Commit Graph

2134 Commits

Author SHA1 Message Date
Daniel P. Berrangé
278659fff6 virsh: add nwfilter binding commands
$ virsh nwfilter-binding-list
 Port Dev                              Filter
------------------------------------------------------------------
 vnet0                 clean-traffic
 vnet1                 clean-traffic

$ virsh nwfilter-binding-dumpxml vnet1
<filterbinding>
  <owner>
    <name>f25arm7</name>
    <uuid>12ac8b8c-4f23-4248-ae42-fdcd50c400fd</uuid>
  </owner>
  <portdev name='vnet1'/>
  <mac address='52:54:00:9d:81:b1'/>
  <filterref filter='clean-traffic'>
    <parameter name='MAC' value='52:54:00:9d:81:b1'/>
  </filterref>
</filterbinding>

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-06-26 11:22:07 +01:00
Chen Hanxiao
62c3919328 cmdDomblkinfo: add --all to show all block devices info
This patch introduces --all to show all block devices info
of guests like:

virsh # domblkinfo w08 --all
Target     Capacity        Allocation      Physical
---------------------------------------------------
hda        42949672960     9878110208      9878110208
vda        10737418240     10736439296     10737418240

Target     Capacity        Allocation      Physical
---------------------------------------------------
hda        40.000 GiB      9.200 GiB       9.200 GiB
vda        10.000 GiB      9.999 GiB       10.000 GiB

For inactive domains using networked storage, a "-" will
be printed instead of the value since it's not possible
to determine the value without the storage connection.

Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-06-21 17:39:22 -04:00
Chen Hanxiao
4afcaa8843 cmdDomblkinfo: introduce helper cmdDomblkinfoPrint
Introduce helper cmdDomblkinfoPrint for printing.

Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-06-21 17:39:19 -04:00
Michal Privoznik
9486ed9071 virsh: Introduce --nowait to domstats
This new switch can be used to set
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag for stats
fetching API.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-06-19 07:08:13 +02:00
Ján Tomko
4a6e17038b virsh: fix help for detach-disk --print-xml
The help message was copied from attach-interface.
Introduced by commit <431e736>.

https://bugzilla.redhat.com/show_bug.cgi?id=1588295

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-06-07 09:21:14 +02:00
ramyelkest
2b6667abbf all: Replace virGetLastError with virGetLastErrorCode where we can
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.

Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2018-06-05 18:44:05 +02:00
Jiri Denemark
6d27148ae1 virsh: Introduce new hypervisor-cpu-baseline command
This command is a virsh wrapper for virConnectBaselineHypervisorCPU.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-28 15:59:10 +02:00
Jiri Denemark
8c4ccf9d2e virsh: Introduce new hypervisor-cpu-compare command
This command is a virsh wrapper for virConnectCompareHypervisorCPU.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
2018-05-28 15:58:05 +02:00
Jiri Denemark
d0ff5ce43b vshExtractCPUDefXML: Accept domain capabilities XML
The domain capabilities XML contains host CPU model tailored to a
specific hypervisor and since it's enclosed in <mode name='host-model'>
element rather then the required <cpu> it's impossible to directly use
the host CPU model as an input to, e.g., cpu-compare command. To make
this more convenient, vshExtractCPUDefXML now accepts full domain
capabilities XML and automatically transforms the host CPU models into
the form accepted by libvirt APIs.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-28 15:54:10 +02:00
Jiri Denemark
ccbd59931f virsh: Enhance documentation of cpu-models command
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
2018-05-28 15:54:10 +02:00
Jiri Denemark
f510f893fe virsh: Enhance documentation of cpu-compare command
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-28 15:54:10 +02:00
Jiri Denemark
c84726fbdd virsh: Extract common code from cmdCPU{Compare,Baseline}
Both cpu-compare and cpu-baseline commands accept more that just CPU
definition XML(s). For users' convenience they are able to extract the
CPU definition(s) even from domain XML or capabilities XML. The main
differences between the two commands is in the number of CPU definitions
they expect: cpu-compare wants only one CPU definition while
cpu-baseline expects one or more CPUs.

The extracted code forms a new vshExtractCPUDefXML function.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-28 15:54:10 +02:00
Jiri Denemark
361989bd18 virsh: Move cpu-{baseline,compare} commands
Similarly to cpu-models these two commands do not operate on a domain
and should be listed in the "Host and Hypervisor" commands section.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-28 15:54:10 +02:00
Michal Privoznik
856fb16492 virsh: Expose virDomainDetachDeviceAlias
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-28 13:08:42 +02:00
Roland Schulz
c7151b0e4d tools: virsh: Add virshCellnoCompleter.
Signed-off-by: Roland Schulz <schullzroll@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-25 10:35:51 +02:00
Roland Schulz
6a58e3102b Fix indentation of virshAllocpagesPagesizeCompleter arguments.
Signed-off-by: Roland Schulz <schullzroll@gmail.com>
2018-05-24 15:56:29 +02:00
Roland Schulz
455a1a054b Add virshAllocpagesPagesizeCompleter to opts_freepages.
Signed-off-by: Roland Schulz <schullzroll@gmail.com>
2018-05-24 15:45:21 +02:00
Lin Ma
83f1e64dd3 virsh: Add event name completion to 'nodedev-event' command
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-24 15:26:10 +02:00
Lin Ma
a9f6b8fc8c virsh-nodedev: Rename and move vshEventCallback to virshNodedevEventCallback
The next patch will use it in virsh-completer.c for returning the name
list of nodedev events.

Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-24 15:26:10 +02:00
Lin Ma
cac6d413f9 virsh: Add event name completion to 'pool-event' command
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-24 15:26:10 +02:00
Lin Ma
237fe904e9 virsh-pool: Rename and move vshEventCallback to virshPoolEventCallback
The next patch will use it in virsh-completer.c for returning the name
list of pool events.

Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-24 15:26:02 +02:00
Lin Ma
66d6608148 virsh: Add event name completion to 'event' command
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-24 15:13:45 +02:00
Lin Ma
05642e8bd1 virsh: Move vshEventCallback structure definition to virsh-domain.h
The next patch will use it in virsh-completer.c for returning the
strings of domain event name. At the same time, rename it to
avoid possible name clashing.

Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-24 13:36:32 +02:00
Lin Ma
266965452a virsh: Add event name completion to 'secret-event' command
The patch code originally authored by Michal Privoznik, Please refer to
https://www.redhat.com/archives/libvir-list/2018-May/msg01022.html

Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-24 13:34:18 +02:00
Lin Ma
bee2331f2b virsh-secret: Rename vshEventCallback to virshSecretEventCallback
The next patch will use it in virsh-completer.c for returning the name
list of secret events.

The patch code originally authored by Michal Privoznik, Please refer to
https://www.redhat.com/archives/libvir-list/2018-May/msg01022.html

I splitted it to 2 patches with tiny change.

Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-24 13:32:25 +02:00
Roland Schulz
0babf84797 Fix memory leak issues in virshAllocpagesPagesizeCompleter.
Signed-off-by: Roland Schulz <schullzroll@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-23 15:27:40 +02:00
Roland Schulz
74e7c79066 Add NUMA support to virshAllocpagesPagesizeCompleter.
Signed-off-by: Roland Schulz <schullzroll@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-22 15:32:10 +02:00
Martin Kletzander
08e190fdda tools: Tiny clean-ups for two functions in virsh-completer.c
These two functions were duplicating some cleanup paths, so let's just merge
both cleanup and error paths together.  To distinguish whether we need to
clean-up the return value let's keep it in @tmp until the function is successful
in which case we set @ret to the value of @tmp and set @tmp to NULL.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-21 15:18:40 +02:00
Roland Schulz
3b90c3c463 Add virshAllocpagesPagesizeCompleter
Returns list of host page sizes from capabilities XML.

Signed-off-by: Roland Schulz <schullzroll@gmail.com>
2018-05-21 14:56:19 +02:00
Lin Ma
27e97d5c17 virsh: Add target name completion for block device options
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-17 17:06:11 +02:00
Lin Ma
14dd3b63e9 virsh: Introduce virshDomainDiskTargetCompleter
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-17 17:06:11 +02:00
Lin Ma
78809398df virsh-network: Add network name completion to 'net-uuid' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-17 17:06:11 +02:00
Lin Ma
c5a9e6a9ac virsh-network: Add macro VIRSH_COMMON_OPT_NETWORK_FULL
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-17 17:06:11 +02:00
Lin Ma
27631eac7a virsh-network: Add network name completion to 'net-event' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-17 17:06:11 +02:00
Lin Ma
de97d5600c virsh-network: Create macros for VSH_OT_STRING "network" option
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-17 17:06:11 +02:00
Lin Ma
a4bbd30400 virsh: Only return active domain names for block* command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-17 17:06:11 +02:00
Lin Ma
84d660607d virsh: Only return active domain names for 'reset' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-17 17:06:11 +02:00
Lin Ma
7c07067c1d virsh: Remove 'id' text from help message for 'domrename' command
The inactive domains don't have any ID identifier, So adjust the help
message.

Signed-off-by: Lin Ma <lma@suse.com>
2018-05-17 17:06:11 +02:00
Lin Ma
f33d02c11f virsh: Don't skip the first entry when the typed command share same prefix
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-11 13:13:22 +02:00
John Ferlan
4a3d6ed5ee util: Clean up consumers of virJSONValueArraySize
Rather than have virJSONValueArraySize return a -1 when the input
is not an array and then splat an error message, let's check for
an array before calling and then change the return to be a size_t
instead of ssize_t.

That means using the helper virJSONValueIsArray as well as using a
more generic error message such as "Malformed <something> array".
In some cases we can remove stack variables and when we cannot,
those variables should be size_t not ssize_t. Alter a few references
of if (!value) to be if (value == 0) instead as well.

Some callers can already assume an array is being worked on based
on the previous call, so there's less to do.

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-10 14:59:15 -04:00
Lin Ma
919bb45b56 virsh: Apply macro for current VSH_OT_ARGV "domain" options
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-10 10:01:15 +02:00
Lin Ma
90396d795a virsh: Create macros for VSH_OT_ARGV "domain" option
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-10 10:01:15 +02:00
Lin Ma
0d1c1a74b7 vshReadlineParse: Ignore vshReadlineOptionsGenerator for VSH_OT_ARGV options
Currently the VSH_OT_ARGV options don't support complete, But some of
VSH_OT_ARGV options are gonna support complete in upcoming patches.

Once applied the upcoming completion patches for VSH_OT_ARGV options, If
we don't ignore VSH_OT_ARGV here, The vshReadlineOptionsGenerator will
be called, Hence complete output will consist of the result by command
completer + the result by option completer, It's confusing.
e.g.
    $ virsh domstats --domain <TAB><TAB>
    --backing     --interface      --list-paused      --perf      --vcpu
    --balloon     leap42.3         --list-persistent  --raw       win10
    --block       --list-active    --list-running     sles12sp3
    --cpu-total   --list-inactive  --list-shutoff     sles15
    --enforce     --list-other     --list-transient   --state

After this patch and the upcoming completion patches:
    $ virsh domstats --domain <TAB><TAB>
    leap42.3    sles12sp3    sles15    win10

Signed-off-by: Lin Ma <lma@suse.com>
2018-05-10 10:01:15 +02:00
Lin Ma
ee6113aaea vshReadlineOptionsGenerator: Add already provided VSH_OT_ARGV options to list
It's helpful for users while they type certain kind of VSH_OT_ARGV options.
e.g.

$ virsh domstats --domain sles12sp3 --d<TAB>

Signed-off-by: Lin Ma <lma@suse.com>
2018-05-10 10:01:15 +02:00
Lin Ma
d86531daf2 virsh: Apply macro for current VSH_OT_STRING "domain" options
These VSH_OT_STRING "domain" options support domain name completion now.

Signed-off-by: Lin Ma <lma@suse.com>
2018-05-10 09:21:13 +02:00
Lin Ma
4be3b50dcc virsh: Create macros for VSH_OT_STRING "domain" option
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-10 09:21:04 +02:00
Lin Ma
55948988e8 virsh: Conditionally Ignore the first entry in list of completions
The first entry in the returned array is the substitution for TEXT. It
causes unnecessary output if other commands or options share the same
prefix, e.g.

$ virsh des<TAB><TAB>
des      desc     destroy

or

$ virsh domblklist --d<TAB><TAB>
--d        --details  --domain

This patch fixes the above issue.

Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-10 09:05:46 +02:00
Lin Ma
f3097dc8b6 virsh: Add domain name completion to 'migrate-postcopy' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-10 07:51:50 +02:00
Lin Ma
8379895227 virsh: Move the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
centralize the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
to avoid unnecessary duplicated definition

Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-10 07:51:37 +02:00
Lin Ma
fea03bd31d virsh: Simplify control flow for 'qemu-agent-command' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-04 12:46:22 +02:00
Lin Ma
b9e3c8c5c0 virsh: Simplify control flow for 'desc' command
Just like the commit 8941c800, It does the similar thing.

Signed-off-by: Lin Ma <lma@suse.com>
2018-05-04 12:46:22 +02:00
Lin Ma
2273e408d9 virsh: Error out while domain not found for 'event' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-04 12:46:22 +02:00
Lin Ma
b925e6625c virsh: Error out while domain not found for 'qemu-monitor-event' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-04 12:46:22 +02:00
Daniel P. Berrangé
078c80b6e7 virsh: remove left over print statement wrt Xen driver
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-24 16:59:21 +01:00
Christian Ehrhardt
cce57265c4 tools: do not report unknown guests in print_guests_shutdown
If another event in background while running libvirt-guests.sh
completely undefines a guest it will no more be available for proper
reporting of its shutdown.

This appears in the log as:
  Failed to determint state of guest: <UUID>. Not tracking it anymore
  Shutdown of guest  complete

The first message already reports that we are giving up on the guest
(per UUID which is all we have left at that point). To avoid the message
with an empty guest_name in such a case lets check what guest_name
returned and only print a report on valid content.

Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Dariusz Gadomski <dariusz.gadomski@canonical.com>
2018-04-24 10:46:41 +02:00
Christian Ehrhardt
08bb5eeba7 tools: fix check_guests_shutdown loop
The recent fix to libvirt-guests.sh.in works for what it intended to fix
(variable scope) but failed to adapt the loop in check_guests_shutdown
correctly. Due to that it currently might detect all guests as "Failed to
determine state of guest" by bad var content or just assumes they are shut
down by picking up an empty variable.

This commit fixes loop to use the passed value and the call in the loop
to actually use the variable assigned in the iterated.

Fixes: 7e476356 "tools: fix variable scope in in check_guests_shutdown"
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1764668

Reviewed-by: Dariusz Gadomski <dariusz.gadomski@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-04-24 10:43:42 +02:00
Daniel P. Berrangé
c0a8ea450d po: provide custom make rules for po file management
Historically we have relied on autopoint/gettextize to install a
standard po/Makefile.in.in. There is very limited scope for customizing
this and it also causes a bunch of extra stuff to be pulled into
configure.ac which potentially clashes with gnulib. Writing make rules
for po file management is no more difficult than any other rules libvirt
has, so stop using autopoint/gettextize.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 10:35:58 +01:00
John Ferlan
0d6e834103 virsh: Clear vsh last error during virshCommandOptVolBy
https://bugzilla.redhat.com/show_bug.cgi?id=1529256

If one of the virStorageVolLookupBy{Key|Name|Path} succeeds and
we have a @vol, then clear the last libvirt error; otherwise, a
subsequent "other" failure may cause vshReportError to erroneously
report the wrong error as well as a reported 'vshError' error that
caused the failure.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-04-17 11:19:13 -04:00
Daniel P. Berrangé
a2fd657b86 lxc: allow use of lxc:///system URI as preferred format
Historically we have used a bare lxc:/// URI for connecting to LXC. This
is different from our practice with QEMU, UML, Parallels, Libxl, BHyve
and VirtualBox drivers, which all use a path of '/system' or '/session'
or both.

By making LXC allow '/system', we have fully standardized on the use of
either '/system' or '/session' for all the stateful drivers that run
inside libvirtd.

Support for lxc:/// is of course maintained for back-compat.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-12 16:52:01 +01:00
Daniel P. Berrangé
a8ea89d258 xen: encourage use of xen:///system URI as preferred format
Historically we have used a bare xen:/// URI for connecting to the
legacy Xen driver. The new libxl Xen driver follows the new practice
of allowing '/system' as a path, as well as bare '/' for compat with
the old Xen driver.

This documents xen:///system as the preferred format for Xen, leaving
xen:/// as an undocumented feature just for back-compat.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-12 16:52:01 +01:00
Chen Hanxiao
c595fc788e virsh: add missing help info of --source to domifaddr
commit b4b5c82ce forgot to add this.

Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
2018-03-29 13:29:49 -04:00
Christian Ehrhardt
7e476356c2 tools: fix variable scope in in check_guests_shutdown
libvirt-guests.sh when run with more active guests than requested to
shut down in parallel will run until it times out only shutting down
the first set of guests.

This patch fixes parallel shutdown by fixing a variable scope issue
where check_guests_shutdown unintentionally reset $guests which
prevented further progress.

Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1688508

Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
2018-03-19 13:06:03 +01:00
John Ferlan
ddbee9f82a tools: Clean up the vol-resize man page
Instead of appearing as one long paragraph, split the output to list
each command option on its own line for better readability.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-15 17:11:42 -04:00
John Ferlan
464f6ee3ff virsh: Fix man page argument ordering for vol-{path|name|key} commands
The proper command order is 'virsh vol-path volume pool', or
'virsh vol-name volume pool', or 'virsh vol-key volume'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-15 17:11:41 -04:00
John Ferlan
031ef3d8b0 virsh: Clean up man page formatting for vol-list and vol-pool
Make the output more readable.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-15 17:11:40 -04:00
John Ferlan
216efc893f virsh: Fix man page argument ordering for vol-info command
The proper command order is 'virsh vol-info volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-15 17:11:39 -04:00
John Ferlan
e3836b349c virsh: Fix man page argument ordering for vol-dumpxml command
The proper command order is 'virsh vol-dumpxml volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-15 17:11:38 -04:00
John Ferlan
442f8b44c2 virsh: Fix man page argument ordering for vol-wipe command
The proper command order is 'virsh vol-wipe volume pool algorithm'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-15 17:11:37 -04:00
John Ferlan
3bf2f7607c virsh: Fix man page argument ordering for vol-download command
The proper command order is 'virsh vol-download volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-15 17:11:35 -04:00
John Ferlan
924c70552f virsh: Fix man page argument ordering for vol-upload command
The proper command order is 'virsh vol-upload volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-15 17:11:34 -04:00
John Ferlan
3183f5ad30 virsh: Fix man page argument ordering for vol-delete command
The proper command order is 'virsh vol-delete volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-15 17:11:33 -04:00
John Ferlan
4e98d2bb79 virsh: Fix man page argument ordering for vol-clone command
The proper command order is 'virsh vol-clone source-vol target-vol pool'.
While making the modification clean up the description a bit too in
order to help clarify under what circumstances the source-vol could be
found if the pool name was not provided.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-15 17:11:32 -04:00
John Ferlan
f0b806e0de virsh: Clean up formatting of the vol-create* commands
Clean up the formatting to make the output a bit more readable at
least with respect to not having one paragraph of output. Each
option will start on its own line.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-15 17:11:30 -04:00
Chen Hanxiao
b4b5c82ce8 virsh: add --source arp to domifaddr
We can use:
  domifaddr f26-cloud --source arp
to get the address.

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
2018-03-15 11:22:42 +01:00
Andrea Bolognani
ea9b0e580a keycodemapdb: Update submodule
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-12 16:30:49 +01:00
John Ferlan
d45bee449c tools: Add support for additional adapter parent options
Add the ability to provide the adapter parent_wwnn and parent_wwpn
or the parent_fabric_wwn on the virsh command line for the pool
define/create as commands.  Update the virsh.pod description.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-12 09:00:37 -04:00
John Ferlan
8d2247dfd1 tools: Update the help description of the adapter-parent field
One short sentence won't do it justice, but it could help by listing
scsi_hostN and vHBA to point one in the right direction.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-12 09:00:32 -04:00
John Ferlan
3d79246888 tools: Add the wwnn/wwpn to the man page for storage pool fields
The description was missing the wwnn and wwpn names for the
--adapter-wwnn and --adapter-wwpn switches. Just add it to be
clear that the fields cannot be empty (IOW they are not boolean).

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-03-12 09:00:09 -04:00
Ján Tomko
39a6df5334 virsh: use logical or for boolean values
Bitwise or just looks wrong here.
Introduced by <commit 69e0cd3>.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-03-08 16:51:39 +01:00
Ján Tomko
8a4559c1aa virsh-edit: remove unreachable break
Introduced by <commit 1bb1de8>.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-03-08 16:51:31 +01:00
Jan Palus
43523d7421 make sure libvirt is linked first
so it's not affected by flags that might be passed in $(*_LIBS) like
-L/usr/lib which might result in linking against system library and
requiring incorrect version of private symbols

Signed-off-by: Jan Palus <atler@pld-linux.org>
2018-03-05 16:49:50 +00:00
Michal Privoznik
846d3b5874 vshCommandOpt: Do more checking if skipChecks is set
Currently if cmd->skipChecks is set (done only from completers)
some basic checks are skipped because we're working over
partially parsed command. See a26ff63ae4 for more detailed
explanation. Anyway, the referenced commit was too aggressive in
disabling checks and effectively returned success even in clear
case of failure. For instance:

  # domif-getlink --interface <TAB><TAB>

causes virshDomainInterfaceCompleter() to be called, which calls
virshDomainGetXML() which eventually calls
vshCommandOptStringReq(.., name = "domain"); The --domain
argument is required for the command and if not present -1 should
be returned to tell the caller the argument was not found. Well,
zero is returned meaning the argument was not found but it's not
required either.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-02-28 10:36:24 +01:00
Julio Faracco
8fe09a5317 virsh: fixing segfault by pool autocompleter function.
The commands which requires a pool to perform any action for a volume is
throwing a segfault when you pass the volume name before a pool name or
without the argument '--pool'.

An example that works:
virsh # vol-list loops-pool
 Name                 Path
-------------------------------------------------------------------
 loop0                /mnt/loop0

virsh # vol-info --pool loops-pool lo<TAB>

An example that does not work:
virsh # vol-list loops-pool
 Name                 Path
-------------------------------------------------------------------
 loop0                /mnt/loop0

virsh # vol-info lo<TAB>
Segmentation Fault

The example 'vol-info' can be executed as 'vol-info loop0 --pool
loops-pool'. So, this commit fixes this problem when the arguments are
inverted and avoids the segfault.

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-02-28 10:07:35 +01:00
Christian Ehrhardt
ff02d1af40 tools: avoid text spilling into variables
While libvirt-guests.sh is running cases can let guest_is_on fail which
causes check_guests_shutdown to print output.
That output shall not spill into the users of function
check_guests_shutdown which is therefore now returning values in a
variable like guest_is_on already did.

Original-Author: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Modified-By: Jorge Niedbalski <niedbalski@ubuntu.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-02-23 13:03:56 +01:00
Daniel P. Berrangé
e694adf8ca tools: handle missing switch enum cases
Cast away enum type in places where we don't wish to cover all cases.

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-02-21 16:59:44 +00:00
Peter Krempa
ca9aac53d3 virsh: Fix internal naming of some blockjob commands
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-02-19 15:25:00 +01:00
Peter Krempa
f2f4e96060 virsh: Remove <backingStore> sub-element in virshFindDisk
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.

The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-02-14 16:04:46 +01:00
Peter Krempa
431e73660e virsh: detach-disk: Add --print-xml switch
Similarly to other commands add an argument which allows to check the
XML which would be used to execute the operation instead.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-02-14 16:04:46 +01:00
Daniel P. Berrangé
a1f6030def build: passing the "-z defs" linker flag to prevent undefined symbols
Undefined symbols are a bad thing in general because they can get
resolved in unexpected ways at runtime if multiple sources provide the
same symbol name. For example both glibc and libtirpc may provide XDR
symbols and we want to ensure that we resolve to libtirpc if that's what
we originally built against.

The toolchain maintainers thus strongly recommend that all applications
use the '-z defs' linker flag to prevent undefined symbols. This is
shortly becoming part of the default linker flags for RPMs. As an added
benefit this aligns Linux builds with Windows builds, where the linker
has never permitted undefined symbols.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2018-02-09 11:05:10 +00:00
Tiago M. Vieira
d0a60771ab fix regex to check CN from server certificate
Currently when the script validates the PKI files and
the certificate 'Subject:' field contains RDNs after
the Common Name (CN), these values are also included,
creating a false result that the CN is not correct.

A small change to the sed regex fixes this issue, by
extracting only the value for CN and nothing else. The
regex is replaced with the exact same regex used to
extract the CN value from the client certificate.
2018-02-08 18:05:05 +01:00
Daniel P. Berrangé
707022c3e8 tools: unlink bash completion files before symlinking
"ln" will not replace an existing symlink, so if you run 'make install'
twice, the second time will get an error:

  ln: failed to create symbolic link 'virsh': File exists

We must always remove the symlink target first.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-01-31 17:30:55 +00:00
Michal Privoznik
08327dfff3 tools: Make symlinks to vsh bash-completion script
The bash-completion project documents that only those scripts
from $BASH_COMPLETIONS_DIR that share name with the current
command for which <TAB> was hit are loaded [1]. This means, that
vsh script we have there is not loaded. We have to create
symlinks for virsh and virt-admin.

At the same time, we have to create new RPM package because
virt-admin and client packages are independent. That means we
cannot place the vsh script in either of them. What we can do is
to have a different package that contains the completion script
and then virt-admin and client packages contain only the symlink
and require the bash-completion package.

1: https://github.com/scop/bash-completion#faq

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-01-31 15:41:51 +01:00
Michal Privoznik
74f044acf7 virsh: Offer only persistent domains for autostart
The 'autostart' command accepts only persistent domains. Make the
completer return only those.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-01-31 15:41:51 +01:00
Michal Privoznik
3b225256cd virshDomainNameCompleter: Prune accepted flags
Only a small subset of VIR_CONNECT_LIST_DOMAINS_* flags are
actually used for this completer. Remove the unused ones. Note
that this is unrelated to other commands using
VIR_CONNECT_LIST_DOMAINS_* (i.e. cmdList) as this commit targets
the completer only and nothing else.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-01-31 15:41:51 +01:00
Erik Skultety
23594ccda9 vsh: Cmd aliases lookups should return results for the aliased command
Unfortunately, we have a number of aliases in virsh and even though
these are not visible any more, we have to support them. The problem is
that when trying to print help for the alias, we get SIGSEGV because
there isn't any @def structure anymore and we need to query the command
being aliased instead.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1538570

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2018-01-25 16:20:27 +01:00
Erik Skultety
da60878c4c vsh: Drop redundant definition searches from vshCmd{def,Grp}Help
These helpers are called from a single place only - cmdHelp wrapper and
just before the wrapper invokes the helpers, it performs the search,
either for command group or for the command itself, except the result is
discarded and the helper therefore needs to do it again. Drop this
inefficient handling and pass the @def structure rather than a name,
thus preventing the helper from needing to perform the search again.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2018-01-25 16:20:27 +01:00
Michal Privoznik
4cb4b649c3 virsh: Introduce virshSnapshotNameCompleter
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-01-24 13:51:23 +01:00
Michal Privoznik
bab521d837 virsh: Introduce virshSecretUUIDCompleter
This is a slight change from previous patches since virSecret
does not have a name only UUID strings.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-01-24 13:51:23 +01:00
Michal Privoznik
2ba76e5cc7 virsh: Introduce virshNWFilterNameCompleter
The virConnectListAllNWFilters() has no extra flags yet, which
simplifies things a bit.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-01-24 13:51:22 +01:00
Michal Privoznik
4cdce24348 virsh: Introduce virshNodeDeviceNameCompleter
Yet again, we don't need listing by device capabilities, so flags
are unused.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-01-24 13:51:22 +01:00