Since threadpool increments the current number of threads according to current
load, i.e. how many jobs are waiting in the queue. The count however, is
constrained by max and min limits of workers. The logic of this new API works
like this:
1) setting the minimum
a) When the limit is increased, depending on the current number of
threads, new threads are possibly spawned if the current number of
threads is less than the new minimum limit
b) Decreasing the minimum limit has no possible effect on the current
number of threads
2) setting the maximum
a) Icreasing the maximum limit has no immediate effect on the current
number of threads, it only allows the threadpool to spawn more
threads when new jobs, that would otherwise end up queued, arrive.
b) Decreasing the maximum limit may affect the current number of
threads, if the current number of threads is less than the new
maximum limit. Since there may be some ongoing time-consuming jobs
that would effectively block this API from killing any threads.
Therefore, this API is asynchronous with best-effort execution,
i.e. the necessary number of workers will be terminated once they
finish their previous job, unless other workers had already
terminated, decreasing the limit to the requested value.
3) setting priority workers
- both increase and decrease in count of these workers have an
immediate impact on the current number of workers, new ones will be
spawned or some of them get terminated respectively.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
New API to retrieve current server workerpool specs. Since it uses typed
parameters, more specs to retrieve can be further included in the pool of
supported ones.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Trying to reload/SIGUSR1 virtlogd or virtlockd fails with:
error : virNetDaemonRun:747 : internal error: Not all servers restored, cannot run server
Commit 252610f7 changed the daemon state json to allow tracking
multiple servers. However it missed clearing dmn->srvObject after
the json is empty, like the previous code paths handled. Later on in
virNewDaemonRun, dmn->srvObject is expected to be empty otherwise we
throw the above error.
https://bugzilla.redhat.com/show_bug.cgi?id=1311013
fdstream.c: In function 'virFDStreamWrite':
fdstream.c:390:29: error: logical 'or' of equal expressions [-Werror=logical-op]
if (errno == EAGAIN || errno == EWOULDBLOCK) {
^~
Fedora rawhide now uses gcc 6.0 and there is a bug with -Wlogical-op
producing false warnings.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69602
Use GCC pragma push/pop and ignore -Wlogical-op for GCC that supports
push/pop pragma and also has this bug.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Compilation for xdg-app failed due to a buggy SASL headers present on
the used runtime (org.gnome.Sdk 3.18).
In file included from rpc/virnetsaslcontext.h:24:0,
from rpc/virnetsaslcontext.c:25:
/usr/include/sasl/sasl.h:230:38: error: unknown type name 'size_t'
typedef void *sasl_realloc_t(void *, size_t);
^
/usr/include/sasl/sasl.h:235:5: error: unknown type name 'sasl_realloc_t'
sasl_realloc_t *,
Use the same workaround as commit 1be3dfd did.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The adminDispatchConnectListServers() function is generated by
our great perl script. However, it has a tiny flaw: if
adminConnectListServers() it calls fails, the control jumps onto
cleanup label where we try to free any list of servers built so
far. However, in the loop @i is unsigned (size_t) while @nresults
is signed (int). Currently, it does no harm because of the check
for @result being non-NULL. But if that ever changes in the
future, this bug will be hard to chase.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1271183
We only wait 0.5 seconds for the session daemon to start up and present
its socket, which isn't sufficient for many users. Bump up the sleep
interval and retry amount so we wait for a total of 5.0 seconds.
Let's call it modern_ret_as_list as opposed to single_ret_as_list. The
latter was able to return list of things. However the new, more modern,
version came and it is used since listAllDomains till nowadays in
ListServers.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We were using parentheses for grouping admin|remote even though we didn't
need to capture what's in it. That caused some changes to be greater
than needed and, to be honest, some confusion as well. Let's use it as
it should be used. It'll also make future changes more consistent.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For now it does not matter which ones we return as the code is similarly
complex, however it will fit in with other constructs in the future,
mainly when we will be able to generate dispatch helpers.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
virHashForEach() returns 0 if everything went nice, so our session
daemon was timing out even when there was a client connected.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1315606
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since servers know their name, there is no need to supply such
information twice. Also defeats inconsistencies.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
At first I did not want to do this, but after trying to implement some
newer feaures in the admin API I realized we need that to make our lives
easier. On the other hand they are not saved redundantly and the
virNetServer objects are still kept in a hash table.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since the daemon can manage and add (at fresh start) multiple servers,
we also should be able to add them from a JSON state file in case of a
daemon restart, so post exec restart support for multiple servers is also
provided. Patch also updates virnetdaemontest accordingly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Apparently we are not the only ones with dumb free functions
because dbus_message_unref() does not accept NULL either. But if
I were to vote, this one is even more evil. Instead of returning
an error just like we do it immediately dereference any pointer
passed and thus crash you app. Well done DBus!
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f878ebda700 (LWP 31264)]
0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
(gdb) bt
#0 0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
#1 0x00007f87be3f004e in dbus_message_unref () from /usr/lib64/libdbus-1.so.3
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
#3 0x00007f879761bd4d in qemuConnectCgroup (driver=0x7f87600a32a0, vm=0x7f87600c7550) at qemu/qemu_cgroup.c:909
#4 0x00007f87976386b7 in qemuProcessReconnect (opaque=0x7f87600db840) at qemu/qemu_process.c:3386
#5 0x00007f87bf6edfff in virThreadHelper (data=0x7f87600d5580) at util/virthread.c:206
#6 0x00007f87bb602334 in start_thread (arg=0x7f878ebda700) at pthread_create.c:333
#7 0x00007f87bb3481bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
(gdb) frame 2
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
228 dbus_message_unref(reply);
(gdb) p reply
$1 = (DBusMessage *) 0x0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 8cd1d54 consolidates both daemon and remote driver typed param
serialization functions. The consolidation now enforces client to use
VIR_TYPED_PARAM_STRING_OKAY flag to properly serialize string parameters, which
server has used for quite some time now. And this caused an issue, since the
commit had not adjusted client remote calls appropriately, thus causing a
failure in blkiotune, numatune and migration APIs (as per Xen CI tests). This
patch adjusts both remote_driver.c and gendispatch.pl to properly address this
issue.
http://lists.xenproject.org/archives/html/xen-devel/2016-02/msg01012.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Same as for deserializer, this method might get handy for admin one day.
The major reason for this patch is to stay consistent with idea, i.e.
when deserializer can be shared, why not serializer as well. The only
problem to be solved was that the daemon side serializer uses a code
snippet which handles sparse arrays returned by some APIs as well as
removes any string parameters that can't be returned to older clients.
This patch makes of the new virTypedParameterRemote datatype introduced
by one of the pvious patches.
Since the method is static to remote_driver, it can't even be used by our
daemon. Other than that, it would be useful to be able to use it with admin as
well. This patch uses the new virTypedParameterRemote datatype introduced in
one of previous patches.
Currently, the deserializer is hardcoded into remote_driver which makes
it impossible for admin to use it. One way to achieve a shared implementation
(besides moving the code to another module) would be pass @ret_params_val as a
void pointer as opposed to the remote_typed_param pointer and add a new extra
argument specifying which of those two protocols is being used and typecast
the pointer at the function entry. An example from remote_protocol:
struct remote_typed_param_value {
int type;
union {
int i;
u_int ui;
int64_t l;
uint64_t ul;
double d;
int b;
remote_nonnull_string s;
} remote_typed_param_value_u;
};
typedef struct remote_typed_param_value remote_typed_param_value;
struct remote_typed_param {
remote_nonnull_string field;
remote_typed_param_value value;
};
That would leave us with a bunch of if-then-elses that needed to be used across
the method. This patch takes the other approach using the new datatype
introduced in one of earlier commits.
In our generator for some code we put empty lines in the output
to separate blocks of code. However, in some cases we put couple
of spaces on the empty line too. It's not bug, it just isn't
nice.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The generated output is dependent on perl hashtable ordering, which
gives different results for i686 and x86_64. Fix this by sorting
the hash keys before iterating over them
https://bugzilla.redhat.com/show_bug.cgi?id=1173641
On every socket connect(2) attempt we were re-launching session
libvirtd, up to 100 times in 5 seconds.
This understandably caused some weird load races and intermittent
qemu:///session startup failures
https://bugzilla.redhat.com/show_bug.cgi?id=1271183
When we autolaunch libvirtd for session URIs, we spin in a retry
loop waiting for the daemon to start and the connect(2) to succeed.
However if we exceed the retry count, we don't explicitly raise an
error, which can yield a slew of different error messages elsewhere
in the code.
Explicitly raise the last connect(2) failure if we run out of retries.
- Add some debugging
- Make the loop dependent only on retries
- Make it explicit that connect(2) success exits the loop
- Invert the error checking logic
When we are receiving data in smaller chunks it might happen that
virNetServerClientDispatchRead() will be called multiple times. And as
that happens, if it is a message that also transfer headers, we decode
the number of them every single time and, unfortunately, also allocate
the memory for them. That causes a leak, in the best scenario.
Best viewed with '-w'.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some of the protocol files already include handing of the missing int
types such as xdr_uint64_t, some don't. To fix it everywhere, move out
of the appropriate defines to the utils/virxdrdefs.h file and include
it where needed.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
OpenBSD uses 'struct sockpeercred' instead of 'struct ucred'. Add a
configure check that detects its presence and use if in the code that
could be compiled on OpenBSD.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Commmit df8192aa introduced admin related rename and some minor
(caused by automated approach, aka sed) and some more severe isues along with
it. First reason to revert is the inconsistency with libvirt library.
Although we deal with the daemon directly rather than with a specific
hypervisor, we still do have a connection. That being said, contributors might
get under the impression that AdmDaemonNew would spawn/start a new daemon
(since it's admin API, why not...), or AdmDaemonClose would do the exact
opposite or they might expect DaemonIsAlive report overall status of the daemon
which definitely isn't the case.
The second reason to revert this patch is renaming virt-admin client. The
client tool does not necessarily have to reflect the names of the API's it's
using in his internals. An example would be 's/vshAdmConnect/vshAdmDaemon'
where noone can be certain of what the latter function really does. The former
is quite expressive about some connection magic it performs, but the latter does
not say anything, especially when vshAdmReconnect and vshAdmDisconnect were
left untouched.
virAdmConnect was named after virConnect, but after some discussions,
most of the APIs called will be working with remote daemon and starting
them virAdmDaemon will make more sense. Only possibly controversal name
is CloseCallback (de)registration, and connecting to the daemon (which
will still be Open/Close), but even this makes sense if one thinks about
the daemon being opened and closed, e.g. as file, etc.
This way all the APIs working with the daemon will start with
virAdmDaemon prefix, they will accept virAdmDaemonPtr as first parameter
and that will better suit with other namings as well (virDomain*,
virAdmServer*, etc.).
Because in virt-admin, the connection name does not refer to a struct
that would have a connect in its name, also adjust 'connname' in
clients. And because it is not used anywhere in the vsh code, move it
from there into each client.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introduce a new API to get libvirt version. It is worth noting, that
libvirt-admin and libvirt share the same version number. Unfortunately,
our existing API isn't generic enough to be used with virAdmConnectPtr
as well. Also this patch wires up this API to the virt-admin client
as a generic cmdVersion command.
VIR_DEBUG and VIR_WARN will automatically add a new line to the message,
having "\n" at the end or at the beginning of the message results in
empty lines.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The internal representation of a JSON array counts the items in
size_t. However, for some reason, when asking for the count it's
reported as int. Firstly, we need the function to return a signed
type as it's returning -1 on an error. But, not every system has
integer the same size as size_t. Therefore, lets return ssize_t.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 792f81a40e caused a regression in the libssh2 host key
verification code by changing the variable type of 'i' to unsigned.
Since one of the loops used -1 as a special value if the asking
callback was found the conversion made a subsequent test always fail.
The bug was stealth enough to pass review, compilers and coverity.
Refactor the condition to avoid problems.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1047861
Even though we hit an error in client's IO loop, we still want to
process any pending data. So instead of reporting the error right away,
we can finish the current iteration and report the error once we're done
with it. Note that the error is stored in client->error by
virNetClientMarkClose so we don't need to worry about it being reset or
rewritten by any API we call in the meantime.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Whenever a connection was closed due to keepalive timeout, we would log
a warning but the interrupted API would return rather useless generic
error:
internal error: received hangup / error event on socket
Let's report a proper keepalive timeout error and make sure it is
propagated to all pending APIs. The error should be better now:
internal error: connection closed due to keepalive timeout
Based on an old patch from Martin Kletzander.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When running the test suite using "unshare -n" we might have IPv6 but no
configured addresses. Due to AI_ADDRCONFIG getaddrinfo then fails with
EAI_NONAME which we should then treat as IPv6 unavailable.
Since its introduction in 2011 (particularly in commit f4324e3292),
the option doesn't work. It just effectively disables all incoming
connections. That's because the client private data that contain the
'keepalive_supported' boolean, are initialized to zeroes so the bool is
false and the only other place where the bool is used is when checking
whether the client supports keepalive. Thus, according to the server,
no client supports keepalive.
Removing this instead of fixing it is better because a) apparently
nobody ever tried it since 2011 (4 years without one month) and b) we
cannot know whether the client supports keepalive until we get a ping or
pong keepalive packet. And that won't happen until after we dispatched
the ConnectOpen call.
Another two reasons would be c) the keepalive_required was tracked on
the server level, but keepalive_supported was in private data of the
client as well as the check that was made in the remote layer, thus
making all other instances of virNetServer miss this feature unless they
all implemented it for themselves and d) we can always add it back in
case there is a request and a use-case for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Use I/O vector (iovec) instead of one huge memory buffer as suggested
in https://bugzilla.redhat.com/show_bug.cgi?id=1026137#c7. This avoids
doing memmove() to big buffers and performance doesn't degrade if
source (virNetClientStreamQueuePacket()) is faster than sink
(virNetClientStreamRecvPacket()).
Resolves: http://bugzilla.redhat.com/1026137
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The auto-spawn code would originally attempt to spawn the
daemon for both ENOENT and ECONNREFUSED errors from connect().
The various refactorings eventually lost this so we only
spawn the daemon on ENOENT. The result is if the daemon exits
uncleanly, so that the socket is left in the filesystem, we
will never be able to auto-spawn the daemon again.
Daemon used false logic for determining whether there were any clients.
When the timer was inactive, it was activated if at least one of the
servers did not have clients. So the bool was being flipped there and
back all the time in case there was one client, for example.
Initially introduced by fa14207368.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1240283
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Well, if a server is being destructed, all underlying services and
their sockets should disappear with it. But due to bug in our
implementation this is not the case. Yes, we are closing the sockets,
but that's not enough. We must also:
1) Unregister them from the event loop
2) Unref the service for each socket
The last step is needed, because each socket callback holds a
reference to the service object. Since in the first step we are
unregistering the callbacks, they no longer need the reference.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Although highly unlikely, nobody says that virEventAddHandle()
can't return 0 as a handle to socket callback. It can't happen
with our default implementation since all watches will have value
1 or greater, but users can register their own callback functions
(which can re-use unused watch IDs for instance). If this is the
case, weird things may happen.
Also, there's a little bug I'm fixing too, upon
virNetSocketRemoveIOCallback(), the variable holding callback ID
was not reset. Therefore calling AddIOCallback() once again would
fail. Not that we are doing it right now, but we might.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When going through the code I've notice that
virNetSocketAddIOCallback() increases the reference counter of
@socket. However, its counter part RemoveIOCallback does not. It took
me a while to realize this disproportion. The AddIOCallback registers
our own callback which eventually calls the desired callback and then
unref the @sock. Yeah, a bit complicated but it works. So, lets note
this hard learned fact in a comment in RemoveIOCallback().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
VIR_APPEND_ELEMENT would clear @srv to NULL after it successfully
inserted it thus the reference count could not be increased afterwards.
Switch to VIR_APPEND_ELEMENT_COPY. This fixes crash after terminating
the daemon.
Commit fa14207368 added forward
declaration of virNetServerPtr into virnetserver.h even though we are
keeping these in virnetserverprogram.h due to older compilers having
problems with duplicate ones.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This function accesses the number of connected clients while properly
locking the server it returns the data about.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since this is just a new option for gendispatch, it looks more like a
cleanup. The only differences handled by it are connect pointers,
private pointers and API naming customs.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If virNetServerMDNSAddEntry() fails when adding a service to a server,
it doesn't decrease the number of services. Hence access to their
members segfaults (e.g. when free()-ing the sruct).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The socket test suite has a function for checking if IPv4
or IPv6 are available, and returning a free socket. The
first bit of that will be needed in another test, so pull
that logic out into a separate helper method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
By default, getaddrinfo() will return addresses for both
IPv4 and IPv6 if both protocols are enabled, and so the
RPC code will listen/connect to both protocols too. There
may be cases where it is desirable to restrict this to
just one of the two protocols, so add an 'int family'
parameter to all the TCP related APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ref service passed as a parameter to the callback. And don't unref the
socket that is part of the service being passed at another point in code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Append privateData of the client only if there are any, otherwise the
previous value (socket data) will get there again.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When building without avahi support, we used VIR_DEBUG() to note that to
the user. However, functions that fail because of that (return NULL/-1)
did not set the error message. This was the only file that forgot to do
such thing.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We don't allow it in normal code, why would it need to be in the
generated one. IT also splits the line in perl code so it's readable.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since we don't have syntax-check for this, it has to be checked
manually. Let's hope this is the only place it happened.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This only affected the servers that re-exec themselves, which is only
virtlockd and it didn't do any mess, so this is mostly a clenaup.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is a possibility that we jump onto error label with @lockpath
still initialized to NULL. Here, the @lockpath should be unlink()-ed,
but passing there a NULL is not a good idea. Don't do that. In fact,
we should call unlink() only if we created the lock file successfully.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1200149
Even though we have a mutex mechanism so that two clients don't spawn
two daemons, it's not strong enough. It can happen that while one
client is spawning the daemon, the other one fails to connect.
Basically two possible errors can happen:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': Connection refused
or:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': No such file or directory
The problem in both cases is, the daemon is only starting up, while we
are trying to connect (and fail). We should postpone the connecting
phase until the daemon is started (by the other thread that is
spawning it). In order to do that, create a file lock 'libvirt-lock'
in the directory where session daemon would create its socket. So even
when called from multiple processes, spawning a daemon will serialize
on the file lock. So only the first to come will spawn the daemon.
Tested-by: Richard W. M. Jones <rjones@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While this thread is cleaning up the client and connection objects:
#2 virFileReadAll (path=0x7f28780012b0 "/proc/1319/stat", maxlen=maxlen@entry=1024, buf=buf@entry=0x7f289c60fc40) at util/virfile.c:1287
#3 0x00007f28adbb1539 in virProcessGetStartTime (pid=<optimized out>, timestamp=timestamp@entry=0x7f289c60fc98) at util/virprocess.c:838
#4 0x00007f28adb91981 in virIdentityGetSystem () at util/viridentity.c:151
#5 0x00007f28ae73f17c in remoteClientFreeFunc (data=<optimized out>) at remote.c:1131
#6 0x00007f28adcb7f33 in virNetServerClientDispose (obj=0x7f28aecad180) at rpc/virnetserverclient.c:858
#7 0x00007f28adba8eeb in virObjectUnref (anyobj=<optimized out>) at util/virobject.c:265
#8 0x00007f28ae74ad05 in virNetServerHandleJob (jobOpaque=<optimized out>, opaque=0x7f28aec93ff0) at rpc/virnetserver.c:205
#9 0x00007f28adbbef4e in virThreadPoolWorker (opaque=opaque@entry=0x7f28aec88030) at util/virthreadpool.c:145
In stack frame #6 the client->identity object got unref'd, but the code
that removes the event callbacks in frame #5 did not run yet as we are
trying to obtain the system identity (frames #4, #3, #2).
In other thead:
#0 virObjectUnref (anyobj=anyobj@entry=0x7f288c162c60) at util/virobject.c:264
klass = 0xdeadbeef
obj = 0x7f288c162c60
#1 0x00007f28ae71c709 in remoteRelayDomainEventCheckACL (client=<optimized out>, conn=<optimized out>, dom=dom@entry=0x7f28aecaafc0) at remote.c:164
#2 0x00007f28ae71fc83 in remoteRelayDomainEventTrayChange (conn=<optimized out>, dom=0x7f28aecaafc0, ... ) at remote.c:717
#3 0x00007f28adc04e53 in virDomainEventDispatchDefaultFunc (conn=0x7f287c0009a0, event=0x7f28aecab1a0, ...) at conf/domain_event.c:1455
#4 0x00007f28adc03831 in virObjectEventStateDispatchCallbacks (callbacks=<optimized out>, ....) at conf/object_event.c:724
#5 virObjectEventStateQueueDispatch (callbacks=0x7f288c083730, queue=0x7fff51f90030, state=0x7f288c18da20) at conf/object_event.c:738
#6 virObjectEventStateFlush (state=0x7f288c18da20) at conf/object_event.c:816
#7 virObjectEventTimer (timer=<optimized out>, opaque=0x7f288c18da20) at conf/object_event.c:562
#8 0x00007f28adb859cd in virEventPollDispatchTimeouts () at util/vireventpoll.c:459
Frame #0 is unrefing an invalid identity object while frame #2 hints
that the client is still dispatching the event.
For untrimmed backtrace see the bugzilla attachment.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1203030
As of bba93d40 all of our RPC objects are derived from
virObjectLockable. However, during rewrite some errors sneaked
in. For instance, the dispose functions to virNetClient and
virNetServerClient objects were not only freeing allocated
memory, but unlocking themselves. This is wrong. Object should
never disappear while locked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Whenever client socket was marked as closed for some reason, it could've
been changed when really closing the connection. With this patch the
proper reason is kept since the first time it's marked as closed.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
getsockopt(sock->fd, SOL_SOCKET, SO_PEERCRED, ...) sets the pid to 0
when the process that opens the connection is in another container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Since the secondary drivers are only active when the primary
driver is also the remote driver, there is no need to use the
different type specific privateData fields.
We have these configuration knobs, like max_clients and
max_anonymous_clients. They limit the number of clients
connected. Whenever the limit is reached, the daemon stops
accepting new ones and resumes if one of the connected clients
disconnects. If that's the case, a debug message is printed into
the logs. And when the daemon starts over to accept new clients
too. However, the problem is the messages have debug priority.
This may be unfortunate, because if the daemon stops accepting
new clients all of a sudden, and users don't have debug logs
enabled they have no idea what's going on. Raise the messages
level to INFO at least.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Update virNetServerClientCreateIdentity and virIdentityGetSystem
to use the new typesafe APIs for setting identity attributes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When FIPS mode is on, gnutls_dh_params_generate2 will fail if 1024 is
specified as the prime's number of bits, a bigger value works in both
cases.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Since 1b807f92, connecting with virsh to an already running session
libvirtd fails with:
$ virsh list --all
error: failed to connect to the hypervisor
error: no valid connection
error: Failed to connect socket to
'/run/user/1000/libvirt/libvirt-sock': Transport endpoint is already
connected
This is caused by a logic error in virNetSocketNewConnectUnix: even if
the connection to the daemon socket succeeded, we still try to spawn the
daemon and then connect to it.
This commit changes the logic to not try to spawn libvirtd if we
successfully connected to its socket.
Most of this commit is whitespace changes, use of -w is recommended to
look at it.
Coverity complained about the following:
(3) Event ptr_arith:
Performing pointer arithmetic on "cur_fd" in expression "cur_fd++".
130 return virNetServerServiceNewFD(*cur_fd++,
The complaint is that pointer arithmetic taking place instead of the
expected auto increment of the variable... Adding some well placed
parentheses ensures our order of operation.
I noticed a line 'int nparams = 0;;' in remote_dispatch.h, and
tracked down where it was generated. While at it, I found a
couple of other double semicolons. Additionally, I noticed that
commit df0b57a95 left a stale reference to the file name
remote_dispatch_bodies.h.
* src/conf/numatune_conf.c (virDomainNumatuneNodeParseXML): Drop
empty statement.
* tests/virdbustest.c (testMessageStruct, testMessageSimple):
Likewise.
* src/rpc/gendispatch.pl (remote_dispatch_bodies.h): Likewise, and
update stale comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since '1b807f92d' - Coverity complains that in the error paths of
both virFork() and virProcessWait() that the 'passfd' will not be closed.
Added the VIR_FORCE_CLOSE(passfd) and initialized it to -1.
Also noted that variable 'buf' was never really used - so I removed it
