The tested configuration is not valid for a qemu VM. Move it to the
generic test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver explicitly rejects such configuration, thus this is just
a generic XML2XML test case. Move it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we parse <mac address="00:00:00:00:00:00"/> we keep that in memory
and pass it down to the hypervisor. However, that MAC address is not
strictly valid as it is not marked as locally administered (bit 0x02)
but it is not even globally unique. It is also used for loopback device
on Linux, for example. And QEMU sees such MAC address just as "not
specified" and generates a new one that libvirt does not even know
about. So to make the overall experience better we now generate it if
the supplied one is all clear.
Resolves: https://issues.redhat.com/browse/RHEL-974
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They represent nanoseconds, and we accept such values already. Not that
anyone would use such values in the wild, but even one person testing
QEMU could put in a bigger value and will be bothered with validation
errors after every `virsh edit`. Also add a test for it.
Resolves: https://issues.redhat.com/browse/RHEL-1717
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This patch introduces the
<maxphysaddr mode='passthrough'/>
<maxphysaddr mode='emulate' bits='42'/>
sub element of /domain/cpu, which allows specifying the guest virtual CPU
address size. This can be useful if the guest needs to have a large amount
of memory.
If mode='passthrough', the virtual CPU will have the same number of address
bits as the host. If mode='emulate', the mandatory bits attribute specifies
the number of address bits.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add launch security type 's390-pv' as well as some tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
I changed DO_TEST_DIFFERENT to DO_TEST, which allows us to remove
the duplicate out file. I also added id attribute for domain
element in order to parse it as a live XML ('cachetune id' is in
the output of only live XMLs). Lastly I added id of cachetune to
test its output value.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is present no XML test coverage for this.
Add genericxml parse + formatting coverage.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is only used in the ESX driver where, when set to "no", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
VMX conversion parts rewritten to apply on top of previously merged
support for type='generated|static'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some disk backends support configuring the readahead buffer or timeout
for requests. Add the knobs to the XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add possibility to specify one or more cookies for http based disks.
This patch adds the config parser, storage and validation of the
cookies.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow turning off verification of SSL cerificates add a new element
<ssl> to the disk source XML which will allow configuring the validation
process using the 'verify' attribute.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Following domain configuration changes create two memory bandwidth
monitors: one is monitoring the bandwidth consumed by vCPU 0,
another is for vCPU 5.
```
<cputune>
<memorytune vcpus='0-4'>
<node id='0' bandwidth='20'/>
<node id='1' bandwidth='30'/>
+ <monitor vcpus='0'/>
</memorytune>
+ <memorytune vcpus='5'>
+ <monitor vcpus='5'/>
+ </memorytune>
</cputune>
```
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
Originally, inside <cputune/cachetune>, it requires the <cache> element to
be in the position before <monitor>, and following configuration is not
permitted by schema, but it is better to let it be valid.
<cputune>
<cachetune vcpus='0-1'>
<monitor level='3' vcpus='0-1'/>
^
|__ Not permitted originally because it is in the place
before <cache> element.
<cache id='0' level='3' type='both' size='3' unit='MiB'/>
<cache id='1' level='3' type='both' size='3' unit='MiB'/>
</cachetune>
...
</cputune>
And, let schema do more strict check by identifying following configuration to
be invalid, due to <cachetune> should contain at least one <cache> or <monitor>
element.
<cputune>
<cachetune vcpus='0-1'>
^
|__ a <cachetune> SHOULD contain at least one <cache> or <monitor>
</cachetune>
...
</cputune>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
The 32-bit x86 binary is called qemu-system-i386, not
qemu-system-i686. This mistake across many test XML files was
not noticed because the mistake was also made in testutilsqemu.c
when mocking the capabilities.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
resctrl object stored in def->resctrls is shared by cachetune and
memorytune. The domain xml configuration is parsed firstly for
cachetune then memorytune, and the resctrl object will not be created
in parsing settings for memorytune once it found sharing exists.
But resctrl is improperly freed when sharing happens.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introducing <monitor> element under <cachetune> to represent
a cache monitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce a new section memorytune to support memory bandwidth allocation.
This is consistent with existing cachetune. As the example:
below:
<cputune>
......
<memorytune vcpus='0'>
<node id='0' bandwidth='30'/>
</memorytune>
</cputune>
vpus --- vpus subjected to this memory bandwidth.
id --- on which node memory bandwidth to be set.
bandwidth --- the memory bandwidth percent to set.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Adjust the documentation, parser and tests to change:
launch-security -> launchSecurity
reduced-phys-bits -> reducedPhysBits
dh-cert -> dhCert
Also fix the headline in formatdomain.html to be more generic,
and some leftover closing elements in the documentation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The launch-security element can be used to define the security
model to use when launching a domain. Currently we support 'sev'.
When 'sev' is used, the VM will be launched with AMD SEV feature enabled.
SEV feature supports running encrypted VM under the control of KVM.
Encrypted VMs have their pages (code and data) secured such that only the
guest itself has access to the unencrypted version. Each encrypted VM is
associated with a unique encryption key; if its data is accessed to a
different entity using a different key the encrypted guests data will be
incorrectly decrypted, leading to unintelligible data.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
TSEG (Top of Memory Segment) is one of many regions that SMM (System Management
Mode) can occupy. This one, however is special, because a) most of the SMM code
lives in TSEG nowadays and b) QEMU just (well, some time ago) added support for
so called 'extended' TSEG. The difference to the TSEG implemented in real q35's
MCH (Memory Controller Hub) is that it can offer one extra size to the guest OS
apart from the standard TSEG's 1, 2, and 8 MiB and that size can be selected in
1 MiB increments. Maximum may vary based on QEMU and is way too big, so we
don't need to check for the maximum here. Similarly to the memory size we'll
leave it to the hypervisor to try satisfying that and giving us an error message
in case it is not possible.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Cachetune for unavailable vCPUs should be cleared the same way vcpupin and other
things do, so let's add tests for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
More info in the documentation, this is basically the XML parsing/formatting
support, schemas, tests and documentation for the new cputune/cachetune element
that will get used by following patches.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There's no reason for the files to have generic- prefix
since they all live under genericxml2xmlindata and
genericxml2xmloutdata directories.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently we accept and correctly parse this chardev XML:
...
<channel type='tcp'>
<source mode='connect'/>
<source mode='bind' host='localhost'/>
<source service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
The parsed formatted XML is:
...
<channel type='tcp'>
<source mode='connect' host='localhost' service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
That behavior is super wrong and should not be allowed. If you notice
the current parse takes the first found attribute and uses that value,
so for example from the "<source mode='bind' host='localhost'/>" only
the "host" attribute is used. It works the same way for all possible
attributes that we are able to parse for source element.
This patch enforces providing only one source element for all character
devices, only for UDP type we allow to provide two source elements
since you can specify both modes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Fill them in right away rather than having to figure out at runtime
whether they are necessary or not.
virStorageSourceNetworkDefaultPort does not need to be exported any
more.
This patch introduces
<cache level='N' mode='emulate'/>
<cache mode='passthrough'/>
<cache mode='disable'/>
sub element of /domain/cpu. Currently only a single <cache> element is
allowed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.
Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The issue is that if this graphics definition is provided:
<graphics type='vnc' port='0'/>
it's parsed as:
<graphics type='vnc' autoport='no'>
<listen type='address'/>
</graphics>
but if the resulting XML is parsed again the output is:
<graphics type='vnc' port='-1' autoport='yes'>
<listen type='address'/>
</graphics>
and this should not happen. The XML have to always remain the same
after it was already parsed by libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1383039
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
