Adapt the configuration of redirects from the server hosting libvirt.org
The redirect to the 'libvirt-console-proxy' Golang module is not adapted
as it doesn't exist on the current server.
NOTES:
- The redirects are currently configured for hosting via the
'gitlab.io/libvirt' URI. For hosting via custom domain it will need
to be rewritten to drop the '/libvirt' prefixes.
- gitlab pages doesn't currently support redirects to outside content,
thus most of the redirects don't actually work:
https://gitlab.com/gitlab-org/gitlab-pages/-/issues/601
- The redirects file is only installed in the webpage job but is not
actually distributed.
- The validity of the redirects can be checked by visiting:
https://libvirt.gitlab.io/_redirects
Having them installed allows us to validate them before we'll be
switching to use gitlab pages completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
On pushes to master publish the webpage (built in the 'website_job' job)
via gitlab pages. The 'pages' job uses the default image that gitlab
assumes as it's consuming artifacts from an existing job and naming
them properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The latest lcitool merged the 'prebuilt-env' and 'local-env' jobs into
one which use variables to pick up the right environment and steps
rather than duplicating everything.
Regenerate the generated job definitions, fix the helper definitions
and also fix the manually defined jobs (website-job).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Rewrite the function so that it's more compact and easier to
extend as new architectures, which will likely come with
multibus support right out the gate, are introduced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It belongs next to qemuDomainSupportsPCI().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way the function is currently written sort of obscures this
fact, but ultimately we already unconditionally assume PCI
support on most architectures.
Arm and RISC-V need some additional checks to maintain
compatibility with existing configurations but for all future
architectures, such as the upcoming LoongArch64, we expect PCI
support to come out of the box.
Last but not least, the functions is made const-correct.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's no longer used anywhere.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For all versions of QEMU that we support, the virt machine type
has a hard dependency on this device, so we can stop checking
whether the capability is present and just use it unconditionally.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For all supported QEMU version, the virt machine type has a hard
dependency on PCI support, so if we want to test virtio-balloon
together with virtio-mmio we have to either request that
explicitly or trick libvirt by masking capabilities. Do the
former instead of the latter.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop everything that's not directly related to the scenario
being tested.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of these are either a subset of other tests, or provide
coverage for scenarios that are not really possible: for all
versions of QEMU that we support, the virt machine type has a
hard dependency on the generic PCIe controller, which means
that we will never need to fall back to virtio-mmio.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though virtio-mmio is no longer the default on either
architecture, and likely nobody is using it at this point, we
still provide a way to opt into virtio-mmio usage and want to
keep existing guests working. Add explicit test suite coverage
for this scenario.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After commit 1d8454639f (libvirt 3.0.0), the default address
type for aarch64/virt guests is PCI. These tests are then
pointless, as they are just a subset of other tests, and the
comment attached to them inaccurate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The bus name for the default PHB is always "pci.0".
Fixes: 937f319536
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the same as the existing pseries-phb-simple, except that
each of the controllers is given a user alias. If we tried to
start the resulting guest, we'd get an error:
Bus 'ua-phb0' not found
This is because, at the QEMU command line level, the default PHB
is not represented and so it can't be given a custom alias. We're
going to address this issue in a follow-up commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to make sure that not only the controllers themselves
are added correctly, but also that devices attached to them
get assigned the expected bus value. In order to do that add
some devices, one per controller.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Re-parse and re-format the output XML to validate that the auto-added
bits and the formatter always agree. There's no way to specify an
alternative output file as a libvirt-formatted XML must be reformatted
identically.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XML parser for consoles sets the 'port=' attribute of '<target' to
be always the index of the console.
Thus when the "really crazy backcompat stuff for consoles" function
modifies the order of consoles by inserting the default one for a serial
port it must re-number the ports to ensure that the value will not
change on subsequent parse.
This luckily didn't cause any visible changes to the VM as the port
number isn't used for anything.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assigning a PCI address needs to also assign any extension addresses
right away. Otherwise they'd be assigned only after subsequent
format->parse cycle and thus be potentially missing on first run after
defining the VM and thus could change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'size' of a 'shmem' device is parsed and formatted as a "scaled"
value, stored in bytes, but the formatting scale is mebibytes. This
precission loss combined with the fact that the value was validated only
when starting and the size is formatted only when non-zero meant that
on first parse a value < 1 MiB would be accepted, but would be formatted
to the XML as 0 MiB as it was non-zero but truncated and a subsequent
parse would parse of such XML would parse it as 0 bytes, which in turn
would be interpreted as 'default' size.
Fix the issue by moving the validator, which ensures that the number is
a power of two and more than 1 MiB to the validator code so that it'll
be rejected at XML parsing time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to auto-adding of controllers, the assignment of indexes can
cause them to be considered in different ordering according to the logic
in 'virDomainControllerInsert' than they currently are.
To prevent changes in commandline between first run after defining a VM
xml and any subsequent run or restart of the daemon, we need to reorder
them when assigning the index.
The simplest method is to assign indexes and then create a new list of
controllers and re-instert them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainDefAddController' which is used in code-paths which auto-add
controllers to the definition such as 'virDomainDefMaybeAddController',
'virDomainDefAddUSBController', 'qemuDomainDefAddDefaultDevices' was
adding the controller at the end of the list. However that is not how
the XML parser would order the controller in the list as it uses
virDomainControllerInsert grouping them by type and additional
properties.
This would cause that auto-added controllers would re-order:
- between first and any subsequent run of the VM (even on commandline)
- after a libvirtd/virtqemud restart
- after any update of the definition based on the 'define' operation
(e.g. virsh edit)
To ensure that the ordering of controllers is identical always use
virDomainControllerInsert.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format the code the usual way despite having more than 80 columns so
that it's easier to read.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since this tests inactive/config XML files rename it accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't special-case qemuxml2argvtest's handling of timeout but rather
allow each test array entry to have it's own.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is an intermediate step to merge qemuxml2xmltest into this common
helper. This eliminates double setup/parsing of the input data as well
as will ensure that all input XMLs are tested both for ARGV as well as
XML output. For now we skip tests that don't have an output XML to show
that the this does everything that qemuxml2xmltest does.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Get clean separation between the parsing and argv conversion so that
it's obvious in the test output:
2409) QEMU XML def parse s390-async-teardown.s390x-6.0.0 ... libvirt: QEMU Driver error : unsupported configuration: asynchronous teardown is not available with this QEMU binary
OK
2410) QEMU XML def -> ARGV s390-async-teardown.s390x-6.0.0 ... SKIP
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the common setup and parsing of the input XML into a separate
helper testQemuConfXMLCommon(). The helper has semantics which will
allow us to call it from multiple places so that VIR_TEST_RANGE will
still work properly even when we'll add multiple steps reusing the
prepared data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the setup of the fake driver from testCompareXMLToArgv to 'mymain'.
With this we also won't need to reset the fake drivers which was done
only partially.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As we don't do any additional parsing of the input file in
qemuxml2argvtest we can simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prior to all tests being converted to "DO_TEST_CAPS*" invocation the
fake-caps tests required knowing the architecture, which was pre-parsed
in qemuxml2argvtest. This code was now removed, but the arch parser was
forgotten.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainDefFormatInternalSetRootName' which is the top level XML
formatter function has the following condition as the very first thing:
if (def->id == -1)
flags |= VIR_DOMAIN_DEF_FORMAT_INACTIVE;
This makes it pointless to separately do inactive->active and
inactive->inactive XML -> XML testing as both will be in the end treated
as inactive->inactive.
This patch adds a warning to virDomainDefFormatInternalSetRootName and
removes the second pointless invocation of the test from
qemuxml2xmtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Neither qemuxml2argvtest nor qemuxml2xmltest now test configs parsed as
active, thus this flag is no longer needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In previous patches we've added testing of XML's explicitly parsed as
active (ensuring that it e.g. has a domain id) formatted into both
active and inactive versions.
Now qemuxml2xmltest can be simplified by making it test only XMLs parsed
as inactive.
To do this we pass VIR_DOMAIN_DEF_PARSE_INACTIVE in parseFlags. This
will also cause that all output files will become identical so the setup
of the test cases can be simplified by using the non-split output file
name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add explicit test cases for XMLs from qemuxml2argvdata which
historically had different output in qemuxml2xmltest.
qemuxmlactivetest explicitly ensures that the input XMLs are parsed in
'live' state and formatted both in inactive as well as live state,
rather than the previously present inactive->inactive, live->live tests
only.
The XMLs picked in this case are those which had separate output files
in qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the xml->xml testing we have in qemuxml2xmltest covers only 3
of the 4 possibilities:
By invocation:
active -> active;
inactive -> inactive;
by unintentionally:
active -> inactive (for configs which don't set an 'id' as the
formatter assumes it's inactive)
To do it better introduce proper active -> inactive/active testing into
qemuxmlactivetest. It's chosen such as we only really parse an XML as
live when restoring a status XML. To give users possibility to avoid
constructing a full status XML add a simpler variant. As of such it will
be used only for configs where we specifically cared about parsing live
data.
To ensure that the formatter doesn't decide that a config is inactive
because it doesn't have an ID we fill in a domain ID if it was not
present in the source.
In this patch the tests are not yet added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the code so that the test macros invoke a helper function with
no additional steps. This change prevents regressions in compilation
time when adding extra steps for the tests, which happen when the test
macro gets too complicated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The typedef will come in handy to create an autoptr cleaning function
later on.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test will be testing both status XMLs and active XMLs. Rename it to
a shorter name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Get rid of the extra temporary variable and set the parse and format
flags based on liveness together.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The main idea of the test is to validate config when PCIe is compiled
out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Index is auto-allocated normally. Additionally we now don't need the
extra active/inactive version of this test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case requires an exception in virschematest as the output file
is no longer invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The exception is needed in qemuxml2xmltest which is in one instance
testing update from an invalid config to a valid one. Currently the
compliance with the test is achieved via a hack.
As further patches will be simpler without the hack present we need a
way to invert the expected output in specific cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>