The lxc contoller eventually makes use of virRandomBits(), which was
segfaulting since virRandomInitialize() is never invoked.
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff554d560 in random_r () from /lib64/libc.so.6
(gdb) bt
0 0x00007ffff554d560 in random_r () from /lib64/libc.so.6
1 0x0000000000469eaa in virRandomBits (nbits=32) at util/virrandom.c:80
2 0x000000000045bf69 in virHashCreateFull (size=256,
dataFree=0x4aa2a2 <hashDataFree>, keyCode=0x45bd40 <virHashStrCode>,
keyEqual=0x45bdad <virHashStrEqual>, keyCopy=0x45bdfa <virHashStrCopy>,
keyFree=0x45be37 <virHashStrFree>) at util/virhash.c:134
3 0x000000000045c069 in virHashCreate (size=0, dataFree=0x4aa2a2 <hashDataFree>)
at util/virhash.c:164
4 0x00000000004aa562 in virNWFilterHashTableCreate (n=0)
at conf/nwfilter_params.c:686
5 0x00000000004aa95b in virNWFilterParseParamAttributes (cur=0x711d30)
at conf/nwfilter_params.c:793
6 0x0000000000481a7f in virDomainNetDefParseXML (caps=0x702c90, node=0x7116b0,
ctxt=0x7101b0, bootMap=0x0, flags=0) at conf/domain_conf.c:4589
7 0x000000000048cc36 in virDomainDefParseXML (caps=0x702c90, xml=0x710040,
root=0x7103b0, ctxt=0x7101b0, expectedVirtTypes=16, flags=0)
at conf/domain_conf.c:8658
8 0x000000000048f011 in virDomainDefParseNode (caps=0x702c90, xml=0x710040,
root=0x7103b0, expectedVirtTypes=16, flags=0) at conf/domain_conf.c:9360
9 0x000000000048ee30 in virDomainDefParse (xmlStr=0x0,
filename=0x702ae0 "/var/run/libvirt/lxc/x.xml", caps=0x702c90,
expectedVirtTypes=16, flags=0) at conf/domain_conf.c:9310
10 0x000000000048ef00 in virDomainDefParseFile (caps=0x702c90,
filename=0x702ae0 "/var/run/libvirt/lxc/x.xml", expectedVirtTypes=16, flags=0)
at conf/domain_conf.c:9332
11 0x0000000000425053 in main (argc=5, argv=0x7fffffffe2b8)
at lxc/lxc_controller.c:1773
The comment says:
/* Now create the final dir in the path with the uid/gid/mode
* requested in the config. If the dir already exists, just set
* the perms.
*/
However, virDirCreate is only invoked if the target path doesn't
exist yet (which is opposite with the comment), or the uid from
the config is not -1 (I don't understand why, think it's just
another mistake). And the result is the perms of the pool won't
be changed if one tries to build the pool with different perms
again.
Besides these logic error fix, if no uid and gid are specified in
the config, the practical used uid, gid are reflected.
The two new APIs are rather trivial; based on bits and pieces of
other existing APIs. But rather than blindly return 0 or 1 for
HasMetadata, I chose to first validate that the snapshot in
question in fact exists.
* src/esx/esx_driver.c (esxDomainSnapshotIsCurrent)
(esxDomainSnapshotHasMetadata): New functions.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotIsCurrent)
(vboxDomainSnapshotHasMetadata): Likewise.
Blindly returning success is misleading if the object no longer
exists; it is a bit better to check for existence up front before
returning information about that object. This pattern matches the
fact that most of our other APIs check for existence as a side
effect prior to getting at the real piece of information being
queried.
* src/esx/esx_driver.c (esxDomainIsUpdated, esxDomainIsPersistent):
Add existence checks.
* src/vbox/vbox_tmpl.c (vboxDomainIsPersistent)
(vboxDomainIsUpdated): Likewise.
This patch adds support for listing all domains into drivers that use
the common virDomainObj implementation: libxl, lxc, openvz, qemu, test,
uml, vmware.
For drivers that don't support managed save images the guests are
treated as if they had none, so filtering guests that do have such an
image on this driver succeeds and produces 0 results.
The two new functions are very similar to the existing functions;
just a matter of different arguments and a call to a different
helper function.
* src/qemu/qemu_driver.c (qemuDomainSnapshotListNames)
(qemuDomainSnapshotNum, qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Support new flags.
(qemuDomainListAllSnapshots): New functions.
Wraps the conversion from 'char *name' to virDomainSnapshotPtr in
a reusable manner.
* src/conf/virdomainlist.h (virDomainListSnapshots): New declaration.
* src/conf/virdomainlist.c (virDomainListSnapshots): Implement it.
* src/libvirt_private.syms (virdomainlist.h): Export it.
The generator doesn't handle lists of virDomainSnapshotPtr, so
this commit requires a bit more work than some RPC additions.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_LIST_ALL_SNAPSHOTS)
(REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_ALL_CHILDREN): New RPC calls,
with corresponding structs.
* daemon/remote.c (remoteDispatchDomainListAllSnapshots)
(remoteDispatchDomainSnapshotListAllChildren): New functions.
* src/remote/remote_driver.c (remoteDomainListAllSnapshots)
(remoteDomainSnapshotListAllChildren): Likewise.
* src/remote_protocol-structs: Regenerate.
This adds support for the new virDomainListAllSnapshots (a domain
function) and virDomainSnapshotListAllChildren (a snapshot function)
to the libvirt-python bindings. The implementation is done manually
as the generator does not support wrapping lists of C pointers into
python objects.
* python/libvirt-override.c (libvirt_virDomainListAllSnapshots)
(libvirt_virDomainSnapshotListAllChildren): New functions.
* python/libvirt-override-api.xml: Document them.
* python/libvirt-override-virDomain.py (listAllSnapshots): New
file.
* python/libvirt-override-virDomainSnapshot.py (listAllChildren):
Likewise.
* python/Makefile.am (CLASSES_EXTRA): Ship them.
There was an inherent race between virDomainSnapshotNum() and
virDomainSnapshotListNames(), where an additional snapshot could
be created in the meantime, or where a snapshot could be deleted
before converting the name back to a virDomainSnapshotPtr. It
was also an awkward name: the function operates on domains, not
domain snapshots. virDomainSnapshotListChildrenNames() suffered
from the same inherent race, although its naming was nicer.
This patch makes things nicer by grabbing a snapshot list
atomically, in the format most useful to the user.
* include/libvirt/libvirt.h.in (virDomainListAllSnapshots)
(virDomainSnapshotListAllChildren): New declarations.
* src/libvirt.c (virDomainSnapshotListNames)
(virDomainSnapshotListChildrenNames): Add cross-references.
(virDomainListAllSnapshots, virDomainSnapshotListAllChildren):
New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainListAllSnapshots)
(virDrvDomainSnapshotListAllChildren): New callbacks.
* python/generator.py (skip_function): Prepare for later
hand-written versions.
Previously, to get the name of all snapshots with children, it was
necessary to get the name of all snapshots and then remove the
name of leaf snapshots. This is racy, and somewhat inefficient
compared to planned API additions. We can emulate --no-metadata on
0.9.5-0.9.12, but for now, there is no emulation of --no-leaves.
* tools/virsh.c (cmdSnapshotList): Add new options --no-leaves and
--no-metadata.
(vshSnapshotList): Emulate where possible.
* tools/virsh.pod (snapshot-list): Document them.
It turns out that one-bit filtering makes it hard to select the inverse
set, so it is easier to provide filtering groups. For back-compat,
omitting all bits within a group means the group is not used for
filtering, and by definition of a group (each snapshot matches exactly
one bit within the group, and the set of bits in the group covers all
snapshots), selecting all bits also makes the group useless.
Unfortunately, virDomainSnapshotListChildren defined the bit
VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS as an expansion rather than a
filter, so we cannot make it part of a filter group, so that bit
(and its counterpart VIR_DOMAIN_SNAPSHOT_LIST_ROOTS for
virDomainSnapshotList) remains a single control bit.
* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add a
couple more flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotNumChildren): Document them.
(virDomainSnapshotListNames, virDomainSnapshotListChildrenNames):
Likewise, and add thread-safety caveats.
* src/conf/virdomainlist.h (VIR_DOMAIN_SNAPSHOT_FILTERS_*): New
convenience macros.
* src/conf/domain_conf.c (virDomainSnapshotObjListCopyNames)
(virDomainSnapshotObjListCount): Support the new flags.
Until now, it was possible to crash libvirtd when defining domain with
channel device with missing source element.
When creating new virDomainChrDef, target.port is set to -1, but
unfortunately it is an union with addresses that virDomainChrDefFree
tries to free in case the deviceType is channel. Having the port set
to -1 is intended, however the cleanest way to get around the problems
with the crash seems to be renumbering the VIR_DOMAIN_CHR_CHANNEL_
target types to cover new NONE type (with value 0) being the default
(no target type yet).
Macro virCheckNullArgGoto is supposed to check for NULL argument but
checks non-NULL instead.
Macro virCheckNonNullArgReturn reports error as if the argument should
be NULL when it shouldn't.
Append '(MAC Address)' after the help string of domiftune virsh
command as it takes the same type of argument as domif-{get,set}link
which have it specified.
when lxcContainerIdentifyCGroups failed, the memory it allocated
has been freed, so we should not free this memory again in
lxcContainerSetupPivortRoot and lxcContainerSetupExtraMounts.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Another case where we can do the same amount of work with fewer
lines of redundant code, which will make adding new filters easier.
* src/conf/domain_conf.c (virDomainSnapshotNameData): Adjust
struct.
(virDomainSnapshotObjListCount): Delete, now taken care of...
(virDomainSnapshotObjListCopyNames): ...here.
(virDomainSnapshotObjListGetNames): Adjust caller to handle
counting.
(virDomainSnapshotObjListNum): Simplify.
Now that domain listing is a thin wrapper around child listing,
it's easier to have a common entry point. This restores the
hashForEach optimization lost in the previous patch when there
are no snapshots being filtered out of the entire list.
* src/conf/domain_conf.h (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListNum): Add parameter.
(virDomainSnapshotObjListGetNamesFrom)
(virDomainSnapshotObjListNumFrom): Delete.
* src/libvirt_private.syms (domain_conf.h): Drop deleted functions.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames):
Merge, and (re)add an optimization.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags)
(qemuDomainSnapshotListNames, qemuDomainSnapshotNum)
(qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Update callers.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
* src/conf/virdomainlist.c (virDomainListPopulate): Likewise.
This idea was first suggested by Daniel Veillard here:
https://www.redhat.com/archives/libvir-list/2011-October/msg00353.html
Now that I am about to add more complexity to snapshot listing, it
makes sense to avoid code duplication and special casing for domain
listing (all snapshots) vs. snapshot listing (descendants); adding
a metaroot reduces the number of code lines by having the domain
listing turn into a descendant listing of the metaroot.
Note that this has one minor pessimization - if we are going to list
ALL snapshots without filtering, then virHashForeach is more efficient
than recursing through the child relationships; restoring that minor
optimization will occur in the next patch.
* src/conf/domain_conf.h (_virDomainSnapshotObj)
(_virDomainSnapshotObjList): Repurpose some fields.
(virDomainSnapshotDropParent): Drop unused parameter.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListCount): Simplify.
(virDomainSnapshotFindByName, virDomainSnapshotSetRelations)
(virDomainSnapshotDropParent): Match new field semantics.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotReparentChildren, qemuDomainSnapshotDelete):
Adjust clients.
This patch adds common code to list domains in fashion used by
virListAllDomains with all currently supported flags. The header file
also contains macros that group filters together that are used to
shorten filter conditions.
This patch stores existence of the image in the object. At start of the
daemon the state is checked and then updated in key moments in domain
lifecycle.
This patch wires up the RPC protocol handlers for
virConnectListAllDomains(). The RPC generator has no support for the way
how virConnectListAllDomains() returns the results so the handler code
had to be done manually.
The new api is handled by REMOTE_PROC_CONNECT_LIST_ALL_DOMAINS, with
number 273 and marked with high priority.
This patch adds export of the new API function
virConnectListAllDomains() to the libvirt-python bindings. The
virConnect object now has method "listAllDomains" that takes only the
flags parameter and returns a python list of virDomain object
corresponding to virDomainPtrs returned by the underlying api.
The implementation is done manually as the generator does not support
wrapping list of virDomainPtrs into virDomain objects.
This patch adds a new public api that lists domains. The new approach is
different from those used before. There are key points to this:
1) The list is acquired atomically and contains both active and inactive
domains (guests). This eliminates the need to call two different list
APIs, where the state might change in between the calls.
2) The returned list consists of virDomainPtrs instead of names or ID's
that have to be converted to virDomainPtrs anyways using separate calls
for each one of them. This is more convenient and saves hypervisor calls.
3) The returned list is auto-allocated. This saves a lot of hassle for
the users.
4) Built in support for filtering. The API call supports various
filtering flags that modify the output list according to user needs.
Available filter groups:
Domain status:
VIR_CONNECT_LIST_DOMAINS_ACTIVE, VIR_CONNECT_LIST_DOMAINS_INACTIVE
Domain persistence:
VIR_CONNECT_LIST_DOMAINS_PERSISTENT,
VIR_CONNECT_LIST_DOMAINS_TRANSIENT
Domain state:
VIR_CONNECT_LIST_DOMAINS_RUNNING, VIR_CONNECT_LIST_DOMAINS_PAUSED,
VIR_CONNECT_LIST_DOMAINS_SHUTOFF, VIR_CONNECT_LIST_DOMAINS_OTHER
Existence of managed save image:
VIR_CONNECT_LIST_DOMAINS_MANAGEDSAVE,
VIR_CONNECT_LIST_DOMAINS_NO_MANAGEDSAVE
Auto-start option:
VIR_CONNECT_LIST_DOMAINS_AUTOSTART,
VIR_CONNECT_LIST_DOMAINS_NO_AUTOSTART
Existence of snapshot:
VIR_CONNECT_LIST_DOMAINS_HAS_SNAPSHOT,
VIR_CONNECT_LIST_DOMAINS_NO_SNAPSHOT
5) The python binding returns a list of domain objects that is very neat
to work with.
The only problem with this approach is no support from code generators
so both RPC code and python bindings had to be written manually.
*include/libvirt/libvirt.h.in: - add API prototype
- clean up whitespace mistakes nearby
*python/generator.py: - inhibit generation of the bindings for the new
api
*src/driver.h: - add driver prototype
- clean up some whitespace mistakes nearby
*src/libvirt.c: - add public implementation
*src/libvirt_public.syms: - export the new symbol
when libvirt_lxc trigger oom error in lxcContainerGetSubtree
we should free the alloced memory for mounts.
so when lxcContainerGetSubtree failed,we should do some
memory cleanup in lxcContainerUnmountSubtree.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
we alloc the memory for format in lxcContainerMountDetectFilesystem
but without free it in lxcContainerMountFSBlockHelper.
this patch just call VIR_FREE to free it.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
as we are missing:
attach-disk: --type can accept 'lun' too, not just cdrom or floppy.
attach-disk: --target specify logical device name, not path
attach-interface: --target silently drops strings with vnet* prefix
With latest changes to qemu-ga success on some commands is not reported
anymore, e.g. guest-shutdown or guest-suspend-*. However, errors are
still being reported. Therefore, we need to find different source of
indication if operation was successful. Events.
Operating on a list of snapshot objects looks so much simpler.
In particular, since the helper function already trimmed out
irrelevant entries, we no longer have quite so many special cases
on finding the first snapshot to operate on. Also, vshTreePrint
no longer has a generic callback struct; both clients now pass
something different according to their own needs.
* tools/virsh.c (cmdSnapshotList): Use previous patches.
(vshTreeArrayLookup): Rename...
(vshNodeListLookup): ...now that it only has one client.
(cmdNodeListDevices): Adjust caller.
This patch is based on the fallback code out of cmdSnapshotList,
with tweaks to keep the snapshot objects around rather than just
their name, and to remove unwanted elements before returning.
It looks forward to a future patch when we add a way to list all
snapshot objects at once, and the next patch will simplify
cmdSnapshotList to take advantage of this factorization.
* tools/virsh.c (vshSnapshotList, vshSnapshotListFree): New functions.
Commit 6e769eba made it a runtime error if libvirt was compiled
without yajl support but targets a new enough qemu. But enough
users are hitting this on self-compiled libvirt that it is worth
erroring out at compilation time, rather than an obscure failure
when trying to use the built executable.
* configure.ac: If qemu is requested and -version works, require
yajl when qemu version is new enough.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Add
comment.
If we do ./autogen.sh && ./configure, then later try ./autogen.sh --system,
configure isn't invoked with the requested params. Instead
config.status --recheck is run.
When libpcap is not available, the NWFilter driver provides a
no-op stub for the DHCP snooping initialization. This was
mistakenly returning '-1' instead of '0', so the entire driver
initialization failed
'boot' tag shouldn't be exclusive with 'kernel', 'initrd', and 'cmdline',
though the boot sequence doesn't make sense when the guest boots from
kernel directly. But it's useful if booting from kernel is to install
a newguest, even if it's not to install a guest, there is no hurt. And
on the other hand, we allow 'boot' and the kernel tags when parsing.
