re-written xenLinuxDomainDeviceID() to use regular
expressions to figure out the device number from the name. The major advantage
is that now xenLinuxDomainDeviceID() looks fairly identical to
tools/python/xen/util/blkif.py (in the Xen sources), so that adding additional
devices in the future should be much easier. It also reduces the size of the
code, and, in my opinion, the code complexity.
With this patch in place, I was able to get block statistics both on older style
devices (/dev/xvda) and on the new, expanded devices (/dev/xvdaa).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
handling code. In particular, if you had a section of XML like:
<disk type='file' device='cdrom'>
<target dev='hdc' bus='ide'/>
<readonly/>
</disk>
This used to work with older libvirt, but now fails. This is because we are
actually passing the literal string (null) to the qemu command-line, which qemu
barfs on. This patch fixes it up by making it blank, which allows qemu to
continue on it's merry way.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/virsh.c (cmdUndefine): Tell user to shutdown and then use name or UUID.
* tests/undefine: New test. Exercise virsh's undefine command.
* tests/Makefile.am (test_scripts): Add undefine.
release
* src/xm_internal.c: fix xm driver serialization escapes
* tests/xmconfigtest.c tests/xmconfigdata/test-escape-paths.cfg
tests/xmconfigdata/test-escape-paths.xml: add test for previous
problem
Daniel
* src/util.c (fread_file_lim): Use VIR_REALLOC_N, not VIR_ALLOC_N.
Bug introduced in 895d0fdf5b.
* tests/Makefile.am (test_scripts): Add read-bufsiz.
* tests/read-bufsiz: New test for the above.
* configure.in: Document AC_SYS_LARGEFILE.
* docs/hvsupport.html.in: Document HV support for virDomainBlockPeek.
* include/libvirt/libvirt.h.in, src/driver.h, src/libvirt.c,
src/libvirt_sym.version: Add virDomainBlockPeek infrastructure.
* src/qemu_driver.c, src/test.c: Null versions of this call.
* src/xen_unified.c, src/xend_internal.c, src/xend_internal.h,
src/xm_internal.c, src/xm_internal.h: Xen implementation.
* tests/sexpr2xmldata/sexpr2xml-curmem.xml,
tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: XML output
has been reordered slightly in the Xen driver, but should be
functionally the same.
Done using this command (also includes .c.in and .h.in files):
for i in $(g ls-files|grep -E '\.[ch](\.in)?$'|grep -v gnulib); do
expand -i $i > j && mv j $i;done
* src/util.c (fread_file_lim): New function.
(__virFileReadAll): Use fread_file_lim, rather than requiring
that stat.st_size provide a usable file size.
* tests/read-non-seekable: New test, for the above.
* tests/Makefile.am (test_scripts): Add read-non-seekable.
* tests/test-lib.sh (mkfifo_or_skip_): New helper function.
* tests/Makefile.am (test_scripts): Add vcpupin.
(EXTRA_DIST): Add test-lib.sh.
* tests/test-lib.sh: Testing framework, from coreutils.
* tests/vcpupin: New file.
* build-aux/mktempd: New file, from gnulib.
* bootstrap: Add posix-shell and mktempd to the list of imported modules.
* gnulib/m4/posix-shell.m4: New file, from gnulib.
* tests/Makefile.am (TESTS_ENVIRONMENT): Correct invalid
settings of abs_top_builddir and abs_top_srcdir.
Also prepend src/ to PATH, so we test the just-built virsh,
not whatever happens to be in the original $PATH.
src/libvirt.c src/qemu.conf src/remote_internal.c src/xend_internal.c
tests/confdata/libvirtd.conf tests/confdata/libvirtd.out: patch from
Atsushi SAKAI fixing a ot more typo
Daniel
* src/Makefile.am: Create a convenience library, libvirt_test.la,
and don't restrict access to *its* symbols.
* tests/Makefile.am (LDADDS): Add ../src/libvirt_test.la, so that
"configure --disable-shared" no longer provokes link errors.
(LIBVIRT): Remove definition.
(LDADDS): Remove use.
($(LIBVIRT)): Remove rule.
(LDADDS): Use the new convenience library instead.
(CLEANFILES): Define.
* docs/examples/index.py (dump_Makefile): Append $(COVERAGE_LDFLAGS),
to the LDADDS definition, to avoid link error with the combination of
--enable-test-coverage and --disable-shared.
* docs/examples/Makefile.am: Regenerate.
* docs/examples/index.html: Likewise.
* qemud/Makefile.am (libvirtd_LDFLAGS): Append $(COVERAGE_LDFLAGS).
* src/libvirt_sym.version: Remove some SP-before-TAB.
Use <config.h>, not "config.h", per autoconf documentation.
* Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable.
* .x-sc_require_config_h: New file, to list exempted files.
* Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.
* docs/examples/suspend.c: Declare global "conn" to be static.
* tests/qemuxml2argvtest.c: Declare global "driver" to be static.
* tests/qemuxml2xmltest.c: Likewise.
Author: Jim Meyering <meyering@redhat.com>
* tests/Makefile.am (TESTS_ENVIRONMENT): Adjust PATH setting
to work also with automake-1.9. Can't use $(abs_top_builddir).
Author: Jim Meyering <meyering@redhat.com>
Given code like: T *var = calloc (n, sizeof (T));
Convert to this: T *var = calloc (n, sizeof (*var));
This first-cut change adjusts all malloc, calloc, and
realloc statements.
The only binary differences are in remote_internal.c
(due to the bug fix) and in xmlrpc.c (due to factorization).
* python/libvir.c: As above.
* qemud/event.c: Likewise.
* qemud/mdns.c: Likewise.
* qemud/qemud.c: Likewise.
* qemud/remote.c: Likewise.
* src/bridge.c: Likewise.
* src/buf.c: Likewise.
* src/conf.c: Likewise.
* src/hash.c: Likewise.
* src/iptables.c: Likewise.
* src/openvz_conf.c: Likewise.
* src/qemu_conf.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/test.c: Likewise.
* src/xen_internal.c: Likewise.
* src/xen_unified.c: Likewise.
* src/xm_internal.c: Likewise.
* src/xml.c: Likewise.
* tests/qemuxml2argvtest.c: Likewise.
* src/xmlrpc.c (xmlRpcValuePtr): Likewise, and minor factorization.
* src/remote_internal.c (remoteAuthMakeCredentials): Use the right
type when allocating space for an array of cred _pointers_.
And remove a minor diagnostic inconsistency.
* tests/daemon-conf: New test.
* tests/Makefile.am (TESTS_ENVIRONMENT): Prepend qemud/ to PATH,
so we can invoke libvirtd without an absolute name.
(test_scripts): Add daemon-conf.
* qemud/qemud.c (remoteConfigGetAuth): Use checkType,
rather than open-coding it with a different diagnostic.
New files go into these directories:
gnulib/lib
gnulib/m4
gnulib/tests
* bootstrap: A wrapper around gnulib-tool.
* configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY
before any macro that uses AC_COMPILE_IFELSE.
(AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile.
* Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests
early enough that those tests run before any libvirt unit tests.
* m4/Makefile.am: Remove file. Not needed.
* src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la.
* src/nodeinfo.c: Include "physmem.h".
* qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h".
(MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions.
(virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate.
* tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS): Add ../gnulib/lib/libgnu.la.
* qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la.
* tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total
memory from a file.
Update expected output not to include "Memory: NNNN"
* tests/nodeinfodata/linux-nodeinfo-1.txt:
* tests/nodeinfodata/linux-nodeinfo-2.txt:
* tests/nodeinfodata/linux-nodeinfo-3.txt:
* tests/nodeinfodata/linux-nodeinfo-4.txt:
* tests/nodeinfodata/linux-nodeinfo-5.txt:
* tests/nodeinfodata/linux-nodeinfo-6.txt:
* src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that
would conflict with the one now in "config.h".
* autogen.sh: Add -I gnulib/m4.
* src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE.
Instead, include "config.h".
* qemud/qemud.c: Remove definition of _GNU_SOURCE.
* src/openvz_driver.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/remote_internal.c: Likewise.
* configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch
of gettextize-generated files go into build-aux/, rather than in
the top-level directory.
* .cvsignore: Adjust.
* build-aux/.cvsignore: New file.
Author: Jim Meyering <meyering@redhat.com>
* python/libvir.c, python/libvirt_wrap.h, qemud/qemud.c,
qemud/remote.c, src/internal.h, src/openvz_conf.c,
src/openvz_driver.c, src/proxy_internal.h, src/qemu_conf.c,
src/qemu_driver.c, src/remote_internal.h, src/test.h, src/util.c,
src/xen_unified.c, src/xen_unified.h, tests/nodeinfotest.c,
tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c, tests/reconnect.c,
tests/sexpr2xmltest.c, tests/virshtest.c, tests/xencapstest.c,
tests/xmconfigtest.c, tests/xml2sexprtest.c:
Change #include <> to #include "" for local includes.
Removed many includes from src/internal.h and put them in
the C files which actually use them.
Removed <ansidecl.h> - unused.
Added a comment around __func__.
Removed a clashing redefinition of VERSION symbol.
All limits (PATH_MAX etc) now done in src/internal.h, so we
don't need to include those headers in other files.
* tests/Makefile.am, tests/nodeinfotest.c, tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c, tests/sexpr2xmltest.c, tests/virshtest.c,
tests/xencapstest.c, tests/xmconfigtest.c, tests/xml2sexprtest.c:
Miscellaneous fixes to the tests to compile under Cygwin.
if the path environment variable is missing, add the tests for
<shareable/> from/to w! ode for disk
* tests/sexpr2xmldata/sexpr2xml-disk-block-shareable.sexpr
tests/sexpr2xmldata/sexpr2xml-disk-block-shareable.xml
tests/xml2sexprdata/xml2sexpr-disk-block-shareable.sexpr
tests/xml2sexprdata/xml2sexpr-disk-block-shareable.xml:
the new tests data
Daniel
* Makefile.am: Expand some "*" wildcards, and (for now) disable
the relatively unimportant, distuninstallcheck target.
Fix a few redirect-directly-to-target bugs.
Add a few $(srcdir)/ prefixes and add an uninstall-local rule.
* docs/Makefile.am: More of the same. Split some long lines.
* python/Makefile.am: Likewise.
* python/tests/Makefile.am: Likewise.
* qemud/Makefile.am: Likewise.
* tests/Makefile.am: Remove the directories already listed in SUBDIRS.
* docs/examples/index.py: Adapt to produce the desired changes in
docs/examples/Makefile.am. Also, sort *.c, so results are reproducible,
and emit a comment telling emacs and vi that the file is read-only.
* docs/examples/Makefile.am: Regenerate.
Author: Jim Meyering <meyering@redhat.com>
* tests/Makefile.am: Include the contents of the *data directories
in the make-dist-built tarball by adding each of that *data
directories to EXTRA_DIST.
Also add int-overflow (via $(test_scripts)) to EXTRA_DIST.
* tests/nodeinfotest.c: Prepend "$abs_top_srcdir/tests" to
each input file name.
* tests/qemuxml2argvtest.c: Likewise.
* tests/qemuxml2xmltest.c: Likewise.
* tests/sexpr2xmltest.c: Likewise.
* tests/test_conf.sh: Likewise.
* tests/virshtest.c: Likewise.
* tests/xencapstest.c: Likewise.
* tests/xmconfigtest.c: Likewise.
* tests/xml2sexprtest.c: Likewise.
Author: Jim Meyering <meyering@redhat.com>
Patch from Jim Meyering
* src/internal.h: Include <errno.h>.
Define new static inline function, xstrtol_i.
* src/virsh.c: Detect integer overflow in domain ID number
in vshCommandOptDomainBy. Detect overflow and invalid port
number suffix in cmdVNCDisplay.
* src/xend_internal.c: Parse CPU number more carefully in
xenDaemonDomainGetVcpus.
* tests/int-overflow: New script. Test for the above-fixed bug.
* tests/Makefile.am: Add int-overflow to TESTS. Define
TESTS_ENVIRONMENT, to propagate $abs_top_* variables into the
int-overflow script. Adapt the "valgrind" rule not to clobber
new TESTS_ENVIRONMENT.
Daniel
* tests/conftest.c: Use fwrite, not printf, since the
result buffer is not NUL-terminatedi, from Jim Meyering.
* tests/qemuxml2argvtest.c: Initialize vm.migrateFrom[0],
to avoid "read-uninitialized" error from within
qemudBuildCommandLinei, from Jim Meyering.
Daniel
src/driver.h src/libvirt.c src/openvz_driver.c src/qemu_driver.c
src/test.c src/xen_unified.c src/xend_internal.c: add new API
virNodeGetFreeMemory(), extends the driver. Lacks remote and
QEmu support though.
* src/libvirt.c: allows to fix virNodeGetCellsFreeMemory() adding
parameter check for startCell.
* proxy/libvirt_proxy.c src/xend_internal.[ch]
include/libvirt/libvirt.h include/libvirt/libvirt.h.in: applied
vncpasswd dump patch from Mark Johnson but with the
virDomainXMLFlags extension as suggested by Daniel Berrange
this changed a couple of internal APIs too
* tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: fix one of the
tests affected by bootloader dump change.
Daniel
patch from David Lutterkort
* tests/xencapsdata/xen-i686-pae-hvm.xml
tests/xencapsdata/xen-ia64-be-hvm.xml
tests/xencapsdata/xen-ia64-hvm.xml
tests/xencapsdata/xen-x86_64-hvm.xml: this also affects a few tests
Daniel
* src/conf.c, src/test.c, src/xen_internal.c: Readd checking
of errors from virBuffer functions.
* src/sexpr.c: Add comment about use of _GNU_SOURCE.
* src/virsh.c: Remove use of _GNU_SOURCE / isblank.
* src/xml.c, tests/Makefile.am: Minor cleanup.
for arguments to bootloader, patch from Hugh Brock
* tests/sexpr2xmltest.c tests/xml2sexprtest.c
tests/sexpr2xmldata/sexpr2xml-pv-bootloader.sexpr
tests/sexpr2xmldata/sexpr2xml-pv-bootloader.xml
tests/xml2sexprdata/xml2sexpr-pv-bootloader.sexpr
tests/xml2sexprdata/xml2sexpr-pv-bootloader.xml: add specific
regression tests
Daniel
+
+ * TODO: Added a note about requiring C++ compiler because of a
+ possible problem with libtool autoconf macros.
+ * docs/examples/Makefile.am, proxy/Makefile.am, qemud/Makefile.am,
+ src/Makefile.am, tests/Makefile.am: Pass $(WARN_CFLAGS) when
+ linking, so if -fstack-protector is there, gcc will link to
+ the stack protector library.
+ * tests/xencapstest.c: Allow this test to compile when Xen
+ libraries are not enabled.
+
* src/test.c, src/libvirt.c, src/virterror.c,
include/libvirt/virterror.h: Add a VIR_FROM_TEST error class
and ensure that test driver errors are from this class.
Tidy up the error messages generated by the test driver when
user doesn't add a path to the URL and avoid open ("/").
to handle CDRom devices with no device name
* tests/sexpr2xmltest.c tests/xml2sexprtest.c
tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.sexpr
tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml
tests/xml2sexprdata/xml2sexpr-no-source-cdrom.sexpr
tests/xml2sexprdata/xml2sexpr-no-source-cdrom.xml: added regression
tests for this case based on Nobuhiro Itou test inputs.
Daniel
src/Makefile.am src/libvirt.c src/qemu_internal.c src/test.c
src/xen_internal.c src/xen_internal.h src/xend_internal.c
src/xm_internal.c src/xml.c src/xs_internal.c
tests/Makefile.am tests/sexpr2xmltest.c tests/xmconfigtest.c:
allow selective compilation of Xen,QEmu/KVM and test support
in or out at configure time. Also allows to compile on a system
without Xen development installed. All drivers are selected by
default.
Daniel
* acinclude.m4: add LIBVIRT_COMPILE_WARNINGS, copied from
GNOME but with a few more flags we'd been using.
* configure.in: use that instead of setting CFLAGS
directly.
* proxy/Makefile.am, python/Makefile.am, qemud/Makefile.am,
src/Makefile.am, tests/Makefile.am: use $(WARN_CFLAGS)
* src/xend_internal.c, src/xm_internal.c: pass the
connection to virDomainParseXMLDesc()
* src/xml.[ch]: make virDomainParseXMLDesc accept
a virConnectPtr so that we can use it later to
lookup the bridge associated with a network
* tests/xml2sexprtest.c: just pass NULL here, it's
safe
to the XML description and handle its serialization back and
forth between XML and S-Expr
* tests/sexpr2xmltest.c tests/xml2sexprtest.c
tests/sexpr2xmldata/sexpr2xml-curmem.*
tests/xml2sexprdata/xml2sexpr-curmem.*: added specific regression
tests for this, this didn't disturb any of the other tests.
Daniel
* src/xend_internal.c: fix the reconnection problem to xend pointed
by Philippe Berthault
* tests/Makefile.am tests/reconnect.c: add a specific test case
Daniel
* configure.in include/libvirt/virterror.h src/Makefile.am
src/conf.c src/conf.h src/virterror.c src/xen_internal.c:
adding a subset of Xen config file parser, and serializer
* tests/Makefile.am tests/conftest.c tests/test_conf.sh
tests/confdata/Makefile.am tests/confdata/fc4.conf
tests/confdata/fc4.out: adding test program for config in and out
Daniel
include/libvirt/virterror.h python/generator.py python/libvir.c
python/libvirt_wrap.h src/driver.h src/internal.h src/test.h
src/virsh.c src/virterror.c src/xend_internal.c src/xend_internal.h
src/xml.c src/xml.h: moved the includes from include/ to
include/libvirt to reflect the installed include tree. This
avoid using "" in the includes themselves.
Daniel
