We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This information will be used to select, and store in the guest
configuration in order to guarantee ABI stability, the concrete
(hypervisor-specific) model for serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add support for describing NUMA distances in a domain's <numa> <cell>
XML description.
Below is an example of a 4 node setup:
<cpu>
<numa>
<cell id='0' cpus='0-3' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='10'/>
<sibling id='1' value='21'/>
<sibling id='2' value='31'/>
<sibling id='3' value='21'/>
</distances>
</cell>
<cell id='1' cpus='4-7' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='21'/>
<sibling id='1' value='10'/>
<sibling id='2' value='21'/>
<sibling id='3' value='31'/>
</distances>
</cell>
<cell id='2' cpus='8-11' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='31'/>
<sibling id='1' value='21'/>
<sibling id='2' value='10'/>
<sibling id='3' value='21'/>
</distances>
<cell id='3' cpus='12-15' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='21'/>
<sibling id='1' value='31'/>
<sibling id='2' value='21'/>
<sibling id='3' value='10'/>
</distances>
</cell>
</numa>
</cpu>
A <cell> defines a NUMA node. <distances> describes the NUMA distance
from the <cell> to the other NUMA nodes (the <sibling>s). For example,
in above XML description, the distance between NUMA node0 <cell id='0'
...> and NUMA node2 <sibling id='2' ...> is 31.
Valid distance values are '10 <= value <= 255'. A distance value of 10
represents the distance to the node itself. A distance value of 20
represents the default value for remote nodes but other values are
possible depending on the physical topology of the system.
When distances are not fully described, any missing sibling distance
values will default to 10 for local nodes and 20 for remote nodes.
If distance is given for A -> B, then we default B -> A to the same
value instead of 20.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
Index will remain an internal property even if we allow backing store
parsing from the XML, so we need to allow backing store without it in
the schema.
https://bugzilla.redhat.com/show_bug.cgi?id=1475250
It's possible to define and start a pool with a '.' in the
name; however, when trying to add a volume to a domain using
the storage pool source with a '.' in the storage pool name,
the domain RNG validation fails because RNG uses 'genericName'
which does not allow a '.' in the name.
Domain XML def parsing has a virXMLValidateAgainstSchema which
generates the error. The Storage Pool XML def parsing has no
call to virXMLValidateAgainstSchema. The only Storage Pool name
validation occurs in virStoragePoolDefParseXML to ensure the
name doesn't have a '/' in it and in storagePoolDefineXML to
call virXMLCheckIllegalChars using the same parameter "\n" as
qemuDomainDefineXMLFlags would check after the RNG check
could be succesful.
In order to resolve this, create a poolName definition in
storagecommon.rng that will mimic the domain name regex that
disallows a newline character, but add the "/" in the exclude
list. Then modify the pool and volume source name definitions
to key off that poolName.
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.
Sample XML for a VxHS disk:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.
Update the qemuxml2xmltest in order to add a test to show the proper
parsing.
Also update the docs to describe the tls attribute.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit edaf4ebe95.
This uses "reconnect" as attribute for <source> element, but we already
have a <reconnect> element for <source> element for chardev devices.
Since this is the same feature for different device it should be
presented in XML the same way.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashed or restart, QEMU shoule be reconnect to OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Alter the schema to allow a VxHS block device. Sample XML is:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
<serial>eb90327c-8302-4725-9e1b-4e85ed4dc251</serial>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
Update the html docs to describe the capability for VxHS.
Alter the qemuxml2xmltest to validate the formatting.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Some elements are offset just one space compared to their parent,
some are misaligned completely, and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
/domain/devices/disk/driver/@name is not a required or mandatory
attribute according to formatdomain, and indeed it was agreed on
IRC that the attribute is "optional for input, recommended (but
not required) for output". Currently the schema requires the
attribute, causing virt-xml-validate to fail on disk config where
the driver name is not explicitly specified. E.g.
# cat test.xml | grep -A 5 cdrom
<disk type='file' device='cdrom'>
<driver type='raw'/>
<target dev='hdb' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
# virt-xml-validate test.xml
Relax-NG validity error : Extra element devices in interleave
test.xml:21: element devices: Relax-NG validity error : Element domain failed to validate content
test.xml fails to validate
Relaxing the name attribute to be optional fixes the validation
# virt-xml-validate test.xml
test.xml validates
Adding it to the virDomainControllerPCIModelName enumeration
is enough for existing code to handle it, so parsing and
formatting will work without further tweaking.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Users may want to run the init command of a container as a special
user / group. This is achieved by adding <inituser> and <initgroup>
elements. Note that the user can either provide a name or an ID to
specify the user / group to be used.
This commit also fixes a side effect of being able to run the command
as a non-root user: the user needs rights on the tty to allow shell
job control.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Some containers may want the application to run in a special directory.
Add <initdir> element in the domain configuration to handle this case
and use it in the lxc driver.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
When running an application container, setting environment variables
could be important.
The newly introduced <initenv> tag in domain configuration will allow
setting environment variables to the init program.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Add support for vgaconf driver configuration. In domain xml it looks like
this:
<video>
<driver vgaconf='io|on|off'>
<model .../>
</video>
It was added with bhyve gop video in mind to allow users control how the
video device is exposed to the guest, specifically, how VGA I/O is
handled.
One can refer to the bhyve manual page to get more detailed description
of the possible VGA configuration options:
https://www.freebsd.org/cgi/man.cgi?query=bhyve&manpath=FreeBSD+12-current
The relevant part could be found using the 'vgaconf' keyword.
Also, add some tests for this new feature.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Update the per device boot schema to add an optional loadparm parameter.
eg: <boot order='1' loadparm='2'/>
Extend the virDomainDeviceInfo to support loadparm option.
Modify the appropriate functions to parse loadparm from boot device xml.
Add the xml2xml test to validate the field.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
On some platforms the number of bits in the cbm_mask might not be
divisible by 4 (and not even by 2), so we need to properly count the
bits. Similar file, min_cbm_bits, is properly parsed and used, but if
the number is greater than one, we lose the information about
granularity when reporting the data in capabilities. For that matter
always report granularity, but if it is not the same as the minimum,
add that information in there as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The following patches will add an actual content in the cookie and use
the data when restoring a domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Similar to scsi_host and fc_host, there is a relation between a
scsi_target and its transport specific fc_remote_port. Let's expose this
relation and relevant information behind it.
An example for a virsh nodedev-dumpxml:
virsh # nodedev-dumpxml scsi_target0_0_0
<device>
<name>scsi_target0_0_0</name>
<path>/sys/devices/[...]/host0/rport-0:0-0/target0:0:0</path>
<parent>scsi_host0</parent>
<capability type='scsi_target'>
<target>target0:0:0</target>
<capability type='fc_remote_port'>
<rport>rport-0:0-0</rport>
<wwpn>0x9d73bc45f0e21a86</wwpn>
</capability>
</capability>
</device>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Make CCW devices available to the node_device driver. The devices are
already seen by udev so let's implement necessary code for detecting
them properly.
Topologically, CCW devices are similar to PCI devices, e.g.:
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Start discovering the mediated devices on the host system and format the
attributes for the mediated device into the XML. Compared to the parent
device which reports generic information about the abstract mediated
devices types, a child device only reports the type name it has been
instantiated from and the IOMMU group number, since that's device
specific compared to the rest of the info that can be gathered about
mediated devices at the moment.
This patch introduces both the formatting and parsing routines, updates
nodedev.rng schema, adding a testcase as well.
The resulting mdev child device XML:
<device>
<name>mdev_4b20d080_1b54_4048_85b3_a6a62d165c01</name>
<path>/sys/devices/.../4b20d080-1b54-4048-85b3-a6a62d165c01</path>
<parent>pci_0000_06_00_0</parent>
<driver>
<name>vfio_mdev</name>
</driver>
<capability type='mdev'>
<type id='vendor_supplied_type_id'/>
<iommuGroup number='NUM'/>
<capability/>
<device/>
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The parent device needs to report the generic stuff about the supported
mediated devices types, like device API, available instances, type name,
etc. Therefore this patch introduces a new nested capability element of
type 'mdev_types' with the resulting XML of the following format:
<device>
...
<capability type='pci'>
...
<capability type='mdev_types'>
<type id='vendor_supplied_id'>
<name>optional_vendor_supplied_codename</name>
<deviceAPI>vfio-pci</deviceAPI>
<availableInstances>NUM</availableInstances>
</type>
...
<type>
...
</type>
</capability>
</capability>
...
</device>
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add a new <ioapic> element with a driver attribute.
Possible values are qemu and kvm. With 'qemu', the I/O
APIC can be put in the userspace even for KVM domains.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
We're only adding only info about L3 caches, we can add more
later (just by changing one line), but for now that's more than enough
without overwhelming anyone.
XML snippet of how this should look like (also seen as part of the commit):
<cache>
<bank id='0' level='3' type='both' size='8192' unit='KiB' cpus='0-7'/>
</cache>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Make the schema more strict for HTTP disks requiring a name and
mandating exactly one source host.
ftp/tftp entries were not moved here, since http transport also will
support cookies and other options, which will be added later.
This patch introduces
<cache level='N' mode='emulate'/>
<cache mode='passthrough'/>
<cache mode='disable'/>
sub element of /domain/cpu. Currently only a single <cache> element is
allowed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us. The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>. And in
those cases the guest can modify the settings itself.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
docs/schemas directory is meant for schemas which are installed on the
system. The schema for the news file does not need to be installed.
Store it along with the file it describes for simplicity.
Creating dummy <change> elements was a workaround for the
HTML DTD not allowing empty <ul> elements, but we can do
better by tweaking the the XSLT stylesheet.
Pool types that have the VIR_STORAGE_POOL_SOURCE_NAME flag set
allow omitting the <name> element and instead fill out the pool name
from the <source><name> element.
Relax the schema to make <name> optional for these pools.
Expressing that at least one of these is required is out of scope
of the schema.
This brings the libvirt version of this RNG file in line with the same
file in netcf (as soon as the corresponding patch there is ACKed and
pushed).
There's no reason to require it when defining an interface (the config
option it corresponds to is optional), and it isn't even output in the
status of an interface.
Resolves: https://bugzilla.redhat.com/1414404
A mediated device will be identified by a UUID (with 'model' now being
a mandatory <hostdev> attribute to represent the mediated device API) of
the user pre-created mediated device. We also need to make sure that if
user explicitly provides a guest address for a mdev device, the address
type will be matching the device API supported on that specific mediated
device and error out with an incorrect XML message.
The resulting device XML:
<devices>
<hostdev mode='subsystem' type='mdev' model='vfio-pci'>
<source>
<address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'>
</source>
</hostdev>
</devices>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The attribute can be used to request a specific way of checking whether
the virtual CPU matches created by the hypervisor matches the
specification in domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU 2.9 introduces the pcie-root-port device, which is
a generic version of the existing ioh3420 device.
Make the new device available to libvirt users.
For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.
Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.
At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:
<memory model='nvdimm'>
<source>
<path>/tmp/nvdimm</path>
</source>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
<address type='dimm' slot='0'/>
</memory>
So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.
For more info on NVDIMM visit the following web page:
http://pmem.io/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
bhyve supports 'gop' video device that allows clients to connect
to VMs using VNC clients. This commit adds support for that to
the bhyve driver:
- Introducr 'gop' video device type
- Add capabilities probing for the 'fbuf' device that's
responsible for graphics
- Update command builder routines to let users configure
domain's VNC via gop graphics.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
With that users could access files outside /dev/shm. That itself
isn't a security problem, but might cause some errors we want to
avoid. So let's forbid slashes as we do with domain and volume names
and also mention that in the schema.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1395496
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add a new attribute 'rendernode' to <gl> spice element.
Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new 'drm' capability for Direct Rendering Manager (DRM) devices,
providing device type information.
Teach the udev backend to populate those devices.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add new <devnode> top-level <device> element, that list the associated
/dev files. Distinguish the main /dev name from symlinks with a 'type'
attribute of value 'dev' or 'symlink'.
Update a test to check XML schema, and actually add it to the test list
since it was missing.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This part introduces new xml elements for file based
memorybacking support and their parsing.
(It allows vhost-user to be used without hugepages.)
New xml elements:
<memoryBacking>
<source type="file|anonymous"/>
<access mode="shared|private"/>
<allocation mode="immediate|ondemand"/>
</memoryBacking>
Example:
<network>
...
<mtu size='9000'/>
...
If mtu is unset, it's assumed that we want the default for whatever is
the underlying transport (usually this is 1500).
This setting isn't yet wired in, so it will have no effect.
This partially resolves: https://bugzilla.redhat.com/1224348
So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
fabric_name is one of many fc_host attributes in Linux that is optional
and left to the low-level driver to decide if it is implemented.
The zfcp device driver does not provide a fabric name for an fcp host.
This patch removes the requirement for a fabric name by making it optional.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Add new fields to the fchost structure to allow creation of a vHBA via
the storage pool when a parent_wwnn/parent_wwpn or parent_fabric_wwn is
supplied in the storage pool XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1349696
When creating a vHBA, the process is to feed XML to nodeDeviceCreateXML
that lists the <parent> scsi_hostX to use to create the vHBA. However,
between reboots, it's possible that the <parent> changes its scsi_hostX
to scsi_hostY and saved XML to perform the creation will either fail or
create a vHBA using the wrong parent.
So add the ability to provide "wwnn" and "wwpn" or "fabric_wwn" to
the <parent> instead of a name of the scsi_hostN that is the parent.
The allowed XML will thus be:
<parent>scsi_host3</parent> (current)
or
<parent wwnn='$WWNN' wwpn='$WWPN'/>
or
<parent fabric_wwn='$WWNN'/>
Using the wwnn/wwpn or fabric_wwn ensures the same 'scsi_hostN' is
selected between hardware reconfigs or host reboots. The fabric_wwn
Using the wwnn/wwpn pair will provide the most specific search option,
while fabric_wwn will at least ensure usage of the same SAN, but maybe
not the same scsi_hostN.
This patch will add the new fields to the nodedev.rng for input purposes
only since the input XML is essentially thrown away, no need to Format
the values since they'd already be printed as part of the scsi_host
data block.
New API virNodeDeviceGetParentHostByWWNs will take the parent "wwnn" and
"wwpn" in order to search the list of devices for matching capability
data fields wwnn and wwpn.
New API virNodeDeviceGetParentHostByFabricWWN will take the parent "fabric_wwn"
in order to search the list of devices for matching capability data field
fabric_wwn.
Similarly to localOnly DNS domain, localPtr attribute can be used to
tell the DNS server not to forward reverse lookups for unknown IPs which
belong to the virtual network.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
