If the argument of 'xmlSaveUri' is non-NULL the function returns NULL on
OOM failure only. Thus we can directly abort rather than try to do the
impossible recovery.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Out of memory isn't the only reason the function can fail. Add a message
stating that copying of a XML node failed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Add a wrapper that will handle the out of memory condition by abort()
and also prevents callers from having to typecast the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
'xmlBufferCreate' returns NULL only on allocation failure. Add a wrapper
which will call 'abort()' in such case in a centralised spot. It doesn't
make much sense to continue execution from here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function is used in many places and fails only on allocation
failures. Since trying to recover from allocation failure of a small
buffer by reporting error doesn't make sense add a wrapper for
'nlmsg_alloc_simple' which will 'abort()' on failure and replace all
allocations of netlink message with the new helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
There's nothing that would set the 'err' field of virFirewallPtr to
ENOMEM so we can remove the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
VIR_APPEND_ELEMENT_COPY will abort the program on OOM so there's no need
to check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
VIR_EXPAND_N will abort so we can simplify the hash iterator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Switch to use g_autoptr for 'doc' and 'new' local variables.
Additionally report proper error when 'xmlAddChild' fails because OOM is
not the only error it can report.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
'virLogGetFilters' doesn't return failure and 'virLogGetOutputs' reports
it's own errors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function can't fail nowadays, remove the return value and adjust
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Get the buffer contents into a temporary variable with automatic
clearing so that the error branches don't have to reset the buffer.
Additionally handle the NULL string case before assignment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function is supposed to always consume the passed environment
variable string. Use a temp variable with autofree and g_steal_pointer
to prevent having to free it manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Since error checking was removed when switching to g_strdup, it doesn't
make much sense to have 'tmp' around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This function finds "swtmp", "swtpm_setup" and "swtpm_ioctl"
binaries in $PATH and stores resolved paths in global variables
so that they can be obtainer later. Anyway, the resolved path is
marked as g_autofree and to avoid its freeing later on in the
function the variable is set to NULL manually. Well, we have
g_steal_pointer() for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a guest with TPM of type='emulator' an external
process is started with it (swtpm) to emulate TPM. This external
process is passed path to a log file via --logfile. The path to
the log file is generated in qemuTPMEmulatorPrepareHost() which
works, until the daemon is restarted. The problem is that the
path is not stored in private data or anywhere inside live XML
and thus later, when qemuExtTPMStop() is called (when shutting
off the guest) the stored logpath is NULL and thus its seclabel
is not cleaned up (see virSecuritySELinuxRestoreTPMLabels()).
Fortunately, qemuExtDevicesStop() (which calls qemuExtTPMStop()
eventually) does call qemuExtDevicesInitPaths() where the log
path can be generated again.
Basically, tpm->data.emulator.storagepath is generated in
qemuExtTPMInitPaths() and its seclabels are restored properly,
and this commit move logfile onto the same level.
This means, that the log path doesn't have to be generated in
qemuExtDevicesStart() because it was already done in
qemuExtDevicesPrepareHost().
This change also renders @vmname argument of
qemuTPMEmulatorPrepareHost() unused and thus is removed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1769196
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Strictly not needed, but the rest of paths is generated in
separate functions. Helps with code readability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libvirt_recover_xattrs.sh script can be used to remove stale
XATTRs that were left behind by secdrivers (which should happen
only if there's an imbalance between set and restore calls).
Anyway, the script has '-n' switch which is supposed to perform
just a dry run, i.e. just to report which files have XATTRs set
without any attempt to remove them.
But, when rewriting the script a few months ago a typo was
introduced which made the script report no files even if there
were files with XATTRs.
Fixes: 5377177f80
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In files: src/lxc/lxc_native: in lxcAddNetworkRouteDefinition(),
src/conf/networkcommon_conf: in virNetDevIPRouteCreate() and
virNetDevIPRouteParseXML()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In files: src/conf/domain_conf: in virDomainNetIPInfoParseXML(),
src/lxc/lxc_native: in lxcAddNetworkRouteDefinition(),
src/vz/vz_sdk: in prlsdkGetRoutes(), src/conf/networkcommon_conf:
in virNetDevIPRouteCreate()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This was added to qemu in commit 5447089c2b3b084b51670af36fc86ee3979e04be.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This was added to qemu in commit 623972ceae091b31331ae4a1dc94fe5cbb891937.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This was added to qemu in commit 623972ceae091b31331ae4a1dc94fe5cbb891937.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Example:
../src/hyperv/hyperv_driver.c:3007:54: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘size_t’ {aka ‘unsigned int’} [-Werror=format=]
3007 | virReportError(VIR_ERR_INTERNAL_ERROR, _("Could not attach serial port %lu"), i);
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virHostdevReAttachPCIDevices() is called when we want to re-attach
a list of hostdevs back to the host, either on the shutdown path or
via a 'virsh detach-device' call. This function always count on the
existence of the device in the host to work, but this can lead to
problems. For example, a SR-IOV device can be removed via an admin
"echo 0 > /sys/bus/pci/devices/<addr>/sriov_numvfs", making the kernel
fire up and eventfd_signal() to the process, asking for the process to
release the device. The result might vary depending on the device driver
and OS/arch, but two possible outcomes are:
1) the hypervisor driver will detach the device from the VM, issuing a
delete event to Libvirt. This can be observed in QEMU;
2) the 'echo 0 > ...' will hang waiting for the device to be unplugged.
This means that the VM process failed/refused to release the hostdev back
to the host, and the hostdev will be detached during VM shutdown.
Today we don't behave well for both cases. We'll fail to remove the PCI device
reference from mgr->activePCIHostdevs and mgr->inactivePCIHostdevs because
we rely on the existence of the PCI device conf file in the sysfs. Attempting
to re-utilize the same device (assuming it is now present back in the host)
can result in an error like this:
$ ./run tools/virsh start vm1-sriov --console
error: Failed to start domain vm1-sriov
error: Requested operation is not valid: PCI device 0000:01:00.2 is in use by driver QEMU, domain vm1-sriov
For (1), a VM destroy/start cycle is needed to re-use the VF in the guest.
For (2), the effect is more nefarious, requiring a Libvirtd daemon restart
to use the VF again in any guest.
We can make it a bit better by checking, during virHostdevReAttachPCIDevices(),
if there is any missing PCI device that will be left behind in activePCIHostdevs
and inactivePCIHostdevs lists. Remove any missing device found from both lists,
unconditionally, matching the current state of the host. This change affects
the code path in (1) (processDeviceDeletedEvent into qemuDomainRemoveDevice, all
the way back to qemuHostdevReAttachPCIDevices) and also in (b) (qemuProcessStop
into qemuHostdevReAttachDomainDevices).
NB: Although this patch enables the possibility of 'outside Libvirt' SR-IOV
hotunplug of PCI devices, if the hypervisor and the PCI driver copes with it,
our goal is to mitigate what it is still considered a user oopsie. For all
supported purposes, the admin must remove the SR-IOV VFs from all running domains
before removing the VFs from the host.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/72
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This change will allow us to remove PCI devices from a list
without the need of a PCI Device object, which will be need
in the next patch.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We're going to need a way to remove a PCI Device from a list without having
a valid virPCIDevicePtr, because the device is missing from the host. This
means that virPCIDevicesListDel() must operate with a PCI Device address
instead.
Turns out that virPCIDevicesListDel() and its related functions only use
the virPCIDeviceAddressPtr of the virPCIDevicePtr, so this change is
simple to do and will not cause hassle in all other callers. Let's
start adapting virPCIDeviceListFindIndex() and crawl our way up to
virPCIDevicesListDel().
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is no need to bother with cgroup tearing down for absent
PCI devices, given that their entries in the sysfs are already
gone.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add a helper to quickly determine if a hostdev is a PCI device,
instead of doing a tedious 'if' check with hostdev mode and
subsys type.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use g_auto* pointers to avoid the need of a cleanup label. The
type of the pointer 'virDomainPtr dom' was changed to its alias
'virshDomainPtr' to allow the use of g_autoptr().
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If the underlying PCI device of a hostdev does not exist in the
host (e.g. a SR-IOV VF that was removed while the domain was
running), skip security label handling for it.
This will avoid errors that happens during qemuProcessStop() time,
where a VF that was being used by the domain is not present anymore.
The restore label functions of both DAC and SELinux drivers will
trigger errors in virPCIDeviceNew().
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Gitlab issue #72 [1] reports that removing SR-IOVs VFs before
removing the devices from the running domains can have strange
consequences. QEMU might be able to hotunplug the device inside the
guest, but Libvirt will not be aware of that, and then the guest is
now inconsistent with the domain definition.
There's also the possibility of the VFs removal not succeeding
while the domain is running but then, as soon as the domain
is shutdown, all the VFs are removed. Libvirt can't handle
the removal of the PCI devices while trying to reattach the
hostdevs, and the Libvirt daemon can be left in an inconsistent
state (see [2]).
This patch starts to address the issue related in Gitlab #72, most
notably the issue described in [2]. When shutting down a domain
with SR-IOV hostdevs that got missing, virHostdevReAttachPCIDevices()
is failing the whole process and failing to reattach all the
PCI devices, including the ones that aren't related to the VFs that
went missing. Let's make it more resilient with host changes by
changing virHostdevGetPCIHostDevice() to return an exclusive error
code '-2' for this case. virHostdevGetPCIHostDeviceList() can then
tell when virHostdevGetPCIHostDevice() failed to find the PCI
device of a hostdev and continue to make the list of PCI devices.
virHostdevReAttachPCIDevices() will now be able to proceed reattaching
all other valid PCI devices, at least. The 'ghost hostdevs' will be
handled later on.
[1] https://gitlab.com/libvirt/libvirt/-/issues/72
[2] https://gitlab.com/libvirt/libvirt/-/issues/72#note_459032148
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We're going to add logic to handle the case where a previously
existing PCI device does not longer exist in the host.
The logic was copied from virPCIDeviceNew(), which verifies if a
PCI device exists in the host, returning NULL and throwing an
error if it doesn't. The NULL is used for other errors as well
(product/vendor id read errors, dev id overflow), meaning that we
can't re-use virPCIDeviceNew() for the purpose of detecting
if the device exists.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Via coccinelle (not the handbag!)
spatches used:
@ rule1 @
identifier a, b;
symbol NULL;
@@
- b = a;
... when != a
- a = NULL;
+ b = g_steal_pointer(&a);
@@
- *b = a;
... when != a
- a = NULL;
+ *b = g_steal_pointer(&a);
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
