Add <controller type='scsi' model handling for virtio transitional
devices. Ex:
<controller type='scsi' model='virtio-transitional'/>
* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"
The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<filesystem> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-9p-pci-{non-}traditional in qemu, let's add a standard
model= attribute. The accepted values are:
- virtio
- virtio-transitional
- virtio-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
qemu vhost-scsi devices map to XML roughly like:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn=X/>
</hostdev>
To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.
Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add new <disk> model values for virtio transitional devices. When
combined with bus='virtio':
* "virtio-transitional" maps to qemu "virtio-blk-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-blk-pci-non-transitional"
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.
Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a single QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL that
will be set if any of the following qemu devices are found:
virtio-blk-pci-transitional
virtio-blk-pci-non-transitional
virtio-net-pci-transitional
virtio-net-pci-non-transitional
vhost-scsi-pci-transitional
vhost-scsi-pci-non-transitional
virtio-rng-pci-transitional
virtio-rng-pci-non-transitional
virtio-9p-pci-transitional
virtio-9p-pci-non-transitional
virtio-balloon-pci-transitional
virtio-balloon-pci-non-transitional
vhost-vsock-pci-transitional
vhost-vsock-pci-non-transitional
virtio-input-host-pci-transitional
virtio-input-host-pci-non-transitional
virtio-scsi-pci-transitional
virtio-scsi-pci-non-transitional
virtio-serial-pci-transitional
virtio-serial-pci-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The previous patch made it possible to split multiple commands by
adding newline, but not to split a long single command. The sequence
backslash-newline was being used as if it were a quoted newline
character, rather than completely elided the way the shell does.
Again, add more tests, although this time it seems more like I am
suffering from a leaning-toothpick syndrome with all the \.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
I wanted to do a demonstration with virsh batch mode, which
takes multiple commands all packed into a single argument:
$ virsh -c test:///default 'echo a; echo b;'
a
b
but that produced a really long line, so I tried to make it
more legible:
$ virsh -c test:///default '
echo a;
echo b;
'
error: unknown command: '
'
Let's be more like the shell, and treat unquoted newline as a
command separator just as we do for semicolon. In fact, with
that, I can even now mix styles:
$ virsh -c test:///default '
echo a; echo b
echo c
'
a
b
c
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Added GPFS as shared file system recognized during live migration
security checks.
GPFS is 'IBM General Parallel File System' also called
'IBM Spectrum Scale'
BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1679528
Signed-off-by: Diego Michelotto <diego.michelotto@cnaf.infn.it>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Implement the MSRs ignore unknown reads and writes feature
that's specified using:
<features>
...
<msrs unknown='ignore'>
...
</features>
in the domain XML.
In bhyve, it's just passing '-w' command line argument to the bhyve(8)
executable.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The tests/cputestdata/cpu-parse.sh script has been broken since the
cpu_map.xml file was split into several XMLs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virBuffer is almost always stack-allocated, but requires freeing of the
internals on error. Introduce a VIR_AUTOCLEAN function to deal with
this.
Along with the addition add a test which would leak the buffer contents
if it weren't autocleaned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The messages reference testBufEscapeN instead of testBufEscapeRegex.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
dnsmasq documentation says that the *IPv4* prefix/network
address/broadcast address sent to dhcp clients will be automatically
determined by dnsmasq by looking at the interface it's listening on,
so the original libvirt code did not add a netmask to the dnsmasq
commandline (or later, the dnsmasq conf file).
For *IPv6* however, dnsmasq apparently cannot automatically determine
the prefix (functionally the same as a netmask), and it must be
explicitly provided in the conf file (as a part of the dhcp-range
option). So many years after IPv4 DHCP support had been added, when
IPv6 dhcp support was added the prefix was included at the end of the
dhcp-range setting, but only for IPv6.
A user had reported a bug on a host where one of the interfaces was a
superset of the libvirt network where dhcp is needed (e.g., the host's
ethernet is 10.0.0.20/8, and the libvirt network is 10.10.0.1/24). For
some reason dnsmasq was supplying the netmask for the /8 network to
clients requesting an address on the /24 interface.
This seems like a bug in dnsmasq, but even if/when it gets fixed
there, it looks like there is no harm in just always adding the
netmask to all IPv4 dhcp-range options similar to how prefix is added
to all IPv6 dhcp-range options.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently, some arguments are called strcontent and strsrc, or
content and src or some other combination. This makes it
impossible to see at the first glance what argument is supposed
to represent 'expected' value and which one represents 'actual'
value. Rename the arguments to make it obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current naming makes it hard for me to see which holds the
expected value and which holds the actual value. Rename them to
make it obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to save a few lines of code, and also since it's hype
let's use VIR_AUTOFREE() for the two strings we allocate there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuProcessQMPStart starts a QEMU process and monitor connection that
can be used by multiple functions possibly for multiple QMP commands.
The QMP exchange to exit capabilities negotiation mode and enter command
mode can only be performed once after the monitor connection is
established.
Move responsibility for entering QMP command mode into the
qemuProcessQMP code so multiple functions can issue QMP commands in
arbitrary orders.
This also simplifies the functions using the connection provided by
qemuProcessQMPStart to issue QMP commands.
Test code now needs to call qemuMonitorSetCapabilities to send the
message to switch to command mode because the test code does not use the
qemuProcessQMP command that internally calls qemuMonitorSetCapabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that virStorageSource is a subclass of virObject we can use
virObjectUnref and remove virStorageSourceFree which was a thin wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since virStorageSource is now a subclass of virObject, we can use
VIR_AUTOUNREF instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add virStorageSourceNew and refactor places allocating that structure to
use the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
On some very basic installations (e.g. some container images) the
modprobe binary might be missing. If that is the case, don't fail
virkmodtest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Previous two commits demonstrate a hole in our test scenario.
Fix that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduced by d86c876a66.
There is no real need to have "user-" prefix for chardev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only one path will consume the @def; otherwise, we need to free it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit a7424faff QMP is always used.
Also, commit 932534e8 removed the last use of this apart from:
* parsing/formatting this in the caps cache
* using it as a temporary variable to know when to report an error
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Trivially implement this by deleting the bogus check in
vshTableSafeEncode.
Now it returns an empty string for an empty string instead
of returning NULL without setting an error.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Mock out libxlCapsHasPVUSB to always return true, so test results
aren't dependent on host libxl version
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows us to mock functions in the libxl driver, like
is already possible for the qemu driver
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Every other mock library is named ending in mock.c, move
virmocklibxl.c to follow that pattern
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
DO_TEST_ATTACH and DO_TEST_ATTACH_EVENT now do the same thing so we can
remove the latter including the infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Currently all supported qemu versions now have support for the
DEVICE_DELETED event. This means that testing the old approach is a
waste of time.
Always add the QEMU_CAPS_DEVICE_DEL_EVENT capability in the hotplug test
and fix existing test cases.
The 'disk-virtio', 'disk-usb', 'disk-scsi', and 'disk-scsi-2' already
had variants that used the event, so the non-event variants will be
removed.
For all other cases the QMP_DEVICE_DELETED macro is used to add the
correct reply.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This variant is unused as we create the object including capabilities
with DO_TEST_ATTACH_EVENT, which is then reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU accidentally exposed the id of -drive (or same value as disk
serial, if provided) in one of the identifiers visible from the guest.
To avoid regression in case when -blockdev will be used we need to
always specify it ourselves.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The property allows to control the guest-visible content of the vendor
specific designator of the 'Device Identification' page of a SCSI
device's VPD (vital product data).
QEMU was leaking the id string of -drive as the value if the 'serial' of
the disk was not specified. Switching to -blockdev would impose an ABI
change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Based on qemu commit 'v3.1.0-1445-ga61faa3d02'. Will allow checking
for the scsi 'device_id' property.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Upcoming addition of a new field will need to make sure that SCSI disk
serial is tested as well. Add a case to one of the existing tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For SCSI, IDE, and AHCI cdroms the appropriate device types which select
the correct media are used. In qemu there's one other code path that
looks at -drive media=cdrom in the XEN pv code. Thankfully we don't
support it with qemu (see qemuBuildDiskDeviceStr). All other devices
ignore it as the comment states, thus we can drop that code.
The test fallout is expectedly only in the test added for uncommon cdrom
types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add full and empty cdroms on 'usb' and 'sd' bus to have test
coverage. Note that this does not guarantee that qemu will accept them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Attempting to create an empty virtio-blk drive results into:
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0xc,drive=drive-virtio-disk1,id=virtio-disk1: Device needs media, but drive is empty
Attempting to eject media from virtio-blk based drive results into:
error: internal error: unable to execute QEMU command 'eject': Device 'drive-virtio-disk0' is not removable
Forbid configurations where users would attempt to use cdroms in virtio
bus.
Fix few wrong examples which are not really relevant to the tested code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.
Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of scsi-disk into the two separate devices was introduced by
qemu commit b443ae67 released in qemu v0.15.
All changes to test files are not really related to disk testing thanks
to previous refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The tests are for the same feature. Move all the cases to 'disk-shared'
case as it's already using DO_TEST_CAPS_LATEST
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
A lot of code with no real impact and popularity. Remove all the helpers
now that the only test case is gone.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Testing that the cachemode is properly recorded to the configuration
after startup does not add much value and overcomplicates the xml2argv
test.
Remove the 'disk-shared' test with old capabilities as the test with
real capabilities covers the code sufficiently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Using an old strict set of capabilities is not of much use if a code
path would select a more modern controller by accident.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that we have a specific test for testing the 'virtio-scsi'
controller and other tests which test a combination of scsi and non-scsi
devices this test no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit a4cda054e7 we are using 'ide-hd' and 'ide-cd' instead of
'ide-drive'. We also should probe capabilities for 'ide-hd' instead of
'ide-drive'. It is safe to do as 'ide-drive' is the common denominator
of both 'ide-hd' and 'ide-cd' so all the properties were common.
For now the test data are modified by just changing the appropriate type
when probing for caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit 02e8d0cfdf we are using 'scsi-hd' and 'scsi-cd' instead of
'scsi-disk'. We also should probe capabilities for 'scsi-hd' instead of
'scsi-disk'. It is safe to do as 'scsi-disk' is the common denominator
of both 'scsi-hd' and 'scsi-cd' so all the properties were common.
For now the test data are modified by just changing the appropriate type
when probing for caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To avoid changes to the filled in microcode in case we change the caps
replies file for any reason make the number depend on the filename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Turns out different versions of QEMU on the same architecture
produce the same output, so we can have a single output file
per architecture instead of duplicating the same data over and
over again.
Spotted-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Storage pools might want to specify format of the image when translating
the volume thus we can't add any default format when parsing the XML.
Add a explicit format when starting the VM and format is not present
neither by user specifying it nor by the storage pool translation
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Post parse callback adds the 'raw' type only for local files. Remote
files can also have backing store (even local) so we should do this also
for network backed storage.
Note that virStorageFileGetMetadata always considers files with no type
as raw so we will not accidentally traverse the backing chain and allow
unexpected files being labelled with svirt labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify some existing tests of network-based disks to omit the storage
format specification.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit f80eae8c2a I was too agresive in removing properties of
-drive for empty drives. It turns out that qemu actually persists the
state of 'readonly' and the throttling information even for the empty
drive.
Removing 'readonly' thus made qemu open any subsequent images added via
the 'change' command as RW which was forbidden by selinux thanks to the
restrictive sVirt label for readonly media.
Fix this by formating the property again and bump the tests and leave a
note detailing why the rest of the properties needs to be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.
Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Since we're setting the zone anyway, it will be useful to allow
setting a different (custom) zone for each network. This will be done
by adding a "zone" attribute to the "bridge" element, e.g.:
...
<bridge name='virbr0' zone='myzone'/>
...
If a zone is specified in the config and it can't be honored, this
will be an error.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation for adding several other firewalld-specific functions,
separate the code that's unique to firewalld from the more-generic
"firewall" file.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit fb0d0d6c54 added capabilities data and updated
qemucapabilitiestest but forgot to update qemucaps2xmltest
at the same time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This shows users can now use PCI for RISC-V guests, as long
as they opt into it by manually assigning addresses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This adds an additional directive to the dnsmasq configuration file that
notifies clients via dhcp about the link's MTU. Guests can then choose
adjust their link accordingly.
Signed-off-by: Casey Callendrello <cdc@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This test relies on namespace support, which is only compiled in
if we have the 'fs' and 'netfs' backends.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Instead of repeating the same platform for every test,
set it once, since we do the same tests with the same
input for all platforms, it's just the output that differs.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Only run the pool-netfs-ns-mountopts if built WITH_STORAGE_FS and only
run pool-rbd-ns-configopts if built with WITH_STORAGE_RBD since the
namespace support is only enabled if the pool is enabled.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The custom namespaces were originally registered against the storage
pool source struct, but during review this was changed to the top level
storage pool struct. The namespace URIs were not updated to match, so
had a redundant '/source' component.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit f2f84b4d4 added storagepoolxml2argvtest processing; however,
it didn't follow alter the else to !WITH_STORAGE and add the source
itself to the EXTRA_DIST like the other WITH_STORAGE options for
virstorageutiltest and storagevolxml2argvtest.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 7a227688a caused a build failure on mingw. Following
other uses of including ../src/libvirt_driver_storage_impl.la
I moved to under the WITH_STORAGE conditional.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Allow for adjustment of RBD configuration options via Storage
Pool XML Namespace adjustments. When namespace arguments are
used to start the pool, add a VIR_WARN to indicate that the
startup was tainted by custom config_opts.
Based off original patch/concept:
https://www.redhat.com/archives/libvir-list/2014-May/msg00940.html
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If the Storage Pool Namespace XML data exists, format the mount
options on the MOUNT command line and issue a VIR_WARN to indicate
that the storage pool was tainted by custom mount_opts.
When the pool is started, the options will be generated on the
command line along with the options already defined.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the virStoragePoolFSMountOptionsDef to be used to
manage the Storage Pool XML Namespace for mount options.
Using a new virStorageBackendNamespaceInit function, set the
virStoragePoolXMLNamespace into the _virStoragePoolOptions when
the storage backend is loaded.
Modify the storagepool.rng to allow for the usage of a different
XML namespace to parse the fs_mount_opts to be included with
the fs and netfs storage pool definitions.
Modify the storagepoolxml2xmltest to utilize a properly modified
XML file to parse and format the namespace for a netfs storage pool.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If protocolVer present, add the -o nfsvers=# to the command
line for the NFS Storage Pool
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an optional way to define which NFS Server version will be
used to content the target NFS server.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1584663
Modify the command generation to add some default options to the
fs/netfs storage pools based on the OS type. For Linux, it'll be
the "nodev, nosuid, noexec". For FreeBSD, it'll be "nosuid, noexec".
For others, just leave the options alone.
Modify the storagepoolxml2argvtest to handle the fact that the
same input XML could generate different output XML based on whether
Linux, FreeBSD, or other was being built.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some of the query callbacks want to know the firewall layer that was
being used for triggering the query to avoid duplicating that data.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1665553
Ceph can be mounted just like any other filesystem and in fact is
a shared and cluster filesystem. The filesystem magic constant
was taken from kernel sources as it is not in magic.h yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:
@ rule1 @
identifier a, b;
@@
- b = a;
...
- a = NULL;
+ VIR_STEAL_PTR(b, a);
Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Implement support for passing custom command line arguments
to bhyve using the 'bhyve:commandline' element:
<bhyve:commandline>
<bhyve:arg value='-newarg'/>
</bhyve:commandline>
* Define virDomainXMLNamespace for the bhyve driver, which
at this point supports only the 'commandline' element
described above,
* Update command generation code to inject these command line
arguments between driver-generated arguments and the vmname
positional argument.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move the rng->model == VIRTIO check to parse time. This also
allows us to remove similar checks throughout the qemu driver
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This will be extended in the future, so let's simplify things by
centralizing the checks.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This adds the virt-aa-helper support for gl enabled graphics devices to
generate rules for the needed rendernode paths.
Example in domain xml:
<graphics type='spice'>
<gl enable='yes' rendernode='/dev/dri/bar'/>
</graphics>
results in:
"/dev/dri/bar" rw,
Special cases are:
- multiple devices with rendernodes -> all are added
- non explicit rendernodes -> follow recently added virHostGetDRMRenderNode
- rendernode without opengl (in egl-headless for example) -> still add
the node
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1757085
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Use the password stored in the secret driver under
the uuid specified by the vnc_tls_x509_secret_uuid
option in qemu.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=1602418
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The next release of QEMU is going to be 4.0.0. A bit early, but
this adds capabilities data for x86_64 from current qemu git
15bede554162dda822cd762c689edb6fa32b6e3b
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
If a -drive has no image, using image properties makes qemu whine that
they should not be used.
This patch stops formating cache/readonly/... for empty drives
for the pre-blockdev syntax. Unfortunately those parameters can't be
added later when inserting media, but on the other hand qemu will start
with an empty drive.
Since we already were able to start a VM with such config previously due
to qemu ignoring them I've opted just to skip formatting them.
Additionally with -blockdev support it will work as expected as the
image properties will be formatted when adding the image itself which is
not possible without it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1651457
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Upcomming change will influence CDROM with cache mode so add a test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The feature was added to QEMU in 3.1.0 and it is currently blocking
migration, which is expected to change in the future. Luckily 3.1.0 is
new enough to give us migratability hints on each feature via
query-cpu-model-expension, which means we don't need to use the
"migratable" attribute on the CPU map XML.
The kernel calls this feature arch_capabilities and RHEL/CentOS 7.* use
arch-facilities. Apparently some CPU test files were gathered with the
RHEL version of QEMU. Let's update the test files to avoid possible
confusion about the correct naming.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our use of INCLUDES in Makefile.am hearkens back to when we had to
cater to automake 1.9.6 (thanks, RHEL 5) which lacked AM_CPPFLAGS.
Modern Automake flags a warning that INCLUDES is deprecated, and
now that we mandate RHEL 7 or better (see commit c1bc9c66), we no
longer have to cater to the old spelling. This change will also
make it easier to do per-binary CPPFLAGS.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit c0a8ea45 removed the use of gettextize, and the setting of
GETTEXT_CPPFLAGS, but did not scrub the now-unused variable from
Makefile.am snippets.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
According to the result parsing from xml, add the unarmed property
into QEMU command line:
-device nvdimm,...[,unarmed=on]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to the result parsing from xml, add pmem property
into QEMU command line:
-object memory-backend-file,...[,pmem=on]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to the result parsing from xml, add align property
into QEMU command line:
-object memory-backend-file,...[,align=xxx]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Deprecate DO_TEST to do nvdimm qemuxml2argvdata tests, because
DO_TEST_CAPS_LATEST is a better choice. The DO_TEST needs
to specify all qemu capabilities and is not easy for scaling.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability tracks if nvdimm has the unarmed attribute or not
for the nvdimm readonly xml attribute.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability tracks if memory-backend-file has the pmem
attribute or not.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability tracks if memory-backend-file has the align
attribute or not.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:
<devices>
...
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/dax0.0</path>
<alignsize unit='MiB'>2</alignsize>
</source>
<target>
<size unit='MiB'>4094</size>
<node>0</node>
<label>
<size unit='MiB'>2</size>
</label>
</target>
</memory>
...
</devices>
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This test checks if security label remembering works correctly.
It uses qemuSecurity* APIs to do that. And some mocking (even
though it's not real mocking as we are used to from other tests
like virpcitest). So far, only DAC driver is tested.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add guards to avoid calling strchr when @err_noinfo == NULL or
calling virErrorTestMsgFormatInfoOne when @err_info == NULL as
both would fail with a NULL deref.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
If an editor has an XML file open, it may create a temporary . file. The
existance of this file will cause the virschematest to fail, so just
skip these editor temp files.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU command line arguments are very long and currently all written
on a single line to /var/log/libvirt/qemu/$GUEST.log. This introduces
logic to add line breaks after every env variable and "-" optional
argument, and every positional argument. This will create a clearer log
file, which will in turn present better in bug reports when people cut +
paste from the log into a bug comment.
An example log file entry now looks like this:
2018-12-14 12:57:03.677+0000: starting up libvirt version: 5.0.0, qemu version: 3.0.0qemu-3.0.0-1.fc29, kernel: 4.19.5-300.fc29.x86_64, hostname: localhost.localdomain
LC_ALL=C \
PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin \
HOME=/home/berrange \
USER=berrange \
LOGNAME=berrange \
QEMU_AUDIO_DRV=none \
/usr/bin/qemu-system-ppc64 \
-name guest=guest,debug-threads=on \
-S \
-object secret,id=masterKey0,format=raw,file=/home/berrange/.config/libvirt/qemu/lib/domain-33-guest/master-key.aes \
-machine pseries-2.10,accel=tcg,usb=off,dump-guest-core=off \
-m 1024 \
-realtime mlock=off \
-smp 1,sockets=1,cores=1,threads=1 \
-uuid c8a74977-ab18-41d0-ae3b-4041c7fffbcd \
-display none \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=23,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-no-shutdown \
-boot strict=on \
-device qemu-xhci,id=usb,bus=pci.0,addr=0x1 \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on
2018-12-14 12:57:03.730+0000: shutting down, reason=failed
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virCommand APIs do not expect to be given a NULL value for an arg
name or value. Such a mistake can lead to execution of the wrong
command, as the NULL may prematurely terminate the list of args.
Detect this and report suitable error messages.
This identified a flaw in the storage test which was passing a NULL
instead of the volume path. This flaw was then validated by an incorrect
set of qemu-img args as expected data.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Make sure that we don't add any broken error message strings any more.
This ensures that both the version with and without additional info is
populated, the version without info does not have any formatting
modifiers and the version with info has exactly one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a syntax-check script that validates header files use a
common layout:
/*
...copyright header...
*/
<one blank line>
#ifndef SYMBOL
# define SYMBOL
....content....
#endif /* SYMBOL */
For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:
#ifndef SYMBOL_ALLOW
# error ....
#endif /* SYMBOL_ALLOW */
<one blank line>
The many mistakes this script identifies are then fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Turns out there some build platforms that must not define MOUNT
or VGCHANGE in config.h... So moving the commands from the storage
backend specific module into a common storage_util module causes
issues for those platforms.
So instead of assuming they are there, let's just pass the command
string to the storage util API's from the storage backend specific
code (as would have been successful before). Also modify the test
to determine whether the MOUNT and/or VGCHANGE doesn't exist and
just define it to (for example) what Fedora has for the path. Could
have just used "mount" and "vgchange" in the call, but that defeats
the purpose of adding the call to virTestClearCommandPath.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1656255
If virSecretGetSecretString is using by secretLookupByUUID,
then it's possible the found sec->usageType doesn't match the
desired @secretUsageType. If this occurs for the encrypted
volume creation processing and a subsequent pool refresh is
executed, then the secret used to create the volume will not
be found by the storageBackendLoadDefaultSecrets which expects
to find secrets by VIR_SECRET_USAGE_TYPE_VOLUME.
Add a check to virSecretGetSecretString to avoid the possibility
along with an error indicating the incorrect matched types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add the logical storage pool startup validation (xml2argv) tests.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Cover the case where @netauto would be used to create the command
line in virStorageBackendFileSystemMountCmd. Essentially when the
pool type is "netfs", but the "source.format" is empty, create the
command line properly.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Similar to qemuxml2argv and storagevolxml2argv, let's create some
tests to ensure that the XML generates a consistent command line.
Using the same list of pools as storagepoolxml2xmltest, start with
the file system tests (fs, netfs, netfs-cifs, netfs-gluster).
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1624223
There are two ways to request memory preallocation on cmd line:
-mem-prealloc and .prealloc attribute for a memory-backend-file.
However, as it turns out it's not safe to use both at the same
time. If -mem-prealloc is used then qemu will fully allocate the
memory (this is done by actually touching every page that has
been allocated). Then, if .prealloc=yes is specified,
mbind(flags = MPOL_MF_STRICT | MPOL_MF_MOVE) is called which:
a) has to (possibly) move the memory to a different NUMA node,
b) can have no effect when hugepages are in play (thus ignoring user
request to place memory on desired NUMA nodes).
Prefer -mem-prealloc as it is more backward compatible
compared to switching to "-numa node,memdev= + -object
memory-backend-file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The QEMU validation code for graphics has been in place for a while, but
because it is only executed from virDomainDeviceInfoIterateInternal, it
was never run, since the iterator expects the device to have boot info
which graphics don't have. The unfortunate side effect of this whole mess
was that a few capabilities were missing from the test suite (as commit
d8266ebe1 demonstrated with graphics-spice-invalid-egl-headless test),
which in turn meant that a few graphics tests which expected a failure
happily accepted any failure the test runtime returned which made them
succeed. The impact of this was that we then allowed to start a domain
with multiple OpenGL-enabled graphics devices.
This patch enables iteration over graphics devices. Unsurprisingly,
a few tests started to fail as a result, so fix those too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It's fairly easy to forget to add a capability to the list of
capabilities for a negative test case which might yield (for us) very
unfortunate results. Therefore, introduce negative versions of
DO_TEST_CAPS_LATEST macros, so that real QEMU caps can be used with
tests that expect a failure too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This commit includes a test case for multiple network definitions. It is
useful right now, but it will be more useful when the index used by LXC
version 3.X is implemented to support this new settings. The version 3.X
is using indexes to specify each network settings.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The networkxml2firewalltest sets virCommand to dry run mode but doesn't
provide a callback to fill in stdout/stderr. As a result when the
firewall code queries rules it gets a NULL output and so never triggers
the callback to process output.
This trivial change just returns an empty string for the command output
in order to ensure the callback gets triggered. It has no effect right
now, but in future patches this will trigger greater test coverage.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for converting openvswitch interface configuration
to/from libvirt domXML and xl.cfg(5). The xl config syntax for
virtual interfaces is described in detail in the
xl-network-configuration(5) man page. The Xen Networking wiki
also contains information and examples for using openvswitch
in xl.cfg config format
https://wiki.xenproject.org/wiki/Xen_Networking#Open_vSwitch
Tests are added to check conversions of openvswitch tagged and
trunked VLAN configuration.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the disk from tests focusing on other aspects so that change to
-blockdev will touch less tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add markers for allowing test debugging if one of the steps fails
without setting a proper error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Depending on whether QEMU actually supports the option, we can put the
'rendernode' on the '-display egl-headless' cmdline.
https://bugzilla.redhat.com/show_bug.cgi?id=1628892
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have QAPI introspection of display types in QEMU upstream,
we can check whether the 'rendernode' option is supported with
egl-headless display type.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Up until now, we formatted 'rendernode=' onto QEMU cmdline only if the
user specified it in the XML, otherwise we let QEMU do it for us. This
causes permission issues because by default the /dev/dri/renderDX
permissions are as follows:
crw-rw----. 1 root video
There's literally no reason why it shouldn't be libvirt picking the DRM
render node instead of QEMU, that way (and because we're using
namespaces by default), we can safely relabel the device within the
namespace.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for armv6l qemu guests has been added.
Tested with arm1176 CPU on x86.
Signed-off-by: Stefan Schallenberg <infos@nafets.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commits d7434ae800 and 9c4afbda34 added replies files for
QEMU 3.0.0 on s390x and QEMU 3.1.0 on x86_64 respectively, but
only enabled the corresponding test in qemucapabilities and not
in qemucaps2xml.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Handle PVH domain type in both directions (xen-xl->xml, xml->xen-xl).
And add a test for it.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
builder="hvm" is deprecated since Xen 4.10, new syntax is type="hvm" (or
type="pv", which is default). Since the old one is still supported,
still use it when writing native config, so the config will work on
older Xen too (and will also not complicate tests).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Add a capability check for IOThread polling (all were added at the
same time, so only one check is necessary).
Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
with the only changes to include the more recent QEMU releases.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new memoryBacking source type "memfd", supported by QEMU (when
the capability is available).
A memfd is a specialized anonymous memory kind. As such, an anonymous
source type could be automatically using a memfd. However, there are
some complications when migrating from different memory backends in
qemu (mainly due to the internal object naming at this point, but
there could be more). For now, it is simpler and safer to simply
introduce a new source type "memfd". Eventually, the "anonymous" type
could learn to use memfd transparently in a separate change.
The main benefits are that it doesn't need to create filesystem files,
and it also enforces sealing, providing a bit more safety.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 3.1 should only expose the property if the host is actually
capable of creating hugetable-backed memfd. However, it may fail
at runtime depending on requested "hugetlbsize".
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add new functions to generate zPCI command string and append it to
QEMU command line. And the related tests are added.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We should ensure that QEMU supports zPCI when a zPCI address is defined
in XML and otherwise report an error. This patch introduces a generic
validation function qemuDomainDeviceDefValidateAddress() which calls
qemuDomainDeviceDefValidateZPCIAddress() if address type is PCI address.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let's introduce zPCI capability.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
QEMU 3.1 supports Hyper-V-style PV IPIs making it cheaper for Windows
guests to send an IPI, especially when it targets many CPUs.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
This commit includes new test cases to cover LXC version 3.0 and higher.
This LXC version rebased some settings entries and deprecated other ones.
As we support both, we should include tests to minimize problems with
integration between them.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a test to fetch the GetMemoryStat output. This only gets
data for v1 only right now since the v2 data from commit 61ff6021
is rather useless returning all 0's. The v1 data was originally
added in commit d1452470.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introducing <monitor> element under <cachetune> to represent
a cache monitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit id 5eb61e6846 neglected to change the name in the wrong value
output to virCgroupGetPercpuStats from virCgroupGetMemoryUsage.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1640465
Weirdly enough, there can be symlinks in the path we are trying
to fix. If it is the case our clever algorithm that finds matches
against mount table won't work. Canonicalize path at the
beginning then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632833
When doing a SCSI passthrough we don't put format= onto the
command line. This causes qemu to probe the format automatically
which ends up in a warning in the domain log and possible qemu
disabling writes to the first block (according to the warning
message).
Based-on-work-of: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit ed5aa85f37
qemu: don't use chardev FD passing for vhostuser backend
altered the legacy DO_TEST macro.
Run the test against capabilities of QEMU 2.5.0 (which did not
support QEMU_CAPS_CHARDEV_FD_PASS) as well as the latest version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Test CCID smartcard passthrough from a unix listen socket.
Use the capabilities of QEMU 2.5.0 which did not support
chardev FD passing and the latest one, which (at the time
of this commit) it does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The URI parser used by libvirt does not populate uri->path if the
trailing slash is missing. The code virStorageSourceParseBackingURI
would then not populate src->path.
As only NBD network disks are allowed to have the 'name' field in the
XML defining the disk source omitted we'd generate an invalid XML which
we'd not parse again.
Fix it by populating src->path with an empty string if the uri is
lacking slash.
As pointed out above NBD is special in this case since we actually allow
it being NULL. The URI path is used as export name. Since an empty
export does not make sense the new approach clears the src->path if the
trailing slash is present but nothing else.
Add test cases now to cover all the various cases for NBD and non-NBD
uris as there was to time only 1 test abusing the quirk witout slash for
NBD and all other URIs contained the slash or in case of NBD also the
export name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Commit 4f4c3b13 (v3.3) fixed an issue where performing cleanup of
libvirt objects could sometimes lose error messages, by adding code
to copy the libvirt error into last_error prior to cleanup paths.
However, it caused a regression: on other paths, some errors are now
printed twice, if libvirt still remembers in its thread-local
storage that an error was set even after virsh cleared last_error.
For example:
$ virsh -c test:///default snapshot-delete test blah
error: Domain snapshot not found: no domain snapshot with matching name 'blah'
error: Domain snapshot not found: no domain snapshot with matching name 'blah'
Fix things by telling libvirt to discard any thread-local errors at
the same time virsh prints an error message (whether or not the libvirt
error is the same as what is stored in last_error).
Update the virsh-undefine testsuite (partially reverting portions of
commit b620bdee, by removing -q, to more easily pinpoint which commands
are causing which messages), now that there is only one error message
instead of two.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The mock is built on Linux only. Therefore we should load it only
on Linux too. This fixes the FreeBSD build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are couple of things wrong with the current implementation.
The first one is that in the first loop the code tries to build a
list of fuse.glusterfs mount points. Well, since the strings are
allocated in a temporary buffer and are not duplicated this
results in wrong decision made later in the code.
The second problem is that the code does not take into account
subtree mounts. For instance, if there's a fuse.gluster mounted
at /some/path and another FS mounted at /some/path/subdir the
code would not recognize this subdir mount.
Reported-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If the given path is already a mount point (e.g. a bind mount of
a file, or simply a direct mount point of a FS), then our code
fails to detect that because the first thing it does is cutting
off part after last slash '/'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce some basic test cases for virFileIsSharedFS(). More
will be added later. In order to achieve desired result, mocks
for setmntent() and statfs() need to be invented because the
first thing that virFileIsSharedFS() does is calling the latter.
If it finds a FUSE mount it'll call the former.
The mock might look a bit complicated, but in fact it's quite
simple. The test sets LIBVIRT_MTAB env variable to hold the
absolute path to a file containing mount table. Then, statfs()
returns matching FS it finds, and setmntent() is there just to
replace /proc/mounts with the file the test wants to load.
Adding this test also exposed a bug we have - because we assume
the given path points to a file we cut off what we assume is a
file name to obtain directory path and only then we call
statfs(). This is buggy because the passed path could be already
a mount point.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Because of lacking virTestCounterReset() call, the old test cases
name was preserved.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
-net name= will be deprecated in QEMU 3.1:
commit 101625a4d4ac7e96227a156bc5f6d21a9cc383cd
net: Deprecate the "name" parameter of -net
git describe: v3.0.0-791-g101625a4d4
Use the id option instead, supported since QEMU 1.2:
commit 6687b79d636cd60ed9adb1177d0d946b58fa7717
convert net_client_init() to OptsVisitor
git describe: v1.0-3564-g6687b79d63 contains: v1.2.0-rc0~142^2~8
Thankfully, libvirt only uses -net for non-PCI, non-virtio NICs
on ARM.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
While the idea was good the implementation not so much as we need to
take into account the old disk data and the new source. The code will be
consolidated later in a different way.
This reverts commit 663b1d55de.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
We need to configure multiple env variables for each set of tests so
create helper functions to do that.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to create the cgroup v2 sysfs the same way as we do for
cgroup v1.
This introduces new VIR_CGROUP_MOCK_MODE env variable which will
configure which cgroup mode each test requires. There are three
different modes:
- legacy: only cgroup v1 is available and it's the default mode
- hybrid: both cgroup v1 and cgroup v2 are available and have some
controllers
- unified: only cgroup v2 is available
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove the trailing '/' from prefix. This change is required in order
to introduce tests for unified cgroups. They are usually mounted in
'/sys/fs/cgroup'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It's possible that the @outbuf and/or @errbuf could be NULL
and thus we need to use the right comparison macro.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than initialize actualconfig and expectconfig before
having the possibility that libxlDriverConfigNew could fail
and thus land in cleanup, let's just move them and return
immediately upon failure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
While unlikely, sysconf(_SC_CLK_TCK) could fail leading to
indeterminate results for the subsequent division. So let's
just remove the # define and inline the same change.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The preferred location for setting the nested CPU flag changed in
Xen 4.10 and is advertised via the LIBXL_HAVE_BUILDINFO_NESTED_HVM
define. Commit 95d19cd0 changed libxl to use the new preferred
location but unconditionally changed the tests, causing 'make check'
failures against Xen < 4.10 that do not contain the new location.
Commit e94415d5 fixed the failures by only running the tests when
LIBXL_HAVE_BUILDINFO_NESTED_HVM is defined. Since libvirt supports
several versions of Xen that use the old nested location, it is
prudent to test the flag is set correctly. This patch reintroduces
the tests for the legacy location of the nested setting.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 95d19cd unconditionally adjusted the tests to account for
the conditional move of the nested_hvm setting location.
Run the affected tests only for the new setup (witnessed by
LIBXL_HAVE_BUILDINFO_NESTED_HVM).
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
With the introduction of cgroup v2 there are new names used with
cgroups based on which version is used:
- legacy: cgroup v1
- unified: cgroup v2
- hybrid: cgroup v1 and cgroup v2
Let's use 'legacy' instead of 'cgroupv1' or 'controllers' in our code.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to update one test-case because now new cgroup object will be
created only if there is any cgroup backend available.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will be required once cgroup v2 is introduced. The cgroup
detection is not simple and we will have multiple backends so we
should not just jump into the middle of the detection code.
In order to use virCgroupNewSelf we need to create all the remaining
data files:
- {name}.cgroups represents /proc/cgroups, it is a list of cgroup
controllers compiled into kernel
- {name}.self.cgroup represents /proc/self/cgroup, it describes
cgroups to which the process belongs
For "no-cgroups" we need to modify the expected behavior because
virCgroupNewSelf() will fail if there are no controllers available.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Because we can set which files to return for cgroup tests there
is no need to have special function tailored to run tests.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all the cgroup data into separate files out of vircgroupmock.c
and rework the fopen function to load data from files. This will
make it easier to add more test cases.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If available, use b_info->nested_hvm instead of
b_info->u.hvm.nested_hvm. This will make nested HVM config available
also for PVH domains.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Otherwise starting PVH guest will result in "arch_setup_bootlate:
mapping shared_info failed (pfn=..., rc=-1, errno: 12): Internal error".
After this change the behavior is the same as in `xl`.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Coverity noted that each of the fmemopen called used the strlen value
in order to allocate space, but that neglected space for terminating
null string. So just add 1 to the strlen.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
A bunch of SCSI test cases in qemuxml2argv used
DO_TEST(...
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI,
...);
instead of the intended
DO_TEST(...
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
...);
which is used correctly in qemuxml2xml. Fix them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're only ever passing a single binary when calling this
function, so we can remove all code dealing with the
possibility of a second binary being specified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
virCapabilitiesAddGuestDomain() takes an optional binary
name: this is intended for cases where a certain domain
type can't use the default one registered for the guest
architecture, but has to use a special binary instead.
The current code, however, will pass 'binary' again when
'kvmbin' is not defined, which is unnecessary as 'binary'
has been registered as default earlier, and will result
in capabilities output such as
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<domain type='qemu'/>
<domain type='kvm'>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
</domain>
with the second <emulator> element providing no additional
information.
Change it so that, when 'kvmbin' is not defined, NULL is
passed and so the default emulator will be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch is introducing cache monitor(CMT) to cache and
memory bandwidth monitor(MBM) for monitoring CPU memory
bandwidth.
The host capability of the two monitors is also introduced
in this patch.
For CMT, the host capability is shown like:
<host>
...
<cache>
<bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'>
<control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/>
</bank>
<monitor level='3' 'reuseThreshold'='270336' maxMonitors='176'>
<feature name='llc_occupancy'/>
</monitor>
</cache>
...
</host>
For MBM, the capability is shown like this:
<host>
...
<memory_bandwidth>
<node id='1' cpus='6-11'>
<control granularity='10' min ='10' maxAllocs='4'/>
</node>
<monitor maxMonitors='176'>
<feature name='mbm_total_bytes'/>
<feature name='mbm_local_bytes'/>
</monitor>
</memory_bandwidth>
...
</host>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
The libxl_domain_config_from_json API appeared in Xen 4.5, hence
there is no need to check for its existence after changing the
minimum supported Xen version to 4.6. Remove the check and its
use in the tests.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU commits:
e37a5c7fa4 (v2.12.0)
i386: Add Intel Processor Trace feature support
c2f193b538 (v2.7.0)
target-i386: Add support for UMIP and RDPID CPUID bits
aff9e6e46a (v2.12.0)
x86/cpu: Enable new SSE/AVX/AVX512 cpu features
f77543772d (v2.9.0)
x86: add AVX512_VPOPCNTDQ features
5131dc433d (v3.1.0)
i386: Add CPUID bit for PCONFIG
59a80a19ca (v3.1.0)
i386: Add CPUID bit for WBNOINVD
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Now that we know what metadata lock manager user wishes to use we
can load it when initializing security driver. This is achieved
by adding new argument to virSecurityManagerNewDriver() and
subsequently to all functions that end up calling it.
The cfg.mk change is needed in order to allow lock_manager.h
inclusion in security driver without 'syntax-check' complaining.
This is safe thing to do as locking APIs will always exist (it's
only backend implementation that changes). However, instead of
allowing the include for all other drivers (like cpu, network,
and so on) allow it only for security driver. This will still
trigger the error if including from other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
So far the virLockSpaceAcquireResource() locks the first byte in
the underlying file. But caller might want to lock other range.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The directory has been renamed in 562990849a, but a
reference to it was not updated at the same time, causing
'make dist' to fail ever since. Fix it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
It was already available in 1.5.0.
Moreover, we're not even formatting it on the QEMU command
line, ever: we just use it as part of some logic that decides
whether KVM support should be advertised, and as it turns out
that logic is actually buggy and dropping this capability
fixes it.
https://bugzilla.redhat.com/show_bug.cgi?id=1628469
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
More specifically, everything that's tested by qemucapabilities
now goes through qemucaps2xml as well.
Ideally we'll rewrite both so that listing all test cases is
unnecessary and they get picked up automatically by listing the
contents of the input directory instead, but that's a refactor
for another day :)
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
While qemucaps2xml has a meager two test cases to its name, we
have plenty of data from qemucapabilities which is taken from
actual QEMU binaries, covers pretty much all supported QEMU
versions and architectures and is even in the right format already!
Rewrite qemucaps2xml so that it uses qemucapabilities data as
input. Right now we have a single test case, but we're going to
add a lot more next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
After removing the host CPU model re-computation,
this function is no longer necessary.
This reverts commits:
commit d0498881a0
virQEMUCapsFreeHostCPUModel: Don't always free host cpuData
commit 5276ec712a
testUpdateQEMUCaps: Don't leak host cpuData
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Make it obvious when it is used intentionally and error
out when used in combination with real capabilities.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
None of the things testUpdateQEMUCaps adjusts are applicable
for tests that use the DO_TEST_CAPS macros, i.e.
real QEMU capabilities parsed from the XML files:
The architecture must be chosen before we even open the caps
file, CPU models are already present and the expensive HostModel
computation was already done in virQEMUCapsLoadCache.
Introduce FLAG_REAL_CAPS and skip the whole testUpdateQEMUCaps
function for DO_TEST_CAPS.
This speeds up the test by 25 %
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that the function is only run if requested by
the FLAG_STEAL_VM flag, we know that missing data
is an error, not a request to skip the test.
The existence of the output file is now checked by
virTestCompareToFile, which allows usage of
the VIR_TEST_REGENERATE_OUTPUT=1 env variable
to generate new test cases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use the recently introduced flag as a witness.
This reduces the apparent number of test cases
to the real number of test cases.
Note that this does not suffer from the same problem
as commit 70255fa was fixing, because the condition
for running virTestRun does not depend on results
of previous tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use this macro to indicate the intention to also
run the XML->startup XML test.
It sets the newly introduced FLAG_STEAL_VM flag,
which is the new witness for the XML->argv test
to leave the VM object behind.
This will allow us to report proper errors in
XML->startup tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.
Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.
To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.
This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.
Resolves: https://bugzilla.redhat.com/1601318
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.5.0, which is our
minimum supported QEMU version these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.3.1 and we require
QEMU 1.5.0 these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced by commit <af204232>.
Made redundant by commit 1e9a083 which switched to using
qemuProcessCreatePretendCmd, where capabilities are filtered
in qemuProcessInit after being fetched from the cache.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit 0bdb704 renamed the corresponding xml->argv tests,
but due to the optimistic nature of xml->startup xml testing,
this test was quietly skipped.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1613737
When processing the inputvol for encryption, we need to handle
the case where the inputvol is encrypted. This then allows for
the encrypted inputvol to be used either for an output encrypted
volume or an output volume of some XML provided type.
Add tests to show the various conversion options when either input
or output is encrypted. This includes when both are encrypted.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 39cef12a9 altered/fixed the inputvol processing to create
a multistep process when using an inputvol to create an encrypted
output volume; however, it unnecessarily assumed/restricted the
inputvol to be of 'raw' format only.
Modify the processing code to allow the inputvol format to be checked
and used in order to create the encrypted volume.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 39015a6f3 modified the test to be more reliable/realistic,
but without checking the return status of virEventRunDefaultImpl
it's possible that the test could run infinitely.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Previous commits removed all capabilities from per-device property
probing for:
pci-assign
kvm-pci-assign
usb-host
scsi-generic
Remove them from the virQEMUCapsDeviceProps list and get rid of the
redundant device-list-properties QMP calls.
Note that 'pci-assign' was already useless, because the QMP version
of the device is called 'kvm-pci-assign', see libvirt commit 7257480
from 2012.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit 28b77657 in v1.0-rc4~21^2~8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit c29029d which was included in 1.5.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the bootindex argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the configfd argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Added by commit fc66c1603c and not used since.
Also, the device was present in QEMU 1.5.0 so this capability
will not be needed if we ever decide to implement usb-net support.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Attempting to use a chardev definition like
<serial type='unix'>
<target type='isa-serial'/>
</serial>
correctly results in an error being reported, since the source
path - a required piece of information - is missing; however,
the very similar
<serial type='unix'>
<target type='pci-serial'/>
</serial>
was happily accepted by libvirt, only to result in libvirtd
crashing as soon as the guest was started.
The issue was caused by checking the chardev's targetType
against whitelisted values from virDomainChrChannelTargetType
without first checking the chardev's deviceType to make sure
it is actually a channel, for which the check makes sense,
rather than a different type of chardev.
The only reason this wasn't spotted earlier is that the
whitelisted values just so happen to correspond to USB and
PCI serial devices and Xen and UML consoles respectively,
all of which are fairly uncommon.
https://bugzilla.redhat.com/show_bug.cgi?id=1609720
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A few qemuxml2xml tests for virtio-input devices are
missing the capabilities used for the corresponding
qemuxml2argv tests: this wasn't a problem until now
because capabilities were only checked at command line
generation time, but we're going to change that later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1622455
If a domain is configured to use <source type='file'/> under
<memoryBacking/> we have to honour that setting and produce
-mem-path on the command line. We are not doing so if domain has
no guest NUMA nodes nor hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new tests use DO_TEST_CAPS_ARCH_LATEST() with an input
XML describing a very simple headless guest and cover most
architectures and machine types we care about.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can add aarch64, ppc64 and riscv64 to the list of
supported architectures for the macro, since we have
capabilities data for all of them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-serial is an alias for virtio-serial-pci, which
should not have been used for a PCIe-less aarch64/virt
guest but it ended up being used anyway because the
virtio-mmio capability was missing and the algorithm
is buggy.
Fix the test case so that we can fix the algorithm next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current socket test is rather crazy in that it sets up a server
listening for sockets and then runs a client connect call, relying on
the fact that the kernel will accept this despite the application
not having called accept() yet. It then closes the client socket and
calls accept() on the server. On Linux accept() will always see that
the client has gone and so skip the rest of the code. On FreeBSD,
however, the accept sometimes succeeds, causing us to then go into
code that attempts to read and write to the client which will fail
aborting the test. The accept() never succeeds on FreeBSD guests
with a single CPU, but as you add more CPUs, accept() becomes more and
more likely to succeed, giving a 100% failure rate for the test when
using 8 CPUs.
This completely rewrites the test so that it is avoids this designed in
race condition. We simply spawn a background thread to act as the
client, which will read a byte from the server and write it back again.
The main thread can now properly listen and accept the client in a
synchronous manner avoiding any races.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The test code for UNIX and TCP sockets will need to be rewritten and
extended later, and will benefit from code sharing.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The expected output strings from the vshtabletest.c are created on a
modern Linux host where unicode printing support is very good. On older
Linux platforms, or non-Linux platforms, some unicode characters will
not be considered printable. While the vsh table alignment code will
stil do the right thing with escaping & aligning in this case, the
result will not match the test's expected output.
Since we know the code is working correctly, do a check with iswprint()
to validate the platform's quality and skip the test if it fails. This
fixes the test on FreeBSD platforms.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When switching the host architecture to something for which we do not
have any host CPU model defined, the mocked
virQEMUCapsProbeHostCPUForEmulator would just return the previous CPU
model resulting in strange combinations, such as "core2duo" host CPU
model in QEMU capabilities for "AArch64" architecture. It currently
doesn't break any test case, but we should fix it anyway to avoid future
surprises which would be quite hard to debug.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Test that we correctly accept 64-bit unsigned numbers for QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We expect to get numbers as big as ULLONG_MAX from QEMU,
add a test for them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of printing the whole JSON in error messages,
print just the test name.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This test gets its JSON docs from files.
Now that we have a 'name' field in testInfo, use it instead
of abusing the 'doc' field.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Give the testing function access to the test name instead of only
passing it to virTestRun.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 6534b3c4 tried to raise an error when there is no numa
nodes by setting access='shared' in the domain config, but added
a helper called from qemuDomainDeviceDefValidate instead of a
helper called from qemuDomainDefValidate for XML:
<memoryBacking>
<hugepages/>
<access mode='shared'/>
</memoryBacking>
Since there are no memory devices in the test XML, there would
be no validation failure, but the test added was still failing.
Investigating that it turns out that unnecessary XML elements
were causing the failure (no need for <video>, <graphics>,
<pm>, usb controller model "piix3-uhci", disk attribute for
"discard='unmap'", <serial>, <console>, <channel> and a
memballoon model). Removing all those before moving the method
caused the test to succeed.
So this patch moves the validation to the right place and
removes all the unnecessary XML pieces that were causing
a false validation failure.
https://bugzilla.redhat.com/show_bug.cgi?id=1448149#c14
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The reason of broken build was that centos and rhel use older version of
glibc. These versions of glibc on these platforms cannot work with newer
unicodes, thus causing functions iswprint() and wcwidth() return
unexpected values causing the vshtabletest to fail. Therefore, let's
replace the new unicode characters causing issues with some older ones
to fix the test suite, as the issue would still persist during runtime.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.
The name is based on comments in qemu/hw/riscv/virt.c:
RISC-V machine with 16550a UART and VirtIO MMIO
and in qemu/hw/char/serial.c:
QEMU 16550A UART emulation
along with the output of dmesg in the guest:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
base_baud= 230400) is a 16550A
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The architecture is new enough that we don't need to
concern ourselves with backwards compatibility in any
capacity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the generated testcase to test the generated command against the
QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Many of the parameters are omitted for NULL/0 situations. Change the
values for these cases so all the arguments are schema-checked.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically the argv -> xml convertor wanted the same default machine
as we'd set when parsing xml. The latter has now changed, however, to
use a default defined by libvirt. The former needs fixing to again
honour the default QEMU machine.
This exposed a bug in handling for the aarch64 target, as QEMU does not
define any default machine. Thus we should not having been accepting
argv without a -machine provided.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virQEMUCapsGetDefaultMachine() method doesn't get QEMU's default
machine any more, instead it gets the historical default that libvirt
prefers for each arch. Rename it, so that the old name can be used for
getting QEMU's default.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't honour the QEMU default machine type anymore, always using the
libvirt chosen default instead. The QEMU argv parser, however, will need
to know the exacty QEMU default, so we must record that info.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
'metadata' and 'leases' are features internal to libvirt and thus don't
influence the generated QEMU command line. As they are not tested we
don't need the output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now we assume the flag always so there's no use for this test. Probably
a leftover from the cleanup of the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The test files were unused, but we don't have any other test for this
feature. Make use of the existing files by removing disks and using
DO_TEST_CAPS_LATEST to execute them. The legacy output files will be
dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
aarch64-acpi-nouefi and hostdev-scsi-boot are unused. Noticed when
checking whether '-nodefconfig' is still used by libvirt.
Unused since their introduction in commit deb38c4 and bab6ee6
respectively.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was usable since qemu 1.3 so we can remove all the
detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All supported qemus support FD passing so modify the tests to test the
proper code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For versions where we can probe that the arguments are optional we can
perform the probing by a schema query rather than sending a separate
command to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For now, there are 9 test cases
- testVshTableNew: Creating table with empty header
- testVshTableHeader: Printing table with/without header
- testVshTableRowAppend: Appending row with various number of cells.
Only row with same number of cells as in header is accepted.
- testUnicode: Printing table with unicode characters.
Checking correct alignment.
- testUnicodeArabic: test opposite (right to left) writing
- testUnicodeZeroWidthChar
- testUnicodeCombiningChar
- testUnicodeNonPrintableChar,
- testNTables: Create and print varios types of tables - one column,
one row table, table without content, standart table...
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Instead of printing it straight in virsh, it creates table struct
which is filled with header and rows(domains). It allows us to know
more about table before printing to calculate alignment right.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
With blockdev we can use the full range of commands to manipulate the
tray and the medium separately. Implement monitor code for this.
Schema testing done in the qemumonitorjsontest allows us to verify that
we generate the commands correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The copy-on-read feature is expressed by adding a new node layer in
qemu when using -blockdev. Since we will keep these per-disk (as opposed
to per storage source) we need to store the appropriate node names in
the disk definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using -blockdev you need to use the qom path to refer to the disk
fronends. Add means for storing the path and getting it after restart.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to backing store indexes which will become stable eventually
we need also to be able to format and store in the status XML for later
use the index for the top level of the backing chain.
Add XML formatter, parser, schema and docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Node names for block objects in qemu need to be unique for an instance
of the qemu process. Add a counter to generate objects sequentially and
store it in the status XML so that we can restore it.
The helpers added allow to create new node names and reset the counter
after the VM process terminates.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a user configures the backing chain in the XML we should not ignore
it. We already do parse it but don't format it out. As a
safety-precaution don't attempt to format detected chain into the
inactive XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test data for nested backing chains with/without indexes (used in
status XMLs) which will excercise blockdev and the related work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The blockdev support will change existing approach to add disks to VMs
so all tests using the DO_TEST_CAPS_LATEST approach which have any disks
need to be forked so that the changes can be applied.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' field reported by 'query-block' is empty when -blockdev is
used. Add an argument which will allow matching disk by using the qdev
id so we can use this code with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' argument matches only the legacy drive alias. For blockdev
we need to set the throttling for a QOM id and thus we'll need to use
the 'id' field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuDomainAttachDeviceDiskLive to change the media in
qemuDomainChangeDiskLive as the former function already does all the
necessary steps to prepare the new medium.
This also allows us to turn qemuDomainChangeEjectableMedia static.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't use it for anything useful so it does not make much sense to
extract it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Print the differences in case when the expected data does not match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we're not saving the platform-specific data into a cache, we're
not going to populate the structure, which in turn will cause a crash
upon calling virNodeGetSEVInfo because of a NULL pointer dereference.
Ultimately, we should start caching this data along with host-specific
capabilities like NUMA and SELinux stuff into a separate cache, but for
the time being, this is a semi-proper fix for a potential crash.
Backtrace (requires libvirtd restart to load qemu caps from cache):
#0 qemuGetSEVInfoToParams
#1 qemuNodeGetSEVInfo
#2 virNodeGetSEVInfo
#3 remoteDispatchNodeGetSevInfo
#4 remoteDispatchNodeGetSevInfoHelper
#5 virNetServerProgramDispatchCall
#6 virNetServerProgramDispatch
#7 virNetServerProcessMsg
#8 virNetServerHandleJob
#9 virThreadPoolWorker
#10 virThreadHelper
https: //bugzilla.redhat.com/show_bug.cgi?id=1612009
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
So the procedure to detect SEV support works like this:
1) we detect that sev-guest is among the QOM types and set the cap flag
2) we probe the monitor for SEV support
- this is tricky, because QEMU with compiled SEV support will always
report -object sev-guest and query-sev-capabilities command, that
however doesn't mean SEV is supported
3) depending on what the monitor returned, we either keep or clear the
capability flag for SEV
Commit a349c6c21c added an explicit check for "GenericError" in the
monitor reply to prevent libvirtd to spam logs about missing
'query-sev-capabilities' command. At the same time though, it returned
success in this case which means that we didn't clear the capability
flag afterwards and happily formatted SEV into qemuCaps. Therefore,
adjust all the relevant callers to handle -1 on errors, 0 on SEV being
unsupported and 1 on SEV being supported.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
In order to test SEV we need real QEMU capabilities. Ideally, this would
be tested with -latest capabilities, however, our capabilities are
currently tied to Intel HW, even the 2.12.0 containing SEV were edited by
hand, so we can only use that one for now, as splitting the capabilities
according to the vendor is a refactor for another day. The need for real
capabilities comes from the extended SEV platform data (PDH, cbitpos,
etc.) we'll need to cache/parse.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
As advertised in the previous commit, we need the list of
accessed files to also contain action that caused the $path to
appear on the list. Not only this enables us to fine tune our
white list rules it also helps us to see why $path is reported.
For instance:
/run/user/1000/libvirt/libvirt-sock: connect: qemuxml2argvtest: QEMU XML-2-ARGV net-vhostuser-multiq
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The check-file-access.pl script is used to match access list
generated by virtestmock against whitelisted rules stored in
file_access_whitelist.txt. So far the rules are in form:
$path: $progname: $testname
This is not sufficient because the rule does not take into
account 'action' that caused $path to appear in the list of
accessed files. After this commit the rule can be in new form:
$path: $action: $progname: $testname
where $action is one from ("open", "fopen", "access", "stat",
"lstat", "connect"). This way the white list can be fine tuned to
allow say access() but not connect().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
So far we are setting only fake secret and storage drivers.
Therefore if the code wants to call a public NWFilter API (like
qemuBuildInterfaceCommandLine() and qemuBuildNetCommandLine() are
doing) the virGetConnectNWFilter() function will try to actually
spawn session daemon because there's no connection object set to
handle NWFilter driver.
Even though I haven't experienced the same problem with the rest
of the drivers (interface, network and node dev), the reasoning
above can be applied to them as well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This proves libvirt can now handle high socket_id and
core_id values correctly and ensures we won't introduce
regressions in this area.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The latter are no longer used by libvirt, and the former
never were; moreover, both have a corresponding *_list
file which we can manipulate very conveniently using our
bitmap APIs, so dropping them makes sure in the future
developers will look into that rather than trying to
parse the kernel binary bitmaps.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Some of the data dumps didn't include them; luckily,
we're not actually missing any information since we
can recreate them by looking at the corresponding
thread_sibilings files.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Add new XML section to report host's memory bandwidth allocation
capability. The format as below example:
<host>
.....
<memory_bandwidth>
<node id='0' cpus='0-19'>
<control granularity='10' min ='10' maxAllocs='8'/>
</node>
</memory_bandwidth>
</host>
granularity ---- granularity of memory bandwidth, unit percentage.
min ---- minimum memory bandwidth allowed, unit percentage.
maxAllocs ---- maximum memory bandwidth allocation group supported.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce a new section memorytune to support memory bandwidth allocation.
This is consistent with existing cachetune. As the example:
below:
<cputune>
......
<memorytune vcpus='0'>
<node id='0' bandwidth='30'/>
</memorytune>
</cputune>
vpus --- vpus subjected to this memory bandwidth.
id --- on which node memory bandwidth to be set.
bandwidth --- the memory bandwidth percent to set.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If a domain has hugepages configured and we're currently building
memory-backend-file for a nvdimm device that domain has we will
put hugepages path onto the command line. It should have been
nvdimm path configured in the XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit 9cf38263d0.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 4dd6054000.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit c31146685f.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 397447f805.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Previously we were ignoring "nodeset" attribute for hugepage pages
if there was no guest NUMA topology configured in the domain XML.
Commit <fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5> partially fixed
that issue but it introduced a somehow valid regression.
In case that there is no guest NUMA topology configured and the
"nodeset" attribute is set to "0" it was accepted and was working
properly even though it was not completely valid XML.
This patch introduces a workaround that it will ignore the nodeset="0"
only in case that there is no guest NUMA topology in order not to
hit the validation error.
After this commit the following XML configuration is valid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
</hugepages>
</memoryBacking>
but this configuration remains invalid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
<page size='1048576' unit='KiB'/>
</hugepages>
</memoryBacking>
The issue with the second configuration is that it was originally
working, however changing the order of the <page> elements resolved
into using different page size for the guest. The code is written
in a way that it expect only one page configured and always uses only
the first page in case that there is no guest NUMA topology configured.
See qemuBuildMemPathStr() function for details.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1591235
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We can safely validate the hugepage nodeset attribute at a define time.
This validation is not done for already existing domains when the daemon
is restarted.
All the changes to the tests are necessary because we move the error
from domain start into XML parse.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This use-case was broken by commit
<fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5>.
We allowed this configuration and it was working as expected therefore
we can consider it as regression. We should have never allowed such
configuration so now the best solution is in case of non-numa guest
silently ignore the 'nodeset' attribute if it's set to '0'.
That will be fixed by following patches.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This test case is currently working but it uncovers existing issue
in our code that the generated QEMU commandline uses the default 1G
hugepage instead of the 2M hugepage specified for exact node.
The issue in our code is that for non-numa guests we take into account
only the first hugepage. This will be fixed as invalid configuration
since it doesn't make any sense to set default and specific hugepage
for non-numa guest.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove unnecessary XML elements as well.
<numatune> for numa guest is tested by numatune-memnode test.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
From the args output you can see that the 'discard' feature is not
honored if you don't use hugepages, that is a bug, following patche
will fix it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There are couple of files that are the same in both
qemuxml2argvdata and qemuxml2xmloutdata directories. Link them
instead of having full copy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting from pc-q35-2.4 the floppy controller is not enabled by
default. Fix the version check so that it does not match 2.11 as being
2.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix regression introduced in <42fd5a58adb>. With q35 machine type which
requires the explicitly specified FDC we'd format twoisa-fdc
controllers to the command line as the code was moved to a place where
it's called per-disk.
Move the call back after formatting all disks and reiterate the disks to
find the floppy controllers.
This also moves the '-global' directive which sets up the default
ISA-FDC to the end after all the disks but since we are modifying the
properties it is safe to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The floppy drive command line is different on the q35 machine. Make sure
to test that both drives are supported and also multiple machine
versions as we generate the commandline differently.
Note that both output files show wrong command line which will be fixed
subsequently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was never set except for (stale) tests. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.
There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.
Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Testing with the latest capabilities is possible with the x86_64 centric
implemented macro CAPS_LATEST. The new macro CAPS_ARCH_LATEST provides
the user the ability to specify the desired architecture when testing with
the latest capabilities.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
If all we achieve is reducing the depth by one for a single
test case, the additional complexity (not to mention breaking
the principle of least surprise) is not worth it: let's use
simpler, more predictable code instead.
This basically reverts fec6e4c48c (with a few adjustments).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Introducing the pool as a noop. Integration inside the build
system. Implementation will be in the following commits.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The proper file that should be included is `sys/xattr.h` as that comes from
`glibc` and not `attr/xattr.h` which ships with the `attr` utility.
We're most probably not the only ones because `attr/xattr.h` added a #warning to
their include resulting in the following compilation errors:
In file included from securityselinuxlabeltest.c:31:0:
/usr/include/attr/xattr.h:5:2: error: #warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>" [-Werror=cpp]
#warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>"
^~~~~~~
In file included from securityselinuxhelper.c:37:0:
/usr/include/attr/xattr.h:5:2: error: #warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>" [-Werror=cpp]
#warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>"
^~~~~~~
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virRandomBits is implemented in terms of virRandomBytes. Although we
mock virRandomBytes to give a stable value, this is not sufficient to
make virRandomBits give a stable value. The result of virRandomBits will
vary depending on endianness. Thus we mock virRandomBits to return a
stable value directly.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This commit fixes a segmentation fault caused by missing conditional to
check if libxl configuration was properly created by the test. If the
configuration was not properly created, libxlDriverConfigNew() function
will return NULL and cause a segfault at cfg->caps = NULL during the
cleanup.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Jansson does not put a newline at the end of formatted JSON strings.
This breaks the qemucapsprobe utility as we need to keep the spacing so
that tests work. Add an explicit newline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 0f80c71822.
Turns out, our code relies on virCgroupFree(&var) setting
var = NULL.
Conflicts:
src/util/vircgroup.c: context because 94f1855f09 is not
reverted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Modify virUSBDeviceListAdd to take a double pointer to
virUSBDevicePtr as the second argument. This will enable usage
of cleanup macros upon the virUSBDevicePtr item which is to be
added to the list as it will be cleared by virInsertElementsN
upon success.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Modify virCgroupFree function signature to take a value of type
virCgroupPtr instead of virCgroupPtr * as the parameter.
Change the argument type in all calls to virCgroupFree function
from virCgroupPtr * to virCgroupPtr. This is a step towards
having consistent function signatures for Free helpers so that
they can be used with VIR_AUTOPTR cleanup macro.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
So every caller does the same: they use virStringListAdd() to add
new item into the list and then free the old copy to replace it
with new list. It's not very memory effective, nor environmental
friendly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The aim of this mock is to track if a test doesn't touch anything
in live system. Well, connect() which definitely falls into that
category isn't tracked yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The most important part is LIBVIRTD_PATH env var fix. It is used
in virFileFindResourceFull() from tests. The libvirtd no longer
lives under daemon/.
Then, libvirtd-fail test was still failing (as expected) but not
because of missing config file but because it was trying to
execute (nonexistent) top_builddir/daemon/libvirtd which
fulfilled expected outcome and thus test did not fail.
Thirdly, lcov was told to generate coverage for daemon/ dir too.
Fourthly, our compiling documentation was still suggesting to run
daemonn/libvirtd.
And finally, some comments in a systemtap file and a probes file
were still referring to daemon/libvirtd.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
SKIP_OSTYPE_CHECKS only hides some error reporting at this point,
so it can be foled into SKIP_VALIDATE
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This test was added in 2d40e2da7b to ensure LXC domains could be
defined correctly when caps probing was skipped due to SKIP_OSTYPE.
However we do caps probing unconditionally now, so this test case
is redundant
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We should still make an effort to fill in data, just not raise
an error if say an ostype/virttype combo disappeared from caps.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The comment says:
/* If the logic here seems fairly arbitrary, that's because it is :)
* This is duplicating how the code worked before
* CapabilitiesDomainDataLookup was added. We can simplify this,
* but it would take a bit of work because the test suite fails
* in numerous minor ways. */
Nowadays the test suite changes appear quite simple, just extending
test capabilities data a bit so that we aren't trying to define
invalid arch/os/virtType/machine combos
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Some tests use the same VM state multiple times in a row. But if we
failed loading the VM XML, subsequent tests crash on the NULL def
pointer
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Extend this existing test so that a case when IQN is provided is
tested too. Since a special iSCSI interface is created and its
name is randomly generated at runtime we need to link with
virrandommock to have predictable names.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some tests will want to pass their own callback data into the
testIscsiadmCbData callback. Introduce testIscsiadmCbData struct
to give this some form and order.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This struct has nothing to do with testIscsiadmCb() rather than
testISCSIGetSession(). Move it closer to the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce one basic test that tests the simplest case:
logging into portal without any IQN.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
After a new iSCSI interface is successfully set up, we issue a
sendtargets command. However, after 56057900dc we don't
update the host config which in turn makes login fail because
iscsiadm is unable to find any matching record for the interface.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When scanning for targets, iSCSI might give different results
depending on the interface used. This is basically just name of
config file under /etc/iscsi/ifaces to use. The file contains
initiator IQN thus different results claim.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemuagenttest also depends on JSON object key ordering:
Invalid value of argument 'vcpus' of command 'guest-set-vcpus':
expected '[{"logical-id":1,"online":false}]' got '[{"online":false,"logical-id":1}]'
Skip it as well.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We have several cases when a VM has multiple disks in the test files so
having another one without any interesting configuration is not
necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the authentication and ipv6 cases into the main test file. To allow
removal of the separate testing of the secure credential passing via the
'secret' object in qemu, use the DO_TEST_CAPS_VER macro with version
2.5.0 when the secret object is not supported by qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The xml2argv variant was unused. The xml2xml variant is redundant in
other tests for RBD.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move various different iSCSI configuration into one test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'unsafe' cache test into 'disk-cache' and remove all the
individual cases for one cache mode each.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'll aggregate testing of all cache modes in this test later on.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify most of the tests into a common test named disk-cdrom-network by
adding multiple cdroms. The 'http' test is dropped since there can be
only 4 cdroms.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Few disk tests were testing support for pure -drive command line
generation for disks now that we assume it for all qemu versions the
cases are obsolete.
Replacements:
disk-readonly-no-device -> disk-readonly-disk
disk-floppy-tray-no-device -> disk-floppy-tray
disk-cdrom-tray-no-device -> disk-cdrom-tray
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We also have disk-copy_on_read.xml which also tests the command line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When gnutls negotiates TLS 1.3 instead of 1.2, the order of messages
sent by the handshake changes. This exposed a logic bug in the test
suite which caused us to wait for the server to see handshake
completion, but not wait for the client to see completion. The result
was the client didn't receive the certificate for verification and the
test failed.
This is exposed in Fedora 29 rawhide which has just enabled TLS 1.3 in
its GNUTLS builds.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since QEMU 2.12, QEMU understands a new vfio-pci device option 'display'
which can be used to turn on display capabilities on vgpu-enabled
mediated devices, IOW emulated GPU devices like QXL will no longer be
needed with vgpu-enable mdevs.
QEMU defaults to 'auto' for the 'display' attribute, which is not
foolproof, so we need to play it safe here and default to display='off'
if this attribute wasn't provided in the XML explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU 2.12 introduced a new type of display for mediated devices using
vfio-pci backend which allows a mediated device to be used as a VGA
compatible device as an alternative to an emulated video device. QEMU
exposes this feature via a vfio device property 'display' with supported
values 'on/off/auto' (libvirt will default to 'off').
This patch adds the necessary bits to domain config handling in order to
expose this feature. Since there's no convenient way for libvirt to come
up with usable defaults for the display setting, simply because libvirt
is not able to figure out which of the display implementations - dma-buf
which requires OpenGL support vs vfio regions which doesn't need OpenGL
(works with OpenGL enabled too) - the underlying mdev uses.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU 2.12 introduced a new vfio-pci device option 'display=on/off/auto'.
This patch introduces the necessary capability.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since QEMU 2.10, it's possible to use a new type of display -
egl-headless which uses drm nodes to provide OpenGL support. This patch
adds a capability for that. However, since QEMU doesn't provide a QMP
command to probe it, we have to base the capability on specific QEMU
version.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add a second check for Jansson >= 2.8, which includes
fixes to preserve ordering of object keys.
Use this constant to guard tests that depend on stable ordering.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Yajl has not seen much activity upstream recently.
Switch to using Jansson >= 2.5.
All the platforms we target on https://libvirt.org/platforms.html
have a version >= 2.7 listed on the sites below:
https://repology.org/metapackage/jansson/versionshttps://build.opensuse.org/package/show/devel:libraries:c_c++/libjansson
Additionally, Ubuntu 14.04 on Travis-CI has 2.5. Set the requirement
to 2.5 since we don't use anything from newer versions.
Implement virJSONValue{From,To}String using Jansson, delete the yajl
code (and the related virJSONParser structure) and report an error
if someone explicitly specifies --with-yajl.
Also adjust the test data to account for Jansson's different whitespace
usage for empty arrays and tune up the specfile to keep 'make rpm'
working when bisecting.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The tls, x509 and x509verify options were deprecated in QEMU v2.5.0:
commit 3e305e4a4752f70c0b5c3cf5b43ec957881714f7
Author: Daniel P. Berrange <berrange@redhat.com>
ui: convert VNC server to use QCryptoTLSSession
Use the tls-creds-x509 object when available.
https://bugzilla.redhat.com/show_bug.cgi?id=1598167
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a test with QEMU 2.4.0 capabilites, as well as the latest caps.
The code paths for formatting TLS options will be altered and
2.4.0 is the newest version where QEMU_CAPS_OBJECT_TLS_CREDS_X509
is not supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The original capabilities didn't include a patched kernel for spectre,
SPICE gl support and had xen support enabled which we already have
dropped.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The 'simpleFunc' data structure is overwritten by the code generated
from the macros which initiate the tests. This means that most of the
tests would get NULL 'schema' member which means that the schema
validation would not take place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The debug output of the schema validator on success is not so
interesting that it should be printed when basic debugging is enabled.
Print it only when test debugging is set to 3 and more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
virQEMUQAPISchemaPathGet returns success when a given schema path was
not found but the returned object is set to NULL. This meant that we'd
call testQEMUSchemaValidate with the schemaroot being NULL which lead to
a crash if a mistyped monitor command was tested.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Use the new proper location for the read/write error policy selection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for specifying it with the -device frontend was added recently.
Add a capability for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add output arguments generated with the latest qemu capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add multiple drives with the various configurations rather than having
multiple tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow using -blockdev with RBD we need to support the recently added
RBD authentication.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Based on qemu commit ab3257c281c1a1a91da1090ac9e38ddd8f860c63
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add helpers that allow using the latest schema from the replies from an
actual qemu which are recorded for the purpose of the qemucapabilities
test instead of an unsynced copy stored in qemuqapischema.json.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are testing character devices so the disk is not necessary. Minimize
the configuration. This will prevent changes when switching to blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU uses a shorthand '-sdl' which maps to '-display sdl'. However, if
there are any options to be passed to SDL, the full command version must
be used. Everything seemingly worked for us until commit 5038b30043
introduced OpenGL support for SDL and added ',gl=on/off' option which as
mentioned above could have never worked with the shorthand version of
the command. Indeed starting a domain with an SDL display and OpenGL
enabled, QEMU produces a rather cryptic error:
-sdl: Could not open 'gl=on': No such file or directory
This patch provides fixes to both the SDL cmdline generation and the
test suite.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When support was adding for passing a pre-opened listener socket to UNIX
chardevs, it accidentally passed the listener socket for client mode
chardevs too with predictable amounts of fail resulting. This affects
libvirt when using QEMU >= 2.12
Expand the unit test coverage to validate that we are only doing FD
passing when operating in server mode.
https://bugzilla.redhat.com/show_bug.cgi?id=1598440
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU chardevs have a bug which makes the vhostuser backend complain
about lack of support for FD passing when validating the chardev.
While this is ultimately QEMU's responsibility to fix, libvirt needs to
avoid tickling the bug.
Simply disabling chardev FD passing just for vhostuser's chardev is
the most prudent approach, avoiding need for a QEMU version number
check.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we format the serial, geometry and error policy on the -drive
backend argument.
QEMU added the ability to set serial and geometry on the frontend in
the 1.2 release deprecating use of -drive, with support being deleted
from -drive in 3.0.
We keep formatting error policy on -drive for now, because we don't
ahve support for that with -device for usb-storage just yet.
Note that some disk buses (sd) still don't support -device. Although
QEMU allowed these properties to be set on -drive for if=sd, they
have been ignored so we now report an error in this case.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
testQemuMonitorJSONqemuMonitorJSONGetBlockStatsInfo added 4 replies but
only one was used. Additionally the comment stated that 7 replies are
going to be added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Starting with QEMU 2.9, encryption convert processing requires
a multi-step process in order to generate an encrypted image from
some non encrypted raw image.
Processing requires to first create an encrypted image using the
sizing parameters from the input source and second to use the
--image-opts, -n, and --target-image-opts options along with inline
driver options to describe the input and output files, generating
two commands such as:
$ qemu-img create -f luks \
--object secret,id=demo.img_encrypt0,file=/path/to/secretFile \
-o key-secret=demo.img_encrypt0 \
demo.img 500K
Formatting 'demo.img', fmt=luks size=512000 key-secret=demo.img_encrypt0
$ qemu-img convert --image-opts -n --target-image-opts \
--object secret,id=demo.img_encrypt0,file=/path/to/secretFile \
driver=raw,file.filename=sparse.img \
driver=luks,file.filename=demo.img,key-secret=demo.img_encrypt0
$
This patch handles the convert processing by running the processing
in a do..while loop essentially reusing the existing create logic and
arguments to create the target vol from the inputvol and then converting
the inputvol using new arguments.
This then allows the following virsh command to work properly:
virsh vol-create-from default encrypt1-luks.xml data.img --inputpool default
where encrypt1-luks.xml would provided the path and secret for
the new image, while data.img would be the source image.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1526382
Since commit c4eedd793 disallowed qcow2 encrypted images to be
used for domains, it no longer makes sense to allow a qcow2
encrypted volume to be created or resized.
Add a test that will exhibit the failure of creation as well
as the xml2xml validation of the format still being correct.
Update the documentation to note the removal of the capability
to create and use qcow/default encrypted volumes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
We're about to disallow creation of a qcow2 encrypted storage
volume, so let's remove the qcow encryption element from the
tests which are testing whether other format='qcow2' related
features work properly.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add the storagevolxml2xmltest "luks" and "luks-cipher" tests
to the storagevolxml2argvtest.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Allowing a NULL @secretPath for virStorageBackendCreateQemuImgCmdFromVol
would result in a generated command line with a dangling "file=" output.
So let's make sure the @secretPath exists before processing.
This means we should pass a dummy path from the storage test.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add comma escaping for netsource. This is done here because
qemuBuildNetworkDriveStr has other external callers which
may not expect an escaped comma; however, this particular
command building path needs to perform the escaping for the
hostdev command line, so we do it now to ensure src->path
and src->host->name are covered.
Signed-off-by: Anya Harter <aharter@redhat.com>
A typical XML representation of the virNWFilterBindingDefPtr struct
looks like this:
<filterbinding>
<owner>
<name>f25arm7</name>
<uuid>12ac8b8c-4f23-4248-ae42-fdcd50c400fd</uuid>
</owner>
<portdev name='vnet1'/>
<mac address='52:54:00:9d:81:b1'/>
<filterref filter='clean-traffic'>
<parameter name='MAC' value='52:54:00:9d:81:b1'/>
</filterref>
</filterbinding>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This doesn't seem very useful at the moment, but it will make
sense once we introduce another HPT-related setting.
The output XML is decoupled from the input XML in preparation
of future changes as well; while doing so, we can shave a few
lines off the latter.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This is a regression in behavior caused by commit 37359814. It was
intended to limit the schema to allow only a single subelement of
<rule>, but it is also acceptable for <rule> to have no subelement at
all.
To prevent the same error from reoccurring in the future, the
examples/xml/nwfilter directory was added to the list of nwfilter
schema test directories.
Resolves: https://bugzilla.redhat.com/1593549
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
VMs with hardcoded platform network devices are forced to use old
style '-net nic' command line config. Current we use qemu's vlan
option to hook this with the '-netdev' host side of things.
However since qemu 1.2 there is '-net nic,netdev=X' option for
explicitly referencing a netdev ID, which is more inline with
typical VM commandlines, so let's switch to that
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Since e6be524508 we include the executed command along
with the reply in *.replies files, which breaks the
renumbering logic implemented in qemucapsfixreplies.
Adapt the script so that it works with the new format.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add comma escaping for cfg->spiceTLSx509certdir and
graphics->data.spice.rendernode.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for smartcard->data.cert.file[i] and
smartcard->data.cert.database.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for dev->data.file.path in cases
VIR_DOMAIN_CHR_TYPE_DEV and VIR_DOMAIN_CHR_TYPE_PIPE.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add test case explicitly defining a smartcard host certificates
database via the following xml:
<smartcard mode='host-certificates'>
<database>/tmp/foo</database>
</smartcard>
This case is not currently covered in the test suite.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We only formatted the <sev> element when QEMU supported the feature when
in fact we should always format the element to make clear that libvirt
knows about the feature and the fact whether it is or isn't supported
depends on QEMU version, in other words if QEMU doesn't support the
feature we're going to format the following into the domain capabilities
XML:
<sev supported='no'/>
This patch also adjusts the RNG schema accordingly in order to reflect
the proposed change.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When testing a domain XML with TPM we overwrite UNIX socket path
to mimic what qemuTPMEmulatorPrepareHost() is doing (because
*PrepareHost() functions are not called from the test). But we
are not doing it fully - we need to set the chardev's type too so
that virDomainTPMDefFree() can free the path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Adjust the documentation, parser and tests to change:
launch-security -> launchSecurity
reduced-phys-bits -> reducedPhysBits
dh-cert -> dhCert
Also fix the headline in formatdomain.html to be more generic,
and some leftover closing elements in the documentation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use qemuMonitorTestNewFromFileFull which allows to test commands used
along with providing replies. This has two advantages:
1) It's easier to see which command was used when looking at the files
2) We check that the used commands are actually in the correct order
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Change the output of qemucapsprobe to record the commands used for
querying. This allows to easily identify which reply belongs to which
command and also will allow to test whether we use stable queries.
This change includes changing dropping of the QMP greeting from the file
and reformatting of the query and output to stdout.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The prettyfied output may sometimes contain empty lines which would
desynchonize the test monitor workers. The skipping code can be much
simplified though. Also a extract it so so that it's obvious what
it's doing and can be reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The test file can be broken up by newlines and is automatically
concatenated back. Fix the control flow so that the concatenation code
'continues' the loop rather than branching out.
Also add an anotation to the concatenation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
On EOF, the loop can be terminated right away since most of it is
skipped anyways and the handling of the last command is repeated after
the loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The test data for capabilities is obtained from two consecutive qemu
runs when the regular monitor object will be reset. Do the same for the
test monitor object which is not disposed between runs by calling
qemuMonitorResetCommandID.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU >= 2.12 provides 'sev-guest' object which is used to launch encrypted
VMs on AMD platform using SEV feature. The various inputs required to
launch SEV guest is provided through the <launch-security> tag. A typical
SEV guest launch command line looks like this:
-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 ...\
-machine memory-encryption=sev0 \
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The launch-security element can be used to define the security
model to use when launching a domain. Currently we support 'sev'.
When 'sev' is used, the VM will be launched with AMD SEV feature enabled.
SEV feature supports running encrypted VM under the control of KVM.
Encrypted VMs have their pages (code and data) secured such that only the
guest itself has access to the unencrypted version. Each encrypted VM is
associated with a unique encryption key; if its data is accessed to a
different entity using a different key the encrypted guests data will be
incorrectly decrypted, leading to unintelligible data.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU version >= 2.12 provides support for launching an encrypted VMs on
AMD x86 platform using Secure Encrypted Virtualization (SEV) feature.
This patch adds support to query the SEV capability from the qemu.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit id d8e8b63d introduced the test, but neglected to check for
error from virTestLoadFile in testCompareXMLToDomConfig.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
Introduced by commmit id 37bd4571c. Need to goto cleanup and
not return directly.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
Add missing data files for bhyve cpu topology tests that should have been
added in b66fda0a74.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
The default is stable per machine type so there should be no need to keep that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1469338
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For getting the reply I queried the newest and oldest QEMU using
test/qemucapsprobe. From the differences I only extracted the reply to the new
QMP command and discarded the rest. For all the versions below the one which
added support for the new option I used the output from the oldest QEMU release
and for those that support it I used the output from the newest one.
In order to make doubly sure the reply is where it is supposed to be (the
replies files are very forgiving) I added the property to all the replies files,
reran the tests again and fixed the order in replies files so that all the
versions are reporting the new capability. Then removed that one property.
After that I used test/qemucapsfixreplies to fix the reply IDs.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
TSEG (Top of Memory Segment) is one of many regions that SMM (System Management
Mode) can occupy. This one, however is special, because a) most of the SMM code
lives in TSEG nowadays and b) QEMU just (well, some time ago) added support for
so called 'extended' TSEG. The difference to the TSEG implemented in real q35's
MCH (Memory Controller Hub) is that it can offer one extra size to the guest OS
apart from the standard TSEG's 1, 2, and 8 MiB and that size can be selected in
1 MiB increments. Maximum may vary based on QEMU and is way too big, so we
don't need to check for the maximum here. Similarly to the memory size we'll
leave it to the hypervisor to try satisfying that and giving us an error message
in case it is not possible.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid problems with test cases specifying an alias machine type which
would change once capabilities for a newer version are added strip all
alias machine types for the DO_TEST_CAPS_LATEST based tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that all test cases with TEST_CHAIN were testing the same thing
twice drop one of them. Note that some of the cases were duplicate even
before dropping the image format probing tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Storage drivers now don't allow it so there's no need to test it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The second set of arguments for TEST_CHAIN always specifies the
'ALLOW_PROBE' flag. Make it part of the macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have a test case for QED disk image with autodetection but not with
the format explicitly specified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format probing will be dropped so remove the tests which will become
obsolete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Recently, bhyve started supporting specifying guest CPU topology.
It looks this way:
bhyve -c cpus=C,sockets=S,cores=C,threads=T ...
The old behaviour was bhyve -c C, where C is a number of vCPUs, is
still supported.
So if we have CPU topology in the domain XML, use the new syntax,
otherwise keep the old behaviour.
Also, document this feature in the bhyve driver page.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
The swtpm process now has --tpm2 as an additional parameter:
system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8 0.0 28364 3868 ? Rs 11:13 13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid
The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds extensions to existing test cases and specific test cases
for the tpm-emulator.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extend the QEMU capabilities with tpm-emulator support.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only define a TPM 1.2.
Extend the documentation.
Add a test case testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function exists because of 5276ec712a. But it is
missing initial check just like virQEMUCapsInitHostCPUModel()
has.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The default NBD TLS certificate path varies based on prefix given to
configure, causing tests to fail depending on build options.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since libvirt called bind() and listen() on the UNIX socket, it is
guaranteed that connect() will immediately succeed, if QEMU is running
normally. It will only fail if QEMU has closed the monitor socket by
mistake or if QEMU has exited, letting the kernel close it.
With this in mind we can remove the retry loop and timeout when
connecting to the QEMU monitor if we are doing FD passing. Libvirt can
go straight to sending the QMP greeting and will simply block waiting
for a reply until QEMU is ready.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a race condition when spawning QEMU where libvirt has spawned
QEMU but the monitor socket is not yet open. Libvirt has to repeatedly
try to connect() to QEMU's monitor until eventually it succeeds, or
times out. We use kill() to check if QEMU is still alive so we avoid
waiting a long time if QEMU exited, but having a timeout at all is still
unpleasant.
With QEMU 2.12 we can pass in a pre-opened FD for UNIX domain or TCP
sockets. If libvirt has called bind() and listen() on this FD, then we
have a guarantee that libvirt can immediately call connect() and
succeed without any race.
Although we only really care about this for the monitor socket and agent
socket, this patch does FD passing for all UNIX socket based character
devices since there appears to be no downside to it.
We don't do FD passing for TCP sockets, however, because it is only
possible to pass a single FD, while some hostnames may require listening
on multiple FDs to cover IPv4 and IPv6 concurrently.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU >= 2.12 will support passing of pre-opened file descriptors for
socket based character devices.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that GnuTLS is a requirement, we can drop a lot of
conditionally built code. However, not all ifdef-s can go because
we still want libvirt_setuid to build without gnutls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since GnuTLS is required there is no way to go with !WITH_GNUTLS
branch and just distribute these files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that virCryptoGenerateRandom() is plain wrapper over
virRandomBytes() we can drop it in favour of the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To unify our vir*Random() functions we need to make
virCryptoGenerateRandom NOT allocate return buffer. It should
just fill given buffer with random data.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In libvirt when a function wants to return an error code it
should be a negative value. Returning a positive value (or zero)
means success. But virRandomBytes() does not follow this rule.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add code that will handle the managed persistent reservations object
separately from the unmanaged one. There is only one managed object so
handling it with disks is awkward and does not scale well when backing
chains come into view.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the old qcow2 encryption is removed we can safely delete all
this code since it's not needed any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The encryption was buggy and qemu actually dropped it upstream. Forbid
it for all versions since it would cause other problems too.
Problems with the old encryption include weak crypto, corruption of
images with blockjobs and a lot of usability problems.
This requires changing of the encryption type for the encrypted disk
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To keep feature parity, we need to be able to format the PR manager
alias when using blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop the 'vxhs' suffix so other network protocols using TLS can be
put into the same test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the call to the validating function from the function which sets
stuff up.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the function to just prepare data for the disk. Callers need to
do the looping since there's more to do than just copy the data around.
The code path in qemuDomainPrepareDiskSource doesn't need to loop over
the chain yet, since there currently is no chain at this point. This
will be addressed later in the blockdev series where we will setup much
more stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When restarting libvirt would previously lose the alias of the x509
certificate object. Upon unplug we would then not delete the
corresponding objects.
Restore the alias if we know it should be there.
Luckily for disks we don't support encrypted TLS environment, so there's
no need to regenerate the 'secret' alias for decryption.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt uses the stored alias to detach the TLS x509 object on disk
unplug. As the alias was not stored, the object would not be detached
if unplugging disks after libvirtd restart.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously we did not store the aliases but rather re-generated them
when unplug was necessary. This is very cumbersome since the knowledge
when and which alias to use needs to be stored in the hotplug code as
well.
While this patch will not strictly improve this situation since there
still will be two places containing this code it at least will allow to
remove the mess from the disk-unplug code and will prevent introducing
more mess when adding blockdev support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add tests for upcoming re-generation of aliases for the secret objects
used by qemu when upgrading libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than trying to figure out which alias was used, store it in the
status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The next patch will forbid the old qcow2 encryption completely. Remove
it from the tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the disk encryption type to qcow2+luks so that the appropriate
secret objects are generated. This tests that the proper alias is used
for the passphrase secret object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The disk encryption part is no way relevant to the rest of the test so
drop it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 656151bf fixed formatting of the <cmdline> element. Perhaps it
would have been noticed and fixed earlier if we had a test. With this
change, all possible cases of formatting <cmdline> from xmconfig are
covered
1. no 'extra=' or 'root=' in xm.cfg
2. 'extra=' but no 'root=' in xm.cfg
3. 'root=' but no 'extra=' in xm.cfg
4. both 'root=' and 'extra=' in xm.cfg
Case 1 is covered by all existing paravirt tests since they have no
'extra=' or 'root='. Case 2 is covered by adding 'extra=' to a few
of the existing paravirt tests. Cases 3 and 4 are covered by new
tests that only test conversion of xm.cfg to xml.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
My commit b8b42ca added support for formatting the vsock
command line without actually checking if it's supported.
Add it to the per-device validation function.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
To avoid the <source> vs. <target> confusion,
change <source auto='no' cid='3'/> to:
<cid auto='no' address='3'/>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When preparing qemuCaps for test cases the following is
happening:
qemuTestParseCapabilitiesArch() is called, which calls
virQEMUCapsLoadCache() which in turn calls
virQEMUCapsInitHostCPUModel() which sets qemuCaps->kvmCPU and
qemuCaps->tcgCPU.
But then the code tries to update the capabilities:
testCompareXMLToArgv() calls testUpdateQEMUCaps() which calls
virQEMUCapsInitHostCPUModel() again overwriting previously
allocated memory. The solution is to free host cpuData in
testUpdateQEMUCaps().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There's no point in calling testInitQEMUCaps() (which sets
info.qemuCaps) only to overwrite (and leak) it on the very next
line.
==12962== 296 (208 direct, 88 indirect) bytes in 1 blocks are definitely lost in loss record 265 of 331
==12962== at 0x4C2CF26: calloc (vg_replace_malloc.c:711)
==12962== by 0x5D28D9F: virAllocVar (viralloc.c:560)
==12962== by 0x5D96AB4: virObjectNew (virobject.c:239)
==12962== by 0x56DB7C7: virQEMUCapsNew (qemu_capabilities.c:1480)
==12962== by 0x112A5B: testInitQEMUCaps (qemuxml2argvtest.c:361)
==12962== by 0x1371C8: mymain (qemuxml2argvtest.c:2871)
==12962== by 0x13AD0B: virTestMain (testutils.c:1120)
==12962== by 0x1372FD: main (qemuxml2argvtest.c:2883)
Removing the function call renders @gic argument unused therefore
it's removed from the macro (and all its callers).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Found by cppcheck:
[tests/metadatatest.c:284]: (error) Uninitialized variable: test
[tests/objecteventtest.c:855]: (error) Uninitialized variable: test
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Create a new vsock endpoint by opening /dev/vhost-vsock,
set the requested CID via ioctl (or assign a free one if auto='yes'),
pass the file descriptor to QEMU and build the command line.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a new 'vsock' element for the vsock device.
The 'model' attribute is optional.
A <source cid> subelement should be used to specify the guest cid,
or <source auto='yes'/> should be used.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move the check for boot elements into a separate function
and remove its dependency on the parser-supplied bootHash table.
Reconstructing the hash table from the domain definition
effectively duplicates the check for duplicate boot order
values, also present in virDomainDeviceBootParseXML.
Now it will also be run on domains created by other means than XML
parsing, since it will be run even for code paths that did not supply
the bootHash table before.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When computing a baseline CPU for a specific hypervisor we have to make
sure to include only CPU features supported by the hypervisor. Otherwise
the computed CPU could not be used for starting a new domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This is required for virCPUBaseline to accept a list of guest CPU
definitions since they do not have arch set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
The virDomainDetachDeviceAlias API is designed so that it only
sends detach request to qemu. It's user's responsibility to wait
for DEVICE_DELETED event, not libvirt's. Add @async flag to
qemuDomainDetach*Device() functions so that caller can chose if
detach is semi-synchronous (old virDomainDetachDeviceFlags()) or
fully asynchronous (new virDomainDetachDeviceFlags()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1566416
Commit id 'fe2af45b' added output for logical_block_size and
num_blocks for both removeable and fixed storage, but did not
update the nodedev capability causing virt-xml-validate to fail.
It's listed as optional only because it only prints if the
sizes are > 0. For a CDROM drive the values won't be formatted.
Update the nodedevxml2xmltest in order to output the values
for storage based on the logic from udevProcessRemoveableMedia
and udevProcessSD with respect to the logical_blocksize and
num_blocks calculations.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1572491
Commit id '02129b7c0' added a single pagesElem for slightly
different purposes. One usage was an output for host page size
listing and the other for NUMA supported page sizes. For the
former, only the pages unit and size are formatted, while for
the latter the pages unit, size, and availability data is formatted.
The virt-xml-validate would fail because it expected something
extra in the host page size output. So split up pagesElem a bit
and create pagesHost and pagesNuma for the differences.
Modify some capabilityschemadata output to have the output - even
though the results may not be realistic with respect to the
original incarnation of the data.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1572491
Commit id 'd2440f3b5' added printing the <microcode> for the
capabilities, but didn't update the capabilities schema.
While at it, update capabilityschemadata for caps-test2
and caps-test3 to output some value for validation.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1572491
Commit id 'b3fd95e36' added rdma as a valid option for
virCapabilitiesAddHostMigrateTransport, but didn't update
the capabilities schema resulting in possible virt-xml-validate
failure.
While at it, update the capabilityschemadata for caps-qemu-kvm
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
Commit id 'e4938ce2f' changed the esx_driver to use 'vpxmigr'
instead of esx for virCapabilitiesAddHostMigrateTransport, so
update the capabilities to allow virt-xml-validate to pass and
update the test to use the newer name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1572491
Commit id '78661cb' added a physical output, but failed to update
the schema resulting in a failure from virt-xml-validate.
While at it - update the storagevolschemadata for the output.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
Report domaincaps <features><genid supported='yes'/> if the guest
config accepts <genid/> or <genid>$GUID</genid>.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1149445
If the domain requests usage of the genid functionality,
then add the QEMU '-device vmgenid' to the command line
providing either the supplied or generated GUID value.
Add tests for both a generated and supplied GUID value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add the query of the device objects for the vmgenid device
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The VM Generation ID is a mechanism to provide a unique 128-bit,
cryptographically random, and integer value identifier known as
the GUID (Globally Unique Identifier) to the guest OS. The value
is used to help notify the guest operating system when the virtual
machine is executed with a different configuration.
This patch adds support for a new "genid" XML element similar to
the "uuid" element. The "genid" element can have two forms "<genid/>"
or "<genid>$GUID</genid>". If the $GUID is not provided, libvirt
will generate one and save it in the XML.
Since adding support for a generated GUID (or UUID like) value to
be displayed modifying the xml2xml test to include virrandommock.so
is necessary since it will generate a "known" value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
We don't use the text monitor since we dropped support for pre-JSON
qemus. Drop the test so that we can later delete the text monitor
support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability also represents that 'blockdev-add' is functional. It's
necessary to detect it via presence of 'blockdev-del' since blockdev-add
did not have the unsupported 'x-blockdev-add' version previously and
thus would be marked as present even if we could not use it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reference the storage via node name rather than inlining it. This is
the approach that will be used with -blockdev/blockdev-add since it
allows more control and is more future proof.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 766d5c1b deprecated the capability, because we were assuming
it for every QEMU binary. At the time of the introduction, there
was no way to probe for this via QMP.
However since QEMU 1.5.0 (which is the earliest version we support)
we can rely on the query-command-line-options command to detect this
feature.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1534418
Just like ec982f6d92 denies hugepages for non-existent
guest NUMA nodes in case there are some nodes configured.
Unfortunately, when there are none, qemuBuildNumaArgStr() is not
called and thus we have to have check in qemuBuildMemPathStr()
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The JSON property generator should not escape commas as we do on the
command line. The JSON->commandline generator already does that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have to escape commas when formatting them on the command line. Add a
test case of a TLS path containing a comma.
Note that the output is wrong, this test case is to prove there's a bug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to virDomainScreenshot() documentation, screens are
numbered sequentially. e.g. having two graphics cards, both with
four heads, screen ID 5 addresses the second head on the second
card.
But apart from that, there's nothing special happening here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As of v2.12.0-rc0~32^2 QEMU is capable specifying which display
device and head should the screendump be taken from. Track this
capability so that we can use it later in our virDomainScreenshot
API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Let us update the existing xml and replies files for QEMU 2.12.0 on
s390x.
Used a z14 using a QEMU 2.12 GA build and the following sequence:
tests/qemucapsprobe /usr/bin/qemu-system-s390x > \
tests/qemucapabilitiesdata/caps_2.12.0.s390x.replies
VIR_TEST_REGENERATE_OUTPUT=1 tests/qemucapabilitiestest
VIR_TEST_REGENERATE_OUTPUT=1 tests/domaincapstest
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Everything can be disabled by not using the parent element. There's no
need to store this explicitly. Additionally it does not add any value
since any configuration is dropped if enabled='no' is configured.
Drop the attribute and adjust the code accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Disk source definition should be validated in
qemuDomainValidateStorageSource rather than in individual generators of
command line arguments.
Change to the XML2XML test is required since now the definition is
actually validated at define time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Support OpenGL when using SDL backend via -sdl,gl=on. Add associated
tests.
NB: Usage of DO_TEST_CAPS_LATEST in qemuxml2argv doesn't work in
this case because -sdl gl is not introspectable.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Support OpenGL acceleration capability when using SDL graphics.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Support OpenGL accelerated rendering when using SDL graphics in the
domain config. Add associated test and documentation.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In a lot of our mocks (if not all of them) we use our internal
APIs (e.g. VIR_ALLOC). So far, we're relying on test binary that
links with the mock to drag in libvirt.so. Well, this works only
partially. Firstly, whatever binary we execute from tests will
fail (e.g. as Martin reported on the list ./qemucapsprobe fails
to execute qemu). Secondly, if there's a program that tries to
validate linking (like valgrind is doing) it fails because of
unresolved symbols.
Because of that we have to link our mocks with libvirt.so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Generates the QEMU command line for the vfio-ccw device.
Adds various functionality testing for vfio-ccw in libvirt:
1. Generation of QEMU command line from domain xml file
2. Generation of dump xml from domain xml file
3. Checks duplicate/invalid addresses for vfio-ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.
Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let us introduce the capability vfio-ccw for supporting the basic
channel I/O passthrough, which have been introduced in QEMU 2.10. The
current focus is to support dasd-eckd (cu_type/dev_type = 0x3990/0x3390)
as the target device.
Let us also introduce the capability QEMU_CAPS_CCW_CSSID_UNRESTRICTED
for virtual-css-bridge. This capability is based on the
cssid-unrestricted property which exists if QEMU no longer enforces
cssid restrictions based on ccw device types.
Vfio-ccw capability is dependent on the hidden virtual-css-bridge, so
that we are able to probe for the cssid-unrestriced property to make
sure the devices are visible to non-mcss-e enabled guests.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let us introduce the capability QEMU_CAPS_CCW for virtual-css-bridge
and replace QEMU_CAPS_VIRTIO_CCW with QEMU_CAPS_CCW in code segments
which identify support for ccw devices.
The virtual-css-bridge is part of the ccw support introduced in QEMU 2.7.
The QEMU_CAPS_CCW capability is based on the existence of the QEMU type.
Let us also add the capability QEMU_CAPS_CCW to the tests which
require support for ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1480668
QEMU has this new feature memory-backend-file.discard-data=yes
which is a nifty optimization. Basically, when qemu is quitting
or on memory hotplug it calls munmap() and close() on the file
that is backing the memory. However, this does not mean kernel
won't stop touching that part of memory. It still might. With
this feature enabled we tell kernel: "we don't need this memory
nor data stored in it". This makes kernel drop the memory
immediately without trying to sync memory with the mapped file.
Unfortunately, this cannot be turned on by default because we
can't be sure when users really don't care about what happens to
data after qemu dies. So it has to be opt-in. As usual, there are
three places where one can configure memory attributes. This
patch adds the feature to all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU has possibility to call madvise(.., MADV_REMOVE) in some
cases. Expose this feature to users by new element/attribute
discard.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks if memory-backend-file has discard-data
attribute or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks if qemu has "qom-list-properties" monitor
command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For command line we need two things:
1) -object pr-manager-helper,id=$alias,path=$socketPath
2) -drive file.pr-manager=$alias
In -object pr-manager-helper we tell qemu which socket to connect
to, then in -drive file-pr-manager we just reference the object
the drive in question should use.
For managed PR helper the alias is always "pr-helper0" and socket
path "${vm->priv->libDir}/pr-helper0.sock".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:
<reservations enabled='yes' managed='no'>
<source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
</reservations>
If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:
https://www.redhat.com/archives/libvir-list/2017-November/msg01005.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than have virJSONValueArraySize return a -1 when the input
is not an array and then splat an error message, let's check for
an array before calling and then change the return to be a size_t
instead of ssize_t.
That means using the helper virJSONValueIsArray as well as using a
more generic error message such as "Malformed <something> array".
In some cases we can remove stack variables and when we cannot,
those variables should be size_t not ssize_t. Alter a few references
of if (!value) to be if (value == 0) instead as well.
Some callers can already assume an array is being worked on based
on the previous call, so there's less to do.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make sure that 'host_device' is generated for type='block'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The test cases would correspond to the following -drive command lines:
file-backing_basic-detect.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,detect-zeroes=on
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-backing_basic-unmap-detect.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=unmap,detect-zeroes=unmap
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-backing_basic-unmap-ignore.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=ignore,detect-zeroes=on
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-backing_basic-unmap.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=unmap
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
iscsi and rbd support authentication of the connection. Combine it with
encryption of qcow2.
The top level disk image would generate the following '-drive' cmdline:
-drive file=rbd:rbdpool/rbdimg:id=testuser-rbd:auth_supported=cephx\;none:
mon_host=host1.example.com\;host2.example.com,
file.password-secret=node-a-s-secalias,encrypt.format=luks,
encrypt.key-secret=node-b-f-encalias,format=qcow2,
if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add tests for backing chain handling, including a very long chain which
is fully specified in the XML and an unterminated chain.
The top level disk image would generate the following '-drive':
file-qcow2-backing-chain-encryption.xml:
-drive file=/var/lib/libvirt/images/a,encrypt.format=luks,
encrypt.key-secret=node-b-f-encalias,format=qcow2,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-qcow2-backing-chain-noopts.xml:
-drive file=/var/lib/libvirt/images/rhel7.3.1507297895,format=qcow2,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-qcow2-backing-chain-unterminated.xml:
-drive file=/var/lib/libvirt/images/rhel7.3.1507297895,format=qcow2,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Apart from adding test data add a function which sets up fake secrets
for the test.
The top level disk image would generate the following '-drive' cmdline:
-drive file=/path/luks.img,key-secret=test1-encalias,format=luks,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Test that the 'aio' option is applied correctly for the 'file' protocol
backend and across the backing chain.
The top level disk image would generate the following '-drive' cmdline:
file-backing_basic-aio_threads:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,aio=threads
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-raw-aio_native:
-drive file=/path/to/i.img,format=raw,if=none,id=drive-dummy,cache=none,aio=native
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=on
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Test mapping of the 'FAT' disk format to 'vvfat' in qemu.
The top level disk image would generate the following '-drive' cmdline:
dir-fat-readonly.xml:
-drive file=fat:/var/somefiles,if=none,id=drive-dummy,readonly=on
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
dir-fat-floppy.xml
-drive file=fat:floppy:/var/somefiles,if=none,id=drive-dummy,readonly=on
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Formats supporting backing chain such as qed, vmdk, don't have any other
parameters than the backing store and 'qcow' has only encryption params
which will be tested extra. Add this test case so they are covered since
any further test cases will mainly care about 'qcow2' and 'raw'.
The top level disk image would generate the following '-drive' cmdline:
-drive file=/var/lib/libvirt/images/a,format=qed,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Similarly to the 'raw' case add tests for bochs, cloop, dmg, ploop, vdi
vhd, and vpc. Covering all supported non-backing formats.
Note that the JSON name for 'ploop' maps to 'parallels' and 'vhd' maps
to 'vhdx'.
Files added here would result in the followint configs:
file-bochs-noopts.xml:
-drive file=/path/to/i.img,format=bochs,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-cloop-noopts.xml:
-drive file=/path/to/i.img,format=cloop,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-dmg-noopts.xml:
-drive file=/path/to/i.img,format=dmg,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-ploop-noopts.xml:
-drive file=/path/to/i.img,format=ploop,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-vdi-noopts.xml:
-drive file=/path/to/i.img,format=vdi,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-vhd-noopts.xml:
-drive file=/path/to/i.img,format=vhd,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-vpc-noopts.xml:
-drive file=/path/to/i.img,format=vpc,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Test the JSON props generator with a very simple 'raw' image with no
other options. The node-names for the image are 31 bytes long so that we
validate our node name detector.
The top level disk image would generate the following '-drive' cmdline:
-drive file=/var/lib/libvirt/images/i.img,format=raw,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a test infrastructure that will allow testing the JSON object
generator used for generating data to use with blockdev-add.
The resulting disk including the backing chain is validated to conform
to the QAPI schema and the expected output files.
The first test cases make sure that libvirt will not allow nodenames
exceeding 31 chars.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Remove gnulib from _LDADD and move LDADDS to replace it. Also reformat
the _SOURCES so that they can be easily extended.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
New tests will add new data structures so rename the 'data' structure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The gluster protocol in qemu uses two styles, one of which is legacy and
not covered by the QAPI schema.
To allow using of the new style in the blockdev-add code, add a
parameter for qemuBlockStorageSourceGetBackendProps which will switch
between the two modes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Save and restore node names if we know them or when we will be
generating them in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The -no-kvm-pit-reinjection option has been deprecated since
its introduction in QEMU 1.3. See commit <1569fa1>.
Drop the capability since all the QEMUs we support allow tuning
the kvm-pit properties via -global.
Also add the QEMU_CAPS_KVM_PIT_TICK_POLICY to the clock-catchup
tests, since expecting it to succeed with QEMU that does not
have kvm-pit makes no sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We have been checking whether qemu-img supports the -o compat
option by scraping the -help output.
Since we require QEMU 1.5.0 now and this option was introduced in 1.1,
assume we support it and ditch the help parsing code along with the
extra qemu-img invocation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We have two leftover "capabilites" for qemu-img:
QEMU_IMG_BACKING_FORMAT_OPTIONS
QEMU_IMG_BACKING_FORMAT_OPTIONS_COMPAT
The former says we are able to specify the backing format via -o
(which has been the case for a long time now) and the second one
says we can use -o compat to specify the qcow2 version.
Since we require QEMU 1.5.0, we can always assume -o compat,
which was introduced in QEMU 1.1.
Drop the test cases using FMT_OPTIONS which have a FMT_COMPAT
counterpart to prepare for deprecating FMT_OPTIONS (and these flags)
completely.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
<features><vmcoreinfo/> is a bare boolean XML property. We don't really
use this format anymore and instead prefer tristate <X state=on|off/>
since it's required for modeling on/off/default. If for example future
qemu started enabling vmcoreinfo by default we wouldn't have any way
for the user to turn this off.
Convert it to tristate. For writing XML this is semanticly the same,
<vmcoreinfo/> is processed as <vmcoreinfo state='on'/>.
For apps reading guest XML this is technically an API change,
as they might misinterpret <vmcoreinfo state='off'/>, however this
has only been present in libvirt since 3.10.0 and I don't think any
apps are dependent on this yet
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Now that mocking NUMA information works on FreeBSD, there are
no longer any test cases that need to be restricted to Linux
only.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While the current amount of mocking works just fine on most of
our target platforms, it somehow causes issues when using Clang
on FreeBSD.
Work around the issue by mocking a couple more functions. It's
not pretty, but it makes qemuxml2argvtest pass on FreeBSD at
long last.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are only a couple remaining issues preventing it from
working on FreeBSD. Let's fix them.
With the mocking in place, qemumemlocktest and qemuxml2xmltest
can finally succeed on FreeBSD.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Clang complains about it:
error: second argument to 'va_arg' is of promotable type
'mode_t' (aka 'unsigned short'); this va_arg has undefined
behavior because arguments will be promoted to 'int'
[-Werror,-Wvarargs]
mode = va_arg(ap, mode_t);
^~~~~~
Work around the issue by passing int to va_arg() and casting
its return value to mode_t afterwards.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We're using virFileCanonicalizePath() everywhere now, so
mocking this function has become entirely pointless.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The latter is impossible to mock on platforms that use the
gnulib implementation, such as FreeBSD, while the former
doesn't suffer from this limitation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All the code now just uses the virHashTablePtr type directly.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This removes the virNWFilterHashTableFree, virNWFilterHashTablePut
and virNWFilterHashTableRemove methods, in favour of just calling
the virHash APIs directly.
The virNWFilterHashTablePut method was unreasonably complex because
the virHashUpdateEntry already knows how to create the entry if it
does not currently exist.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNWFilterHashTable struct only contains a single virHashTable
member since
commit 293d4fe2f1
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Mar 24 16:35:23 2014 +0000
Remove pointless storage of var names in virNWFilterHashTable
Thus, this struct wrapper adds no real value over just using the
virHashTable directly, but brings the complexity of needing to derefence
the hashtable to call virHash* APIs, and adds extra memory allocation
step.
To minimize code churn this just turns virNWFilterHashTable into a
typedef aliases virHashTable.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
