Reuse info->outfile for it. This requires us to set paths before
each virTestRun invocation
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Just renamed from existing inName and outActiveName
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
These will need to be separate to share testInfo with qemuxml2argv
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Commit 5b9819eedc started using the virFileWrapper APIs in
the test program, and correctly called them only in the section
of code guarded by WITH_QEMU; however, a single call to the
virFileWrapperClearPrefixes() function ended up in the
hypervisor-agnostic section, causing a build failure on MinGW.
Move the call to the QEMU-only section; while at it, also drop
the virFileWrapperRemovePrefix() calls, which are entirely
redundant since we'd drop all prefixes immediately afterwards
anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
If a management application wants to use firmware auto selection
feature it can't currently know if the libvirtd it's talking to
support is or not. Moreover, it doesn't know which values that
are accepted for the @firmware attribute of <os/> when parsing
will allow successful start of the domain later, i.e. if the mgmt
application wants to use 'bios' whether there exists a FW
descriptor in the system that describes bios.
This commit then adds 'firmware' enum to <os/> element in
<domainCapabilities/> XML like this:
<enum name='firmware'>
<value>bios</value>
<value>efi</value>
</enum>
We can see both 'bios' and 'efi' listed which means that there
are descriptors for both found in the system (matched with the
machine type and architecture reported in the domain capabilities
earlier and not shown here).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The point of this API is to fetch all FW descriptors, parse them
and return list of supported interfaces and SMM feature for given
combination of machine type and guest architecture.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit a5e1602090.
Getting rid of unistd.h from our headers will require more work than
just fixing the broken mingw build. Revert it until I have a more
complete proposal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
util/virutil.h bogously included unistd.h. Drop it and replace it by
including it directly where needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'viralloc.h' does not provide any type or macro which would be necessary
in headers. Prevent leakage of the inclusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a constrained CI environment, where it is intentional that attempts
to write outside the current directory will fail, virsh-snapshot was
failing:
@@ -1,2 +1,3 @@
error: invalid argument: parent s3 for snapshot s2 not found
error: marker
+error: Failed to create '/home/travis/.cache/libvirt/virsh': Permission denied
FAIL virsh-snapshot (exit status: 1)
But we've already solved the problem in virsh-uriprecedence: tell
virsh to use XDG locations pointing to somewhere we can write rather
than its default of falling back to $HOME with the test being at risk
of breaking due to the user's environment and/or unacceptably altering
the user's normal cache. Hoist that solution into test-lib.sh, so
that all scripts can use it as needed. While at it, fix a latent typo
where XDG_RUNTIME_HOME was set to a literal relative directory name
"XDG_CACHE_HOME" (the typo did not affect virsh-uriprecedence, but
could matter to other clients).
Fixes: 280a2b41
Fixes: 398de147
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
There are a few differences, but the one we're interested in is
that PCIe Root Ports are finally available: as a result of this,
our riscv64-virt-headless guest will switch from virtio-mmio to
virtio-pci.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1693066
Up until memfd introduction (in 24b74d187c) we did not need to
know @pagesize because qemuGetDomainHupageMemPath() could deal
with it being zero (value of zero means use the default hugetlbfs
mount). But since for memfd we are not passing a path to
hugetlbfs mount rather the page size value we need to know its
value upfront.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Somehow, these were not tested. Use symlinks to point expected
output back to the input. This way we can also fix some
discrepancies in the input XMLs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current location looks very arbitrary. Move it to the end of
the mymain() function so it is less confusing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are three test XMLs that have useless spaces at the
beginning of each line. I intend to add these to qemuxml2xmltest
and make xmlout a symlink to the original XML. In order to do
that the XMLs must look better than they do now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Also switch the expected output of DO_TEST_PARSE_FILE to be
in a file, now that we demonstrated the input files match
the expected string representation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Introduce a new macro DO_TEST_PARSE_FILE which takes the input JSON
from a file instead of a C string.
This lets us get rid of quote escaping and makes the JSON easier to
edit.
The output JSON is still taken from a string and will be moved
separately.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Instead of using JSON in C strings, put it in separate files
for easier manipulation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Quite a few of the tests have a need to mock the stat() / lstat()
functions and they are taking somewhat different & inconsistent
approaches none of which are actually fully correct. This is shown
by fact that 'make check' fails on 32-bit hosts. Investigation
revealed that the code was calling into the native C library impl,
not getting intercepted by our mocks.
The POSIX stat() function might resolve to any number of different
symbols in the C library.
The may be an additional stat64() function exposed by the headers
too.
On 64-bit hosts the stat & stat64 functions are identical, always
refering to the 64-bit ABI.
On 32-bit hosts they refer to the 32-bit & 64-bit ABIs respectively.
Libvirt uses _FILE_OFFSET_BITS=64 on 32-bit hosts, which causes the
C library to transparently rewrite stat() calls to be stat64() calls.
Libvirt will never see the 32-bit ABI from the traditional stat()
call. We cannot assume this rewriting is done using a macro. It might
be, but on GLibC it is done with a magic __asm__ statement to apply
the rewrite at link time instead of at preprocessing.
In GLibC there may be two additional functions exposed by the headers,
__xstat() and __xstat64(). When these exist, stat() and stat64() are
transparently rewritten to call __xstat() and __xstat64() respectively.
The former symbols will not actally exist in the library at all, only
the header. The leading "__" indicates the symbols are a private impl
detail of the C library that applications should not care about.
Unfortunately, because we are trying to mock replace the C library,
we need to know about this internal impl detail.
With all this in mind the list of functions we have to mock will depend
on several factors
- If _FILE_OFFSET_BITS is set, then we are on a 32-bit host, and we
only need to mock stat64 and __xstat64. The other stat / __xstat
functions exist, but we'll never call them so they can be ignored
for mocking.
- If _FILE_OFFSET_BITS is not set, then we are on a 64-bit host and
we should mock stat, stat64, __xstat & __xstat64. Either may be
called by app code.
- If __xstat & __xstat64 exist, then stat & stat64 will not exist
as symbols in the library, so the latter should not be mocked.
The same all applies to lstat()
These rules are complex enough that we don't want to duplicate them
across every mock file, so this centralizes all the logic in a helper
file virmockstathelper.c that should be #included when needed. The
code merely need to provide a filename rewriting callback called
virMockStatRedirect(). Optionally VIR_MOCK_STAT_HOOK can be defined
as a macro if further processing is needed inline.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use size_t for all sizes. The '*' modifier unfortunately does require an
int so a temporary variable is necessary in the tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
This was meant to stop abusing the members directly, but we don't do
this for other internal structs. Additionally this did not stop the
test from touching the members. Remove the header obscurization.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'blockdev-snapshot-sync' is present in QEMU since v0.14.0-rc0 and
'transaction' since v1.1.0 (52e7c241ac766406f05fa)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'drive-mirror' command in v1.3.0 (d9b902db3fb71fdc)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'block-commit' command in v1.3.0 (ed61fc10e8c8d2)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was detected by the presence of 'block-stream' which is present in
qemu since v1.1 (db58f9c0605fa151b8c4)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the disk source we need to keep the disk index (which is in
the qemu driver used for identification of the source for block jobs)
for the <mirror> element so that when it's replaced as a disk source
after pivoting all the allocated data is present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the block copy operation is started with a reused external file in
incremental mode libvirt will need to open and insert the backing chain
for that file into qemu (in -blockdev mode). This means that we'll need
to track the backing chain and metadata such as node names for the full
chain of <mirror>.
This patch invokes the full backing chain formatter and parser for
<mirror> so that the chain can be kept with <mirror>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainDiskSourceParse was now just a thin wrapper without any extra
value. Replace all usage of it by the function it calls and remove the
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When adding <migrationSource> I've used a slightly unusual approach. To
allow using the disk source XML parser and formatter convert
<migrationSource> to look like <disk>. This means that <source> will be
added as a subelement of <migrationSource> rather than being formatted
inline.
Conversion from the old format in the parser is very simple as it
involves only moving the XPath context current node slightly if the new
format is found.
The status XML to XML test shows that the upgrade is done correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcomming change will modify some aspects. To allow testing upgrade path
add a separate output file so that we can see the conversion from old to
new config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcomming change will modify some aspects. To allow testing upgrade path
add another disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Block job related data will be stored in a has table and formatted into
the status XML. Use the mock to guarantee stable tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We parse the seclabels and use them internally so omitting them when
formatting would be misleading. Additionally our schema actually allows
them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The layout of my home directory is somewhat peculiar: I store
all git repositories in ~/src/upstream, but since I spend
almost all of my time hacking on libvirt, I also have a
convenience symlink ~/src/libvirt -> ~/src/upstream/libvirt
that I use to access that specific git repository.
The above setup has served me well for years; however, ever
since commit ca1471622d dropped our own custom definitions
for abs_{,top_}{src,build}dir and started using the ones
provided by autotools, virstoragetest has started reliably
failing with errors such as
2) Storage backing chain 2 ...
Offset 0
Expect [chain member: 0
path:/home/abologna/src/upstream/libvirt/tests/virstoragedata/raw
backingStoreRaw: <null>
capacity: 0
encryption: 0
relPath:<null>
type:1
format:1
protocol:none
hostname:<null>
]
Actual [chain member: 0
path:/home/abologna/src/libvirt/tests/virstoragedata/raw
backingStoreRaw: <null>
capacity: 0
encryption: 0
relPath:<null>
type:1
format:1
protocol:none
hostname:<null>
]
... FAILED
Using abolute paths instead of canonical ones in the tests makes
the problem go away.
Note that all tests that are specifically designed to test path
canonicalization via TEST_PATH_CANONICALIZE() were passing even
before this patch and are not touched by it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in fdf6c89ee7, this dependency looks weird. It was
needed because of the way that while() loop was written - it
fetches next argument in every iteration. Therefore, our only
option was for ARG_END to have the same value as QEMU_CAPS_LAST.
This also meant that QEMU_CAPS_* could have been only at the end
of the __VA_ARGS__.
This commit reworks the while() loop and removes the dependency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is one specific caller (testInfoSetArgs() in
qemuxml2argvtest.c) which expect the va_list argument to change
after returning from the virQEMUCapsSetVAList() function.
However, since we are passing plain va_list this is not
guaranteed. The man page of stdarg(3) says:
If ap is passed to a function that uses va_arg(ap,type), then
the value of ap is undefined after the return of that function.
(ap is a variable of type va_list)
I've seen this in action in fact: on i686 the qemuxml2argvtest
fails on the second test case because testInfoSetArgs() sees
ARG_QEMU_CAPS and calls virQEMUCapsSetVAList to process the
capabilities (in this case there's just one
QEMU_CAPS_SECCOMP_BLACKLIST). But since the changes are not
reflected in the caller, in the next iteration testInfoSetArgs()
sees the QEMU capability and not ARG_END.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The mock fopen() function will abort if "/proc/mounts" is
requested with "r" permissions and VIR_CGROUP_MOCK_FILENAME
env var is not set.
Unfortunately this is triggering by the libselinux library
constructor when it tries to read /proc/mounts to find out
if selinuxfs is mounted in an unusual place.
This, however, only affects libselinux in Debian as that
opens with "r", while in Fedora / RHEL it opens "re" and
thus luckily never triggered the abort(), instead getting
an EACCESS.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If qemuFirmwareFetchConfigs() returned more or fewer paths than
expected all that we see is the following error message:
Expected 5 paths, got 7
While it is technically correct (the best kind of correct), we
can do better:
Unexpected path (i=0). Expected /some/path got /some/other/path
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The individual qemuDomainDetach*Device() functions will soon be "less
functional", since some of the code that is duplicated in 10 of the 12
detach functions is going to be moved into the common
qemuDomainDetachDeviceLive(), which calls them all.
qemuhotplugtest.c is the only place any of these individual functions
is called other than qemuDomainDetachDeviceLive() itself. Fortunately,
qemuDomainDetachDeviceLive() provides exactly the functionality needed
by the test driver (except that it supports detach of more device
types than the test driver has tests for).
This patch replaces the calls to
qemuDomainDetach(Chr|Shmen|Watchdog|Disk)Device with a single call to
the higher level function, allowing us to shift functionality between
the lower level functions without breaking the tests.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Had this been in place earlier, I would have avoided the bugs in
commit 0baf6945 and 55c2ab3e. Writing the test required me to extend
the power of virsh - creating enough snapshots to cause fanout
requires enough input in a single session that adding comments and
markers makes it easier to check that output is correct. It's still a
bit odd that with test:///default, reverting to a snapshot changes the
domain from running to paused (possibly a bug in how the test driver
copied from the qemu driver) - but the important part is that the test
is reproducible, and any future tweaks we make to snapshot code have
less chance of breaking successful command sequences.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
As the previous commit mentioned, argv mode (such as when you feed
virsh via stdin with <<\EOF instead of via a single shell argument)
didn't permit comments. Do this by treating any command name token
that starts with # as a comment which silently eats all remaining
arguments to the next newline or semicolon.
Note that batch mode recognizes unquoted # at the start of any word as
a command as part of the tokenizer, while this patch only treats # at
the start of the command word as a comment (any other # remaining by
the time vshCommandParse() is processing things was already quoted
during the tokenzier, and as such was probably intended as the actual
argument to the command word earlier in the line).
Now I can do something like:
$ virsh -c test:///default <<EOF
# setup
snapshot-create-as test s1
snapshot-create-as test s2
# check
snapshot-list test --name
EOF
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Continuing from what I did in commit 4817dec0, now I want to write a
sequence that is self-documenting. So I need comments :)
Now I can do something like:
$ virsh -c test:///default '
# setup
snapshot-create-as test s1
snapshot-create-as test s2
# check
snapshot-list test --name
'
Note that this does NOT accept comments in argv mode, another patch
will tackle that.
(If I'm not careful, I might turn virsh into a full-fledged 'sh'
replacement? Here's hoping I don't go that far...)
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Base macro to unify the actual testCompareXMLToArgv test calls
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* ARG_CAPS_ARCH must be specified with ARG_CAPS_VER
* ARG_QEMU_CAPS shouldn't be specified with ARG_CAPS_*
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Move DO_CAPS_TEST* qemuCaps init and all the associated setup
into testInfoSetArgs, adding ARG_CAPS_ARCH and ARG_CAPS_VER
options and using those to build the capsfile path locally
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have tests for simple guests with graphics for basically
all other architectures, so it makes sense to include s390x
too.
The input file was generated by running
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics vnc \
--print-xml
followed by minor tweaks, using a version of virt-manager
that includes commit 7b9de27a990f.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
As of commit db6c7070e25a, virt-manager will default to using
virtio-blk rather than virtio-scsi for aarch64/virt guests,
bringing them in line with other architectures. Update our test
case to reflect this change.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Commit 3bd4ed46 introduced this element as required which
breaks backcompat for test driver. Let's make the element optional.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The only use for the 'current' member of virDomainSnapshotDef was with
the PARSE/FORMAT_INTERNAL flag for controlling an internal-use
<active> element marking whether a particular snapshot definition was
current, and even then, only by the qemu driver on output, and by qemu
and test driver on input. But this duplicates vm->snapshot_current,
and gets in the way of potential simplifications to have qemu store a
single file for all snapshots rather than one file per snapshot. Get
rid of the member by adding a bool* parameter during parse (ignored if
the PARSE_INTERNAL flag is not set), and by adding a new flag during
format (if FORMAT_INTERNAL is set, the value printed in <active>
depends on the new FORMAT_CURRENT).
Then update the qemu driver accordingly, which involves hoisting
assignments to vm->current_snapshot to occur prior to any point where
a snapshot XML file is written (although qemu kept
vm->current_snapshot and snapshot->def_current in sync by the end of
the function, they were not always identical in the middle of
functions, so the shuffling gets a bit interesting). Later patches
will clean up some of that confusing churn to vm->current_snapshot.
Note: even if later patches refactor qemu to no longer use
FORMAT_INTERNAL for output (by storing bulk snapshot XML instead), we
will always need PARSE_INTERNAL for input (because on upgrade, a new
libvirt still has to parse XML left from a previous libvirt).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move DO_TEST* qemuCaps init into testInfoSetArgs. This is a step
towards unifying the different test macro implementations
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is closer to the pattern of qemuxml2xml tests, and will make
things easier if we extend testInfo to contain more freeable data
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Rather than make callers do it. The operative info is just arch
and ver which we are passing in already.
Fold in stripmachinealiases too since it is just dependent on
ver value
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
They are potentially useful at the moment, but we will be making
things much more flexible
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows us to drop parseFlags from DO_TEST_FULL
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows us to drop migrateFrom and migrateFd from DO_TEST_FULL
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows us to drop stub GIC values from DO_TEST_FULL calls
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is necessary before we can start adding more optional parameter
implementations to DO_TEST_FULL
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This establishes a pattern that will allow us to make test macros
more general purpose, by taking optional arguments. The general
format will be:
DO_TEST_FULL(...
ARG_FOO, <value1>,
ARG_BAR, <value2>)
ARG_X are just enum values that we look for in the va_args and know
how to interpret.
Implement this for the existing implicit qemuCaps va_args
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For now it just fills in the qemuCaps list. We will expand it
in future patches
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The new 'refresh' element can override the default refresh operations
for a storage pool. The only currently supported override is to set
the volume allocation size to the volume capacity. This can be specified
by adding the following snippet:
<pool>
...
<refresh>
<volume allocation='capacity'/>
</refresh>
...
</pool>
This is useful for certain backends where computing the actual allocation
of a volume might be an expensive operation.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Change domcaps to skip formatting XML if the default
TRISTATE_BOOL_ABSENT is found. Now when domcaps is extended, driver
XML output won't change until an explicit TRISTATE_BOOL value is set
in driver code.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The 'full' test verifies the output of a virDomainCapsPtr built
by hand. It has the following problems:
The domcaps test suite nowadays has 3 hypervisor driver implementations
which should give us plenty of opportunity to get full domcaps coverage.
I don't think this test has much value. And it has the following issues:
- Requires manual intervention to test new domcaps XML, which is easy
to miss, for example gic bits aren't covered there.
- The SET_ALL_BITS trick it uses to fill in enums will output
values that are never reported by any driver implementation
(strings like 'default')
Let's remove it
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The 'empty' demonstrates XML generated when only bare minimum caps
data has been filled in. This will demonstrate changes that alter
the default XML output.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We already document how to generate them, so might as well
go the extra mile and document the remaining steps.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This info can be useful to filter devices visible
to mgmt clients so that they won't see devices that
unsafe/not meaningful to pass thru.
Provide class info the way it is provided by udev or
kernel that is as single 6-digit hexadecimal.
Class element is not optional. I guess this should not
break users that use virNodeDeviceCreateXML because
they probably specify only scsi_host capability on
input and then node device driver gets other capabilities
from udev after device appeared.
HAL driver does not get support for the new element in
this patch.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Vim treats *.h files as cpp ones with respect to syntax highlighting.
Thus "class" in _virNodeDevCapPCIDev highlighted mistakenly.
This can be fixed by filetype detection code tunables but it
is more convinient to skip this tuning by every project member.
Let's just use "klass" as field name instead of _class or class
and add syntax rule.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By default, qemu user's home dir points to '/' which shouldn't be used
at all. We therefore pass the HOME variable from the current variable
iff not running as SUID, which means that for systemd we never set it.
This patch makes sure, that for system QEMU this is always set to
libDir/<driver>, session mode is left untouched.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For session mode, only XDG_CACHE_HOME is set, because we want to remain
integrating with services in user session, but for system mode, this
would have become reading/writing to '/' which carries the obvious issue
with permissions (also, '/' is the wrong location in 99.9% cases anyway).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We provide a custom configure option --enable-test-coverage and
'make cov' target to generate code coverage reports. However gnulib
already provides a 'make coverage' which 'just works' and doesn't
require a special configure option.
This drops our custom implementation in favor of 'make coverage'.
Reports are now output to cov/index.html
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Apparently this was necessary in the past because old versions
of autoconf/automake didn't make them available, but these
days all of the platforms we target include recent enough
autotools - as evidenced by the fact that, for example, we
already use abs_top_srcdir in tools/ despite the fact that
tools/Makefile.am is missing the same boilerplate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We already have code that defines all abs_* variables at the
top of tests/Makefile.am, so there is no point in redefining
them a second time (using a slightly different shell
incantation to boot).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.html
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This code snippet has clearly been cargo-culted, and all its
instances can be safely dropped seeing as 1) a much better
way to handle the scenario in C programs would be to pass the
value via the preprocessor, and 2) the value is actually not
used anywhere after being defined.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
TEST_DRIVER_DIR is defined as "$(top_builddir)/src/.libs"; however,
as of commit bc6e206322, virDriverLoadModule() will search (the
absolute version of) that directory automatically, which means
passing it through the environment is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
LIBVIRT_DRIVER_DIR is defined as (what is for all intents and
purposes equivalent to) "$(abs_top_builddir)/src/.libs"; however,
as of commit bc6e206322, virDriverLoadModule() will search that
directory automatically, which means passing it through the
environment is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's no longer used as of commit a9694a8e18.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add support in the domXML<->native config converter for
max_grant_frames. Include a test for the conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for setting max_grant_frames in libxl domain config
object and include a test to check that it is properly converted
from XML to libxl domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All Xen domains have a xenbus device. Implicitly add one if not
already explicitly specified in the domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is mostly to avoid a memleak that is not a true memleak
anyway - prefixes will be freed by kernel upon test exit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In theory, it's nice to have virFileWrapperAddPrefix() return a
value that indicates if the function succeeded or not. But in
practice, nobody checks for that and in fact blindly believes
that the function succeeded. Therefore, make the function return
nothing and just abort() if it would fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
With only a couple minor tweaks, we can make the existing
doCapsTest() functions with testQemuCapsIterate() and finally
remove the need to manually adjust the test programs every time
a new input file is introduced; moreover, this means that the
two lists can't possibly get out of sync anymore.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This function iterates over a directory containing
capabilities-related data, extract some useful bits of
information from the file name, and calls a user-provided
callback.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
We're not using any of the functionality offered by the
module at the moment, but we will in just a second.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This removes the awkard escaping and will allow us to perform
some more refactoring later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
We're using static string concatenation at the moment, but
that will no longer be a possibility in a bit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This removes a little duplication right away, and will allow
us to avoid introducing more later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This is not particularly useful right now, but will allow us
to refactor some functionality later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
These functions don't do anything too interesting right now,
but will be extended later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1564270
Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.
At the same time, introduce bunch of tests to test the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Test firmware description parsing so far.
The test files come from three locations:
1) ovmf-sb-keys.json and ovmf-sb.json come from OVMF
package from RHEL-7 (with slight name change to reflect their
features in filename too),
2) bios.json and aavmf.json come from example JSON documents from
firmware.json from qemu's git (3a0adfc9bf),
3) ovmf.json is then copied from ovmf-sb.json and stripped
of SECURE_BOOT and REQUIRES_SMM flags, OVMF path change,
description update and machine type expanded for both pc and q35
machine types.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This is going to extend virDomainLoader enum. The reason is that
once loader path is NULL its type makes no sense. However, since
value of zero corresponds to VIR_DOMAIN_LOADER_TYPE_ROM the
following XML would be produced:
<os>
<loader type='rom'/>
...
</os>
To solve this, introduce VIR_DOMAIN_LOADER_TYPE_NONE which would
correspond to value of zero and then use post parse callback to
set the default loader type to 'rom' if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In qemuxml2xmltest, both activeVcpus and blockjobs members
of the testInfo struct have been entirely unused ever since
commit d1a7fc8bb3.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
So far we are providing the suppressions file with a relative
path to valgrind. This apparently doesn't work on some distros
like Ubuntu and its derivates. Providing the absolute path fixes
the problem.
Signed-off-by: Shotaro Gotanda <g.sho1500@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The existing behavior for ppc64 guests is to always add a USB
keyboard and mouse combo if graphics are present; unfortunately,
this means any attempt to use a USB tablet will cause both pointing
devices to show up in the guest, which in turn will result in poor
user experience.
We can't just stop adding the USB mouse or start adding a USB tablet
instead, because existing applications and users might rely on the
current behavior; however, we can avoid adding the USB mouse if a USB
tablet is already present, thus allowing users and applications to
create guests that contain a single pointing device.
https://bugzilla.redhat.com/show_bug.cgi?id=1683681
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These are similar to the existing simple headless guests, but
also include a graphical output and some input devices.
Input files were generated by running
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics vnc \
--print-xml
followed by minor tweaks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
While the parser and schema have to accept all possible models,
virtio-(non-)transitional models are only applicable to
type=passthrough and should be otherwise rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If we pass XML to virDomainDefineXML API with these two elements:
...
<title></title>
<description></description>
...
libvirt correctly ignores these two elements and they will not appear
in the parsed XML.
However, if we use virDomainSetMetadata API and with "" as value for
title or description we will end up with the parsed XML that contains
these empty elements.
Let's fix the behavior of this API to behave the same as
virDomainDefineXML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1518042
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
virDomainSnapshotDefFormat currently takes two sets of knobs:
an 'unsigned int flags' argument that can currently just be
VIR_DOMAIN_DEF_FORMAT_SECURE, and an 'int internal' argument used as
a bool to determine whether to output an additional element. It
then reuses the 'flags' knob to call into virDomainDefFormatInternal(),
which takes a different set of flags. In fact, prior to commit 0ecd6851
(1.2.12), the 'flags' argument actually took the public
VIR_DOMAIN_XML_SECURE, which was even more confusing. Let's borrow
from the style of that earlier commit, by introducing a function
for translating from the public flags (VIR_DOMAIN_SNAPSHOT_XML_SECURE
was just recently introduced) into a new enum specific to snapshot
formatting, and adjust all callers to use snapshot-specific enum
values when formatting, and where the formatter now uses a new
variable 'domainflags' to make it obvious when we are translating
from snapshot flags back to domain flags. We don't even have to
use the conversion function for drivers that don't accept the
public VIR_DOMAIN_SNAPSHOT_XML_SECURE flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
While this function is not, strictly speaking, a predicate,
it still mostly behaves like one as evidenced by the vast
majority of its callers, so using bool rather than int as
the return type makes sense.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It may happen that both symbols are present. Especially when
chaining mocks. For instance if a test is using virpcimock and
then both stat and __xstat would be present in the address space
as virpcimock implements both. Then, if the test would try to use
say virfilewrapper (which again uses VIR_MOCK_REAL_INIT_ALT() to
init real_stat and real___xstat) it would find stat() from
virpcimock and stop there. The virfilewrapper.c:real___xstat
wouldn't be initialized and thus it may result in a segfault.
The reason for segfault is that sys/stat.h may redefine stat() to
call __xstat().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Capabilities should not duplicate data that are obvious from our
documentation and will not change with different QEMU binaries
or the way how we compile libvirt.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When dealing with internal paths we don't need to worry about
whether or not suffixes are lowercase since we have full control
over them, which means we can avoid performing case-insensitive
string comparisons.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
In addition to the obvious s/File/String/, also tweak the name
to make it clear that the presence of the suffix is verified
using case-insensitive comparison.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Add a new test for the storage pool capabilities. There will be
one test mocked with every backend available (full) and one where
only the file system pool is available.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Define a schema for the storage pool capabilities along with
a test to show the general format.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The sheepdog pool is documented as not using the volume type,
so let's just remove it. Besides it would have produced bad
results since the defaultType is FILE but the formatting used
the Disk types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
If none of the 'capabilities' features are enabled we'd still format the
opening and closing tag for the <capabilities element.
The implementation is suboptimal but will be refactored for a better
approach. This is done prior to the refactor to show that tests are not
impacted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes several CPUs which were incorrectly detected as
Skylake-Client.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes several CPUs which were incorrectly detected as a different
CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The signature computation code is not too complicated and it will likely
never change so testing it is not very important. We do it mostly for a
nice side effect of easily accessible signature numbers for all CPU
data files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tests/cputestdata/cpu-parse.sh would produce JSON files with QEMU
replies which wouldn't pass syntax-check. Let's fix this by not emitting
an extra new line after reformatting the JSON file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some test cases are only executed using WHEN_INACTIVE, and the
output file name should reflect this for clarity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a few cases where we are using either WHEN_ACTIVE
or WHEN_INACTIVE even though WHEN_BOTH would work perfectly
fine: for those, start using the simpler DO_TEST() macro.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
disk-mirror-old has different output file for the active and
inactive parts, which should be named accordingly; on the other
hand, both output files for disk-backing-chains-noindex are
identical, so it makes sense to only keep around one and remove
the (in-)active suffix.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add <controller type='scsi' model handling for virtio transitional
devices. Ex:
<controller type='scsi' model='virtio-transitional'/>
* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"
The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<filesystem> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-9p-pci-{non-}traditional in qemu, let's add a standard
model= attribute. The accepted values are:
- virtio
- virtio-transitional
- virtio-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
qemu vhost-scsi devices map to XML roughly like:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn=X/>
</hostdev>
To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.
Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add new <disk> model values for virtio transitional devices. When
combined with bus='virtio':
* "virtio-transitional" maps to qemu "virtio-blk-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-blk-pci-non-transitional"
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.
Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a single QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL that
will be set if any of the following qemu devices are found:
virtio-blk-pci-transitional
virtio-blk-pci-non-transitional
virtio-net-pci-transitional
virtio-net-pci-non-transitional
vhost-scsi-pci-transitional
vhost-scsi-pci-non-transitional
virtio-rng-pci-transitional
virtio-rng-pci-non-transitional
virtio-9p-pci-transitional
virtio-9p-pci-non-transitional
virtio-balloon-pci-transitional
virtio-balloon-pci-non-transitional
vhost-vsock-pci-transitional
vhost-vsock-pci-non-transitional
virtio-input-host-pci-transitional
virtio-input-host-pci-non-transitional
virtio-scsi-pci-transitional
virtio-scsi-pci-non-transitional
virtio-serial-pci-transitional
virtio-serial-pci-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The previous patch made it possible to split multiple commands by
adding newline, but not to split a long single command. The sequence
backslash-newline was being used as if it were a quoted newline
character, rather than completely elided the way the shell does.
Again, add more tests, although this time it seems more like I am
suffering from a leaning-toothpick syndrome with all the \.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
I wanted to do a demonstration with virsh batch mode, which
takes multiple commands all packed into a single argument:
$ virsh -c test:///default 'echo a; echo b;'
a
b
but that produced a really long line, so I tried to make it
more legible:
$ virsh -c test:///default '
echo a;
echo b;
'
error: unknown command: '
'
Let's be more like the shell, and treat unquoted newline as a
command separator just as we do for semicolon. In fact, with
that, I can even now mix styles:
$ virsh -c test:///default '
echo a; echo b
echo c
'
a
b
c
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Added GPFS as shared file system recognized during live migration
security checks.
GPFS is 'IBM General Parallel File System' also called
'IBM Spectrum Scale'
BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1679528
Signed-off-by: Diego Michelotto <diego.michelotto@cnaf.infn.it>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Implement the MSRs ignore unknown reads and writes feature
that's specified using:
<features>
...
<msrs unknown='ignore'>
...
</features>
in the domain XML.
In bhyve, it's just passing '-w' command line argument to the bhyve(8)
executable.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The tests/cputestdata/cpu-parse.sh script has been broken since the
cpu_map.xml file was split into several XMLs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virBuffer is almost always stack-allocated, but requires freeing of the
internals on error. Introduce a VIR_AUTOCLEAN function to deal with
this.
Along with the addition add a test which would leak the buffer contents
if it weren't autocleaned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The messages reference testBufEscapeN instead of testBufEscapeRegex.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
dnsmasq documentation says that the *IPv4* prefix/network
address/broadcast address sent to dhcp clients will be automatically
determined by dnsmasq by looking at the interface it's listening on,
so the original libvirt code did not add a netmask to the dnsmasq
commandline (or later, the dnsmasq conf file).
For *IPv6* however, dnsmasq apparently cannot automatically determine
the prefix (functionally the same as a netmask), and it must be
explicitly provided in the conf file (as a part of the dhcp-range
option). So many years after IPv4 DHCP support had been added, when
IPv6 dhcp support was added the prefix was included at the end of the
dhcp-range setting, but only for IPv6.
A user had reported a bug on a host where one of the interfaces was a
superset of the libvirt network where dhcp is needed (e.g., the host's
ethernet is 10.0.0.20/8, and the libvirt network is 10.10.0.1/24). For
some reason dnsmasq was supplying the netmask for the /8 network to
clients requesting an address on the /24 interface.
This seems like a bug in dnsmasq, but even if/when it gets fixed
there, it looks like there is no harm in just always adding the
netmask to all IPv4 dhcp-range options similar to how prefix is added
to all IPv6 dhcp-range options.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently, some arguments are called strcontent and strsrc, or
content and src or some other combination. This makes it
impossible to see at the first glance what argument is supposed
to represent 'expected' value and which one represents 'actual'
value. Rename the arguments to make it obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current naming makes it hard for me to see which holds the
expected value and which holds the actual value. Rename them to
make it obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to save a few lines of code, and also since it's hype
let's use VIR_AUTOFREE() for the two strings we allocate there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuProcessQMPStart starts a QEMU process and monitor connection that
can be used by multiple functions possibly for multiple QMP commands.
The QMP exchange to exit capabilities negotiation mode and enter command
mode can only be performed once after the monitor connection is
established.
Move responsibility for entering QMP command mode into the
qemuProcessQMP code so multiple functions can issue QMP commands in
arbitrary orders.
This also simplifies the functions using the connection provided by
qemuProcessQMPStart to issue QMP commands.
Test code now needs to call qemuMonitorSetCapabilities to send the
message to switch to command mode because the test code does not use the
qemuProcessQMP command that internally calls qemuMonitorSetCapabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that virStorageSource is a subclass of virObject we can use
virObjectUnref and remove virStorageSourceFree which was a thin wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since virStorageSource is now a subclass of virObject, we can use
VIR_AUTOUNREF instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add virStorageSourceNew and refactor places allocating that structure to
use the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
On some very basic installations (e.g. some container images) the
modprobe binary might be missing. If that is the case, don't fail
virkmodtest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Previous two commits demonstrate a hole in our test scenario.
Fix that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduced by d86c876a66.
There is no real need to have "user-" prefix for chardev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only one path will consume the @def; otherwise, we need to free it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit a7424faff QMP is always used.
Also, commit 932534e8 removed the last use of this apart from:
* parsing/formatting this in the caps cache
* using it as a temporary variable to know when to report an error
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Trivially implement this by deleting the bogus check in
vshTableSafeEncode.
Now it returns an empty string for an empty string instead
of returning NULL without setting an error.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Mock out libxlCapsHasPVUSB to always return true, so test results
aren't dependent on host libxl version
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows us to mock functions in the libxl driver, like
is already possible for the qemu driver
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Every other mock library is named ending in mock.c, move
virmocklibxl.c to follow that pattern
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
DO_TEST_ATTACH and DO_TEST_ATTACH_EVENT now do the same thing so we can
remove the latter including the infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Currently all supported qemu versions now have support for the
DEVICE_DELETED event. This means that testing the old approach is a
waste of time.
Always add the QEMU_CAPS_DEVICE_DEL_EVENT capability in the hotplug test
and fix existing test cases.
The 'disk-virtio', 'disk-usb', 'disk-scsi', and 'disk-scsi-2' already
had variants that used the event, so the non-event variants will be
removed.
For all other cases the QMP_DEVICE_DELETED macro is used to add the
correct reply.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This variant is unused as we create the object including capabilities
with DO_TEST_ATTACH_EVENT, which is then reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU accidentally exposed the id of -drive (or same value as disk
serial, if provided) in one of the identifiers visible from the guest.
To avoid regression in case when -blockdev will be used we need to
always specify it ourselves.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The property allows to control the guest-visible content of the vendor
specific designator of the 'Device Identification' page of a SCSI
device's VPD (vital product data).
QEMU was leaking the id string of -drive as the value if the 'serial' of
the disk was not specified. Switching to -blockdev would impose an ABI
change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Based on qemu commit 'v3.1.0-1445-ga61faa3d02'. Will allow checking
for the scsi 'device_id' property.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Upcoming addition of a new field will need to make sure that SCSI disk
serial is tested as well. Add a case to one of the existing tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For SCSI, IDE, and AHCI cdroms the appropriate device types which select
the correct media are used. In qemu there's one other code path that
looks at -drive media=cdrom in the XEN pv code. Thankfully we don't
support it with qemu (see qemuBuildDiskDeviceStr). All other devices
ignore it as the comment states, thus we can drop that code.
The test fallout is expectedly only in the test added for uncommon cdrom
types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add full and empty cdroms on 'usb' and 'sd' bus to have test
coverage. Note that this does not guarantee that qemu will accept them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Attempting to create an empty virtio-blk drive results into:
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0xc,drive=drive-virtio-disk1,id=virtio-disk1: Device needs media, but drive is empty
Attempting to eject media from virtio-blk based drive results into:
error: internal error: unable to execute QEMU command 'eject': Device 'drive-virtio-disk0' is not removable
Forbid configurations where users would attempt to use cdroms in virtio
bus.
Fix few wrong examples which are not really relevant to the tested code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.
Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of scsi-disk into the two separate devices was introduced by
qemu commit b443ae67 released in qemu v0.15.
All changes to test files are not really related to disk testing thanks
to previous refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The tests are for the same feature. Move all the cases to 'disk-shared'
case as it's already using DO_TEST_CAPS_LATEST
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
A lot of code with no real impact and popularity. Remove all the helpers
now that the only test case is gone.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Testing that the cachemode is properly recorded to the configuration
after startup does not add much value and overcomplicates the xml2argv
test.
Remove the 'disk-shared' test with old capabilities as the test with
real capabilities covers the code sufficiently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Using an old strict set of capabilities is not of much use if a code
path would select a more modern controller by accident.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that we have a specific test for testing the 'virtio-scsi'
controller and other tests which test a combination of scsi and non-scsi
devices this test no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit a4cda054e7 we are using 'ide-hd' and 'ide-cd' instead of
'ide-drive'. We also should probe capabilities for 'ide-hd' instead of
'ide-drive'. It is safe to do as 'ide-drive' is the common denominator
of both 'ide-hd' and 'ide-cd' so all the properties were common.
For now the test data are modified by just changing the appropriate type
when probing for caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit 02e8d0cfdf we are using 'scsi-hd' and 'scsi-cd' instead of
'scsi-disk'. We also should probe capabilities for 'scsi-hd' instead of
'scsi-disk'. It is safe to do as 'scsi-disk' is the common denominator
of both 'scsi-hd' and 'scsi-cd' so all the properties were common.
For now the test data are modified by just changing the appropriate type
when probing for caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To avoid changes to the filled in microcode in case we change the caps
replies file for any reason make the number depend on the filename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Turns out different versions of QEMU on the same architecture
produce the same output, so we can have a single output file
per architecture instead of duplicating the same data over and
over again.
Spotted-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Storage pools might want to specify format of the image when translating
the volume thus we can't add any default format when parsing the XML.
Add a explicit format when starting the VM and format is not present
neither by user specifying it nor by the storage pool translation
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Post parse callback adds the 'raw' type only for local files. Remote
files can also have backing store (even local) so we should do this also
for network backed storage.
Note that virStorageFileGetMetadata always considers files with no type
as raw so we will not accidentally traverse the backing chain and allow
unexpected files being labelled with svirt labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify some existing tests of network-based disks to omit the storage
format specification.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit f80eae8c2a I was too agresive in removing properties of
-drive for empty drives. It turns out that qemu actually persists the
state of 'readonly' and the throttling information even for the empty
drive.
Removing 'readonly' thus made qemu open any subsequent images added via
the 'change' command as RW which was forbidden by selinux thanks to the
restrictive sVirt label for readonly media.
Fix this by formating the property again and bump the tests and leave a
note detailing why the rest of the properties needs to be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.
Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Since we're setting the zone anyway, it will be useful to allow
setting a different (custom) zone for each network. This will be done
by adding a "zone" attribute to the "bridge" element, e.g.:
...
<bridge name='virbr0' zone='myzone'/>
...
If a zone is specified in the config and it can't be honored, this
will be an error.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation for adding several other firewalld-specific functions,
separate the code that's unique to firewalld from the more-generic
"firewall" file.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit fb0d0d6c54 added capabilities data and updated
qemucapabilitiestest but forgot to update qemucaps2xmltest
at the same time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This shows users can now use PCI for RISC-V guests, as long
as they opt into it by manually assigning addresses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This adds an additional directive to the dnsmasq configuration file that
notifies clients via dhcp about the link's MTU. Guests can then choose
adjust their link accordingly.
Signed-off-by: Casey Callendrello <cdc@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This test relies on namespace support, which is only compiled in
if we have the 'fs' and 'netfs' backends.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Instead of repeating the same platform for every test,
set it once, since we do the same tests with the same
input for all platforms, it's just the output that differs.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Only run the pool-netfs-ns-mountopts if built WITH_STORAGE_FS and only
run pool-rbd-ns-configopts if built with WITH_STORAGE_RBD since the
namespace support is only enabled if the pool is enabled.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The custom namespaces were originally registered against the storage
pool source struct, but during review this was changed to the top level
storage pool struct. The namespace URIs were not updated to match, so
had a redundant '/source' component.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit f2f84b4d4 added storagepoolxml2argvtest processing; however,
it didn't follow alter the else to !WITH_STORAGE and add the source
itself to the EXTRA_DIST like the other WITH_STORAGE options for
virstorageutiltest and storagevolxml2argvtest.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 7a227688a caused a build failure on mingw. Following
other uses of including ../src/libvirt_driver_storage_impl.la
I moved to under the WITH_STORAGE conditional.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Allow for adjustment of RBD configuration options via Storage
Pool XML Namespace adjustments. When namespace arguments are
used to start the pool, add a VIR_WARN to indicate that the
startup was tainted by custom config_opts.
Based off original patch/concept:
https://www.redhat.com/archives/libvir-list/2014-May/msg00940.html
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If the Storage Pool Namespace XML data exists, format the mount
options on the MOUNT command line and issue a VIR_WARN to indicate
that the storage pool was tainted by custom mount_opts.
When the pool is started, the options will be generated on the
command line along with the options already defined.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the virStoragePoolFSMountOptionsDef to be used to
manage the Storage Pool XML Namespace for mount options.
Using a new virStorageBackendNamespaceInit function, set the
virStoragePoolXMLNamespace into the _virStoragePoolOptions when
the storage backend is loaded.
Modify the storagepool.rng to allow for the usage of a different
XML namespace to parse the fs_mount_opts to be included with
the fs and netfs storage pool definitions.
Modify the storagepoolxml2xmltest to utilize a properly modified
XML file to parse and format the namespace for a netfs storage pool.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If protocolVer present, add the -o nfsvers=# to the command
line for the NFS Storage Pool
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an optional way to define which NFS Server version will be
used to content the target NFS server.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1584663
Modify the command generation to add some default options to the
fs/netfs storage pools based on the OS type. For Linux, it'll be
the "nodev, nosuid, noexec". For FreeBSD, it'll be "nosuid, noexec".
For others, just leave the options alone.
Modify the storagepoolxml2argvtest to handle the fact that the
same input XML could generate different output XML based on whether
Linux, FreeBSD, or other was being built.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some of the query callbacks want to know the firewall layer that was
being used for triggering the query to avoid duplicating that data.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1665553
Ceph can be mounted just like any other filesystem and in fact is
a shared and cluster filesystem. The filesystem magic constant
was taken from kernel sources as it is not in magic.h yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:
@ rule1 @
identifier a, b;
@@
- b = a;
...
- a = NULL;
+ VIR_STEAL_PTR(b, a);
Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Implement support for passing custom command line arguments
to bhyve using the 'bhyve:commandline' element:
<bhyve:commandline>
<bhyve:arg value='-newarg'/>
</bhyve:commandline>
* Define virDomainXMLNamespace for the bhyve driver, which
at this point supports only the 'commandline' element
described above,
* Update command generation code to inject these command line
arguments between driver-generated arguments and the vmname
positional argument.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move the rng->model == VIRTIO check to parse time. This also
allows us to remove similar checks throughout the qemu driver
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This will be extended in the future, so let's simplify things by
centralizing the checks.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This adds the virt-aa-helper support for gl enabled graphics devices to
generate rules for the needed rendernode paths.
Example in domain xml:
<graphics type='spice'>
<gl enable='yes' rendernode='/dev/dri/bar'/>
</graphics>
results in:
"/dev/dri/bar" rw,
Special cases are:
- multiple devices with rendernodes -> all are added
- non explicit rendernodes -> follow recently added virHostGetDRMRenderNode
- rendernode without opengl (in egl-headless for example) -> still add
the node
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1757085
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Use the password stored in the secret driver under
the uuid specified by the vnc_tls_x509_secret_uuid
option in qemu.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=1602418
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The next release of QEMU is going to be 4.0.0. A bit early, but
this adds capabilities data for x86_64 from current qemu git
15bede554162dda822cd762c689edb6fa32b6e3b
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
If a -drive has no image, using image properties makes qemu whine that
they should not be used.
This patch stops formating cache/readonly/... for empty drives
for the pre-blockdev syntax. Unfortunately those parameters can't be
added later when inserting media, but on the other hand qemu will start
with an empty drive.
Since we already were able to start a VM with such config previously due
to qemu ignoring them I've opted just to skip formatting them.
Additionally with -blockdev support it will work as expected as the
image properties will be formatted when adding the image itself which is
not possible without it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1651457
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Upcomming change will influence CDROM with cache mode so add a test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The feature was added to QEMU in 3.1.0 and it is currently blocking
migration, which is expected to change in the future. Luckily 3.1.0 is
new enough to give us migratability hints on each feature via
query-cpu-model-expension, which means we don't need to use the
"migratable" attribute on the CPU map XML.
The kernel calls this feature arch_capabilities and RHEL/CentOS 7.* use
arch-facilities. Apparently some CPU test files were gathered with the
RHEL version of QEMU. Let's update the test files to avoid possible
confusion about the correct naming.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our use of INCLUDES in Makefile.am hearkens back to when we had to
cater to automake 1.9.6 (thanks, RHEL 5) which lacked AM_CPPFLAGS.
Modern Automake flags a warning that INCLUDES is deprecated, and
now that we mandate RHEL 7 or better (see commit c1bc9c66), we no
longer have to cater to the old spelling. This change will also
make it easier to do per-binary CPPFLAGS.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit c0a8ea45 removed the use of gettextize, and the setting of
GETTEXT_CPPFLAGS, but did not scrub the now-unused variable from
Makefile.am snippets.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
According to the result parsing from xml, add the unarmed property
into QEMU command line:
-device nvdimm,...[,unarmed=on]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to the result parsing from xml, add pmem property
into QEMU command line:
-object memory-backend-file,...[,pmem=on]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to the result parsing from xml, add align property
into QEMU command line:
-object memory-backend-file,...[,align=xxx]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Deprecate DO_TEST to do nvdimm qemuxml2argvdata tests, because
DO_TEST_CAPS_LATEST is a better choice. The DO_TEST needs
to specify all qemu capabilities and is not easy for scaling.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability tracks if nvdimm has the unarmed attribute or not
for the nvdimm readonly xml attribute.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability tracks if memory-backend-file has the pmem
attribute or not.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability tracks if memory-backend-file has the align
attribute or not.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:
<devices>
...
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/dax0.0</path>
<alignsize unit='MiB'>2</alignsize>
</source>
<target>
<size unit='MiB'>4094</size>
<node>0</node>
<label>
<size unit='MiB'>2</size>
</label>
</target>
</memory>
...
</devices>
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This test checks if security label remembering works correctly.
It uses qemuSecurity* APIs to do that. And some mocking (even
though it's not real mocking as we are used to from other tests
like virpcitest). So far, only DAC driver is tested.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add guards to avoid calling strchr when @err_noinfo == NULL or
calling virErrorTestMsgFormatInfoOne when @err_info == NULL as
both would fail with a NULL deref.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
If an editor has an XML file open, it may create a temporary . file. The
existance of this file will cause the virschematest to fail, so just
skip these editor temp files.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU command line arguments are very long and currently all written
on a single line to /var/log/libvirt/qemu/$GUEST.log. This introduces
logic to add line breaks after every env variable and "-" optional
argument, and every positional argument. This will create a clearer log
file, which will in turn present better in bug reports when people cut +
paste from the log into a bug comment.
An example log file entry now looks like this:
2018-12-14 12:57:03.677+0000: starting up libvirt version: 5.0.0, qemu version: 3.0.0qemu-3.0.0-1.fc29, kernel: 4.19.5-300.fc29.x86_64, hostname: localhost.localdomain
LC_ALL=C \
PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin \
HOME=/home/berrange \
USER=berrange \
LOGNAME=berrange \
QEMU_AUDIO_DRV=none \
/usr/bin/qemu-system-ppc64 \
-name guest=guest,debug-threads=on \
-S \
-object secret,id=masterKey0,format=raw,file=/home/berrange/.config/libvirt/qemu/lib/domain-33-guest/master-key.aes \
-machine pseries-2.10,accel=tcg,usb=off,dump-guest-core=off \
-m 1024 \
-realtime mlock=off \
-smp 1,sockets=1,cores=1,threads=1 \
-uuid c8a74977-ab18-41d0-ae3b-4041c7fffbcd \
-display none \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=23,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-no-shutdown \
-boot strict=on \
-device qemu-xhci,id=usb,bus=pci.0,addr=0x1 \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on
2018-12-14 12:57:03.730+0000: shutting down, reason=failed
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virCommand APIs do not expect to be given a NULL value for an arg
name or value. Such a mistake can lead to execution of the wrong
command, as the NULL may prematurely terminate the list of args.
Detect this and report suitable error messages.
This identified a flaw in the storage test which was passing a NULL
instead of the volume path. This flaw was then validated by an incorrect
set of qemu-img args as expected data.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Make sure that we don't add any broken error message strings any more.
This ensures that both the version with and without additional info is
populated, the version without info does not have any formatting
modifiers and the version with info has exactly one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a syntax-check script that validates header files use a
common layout:
/*
...copyright header...
*/
<one blank line>
#ifndef SYMBOL
# define SYMBOL
....content....
#endif /* SYMBOL */
For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:
#ifndef SYMBOL_ALLOW
# error ....
#endif /* SYMBOL_ALLOW */
<one blank line>
The many mistakes this script identifies are then fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Turns out there some build platforms that must not define MOUNT
or VGCHANGE in config.h... So moving the commands from the storage
backend specific module into a common storage_util module causes
issues for those platforms.
So instead of assuming they are there, let's just pass the command
string to the storage util API's from the storage backend specific
code (as would have been successful before). Also modify the test
to determine whether the MOUNT and/or VGCHANGE doesn't exist and
just define it to (for example) what Fedora has for the path. Could
have just used "mount" and "vgchange" in the call, but that defeats
the purpose of adding the call to virTestClearCommandPath.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1656255
If virSecretGetSecretString is using by secretLookupByUUID,
then it's possible the found sec->usageType doesn't match the
desired @secretUsageType. If this occurs for the encrypted
volume creation processing and a subsequent pool refresh is
executed, then the secret used to create the volume will not
be found by the storageBackendLoadDefaultSecrets which expects
to find secrets by VIR_SECRET_USAGE_TYPE_VOLUME.
Add a check to virSecretGetSecretString to avoid the possibility
along with an error indicating the incorrect matched types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add the logical storage pool startup validation (xml2argv) tests.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Cover the case where @netauto would be used to create the command
line in virStorageBackendFileSystemMountCmd. Essentially when the
pool type is "netfs", but the "source.format" is empty, create the
command line properly.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Similar to qemuxml2argv and storagevolxml2argv, let's create some
tests to ensure that the XML generates a consistent command line.
Using the same list of pools as storagepoolxml2xmltest, start with
the file system tests (fs, netfs, netfs-cifs, netfs-gluster).
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1624223
There are two ways to request memory preallocation on cmd line:
-mem-prealloc and .prealloc attribute for a memory-backend-file.
However, as it turns out it's not safe to use both at the same
time. If -mem-prealloc is used then qemu will fully allocate the
memory (this is done by actually touching every page that has
been allocated). Then, if .prealloc=yes is specified,
mbind(flags = MPOL_MF_STRICT | MPOL_MF_MOVE) is called which:
a) has to (possibly) move the memory to a different NUMA node,
b) can have no effect when hugepages are in play (thus ignoring user
request to place memory on desired NUMA nodes).
Prefer -mem-prealloc as it is more backward compatible
compared to switching to "-numa node,memdev= + -object
memory-backend-file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The QEMU validation code for graphics has been in place for a while, but
because it is only executed from virDomainDeviceInfoIterateInternal, it
was never run, since the iterator expects the device to have boot info
which graphics don't have. The unfortunate side effect of this whole mess
was that a few capabilities were missing from the test suite (as commit
d8266ebe1 demonstrated with graphics-spice-invalid-egl-headless test),
which in turn meant that a few graphics tests which expected a failure
happily accepted any failure the test runtime returned which made them
succeed. The impact of this was that we then allowed to start a domain
with multiple OpenGL-enabled graphics devices.
This patch enables iteration over graphics devices. Unsurprisingly,
a few tests started to fail as a result, so fix those too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It's fairly easy to forget to add a capability to the list of
capabilities for a negative test case which might yield (for us) very
unfortunate results. Therefore, introduce negative versions of
DO_TEST_CAPS_LATEST macros, so that real QEMU caps can be used with
tests that expect a failure too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This commit includes a test case for multiple network definitions. It is
useful right now, but it will be more useful when the index used by LXC
version 3.X is implemented to support this new settings. The version 3.X
is using indexes to specify each network settings.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The networkxml2firewalltest sets virCommand to dry run mode but doesn't
provide a callback to fill in stdout/stderr. As a result when the
firewall code queries rules it gets a NULL output and so never triggers
the callback to process output.
This trivial change just returns an empty string for the command output
in order to ensure the callback gets triggered. It has no effect right
now, but in future patches this will trigger greater test coverage.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for converting openvswitch interface configuration
to/from libvirt domXML and xl.cfg(5). The xl config syntax for
virtual interfaces is described in detail in the
xl-network-configuration(5) man page. The Xen Networking wiki
also contains information and examples for using openvswitch
in xl.cfg config format
https://wiki.xenproject.org/wiki/Xen_Networking#Open_vSwitch
Tests are added to check conversions of openvswitch tagged and
trunked VLAN configuration.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the disk from tests focusing on other aspects so that change to
-blockdev will touch less tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add markers for allowing test debugging if one of the steps fails
without setting a proper error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Depending on whether QEMU actually supports the option, we can put the
'rendernode' on the '-display egl-headless' cmdline.
https://bugzilla.redhat.com/show_bug.cgi?id=1628892
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have QAPI introspection of display types in QEMU upstream,
we can check whether the 'rendernode' option is supported with
egl-headless display type.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Up until now, we formatted 'rendernode=' onto QEMU cmdline only if the
user specified it in the XML, otherwise we let QEMU do it for us. This
causes permission issues because by default the /dev/dri/renderDX
permissions are as follows:
crw-rw----. 1 root video
There's literally no reason why it shouldn't be libvirt picking the DRM
render node instead of QEMU, that way (and because we're using
namespaces by default), we can safely relabel the device within the
namespace.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for armv6l qemu guests has been added.
Tested with arm1176 CPU on x86.
Signed-off-by: Stefan Schallenberg <infos@nafets.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commits d7434ae800 and 9c4afbda34 added replies files for
QEMU 3.0.0 on s390x and QEMU 3.1.0 on x86_64 respectively, but
only enabled the corresponding test in qemucapabilities and not
in qemucaps2xml.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Handle PVH domain type in both directions (xen-xl->xml, xml->xen-xl).
And add a test for it.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
builder="hvm" is deprecated since Xen 4.10, new syntax is type="hvm" (or
type="pv", which is default). Since the old one is still supported,
still use it when writing native config, so the config will work on
older Xen too (and will also not complicate tests).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Add a capability check for IOThread polling (all were added at the
same time, so only one check is necessary).
Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
with the only changes to include the more recent QEMU releases.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new memoryBacking source type "memfd", supported by QEMU (when
the capability is available).
A memfd is a specialized anonymous memory kind. As such, an anonymous
source type could be automatically using a memfd. However, there are
some complications when migrating from different memory backends in
qemu (mainly due to the internal object naming at this point, but
there could be more). For now, it is simpler and safer to simply
introduce a new source type "memfd". Eventually, the "anonymous" type
could learn to use memfd transparently in a separate change.
The main benefits are that it doesn't need to create filesystem files,
and it also enforces sealing, providing a bit more safety.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 3.1 should only expose the property if the host is actually
capable of creating hugetable-backed memfd. However, it may fail
at runtime depending on requested "hugetlbsize".
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add new functions to generate zPCI command string and append it to
QEMU command line. And the related tests are added.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We should ensure that QEMU supports zPCI when a zPCI address is defined
in XML and otherwise report an error. This patch introduces a generic
validation function qemuDomainDeviceDefValidateAddress() which calls
qemuDomainDeviceDefValidateZPCIAddress() if address type is PCI address.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let's introduce zPCI capability.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
QEMU 3.1 supports Hyper-V-style PV IPIs making it cheaper for Windows
guests to send an IPI, especially when it targets many CPUs.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
This commit includes new test cases to cover LXC version 3.0 and higher.
This LXC version rebased some settings entries and deprecated other ones.
As we support both, we should include tests to minimize problems with
integration between them.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a test to fetch the GetMemoryStat output. This only gets
data for v1 only right now since the v2 data from commit 61ff6021
is rather useless returning all 0's. The v1 data was originally
added in commit d1452470.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introducing <monitor> element under <cachetune> to represent
a cache monitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit id 5eb61e6846 neglected to change the name in the wrong value
output to virCgroupGetPercpuStats from virCgroupGetMemoryUsage.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1640465
Weirdly enough, there can be symlinks in the path we are trying
to fix. If it is the case our clever algorithm that finds matches
against mount table won't work. Canonicalize path at the
beginning then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632833
When doing a SCSI passthrough we don't put format= onto the
command line. This causes qemu to probe the format automatically
which ends up in a warning in the domain log and possible qemu
disabling writes to the first block (according to the warning
message).
Based-on-work-of: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit ed5aa85f37
qemu: don't use chardev FD passing for vhostuser backend
altered the legacy DO_TEST macro.
Run the test against capabilities of QEMU 2.5.0 (which did not
support QEMU_CAPS_CHARDEV_FD_PASS) as well as the latest version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Test CCID smartcard passthrough from a unix listen socket.
Use the capabilities of QEMU 2.5.0 which did not support
chardev FD passing and the latest one, which (at the time
of this commit) it does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The URI parser used by libvirt does not populate uri->path if the
trailing slash is missing. The code virStorageSourceParseBackingURI
would then not populate src->path.
As only NBD network disks are allowed to have the 'name' field in the
XML defining the disk source omitted we'd generate an invalid XML which
we'd not parse again.
Fix it by populating src->path with an empty string if the uri is
lacking slash.
As pointed out above NBD is special in this case since we actually allow
it being NULL. The URI path is used as export name. Since an empty
export does not make sense the new approach clears the src->path if the
trailing slash is present but nothing else.
Add test cases now to cover all the various cases for NBD and non-NBD
uris as there was to time only 1 test abusing the quirk witout slash for
NBD and all other URIs contained the slash or in case of NBD also the
export name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Commit 4f4c3b13 (v3.3) fixed an issue where performing cleanup of
libvirt objects could sometimes lose error messages, by adding code
to copy the libvirt error into last_error prior to cleanup paths.
However, it caused a regression: on other paths, some errors are now
printed twice, if libvirt still remembers in its thread-local
storage that an error was set even after virsh cleared last_error.
For example:
$ virsh -c test:///default snapshot-delete test blah
error: Domain snapshot not found: no domain snapshot with matching name 'blah'
error: Domain snapshot not found: no domain snapshot with matching name 'blah'
Fix things by telling libvirt to discard any thread-local errors at
the same time virsh prints an error message (whether or not the libvirt
error is the same as what is stored in last_error).
Update the virsh-undefine testsuite (partially reverting portions of
commit b620bdee, by removing -q, to more easily pinpoint which commands
are causing which messages), now that there is only one error message
instead of two.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The mock is built on Linux only. Therefore we should load it only
on Linux too. This fixes the FreeBSD build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are couple of things wrong with the current implementation.
The first one is that in the first loop the code tries to build a
list of fuse.glusterfs mount points. Well, since the strings are
allocated in a temporary buffer and are not duplicated this
results in wrong decision made later in the code.
The second problem is that the code does not take into account
subtree mounts. For instance, if there's a fuse.gluster mounted
at /some/path and another FS mounted at /some/path/subdir the
code would not recognize this subdir mount.
Reported-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If the given path is already a mount point (e.g. a bind mount of
a file, or simply a direct mount point of a FS), then our code
fails to detect that because the first thing it does is cutting
off part after last slash '/'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce some basic test cases for virFileIsSharedFS(). More
will be added later. In order to achieve desired result, mocks
for setmntent() and statfs() need to be invented because the
first thing that virFileIsSharedFS() does is calling the latter.
If it finds a FUSE mount it'll call the former.
The mock might look a bit complicated, but in fact it's quite
simple. The test sets LIBVIRT_MTAB env variable to hold the
absolute path to a file containing mount table. Then, statfs()
returns matching FS it finds, and setmntent() is there just to
replace /proc/mounts with the file the test wants to load.
Adding this test also exposed a bug we have - because we assume
the given path points to a file we cut off what we assume is a
file name to obtain directory path and only then we call
statfs(). This is buggy because the passed path could be already
a mount point.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Because of lacking virTestCounterReset() call, the old test cases
name was preserved.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
-net name= will be deprecated in QEMU 3.1:
commit 101625a4d4ac7e96227a156bc5f6d21a9cc383cd
net: Deprecate the "name" parameter of -net
git describe: v3.0.0-791-g101625a4d4
Use the id option instead, supported since QEMU 1.2:
commit 6687b79d636cd60ed9adb1177d0d946b58fa7717
convert net_client_init() to OptsVisitor
git describe: v1.0-3564-g6687b79d63 contains: v1.2.0-rc0~142^2~8
Thankfully, libvirt only uses -net for non-PCI, non-virtio NICs
on ARM.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
While the idea was good the implementation not so much as we need to
take into account the old disk data and the new source. The code will be
consolidated later in a different way.
This reverts commit 663b1d55de.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
We need to configure multiple env variables for each set of tests so
create helper functions to do that.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to create the cgroup v2 sysfs the same way as we do for
cgroup v1.
This introduces new VIR_CGROUP_MOCK_MODE env variable which will
configure which cgroup mode each test requires. There are three
different modes:
- legacy: only cgroup v1 is available and it's the default mode
- hybrid: both cgroup v1 and cgroup v2 are available and have some
controllers
- unified: only cgroup v2 is available
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove the trailing '/' from prefix. This change is required in order
to introduce tests for unified cgroups. They are usually mounted in
'/sys/fs/cgroup'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It's possible that the @outbuf and/or @errbuf could be NULL
and thus we need to use the right comparison macro.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than initialize actualconfig and expectconfig before
having the possibility that libxlDriverConfigNew could fail
and thus land in cleanup, let's just move them and return
immediately upon failure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
While unlikely, sysconf(_SC_CLK_TCK) could fail leading to
indeterminate results for the subsequent division. So let's
just remove the # define and inline the same change.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The preferred location for setting the nested CPU flag changed in
Xen 4.10 and is advertised via the LIBXL_HAVE_BUILDINFO_NESTED_HVM
define. Commit 95d19cd0 changed libxl to use the new preferred
location but unconditionally changed the tests, causing 'make check'
failures against Xen < 4.10 that do not contain the new location.
Commit e94415d5 fixed the failures by only running the tests when
LIBXL_HAVE_BUILDINFO_NESTED_HVM is defined. Since libvirt supports
several versions of Xen that use the old nested location, it is
prudent to test the flag is set correctly. This patch reintroduces
the tests for the legacy location of the nested setting.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 95d19cd unconditionally adjusted the tests to account for
the conditional move of the nested_hvm setting location.
Run the affected tests only for the new setup (witnessed by
LIBXL_HAVE_BUILDINFO_NESTED_HVM).
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
With the introduction of cgroup v2 there are new names used with
cgroups based on which version is used:
- legacy: cgroup v1
- unified: cgroup v2
- hybrid: cgroup v1 and cgroup v2
Let's use 'legacy' instead of 'cgroupv1' or 'controllers' in our code.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to update one test-case because now new cgroup object will be
created only if there is any cgroup backend available.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will be required once cgroup v2 is introduced. The cgroup
detection is not simple and we will have multiple backends so we
should not just jump into the middle of the detection code.
In order to use virCgroupNewSelf we need to create all the remaining
data files:
- {name}.cgroups represents /proc/cgroups, it is a list of cgroup
controllers compiled into kernel
- {name}.self.cgroup represents /proc/self/cgroup, it describes
cgroups to which the process belongs
For "no-cgroups" we need to modify the expected behavior because
virCgroupNewSelf() will fail if there are no controllers available.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Because we can set which files to return for cgroup tests there
is no need to have special function tailored to run tests.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all the cgroup data into separate files out of vircgroupmock.c
and rework the fopen function to load data from files. This will
make it easier to add more test cases.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If available, use b_info->nested_hvm instead of
b_info->u.hvm.nested_hvm. This will make nested HVM config available
also for PVH domains.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Otherwise starting PVH guest will result in "arch_setup_bootlate:
mapping shared_info failed (pfn=..., rc=-1, errno: 12): Internal error".
After this change the behavior is the same as in `xl`.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Coverity noted that each of the fmemopen called used the strlen value
in order to allocate space, but that neglected space for terminating
null string. So just add 1 to the strlen.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
A bunch of SCSI test cases in qemuxml2argv used
DO_TEST(...
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI,
...);
instead of the intended
DO_TEST(...
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
...);
which is used correctly in qemuxml2xml. Fix them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're only ever passing a single binary when calling this
function, so we can remove all code dealing with the
possibility of a second binary being specified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
virCapabilitiesAddGuestDomain() takes an optional binary
name: this is intended for cases where a certain domain
type can't use the default one registered for the guest
architecture, but has to use a special binary instead.
The current code, however, will pass 'binary' again when
'kvmbin' is not defined, which is unnecessary as 'binary'
has been registered as default earlier, and will result
in capabilities output such as
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<domain type='qemu'/>
<domain type='kvm'>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
</domain>
with the second <emulator> element providing no additional
information.
Change it so that, when 'kvmbin' is not defined, NULL is
passed and so the default emulator will be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch is introducing cache monitor(CMT) to cache and
memory bandwidth monitor(MBM) for monitoring CPU memory
bandwidth.
The host capability of the two monitors is also introduced
in this patch.
For CMT, the host capability is shown like:
<host>
...
<cache>
<bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'>
<control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/>
</bank>
<monitor level='3' 'reuseThreshold'='270336' maxMonitors='176'>
<feature name='llc_occupancy'/>
</monitor>
</cache>
...
</host>
For MBM, the capability is shown like this:
<host>
...
<memory_bandwidth>
<node id='1' cpus='6-11'>
<control granularity='10' min ='10' maxAllocs='4'/>
</node>
<monitor maxMonitors='176'>
<feature name='mbm_total_bytes'/>
<feature name='mbm_local_bytes'/>
</monitor>
</memory_bandwidth>
...
</host>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
The libxl_domain_config_from_json API appeared in Xen 4.5, hence
there is no need to check for its existence after changing the
minimum supported Xen version to 4.6. Remove the check and its
use in the tests.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU commits:
e37a5c7fa4 (v2.12.0)
i386: Add Intel Processor Trace feature support
c2f193b538 (v2.7.0)
target-i386: Add support for UMIP and RDPID CPUID bits
aff9e6e46a (v2.12.0)
x86/cpu: Enable new SSE/AVX/AVX512 cpu features
f77543772d (v2.9.0)
x86: add AVX512_VPOPCNTDQ features
5131dc433d (v3.1.0)
i386: Add CPUID bit for PCONFIG
59a80a19ca (v3.1.0)
i386: Add CPUID bit for WBNOINVD
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Now that we know what metadata lock manager user wishes to use we
can load it when initializing security driver. This is achieved
by adding new argument to virSecurityManagerNewDriver() and
subsequently to all functions that end up calling it.
The cfg.mk change is needed in order to allow lock_manager.h
inclusion in security driver without 'syntax-check' complaining.
This is safe thing to do as locking APIs will always exist (it's
only backend implementation that changes). However, instead of
allowing the include for all other drivers (like cpu, network,
and so on) allow it only for security driver. This will still
trigger the error if including from other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
So far the virLockSpaceAcquireResource() locks the first byte in
the underlying file. But caller might want to lock other range.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The directory has been renamed in 562990849a, but a
reference to it was not updated at the same time, causing
'make dist' to fail ever since. Fix it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
It was already available in 1.5.0.
Moreover, we're not even formatting it on the QEMU command
line, ever: we just use it as part of some logic that decides
whether KVM support should be advertised, and as it turns out
that logic is actually buggy and dropping this capability
fixes it.
https://bugzilla.redhat.com/show_bug.cgi?id=1628469
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
More specifically, everything that's tested by qemucapabilities
now goes through qemucaps2xml as well.
Ideally we'll rewrite both so that listing all test cases is
unnecessary and they get picked up automatically by listing the
contents of the input directory instead, but that's a refactor
for another day :)
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
While qemucaps2xml has a meager two test cases to its name, we
have plenty of data from qemucapabilities which is taken from
actual QEMU binaries, covers pretty much all supported QEMU
versions and architectures and is even in the right format already!
Rewrite qemucaps2xml so that it uses qemucapabilities data as
input. Right now we have a single test case, but we're going to
add a lot more next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
After removing the host CPU model re-computation,
this function is no longer necessary.
This reverts commits:
commit d0498881a0
virQEMUCapsFreeHostCPUModel: Don't always free host cpuData
commit 5276ec712a
testUpdateQEMUCaps: Don't leak host cpuData
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Make it obvious when it is used intentionally and error
out when used in combination with real capabilities.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
None of the things testUpdateQEMUCaps adjusts are applicable
for tests that use the DO_TEST_CAPS macros, i.e.
real QEMU capabilities parsed from the XML files:
The architecture must be chosen before we even open the caps
file, CPU models are already present and the expensive HostModel
computation was already done in virQEMUCapsLoadCache.
Introduce FLAG_REAL_CAPS and skip the whole testUpdateQEMUCaps
function for DO_TEST_CAPS.
This speeds up the test by 25 %
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that the function is only run if requested by
the FLAG_STEAL_VM flag, we know that missing data
is an error, not a request to skip the test.
The existence of the output file is now checked by
virTestCompareToFile, which allows usage of
the VIR_TEST_REGENERATE_OUTPUT=1 env variable
to generate new test cases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use the recently introduced flag as a witness.
This reduces the apparent number of test cases
to the real number of test cases.
Note that this does not suffer from the same problem
as commit 70255fa was fixing, because the condition
for running virTestRun does not depend on results
of previous tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use this macro to indicate the intention to also
run the XML->startup XML test.
It sets the newly introduced FLAG_STEAL_VM flag,
which is the new witness for the XML->argv test
to leave the VM object behind.
This will allow us to report proper errors in
XML->startup tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.
Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.
To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.
This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.
Resolves: https://bugzilla.redhat.com/1601318
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.5.0, which is our
minimum supported QEMU version these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.3.1 and we require
QEMU 1.5.0 these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced by commit <af204232>.
Made redundant by commit 1e9a083 which switched to using
qemuProcessCreatePretendCmd, where capabilities are filtered
in qemuProcessInit after being fetched from the cache.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit 0bdb704 renamed the corresponding xml->argv tests,
but due to the optimistic nature of xml->startup xml testing,
this test was quietly skipped.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1613737
When processing the inputvol for encryption, we need to handle
the case where the inputvol is encrypted. This then allows for
the encrypted inputvol to be used either for an output encrypted
volume or an output volume of some XML provided type.
Add tests to show the various conversion options when either input
or output is encrypted. This includes when both are encrypted.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 39cef12a9 altered/fixed the inputvol processing to create
a multistep process when using an inputvol to create an encrypted
output volume; however, it unnecessarily assumed/restricted the
inputvol to be of 'raw' format only.
Modify the processing code to allow the inputvol format to be checked
and used in order to create the encrypted volume.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 39015a6f3 modified the test to be more reliable/realistic,
but without checking the return status of virEventRunDefaultImpl
it's possible that the test could run infinitely.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Previous commits removed all capabilities from per-device property
probing for:
pci-assign
kvm-pci-assign
usb-host
scsi-generic
Remove them from the virQEMUCapsDeviceProps list and get rid of the
redundant device-list-properties QMP calls.
Note that 'pci-assign' was already useless, because the QMP version
of the device is called 'kvm-pci-assign', see libvirt commit 7257480
from 2012.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit 28b77657 in v1.0-rc4~21^2~8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit c29029d which was included in 1.5.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the bootindex argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the configfd argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Added by commit fc66c1603c and not used since.
Also, the device was present in QEMU 1.5.0 so this capability
will not be needed if we ever decide to implement usb-net support.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Attempting to use a chardev definition like
<serial type='unix'>
<target type='isa-serial'/>
</serial>
correctly results in an error being reported, since the source
path - a required piece of information - is missing; however,
the very similar
<serial type='unix'>
<target type='pci-serial'/>
</serial>
was happily accepted by libvirt, only to result in libvirtd
crashing as soon as the guest was started.
The issue was caused by checking the chardev's targetType
against whitelisted values from virDomainChrChannelTargetType
without first checking the chardev's deviceType to make sure
it is actually a channel, for which the check makes sense,
rather than a different type of chardev.
The only reason this wasn't spotted earlier is that the
whitelisted values just so happen to correspond to USB and
PCI serial devices and Xen and UML consoles respectively,
all of which are fairly uncommon.
https://bugzilla.redhat.com/show_bug.cgi?id=1609720
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A few qemuxml2xml tests for virtio-input devices are
missing the capabilities used for the corresponding
qemuxml2argv tests: this wasn't a problem until now
because capabilities were only checked at command line
generation time, but we're going to change that later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1622455
If a domain is configured to use <source type='file'/> under
<memoryBacking/> we have to honour that setting and produce
-mem-path on the command line. We are not doing so if domain has
no guest NUMA nodes nor hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new tests use DO_TEST_CAPS_ARCH_LATEST() with an input
XML describing a very simple headless guest and cover most
architectures and machine types we care about.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can add aarch64, ppc64 and riscv64 to the list of
supported architectures for the macro, since we have
capabilities data for all of them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-serial is an alias for virtio-serial-pci, which
should not have been used for a PCIe-less aarch64/virt
guest but it ended up being used anyway because the
virtio-mmio capability was missing and the algorithm
is buggy.
Fix the test case so that we can fix the algorithm next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current socket test is rather crazy in that it sets up a server
listening for sockets and then runs a client connect call, relying on
the fact that the kernel will accept this despite the application
not having called accept() yet. It then closes the client socket and
calls accept() on the server. On Linux accept() will always see that
the client has gone and so skip the rest of the code. On FreeBSD,
however, the accept sometimes succeeds, causing us to then go into
code that attempts to read and write to the client which will fail
aborting the test. The accept() never succeeds on FreeBSD guests
with a single CPU, but as you add more CPUs, accept() becomes more and
more likely to succeed, giving a 100% failure rate for the test when
using 8 CPUs.
This completely rewrites the test so that it is avoids this designed in
race condition. We simply spawn a background thread to act as the
client, which will read a byte from the server and write it back again.
The main thread can now properly listen and accept the client in a
synchronous manner avoiding any races.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The test code for UNIX and TCP sockets will need to be rewritten and
extended later, and will benefit from code sharing.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The expected output strings from the vshtabletest.c are created on a
modern Linux host where unicode printing support is very good. On older
Linux platforms, or non-Linux platforms, some unicode characters will
not be considered printable. While the vsh table alignment code will
stil do the right thing with escaping & aligning in this case, the
result will not match the test's expected output.
Since we know the code is working correctly, do a check with iswprint()
to validate the platform's quality and skip the test if it fails. This
fixes the test on FreeBSD platforms.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When switching the host architecture to something for which we do not
have any host CPU model defined, the mocked
virQEMUCapsProbeHostCPUForEmulator would just return the previous CPU
model resulting in strange combinations, such as "core2duo" host CPU
model in QEMU capabilities for "AArch64" architecture. It currently
doesn't break any test case, but we should fix it anyway to avoid future
surprises which would be quite hard to debug.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Test that we correctly accept 64-bit unsigned numbers for QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We expect to get numbers as big as ULLONG_MAX from QEMU,
add a test for them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of printing the whole JSON in error messages,
print just the test name.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This test gets its JSON docs from files.
Now that we have a 'name' field in testInfo, use it instead
of abusing the 'doc' field.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Give the testing function access to the test name instead of only
passing it to virTestRun.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 6534b3c4 tried to raise an error when there is no numa
nodes by setting access='shared' in the domain config, but added
a helper called from qemuDomainDeviceDefValidate instead of a
helper called from qemuDomainDefValidate for XML:
<memoryBacking>
<hugepages/>
<access mode='shared'/>
</memoryBacking>
Since there are no memory devices in the test XML, there would
be no validation failure, but the test added was still failing.
Investigating that it turns out that unnecessary XML elements
were causing the failure (no need for <video>, <graphics>,
<pm>, usb controller model "piix3-uhci", disk attribute for
"discard='unmap'", <serial>, <console>, <channel> and a
memballoon model). Removing all those before moving the method
caused the test to succeed.
So this patch moves the validation to the right place and
removes all the unnecessary XML pieces that were causing
a false validation failure.
https://bugzilla.redhat.com/show_bug.cgi?id=1448149#c14
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The reason of broken build was that centos and rhel use older version of
glibc. These versions of glibc on these platforms cannot work with newer
unicodes, thus causing functions iswprint() and wcwidth() return
unexpected values causing the vshtabletest to fail. Therefore, let's
replace the new unicode characters causing issues with some older ones
to fix the test suite, as the issue would still persist during runtime.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.
The name is based on comments in qemu/hw/riscv/virt.c:
RISC-V machine with 16550a UART and VirtIO MMIO
and in qemu/hw/char/serial.c:
QEMU 16550A UART emulation
along with the output of dmesg in the guest:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
base_baud= 230400) is a 16550A
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The architecture is new enough that we don't need to
concern ourselves with backwards compatibility in any
capacity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the generated testcase to test the generated command against the
QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Many of the parameters are omitted for NULL/0 situations. Change the
values for these cases so all the arguments are schema-checked.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically the argv -> xml convertor wanted the same default machine
as we'd set when parsing xml. The latter has now changed, however, to
use a default defined by libvirt. The former needs fixing to again
honour the default QEMU machine.
This exposed a bug in handling for the aarch64 target, as QEMU does not
define any default machine. Thus we should not having been accepting
argv without a -machine provided.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virQEMUCapsGetDefaultMachine() method doesn't get QEMU's default
machine any more, instead it gets the historical default that libvirt
prefers for each arch. Rename it, so that the old name can be used for
getting QEMU's default.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't honour the QEMU default machine type anymore, always using the
libvirt chosen default instead. The QEMU argv parser, however, will need
to know the exacty QEMU default, so we must record that info.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
'metadata' and 'leases' are features internal to libvirt and thus don't
influence the generated QEMU command line. As they are not tested we
don't need the output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now we assume the flag always so there's no use for this test. Probably
a leftover from the cleanup of the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The test files were unused, but we don't have any other test for this
feature. Make use of the existing files by removing disks and using
DO_TEST_CAPS_LATEST to execute them. The legacy output files will be
dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
aarch64-acpi-nouefi and hostdev-scsi-boot are unused. Noticed when
checking whether '-nodefconfig' is still used by libvirt.
Unused since their introduction in commit deb38c4 and bab6ee6
respectively.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was usable since qemu 1.3 so we can remove all the
detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All supported qemus support FD passing so modify the tests to test the
proper code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For versions where we can probe that the arguments are optional we can
perform the probing by a schema query rather than sending a separate
command to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For now, there are 9 test cases
- testVshTableNew: Creating table with empty header
- testVshTableHeader: Printing table with/without header
- testVshTableRowAppend: Appending row with various number of cells.
Only row with same number of cells as in header is accepted.
- testUnicode: Printing table with unicode characters.
Checking correct alignment.
- testUnicodeArabic: test opposite (right to left) writing
- testUnicodeZeroWidthChar
- testUnicodeCombiningChar
- testUnicodeNonPrintableChar,
- testNTables: Create and print varios types of tables - one column,
one row table, table without content, standart table...
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Instead of printing it straight in virsh, it creates table struct
which is filled with header and rows(domains). It allows us to know
more about table before printing to calculate alignment right.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
With blockdev we can use the full range of commands to manipulate the
tray and the medium separately. Implement monitor code for this.
Schema testing done in the qemumonitorjsontest allows us to verify that
we generate the commands correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The copy-on-read feature is expressed by adding a new node layer in
qemu when using -blockdev. Since we will keep these per-disk (as opposed
to per storage source) we need to store the appropriate node names in
the disk definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using -blockdev you need to use the qom path to refer to the disk
fronends. Add means for storing the path and getting it after restart.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to backing store indexes which will become stable eventually
we need also to be able to format and store in the status XML for later
use the index for the top level of the backing chain.
Add XML formatter, parser, schema and docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Node names for block objects in qemu need to be unique for an instance
of the qemu process. Add a counter to generate objects sequentially and
store it in the status XML so that we can restore it.
The helpers added allow to create new node names and reset the counter
after the VM process terminates.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a user configures the backing chain in the XML we should not ignore
it. We already do parse it but don't format it out. As a
safety-precaution don't attempt to format detected chain into the
inactive XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test data for nested backing chains with/without indexes (used in
status XMLs) which will excercise blockdev and the related work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The blockdev support will change existing approach to add disks to VMs
so all tests using the DO_TEST_CAPS_LATEST approach which have any disks
need to be forked so that the changes can be applied.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' field reported by 'query-block' is empty when -blockdev is
used. Add an argument which will allow matching disk by using the qdev
id so we can use this code with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' argument matches only the legacy drive alias. For blockdev
we need to set the throttling for a QOM id and thus we'll need to use
the 'id' field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuDomainAttachDeviceDiskLive to change the media in
qemuDomainChangeDiskLive as the former function already does all the
necessary steps to prepare the new medium.
This also allows us to turn qemuDomainChangeEjectableMedia static.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't use it for anything useful so it does not make much sense to
extract it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Print the differences in case when the expected data does not match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we're not saving the platform-specific data into a cache, we're
not going to populate the structure, which in turn will cause a crash
upon calling virNodeGetSEVInfo because of a NULL pointer dereference.
Ultimately, we should start caching this data along with host-specific
capabilities like NUMA and SELinux stuff into a separate cache, but for
the time being, this is a semi-proper fix for a potential crash.
Backtrace (requires libvirtd restart to load qemu caps from cache):
#0 qemuGetSEVInfoToParams
#1 qemuNodeGetSEVInfo
#2 virNodeGetSEVInfo
#3 remoteDispatchNodeGetSevInfo
#4 remoteDispatchNodeGetSevInfoHelper
#5 virNetServerProgramDispatchCall
#6 virNetServerProgramDispatch
#7 virNetServerProcessMsg
#8 virNetServerHandleJob
#9 virThreadPoolWorker
#10 virThreadHelper
https: //bugzilla.redhat.com/show_bug.cgi?id=1612009
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
So the procedure to detect SEV support works like this:
1) we detect that sev-guest is among the QOM types and set the cap flag
2) we probe the monitor for SEV support
- this is tricky, because QEMU with compiled SEV support will always
report -object sev-guest and query-sev-capabilities command, that
however doesn't mean SEV is supported
3) depending on what the monitor returned, we either keep or clear the
capability flag for SEV
Commit a349c6c21c added an explicit check for "GenericError" in the
monitor reply to prevent libvirtd to spam logs about missing
'query-sev-capabilities' command. At the same time though, it returned
success in this case which means that we didn't clear the capability
flag afterwards and happily formatted SEV into qemuCaps. Therefore,
adjust all the relevant callers to handle -1 on errors, 0 on SEV being
unsupported and 1 on SEV being supported.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
In order to test SEV we need real QEMU capabilities. Ideally, this would
be tested with -latest capabilities, however, our capabilities are
currently tied to Intel HW, even the 2.12.0 containing SEV were edited by
hand, so we can only use that one for now, as splitting the capabilities
according to the vendor is a refactor for another day. The need for real
capabilities comes from the extended SEV platform data (PDH, cbitpos,
etc.) we'll need to cache/parse.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
As advertised in the previous commit, we need the list of
accessed files to also contain action that caused the $path to
appear on the list. Not only this enables us to fine tune our
white list rules it also helps us to see why $path is reported.
For instance:
/run/user/1000/libvirt/libvirt-sock: connect: qemuxml2argvtest: QEMU XML-2-ARGV net-vhostuser-multiq
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The check-file-access.pl script is used to match access list
generated by virtestmock against whitelisted rules stored in
file_access_whitelist.txt. So far the rules are in form:
$path: $progname: $testname
This is not sufficient because the rule does not take into
account 'action' that caused $path to appear in the list of
accessed files. After this commit the rule can be in new form:
$path: $action: $progname: $testname
where $action is one from ("open", "fopen", "access", "stat",
"lstat", "connect"). This way the white list can be fine tuned to
allow say access() but not connect().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
So far we are setting only fake secret and storage drivers.
Therefore if the code wants to call a public NWFilter API (like
qemuBuildInterfaceCommandLine() and qemuBuildNetCommandLine() are
doing) the virGetConnectNWFilter() function will try to actually
spawn session daemon because there's no connection object set to
handle NWFilter driver.
Even though I haven't experienced the same problem with the rest
of the drivers (interface, network and node dev), the reasoning
above can be applied to them as well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This proves libvirt can now handle high socket_id and
core_id values correctly and ensures we won't introduce
regressions in this area.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The latter are no longer used by libvirt, and the former
never were; moreover, both have a corresponding *_list
file which we can manipulate very conveniently using our
bitmap APIs, so dropping them makes sure in the future
developers will look into that rather than trying to
parse the kernel binary bitmaps.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
