Some CDROM devices are reported by udev to have an ID_TYPE="generic"
thus it is necessary to check if ID_CDROM is present.
As a side effect, treating ID_TYPE="generic" as a missing ID_TYPE will
enable checks for ID_DRIVE_FLASH_SD and ID_DRIVE_FLOPPY and the
udevKludgeStorageType heuristic.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Since it is an abbreviation, SCSI should always be fully
capitalized or full lower case, never Scsi.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virNodeDeviceListCaps will always return empty for a pci nodedevice,
actually it should return 'pci'.
It is because the loop variable ncaps isn't increased.
Introduced by commit be2636f.
https://bugzilla.redhat.com/show_bug.cgi?id=1081932
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As part of the goal to get away from doing string matching on
filenames when deciding whether to emit a log message, turn
the virLogSource enum into a struct which contains a log
"name". There will eventually be one virLogSource instance
statically declared per source file. To minimise churn in this
commit though, a single global instance is used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/network/bridge_driver.c: Consistently use commas.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/storage/storage_backend_rbd.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Thie patch fixes the segfault:
error : nodeStateInitialize:658 : DBus not available,
disabling HAL driver: internal error: Unable to get DBus
system bus connection: Failed to connect to socket
/var/run/dbus/system_bus_socket: No such file or directory
error : nodeStateInitialize:719 : ?:
Caught Segmentation violation dumping internal log buffer:
This segfault occurs at the below VIR_ERROR:
failure:
if (dbus_error_is_set(&err)) {
VIR_ERROR(_("%s: %s"), err.name, err.message);
When virDBusGetSystemBus fails, the code jumps to the above failure
path. However, the err variable is not correctly initialized
before calling virDBusGetSystemBus. As a result, dbus_error_is_set
may pass over the uninitialized err variable whose name or
message may point to somewhere unknown memory region, which
causes a segfault on VIR_ERROR.
The new code initializes the err variable before calling
virDBusGetSystemBus.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that all APIs which list node device objects filter
them against the access control system.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=979290https://bugzilla.redhat.com/show_bug.cgi?id=979330
The node device driver was written with the assumption that udev would
use a "change" event to notify libvirt of any change to device status
(including the name of the driver it was bound to). It turns out this
is not the case (see Comment 4 of BZ 979290). That means that a
dumpxml for a device would always show whatever driver happened to be
bound at the time libvirt was started (when the node device cache was
built).
There was already code in the driver (for the benefit of the HAL
backend) that updated the driver name from sysfs each time a device's
info was retrieved from the cache. This patch just enables that manual
update for the udev backend as well.
This includes adding it to the nodedev parser and formatter, docs, and
test.
An example of the new iommuGroup element that is a part of the output
from "virsh nodedev-dumpxml" (virNodeDeviceGetXMLDesc()):
<device>
<name>pci_0000_02_00_1</name>
<capability type='pci'>
...
<iommuGroup number='12'>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/>
</iommuGroup>
</capability>
</device>
The xml outputed by HAL backend for scsi generic device:
<device>
<name>pci_8086_2922_scsi_host_scsi_device_lun0_scsi_generic</name>
<path>/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/scsi_generic/sg0</path>
<parent>pci_8086_2922_scsi_host_scsi_device_lun0</parent>
<capability type='scsi_generic'>
<char>/dev/sg0</char>
</capability>
</device>
Since scsi generic device doesn't have DEVTYPE property set, the
only way to know if it's a scsi generic device or not is to read
the "SUBSYSTEM" property.
The XML of the scsi generic device will be like:
<device>
<name>scsi_generic_sg0</name>
<path>/sys/devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0/scsi_generic/sg0</path>
<parent>scsi_0_0_0_0</parent>
<capability type='scsi_generic'>
<char>/dev/sg0</char>
</capability>
</device>
Checking if the "devtype" is NULL along with each "if" statements
is bad. It wastes the performance, and also not good for reading.
And also when the "devtype" is NULL, the logic is also not clear.
This reorgnizes the logic of with "if...else" and a bunch of "else if".
Other changes:
* Change the function style.
* Remove the useless debug statement.
* Get rid of the goto
* New helper udevDeviceHasProperty to simplify the logic for checking
if a property is existing for the device.
* Add comment to clarify "PCI devices don't set the DEVTYPE property"
* s/sysfs path/sysfs name/, as udev_device_get_sysname returns the
name instead of the full path. E.g. "sg0"
* Refactor the comment for setting VIR_NODE_DEV_CAP_NET cap type
a bit.
Call virLogVMessage instead of virLogMessage, since libudev
called us with a va_list object, not a list of arguments.
Honor message priority and strip the trailing newline.
https://bugzilla.redhat.com/show_bug.cgi?id=969152
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
In renaming driver API implementations to match the
public API naming scheme, a few cases in the node
device driver were missed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the non linux case some callers like gather_scsi_host_caps needed the
return code of -1 while others like update_caps needed an empty
statement (to avoid a "statement without effect" warning). This is much
simpler solved by using a function instead of a define.
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
POSIX says that both basename() and dirname() may return static
storage (aka they need not be thread-safe); and that they may but
not must modify their input argument. Furthermore, <libgen.h>
is not available on all platforms. For these reasons, you should
never use these functions in a multi-threaded library.
Gnulib instead recommends a way to avoid the portability nightmare:
gnulib's "dirname.h" provides useful thread-safe counterparts. The
obvious dir_name() and base_name() are GPL (because they malloc(),
but call exit() on failure) so we can't use them; but the LGPL
variants mdir_name() (malloc's or returns NULL) and last_component
(always points into the incoming string without modifying it,
differing from basename semantics only on corner cases like the
empty string that we shouldn't be hitting in the first place) are
already in use in libvirt. This finishes the swap over to the safe
functions.
* cfg.mk (sc_prohibit_libgen): New rule.
* src/util/vircgroup.c: Fix offenders.
* src/parallels/parallels_storage.c (parallelsPoolAddByDomain):
Likewise.
* src/parallels/parallels_network.c (parallelsGetBridgedNetInfo):
Likewise.
* src/node_device/node_device_udev.c (udevProcessSCSIHost)
(udevProcessSCSIDevice): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.
* src/util/virpci.c (virPCIGetDeviceAddressFromSysfsLink):
Likewise.
* src/util/virstoragefile.h (_virStorageFileMetadata): Avoid false
positive.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The nodedev driver currently only detects harddisk, cdrom
and floppy devices. This adds support for SD cards, which
are common storage for ARM devices, eg the Google ChromeBook
<device>
<name>block_mmcblk0_0xb1c7c08b</name>
<parent>computer</parent>
<capability type='storage'>
<block>/dev/mmcblk0</block>
<drive_type>sd</drive_type>
<serial>0xb1c7c08b</serial>
<size>15758000128</size>
<logical_block_size>512</logical_block_size>
<num_blocks>30777344</num_blocks>
</capability>
</device>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virPCIGetVirtualFunctions returns 0 even if there is no "virtfn"
entry under the device sysfs path.
And virPCIGetVirtualFunctions returns -1 when it fails to get
the PCI config space of one VF, however, with keeping the
the VFs already detected.
That's why udevProcessPCI and gather_pci_cap use logic like:
if (!virPCIGetVirtualFunctions(syspath,
&data->pci_dev.virtual_functions,
&data->pci_dev.num_virtual_functions) ||
data->pci_dev.num_virtual_functions > 0)
data->pci_dev.flags |= VIR_NODE_DEV_CAP_FLAG_PCI_VIRTUAL_FUNCTION;
to tag the PCI device with "virtual_function" cap.
However, this results in a VF will aslo get "virtual_function" cap.
This patch fixes it by:
* Ignoring the VF which has failure of getting PCI config space
(given that the successfully detected VFs are kept , it makes
sense to not give up on the failure of one VF too) with a warning,
so virPCIGetVirtualFunctions will not return -1 except out of memory.
* Free the allocated *virtual_functions when out of memory
And thus the logic can be changed to:
/* Out of memory */
int ret = virPCIGetVirtualFunctions(syspath,
&data->pci_dev.virtual_functions,
&data->pci_dev.num_virtual_functions);
if (ret < 0 )
goto out;
if (data->pci_dev.num_virtual_functions > 0)
data->pci_dev.flags |= VIR_NODE_DEV_CAP_FLAG_PCI_VIRTUAL_FUNCTION;
This abstracts nodeDeviceVportCreateDelete as an util function
virManageVport, which can be further used by later storage patches
(to support persistent vHBA, I don't want to create the vHBA
using the public API, which is not good).
This enrichs HBA's xml by dumping the number of max vports and
vports in use. Format is like:
<capability type='vport_ops'>
<max_vports>164</max_vports>
<vports>5</vports>
</capability>
* docs/formatnode.html.in: (Document the new XML)
* docs/schemas/nodedev.rng: (Add the schema)
* src/conf/node_device_conf.h: (New member for data.scsi_host)
* src/node_device/node_device_linux_sysfs.c: (Collect the value of
max_vports and vports)
This adds two util functions (virIsCapableFCHost and virIsCapableVport),
and rename helper check_fc_host_linux as detect_scsi_host_caps,
check_capable_vport_linux is removed, as it's abstracted to the util
function virIsCapableVport. detect_scsi_host_caps nows detect both
the fc_host and vport_ops capabilities. "stat(2)" is replaced with
"access(2)" for saving.
* src/util/virutil.h:
- Declare virIsCapableFCHost and virIsCapableVport
* src/util/virutil.c:
- Implement virIsCapableFCHost and virIsCapableVport
* src/node_device/node_device_linux_sysfs.c:
- Remove check_capable_vport_linux
- Rename check_fc_host_linux as detect_scsi_host_caps, and refactor
it a bit to detect both fc_host and vport_os capabilities
* src/node_device/node_device_driver.h:
- Change/remove the related declarations
* src/node_device/node_device_udev.c: (Use detect_scsi_host_caps)
* src/node_device/node_device_hal.c: (Likewise)
* src/node_device/node_device_driver.c (Likewise)
The use of 'stat' in nodeDeviceVportCreateDelete is only to check
if the file exists or not, it's a bit overkill, and safe to replace
with the wrapper of access(2) (virFileExists).
"open_wwn_file" in node_device_linux_sysfs.c is redundant, on one
hand it duplicates work of virFileReadAll, on the other hand, it's
waste to use a function for it, as there is no other users of it.
So I don't see why the file opening work cannot be done in
"read_wwn_linux".
"read_wwn_linux" can be abstracted as an util function. As what all
it does is to read the sysfs entry.
So this patch removes "open_wwn_file", and abstract "read_wwn_linux"
as an util function "virReadFCHost" (a more general name, because
after changes, it can read each of the fc_host entry now).
* src/util/virutil.h: (Declare virReadFCHost)
* src/util/virutil.c: (Implement virReadFCHost)
* src/node_device/node_device_linux_sysfs.c: (Remove open_wwn_file,
and read_wwn_linux)
src/node_device/node_device_driver.h: (Remove the declaration of
read_wwn_linux, and the related macros)
src/libvirt_private.syms: (Export virReadFCHost)
This just simply changes nodeDeviceLookupByWWN to be not static,
and its name into nodeDeviceLookupSCSIHostByWWN. And use that for
udev and HAL backends.
Commit 2025356 missed uses of PCI functions in the older HAL-related
code, probably because hal-devel is no longer available in latest Fedora.
* src/node_device/node_device_hal.c (gather_pci_cap): Reflect
function rename.
Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The only important state that should prevent libvirtd shutdown
is from running VMs. Networks, host devices, network filters
and storage pools are all long lived resources that have no
significant in-memory state. They should not block shutdown.
The virStateInitialize method and several cgroups methods were
using an 'int privileged' parameter or similar for dual-state
values. These are better represented with the bool type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'const char *category' parameter only has a few possible
values now that the filename has been separated. Turn this
parameter into an enum instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the logging APIs have a 'const char *category' parameter
which indicates where the log message comes from. This is typically
a combination of the __FILE__ string and other prefix. Split the
__FILE__ off into a dedicated parameter so it can passed to the
log outputs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Update the node device driver to use virReportError instead of
the virNodeDeviceReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Error: STRING_NULL:
/libvirt/src/node_device/node_device_linux_sysfs.c:80:
string_null_argument: Function "saferead" does not terminate string "*buf".
/libvirt/src/util/util.c:101:
string_null_argument: Function "read" fills array "*buf" with a non-terminated string.
/libvirt/src/node_device/node_device_linux_sysfs.c:87:
string_null: Passing unterminated string "buf" to a function expecting a null-terminated string.
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.
The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.
Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
I noticed these compiler warnings when building for the s390 architecture.
* src/node_device/node_device_udev.c (udevDeviceMonitorStartup):
Mark unused variable.
* src/nodeinfo.c (linuxNodeInfoCPUPopulate): Avoid unused variable.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The auto-generated WWN comply with the new addressing schema of WWN:
<quote>
the first nibble is either hex 5 or 6 followed by a 3-byte vendor
identifier and 36 bits for a vendor-specified serial number.
</quote>
We choose hex 5 for the first nibble. And for the 3-bytes vendor ID,
we uses the OUI according to underlying hypervisor type, (invoking
virConnectGetType to get the virt type). e.g. If virConnectGetType
returns "QEMU", we use Qumranet's OUI (00:1A:4A), if returns
ESX|VMWARE, we use VMWARE's OUI (00:05:69). Currently it only
supports qemu|xen|libxl|xenapi|hyperv|esx|vmware drivers. The last
36 bits are auto-generated.
This patch is to expose the fabric_name of fc_host class, which
might be useful for users who wants to known which fabric the
(v)HBA connects to.
The patch also adds the missed capabilities' XML schema of scsi_host,
(of course, with fabric_wwn added), and update the documents
(docs/formatnode.html.in)
Coverity complained that most, but not all, clients of virUUIDParse
were checking for errors. Silence those coverity warnings by
explicitly marking the cases where we trust the input, and fixing
one instance that really should have been checking. In particular,
this silences a rather large percentage of the warnings I saw on my
most recent Coverity analysis run.
* src/util/uuid.h (virUUIDParse): Enforce rules.
* src/util/uuid.c (virUUIDParse): Drop impossible check; at least
Coverity will detect if we break rules and pass NULL.
* src/xenapi/xenapi_driver.c (xenapiDomainCreateXML)
(xenapiDomainLookupByID, xenapiDomainLookupByName)
(xenapiDomainDefineXML): Ignore return when we trust data source.
* src/vbox/vbox_tmpl.c (nsIDtoChar, vboxIIDToUUID_v3_x)
(vboxCallbackOnMachineStateChange)
(vboxCallbackOnMachineRegistered, vboxStoragePoolLookupByName):
Likewise.
* src/node_device/node_device_hal.c (gather_system_cap): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr): Check for errors.
Xen PV domU's have no PCI bus. node_device_udev.c calls pci_system_init
which looks for /sys/bus/pci. If it does not find /sys/bus/pci (which it
won't in a Xen PV domU) it returns unsuccesfully (ENOENT), which libvirt
considers fatal. This makes libvirt unusable in this environment, even
though there are plenty of valid virtualisation options that work
there (LXC, UML, and QEmu spring to mind)
https://bugzilla.redhat.com/show_bug.cgi?id=709471
Signed-off-by: Soren Hansen <soren@linux2go.dk>
This patch moves some of the sriov related pci code from node_device driver
to src/util/pci.[ch]. Some functions had to go thru name and argument list
change to accommodate the move.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.
v2:
Actually add APIs to libvirt.h
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
If we plow on after udev_device_get_syspath fails, we will hit a NULL
dereference. Clang found one due to strdup later in udevSetParent,
but in fact we hit a NULL dereference sooner because of the use of
STREQ within virNodeDeviceFindBySysfsPath.
* src/conf/node_device_conf.h (virNodeDeviceFindBySysfsPath): Mark
path argument non-null.
* src/node_device/node_device_udev.c (udevSetParent): Avoid null
dereference.
This matches the public API and helps to get rid of some special
case code in the remote generator.
Rename driver API functions and XDR protocol structs.
No functional change included outside of the remote generator.
We already have virAsprintf, so picking a similar name helps for
seeing a similar purpose. Furthermore, the prefix V before printf
generally implies 'va_list', even though this variant was '...', and
the old name got in the way of adding a new va_list version.
global rename performed with:
$ git grep -l virBufferVSprintf \
| xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g'
then revert the changes in ChangeLog-old.
We're seeing bugs apparently resulting from thread unsafety of
libpciaccess, such as
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/726099
To prevent those, as suggested by danpb on irc, move the
nodeDeviceLock(driverState) higher into the callers. In
particular:
udevDeviceMonitorStartup should hold the lock while calling
udevEnumerateDevices(), and udevEventHandleCallback should hold it
over its entire execution.
It's not clear to me whether it is ok to hold the
nodeDeviceLock while taking the virNodeDeviceObjLock(dev) on a
device. If not, then the lock will need to be dropped around
the calling of udevSetupSystemDev(), and udevAddOneDevice()
may not actually be safe to call from higher layers with the
driverstate lock held.
libvirt 0.8.8 with this patch on it seems to work fine for me.
Assuming it looks ok and I haven't done anything obviously dumb,
I'll ask the bug submitters to try this patch.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Even with -Wuninitialized (which is part of autobuild.sh
--enable-compile-warnings=error), gcc does NOT catch this
use of an uninitialized variable:
{
if (cond)
goto error;
int a = 1;
error:
printf("%d", a);
}
which prints 0 (supposing the stack started life wiped) if
cond was true. Clang will catch it, but we don't use clang
as often. Using gcc -Wjump-misses-init catches it, but also
gives false positives:
{
if (cond)
goto error;
int a = 1;
return a;
error:
return 0;
}
Here, a was never used in the scope of the error block, so
declaring it after goto is technically fine (and clang agrees).
However, given that our HACKING already documents a preference
to C89 decl-before-statement, the false positive warning is
enough of a prod to comply with HACKING.
[Personally, I'd _really_ rather use C99 decl-after-statement
to minimize scope, but until gcc can efficiently and reliably
catch scoping and uninitialized usage bugs, I'll settle with
the compromise of enforcing a coding standard that happens to
reject false positives if it can also detect real bugs.]
* acinclude.m4 (LIBVIRT_COMPILE_WARNINGS): Add -Wjump-misses-init.
* src/util/util.c (__virExec): Adjust offenders.
* src/conf/domain_conf.c (virDomainTimerDefParseXML): Likewise.
* src/remote/remote_driver.c (doRemoteOpen): Likewise.
* src/phyp/phyp_driver.c (phypGetLparNAME, phypGetLparProfile)
(phypGetVIOSFreeSCSIAdapter, phypVolumeGetKey)
(phypGetStoragePoolDevice)
(phypVolumeGetPhysicalVolumeByStoragePool)
(phypVolumeGetPath): Likewise.
* src/vbox/vbox_tmpl.c (vboxNetworkUndefineDestroy)
(vboxNetworkCreate, vboxNetworkDumpXML)
(vboxNetworkDefineCreateXML): Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject)
(xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/security/security_selinux.c (SELinuxGenNewContext):
Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia):
Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetPtyPaths):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainShutdown)
(qemudDomainBlockStats, qemudDomainMemoryPeek): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendCreateIfaceIQN): Likewise.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
https://bugzilla.redhat.com/show_bug.cgi?id=684655 points out
a regression introduced in commit 2215050edd - non-root users
can't connect to qemu:///session because libvirtd dies when
it can't use pciaccess initialization.
* src/node_device/node_device_udev.c (udevDeviceMonitorStartup):
Don't abort udev driver (and libvirtd overall) if non-root user
can't use pciaccess.
Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'
followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.
* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
Most of te VIR_INFO calls in the udev driver are only relevant
to developers so can switch to VIR_DEBUG. Failure to initialize
libpciaccess though is a fatal error
* src/node_device/node_device_udev.c: Adjust log levels
The Linux kernel headers don't have a value for SCSI type 12,
but HAL source code shows this to be a 'raid'. Add workaround
for this type. Lower log level for unknown types since
this is not a fatal error condition. Include the device sysfs
path in the log output to allow identification of which device
has problems.
* src/node_device/node_device_udev.c: Add SCSI RAID type
libpciaccess has many bugs in its pci_system_init/cleanup
functions that makes calling them multiple times unwise.
eg it will double close() FDs, and leak other FDs.
* src/node_device/node_device_udev.c: Only initialize
libpciaccess once
The udev driver does not update a PCI device with its SR-IOV capabilities,
when applicable, the way the hal driver does. As a result, dumping the
device's XML will not include the relevant physical or virtual function
information.
With this patch, the XML is correct:
# virsh nodedev-dumpxml pci_0000_09_00_0
<device>
<name>pci_0000_09_00_0</name>
<parent>pci_0000_00_1c_0</parent>
<driver>
<name>vxge</name>
</driver>
<capability type='pci'>
<domain>0</domain>
<bus>9</bus>
<slot>0</slot>
<function>0</function>
<product id='0x5833'>X3100 Series 10 Gigabit Ethernet PCIe</product>
<vendor id='0x17d5'>Neterion Inc.</vendor>
<capability type='virt_functions'>
<address domain='0x0000' bus='0x0a' slot='0x00' function='0x1'/>
<address domain='0x0000' bus='0x0a' slot='0x00' function='0x2'/>
<address domain='0x0000' bus='0x0a' slot='0x00' function='0x3'/>
</capability>
</capability>
</device>
# virsh nodedev-dumpxml pci_0000_0a_00_1
<device>
<name>pci_0000_0a_00_1</name>
<parent>pci_0000_00_1c_0</parent>
<driver>
<name>vxge</name>
</driver>
<capability type='pci'>
<domain>0</domain>
<bus>10</bus>
<slot>0</slot>
<function>1</function>
<product id='0x5833'>X3100 Series 10 Gigabit Ethernet PCIe</product>
<vendor id='0x17d5'>Neterion Inc.</vendor>
<capability type='phys_function'>
<address domain='0x0000' bus='0x09' slot='0x00' function='0x0'/>
</capability>
</capability>
</device>
Cc: Dave Allan <dallan@redhat.com>
Signed-off-by: Chris Wright <chrisw@redhat.com>
This patch adds a mode_t parameter to virFileWriteStr().
If mode is different from 0, virFileWriteStr() will try
to create the file if it doesn't exist.
* src/util/util.h (virFileWriteStr): Alter signature.
* src/util/util.c (virFileWriteStr): Allow file creation.
* src/network/bridge_driver.c (networkEnableIpForwarding)
(networkDisableIPV6): Adjust clients.
* src/node_device/node_device_driver.c
(nodeDeviceVportCreateDelete): Likewise.
* src/util/cgroup.c (virCgroupSetValueStr): Likewise.
* src/util/pci.c (pciBindDeviceToStub, pciUnBindDeviceFromStub):
Likewise.
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
node_device/node_device_driver.c: In function 'nodeDeviceVportCreateDelete':
node_device/node_device_driver.c:423: error: implicit declaration of function 'stat' [-Wimplicit-function-declaration]
* src/node_device/node_device_driver.c (includes): Add <sys/stat.h>.
Some kernels, such as the one used in RHEL-5, have vport_create and
vport_delete operation files in /sys/class/scsi_host/hostN directory
instead of /sys/class/fc_host/hostN. Let's check both paths for
compatibility reasons.
This also removes unnecessary '/' characters from sysfs paths containing
LINUX_SYSFS_FC_HOST_PREFIX.
We only use libpciaccess for resolving device product/vendor. If
initializing the library fails (say if using qemu:///session), don't
warn so loudly, and carry on as usual.
* This patch is a modification of a patch submitted by Nigel Jones.
It fixes several memory leaks on device addition/removal:
1. Free the virNodeDeviceDefPtr in udevAddOneDevice if the return
value is non-zero
2. Always release the node device reference after the device has been
processed.
* Refactored for better readability per the suggestion of clalance
HAL is deprecated and UDEV is the future. Thus if both
options are compiled, we should prefer use of UDEV over
HAL
* src/node_device/node_device_driver.c: Switch init
order to try UDEV first, then HAL
* It appears that the udev event for HBA creation arrives before the
associated sysfs data is fully populated, resulting in bogus data
for the nodedev entry until the entry is refreshed. This problem is
particularly troublesome when creating NPIV vHBAs because it results
in libvirt failing to find the newly created adapter and waiting for
the full timeout period before erroneously failing the create
operation. This patch forces an update before any attempt to use
any scsi_host nodedev entry.
* If a nodedev has a parent that we don't want to display, we should
continue walking up the udev device tree to see if any of its
earlier ancestors are devices that we display. It makes the tree
much nicer looking than having a whole lot of devices hanging off
the root node.
* Incorporated Jim's feedback (v1 & v2)
* Moved case of DEVTYPE == "wlan" up as it's definitive that we have a network interface.
* Made comment more detailed about the wired case to explain better
how it differentiates between wired network interfaces and USB
devices.
Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file
* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
new host_uuid config option to test
We were over-writing a pointer without freeing it in
case of a disk device, leading to a memory leak.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
All other uses of get_str_prop in this file that ignored
failure explicitly cast to void.
* src/node_device/node_device_hal.c (dev_create): Silence coverity
warning.
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match
The original udev node device backend neglected to lock the driverState
struct containing the device list when adding and removing devices
* src/node_device/node_device_udev.c: add necessary locks in
udevRemoveOneDevice() and udevAddOneDevice()
udevGetUintProperty was called with base set to 0 for busnum and devnum.
With base 0 strtoul parses the number as octal if it start with a 0. But
busnum and devnum are decimal and udev returns them padded with leading
zeros. So strtoul parses them as octal. This works for certain decimal
values like 001-007, but fails for values like 008.
Change udevProcessUSBDevice to use base 10 for busnum and devnum.
it causes a NULL-dereference on some systems like Solaris 10.
* src/node_device/node_device_linux_sysfs.c. Include <stdlib.h>.
(get_sriov_function): Use canonicalize_file_name, not realpath.
* bootstrap (modules): Add canonicalize-lgpl.
This fixes a segfault when the event handler is called after shutdown
when the global driver state is NULL again.
Also fix a locking issue in an error path.
Two files were using functions from <sys/stat.h> but not including
in. Most of the time they got this automatically via another header,
but certain build flag combinations can reveal the problem
* src/lxc/lxc_container.c, src/node_device/node_device_linux_sysfs.c:
Add <sys/stat.h>
I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
VIR_DEBUG
VIR_DEBUG0
VIR_ERROR
VIR_ERROR0
VIR_INFO
VIR_WARN
VIR_WARN0
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
udev doesn't prefix USB product/vendor info with '0x', so the
strtol conversions were wrong for the product field (vendor already
set the correct base). Make the change for PCI product/vendor as
well to be safe.
This fixes USB device assignment via virt-manager.
This invalid free results in heap corruption. Some symptoms I saw
because of this were libvirtd crashing and virt-manager hanging
while trying to enumerate devices.
* src/node_device/node_device_driver.c (update_driver_name): The
previous code would write one byte beyond the end of the 4KiB
stack buffer when presented with a symlink value of exactly that
length (very unlikely). Remove the automatic buffer and use
virFileResolveLink in place of readlink. Suggested by Daniel Veillard.
src/node_device/node_device_udev.c was using a function available only
on the daemon code, fix this and use the function available globally
* src/node_device/node_device_udev.c: replace use of virEventAddHandleImpl
by virEventAddHandle
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
I realized that I inadvertently added a member to the def struct to
contain each device's sysfs path when there was an existing member in the
dev struct for "OS specific path to device metadat, eg sysfs" Since the
udev backend needs to record the sysfs path while it's in the process of
creating the device, before the dev struct gets allocated, I chose to
remove the member from the dev struct.
* src/conf/node_device_conf.c src/conf/node_device_conf.h
src/node_device/node_device_driver.c src/node_device/node_device_hal.c
src/node_device/node_device_udev.c: remove devicePath from the
structure and use def->sysfs_path instead
The HAL driver returns a fatal error code in the case where HAL
is not running. This causes the entire libvirtd daemon to quit
which isn't desirable. Instead it should simply disable the HAL
driver
* src/node_device/node_device_hal.c: Quietly disable HAL if it is
not running
There is a race condition in HAL driver startup where the callback
can get triggered before we have finished startup. This then causes
a deadlock in the driver.
* src/node_device/node_device_hal.c: RElease driver lock before
registering DBus callbacks
uses libpciaccess to provide human readable names for PCI vendor and
device IDs
* configure.in: add a requirement for libpciaccess >= 0.10.0
* src/Makefile.am: add the associated compilation flags and link
* src/node_device/node_device_udev.c: lookup the libpciaccess for
vendor name and product name based on their ids
* configure.in src/Makefile.am: remove the configuration check and
build instructions
* src/node_device/node_device_devkit.c: removed the module
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
removed references to the old backend
* src/conf/node_device_conf.h src/conf/node_device_conf.c: add specific
support for SCSI target in node device capabilities
* src/node_device/node_device_udev.c: add some extra detection code
when handling udev output
* configure.in: add new --with-udev, disabled by default, and requiring
libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
of fields in node device definitions, and an API to look them up,
remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
virBuildPath and virBuildPathInternal() function
* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c
src/lxc/lxc_controller.c src/node_device/node_device_hal.c
src/openvz/openvz_conf.c src/qemu/qemu_driver.c
src/qemu/qemu_monitor_text.c src/remote/remote_driver.c
src/storage/storage_backend_disk.c src/storage/storage_driver.c
src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c
src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code
review and those are the fixes correcting the problems
The LXC driver was mistakenly returning -1 for lxcStartup()
in scenarios that are not an error. This caused the libvirtd
to quit for unprivileged users. This fixes the return code
of LXC driver, and also adds a "name" field to the virStateDriver
struct and logging to make it easier to find these problems
in the future
* src/driver.h: Add a 'name' field to state driver to allow
easy identification during failures
* src/libvirt.c: Log name of failed driver for virStateInit
failures
* src/lxc/lxc_driver.c: Don't return a failure code for
lxcStartup() if LXC is not available on this host, simply
disable the driver.
* src/network/bridge_driver.c, src/node_device/node_device_devkit.c,
src/node_device/node_device_hal.c, src/opennebula/one_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/secret/secret_driver.c, src/storage/storage_driver.c,
src/uml/uml_driver.c, src/xen/xen_driver.c: Fill in name
field in virStateDriver struct
