In preparation to the code move to virnetdevtap.c, this change:
* renames virNetInterfaceStats to virNetDevTapInterfaceStats
* changes 'path' to 'ifname', to use the same vocable as other
method in virnetdevtap.c.
* Add the attributes checker
When vhostuser interfaces are used, the interface statistics
are not available in /proc/net/dev.
This change looks at the openvswitch interfaces statistics
tables to provide this information for vhostuser interface.
Note that in openvswitch world drop/error doesn't always make sense
for some interface type. When these informations are not available we
set them to 0 on the virDomainInterfaceStats.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the 'nleases < 0' on return, then the subsequent call to
findLeaseInJSON will not produce the expected results (passed
in as a size_t, but nleases is a ssize_t). So check if the
returned value < 0 and if so, goto cleanup.
Found by Coverity as a NEGATIVE_RETURNS event
If the allocation fails in DO_TEST_FLUSH_PROLOGUE, then 'mgr == NULL',
but the code continues on - which won't be good. So modify the macro
to cause an immediate failure and jump to a cleanup label.
Found by Coverity as FORWARD_NULL event.
There's nothing to compress if the requested snapshot memory format is
set to 'raw' explicitly. After commit 9e14689ea libvirt would try to
run /sbin/raw to process the memory stream if the qemu.conf option
snapshot_image_format is set.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1402726
Since its introduction in 2012 this internal API did nothing.
Moreover we have the same API that does exactly the same:
virSecurityManagerDomainSetPathLabel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If you've ever tried running a huge page backed guest under
different user than in qemu.conf, you probably failed. Problem is
even though we have corresponding APIs in the security drivers,
there's no implementation and thus we don't relabel the huge page
path. But even if we did, so far all of the domains share the
same path:
/hugepageMount/libvirt/qemu
Our only option there would be to set 0777 mode on the qemu dir
which is totally unsafe. Therefore, we can create dir on
per-domain basis, i.e.:
/hugepageMount/libvirt/qemu/domainName
and chown domainName dir to the user that domain is configured to
run under.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far this function takes virDomainObjPtr which:
1) is an overkill,
2) might be not available in all the places we will use it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the great rework of how we store vcpu- and iothread-related
data, we have overly complex part of code that is trying to format the
scheduler tuning data in as less lines as possible by grouping
settings for multiple threads. That was designed as an input syntax
sugar for users, but we don't need to also use that when formatting
the XML. Switching to simple enumeration makes the code nicer,
shorter and more welcoming to future changes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When redoing the website we deleted the libvirtLogo.png file
not remembering that the test driver screenshot API impl
relied on it.
Rather than having the test driver use the logo as a side
effect, give it its own dedicated image to use. This is
installed in /usr/share/libvirt/test-screenshot.png and
is taken from a NeXT Cube running WorldWideWeb[1]. The
very first web browser in existance, running on the
hardware it was originally written on.
[1] https://en.wikipedia.org/wiki/WorldWideWeb
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The *header_name* cannot be quoted, otherwise it is not translated to
the passed argument. Without this fix the generated configure contains
*ac_cv_header_header_name*, but there should be for example
*ac_cv_header_sals_sasl_h* for "sasl/sasl.h".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Qemu 2.8.0+ changes arguments structure for blockdev-add in the effort
to make it finally stable. Since libvirt recently added the detection of
gluster debug support relying on the old syntax we need to add the new
as well.
With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Adjust the spacing a bit in order to generate 'cleaner' looking output.
This matches what virDomainMemoryStats does and it creates text/code boxes
in order to list each of the stats for each category.
When changing one of the src/libvirt-*.c files to alter the docs, the
adjusted files weren't being built. Added them into APIBUILD_STAMP and
then added that to the html/index.html rule which is used for the
$(apihtml_generated) generated rule.
Also, for clean we can remove the html/*.html files
With kernel 3.18 (since commit 3e32cb2e0a12b6915056ff04601cf1bb9b44f967)
the "unlimited" value for cgroup memory limits has changed once again as
its byte value is now computed from a page counter.
The new "unlimited" value reported by the cgroup fs is therefore 2**51-1
pages which is (VIR_DOMAIN_MEMORY_PARAM_UNLIMITED - 3072). This results
e.g. in virsh memtune displaying 9007199254740988 instead of unlimited
for the limits.
This patch uses the value of memory.limit_in_bytes from the cgroup
memory root which is the system's "real" unlimited value for comparison.
See also libvirt commit 231656bbeb for the
history for kernel 3.12 and before.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
So far the NSS module looks up only hostnames as provided by
guests themselves. However, there are some cases where this is
not enough: e.g. when there's a fresh new guest being installed
(with some generic hostname) say from a live ISO image; or some
(older) systems don't advertise their hostname in DHCP
transactions at all.
In cases like that it would be helpful if we translate domain
name as seen by libvirt too so that users can:
# virsh start $dom && ssh $dom
In order to achieve that new libvirt-guest module is introduced,
while older libvirt module maintains its current behaviour (that
is translating guest provided names into IP addresses).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The part of the code that iterates over an array of JSON values
is going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The part of the code that appends found IP address into a list is
going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The name of the exported functions for an NSS module is quite
fixed, it is derived from the module name:
_nss_$module_$function
Since we will create another NSS module with very similar
implementation we might as well generate the function names at
the compile time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a module that's able to track
<domain, mac addres list> pairs, hook it up into
our network driver.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This module will be used to track:
<domain, mac address list>
pairs. It will be important to know these mappings without
libvirt connection (that is from a JSON file), because NSS
module will use those to provide better host name translation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are couple of places where we have a string and want to
save it to a file. Atomically. In all those places we use
virFileRewrite() but also implement the very same callback which
takes the string and write it into temp file. This makes no
sense. Unify the callbacks and move them to one place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Problem with VIR_FREE() is that we are not linking
libvirt-utils.so to our mock libs therefore there will be an
unresolved symbol. Fortunately, nsstest that eventually links
with the nssmock links also with libvirt-utils.so and thus the
symbol is resolved after all. However, if one wants to run the
test binary under valgrind it is impossible to do so. Because of
the unresolved symbol.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In dd7bfb2cdc I've removed locking of the network driver upon
it's allocation. However, I forgot to remove one location of the
driver unlock.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add in the block I/O throttling group parameter to the command line
if supported. If not supported, fail command creation.
Add the xml2argvtest for testing.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modify _virDomainBlockIoTuneInfo and rng schema to support the group_name
option for iotune throttling. Document the new value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have multiple bool values, create a single enum with bits
representing what fields are set. Fields are generally set in groups
of 3 (read, write, total).
Currently we build the JSON object for the "block_set_io_throttle"
command using the knowledge that a NULL for a support*Options boolean
would essentially ignore the rest of the arguments.
This may not work properly if some capability was backported, plus it just
looks rather ugly. So instead, build the "base" arguments and then if
the support*Option bool capability is set, add in the arguments on the fly.
Then append those arguments to the basic command and send to qemu.
Rather than using negative logic and setting the maxparams to a lesser
value based on which capabilities exist, alter the logic to modify the
maxparams based on a base value plus the found capabilities. Reduces the
chance that some backported feature produces an incorrect value.
These features are included:
AVX512DQ, AVX512IFMA, AVX512BW, AVX512VL, AVX512VBMI, AVX512_4VNNIW and
AVX512_4FMAPS.
qemu commits: cc728d14 and 95ea69fb
Signed-off-by: Lin Ma <lma@suse.com>
Commit id '03e750f3' added support for checking the PLOOP type; however,
it used 'target.type' which no storage code ever fills in, so it will
never be set. Change to just vol->type (could use vol->target.format
as well).
Add test cases for address conflicts between disks and hostdevs that are
using drive addresses.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Add a global check for duplicate drive addresses. This will fix the
problem of duplicate disk and hostdev drive addresses.
Example for duplicate drive addresses:
<disk>
...
<target name='sda'/>
</disk>
<disk>
...
<target name='sdb'/>
<address type='drive' controller=0 bus=0 target=0 unit=0/>
</disk>
Another example:
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
...
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
...
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
Unfortunately the fixes (1b08cc170a,
8d46386bfe) weren't enough to catch these
cases and it isn't possible to add additional checks in
virDomainDeviceDefPostParseInternal() for SCSI hostdevs or
virDomainDiskDefAssignAddress() for SCSI/IDE/FDC/SATA disks without
adding another parse flag (virDomainDefParseFlags) to disable this
validation while updating or detaching a disk or hostdev.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
