The function checks whether QEMU supports TLS migration and stores the
original value of tls-creds parameter to priv->migTLSAlias. This is no
longer needed because we already have the original value stored in
priv->migParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code can be merged directly in qemuMigrationParamsAddTLSObjects.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Restore the original values of all migration parameters we store in
qemuDomainJobObj instead of explicitly resting only a limited set of
them.
The result is not strictly equivalent to the previous code wrt reseting
TLS state because the previous code would only reset it if we changed it
before while the new code will reset it always if QEMU supports TLS
migration. This is not a problem for the parameters themselves, but it
can cause spurious errors about missing TLS objects being logged at the
end of non-TLS migration. This issue will be fixed ~50 patches later.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, only job->phase is passed and both APIs will need to look at
more details about the job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Any job which touches migration parameters will first store their
original values (i.e., QEMU defaults) to qemuDomainJobObj to make it
easier to reset them back once the job finishes.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When connection to the client which controls a non-p2p migration gets
closed between Perform and Confirm phase, we don't know whether the
domain was successfully migrated or not. Thus, we have to leave the
domain paused and just cleanup the migration job and reset migration
parameters.
Previously we didn't reset the parameters and future save or snapshot
operations would see wrong environment (and could fail because of it) in
case the domain stayed running on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently migration parameters are stored in a structure which mimics
the QEMU migration parameters handled by query-migrate-parameters and
migrate-set-parameters. The new structure will become a libvirt's
abstraction on top of QEMU migration parameters, capabilities, and
related stuff.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It provides just another view on some migration parameters so let's move
it close to them. The end goal is to merge compression parameters with
the rest of migration parameters since it doesn't make any sense to
handle them differently.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's no longer used since we do not store the struct on a stack anymore.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It will get a bit more complicated soon and storing it on a stack with
{0} initializer will no longer work. We need a proper constructor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our *Free functions usually do not take a double pointer and the caller
has to make sure it doesn't use the stale pointer after the *Free
function returns.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is connected with the code which handles migration
parameters and capabilities, let's move it to qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the function is tightly connected to migration, it was renamed as
qemuMigrationCapsCheck and moved to qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the end, this will allow us to have most of the logic around
migration parameters and capabilities done in one place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now called qemuMigrationParamsFromFlags to better
reflect what it is doing: taking migration flags and params and
producing a struct with QEMU migration parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Future commits rely on the presence of this callback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If a function is disposing virSomething it should be called
virSomethingDispose(). There are two offenders:
virCapabilitiesDispose(virCapsPtr) and
virDomainXMLOptionClassDispose(virDomainXMLOptionPtr).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduced in d3db304d2e. Instead of returning immediately we
need to jump onto cleanup label where @paths is freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The (now assumed) QEMU_CAPS_CHARDEV_SPICEVMC is preferred.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Last use was removed by commit 0586cf98 deprecating
QEMU_CAPS_DEVICE.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Implied by QEMU >= 1.2.0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixed-up-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Implied by QEMU >= 0.12.0.
Deprecated by QEMU commit 1ed2fc1 included in 0.12.0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Remove the unnecessary goto error followed by goto cleanup
processing.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since there is no way to get to cleanup without dom being NULL,
this is a unnecessary Unref.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The legacy xen driver is removed, so these ACL hacks can be removed
too now.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The last use of qemuMonitorMigrateToCommand was removed years back in
commit 2e90c9daf9
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Nov 6 16:50:26 2015 +0000
qemu: assume support for all migration protocols except rdma
Prior to that commit, 'exec:' to used to replicate the 'unix:' protocol
by spawning 'nc'.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove unnecessary virFileIsExecutable check after virFindFileInPath.
Since the commit 9ae992f virFindFileInPath will reject non-executables.
Signed-off-by: Radostin Stoyanov <rstoyanov1@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Avoid the need for the drivers to explicitly check for a NULL path by
making sure it is at least the empty string.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the legacy Xen driver has been dropped, we no longer need to
support URIs such as "/path/to/xend/socket", and so can mandate that a
URI scheme must always be present.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ensuring that we don't call the virDrvConnectOpen method with a NULL URI
means that the drivers can drop various checks for NULL URIs. These were
not needed anymore since the probe functionality was split
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Declare what URI schemes a driver supports in its virConnectDriver
struct. This allows us to skip trying to open the driver entirely
if the URI scheme doesn't match.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
