Next patch will validate QEMU_CAPS_NUMA_DIST in a new qemu_domain.c
function. The code to verify if a NUMA node distance is being
set will still be needed in qemuBuildNumaArgStr() though.
To avoid code repetition, let's put this logic in a helper to be
used in qemuBuildNumaArgStr() and in the new function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Validation of MACHINE_KERNEL_IRQCHIP and MACHINE_KERNEL_IRQCHIP_SPLIT
QEMU caps are now being done in qemuDomainDefValidateFeatures().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virQEMUCapsSupportsVmport() is now being called inside
qemuDomainDefValidateFeatures() for VIR_DOMAIN_FEATURE_VMPORT
feature.
qemuxml2xmltest.c was changed to account for this caps being
now validated at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a new function called qemuDomainDefValidatePSeriesFeature()
that will center all the PSeries validation done in qemu_command.c.
qemuDomainDefValidatePSeriesFeature() is then called during domain
define time, in qemuDomainDefValidateFeatures().
qemuxml2argvtest.c is also changed to include all the caps that now
are being validated in define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Qemu commit e900135dcfb67 ("i386: Add CPUID bit for CLZERO and XSAVEERPTR")
adds support for CLZERO CPUID bit.
This commit extends support for this CPUID bit into libvirt.
Signed-off-by: Ani Sinha <ani.sinha@nutanix.com>
Message-Id: <1575371352-99055-1-git-send-email-ani.sinha@nutanix.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There is plenty of distributions that haven't switched to
systemd nor they force their users to (Gentoo, Alpine Linux to
name a few). With the daemon split merged their only option is to
still use the monolithic daemon which will go away eventually.
Provide init scripts for these distros too.
For now, I'm not introducing config files which would correspond
to the init files except for libvirtd and virtproxyd init scripts
where it might be desirable to tweak the command line of
corresponding daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To free the structs and save the error, it is not necessary to hold @priv->lock,
therefore move these parts after the mutex unlock.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
This patch introduces virNetServerGetProgramLocked. It's a function to
determine which program has to be used for a given @msg. This function
will be reused in the next patch.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As a result, you can later determine during the callback which program
was used. This makes it easier to refactor the code in the future and
is less prone to error.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use the return value of virObjectRef directly. This way, it's easier
for another reader to identify the reason why the additional reference
is required.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Following domain configuration changes create two memory bandwidth
monitors: one is monitoring the bandwidth consumed by vCPU 0,
another is for vCPU 5.
```
<cputune>
<memorytune vcpus='0-4'>
<node id='0' bandwidth='20'/>
<node id='1' bandwidth='30'/>
+ <monitor vcpus='0'/>
</memorytune>
+ <memorytune vcpus='5'>
+ <monitor vcpus='5'/>
+ </memorytune>
</cputune>
```
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
We learned that the hardware features of CAT, CMT, MBA and MBM
are orthogonal ones, if CAT or MBA is not supported in system,
but CMT or MBM are supported, then the cache monitor or
memoryBW monitor features may not be correctly displayed in
host capabilities through command 'virsh capabilites'.
Showing the cache/memoryBW monitor capabilities even there is
no support of cache allocation or memoryBW allocation features.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
As of commit 2a00ef6e71 which
was released in v5.2.0, we require YAJL to build the QEMU driver.
Remove the checks from code that requires the QEMU driver
or checks that also check for WITH_QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add Hygon Dhyana CPU model to the processor model.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yingle Hou <houyingle@hygon.cn>
The x86ModelParseSignatures function makes an assumption that CPU signature
model equals 0 as an invalid case. While in Hygon processor definition, A1
version (model 0, stepping 1) is mass production version, to support Hygon
Dhyana A1 version, we have removed CPU signature model zero checking condition.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yingle Hou <houyingle@hygon.cn>
CVE-2019-11135
When TSX_CTRL bit of IA32_ARCH_CAPABILITIES MSR is set to 1, the CPU
supports IA32_TSX_CTRL MSR which can be used to disable and/or mask TSX.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
CVE-2019-11135
CPUs with TAA_NO bit of IA32_ARCH_CAPABILITIES MSR set to 1 are not
vulnerable to TSX Asynchronous Abort and passing this bit to a guest
may avoid unnecessary mitigations.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow backups work across external snapshots we need to improve the
algorithm which calculates which bitmaps to merge.
The algorithm must look for appropriately named bitmaps in the image and
possibly descend into a backing image if the current image does not have
the bitmap.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This function looks up a named bitmap for a virStorageSource in the data
returned from query-named-block-nodes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The function will require the bitmap topology for the full
implementation. To facilitate testing, add the propagation of the
necessary data beforehand so that the test code can stay unchanged
during the changes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Separate the for now incomplete code that collects the bitmaps to be
merged for an incremental backup into a separate function. This will
allow adding testing prior to the improvement of the algorithm to
include snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The object itself has no extra value and it would make testing the code
harder. Refactor it to remove just the definition pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Re-create any active persistent bitmap in the snapshot overlay image so
that tracking for a checkpoint is persisted. While this basically
duplicates data in the allocation map it's currently the only possible
way as qemu can't mirror the allocation map into a dirty bitmap if we'd
ever want to do a backup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuDomainSnapshotDiskPrepareOne is already called for each disk which
is member of the snapshot so we don't need to iterate through the
snapshot list again to generate members of the 'transaction' command for
each snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For testing purposes it will be beneficial to be able to parse the data
from JSON directly rather than trying to simulate the monitor. Extract
the worker bits and export them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We will need to inspect the presence and attributes for dirty bitmaps.
Extract them when processing reply of query-named-block-nodes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The use of the parseOpaque parameter was mistakenly removed in
commit 4a4132b462
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Dec 3 10:49:49 2019 +0000
conf: don't use passed in caps in post parse method
causing the method to re-fetch qemuCaps that were already just
fetched and put into parseOpaque.
This is inefficient when parsing incoming XML, but for live
XML this is more serious as it means we use the capabilities
for the current QEMU binary on disk, rather than the running
QEMU.
That commit, however, did have a useful side effect of fixing
a crasher bug in the qemu post parse callback introduced by
commit 5e939cea89
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu Sep 26 18:42:02 2019 +0200
qemu: Store default CPU in domain XML
The qemuDomainDefSetDefaultCPU() method in that patch did not
allow for the possibility that qemuCaps would be NULL and thus
resulted in a SEGV.
This shows a risk in letting each check in the post parse
callback look for qemuCaps == NULL. The safer option is to
check once upfront and immediately stop (postpone) further
validation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Don't check os type / virt type / arch in the post-parse callback
because we can't assume qemuCaps is non-NULL at this point. It
also conceptually belongs to the validation callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This function will be removed in a future commit because it allows the
caller to acquire both monitor and agent jobs at the same time. Holding
both job types creates a vulnerability to denial of service from a
malicious guest agent.
qemuDomainSetVcpusFlags() always passes NONE for either the monitor job
or the agent job (and thus is not vulnerable to the DoS), so we can
simply replace this function with the functions for acquiring the
appropriate type of job.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS.
Split the function so that the portion issuing the agent command only
holds an agent job and the portion issuing the monitor command holds
only a monitor job.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding a
monitor job while we're querying the agent, we open ourselves up to a
DoS.
So split the function up a bit to only hold the monitor job while
querying qemu for whether the domain supports suspend. Then acquire only
an agent job while issuing the agent suspend command.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS.
Split the function so that we only hold the appropriate type of job
while rebooting.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS. So split the function into separate parts: one that does the agent
shutdown and one that does the monitor shutdown. Each part holds only a
job of the appropriate type.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the uses passing a single parameter as the length.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the usage where sanity of the length argument is verified
by other conditions not matching the previous patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
My hesitation to remove VIR_STRDUP without VIR_STRNDUP resulted
in these being able to sneak in.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 7be5fe66cd.
This commit broke resctrl, because it missed the fact that the
virResctrlInfoGetCache() has side-effects causing it to actually
change the virResctrlInfo parameter, not merely get data from
it.
This code will need some refactoring before we can try separating
it from virCapabilities again.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This commit aims to fix
https://bugzilla.redhat.com/show_bug.cgi?id=1610207
The cause was apparently incorrect handling of jobs in snapshot
revert code which allowed a thread executing snapshot delete to
begin job while snapshot revert was still running on another
thread. The snapshot delete thread then waited on a condition
variable in qemuMonitorSend() while the revert thread finished,
changing (and effectively corrupting) the qemuMonitor structure
under the delete thread which led to its crash.
The incorrect handling of jobs in revert code was due to the fact
that although qemuDomainRevertToSnapshot() correctly begins a job
at the start, the job was implicitly ended when qemuProcessStop()
was called because the job lives in the QEMU driver's private
data (qemuDomainObjPrivate) that was purged during
qemuProcessStop().
This fix prevents qemuProcessStop() from clearing jobs as the
idea of qemuProcessStop() clearing jobs seems wrong in the first
place. It was (inadvertently) introduced in commit
888aa4b6b9, which is effectively reverted by
the second hunk of this commit. To preserve the desired effects
of the faulty commit, the first hunk is included as suggested by
Michal.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When QEMU uid/gid is set to non-root this is pointless as if we just
used a regular setuid/setgid call, the process will have all its
capabilities cleared anyway by the kernel.
When QEMU uid/gid is set to root, this is almost (always?) never
what people actually want. People make QEMU run as root in order
to access some privileged resource that libvirt doesn't support
yet and this often requires capabilities. As a result they have
to go find the qemu.conf param to turn this off. This is not
viable for libguestfs - they want to control everything via the
XML security label to request running as root regardless of the
qemu.conf settings for user/group.
Clearing capabilities was implemented originally because there
was a proposal in Fedora to change permissions such that root,
with no capabilities would not be able to compromise the system.
ie a locked down root account. This never went anywhere though,
and as a result clearing capabilities when running as root does
not really get us any security benefit AFAICT. The root user
can easily do something like create a cronjob, which will then
faithfully be run with full capabilities, trivially bypassing
the restriction we place.
IOW, our clearing of capabilities is both useless from a security
POV, and breaks valid use cases when people need to run as root.
This removes the clear_emulator_capabilities configuration
option from qemu.conf, and always runs QEMU with capabilities
when root. The behaviour when non-root is unchanged.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The keycodemap tool is told to generate docs in rst format now
instead of pod.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pull in changes which support use of RST for docs output format
instead of POD.
The generator tool has changed its command line arg handling
so all args must be after the command name. The docs title and
subtitle must be specified separately too.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With all plumbing in place, we can now enable the new functionality.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since blockcommit is asynchronous, libvirtd can be restarted while the
operation runs. To ensure the information necessary to finish up the job
is not lost, serialisation to and deserialisation from the status XML is
added.
To unittest this, the new element was only added to the active commit test,
the non-active commit test doesn't have the new element so as to test its
absence.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When blockcommit finishes successfully, one of the
qemuBlockJobProcessEventCompletedCommit() and
qemuBlockJobProcessEventCompletedActiveCommit() event handlers is called.
This is where the delete flag (stored in qemuBlockJobCommitData since the
previous commit) can actually be used to delete the committed snapshot
images if requested.
We use virFileRemove() instead of a simple unlink() to cover the case where
the image to be removed is on an NFS volume.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Propagate the delete flag from qemuDomainBlockCommit() (which was just
ignoring it until now) to qemuBlockJobDiskNewCommit() where it can be
stored in the qemuBlockJobCommitData structure which holds information
necessary to finish the job asynchronously.
In the actual qemuBlockJobDiskNewCommit() in this commit, we temporarily
pass a literal 'false' to preserve the current behaviour until the whole
implementation of the feature is in place.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Teach virt-aa-helper how to label a qcow2 data_file, tracked internally
as externalDataStore. It should be treated the same as its sibling
disk image
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Adjust virLXCDriverGetCapabilities to fill in driver->caps if it is
empty, regardless of the passed 'refresh' value. This matches the
pattern used in virQEMUDriverGetCapabilities
This fixes LXC XML startup parsing for me
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Clang complains about condition being always true:
src/util/virkeyfile.c:113:23: error: result of comparison of constant 128 with expression of type 'const char' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
while (!IS_EOF && IS_ASCII(CUR) && CUR != ']')
^~~~~~~~~~~~~
src/util/virkeyfile.c:80:26: note: expanded from macro 'IS_ASCII'
~~~ ^ ~~~
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The .pc files in src/ are intended for use with the ./run script,
to ease building bindings against an uninstalled libvirt build.
The pointer to the API XML files is incorrect though, it needs to
point into the build tree.
This fixes use of the run script for building libvirt-python, ex:
/path/to/libvirt.git/run ./setup.py build
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
GLib doesn't provide alternative to c_isascii and this is the only usage
of that macro so define a replacement ourselves.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The same way how we have IS_EOL in two files where we actually need it
defince IS_BLANK so we can drop usage of c_isblank.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This flag will allow figuring out whether the hypervisor supports the
incremental backup and checkpoint features.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the individual sub-blockjobs of a backup libvirt job finish we
must detect it and notify the parent job, so that it can be properly
terminated.
Since we update job information to determine success of a blockjob we
can directly report back also statistics of the blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the helper which cancels all blockjobs to perform the backup job
cancellation in qemuDomainAbortJob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use the output of 'query-jobs' to figure out some useful
information about a backup job. That is progress in case of a push job
and scratch file use in case of a pull job.
Add a worker which will total up the data and call it from
qemuDomainGetJobStatsInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The stats reported for a blockjob which is member of a domain pull
backup refer to the utilization of the scratch file rather than the
progress of the backup as the progress of the backup depends on the
client. Note this quirk in the docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need a place to store stats of completed sub-jobs so that we can
later report accurate stats.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backup blockjob needs to be able to notify the parent backup job as
well as track all data to be able to clean up the bitmap and blockdev
used for the backup.
Add the data structure, job allocation function and status XML formatter
and parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store the data of a backup job along with the index counter for new
backup jobs in the status XML. Currently we will support only one
backup job and thus there's no necessity to add arrays of jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the transaction actions generator for blockdev-backup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backup job may consist of many backup sub-blockjobs. Add the new
blockjob type and add all type converter strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will want to use the async job infrastructure along with all the APIs
and event for the backup job so add the backup job as a new async job
type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce QEMU_DOMAIN_JOB_STATS_TYPE_BACKUP and the convertors and other
plumbing to be able to report statistics for the backup job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept XML describing a generic block job, and output it again as
needed. This may still need a few tweaks to match the documented XML
and RNG schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This one is fairly straightforward - the generator already does what
we need.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a few new public APIs related to incremental backups. This
builds on the previous notion of a checkpoint (without an existing
checkpoint, the new API is a full backup, differing from
virDomainBlockCopy in the point of time chosen and in operation on
multiple disks at once); and also allows creation of a new checkpoint
at the same time as starting the backup (after all, an incremental
backup is only useful if it covers the state since the previous
backup).
A backup job also affects filtering a listing of domains, as well as
adding event reporting for signaling when a push model backup
completes (where the hypervisor creates the backup); note that the
pull model does not have an event (starting the backup lets a third
party access the data, and only the third party knows when it is
finished).
The full list of new APIs:
virDomainBackupBegin;
virDomainBackupGetXMLDesc;
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
$ cat f | grep -e arch -e emulator
<type arch='mipsel'>hvm</type>
$ sudo virsh define f
error: Failed to define domain from f
error: An error occurred, but the cause is unknown
After:
$ sudo virsh define f
error: Failed to define domain from f
error: unsupported configuration: No emulator found for arch 'mipsel'
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The virDomainVideoDefNew requires the xml options to be
provided since
commit 3dbf3941ad
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Mon Sep 23 14:44:35 2019 +0400
conf: add privateData to virDomainVideoDef
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
'cfg' is never initialized here, which causes a crash
later in qemuCheckpointCreateFinalize
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For any backing file we set 'read-only' to true, but didn't do this when
modifying the recorded backing store when creating external snapshots.
This meant that qemu would attempt to open the backing-file read-write.
This would fail for example when selinux is used as qemu doesn't have
write permission for the backing file.
https://bugzilla.redhat.com/show_bug.cgi?id=1781079
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nearly all internal APIs use the QEMU capabilities or other
QEMU driver data directly, there's no compelling benefit to create
virCapsPtr at driver startup.
Skipping this means we don't probe capabilities for all 30 system
emulator targets at startup, only those emulators which are referenced
by an XML doc. This massively improves libvirtd startup time when the
capabilities cache is not populated. It even improves startup time
when the cache is up to date, as we don't bother to load files from
the cache until we need them.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We always refresh the capabilities object when using virResctrlInfo
during process startup. This is undesirable overhead, because we can
just directly create a virResctrlInfo instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
host CPU information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Annoyingly there was no existing constructor, and identifying all the
places which do a VIR_ALLOC(cpu) is a bit error prone. Hopefully this
has found & converted them all.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
NUMA information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NUMA cells are stored directly in the virCapsHostPtr
struct. This moves them into their own struct allowing
them to be stored independantly of the rest of the host
capabilities. The change is used as an excuse to switch
the representation to use a GPtrArray too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the domain XML APIs don't use virCapsPtr we can stop passing it
around many QEMU driver methods.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No impl of this callback requires the virCapsPtr anymore.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only user of this callback did not require the virCapsPtr parameter.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU impl of the callback can directly use the QEMU capabilities
cache to resolve the emulator binary name, allowing virCapsPtr to be
dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virCapsPtr param is not used by any of the virt drivers providing
this callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr to get the default security model,
pass this in via the parser config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the disk and chardev seclabels are validated immediately at
the time their data is parsed. This forces the parser to fill in the
top level secmodel at time of parsing which is an undesirable thing.
This validation conceptually should be done in the post-parse phase
instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr information, pass the driver specific
netprefix in the domain parser struct. This eliminates one more use of
virCapsPtr from the XML parsing/formatting code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To enable the virCapsPtr parameter to the post parse method to be
eliminated, the drivers must fetch the virCapsPtr from their own
driver via the opaque parameter, or use an alternative approach
to validate the parsed data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The XML parser currently calls virCapabilitiesDomainDataLookup during
parsing to find the domain capabilities matching the triple
(virt type, os type, arch)
This is, however, bogus with the QEMU driver as it assumes that there
is an emulator known to the default driver capabilities that matches
this triple. It is entirely possible for the driver to be parsing an
XML file with a custom emulator path specified pointing to a binary
that doesn't exist in the default driver capabilities. This will,
for example be the case on a RHEL host which only installs the host
native emulator to /usr/bin. The user can have built a custom QEMU
for non-native arches into $HOME and wish to use that.
Aside from validation, this call is also used to fill in a machine type
for the guest if not otherwise specified. Again, this data may be
incorrect for the QEMU driver because it is not taking account of
the emulator binary that is referenced.
To start fixing this, move the validation to the post-parse callbacks
where more intelligent driver specific logic can be applied.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When parsing the guest XML we must fill in the default guest arch if it
is not already present because later parts of the parsing process need
this information.
If no arch is specified we lookup the first guest in the capabilities
data matching the os type and virt type. In most cases this will result
in picking the host architecture but there are some exceptions...
- The test driver is hardcoded to always use i686 arch
- The VMWare/ESX drivers will always place i686 guests ahead
of x86_64 guests in capabilities, so effectively they always
use i686
- The QEMU driver can potentially return any arch at all
depending on what combination of QEMU binaries are installed.
The domain XML hardware configurations are inherently architecture
specific in many places. As a result whomever/whatever created the
domain XML will have had a particular architecture in mind when
specifying the config. In pretty much any sensible case this arch
will have been the native host architecture. i686 on x86_64 is
the only sensible divergance because both these archs are
compatible from a domaain XML config POV.
IOW, although the QEMU driver can pick an almost arbitrary arch as its
default, in the real world no application or user is likely to be
relying on this default arch being anything other than native.
With all this in mind, it is reasonable to change the XML parser to
allow the default architecture to be passed via the domain XML options
struct. If no info is explicitly given then it is safe & sane to pick
the host native architecture as the default for the guest.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.
Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.
Finally enforce checking of the return type and mark all parameters
as non-NULL.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virQEMUCapsPtr objects are just empty. Future patches are
going to expect them to contain real data. Start off by populating the
machine types and arch information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.
In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The functions for converting migration typed parameters to QEMU
migration parameters and back were only implemented for integer types.
This patch adds support for string parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With blockdev we need to refer to the nodename of the disk source image
as the source argument for the blockdev-mirror operation while still
keeping the old job name. With blockdev we must also persist the job in
qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Separate out allocation of the virStorageSource corresponding to the
target NBD export of the migration.
As part of the splitout we allocate the export name explicitly as that
one must not change regardless whether blockdev is used or not to
provide compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The non-shared-storage migration tracks the storage source used
explicitly in the migration data so we must allow for processing of the
block job which has NULL mirror as the mirror will not be populated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that the cleanup section does not exist remove the label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuMigrationSrcNBDCopyCancelOne uses the block job data structure but
generated it's own job name rather than taking it from the block job
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With -blockdev we must use the nodename as the export but we must keep
the name of the export as it was before to ensure compatiblity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Declare the variable inside the loop with automatic clearing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuDomainBlockJobSetSpeed was not converted to get the job name from
the block job data. This means that after enabling blockdev the API call
would fail as we wouldn't use the appropriate name.
https://bugzilla.redhat.com/show_bug.cgi?id=1780497
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Where appropriate replace the open coded call with the qemu wrapper
which already reports the error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With this patch users can cold unplug some sound devices.
use "virsh detach-device vm sound.xml --config" command.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jidong Xia <xiajidong@cmss.chinamobile.com>
This is a follow-up to patch series posted in
https://www.redhat.com/archives/libvir-list/2019-November/msg01180.html
It implements a suggestion made by Cole in
https://www.redhat.com/archives/libvir-list/2019-November/msg01207.html
and discussed in follow-up messages as there were no objections to the
change.
The aim is to make the code more readable by replacing nested branching
with a flat structure.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In v5.8.0-rc1~122 we've removed the only use of @safename in
qemuMonitorTextLoadSnapshot(). What we are left with is an
declared but not initialized variable that is passed to
VIR_FREE().
Caught by libvirt-php test suite.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In v5.9.0-370-g8fa0374c5b I've tried to fix a bug by removing
some stale XATTRs in qemuProcessStop(). However, I forgot to
do nothing when the VIR_QEMU_PROCESS_STOP_NO_RELABEL flag was
specified.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Until now we only really aborted migration via qemuDomainAbortJob. This
will change with the upcoming addition of the backup job. Additionally
there were a bunch of if statements checking various aspects of the
current job.
To make it more obvious convert qemuDomainAbortJob to use a switch
statement and move the individual conditions to the appropriate job
type.
Every job type has now it's own case despite multiple job types just
plainly cancelling the job for clarity and future extension.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Following patch will refactor qemuDomainAbortJob to use a per-job-type
switch where we will need to abort a migration job in various branches.
Save some code duplication by introducing a helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the pdwtags processing script in Python.
The original inline shell and perl code was completely
unintelligible. The new python code is a manual conversion
that attempts todo basically the same thing.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduced in c8007fdc5d, it should use 'greater than max' instead of
'equal or greater than max' for the condition of checking invalid scsi
unit.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we static link to libvirt_util.la then we can't override functions in
this file by simply implementing them in the test code. Any tests should
dynamic link to the main libvirt.la and ensure symbols are exported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
