Most people will want to use isa-debugcon to obtain debug output
for SeaBIOS / EDK II, so let's include a ready-made example for
that scenario in our documentation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virCHMonitorGetIOThreads returns an int, not size_t.
Also return early if it's negative, because promoting it to
an unsigned type in the for loop condition could lead to
an infinte loop.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Report an error upfront if the binary does not exist
or is not executable.
https://bugzilla.redhat.com/show_bug.cgi?id=1999372
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Some files do not include what they use and rely on virutil.h
to pull in the necessary header files.
Fix it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The current implementation of the workaround for yajl's broken
pkg-config file accidentally overwrites the value of includedir
that is later used by the installation process. Rename the
local variable to avoid this issue.
Fixes: c97075e1e4
Closes: https://gitlab.com/libvirt/libvirt/-/issues/271
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The XML-to-XML test validates that we don't accidentally copy the
isa-debug <serial> into a <console>.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce support for
<serial type='pty'>
<target type='isa-debug'>
<model type='isa-debugcon'/>
</target>
<address type='isa' iobase='0x402'/>
</console>
which is used as a way to receive debug messages from the
firmware on x86 platforms.
Note that the default port is hypervisor specific, with QEMU
currently using 0xe9 since that's the original Bochs debug port.
For use with SeaBIOS/OVMF, the iobase port needs to be explicitly
set to 0x402.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The serial port model cannot be allowed to change across migration
as it affects ABI.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When virNodeDeviceObjListRemove() is called, the passed
virNodeDeviceObj is removed from internal list of node devices
and then unrefed and unlocked. While the former is warranted (the
object was refed at the beginning of the function) the unlock is
not. In fact, it's wrong from conceptual POV. We still want
threads working on the object tu mutually exclude each other.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is a perfectly valid configuration that we need to keep
working, so add test coverage for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This mostly overlaps with virDomainAudioType, but in a couple of
cases the string representations are different.
Right now we're doing that in a somewhat sketchy way, in that we
store values of one enumeration and then convert them to strings
using TypeToString() implementation for the other enumeration;
when converting from string, we open-code the handling of the
special values mentioned above.
Drop the second enumeration and introduce two helpers to deal
with conversion. Most calling sites don't need to be changed, and
one can even be simplified significantly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This, along with "pa", is the other case where the libvirt and
QEMU names do not match.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We recently started listing these in the spec file and, since we
were not creating them during the installation phase, that broke
RPM builds.
Fixes: 4b43da0bff
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, memory device (def->mems) part of cmd line is
generated before any controller. In majority of cases it doesn't
matter because neither of memory devices live on a bus that's
created by an exposed controller (e.g. there's no DIMM
controller, at least not exposed). Except for virtio-mem and
virtio-pmem, which do have a PCI address. And if it so happens
that the device goes onto non-default bus (pci.0) starting such
guest fails, because the controller that creates the desired bus
wasn't processed yet. QEMU processes arguments in order.
For instance, if virtio-mem has address with bus='0x01' QEMU
refuses to start with the following message:
Bus 'pci.1' not found
Similarly for virtio-pmem. I've successfully tested migration and
changing the order does not affect migration stream.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2047271
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This has two advantages: it makes it possible for the admin to
ask rpm what package they belong to, and results in them ending
up with stricter permissions than they would have if we let
libvirt create them at runtime.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The server, not the client, uses local storage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Files like libvirt.conf influence the behavior of the library
itself. The daemon depends on the library, so the directory is
guaranteed to be present both on the client side and on the
server side.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
MIPS Malta (and no other supported MIPS machine) has a PCI bus.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This identifies various MIPS Malta machines, be it 32-bit or 64-bit,
little-endian or big-endian.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Identifies all of various MIPS sub-architectures: 32-bit or 64-bit,
little-endian or big-endian.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are few places where the g_steal_pointer() is open coded.
Switch them to calling the g_steal_pointer() function instead.
Generated by the following spatch:
@ rule1 @
expression a, b;
@@
<...
- b = a;
... when != b
- a = NULL;
+ b = g_steal_pointer(&a);
...>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Inside the testPCIVPDResourceCustomCompareIndex() function we
have two variables @a and @b, both marked as g_autoptr(). Then,
towards the end of the function b->value is freed and set to
a->value. This is to make sure
virPCIVPDResourceCustomCompareIndex() works correctly even if
->value member is the same for both arguments.
Nevertheless, if the function returns anything else than 0 then
the control executes subsequent return statement and since
b->value points to the very same string as a->value a double free
will occur. Avoid this by setting b->value to NULL explicitly,
just like we are already doing for the successful path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are a few places where a variable is VIR_FREE()-d and then
explicitly set to NULL. This is not necessary since VIR_FREE()
does that for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In testDomainSetBlockIoTune() the info.group_name is strdup()-ed
and just after the whole @info structure is passed to
virDomainDiskSetBlockIOTune() the @group_name member is set to
NULL. This creates a memleak, because
virDomainDiskSetBlockIOTune() creates its own copy of the string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The meson version provided by the package managing system satisfies our
minimum requirement.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Modeled after "WITH_QEMU_LOCK_GUARD" (see qemu's include/qemu/lockable.h).
See comment for typical usage.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Typical usage:
void foobar(virObjectLockable *obj)
{
VIR_LOCK_GUARD lock = virObjectLockGuard(obj);
/* `obj` is locked, and released automatically on scope exit */
...
}
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Modeled after "WITH_QEMU_LOCK_GUARD" (see qemu's include/qemu/lockable.h).
See comment for typical usage.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Locks a virMutex on creation and unlocks it in its destructor.
The VIR_LOCK_GUARD macro is used instead of "g_auto(virLockGuard)" to
work around a clang issue (see https://bugs.llvm.org/show_bug.cgi?id=3888
and https://bugs.llvm.org/show_bug.cgi?id=43482).
Typical usage:
void function(virMutex *m)
{
VIR_LOCK_GUARD lock = virLockGuardLock(m);
/* `m` is locked, and released automatically on scope exit */
...
while (expression) {
VIR_LOCK_GUARD lock2 = virLockGuardLock(...);
/* similar */
}
}
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Using the two-step idiom to force resolution of other macros, e.g.:
#define bar BAR
CONCAT_(foo, bar) // foobar
CONCAT(foo, bar) // fooBAR
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The service files were copied out of the service file for libvirtd and
the name of the corresponding manpage was not fixed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2045959
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Outline information commonly logged which users could consider
sensitive.
Add a note that VNC/SPICE passwords are logged in plaintext.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The idea behind virNWFilterBindingObjNew() is to create and
return an object of virNWFilterBindingObjClass class. The class
is virObjectLockable (and the corresponding
_virNWFilterBindingObj structure has virObjectLockable parent).
But for some reason plain virObjectNew() is called. This is wrong
because the mutex in the parent is left uninitialized.
Next, the returned object is not locked. This is wrong because in
some cases the returned object is added onto a list of bindings
and then passed to virNWFilterBindingObjEndAPI() which unlocks it
right away. This is potentially dangerous because we might just
have unlocked the object for another thread.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in Xen 4.7 by commit:
commit bf7628f087b212052a0e9f024044b2790c33f820
libxl: add pvusb API
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unused as of:
commit 446d091498
libxl: pass driver config to libxlMakeDomBuildInfo
All other usage of LIBXL_HAVE_DEVICE_CHANNEL was removed by:
commit e58004d70a
Xen: Remove unneeded LIBXL_HAVE_* ifdefs
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
