When starting a guest with TPM of type='emulator' an external
process is started with it (swtpm) to emulate TPM. This external
process is passed path to a log file via --logfile. The path to
the log file is generated in qemuTPMEmulatorPrepareHost() which
works, until the daemon is restarted. The problem is that the
path is not stored in private data or anywhere inside live XML
and thus later, when qemuExtTPMStop() is called (when shutting
off the guest) the stored logpath is NULL and thus its seclabel
is not cleaned up (see virSecuritySELinuxRestoreTPMLabels()).
Fortunately, qemuExtDevicesStop() (which calls qemuExtTPMStop()
eventually) does call qemuExtDevicesInitPaths() where the log
path can be generated again.
Basically, tpm->data.emulator.storagepath is generated in
qemuExtTPMInitPaths() and its seclabels are restored properly,
and this commit move logfile onto the same level.
This means, that the log path doesn't have to be generated in
qemuExtDevicesStart() because it was already done in
qemuExtDevicesPrepareHost().
This change also renders @vmname argument of
qemuTPMEmulatorPrepareHost() unused and thus is removed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1769196
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Strictly not needed, but the rest of paths is generated in
separate functions. Helps with code readability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to bother with cgroup tearing down for absent
PCI devices, given that their entries in the sysfs are already
gone.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Via coccinelle (not the handbag!)
spatches used:
@ rule1 @
identifier a, b;
symbol NULL;
@@
- b = a;
... when != a
- a = NULL;
+ b = g_steal_pointer(&a);
@@
- *b = a;
... when != a
- a = NULL;
+ *b = g_steal_pointer(&a);
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
If the VM isn't active calculating the job stats doesn't make sense.
Additionally this prevents a crash of libvirtd if qemu terminates while
libvirt wasn't running:
Thread 28 "init-backup-tes" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffb9310640 (LWP 3201116)]
qemuDomainJobInfoUpdateTime (jobInfo=0x0) at ../../../libvirt/src/qemu/qemu_domainjob.c:275
275 if (!jobInfo->started)
(gdb) bt
#0 qemuDomainJobInfoUpdateTime (jobInfo=0x0) at ../../../libvirt/src/qemu/qemu_domainjob.c:275
#1 0x00007fffcba1a12d in qemuBackupJobTerminate (vm=0x7fff9c1bc840, jobstatus=QEMU_DOMAIN_JOB_STATUS_CANCELED) at ../../../libvirt/src/qemu/qemu_backup.c:563
#2 0x00007fffcbaefcae in qemuProcessStop
(driver=0x7fff9c144ff0, vm=0x7fff9c1bc840, reason=VIR_DOMAIN_SHUTOFF_DAEMON, asyncJob=QEMU_ASYNC_JOB_NONE, flags=<optimized out>)
at ../../../libvirt/src/qemu/qemu_process.c:7812
#3 0x00007fffcbaf2a10 in qemuProcessReconnect (opaque=<optimized out>) at ../../../libvirt/src/qemu/qemu_process.c:8578
#4 0x00007ffff7c46bb5 in virThreadHelper (data=<optimized out>) at ../../../libvirt/src/util/virthread.c:233
#5 0x00007ffff6e453f9 in start_thread () at /lib64/libpthread.so.0
#6 0x00007ffff766fb53 in clone () at /lib64/libc.so.6
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will remove unnecessary actions if the VM crashed. The
cleanup needs to be performed always, thus needs to be moved earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The most important bit is that the caller is expected to pass
locked monitor.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Using the job owner API name directly works fine as long as it is a
static string or the owner's thread is still running. However, this is
not always the case. For example, when the owner API name is filled in a
job when we're reconnecting to existing domains after daemon restart,
the dynamically allocated owner name will disappear with the
reconnecting thread. Any follow up usage of the pointer will read random
memory.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit 010ed0856b and commit db64acfbda introduced the ability to use
the <teaming> element in a generic <hostdev> (previously it could only
be used with <interface type='hostdev'>). However, the patch omitted
one crucial detail - along with parsing the <teaming> element in
<hostdev>, and adding the necessary info to the qemu commandline, we
also need to modify qemuMigrationSrcIsAllowedHostdev() to allow
migration when the generic <hostdev> has a <teaming> element.
https://bugzilla.redhat.com/1927984
Fixes: 010ed0856b
Reported-by: Yalan Zhang <yalzhang@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuMonitorUnregister will be called in multiple threads (e.g. threads
in rpc worker pool and the vm event thread). In some cases, it isn't
protected by the monitor lock, which may lead to call g_source_unref
more than one time and a use-after-free problem eventually.
Add the missing lock in qemuProcessHandleMonitorEOF (which is the only
position missing lock of monitor I found).
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parent array takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parent object takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For incremental backup we need QEMU_CAPS_BLOCKDEV,
QEMU_CAPS_BLOCKDEV_REOPEN, QEMU_CAPS_MIGRATION_PARAM_BLOCK_BITMAP_MAPPING.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Preserve block dirty bitmaps after migration with
QEMU_MONITOR_MIGRATE_NON_SHARED_(DISK|INC).
This patch implements functions which offer the bitmaps to the
destination, check for eligibility on destination and then configure
source for the migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In case when the block migration job required temporary bitmaps for
merging the appropriate checkpoints we need to clean them up when
cancelling the job. On success we don't need to do that though as the
bitmaps are just temporary thus are not written to disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add status XML infrastructure for storing a list of block dirty bitmaps
which are temporarily used when migrating a VM with
VIR_MIGRATE_NON_SHARED_DISK for cleanup after a libvirtd restart during
migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
'qemuMigrationCookieBlockDirtyBitmapsMatchDisks' maps the bitmaps from
the migration cookie to actual disk objects definition pointers.
'qemuMigrationCookieBlockDirtyBitmapsToParams' converts the bitmap
definitions from the migration cookie into parameters for the
'block-bitmap-mapping' migration parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In cases where we are copying the storage we need to ensure that also
bitmaps are copied properly. This patch adds migration cookie XML
infrastructure which will allow the migration sides reach consensus on
which bitmaps to migrate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add the migration capability flag and the propagation of the
corresponding mapping configuration. The mapping will be produced from
the bitmaps on disk depending on both sides of the migration and the
necessity to perform merges.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There's no need in the cleanup steps to invoke a transaction to delete a
single bitmap.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The non-transaction wrapper is useful for code paths which want to
delete individual bitmaps or for cleanup after a failed job where we
want to attempt to delete every bitmap individually to prevent a failure
from cleaning up the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use the new format when pre-creating the image for the user. Users
wishing to use the legacy format can always provide their own images or
use shared storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Such images don't support stuff like dirty bitmaps. Note that the
synthetic test for detecting bitmaps is used as an example to prevent
adding additional test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The capability represents qemu's ability to setup mappings for migrating
block dirty bitmaps and is based on presence of the 'transform' property
of the 'block-bitmap-mapping' property of 'migrate-set-parameters' QMP
command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch partially reverts commit 5cde9dee where the qemuExtDevicesStop()
was moved to a location before the QEMU process is stopped. It may be
alright to tear down some devices before QEMU is stopped, but it doesn't work
for the external TPM (swtpm) which assumes that QEMU sends it a signal to stop
it before libvirt may try to clean it up. So this patch moves the
virFileDeleteTree() calls after the call to qemuExtDevicesStop() so that the
pid file of virtiofsd is not deleted before that call.
Afftected libvirt versions are 6.10 and 7.0.
Fixes: 5cde9dee8c
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A VM defined similar to:
...
<features><kvm><hint-dedicated state='on'/></kvm></features>
<cpu mode="host-model"/>
...
is currently invalid, as hint-dedicated is only allowed if cpu mode
is host-passthrough or maximum. This restriction is unnecessary, see
https://bugzilla.redhat.com/show_bug.cgi?id=1857671
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Stay true to the name of the function and clear the pointer
after freeing it.
This also silences a bogus Coverity report about a double
free in qemuMonitorGetCPUInfo where qemuMonitorCPUInfoClear
is called right after allocating a new qemuMonitorCPUInfo
to fill out the non-zero defaults.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The comment and the caller assume virQEMUSaveDataNew only steals
domXML on success, but it is copied even on failure.
Also remove the misleading g_steal_pointer call on a local variable.
Reported by coverity.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 76f4788932 made qemuNodeDeviceDetachFlags() unusable due to an
'if then else if' chain that will always results in a 'return -1',
regardless of 'driverName' input.
Found by Coverity.
Fixes: 76f4788932
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Just return when alias is null and Remove the 'ret' variable.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
libxlNodeDeviceDetachFlags() and qemuNodeDeviceDetachFlags() are mostly
equal, aside from how the virHostdevmanager pointer is retrieved and
the PCI stub driver used.
Now that the PCI stub driver verification is done early in both functions,
we can use the virDomainDriverNodeDeviceDetachFlags() helper to reduce
code duplication between them. 'driverName' is checked inside the helper
to set the appropriate stub driver.
The helper is named with the 'Flags' suffix, even when the helper itself
isn't receiving the flags from the callers, to be compliant with the
ACL function virNodeDeviceDetachFlagsEnsureACL() that is being called
inside it and was called from the original functions. Renaming the helper
would implicate in renaming REMOTE_PROC_NODE_DEVICE_DETACH_FLAGS, and all the
related structs inside remote_protocol.x, to be compliant with the ACL
rules.
This is not being checked at this moment, but we'll fix check-aclrules.py to
verify all the helpers that calls ACL functions in domain_driver.c shortly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The validation of 'driverName' does not depend on any other state and can be
done right on the start of the function. We can fail earlier while avoiding
a cleanup jump.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceReAttach() and qemuNodeDeviceReAttach() are mostly equal,
differing only how the virHostdevManager pointer is retrieved.
Put the common code into virDomainDriverNodeDeviceReAttach() to reduce
code duplication.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceReset() and qemuNodeDeviceReset() are mostly equal,
differing only how the virHostdevManager pointer is retrieved.
Put the common code into virDomainDriverNodeDeviceReset() to reduce
code duplication.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -vnc since the change to use
QemuOpts in 2.2.0, so we check based on the new capability flag.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was introduced in QEMU 2.2.0, and is visible by -vnc appearing in
the "query-command-line-options" data.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When virDomainGetFSInfo() is called over a QEMU/KVM domain it
results into calling of 'guest-get-fsinfo' guest agent command to
which it replies with info on guest (mounted) filesystems. When
filling return structure we also try to do basic lookup and
translate guest agent provided disk address into disk target (as
seen in domain XML). This can of course fail - guest can have
variety of disks not recorded in domain XML (iSCSI, scsi_debug,
NFS to name a few). If that's the case, a debug message is logged
and no disk target is added into the return structure.
However, due to the way our code is written the caller is led to
believe that the target was added into the structure. This may
lead to a situation where the array of disk targets (strings)
contains NULL. But our RPC structure says the array contains only
non-NULL strings. This results in somewhat 'cryptic' (at least to
users) error message:
error: Unable to get filesystem information
error: Unable to encode message payload
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1919783
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous commit, the freeing of @info_ret inside of
virDomainFSInfoFormat() looks like this:
for () {
if (info_ret)
virDomainFSInfoFree(info_ret[i]);
}
It is needless to compare @info_ret against NULL in each
iteration. We can switch the order and do the comparison first
followed by the loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When qemuDomainGetFSInfo() is called it calls
qemuDomainGetFSInfoAgent() which executes 'guest-get-fsinfo'
guest agent command, parses returned JSON and returns an array of
qemuAgentFSInfo structures (well, pointers to those structs).
Then it grabs a domain job and tries to do some matching of guest
returned info against domain definition. This matching is done in
virDomainFSInfoFormat() which also frees the array of
qemuAgentFSInfo structures allocated earlier.
But this is not just. If acquiring the domain job fails (or
domain activeness check executed right after that fails) then
virDomainFSInfoFormat() is not called, leaking the array of
structs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As the very first thing, this function checks whether the number
of items inside @agentinfo array is not negative. This is
redundant as the only caller - qemuDomainGetFSInfo() already
checked for that and would not even call this function if that
was the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -spice since at least 1.5.3,
so we don't need to check for it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -chardev since at least 1.5.3,
so we don't need to check for it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -2 value is misleading because if 'qemuAgentFSFreeze' fails it
doesn't necessarily mean that the command was sent to the agent.
Since callers don't care about the -2 value specifically, remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If we didn't freeze any filesystems we should not even attempt thawing
them. Additionally 'guest-fsfreeze-freeze' fails if the filesystems are
already frozen, where thawing them may break users data integrity if
they used VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE accidentally after an
explicit virDomainFSFreeze and the next snapshot without that flag would
be taken with already thawed filesystems.
This effectively reverts 7c736bab06 .
Libvirt nowadays checks whether the guest agent is connected and pings
it before issuing an command so it's very unlikely that we'd end up in a
situation where qemuSnapshotCreateActiveExternal froze filesystems and
didn't thaw them.
Additionally we now discourage the use of
VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE since users have better control if
they freeze the FS themselves.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use g_autofree for 'dom_xml' to free it on some of the (unlikely) code
paths jumping to cleanup prior to the deallocation which is done right
after it's not needed any more since it's a big string.
Noticed when running under valgrind:
==2204780== 8,192 bytes in 1 blocks are definitely lost in loss record 2,539 of 2,551
==2204780== at 0x483BCE8: realloc (vg_replace_malloc.c:834)
==2204780== by 0x4D890DF: g_realloc (in /usr/lib64/libglib-2.0.so.0.6600.4)
==2204780== by 0x4DA3AF0: g_string_append_vprintf (in /usr/lib64/libglib-2.0.so.0.6600.4)
==2204780== by 0x4917293: virBufferAsprintf (virbuffer.c:307)
==2204780== by 0x49B0B75: virDomainChrDefFormat (domain_conf.c:26109)
==2204780== by 0x49E25EF: virDomainDefFormatInternalSetRootName (domain_conf.c:28956)
==2204780== by 0x15F81D24: qemuDomainDefFormatBufInternal (qemu_domain.c:6204)
==2204780== by 0x15F8270D: qemuDomainDefFormatXMLInternal (qemu_domain.c:6229)
==2204780== by 0x15F8270D: qemuDomainDefFormatLive (qemu_domain.c:6279)
==2204780== by 0x15FD8100: qemuMigrationSrcBeginPhase (qemu_migration.c:2395)
==2204780== by 0x15FE0F0D: qemuMigrationSrcPerformPeer2Peer3 (qemu_migration.c:4640)
==2204780== by 0x15FE0F0D: qemuMigrationSrcPerformPeer2Peer (qemu_migration.c:5093)
==2204780== by 0x15FE0F0D: qemuMigrationSrcPerformJob (qemu_migration.c:5168)
==2204780== by 0x15FE280E: qemuMigrationSrcPerform (qemu_migration.c:5372)
==2204780== by 0x15F9BA3D: qemuDomainMigratePerform3Params (qemu_driver.c:11841)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In one of my previous commits I've made an attempt to restore the
noqueue qdisc on a TAP corresponding to domain's <interface/> if
QoS is cleared out. The commit consisted of two almost identical
hunks. In both the pointer is dereferenced. But in one of them,
the pointer to new bandwidth can't be NULL while in the other it
can leading to a crash.
Fixes: d53b092353
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1919619
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
