Rather than completely compiling out the tests mark them as skipped.
This will allow us to add a checker that all input files are accounted
for.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the rest of test cases which were tested only by qemuxml2xmltest.
All test cases added here have a '<interface type="network"' which needs
to be translated using the new fake network driver.
Note that this captures the status quo of the tests. No care was given
whether the tests make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add versions stripping vlans and bandwidth setup so that they can be
used in qemuxml2argvtest for interfaces which don't support the above.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the data from 'nat-network' network definition to enable the test
case also for xml2argvtest.
Since the network listen bit doesn't need any plug definition just use
an empty string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to be able to use '<interface type="network"' we need a fake
network driver in qemuxml2argvtest. Create one by simply allowing users
to reuse configs from tests/networkxml2xmlin and tests/virnetworkportxml2xmldata
which will be returned to corresponding functions.
The driver implements:
.networkLookupByName = fakeNetworkLookupByName,
- validate syntax of network name, check if config exists
.networkGetXMLDesc = fakeNetworkGetXMLDesc,
- return appropriate XML
.networkPortCreateXML = fakeNetworkPortCreateXML,
- validate that port XML exists
.networkPortGetXMLDesc = fakeNetworkPortGetXMLDesc,
- return appropriate port XML
With the above and the correspondign test data, all network XMLs can be
enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately the network backend commandline formatter attempts to also
setup the backend itself, which it really should not.
For now make sure qemuxml2argvtest can call virNetDevSetMTU.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate the SLIRP bits from 'qemuProcessNetworkPrepareDevices' and do
the setup of the internal data when setting up domain data.
This will allow tests to use the same code path to lookup data for a
network.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Everything this XML tests is already explicitly covered in other tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modify the test case so that it can be used also for qemuxml2argvtest
by removing invalid configuration (interface type='user' + queues),
clean up unneeded disks and rename it accordingly. Also test the
ioeventfd.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Test both linkstates in an explicit test case. Note that link state is
setup via monitor, thus not visible on the commandline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The tested configuration is not valid for a qemu VM. Move it to the
generic test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There were plenty of test cases invoked only from qemuxml2xmltest but
not from qemuxml2argvtest, either by accident or it was deemed unneeded.
Bulk-add all test cases which fit the above description which don't
require faking the network driver. Use same invocation as present in
qemuxml2xmltest.
Arguably in certain cases we could move the test case to
genericxml2xmltest, but this covers the cases when that would not be
appropriate.
Tests requiring the network driver will be bulk-added when the fake
network driver will be implemented.
This patch also allows the use of FLAG_SKIP_CONFIG_ACTIVE in
qemuxml2argvtest although the flag will be dormant for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prepare for test cases which would want to call that function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prevent duplicated invocation of tests by tracking use of output files.
Some cases need to be exempt from this for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'parallel-tcp-chardev', 'parallel-parport-chardev' are invoked twice
with exactly the same parameters, remove the duplicity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver explicitly rejects such configuration, thus this is just
a generic XML2XML test case. Move it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The case was removed in commit 8ff73d22c7
which modernized the cases without an explicit reason. Reinstate it.
Fixes: 8ff73d22c7
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test case was introduced by commit 68599168ea
but is only used in the qemunbdkittest. Fix it and make use of it also
in qemuxml2argvtest.
Fixes: 68599168ea
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The tests invocations were accidentaly removed in commit
54257ed51b
Fixes: 54257ed51b
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently when we build with nbdkit support, libvirt will always try to
use nbdkit to access remote disk sources when it is available. But
without an up-to-date selinux policy allowing this, it will fail.
because the required selinux policies are not yet widely available, we
have disabled nbdkit support on rpm builds for all distributions before
Fedora 40.
Unfortunately, this makes it more difficult to test nbdkit support.
After someone updates to the necessary selinux policies, they would also
need to rebuild libvirt to enable nbdkit support. By introducing a
configure option (nbdkit_config_default), we can build packages with
nbdkit support but have it disabled by default.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
udevGetStringSysfsAttr() return value is invariant, so change it
type and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
udevTranslatePCIIds() return value is invariant, so change it
type and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virProcessGetNamespaces() return value is invariant, so change it
type and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainNetUpdate() return value is invariant, so change it type
and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virLXCControllerAddConsole() return value is invariant, so change
it type and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virNetServerAddService() return value is invariant, so change it
type and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virCPUx86DataAddItem() return value is invariant, so change it
type and remove all dependent checks.
Functions changed to void:
virCPUx86DataAddItem()
x86DataAdd()
virCPUx86DataAdd()
x86DataAddSignature()
virCPUx86DataSetSignature()
libxlCapsAddCPUID()
cpuidSetLeaf4()
cpuidSetLeaf7()
cpuidSetLeafB()
cpuidSetLeafD()
cpuidSetLeafResID()
cpuidSetLeaf12()
cpuidSetLeaf14()
cpuidSetLeaf17()
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, libvirt creates a thread pool with only on thread to handle all
qemu monitor events for virtual machines, In the cases that if the thread
gets stuck while handling a monitor EOF event, such as unable to kill the
virtual machine process or release resources, the events of other virtual
machine will be also blocked, which will lead to the abnormal behavior of
other virtual machines.
For instance, when another virtual machine completes a shutdown operation
and the monitor EOF event has been queued but remains unprocessed, we
immediately destroy and start the virtual machine again, at a later time
when EOF event get processed, the processMonitorEOFEvent() will kill the
virtual machine that just started.
To address this issue, in the processMonitorEOFEvent(), we check whether
the current virtual machine's id is equal to the the one at the time
the event was generated. If they do not match, we immediately return.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Signed-off-by: dengpengcheng <dengpc12@chinatelecom.cn>
New Alpine and Fedora releases were added to libvirt-ci (3.19 and
39, respectively) and old ones were removed. Update the manifest
file and regenerate the rest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently, Fedora 37 and 38 is used. The former is now EOL since
there's new release. Switch 37 to 39 then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Prior to v9.3.0-rc1~30 we used to set default bus for <input/>
devices, during XML parsing. In the commit this code was moved to
a post parse callback. But somehow the line that sets the bus in
one specific case disappeared. Bring it back.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/577
Fixes: c4bc4d3b82
Signed-off-by: Jonathan Wright <jonathan@almalinux.org>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By adding a link to an explanation in the kbase.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
QEMU 8.2 was released, update the x86_64 data for a final time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
FreeBSD 12.0 is no longer supported since 14.0 is out. Change the
CI manifest and refresh the rest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Multiplication results in integer overflow.
Thus, replace it with ULLONG_MAX and change
def->opts.pciopts.pcihole64size type to ULL.
Update variable usage according to new type.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Egor Makrushin <emakrushin@astralinux.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As of commit b2d079c113 which converted this function to use g_strdup,
the error label is only reached when i = 0, rendering it useless.
Remove it.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/572
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When splitting out the apparmor modular daemon profiles from the
libvirtd profile, the net_admin and sys_admin capabilities were
dropped from the virtxend profile. It was not known at the time
that these capabilities were needed for PCI passthrough. Without
the capabilities, the following messages are emitted from the audit
subsystem
audit: type=1400 audit(1702939277.946:63): apparmor="DENIED" \
operation="capable" class="cap" profile="virtxend" pid=3611 \
comm="rpc-virtxend" capability=21 capname="sys_admin"
audit: type=1400 audit(1702940304.818:63): apparmor="DENIED" \
operation="capable" class="cap" profile="virtxend" pid=3731 \
comm="rpc-virtxend" capability=12 capname="net_admin"
It appears sys_admin is needed to simply read from the PCI dev's
sysfs config file. The net_admin capability is needed when setting
the MAC address of an SR-IOV virtual function.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recent refactor which changed the format check to use
qemuBlockStorageSourceIsRaw accidentaly inverted the condition.
Caught by the CI test suite.
Fixes: b600b69f82
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
If the user did not specify any uid mapping, map its own
user ID to ID 0 inside the container and the rest of the IDs
to the first found user's authorized range in /etc/sub[ug]id
https://issues.redhat.com/browse/RHEL-7386https://gitlab.com/libvirt/libvirt/-/issues/535
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the explicit setting of uid 0 when running virtiofsd.
It is not required for privileged mode, where virtiofsd will be run
as root anyway. And for unprivileged mode, virtiofsd no longer requires
to be run as root.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
