* src/qemu/qemu_conf.h: Remove QEMU_CMD_FLAG_0_12 and just leave
the lone JSON flag
* src/qemu/qemu_conf.c: Enable JSON on QEMU 0.13 or later, but
leave it disabled for now
The Xen code for making HVM VT-d PCI passthrough attach and detach
wasn't working properly:
1) In xenDaemonAttachDevice(), we were always trying to reconfigure
a PCI passthrough device, even the first time we added it. This was
because the code in virDomainXMLDevID() was not checking xenstore for
the existence of the device, and always returning 0 (meaning that
the device already existed).
2) In xenDaemonDetachDevice(), we were trying to use "device_destroy"
to detach a PCI device. While you would think that is the right
method to call, it's actually wrong for PCI devices. In particular,
in upstream Xen (and soon in RHEL-5 Xen), device_configure is actually
used to destroy a PCI device.
To fix the attach
problem I add a lookup into xenstore to see if the device we are
trying to attach already exists. To fix the detach problem I change
it so that for PCI detach (only), we use device_configure with the
appropriate sxpr to do the detachment.
* src/xen/xend_internal.c: don't use device_destroy for PCI devices
and fix the other issues.
* src/xen/xs_internal.c src/xen/xs_internal.h: add
xenStoreDomainGetPCIID()
The XML XPath for detecting JSON in the running VM statefile was
wrong causing all VMs to get JSON mode enabled at libvirtd restart.
In addition if a VM was running a JSON enabled QEMU once, and then
altered to point to a non-JSON enabled QEMU later the 'monJSON'
flag would not get reset to 0.
* src/qemu/qemu_driver.c: Fix setting/detection of JSON mode
The code for connecting to a server tries each socket in turn
until it finds one that connects. Unfortunately for TLS sockets
if it connected, but failed TLS handshake it would treat that
as a failure to connect, and try the next socket. This is bad,
it should have reported the TLS failure immediately.
$ virsh -c qemu://somehost.com/system
error: unable to connect to libvirtd at 'somehost.com': Invalid argument
error: failed to connect to the hypervisor
$ ./tools/virsh -c qemu://somehost.com/system
error: server certificate failed validation: The certificate hasn't got a known issuer.
error: failed to connect to the hypervisor
* src/remote/remote_driver.c: Stop trying to connect if the
TLS handshake fails
Use a dynamically sized xdr_array to pass memory stats on the wire. This
supports the addition of future memory stats and reduces the message size
since only supported statistics are returned.
* src/remote/remote_protocol.x: provide defines for the new entry point
* src/remote/remote_driver.c daemon/remote.c: implement the client and
server side
* daemon/remote_dispatch_args.h daemon/remote_dispatch_prototypes.h
daemon/remote_dispatch_ret.h daemon/remote_dispatch_table.h
src/remote/remote_protocol.c src/remote/remote_protocol.h: generated
stubs
Support for memory statistics reporting is accepted for qemu inclusion.
Statistics are reported via the monitor command 'info balloon' as a comma
seprated list:
(qemu) info balloon
balloon: actual=1024,mem_swapped_in=0,mem_swapped_out=0,major_page_faults=88,minor_page_faults=105535,free_mem=1017065472,total_mem=1045229568
Libvirt, qemu, and the guest operating system may support a subset of the
statistics defined by the virtio spec. Thus, only statistics recognized by
components will be reported.
* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement the
new entry point by using info balloon monitor command
Set up the types for the domainMemoryStats function and insert it into the
virDriver structure definition. Because of static initializers, update
every driver and set the new field to NULL.
* include/libvirt/libvirt.h.in: new API
* src/driver.h src/*/*_driver.c src/vbox/vbox_tmpl.c: add the new
entry to the driver structure
* python/generator.py: fix compiler errors, the actual python binding is
implemented later
If a virtual machine is destroyed on a ESX server then immediately
undefining this virtual machine on a vCenter may fail, because the
vCenter has not been informed about the status change yet. Therefore,
destroy a virtual machine on a vCenter if available, so the vCenter
is up-to-date when the virtual machine should be undefined.
Undefining a virtual machine on an ESX server leaves a orphan on the
vCenter behind. So undefine a virtual machine on a vCenter if available
to fix this problem.
If an ESX host is managed by a vCenter, it knows the IP address of the
vCenter. Setting the vCenter query parameter to * allows to connect to the
vCenter known to an ESX host without the need to specify its IP address
or hostname explicitly.
esxDomainLookupByUUID() and esxDomainIsActive() lookup a domain by asking
ESX for all known domains and searching manually for the one with the
matching UUID. This is inefficient. The VI API allows to lookup by UUID
directly: FindByUuid().
* src/esx/esx_driver.c: change esxDomainLookupByUUID() and esxDomainIsActive()
to use esxVI_LookupVirtualMachineByUuid(), also reorder some functions to
keep them in sync with the driver struct
Questions can block tasks, to handle them automatically the driver can answers
them with the default answer. The auto_answer query parameter allows to enable
this automatic question handling.
* src/esx/README: add a detailed explanation for automatic question handling
* src/esx/esx_driver.c: add automatic question handling for all task related
driver functions
* src/esx/esx_util.[ch]: add handling for the auto_answer query parameter
* src/esx/esx_vi.[ch], src/esx/esx_vi_methods.[ch], src/esx/esx_vi_types.[ch]:
add new VI API methods and types and additional helper functions for
automatic question handling
Commit 33a198c1f6 increased the gcrypt
version requirement to 1.4.2 because the GCRY_THREAD_OPTION_VERSION
define was added in this version.
The configure script doesn't check for the gcrypt version. To support
gcrypt versions < 1.4.2 change the virTLSThreadImpl initialization
to use GCRY_THREAD_OPTION_VERSION only if it's defined.
Each driver supporting CPU selection must fill in host CPU capabilities.
When filling them, drivers for hypervisors running on the same node as
libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers,
such as VMware, need to implement their own way of getting such data.
Raw data can be decoded into virCPUDefPtr using cpuDecode() function.
When implementing virConnectCompareCPU(), a hypervisor driver can just
call cpuCompareXML() function with host CPU capabilities.
For each guest for which a driver supports selecting CPU models, it must
set the appropriate feature in guest's capabilities:
virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0)
Actions needed when a domain is being created depend on whether the
hypervisor understands raw CPU data (currently CPUID for i686, x86_64
architectures) or symbolic names has to be used.
Typical use by hypervisors which prefer CPUID (such as VMware and Xen):
- convert guest CPU configuration from domain's XML into a set of raw
data structures each representing one of the feature policies:
cpuEncode(conn, architecture, guest_cpu_config,
&forced_data, &required_data, &optional_data,
&disabled_data, &forbidden_data)
- create a mask or whatever the hypervisor expects to see and pass it
to the hypervisor
Typical use by hypervisors with symbolic model names (such as QEMU):
- get raw CPU data for a computed guest CPU:
cpuGuestData(conn, host_cpu, guest_cpu_config, &data)
- decode raw data into virCPUDefPtr with a possible restriction on
allowed model names:
cpuDecode(conn, guest, data, n_allowed_models, allowed_models)
- pass guest->model and guest->features to the hypervisor
* src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c
src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h
src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h
* configure.in: check for CPUID instruction
* src/Makefile.am: glue the new files in
* src/libvirt_private.syms: add new private symbols
* po/POTFILES.in: add new cpu files containing translatable strings
* src/remote/remote_protocol.x: update with new entry point
* daemon/remote.c: add the new server dispatcher
* daemon/remote_dispatch_args.h daemon/remote_dispatch_prototypes.h
daemon/remote_dispatch_ret.h daemon/remote_dispatch_table.h
src/remote/remote_protocol.c src/remote/remote_protocol.h: regenerated
* src/driver.h: add an extra entry point in the structure
* src/esx/esx_driver.c src/lxc/lxc_driver.c src/opennebula/one_driver.c
src/openvz/openvz_driver.c src/phyp/phyp_driver.c src/qemu/qemu_driver.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/vbox/vbox_tmpl.c src/xen/xen_driver.c: add NULL entry points for
all drivers
* include/libvirt/virterror.h src/util/virterror.c: add new domain
VIR_FROM_CPU for errors
* src/conf/cpu_conf.c src/conf/cpu_conf.h: new parsing module
* src/Makefile.am proxy/Makefile.am: include new files
* src/conf/capabilities.[ch] src/conf/domain_conf.[ch]: reference
new code
* src/libvirt_private.syms: private export of new entry points
GNUTLS uses gcrypt for its crypto functions. gcrypt requires
that the app/library initializes threading before using it.
We don't want to force apps using libvirt to know about
gcrypt, so we make virInitialize init threading on their
behalf. This location also ensures libvirtd has initialized
it correctly. This initialization is required even if libvirt
itself were only using one thread, since another non-libvirt
library (eg GTK-VNC) could also be using gcrypt from another
thread
* src/libvirt.c: Register thread functions for gcrypt
* configure.in: Add -lgcrypt to linker flags
* src/storage/storage_driver.c: Fix IsPersistent() and IsActivE()
methods on storage pools to use 'storagePrivateData' instead
of 'privateData'. Also fix naming convention of objects
* src/esx/esx_vi.c (esxVI_List_CastFromAnyType): For invalid
inputs, fail right away. Do not "goto failure" where a NULL
input pointer would be dereferenced.
* src/esx/esx_util.c (esxUtil_ParseDatastoreRelatedPath): Return
right away for invalid inputs, rather than using them (which would
dereference NULL pointers) in clean-up code.
The virFileResolveLink utility function relied on the POSIX guarantee
that stat.st_size of a symlink is the length of the value. However,
on some types of file systems, it is invalid, so do not rely on it.
Use gnulib's areadlink module instead.
* bootstrap (modules): Add areadlink.
* src/util/util.c: Include "areadlink.h".
Let areadlink perform the readlink and malloc.
* configure.in (AC_CHECK_FUNCS): Remove readlink. No need,
since it's presence is guaranteed by gnulib.
* src/xen/xm_internal.c (xenXMConfigGetULong): Remove useless and
misleading test (always false) for val->str == NULL before code that
always dereferences val->str. "val" comes from virConfGetValue, and
at that point, val->str is guaranteed to be non-NULL.
(xenXMConfigGetBool): Likewise.
* src/util/conf.c (virConfSetValue): Ensure that vir->str is never NULL,
not even if someone tries to set such a value via virConfSetValue.
* src/qemu/qemu_driver.c (doNonTunnelMigrate): Don't let a
NULL "uri_out" provoke a NULL-dereference in doNativeMigrate:
supply omitted goto-after-qemudReportError.
* src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Upon an
out of memory error, we would end up with unixfile==NULL and attempt
to unlink(NULL). Skip the unlink when it's NULL.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Set
"event" to NULL after qemuDomainEventQueue frees it, so a
subsequent free (after endjob label) upon qemuMonitorStartCPUs
failure does not cause a double free.
* src/node_device/node_device_driver.c (update_driver_name): The
previous code would write one byte beyond the end of the 4KiB
stack buffer when presented with a symlink value of exactly that
length (very unlikely). Remove the automatic buffer and use
virFileResolveLink in place of readlink. Suggested by Daniel Veillard.
* src/storage/storage_backend_fs.c: virStorageBackendFileSystemDelete
was incorrectly calling unlink() in an attempt to remove a directory.
It should be calling rmdir() instead.
src/node_device/node_device_udev.c was using a function available only
on the daemon code, fix this and use the function available globally
* src/node_device/node_device_udev.c: replace use of virEventAddHandleImpl
by virEventAddHandle
If there are no references remaining to the object, vm is set to NULL
and vm->persistent cannot be accessed. Fixed by this trivial patch.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Avoid possible
NULL pointer dereference on --crash dump.
This is trivial for QEMU since you just have to not stop the vm before
starting the dump. And for Xen, you just pass the flag down to xend.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): Add VIR_DUMP_LIVE.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Support live dumping.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support live dumping.
* tools/virsh.c (opts_dump): Add --live. (cmdDump): Map it to VIR_DUMP_LIVE.
This patch adds the --crash option (already present in "xm dump-core")
to "virsh dump". virDomainCoreDump already has a flags argument, so
the API/ABI is untouched.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): New flag for
CoreDump
* src/test/test_driver.c (testDomainCoreDump): Do not crash
after dump unless VIR_DUMP_CRASH is given.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Shutdown the domain
instead of restarting it if --crash is passed.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support --crash.
* tools/virsh.c (opts_dump): Add --crash.
(cmdDump): Map it to flags for virDomainCoreDump and pass them.
1) qemuMigrateToCommand uses ">>" so we have to truncate the file
before starting the migration;
2) the command wasn't updated to chown the driver and set/restore
the security lavels;
3) the VM does not have to be resumed if migration fails;
4) the file is not removed when migration fails.
* src/qemu/qemu_driver.c (qemuDomainCoreDump): Truncate file before
dumping, set/restore ownership and security labels for the file.
Those were pointed by DanB in his review but not yet fixed
* src/qemu/qemu_driver.c: qemudWaitForMonitor() use EnterMonitorWithDriver()
and ExitMonitorWithDriver() there
* src/qemu/qemu_monitor_text.c: checking fro strdu failure and hash
table add error in qemuMonitorTextGetPtyPaths()
This change makes the QEMU driver get pty paths from the output of the
monitor 'info chardev' command. This output is structured, and contains
both the name of the device and the path on the same line. This is
considerably more reliable than parsing the startup log output, which
requires the parsing code to know which order QEMU will print pty
information in.
Note that we still need to parse the log output as the monitor itself
may be on a pty. This should be rare, however, and the new code will
replace all pty paths parsed by the log output method once the monitor
is available.
* src/qemu/qemu_monitor.(c|h) src/qemu_monitor_text.(c|h): Implement
qemuMonitorGetPtyPaths().
* src/qemu/qemu_driver.c: Get pty path information using
qemuMonitorGetPtyPaths().
Change -monitor, -serial and -parallel output to use -chardev if it is
available.
* src/qemu/qemu_conf.c: Update qemudBuildCommandLine to use -chardev where
available.
* tests/qemuxml2argvtest.c tests/qemuxml2argvdata/: Add -chardev equivalents
for all current serial and parallel tests.
Even if qemudStartVMDaemon suceeds, an error was logged such as
'qemuRemoveCgroup:1778 : internal error Unable to find cgroup for'.
This is because qemudStartVMDaemon calls qemuRemoveCgroup to
ensure that old cgroup does not remain. This workaround makes
sense but leaving an error message may confuse users.
* src/qemu/qemu_driver.c: a an option to the function to suppress the
error being logged
This patch fixes the bug where paused/running state is not
transmitted during migration. As a result, in the QEMU driver
for example the machine was always started on the destination
end.
In order to do so, just read the state and if it is appropriate and
set the VIR_MIGRATE_PAUSED flag.
* src/libvirt.c (virDomainMigrateVersion1, virDomainMigrateVersion2):
Automatically add VIR_MIGRATE_PAUSED when appropriate.
* src/xen/xend_internal.c (xenDaemonDomainMigratePerform): Give a nicer
error message when migration of paused domains is attempted.
This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.
* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.
This makes a small change on the failed-migration path. Up to now,
all VMs that failed non-live migration after the "stop" command
were restarted. This must not be done when the VM was paused in
the first place.
* src/qemu/qemu_driver.c (qemudDomainMigratePerform): Do not restart
a paused VM that fails migration. Set paused state after "stop",
reset it after failure.
We don't use this method of reloading rules anymore, so we can just
kill the code.
This simplifies things a lot because we no longer need to keep a
table of the rules we've added.
* src/util/iptables.c: kill iptablesReloadRules()
Long ago we tried to use Fedora's lokkit utility in order to register
our iptables rules so that 'service iptables restart' would
automatically load our rules.
There was one fatal flaw - if the user had configured iptables without
lokkit, then we would clobber that configuration by running lokkit.
We quickly disabled lokkit support, but never removed it. Let's do
that now.
The 'my virtual network stops working when I restart iptables' still
remains. For all the background on this saga, see:
https://bugzilla.redhat.com/227011
* src/util/iptables.c: remove lokkit support
* configure.in: remove --enable-lokkit
* libvirt.spec.in: remove the dirs used only for saving rules for lokkit
* src/Makefile.am: ditto
* src/libvirt_private.syms, src/network/bridge_driver.c,
src/util/iptables.h: remove references to iptablesSaveRules
This is the expected behaviour, I think - reloading libvirtd should
be a subset of restarting it.
Note, we reload the rules after we've determined which networks
are active (because we only add the rules for active networks)
and before we start autostart networks (to avoid re-adding the
rules).
* src/network/bridge_driver.c: reload iptables rules on startup
Currently, when we add iptables rules, we keep them on a list so that
we can easily reload them on e.g. 'service libvirtd reload'.
However, we don't save this list to disk, so if libvirtd is restarted
we lose the ability to reload the rules.
The fix is simple - just re-add the damn things on reload.
Note, we delete the rules before re-adding them, just like the current
behaviour of iptRulesReload().
* src/network/bridge_driver.c: re-add the iptables rules on reload.
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
xen-unstable changesets 20321 and 20521 added support for
description in xend domain config. This patch extends that
support in xend backend.
* src/xen/xend_internal.c: add parse and output of domain description
The QEMU 0.10.0 release (and possibly other 0.10.x) has a bug where
it sometimes/often forgets to display the initial monitor greeting
line, soley printing a (qemu). This in turn confuses the text
console parsing because it has a '(qemu)' it is not expecting. The
confusion results in a negative malloc. Bad things follow.
This re-writes the text console handling to be more robust. The key
idea is that it should only look for a (qemu), once it has seen the
original command echo'd back. This ensures it'll skip the bogus stray
(qemu) with broken QEMUs.
* src/qemu/qemu_monitor.c: Add some (disabled) debug code
* src/qemu/qemu_monitor_text.c: Re-write way command replies
are detected
Since the monitor I/O is processed out of band from the main
thread(s) invoking monitor commands, the virDomainObj may be
deleted by the I/O thread. The qemuDomainObjBeginJob takes an
extra reference to protect against final deletion, but this
reference is released by the corresponding EndJob call. THus
after the EndJob call it may not be valid to reference the
virDomainObj any more. To allow callers to detect this, the
EndJob call is changed to return the remaining reference count.
* src/conf/domain_conf.c: Make virDomainObjUnref return the
remaining reference count
* src/qemu/qemu_driver.c: Avoid referencing virDomainObjPtr
after qemuDomainObjEndJob if it has been deleted.
Fix this warning, there is no need to use an intermediate,
different array pointer.
network.c: In function 'getIPv6Addr':
network.c:50: warning: dereferencing type-punned pointer will break strict-aliasing rules
* src/util/network.c: avoid an intermediary pointer cast
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add callbacks
for reset, shutdown, poweroff and stop events. Add convenience
methods for emiting those events
With addition of events there will be alot of callbacks.
To avoid having to add many APIs to register callbacks,
provide them all at once in a big table
* src/qemu/qemu_driver.c: Pass in a callback table to QEMU
monitor code
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h Replace
the EOF and disk secret callbacks with a callback table
Initial support for the new QEMU monitor protocol using JSON
as the data encoding format instead of plain text
* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
Now that drivers are using a private domain object state blob,
the virDomainObjFormat/Parse methods are no longer able to
directly serialize all neccessary state to/from XML. It is
thus neccessary to introduce a pair of callbacks fo serializing
private state.
The code for serializing vCPU PIDs and the monitor device
config can now move out of domain_conf.c and into the
qemu_driver.c where they belong.
* src/conf/capabilities.h: Add callbacks for serializing private
state to/from XML
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the
monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids
fields from virDomainObjPtr. Remove code that serialized
those fields
* src/libvirt_private.syms: Export virXPathBoolean
* src/qemu/qemu_driver.c: Add callbacks for serializing monitor
and vcpupid data to/from XML
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor
char device config into qemuMonitorOpen directly.
The code to start CPUs executing has nothing todo with CPU
affinity masks, so pull it out of the qemudInitCpuAffinity()
method and up into qemudStartVMDaemon()
* src/qemu/qemu_driver.c: Pull code to start CPUs executing out
of qemudInitCpuAffinity()
The current QEMU disk media change does not support setting the
disk format. The new JSON monitor will support this, so add an
extra parameter to pass this info in
* src/qemu/qemu_driver.c: Pass in disk format when changing media
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Add a 'format' arg to qemuMonitorChangeMedia()
The qemuMonitorEscape() method, and the VIR_ENUM for migration
status will be needed by the JSON monitor too, so move that code
into the shared qemu_monitor.c file instead of qemu_monitor_text.c
* src/qemu/qemu_monitor.h: Declare qemuMonitorMigrationStatus enum
and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor.c: Implement qemuMonitorMigrationStatus enum
and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor_text.c: Remove above methods/enum
If QEMU shuts down while we're in the middle of processing a
monitor command, the monitor will be freed, and upon cleaning
up we attempt to do qemuMonitorUnlock(priv->mon) when priv->mon
is NULL.
To address this we introduce proper reference counting into
the qemuMonitorPtr object, and hold an extra reference whenever
executing a command.
* src/qemu/qemu_driver.c: Hold a reference on the monitor while
executing commands, and only NULL-ify the priv->mon field when
the last reference is released
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add reference
counting to handle safe deletion of monitor objects
configure: yajl: no
CC libvirt_util_la-json.lo
util/json.c:32:27: error: yajl/yajl_gen.h: No such file or directory
util/json.c:33:29: error: yajl/yajl_parse.h: No such file or directory
* src/util/json.c: remove the includes if yajl not configured in
This introduces simple API for handling JSON data. There is
an internal data structure 'virJSONValuePtr' which stores a
arbitrary nested JSON value (number, string, array, object,
nul, etc). There are APIs for constructing/querying objects
and APIs for parsing/formatting string formatted JSON data.
This uses the YAJL library for parsing/formatting from
http://lloyd.github.com/yajl/
* src/util/json.h, src/util/json.c: Data structures and APIs
for representing JSON data, and parsing/formatting it
* configure.in: Add check for yajl library
* libvirt.spec.in: Add build requires for yajl
* src/Makefile.am: Add json.c/h
* src/libvirt_private.syms: Export JSON symbols to drivers
Some of the very useful calls for XML parsing provided by util/xml.[ch]
were not exported as private symbols. This patch fixes this.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Xen HVM guests with PV drivers end up with two network interfaces for
each configured interface. One of them being emulated by qemu and the
other one paravirtual. As this might not be desirable, the attached
patch provides a way for users to specify that only paravirtual network
interface should be presented to the guest.
The configuration was inspired by qemu/kvm driver, for which users can
specify model='virtio' to use paravirtual network interface.
The patch adds support for model='netfront' which results in
type=netfront instead of type=ioemu (or nothing for newer xen versions)
in guests native configuration. Xen's qemu ignores interfaces with
type != ioemu and only paravirtual network device will be seen in the
guest.
Four possible configuration scenarios follow:
- no model specified in domain's XML
- libvirt will behave like before this change; it will set
type=ioemu for HVM guests on xen host which is not newer than
XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU
- covered by existing tests
- PV guest, any model
- no functional change, model is passed as is (and ignored by the
hypervisor)
- covered by existing tests (e.g., *-net-e1000.*)
- HVM guest, model=netfront
- type is set to "netfront", model is not specified
- covered by new *-net-netfront.* tests
- HVM guest, model != netfront
- type is set to "ioemu", model is passed as is
- covered by new *-net-ioemu.* tests
The fourth scenario feels like a regression for xen newer than
XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU as users who had a model specified
in their guest's configuration won't see a paravirtual interface in
their guests any more. On the other hand, the reason for specifying a
model is most likely the fact that they want to use such model which
implies emulated interface. Users of older xen won't be affected at all
as their xen provides paravirtual interface regardless of the type used.
- src/xen/xend_internal.c: add netfront support for the xend backend
- src/xen/xm_internal.c: add netfront support for the XM serialization too
Also fixed serial port configuration which was broken due to recent
change in virDomainChrDef where targetType was newly added.
* src/Makefile.am: add new files
* src/vbox/vbox_driver.c: add case for version 3.1
* src/vbox/vbox_tmpl.c: refactor common patterns into macros, support for
version 3.1, serial port configuration fix
* src/vbox/vbox_CAPI_v3_1.h, src/vbox/vbox_V3_1.c: generated code
esxVMX_IndexToDiskName handles indices up to 701. This limit comes
from a mapping gap in virDiskNameToIndex:
sdzy -> 700
sdzz -> 701
sdaaa -> 728
sdaab -> 729
This line in virDiskNameToIndex causes this gap:
idx = (idx + i) * 26;
Fixing it by altering this line to:
idx = (idx + (i < 1 ? 0 : 1)) * 26;
Also add a new version of virIndexToDiskName that handles the inverse
mapping for arbitrary indices.
* src/esx/esx_vmx.[ch]: remove esxVMX_IndexToDiskName
* src/util/util.[ch]: add virIndexToDiskName and fix mapping gap
* tests/esxutilstest.c: update test to verify that the gap is fixed
* src/conf/domain_conf.c: don't call virDomainObjUnlock twice
* src/qemu/qemu_driver.c: relock driver lock if an error occurs in
qemuDomainObjBeginJobWithDriver, enter/exit monitor with driver
in qemudDomainSave
The instruction "See Makefile.am" in libvirt.private_syms
always makes me think that this file is autogenerated
and should not be touched manually. This patch spares
every reader of libvirt.private_syms the hassle of
reading Makefile.am before augmenting libvirt.private_syms.
Signed-off-by: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Commit 790f0b3057 causes the contents of
the names array to be freed even on success, resulting in no listing of
defined but inactive Xen domains.
Spotted by Jim Fehlig
Introduce a new type="dir" mode for <disks> that allows use of
QEMU's virtual FAT block device driver. eg
<disk type='dir' device='floppy'>
<source dir='/tmp/test'/>
<target dev='fda' bus='fdc'/>
<readonly/>
</disk>
gets turned into
-drive file=fat:floppy:/tmp/test,if=floppy,index=0
Only read-only disks are supported with virtual FAT mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
disk args
* src/security/security_selinux.c: Temporarily skip labelling
of directory based disks
The cpu_set_t type can only cope with NR_CPUS <= 1024, beyond this
it is neccessary to use alternate CPU_SET maps with a dynamically
allocated CPU map
* src/util/processinfo.c: Support new unlimited size CPU set type
* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
and virProcessInfoGetAffinity to internal drivers
0.7.3 was broken
* configure.in docs/news.html.in: release of 0.7.4
* configure.in libvirt.spec.in: require netcf >= 0.1.4
* src/Makefile.am: node_device/node_device_udev.h was missing from
NODE_DEVICE_DRIVER_UDEV_SOURCES breaking compilation on platforms with
udev
Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.
* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
and qemu-kvm-0.11.0-rc2 regression tests
Erroneously included the sysfs_path and parent_sysfs_path elements in
the node device xml, they were not supposed to show up there
* src/conf/node_device_conf.c: remove the output of the 2 fields
I realized that I inadvertently added a member to the def struct to
contain each device's sysfs path when there was an existing member in the
dev struct for "OS specific path to device metadat, eg sysfs" Since the
udev backend needs to record the sysfs path while it's in the process of
creating the device, before the dev struct gets allocated, I chose to
remove the member from the dev struct.
* src/conf/node_device_conf.c src/conf/node_device_conf.h
src/node_device/node_device_driver.c src/node_device/node_device_hal.c
src/node_device/node_device_udev.c: remove devicePath from the
structure and use def->sysfs_path instead
The qemudStartVMDaemon() and several functions it calls use
the QEMU monitor. The QEMU driver is locked while this function
is executing, so it is rquired to release the driver lock and
reacquire it either side of issuing a monitor command. It
failed todo so, leading to deadlock
* qemu/qemu_driver.c: Release driver when in qemudStartVMDaemon
and things it calls
VMware uses two MAC address prefixes: 00:0c:29 and 00:50:56. The 00:0c:29
prefix is used for ESX server generated addresses. The 00:50:56 prefix is
split into two parts. MAC addresses above 00:50:56:3f:ff:ff are generated
by a vCenter. The rest of the 00:50:56 prefix can be assigned manually.
Any MAC address within the 00:0c:29 and 00:50:56 prefix can be specified
in a domain XML config and the driver will handle the details internally.
* src/esx/esx_vmx.c: fix MAC address formatting
* tests/xml2vmxdata/*: update test files accordingly
* docs/drivers.html.in: list the ESX driver
* docs/drvesx.html.in: the new ESX driver documentation
* docs/hvsupport.html.in: add the ESX driver to the matrix
* docs/index.html.in, docs/sitemap.html.in: list the ESX driver
* src/esx/esx_driver.c: fix and cleanup some comments
* src/xen/xen_hypervisor.c: xen-unstable changeset 19788 removed
MAX_VIRT_CPUS from public headers, breaking compilation of libvirt
on -unstable. Its semanitc was retained with XEN_LEGACY_MAX_VCPUS.
Ensure MAX_VIRT_CPUS is defined accordingly.
The QEMU monitor open method would not take a reference on
the virDomainObjPtr until it had successfully opened the
monitor. The cleanup code upon failure to open though would
call qemuMonitorClose() which would in turn decrement the
reference count. This caused the virDoaminObjPtr to be mistakenly
freed and then the whole driver crashes
* src/qemu/qemu_monitor.c: Fix reference counting in
qemuMonitorOpen
The HAL driver returns a fatal error code in the case where HAL
is not running. This causes the entire libvirtd daemon to quit
which isn't desirable. Instead it should simply disable the HAL
driver
* src/node_device/node_device_hal.c: Quietly disable HAL if it is
not running
Fixes https://launchpad.net/bugs/453335
* src/security/virt-aa-helper.c: suppress confusing and misleading
apparmor denied message when kvm/qemu tries to open a libvirt specified
readonly file (such as a cdrom) with write permissions. libvirt uses
the readonly attribute for the security driver only, and has no way
of telling kvm/qemu that the device should be opened readonly
Fixes https://launchpad.net/bugs/460271
* src/security/virt-aa-helper.c: require absolute path for dynamic added
files. This is required by AppArmor and conveniently prevents adding
tcp consoles to the profile
The wrong variable was being passed in with the LXC event callback
resulting in a later deadlock or crash
* src/lxc/lxc_driver.c: Pass 'vm' instead of 'driver' to event
callback
In the scenario where the cgroups were mounted but the
particular group did not exist, and the caller had not
requested auto-creation, the code would fail to return
an error condition. This caused the lxc_controller to
think the cgroup existed, and it then later failed when
attempting to use it
* src/util/cgroup.c: Raise an error if the cgroup path does not
exist
There is a race condition in HAL driver startup where the callback
can get triggered before we have finished startup. This then causes
a deadlock in the driver.
* src/node_device/node_device_hal.c: RElease driver lock before
registering DBus callbacks
If the virDomainDefPtr object has an 'id' of -1, then forcably
set the VIR_DOMAIN_XML_INACTIVE flag to ensure generated XML
does not include any cruft from the previously running guest
such as console PTY path, or VNC port.
* src/conf/domain_conf.c: Set VIR_DOMAIN_XML_INACTIVE if
def->id is -1. Replace checks for def->id == -1 with
check against flags & VIR_DOMAIN_XML_INACTIVE.
The capng_lock() call sets the SECURE_NO_SETUID_FIXUP and SECURE_NOROOT
bits on the process. This prevents the kernel granting capabilities to
processes with an effective UID of 0, or with setuid programs. This is
not actually what we want in the container init process. It should be
allowed to run setuid processes & keep capabilities when root. All that
is required is masking a handful of dangerous capabilities from the
bounding set.
* src/lxc/lxc_container.c: Remove bogus capng_lock() call.
* src/security/virt-aa-helper.c: get_definition() now calls the new
caps_mockup() function which will parse the XML for os.type,
os.type.arch and then sets the wordsize. These attributes are needed
only to get a valid virCapsPtr for virDomainDefParseString(). The -H
and -b options are now removed from virt-aa-helper (they weren't used
yet anyway).
* tests/virt-aa-helper-test: extend and fixes tests, chmod'ed 755
uses libpciaccess to provide human readable names for PCI vendor and
device IDs
* configure.in: add a requirement for libpciaccess >= 0.10.0
* src/Makefile.am: add the associated compilation flags and link
* src/node_device/node_device_udev.c: lookup the libpciaccess for
vendor name and product name based on their ids
* configure.in src/Makefile.am: remove the configuration check and
build instructions
* src/node_device/node_device_devkit.c: removed the module
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
removed references to the old backend
* src/conf/node_device_conf.h src/conf/node_device_conf.c: add specific
support for SCSI target in node device capabilities
* src/node_device/node_device_udev.c: add some extra detection code
when handling udev output
* configure.in: add new --with-udev, disabled by default, and requiring
libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
of fields in node device definitions, and an API to look them up,
remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
virBuildPath and virBuildPathInternal() function
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
* src/xen/xen_driver.c: Add support for VIR_MIGRATE_PERSIST_DEST flag
* src/xen/xend_internal.c: Add support for VIR_MIGRATE_UNDEFINE_SOURCE flag
* include/libvirt/virterror.h, src/util/virterror.c: Add new errorcode
VIR_ERR_MIGRATE_PERSIST_FAILED
* src/conf/domain_conf.h src/conf/domain_conf.c: add the new entry in
the enum and lists of virDomainDiskBus
* src/qemu/qemu_conf.c: same for virDomainDiskQEMUBus
The xenstore database sometimes has stale domain IDs which are not
present in the hypervisor anymore. Filter these out to avoid causing
confusion
* src/xen/xs_internal.c: Filter domain IDs against HV's list
* src/xen/xen_hypervisor.h, src/xen/xen_hypervisor.c: Add new
xenHypervisorHasDomain() method for checking ID validity
The xenUnifiedNumOfDomains and xenUnifiedListDomains methods work
together as a pair, so it is critical they both apply the same
logic. With the current mis-matched logic it is possible to sometimes
get into a state when you miss certain active guests.
* src/xen/xen_driver.c: Change xenUnifiedNumOfDomains ordering to
match xenUnifiedListDomains.
When running qemu:///system instance, libvirtd runs as root,
but QEMU may optionally be configured to run non-root. When
then saving a guest to a state file, the file is initially
created as root, and thus QEMU cannot write to it. It is also
missing labelling required to allow access via SELinux.
* src/qemu/qemu_driver.c: Set ownership on save image before
running migrate command in virDomainSave impl. Call out to
security driver to set save image labelling
* src/security/security_driver.h: Add driver APIs for setting
and restoring saved state file labelling
* src/security/security_selinux.c: Implement saved state file
labelling for SELinux
Introduce a number of new APIs to expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.
* virDomainIsActive: Checking virDomainGetID is not reliable
since it is not possible to distinguish between error condition
and inactive domain for ID of -1.
* virDomainIsPersistent: Check whether a persistent config exists
for the domain
* virNetworkIsActive: Check whether the network is active
* virNetworkIsPersistent: Check whether a persistent config exists
for the network
* virStoragePoolIsActive: Check whether the storage pool is active
* virStoragePoolIsPersistent: Check whether a persistent config exists
for the storage pool
* virInterfaceIsActive: Check whether the host interface is active
* virConnectIsSecure: whether the communication channel to the
hypervisor is secure
* virConnectIsEncrypted: whether any network based commnunication
channels are encrypted
NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.
* include/libvirt/libvirt.h.in: Define public API
* src/driver.h: Define internal driver API
* src/libvirt.c: Implement public API entry point
* src/libvirt_public.syms: Export API symbols
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/interface/netcf_driver.c, src/network/bridge_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out driver tables
* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c
src/lxc/lxc_controller.c src/node_device/node_device_hal.c
src/openvz/openvz_conf.c src/qemu/qemu_driver.c
src/qemu/qemu_monitor_text.c src/remote/remote_driver.c
src/storage/storage_backend_disk.c src/storage/storage_driver.c
src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c
src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code
review and those are the fixes correcting the problems
Some monitor commands may take a very long time to complete. It is
not desirable to block other incoming API calls forever. With this
change, if an existing API call is holding the job lock, additional
API calls will not wait forever. They will time out after a short
period of time, allowing application to retry later.
* include/libvirt/virterror.h, src/util/virterror.c: Add new
VIR_ERR_OPERATION_TIMEOUT error code
* src/qemu/qemu_driver.c: Change to a timed condition variable
wait for acquiring the monitor job lock
QEMU monitor commands may sleep for a prolonged period of time.
If the virDomainObjPtr or qemu driver lock is held this will
needlessly block execution of many other API calls. it also
prevents asynchronous monitor events from being dispatched
while a monitor command is executing, because deadlock will
ensure.
To resolve this, it is neccessary to release all locks while
executing a monitor command. This change introduces a flag
indicating that a monitor job is active, and a condition
variable to synchronize access to this flag. This ensures that
only a single thread can be making a state change or executing
a monitor command at a time, while still allowing other API
calls to be completed without blocking
* src/qemu/qemu_driver.c: Release driver and domain lock when
running monitor commands. Re-add locking to disk passphrase
callback
* src/qemu/THREADS.txt: Document threading rules
Change the QEMU monitor file handle watch to poll for both
read & write events, as well as EOF. All I/O to/from the
QEMU monitor FD is now done in the event callback thread.
When the QEMU driver needs to send a command, it puts the
data to be sent into a qemuMonitorMessagePtr object instance,
queues it for dispatch, and then goes to sleep on a condition
variable. The event thread sends all the data, and then waits
for the reply to arrive, putting the response / error data
back into the qemuMonitorMessagePtr and notifying the condition
variable.
There is a temporary hack in the disk passphrase callback to
avoid acquiring the domain lock. This avoids a deadlock in
the command processing, since the domain lock is still held
when running monitor commands. The next commit will remove
the locking when running commands & thus allow re-introduction
of locking the disk passphrase callback
* src/qemu/qemu_driver.c: Temporarily don't acquire lock in
disk passphrase callback. To be reverted in next commit
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Remove
raw I/O functions, and a generic qemuMonitorSend() for
invoking a command
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Remove all low level I/O, and use the new qemuMonitorSend()
API. Provide a qemuMonitorTextIOProcess() method for detecting
command/reply/prompt boundaries in the monitor data stream
Use ssh keyfiles from the current user's home directory instead of trying
to use keyfiles from a hardcoded /home/user directory. Fallback to
username/password authentication if keyfiles are not available or keyfile
authentication failed.
Add reference counting on the virDomainObjPtr objects. With the
forthcoming asynchronous QEMU monitor, it will be neccessary to
release the lock on virDomainObjPtr while waiting for a monitor
command response. It is neccessary to ensure one thread can't
delete a virDomainObjPtr while another is waiting. By introducing
reference counting threads can make sure objects they are using
are not accidentally deleted while unlocked.
* src/conf/domain_conf.h, src/conf/domain_conf.c: Add
virDomainObjRef/Unref APIs, remove virDomainObjFree
* src/openvz/openvz_conf.c: replace call to virDomainObjFree
with virDomainObjUnref
In preparation of the monitor I/O process becoming fully asynchronous,
it is neccessary to ensure all access to internals of the qemuMonitorPtr
object is protected by a mutex lock.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add mutex for locking
monitor.
* src/qemu/qemu_driver.c: Add locking around all monitor commands
Change the QEMU driver to not directly invoke the text mode monitor
APIs. Instead add a generic wrapper layer, which will eventually
invoke either the text or JSON protocol code as needed. Pass an
qemuMonitorPtr object into the monitor APIs instead of virDomainObjPtr
to complete the de-coupling of the monitor impl from virDomainObj
data structures
* src/qemu/qemu_conf.h: Remove qemuDomainObjPrivate definition
* src/qemu/qemu_driver.c: Add qemuDomainObjPrivate definition.
Pass qemuMonitorPtr into all monitor APIs instead of the
virDomainObjPtr instance.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add thin
wrappers for all qemuMonitorXXX command APIs, calling into
qemu_monitor_text.c/h
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Rename qemuMonitor -> qemuMonitorText & update to accept
qemuMonitorPtr instead of virDomainObjPtr
Decouple the monitor code from the virDomainDefPtr structure
by moving the disk encryption lookup code back into the
qemu_driver.c file. Instead provide a function callback to
the monitor code which can be invoked to retrieve encryption
data as required.
* src/qemu/qemu_driver.c: Add findDomainDiskEncryption,
and findVolumeQcowPassphrase. Pass address of the method
findVolumeQcowPassphrase into qemuMonitorOpen()
* src/qemu/qemu_monitor.c: Associate a disk
encryption function callback with the qemuMonitorPtr
object.
* src/qemu/qemu_monitor_text.c: Remove findDomainDiskEncryption
and findVolumeQcowPassphrase.
Introduce a new qemuDomainObjPrivate object which is used to store
the private QEMU specific data associated with each virDomainObjPtr
instance. This contains a single member, an instance of the new
qemuMonitorPtr object which encapsulates the QEMU monitor state.
The internals of the latter are private to the qemu_monitor* files,
not to be shown to qemu_driver.c
* src/qemu/qemu_conf.h: Definition of qemuDomainObjPrivate.
* src/qemu/qemu_driver.c: Register a functions for creating
and freeing qemuDomainObjPrivate instances with the domain
capabilities. Remove the qemudDispatchVMEvent() watch since
I/O watches are now handled by the monitor code itself. Pass
a new qemuHandleMonitorEOF() callback into qemuMonitorOpen
to allow notification when the monitor quits.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Introduce
the 'qemuMonitor' object. Temporarily add new APIs
qemuMonitorWrite, qemuMonitorRead, qemuMonitorWaitForInput
to allow text based monitor impl to perform I/O.
* src/qemu/qemu_monitor_text.c: Call APIs for reading/writing
to monitor instead of accessing the file handle directly.
The qemu_driver.c code should not contain any code that interacts
with the QEMU monitor at a low level. A previous commit moved all
the command invocations out. This change moves out the code which
actually opens the monitor device.
* src/qemu/qemu_driver.c: Remove qemudOpenMonitor & methods called
from it.
* src/Makefile.am: Add qemu_monitor.{c,h}
* src/qemu/qemu_monitor.h: Add qemuMonitorOpen()
* src/qemu/qemu_monitor.c: All code for opening the monitor
* src/util/threads-pthread.c: pthreads APIs do not set errno, instead
the return value is the positive errno. Set errno based on the return
value in the wrappers
* src/util/pci.c, src/util/pci.h: Make the pciDeviceList struct
opaque to callers of the API. Add accessor methods for managing
devices in the list
* src/qemu/qemu_driver.c: Update to use APIs instead of directly
accessing pciDeviceList fields
As it was basically unimplemented and more confusing than useful
at the moment.
* src/libvirt_private.syms: remove from internal symbols list
* src/qemu/qemu_bridge_filter.c src/util/ebtables.c: remove code and
one use of the unimplemented function
In case of an error the domains hash and the driver mutex may leak.
* src/opennebula/one_driver.c: free/destroy domains hash and driver
mutex in error cases
- Make reading ID from file working for IDs > 127
- Fix inverse error check for writing ID to file
- Use feof() to distinguish EOF from real error of fread()
- Don't interpret libssh2 error codes as number of bytes
phypNumDomainsGeneric() and phypListDomainsGeneric() return 0 in case
of an error. This makes it impossible to distinguish between an actual
error and no domains being defined on the hypervisor. It also turn the
no domains situation into an error. Return -1 in case of an error to
fix this problem.
* src/network/bridge_driver.c: when exec'ing dnsmaq, if there are
DHCP ranges defined, then compute and pass the --dhcp-lease-max
deriving the maximum number of leases
* src/conf/network_conf.h: extend the structure to store the range
* src/conf/network_conf.c: before adding a range parse the IP addresses
do some checking and keep the size
* src/internal.h (ATTRIBUTE_SENTINEL): New, it's a ggc feature and
protected as such
* src/util/buf.c (virBufferStrcat): Use it.
* src/util/ebtables.c (ebtablesAddRemoveRule): Use it.
* src/util/iptables.c (iptableAddRemoveRule: Use it.
* src/util/qparams.h (new_qparam_set, append_qparams): Use it.
* docs/apibuild.py: avoid breaking the API generator with that new
internal keyword macro
* include/libvirt/virterror.h src/util/virterror.c: add a new error
VIR_ERR_CONFIG_UNSUPPORTED for valid but unsupported configuration options
* src/conf/domain_conf.c: Throw an error if guestfwd address isn't IPv4
and cleanup a number of parsing return error values.
allows the following to be specified in a domain:
<channel type='pipe'>
<source path='/tmp/guestfwd'/>
<target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>
* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
schemas and the parsing/serialization side for the new construct
QEmu support will add the following on the qemu command line:
-chardev pipe,id=channel0,path=/tmp/guestfwd
-net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0
* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
A character device's target (it's interface in the guest) had only a
single property: port. This patch is in preparation for adding targets
which require other properties.
Since this changes the conf type for character devices this affects
a number of drivers:
* src/conf/domain_conf.[ch] src/esx/esx_vmx.c src/qemu/qemu_conf.c
src/qemu/qemu_driver.c src/uml/uml_conf.c src/uml/uml_driver.c
src/vbox/vbox_tmpl.c src/xen/xend_internal.c src/xen/xm_internal.c:
target properties are moved into a union in virDomainChrDef, and a
targetType field is added to identify which union member should be
used. All current code which touches a virDomainChrDef is updated both
to use the new union field, and to populate targetType if necessary.
Current implementation of lxc driver creates vethN named
interface(s) in the host and passes as it is to a container.
The reason why it doesn't use ethN is due to the limitation
that one namespace cannot have multiple iterfaces that have
an identical name so that we give up creating ethN named
interface in the host for the container.
However, we should be able to allow the container to have
ethN by changing the name after clone(CLONE_NEWNET).
* src/lxc/lxc_container.c src/lxc/veth.c src/lxc/veth.h: do the clone
and then renames interfaces eth0 ... ethN to keep the interface names
familiar in the domain
* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c
src/lxc/veth.c: most of cleanups are just capitalizing their messages
though, some fixes wrong error messages and awkward indentations, and
improves error messages.
* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module
* configure.in: look for ebtables binary location if present
* src/Makefile.am: add the new module
* src/util/ebtables.[ch]: new module and internal APIs around
the ebtables binary
* src/libvirt_private.syms: export the symbols only internally
- Don't duplicate SystemError
- Use proper error code in domain_conf
- Fix a broken error call in qemu_conf
- Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)
All drivers have copy + pasted inadequate error reporting which wraps
util.c:virGetHostname. Move all error reporting to this function, and improve
what we report.
Changes from v1:
Drop the driver wrappers around virGetHostname. This means we still need
to keep the new conn argument to virGetHostname, but I think it's worth
it.
This patch updates the xml parsing and formatting, and the associated
virInterfaceDef data structure to support IPv6, along the way adding
support for multiple protocols per interface, and multiple IP
addresses per protocol.
* src/conf/interface_conf.[ch]: update the structures, code for parsing
and serialization
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to
virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the
live interface info will be returned in the XML (in particular, the IP
address(es) and netmask(s) will be retrieved by querying the interface
directly, rather than reporting what's in the config file). The
backend of this is in netcf's ncf_if_xml_state() function.
* configure.in libvirt.spec.in: requires netcf >= 0.1.3
* include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE
* src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c:
update the parsing and backend routines accordingly
* tools/virsh.c: change interface edit to inactive definition and
adds the inactive flag for interface dump
The minimal XML returned from ncf_if_xml_state() doesn't contain this
attribute (which makes no sense in the case of reporting current
status of the interface), and it was preventing it from passing
through the parse/format step.
* src/conf/interface_conf.[ch]: add a new virInterfaceStartMode value
and modify loading/saving accordingly
There are places where an interface will not have a mac address, and netcf
returns this as a NULL pointer rather than a pointer to an empty string.
Rather than checking for this all over the place in libvirt, just save it
in the virInterface object as an empty string.
* src/datatypes.c: allow NULL mac in virGetInterface()
introduced on commit 9231aa7d95
* src/qemu/qemu_driver.c: in qemudRemoveDomainStatus fix a reference
to an undefined variable buf and free up an allocated string
When building with --disable-nls, I got a few messages like this:
storage/storage_backend.c: In function 'virStorageBackendCreateQemuImg':
storage/storage_backend.c:571: warning: format not a string literal and no format arguments
Fix these up.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
qemudShutdownVMDaemon() calls qemudRemoveDomainStatus(), which
then calls virFileDeletePID(). qemudShutdownVMDaemon() then
unnecessarily calls virFileDeletePID() again. Remove this second
usage of it, and also slightly refactor qemudRemoveDomainStatus()
to VIR_WARN appropriate error messages.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The LXC driver was mistakenly returning -1 for lxcStartup()
in scenarios that are not an error. This caused the libvirtd
to quit for unprivileged users. This fixes the return code
of LXC driver, and also adds a "name" field to the virStateDriver
struct and logging to make it easier to find these problems
in the future
* src/driver.h: Add a 'name' field to state driver to allow
easy identification during failures
* src/libvirt.c: Log name of failed driver for virStateInit
failures
* src/lxc/lxc_driver.c: Don't return a failure code for
lxcStartup() if LXC is not available on this host, simply
disable the driver.
* src/network/bridge_driver.c, src/node_device/node_device_devkit.c,
src/node_device/node_device_hal.c, src/opennebula/one_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/secret/secret_driver.c, src/storage/storage_driver.c,
src/uml/uml_driver.c, src/xen/xen_driver.c: Fill in name
field in virStateDriver struct
If an error occurs between the allocation of an item and appending it
to the list, the item leaks. Free such orphaned items in error cases.
* src/esx/esx_vi.c: free orphaned items in error cases
The default transport for the VI API is HTTPS. If the server redirects
from HTTPS to HTTP the driver would silently follow that redirection.
The user assumes to communicate with the server over a secure transport
but isn't.
This patch disables automatical redirection following. The driver reports
an error if the server tries to redirect.
* src/esx/esx_vi.c: refactor the call to curl_easy_perform() into a
function and do error handling there, disable automatical redirection
following for curl
* src/esx/esx_vi.h: change the type of responseCode to int
Unified function naming scheme:
- 'lookup' functions query the ESX or vCenter for information
- 'get' functions return information from a local object
* src/esx/esx_driver.c, src/esx/esx_vi.[ch]: unify function naming
In order to register a new virtual machine the ESX driver needs to upload
a VMX file to a datastore. Try to put this file beside the main VMDK file
of the virtual machine. Change the disk selection for datastore detection
to choose the first file-based harddisk instead of just the first disk.
The first disk may be a CDROM disk and ISO images are normaly not located
in the virtual machine's directory.
* src/esx/esx_driver.c: change disk selection for datastore detection
This allows to use domain-xml-from-native with VMX files that reference
unavailable datastores.
* src/esx/esx_vmx.c: fallback to the preliminary name if the datastore
cannot be found
Rename virDomainIsActive to virDomainObjIsActive, and
virInterfaceIsActive to virInterfaceObjIsActive and finally
virNetworkIsActive to virNetworkObjIsActive.
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/interface_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/lxc/lxc_driver.c,
src/network/bridge_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c: Update for
renamed APIs.
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this
* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
The virDomainObjPtr object stores state about a running domain.
This object is shared across all drivers so it is not appropriate
to include driver specific state here. This patch adds the ability
to request a blob of private data per domain object instance. The
driver must provide a allocator & deallocator for this purpose
THis patch abuses the virCapabilitiesPtr structure for storing the
allocator/deallocator callbacks, since it is already being abused
for other internal things relating to parsing. This should be moved
out into a separate object at some point.
* src/conf/capabilities.h: Add privateDataAllocFunc and
privateDataFreeFunc fields
* src/conf/domain_conf.c: Invoke the driver allocators / deallocators
when creating/freeing virDomainObjPtr instances.
* src/conf/domain_conf.h: Pass virCapsPtr into virDomainAssignDef
to allow access to the driver specific allocator function
* src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c: Update for
change in virDomainAssignDef contract
__in6_u.__u6_addr16 is the private name for this struct member,
s6_addr16 is the public one
* src/util/network.c: dont use the private field, but the public one.
John Levon raised the issue that remoteIOEventLoop() poll call was
reissued after EINTR was caught making it uninterruptible.
* src/remote/remote_driver.c: catch EAGAIN instead as suggested by
Richard Jones
The current virDomainObjListPtr object stores domain objects in
an array. This means that to find a particular objects requires
O(n) time, and more critically acquiring O(n) mutex locks.
The new impl replaces the array with a virHashTable, keyed off
UUID. Finding a object based on UUID is now O(1) time, and only
requires a single mutex lock. Finding by name/id is unchanged
in complexity.
In changing this, all code which iterates over the array had
to be updated to use a hash table iterator function callback.
Several of the functions which were identically duplicating
across all drivers were pulled into domain_conf.c
* src/conf/domain_conf.h, src/conf/domain_conf.c: Change
virDomainObjListPtr to use virHashTable. Add a initializer
method virDomainObjListInit, and rename virDomainObjListFree
to virDomainObjListDeinit, since its not actually freeing
the container, only its contents. Also add some convenient
methods virDomainObjListGetInactiveNames,
virDomainObjListGetActiveIDs and virDomainObjListNumOfDomains
which can be used to implement the correspondingly named
public API entry points in drivers
* src/libvirt_private.syms: Export new methods from domain_conf.h
* src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_conf.c, src/openvz/openvz_driver.c,
src/qemu/qemu_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c: Update all code
to deal with hash tables instead of arrays for domains
We need to parse a source XML block for FindPoolSources, so this is a step
in sharing the parsing. The new storage pool XML 2 XML tests cover this area
pretty well to ensure we aren't causing regressions.
This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.
This can be used to forward the BOOTP settings of the host down to the
guest. This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.
* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
tests/networkxml2xmlout/netboot-proxy-network.xml
tests/networkxml2xmltest.c: add new tests
In xenInotifyXendDomainsDirLookup() the wrong UUID variable is used
to search in the config info list.
In xenInotifyEvent() the event is dispatched if it's NULL.
Both were introduced in bc898df2c7.
We should always be using virGetHostname in place of
gethostname; thus add in a new syntax-check rule to make
sure no new uses creep in.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
We can slightly tighten up the regex's used to detect the use of
nonreentrant functions. We can also check src/util/virterror.c
by modifying a comment; I think it's worth it to get the additional
coverage.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
xenUnifiedDomainEventRegister() calls out to
virDomainEventCallbackListAdd(), which increments the reference
count on the connection. That is fine, but then
xenUnifiedDomainEventRegister() increments the usage count again,
leading to a usage count leak. Remove the increment in the xen
register, and the UnrefConnect in the xen unregister.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
If no matching device was found (cap == NULL) then no strdup() call
was made and *wwnn and *wwpn are untouched. Checking them for NULL
in this situation may result in reporting an false-positive OOM error
because *wwnn and *wwpn may be initialized to NULL by the caller.
Only check *wwnn and *wwpn for NULL if a matching device was found
(cap != NULL) and thus strdup() was called.
* src/conf/node_device_conf.c: only report an OOM error if there
really is one
virXPathNodeSet() could return -1 when doing an evaluation failure
due to xmlXPathEval() from libxml2 behaviour.
* src/util/xml.c: make sure we always return 0 unless the returned
XPath type is of the wrong type (meaning the query passed didn't
evaluate to a node set and code must be fixed)
https://bugzilla.redhat.com/show_bug.cgi?id=528575
virsh -c lxc:/// autostart vm1
was crashing the daemon
* src/lxc/lxc_conf.h src/lxc/lxc_conf.c: initialize the driver
autostartDir to avoid a NULL reference and implement autostart for LXC
Currently MAC address configuration of container veth is just ignored.
This patch implements the missing feature.
* src/lxc/veth.c, src/lxc/veth.h: add setMacAddr
* src/lxc/lxc_driver.c: set macaddr of container veth if specified
Most of the hash iterators need to modify either payload of
data args. The const annotation prevents this.
* src/util/hash.h, src/util/hash.c: Remove const-ness from
virHashForEach/Iterator
* src/xen/xm_internal.c: Remove bogus casts
A cgroup file returns integer value terminated with '\n' and remaining
it has sometimes harmful effects, for example it leads virStrToLong_ull
to fail.
* src/util/cgroup.c: strip out terminating \n when reading a value
If the the qemu and kvm binaries are the same, we don't include machine
types in the kvm domain info.
However, the code which refreshes the machine types info from the
previous capabilities structure first looks at the kvm domain's info,
finds it matches and then copies the empty machine types list over
for the top-level qemu domain.
That doesn't make sense, we shouldn't copy an empty machin types list.
* src/qemu/qemu_conf.c: qemudGetOldMachinesFromInfo(): don't copy an
empty machine types list.
* src/util/buf.c: if virBufferEscapeString was called on a buffer that
had 0 bytes of space, a size of -1 will be passed to snprintf, resulting
in a segmentation fault, this preallocate some space.
* src/conf/storage_conf.c src/conf/storage_conf.h: extend the enums
and values
* docs/schemas/storagepool.rng: add to the list of storage pool type
formats
Normally, when you migrate a domain from host A to host B,
the domain on host A remains defined but shutoff and the domain
on host B remains running but is a "transient". Add a new
flag to virDomainMigrate() to allow the original domain to be
undefined on source host A, and a new flag to virDomainMigrate() to
allow the new domain to be persisted on the destination host B.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When specifying bridge delay via network XML define, we were looking for
the 'delay' attribute, but would dump the value as 'forwardDelay'. Have
the output match the expected input (and schema).
The fread_file_lim() function uses fread() but never handles
EINTR results, causing unexpected failures when reading QEMU
help arg info. It was unneccessarily using FILE * instead
of plain UNIX file handles, which prevented use of saferead()
* src/util/util.c: Switch fread_file_lim over to use saferead
instead of fread, remove FILE * use, and rename
$ sudo virsh pool-start idontexist
10:58:18.716: warning : processCallDispatchReply:7612 : Method call error
error: failed to get pool 'idontexist'
error: Storage pool not found: no pool with matching name 'idontexist'
That warning doesn't server much purpose being printed via a virsh call. So
remove the message.
The logic for running the decompression programs was broken in
commit f238709304, so that for
non-raw formats the decompression program was never run, and
for raw formats, it tried to exec an argv[] with initial NULL
in the program name.
* src/qemu/qemu_driver.c: Fix logic in runing decompression program
If one has e.g.
<guest>
<os_type>hvm</os_type>
<arch name='x86_64'>
<wordsize>64</wordsize>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<machine>pc-0.11</machine>
<machine canonical='pc-0.11'>pc</machine>
<machine>pc-0.10</machine>
<machine>isapc</machine>
<domain type='qemu'>
</domain>
<domain type='kvm'>
<emulator>/usr/bin/kvm</emulator>
<machine>pc</machine>
<machine>isapc</machine>
</domain>
</arch>
</guest>
and start a guest with:
<domain type='kvm'>
...
<os>
<type arch='x86_64'>hvm</type>
...
</os>
</domain>
then the default machine type should be 'pc' and not 'pc-0.11'
Issue was reported by Anton Protopopov.
* src/capabilities.[ch]: pass the domain type to
virCapabilitiesDefaultGuestArch() and use it to look up the default
machine type from a specific guest domain if needed.
* src/conf/domain_conf.c, src/xen/xm_internal.c: update
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.xml: update
the domain type to 'kvm' and remove the machine type to check
that the default gets looked up correctly
Introduces several new public API options for migration
- VIR_MIGRATE_PEER2PEER: With this flag the client only
invokes the virDomainMigratePerform method, expecting
the source host driver to do whatever is required to
complete the entire migration process.
- VIR_MIGRATE_TUNNELLED: With this flag the actual data
for migration will be tunnelled over the libvirtd RPC
channel. This requires that VIR_MIGRATE_PEER2PEER is
also set.
- virDomainMigrateToURI: This is variant of the existing
virDomainMigrate method which does not require any
virConnectPtr for the destination host. Given suitable
driver support, this allows for all the same modes as
virDomainMigrate()
The URI for VIR_MIGRATE_PEER2PEER must be a valid libvirt
URI. For non-p2p migration a hypervisor specific migration
URI is used.
virDomainMigrateToURI without a PEER2PEER flag is only
support for Xen currently, and it involves XenD talking
directly to XenD, no libvirtd involved at all.
* include/libvirt/libvirt.h.in: Add VIR_MIGRATE_PEER2PEER
flag for migration
* src/libvirt_internal.h: Add feature flags for peer to
peer migration (VIR_FEATURE_MIGRATE_P2P) and direct
migration (VIR_MIGRATE_PEER2PEER mode)
* src/libvirt.c: Implement support for VIR_MIGRATE_PEER2PEER
and virDomainMigrateToURI APIs.
* src/xen/xen_driver.c: Advertise support for DIRECT migration
* src/xen/xend_internal.c: Add TODO item for p2p migration
* src/libvirt_public.syms: Export virDomainMigrateToURI
method
* src/qemu/qemu_driver.c: Add support for PEER2PEER and
migration, and adapt TUNNELLED migration.
* tools/virsh.c: Add --p2p and --direct args and use the
new virDomainMigrateToURI method where possible.
Re-arrange the doTunnelMigrate method putting all non-QEMU local
state setup steps first. This maximises chances of success before
then starting destination QEMU for receiving incoming migration.
Altogether this can reduce the number of goto cleanup labels to
something more managable.
* qemu/qemu_driver.c: Re-order steps in doTunnelMigrate
Simplify the doTunnelMigrate code by pulling out the code for
sending all tunnelled data into separate helper
* qemu/qemu_driver.c: introduce doTunnelSendAll() method
Simplify the doTunnelMigrate() method by pulling out the code
which opens/closes the virConnectPtr object into a parent
method
* qemu/qemu_driver.c: Add doPeer2PeerMigrate which then calls
doTunnelMigrate with dconn & dom_xml
virStreamAbort is needed when the caller wishes to terminate
the stream early, not when virStreamSend fails.
* qemu/qemu_driver.c: Fix calling of virStreamAbort during
tunnelled migration
The code for tunnelled migration was added in a dedicated method,
but the native migration code is still inline in the top level
qemudDomainMigratePerform() API. Move the native code out into
a dedicated method too to make things more maintainable.
* src/qemu/qemu_driver.c: Pull code for performing a native
QEMU migration out into separate method
The code for tunnelled migration wierdly required the app to pass
a NULL 'dconn' parameter, only to have to use virConnectOpen
itself shortly thereafter to get a 'dconn' object. Remove this
bogus check & require the app to always pas 'dconn' as before
* src/libvirt.c: Require 'dconn' for virDomainMigrate calls again
and remove call to virConnectOpen
Since virMigratePrepareTunnel() is used for migration over the
native libvirt connection, there is never any need to pass the
target URI to this method.
* daemon/remote.c, src/driver.h, src/libvirt.c, src/libvirt_internal.h,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/remote/remote_protocol.c, src/remote/remote_protocol.h,
src/remote/remote_protocol.x: Remove 'uri_in' parameter from
virMigratePrepareTunnel() method
Move the VIR_DRV_FEATURE* constants into libvirt_internal.h
since these flags are indicating whether APIs in the
libvirt_internal.h file are supported by a driver
* src/driver.h: Remove VIR_DRV_FEATURE* constants
* src/libvirt_internal.h: Add VIR_DRV_FEATURE* constants, using
an enum instead of #define
* src/internal.h: pull in libvirt_internal.h
* src/lxc/lxc.conf: new configuration file, there is currently one
tunable "log_with_libvirtd" that controls whether an lxc controller will
log only to the container log file, or whether it will honor libvirtd's
log output configuration. This provides a way to have libvirtd and its
children log to a single file. The default is to log to the container
log file.
* src/Makefile.am libvirt.spec.in: add the new file
* src/lxc/lxc_conf.[ch] src/lxc/lxc_driver.c: read the new log value
from the configuration file and pass the log informations when
starting up a container.
* src/lxc/lxc_driver.c src/lxc/lxc_controller.c: before launching the
lxc controller, have the lxc driver query the log settings and setup
envp[]. This provides the advantage of honoring the actual log
configuration instead of only what had been set in the environment.
The lxc controller now simply has to call virLogSetFromEnv().
When configuring logging settings, keep more information about the
output destination. Add accessors to retrieve the filter and output
settings in the original string form; this to be used to set up
environment for a child process that also logs.
* src/util/logging.[ch]: add virLogGetFilters and virLogGetOutputs
accessors and modify the internals (including virLogDefineOutput())
to save the data needed for the accessors
* src/util/util.[ch]: Add virFileAbsPath() function to ensure an
absolute path for a potentially realtive path.
* src/libvirt_private.syms: add it in libvirt private symbols
* configure.in: look for AppArmor and devel
* src/security/security_apparmor.[ch] src/security/security_driver.c
src/Makefile.am: add and plug the new driver
* src/security/virt-aa-helper.c: new binary which is used exclusively by
the AppArmor security driver to manipulate AppArmor.
* po/POTFILES.in: registers the new files
* tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test:
tests for virt-aa-helper and the security driver, secaatest.c is
identical to seclabeltest.c except it initializes the 'apparmor'
driver instead of 'selinux'
The patch implements the missing memory control APIs for lxc, i.e.,
domainGetMaxMemory, domainSetMaxMemory, domainSetMemory, and improves
domainGetInfo to return proper amount of used memory via cgroup.
* src/libvirt_private.syms: Export virCgroupGetMemoryUsage
and add missing virCgroupSetMemory
* src/lxc/lxc_driver.c: Implement missing memory functions
* src/util/cgroup.c, src/util/cgroup.h: Add the function
to get used memory
When James Morris originally submitted his sVirt patches (as seen in
libvirt 0.6.1), he did not require on disk labelling for
virSecurityDomainRestoreImageLabel. A later commit[2] changed this
behavior to assume on disk labelling, which halts implementations for
path-based MAC systems such as AppArmor and TOMOYO where
vm->def->seclabel is required to obtain the label.
* src/security/security_driver.h src/qemu/qemu_driver.c
src/security/security_selinux.c: adds the 'virDomainObjPtr vm'
argument back to *RestoreImageLabel
Add virNodeDeviceParseFile, and make virNodeDeviceParseNode non-static. These
will be used by the test driver.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a simple 'computer' device for the default driver. Only implement
the basic calls, no creation or destroy happening.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Fix migration, broken in two different ways by the QEMU monitor
abstraction. Note that the QEMU console emits a "\r\n" as the
line-ending.
* src/qemu/qemu_monitor_text.c (qemuMonitorGetMigrationStatus):
Fix "info migrate" command and its output's parsing.
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The upcoming tunnelled migration needs to be able to set
a migration in progress in the background, as well as
be able to cancel a migration when a problem has happened.
This patch allows for both of these to properly work.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
A simple misplaced break out of a switch results in:
libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./vendor': No such file or directory
libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./device': No such file or directory
libvir: error : this function is not supported by the hypervisor: Failed to read product/vendor ID for 0000:00:54c.
when trying to passthrough a USB host device to qemu.
* src/security_selinux.c: fix a switch/break thinko
* src/conf/domain_conf.c: a simple typo in an XML domain file could lead
to a crash, because we called STRPREFIX() on the looked up value without
checking it was non-null.
* src/conf/domain_conf.c: when declaring a <interface type="bridge">
tag, <source> needs a "bridge" attribute, but the parser complains
about a missing "dev" attribute.
* docs/schemas/domain.rng: allow one <description> tag in the top level
of the <domain> to store user information as text
* src/conf/domain_conf.c src/conf/domain_conf.h: extend the structure
to store this text, grab it at parse time and save it back when
present after <uuid>
Function comments for virStreamEvent{Add,Update,Remove}Callback() are
missing a trailing ':'. Therefore apibuild.py fails to parse the comment
and warns about the missing ':'.
* docs/libvirt-api.xml, docs/libvirt-refs.xml: updated by apibuild.py
* src/libvirt.c: add missing ':' in function comments
Use virStorageFileGetMetadata() to find any backing stores for images
and re-label them
Without this, qemu cannot access qcow2 backing files, see:
https://bugzilla.redhat.com/497131
* src/security/security_selinux.c: re-label backing store files in
SELinuxSetSecurityImageLabel()
Finally, we get to the point of all this.
Move virStorageGetMetadataFromFD() to virStorageFileGetMetadataFromFD()
and move to src/util/storage_file.[ch]
There's no functional changes in this patch, just code movement
* src/storage/storage_backend_fs.c: move code from here ...
* src/util/storage_file.[ch]: ... to here
* src/libvirt_private.syms: export virStorageFileGetMetadataFromFD()
Introduce a metadata structure and make virStorageGetMetadataFromFD()
fill it in.
* src/util/storage_file.h: add virStorageFileMetadata
* src/backend/storage_backend_fs.c: virStorageGetMetadataFromFD() now
fills in the virStorageFileMetadata structure
Prepare the code probing a file's format and associated metadata for
moving into libvirt_util.
* src/storage/storage_backend_fs.c: re-factor the format and metadata
probing code in preparation for moving it
Rename virStorageVolFormatFileSystem to virStorageFileFormat and
move to src/util/storage_file.[ch]
* src/Makefile.am: add src/util/storage_file.[ch]
* src/conf/storage_conf.[ch]: move enum from here ...
* src/util/storage_file.[ch]: .. to here
* src/libvirt_private.syms: update To/FromString exports
* src/storage/storage_backend.c, src/storage/storage_backend_fs.c,
src/vbox/vbox_tmpl.c: update for above changes
When using VNC for graphics + keyboard + mouse, we shouldn't
then use the host OS for audio. Audio should go back over
VNC.
When using SDL for graphics, we should use the host OS for
audio since that's where the display is. We need to allow
certain QEMU env variables to be passed through to guest
too to allow choice of QEMU audio backend.
* qemud/libvirtd.sysconf: Mention QEMU/SDL audio env vars
* src/qemu_conf.c: Passthrough QEMU/SDL audio env for SDL display,
disable host audio for VNC display
Defines the extensions to the remote protocol for generic
data streams. Adds a bunch of helper code to the libvirtd
daemon for working with data streams.
* daemon/Makefile.am: Add stream.c/stream.h to build
* daemon/stream.c, qemud/stream.h: Generic helper functions for
creating new streams, associating streams with clients, finding
existing streams for a client and removing/deleting streams.
* src/remote/remote_protocol.x: Add a new 'REMOTE_STREAM' constant
for the 'enum remote_message_type' for encoding stream data
in wire messages. Add a new 'REMOTE_CONTINUE' constant to
'enum remote_message_status' to indicate further data stream
messsages are expected to follow. Document how the
remote_message_header is used to encode data streams
* src/remote/remote_protocol.h: Regenerate
* daemon/dispatch.c: Remove assumption that a error message
sent to client is always type=REMOTE_REPLY. It may now
also be type=REMOTE_STREAM. Add convenient method for
sending outgoing stream data packets. Log and ignore
non-filtered incoming stream packets. Add a method for
serializing a stream error message
* daemon/dispatch.h: Add API for serializing stream errors
and sending stream data packets
* daemon/qemud.h: Add struct qemud_client_stream for tracking
active data streams for clients. Tweak filter function
operation so that it accepts a client object too.
* daemon/qemud.c: Refactor code for free'ing message objects
which have been fully transmitted into separate method.
Release all active streams when client shuts down. Change
filter function to be responsible for queueing the message
* include/libvirt/libvirt.h.in: Public API contract for
virStreamPtr object
* src/libvirt_public.syms: Export data stream APIs
* src/libvirt_private.syms: Export internal helper APIs
* src/libvirt.c: Data stream API driver dispatch
* src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr
object
* src/driver.h: Define internal driver API for streams
* .x-sc_avoid_write: Ignore src/libvirt.c because it trips
up on comments including write()
* python/Makefile.am: Add libvirt-override-virStream.py
* python/generator.py: Add rules for virStreamPtr class
* python/typewrappers.h, python/typewrappers.c: Wrapper
for virStreamPtr
* docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate
with new APIs
* src/qemu/qemu_monitor_text.c: Always print command and reply
in qemuMonitorCommandWithHandler. Print all args in each monitor
command API & remove redundant relpy printing
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new
qemuMonitorRemoveHostNetwork() command for removing host
networks
* src/qemu/qemu_driver.c: Convert NIC hotplug methods over
to use qemuMonitorRemoveHostNetwork()
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Remove prefix arg
from qemuBuildHostNetStr which is no longer required
* src/qemu/qemu_driver.c: Refactor to use qemuMonitorAddHostNetwork()
API for adding host network
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddHostNetwork() method for adding host networks
* src/qemu/qemu_conf.c: Remove separator from qemuBuildNicStr()
args, and remove hardcoded 'nic' prefix. Leave it upto callers
instead
* src/qemu/qemu_driver.c: Switch over to using the new
qemuMonitorAddPCINetwork() method for NIC hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddPCINetwork API for PCI network device hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
APIs for processing file handles
* src/qemu/qemu_driver.c: Convert NIC hotplug method over to
use qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
API qemuMonitorAddPCIDisk()
* src/qemu/qemu_driver.c: Convert over to using the new
qemuMonitorAddPCIDisk() method, and remove now obsolete
qemudEscape() method
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API
qemuMonitorRemovePCIDevice() for removing PCI device
* src/qemu/qemu_driver.c: Convert all places removing PCI devices
over to new qemuMonitorRemovePCIDevice() API
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
API qemuMonitorAddPCIHostDevice()
* src/qemu/qemu_driver.c: Switch to using qemuMonitorAddPCIHostDevice()
for PCI host device hotplug
One API adds an exact device based on bus+dev, the other adds
any device matching vendor+product
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()
commands.
* src/qemu/qemu_driver.c: Switch over to using the new
qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddUSBDisk() API
* src/qemu/qemu_driver.c: Switch USB disk hotplug to the new
src/qemu/qemu_driver.c API.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorMigrateToCommand() API
* src/qemu/qemu_driver.c: Switch over to using the
qemuMonitorMigrateToCommand() API for core dumps and save
to file APIs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API
qemuMonitorMigrateToHost() for doing TCP migration
* src/qemu/qemu_driver.c: Convert to use qemuMonitorMigrateToHost().
Also handle proper URIs (tcp:// as well as tcp:)
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorGetMigrationStatus() command.
* src/qemu/qemu_driver.c: Use new qemuMonitorGetMigrationStatus()
command to check completion status.
* src/qemu/qemu_driver.c: Use new qemuMonitorSetMigrationSpeed()
API during migration
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new
qemuMonitorSetMigrationSpeed() API
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new
qemuMonitorGetBlockStatsInfo() command
* src/qemu/qemu_driver.c: Remove directly use of blockstats in
favour of calling qemuMonitorGetBlockStatsInfo()
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new APIs
qemuMonitorSaveVirtualMemory() and qemuMonitorSavePhysicalMemory()
* src/qemu/qemu_driver.c: Use the new qemuMonitorSaveVirtualMemory()
and qemuMonitorSavePhysicalMemory() APIs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new APis
qemuMonitorChangeMedia and qemuMonitorEjectMedia. Pull in code
for qemudEscape
* src/qemu/qemu_driver.c: Remove code that directly issues 'eject'
and 'change' commands in favour of API calls.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorSetBalloon() based on existing code in
qemudDomainSetMemoryBalloon
* src/qemu/qemu_driver.c: Remove use of qemudDomainSetMemoryBalloon()
in favour of qemuMonitorSetBalloon(). Fix error code when balloon
is not supported
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Pull old
qemudDomainGetMemoryBalloon() code into a new method called
qemuMonitorGetBalloonInfo()
* src/qemu/qemu_driver.c: Update to call qemuMonitorGetBalloonInfo()
and remove qemudDomainGetMemoryBalloon().
* src/qemu/qemu_driver.c: Remove use of 'system_powerdown'
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new
qemuMonitorSystemPowerdown() api call
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new
qemuMonitorStopCPUs() API
* src/qemu/qemu_driver.c: Replace direct monitor commands for 'stop'
with qemuMonitorStopCPUs()
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Rename
Rename qemudMonitorSendCont to qemuMonitorStartCPUs
* src/qemu/qemu_driver.c: Update callers for new name
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a
new qemuMonitorSetVNCPassword() API
* src/qemu/qemu_driver.c: Refactor qemudInitPasswords to
call qemuMonitorSetVNCPassword()
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new
qemuMonitorGetCPUInfo() command
* src/qemu/qemu_driver.c: Refactor qemudDetectVcpuPIDs to
use qemuMonitorGetCPUInfo()
Pull out all the QEMU monitor interaction code to a separate
file. This will make life easier when we need to drop in a
new implementation for the forthcoming QMP machine friendly
monitor support.
Next step is to add formal APIs for each monitor command,
and remove direct commands for sending/receiving generic
data.
* src/Makefile.am: Add qemu_monitor.c to build
* src/qemu/qemu_driver.c: Remove code for monitor interaction
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: New
file for monitor interaction
* po/POTFILES.in: Add src/qemu/qemu_monitor_text.c
* src/conf/interface_conf.c: This was causing subsequent calls to
virXPathxxx() to fail, since ctxt->node was left pointing at the
dhcp node, rather than the protocol node.
* src/util/xml.c: The virXPath... function take extra care to preserve
the XPath context node (ctxt->node) but in the case of virXPathString
and virXPathBoolean they forgot to do this on the error path. This
patch fixes this and move all ctxt->node = relnode instuctions just
after the xmlXPathEval() to make sure this doesn't happen if this code
is modified.
The python method help docs are copied across from the C
funtion comments, but in the process all line breaks and
indentation was being lost. This made the resulting text
and code examples completely unreadable. Both the API
doc extractor and the python generator were destroying
whitespace & this fixes them to preserve it exactly.
* docs/apibuild.py: Preserve all whitespace when extracting
function comments. Print function comment inside a <![CDATA[
section to fully preserve all whitespace. Look for the
word 'returns' to describe return values, instead of 'return'
to avoid getting confused with code examples including the
C 'return' statement.
* python/generator.py: Preserve all whitespace when printing
function help docs
* src/libvirt.c: Change any return parameter indicated by
'return' to be 'returns', to avoid confusing the API extractor
* docs/libvirt-api.xml: Re-build for fixed descriptions
An inaccessible datastore has no valid URL property so don't
access its URI property.
* src/esx/esx_vi.c: esxVI_LookupDatastoreByName(): check if datastore is
accessible before accessing its URL property
* src/esx/esx_vmx.c: update to changed datastore properties
A given domain XML gets converted to a VMX config, uploaded to the host
and registered as new virtual machine.
* src/esx/esx_driver.c: refactor datastore related path parsing into
esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_util.[ch]: add esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_vi.[ch]: add esxVI_Context_UploadFile(), add datastores to
the traversal in esxVI_BuildFullTraversalSpecList(), add
esxVI_LookupDatastoreByName()
* src/esx/esx_vi_methods.[ch]: add esxVI_RegisterVM_Task()
* src/esx/esx_vi_types.c: make some error message more verbose
* src/esx/esx_vmx.[ch]: add esxVMX_AbsolutePathToDatastoreRelatedPath()
to convert a path into a datastore related path, add esxVMX_ParseFileName()
to convert from VMX path format to domain XML path format, extend the other
parsing function to be datastore aware, add esxVMX_FormatFileName() to
convert from domain XML path format to VMX path format, fix VMX ethernet
entry formating
* tests/esxutilstest.c: add test for esxUtil_ParseDatastoreRelatedPath()
* tests/vmx2xmldata/*: update domain XML files to use datastore related paths
* tests/xml2vmxdata/*: update domain XML files to use datastore related paths,
update VMX files to use absolute paths
Add esxVI_Occurence enum to describe expected occurence of items
* src/esx/esx_driver.c: update the use of esxVI_LookupVirtualMachineByUuid()
* src/esx/esx_vi.c: add an esxVI_Occurence parameter to
esxVI_LookupVirtualMachineByUuid() and take care if esxVI_FindByUuid()
can't find anything for a given uuid
* src/esx/esx_vi.h: add esxVI_Occurence enum
* src/esx/esx_vi_methods.c: expect null or more items to be returned
from esxVI_FindByUuid()
* src/esx/esx_driver.c: add esxSupportsLongMode() and update esxCapsInit()
* src/esx/esx_vi.[ch]: Add AnyType handling for lists
* src/esx/esx_vi_types.c: bind VI type HostCpuIdInfo
Extend and cleanup the VMX to domain XML mapping. Add the domain XML to
VMX mapping functions.
* src/esx/esx_driver.c: add esxDomainXMLToNative()
* src/esx/esx_vmx.[ch]: add esxVMX_SCSIDiskNameToControllerAndID(),
esxVMX_IDEDiskNameToControllerAndID(), esxVMX_FloppyDiskNameToController(),
esxVMX_GatherSCSIControllers(), add basic handling for the VMX guestOS entry
to distinguish between i686 and x86_64, make SCSI virtualDev VMX entry
optional as it should be, map the VMX networkName entry to the domain XML
interface bridge name, add basic mapping for serial devices in pipe mode,
add several esxVMX_Format*() functions
This enables the auth callback to automatically distinguish between
requests for ESX host and vCenter credentials.
* src/esx/esx_util.[ch]: set challenge for auth callback to hostname
* src/esx/esx_driver.c: add esxNodeGetFreeMemory(), cache IP address
* src/esx/esx_vi.[ch]: refactor resource pool query into esxVI_GetResourcePool()
* src/esx/esx_vi_types.[ch]: bind VI type ResourcePoolResourceUsage
Currently, libvirtd will start a dnsmasq process for the virtual
network, but (aside from killing the dnsmasq process and replacing it),
there's no way to define tftp boot options.
This change introduces the appropriate tags to the dhcp configuration:
<network>
<name>default</name>
<bridge name="virbr%d" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<tftp root="/var/lib/tftproot" />
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
<bootp file="pxeboot.img"/>
</dhcp>
</ip>
</network>
When the attributes are present, these are passed to the
arguments to dnsmasq:
dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
from <tftp /> from <bootp />
At present, only local tftp servers are supported (ie, dnsmasq runs as
the tftp server), but we could improve this in future by adding a
server= attribute.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2009-09-21 Paolo Bonzini <pbonzini@redhat.com>
Jeremy Kerr <jk@ozlabs.org>
* docs/formatnetwork.html.in: Document new tags.
* docs/formatnetwork.html: Regenerate.
* docs/schemas/network.rng: Update.
* src/network_conf.c (virNetworkDefFree): Free new fields.
(virNetworkDHCPRangeDefParseXML): Parse <bootp>.
(virNetworkIPParseXML): New, parsing <dhcp> and <tftp>.
(virNetworkDefParseXML): Use virNetworkIPParseXML instead of
virNetworkDHCPRangeDefParseXML.
(virNetworkDefFormat): Pretty print new fields.
* src/network_conf.h (struct _virNetworkDef): Add netboot fields.
* src/network_driver.c (networkBuildDnsmasqArgv): Add
TFTP and BOOTP arguments.
* tests/Makefile.am (EXTRA_DIST): Add networkschemadata.
* tests/networkschematest: Look in networkschemadata.
* tests/networkschemadata/netboot-network.xml: New.
Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string. If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL. Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string. This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen
* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
-domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
-boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params
The commit cb51aa48a7 "Fix up connection
reference counting." changed the driver closing and virConnectPtr
unref-logic in virConnectClose().
Before this commit virConnectClose() closed all drivers of the given
virConnectPtr and virUnrefConnect()'ed it afterwards. After this
commit the driver-closing is done in virUnrefConnect() if and only if
the ref-count of the virConnectPtr dropped to zero.
This change in execution order leads to a virConnectPtr leak, at least
for connections to Xen.
The relevant call sequences:
virConnectOpen() -> xenUnifiedOpen() ...
... xenInotifyOpen() -> virConnectRef(conn)
... xenStoreOpen() -> xenStoreAddWatch() -> conn->refs++
virConnectClose() -> xenUnifiedClose() ...
... xenInotifyClose() -> virUnrefConnect(conn)
... xenStoreClose() -> xenStoreRemoveWatch() -> virUnrefConnect(conn)
Before the commit this additional virConnectRef/virUnrefConnect calls
where no problem, because virConnectClose() closed the drivers
explicitly and the additional refs added by the Xen subdrivers were
removed properly. After the commit this additional refs result in a
virConnectPtr leak (including a leak of the hypercall file handle;
that's how I noticed this problem), because now the drivers are only
close if and only if the ref-count drops to zero, but this cannot
happen anymore, because the additional refs from the Xen subdrivers
would only be removed if the drivers get closed, but that doesn't
happen because the ref-count cannot drop to zero.
The fix for this problem is simple: remove the
virConnectRef/virUnrefConnect calls from the Xen subdrivers (see
attached patch). Maybe someone could explain why the Xen Inotify and
Xen Store driver do this extra ref-counting, but none of the other Xen
subdrivers. It seems unnecessary to me and can be removed without
problems.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/conf/domain_conf.c: Don't assume all virDomainObjPtr have
a non-NULL monitor_chr field in virDomainObjFormat.
* src/lxc/lxc_driver.c: Implement suspend/resume driver APis
* src/util/cgroup.c, src/util/cgroup.h: Support the 'freezer'
cgroup controller
* src/libvirt_private.syms: Export virCgroupSetFreezerState
and virCgroupGetFreezerState
When making changes to the remote protocol, src/ is always built
first, so rpcgen should live there, to avoid having to run make
in the 'daemon/' directory before building src/
* src/Makefile.am: Add rules for rpcgen, and drop -I../daemon from
remote client build
* daemon/Makefile.am: Add -I../src/remote/ to libvirtd build
and remove rpcgen rules
* daemon/libvirtd.c: Adapt include of remote_driver.h taking
into account new -I flag
* daemon/remote_protocol.c, daemon/remote_protocol.h,
daemon/remote_protocol.x: Move to src/remote/
* daemon/rpcgen_fix.pl: Move to src/remote/rpcgen_fix.pl
* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
src/domain_conf.h, src/domain_event.c, src/domain_event.h,
src/interface_conf.c, src/interface_conf.h,
src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
and SELINUX_CFLAGS from global INCLUDES and only have them in build
targets which actually need them. Create a libvirt_conf.la
convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h
* daemon/default-network.xml: Move to src/network/default.xml
* daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move
to src/qemu/
* src/qemu.conf: Move to src/qemu/qemu.conf
* daemon/Makefile.am: Remove rules for default-nmetwork.xml and
libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in
uninstall-local that would install polkit again.
* src/Makefile.am: Add rules for installing network/default.xml
and the qemu/*.aug files. Add test case for QEMU augeas files.
Add uninstall-local rule for files/directories created during
install. Rename install-exec-local to install-data-local.
Only install qemu.conf if WITH_QEMU is set.
* tests/networkschematest: Update for XML location move
Move the virsh tool and its man page into the tools directory
* Makefile.am: Remove rules for virsh.1 man page
* virsh.1: Remove auto-generated file
* docs/Makefile.am: Remove rules for virsh.pod man page
* docs/virsh.pod: Move to tools/ directory
* src/Makefile.am, src/.gitignore: Remove rules for virsh
* src/console.c, src/console.h, src/*.ico, src/virsh_win_icon.rc,
src/virsh.c: Move into tools/ directory
* tools/Makefile.am: Add rules for building virsh
* tools/.gitignore: Ignore virsh built files
* tests/virshtest.c, tests/int-overflow: Update for new
virsh location
When we hot-unplug the last device, we're currently double-freeing
the device definition.
Reported by Martin Banas here:
https://bugzilla.redhat.com/523953
* src/qemu_driver.c: fix double free
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in: Add
virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage
* python/generator.py: Mark virSecretGetUsageType, virSecretGetUsageID
as not throwing exceptions
* qemud/remote.c: Implement dispatch for virLookupSecretByUsage
* qemud/remote_protocol.x: Add usage type & ID as attributes of
remote_nonnull_secret. Add RPC calls for new public APIs
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.c, src/datatypes.h: Add usageType and usageID as
properties of virSecretPtr
* src/driver.h: Add virLookupSecretByUsage driver entry point
* src/libvirt.c: Implement virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/libvirt_public.syms: Export virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/remote_internal.c: Implement virLookupSecretByUsage entry
* src/secret_conf.c, src/secret_conf.h: Remove the
virSecretUsageType enum, now in public API. Make volume
path mandatory when parsing XML
* src/secret_driver.c: Enforce usage uniqueness when defining secrets.
Implement virSecretLookupByUsage api method
* src/virsh.c: Include usage for secret-list command
Convert all the secret/storage encryption APIs / wire format to
handle UUIDs in raw format instead of non-canonical printable
format. Guarentees data format correctness.
* docs/schemas/storageencryption.rng: Make UUID mandatory for a secret
and validate fully
* docs/schemas/secret.rng: Fully validate UUID
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in, Add
virSecretLookupByUUID and virSecretGetUUID. Make
virSecretGetUUIDString follow normal API design pattern
* python/generator.py: Skip generation of virSecretGetUUID,
virSecretGetUUIDString and virSecretLookupByUUID
* python/libvir.c, python/libvirt-python-api.xml: Manual impl
of virSecretGetUUID,virSecretGetUUIDString and virSecretLookupByUUID
* qemud/remote.c: s/virSecretLookupByUUIDString/virSecretLookupByUUID/
Fix get_nonnull_secret/make_nonnull_secret to use unsigned char
* qemud/remote_protocol.x: Fix remote_nonnull_secret to use a
remote_uuid instead of remote_nonnull_string for UUID field.
Rename REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING to
REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING and make it take an
remote_uuid value
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.h, src/datatypes.c: Store UUID in raw format instead
of printable. Change virGetSecret to use raw format UUID
* src/driver.h: Rename virDrvSecretLookupByUUIDString to
virDrvSecretLookupByUUID and use raw format UUID
* src/libvirt.c: Add virSecretLookupByUUID and virSecretGetUUID
and re-implement virSecretLookupByUUIDString and
virSecretGetUUIDString in terms of those
* src/libvirt_public.syms: Add virSecretLookupByUUID and
virSecretGetUUID
* src/remote_internal.c: Rename remoteSecretLookupByUUIDString
to remoteSecretLookupByUUID. Fix typo in args for
remoteSecretDefineXML impl. Use raw UUID format for
get_nonnull_secret and make_nonnull_secret
* src/storage_encryption_conf.c, src/storage_encryption_conf.h:
Storage UUID in raw format, and require it to be present in
XML. Use UUID parser to validate.
* secret_conf.h, secret_conf.c: Generate a UUID if none is provided.
Storage UUID in raw format.
* src/secret_driver.c: Adjust to deal with raw UUIDs. Save secrets
in a filed with printable UUID, instead of base64 UUID.
* src/virsh.c: Adjust for changed public API contract of
virSecretGetUUIDString.
* src/storage_Backend.c: DOn't undefine secret we just generated
upon successful volume creation. Fix to handle raw UUIDs. Generate
a non-clashing UUID
* src/qemu_driver.c: Change to use lookupByUUID instead of
lookupByUUIDString
* configure.in: Only define WITH_SECRETS if libvirtd is present
* src/Makefile.am: Only build secrets driver if WITH_SECRETS is
defined. Always add SECRET_DRIVER_SOURCES to EXTRA_DIST
Integrate with QEMU monitor to provide encryption passphrase when
starting a guest using encrypted qcow volumes
* src/qemu_driver.c (findDomainDiskEncryption,
findVolumeQcowPassphrase,
qemudMonitorSendVolumePassphrase, qemudMonitorSendCont): Send a volume
passphrase if qemu asks for it.
If the <encryption format='qcow'> element does not specify a secret
during volume creation, generate a suitable secret and add it to the
<encryption> tag. The caller can view the updated <encryption> tag
using virStorageVolGetXMLDesc().
Similarly, when <encryption format='default'/> is specified while
creating a qcow or qcow2-formatted volume, change the format to "qcow"
and generate a secret as described above.
* src/storage_encryption_conf.h (VIR_STORAGE_QCOW_PASSPHRASE_SIZE,
virStorageGenerateQcowPasphrase),
src/storage_encryption_conf.c (virStorageGenerateQcowPasphrase),
src/libvirt_private.syms: Add virStorageGenerateQcowPasphrase().
* src/storage_backend.c (virStoragegenerateQcowEncryption,
virStorageBackendCreateQemuImg): Generate a passphrase and
<encryption> when creating a qcow-formatted encrypted volume and the
user did not supply the information.
This implementation stores the secrets in an unencrypted text file,
for simplicity in implementation and debugging.
(Symmetric encryption, e.g. using gpgme, will not be difficult to add.
Because the TLS private key used by libvirtd is stored unencrypted,
encrypting the secrets file does not currently provide much additional
security.)
* include/libvirt/virterror.h, src/virterror.c (VIR_ERR_NO_SECRET): New
error number.
* po/POTFILES.in, src/Makefile.am: Add secret_driver.
* bootstrap: Use gnulib's base64 module.
* src/secret_driver.c, src.secret_driver.h, src/libvirt_private.syms:
Add local secret driver.
* qemud/qemud.c (qemudInitialize): Use the local secret driver.
Add a <secret> XML handling API, separate from the local driver, to
avoid manually generating XML in other parts of libvirt.
* src/secret_conf.c, src/secret_conf.h: New files.
* po/POTFILES.in, src/Makefile.am: Add secret_conf.
Add a VIR_SECRET_GET_VALUE_INTERNAL_CALL flag value, replacing the
originally separate libvirt_internal_call parameter. The flag is used
to differentiate external virSecretGetValue() calls from internal calls
by libvirt drivers that need to use the secret even if it is private.
* src/libvirt_internal.h Remove VIR_DOMAIN_XML_FLAGS_MASK
* src/driver.h Add VIR_SECRET_GET_VALUE_FLAGS_MASK constant and
VIR_SECRET_GET_VALUE_INTERNAL_CALL. Re-add the
VIR_DOMAIN_XML_FLAGS_MASK constant
* src/libvirt.c (virSecretGetValue): Don't allow the user to specify
internal flags.
Remove the bogus dependancy between node_device.c & storage_backend.c
by moving the virWaitForDevices into util.h where it can be shared
safely
* src/storage_backend_disk.c, src/storage_backend_logical.c,
src/storage_backend_mpath.c, src/storage_backend_scsi.c: Replace
virStorageBackendWaitForDevices with virFileWaitForDevices
* src/storage_backend.c, src/storage_backend.h: Remove
virStorageBackendWaitForDevices, virWaitForDevices
* src/util.h, src/util.c: Add virFileWaitForDevices
* configure.in: Move xmlrpc check further down after pkgconfig
is detected
* src/Makefile.am: Add missing XMLRPC_CFLAGS/LIBS to opennebula
* src/libvirt_private.syms: Add many missing exports
The interface allows qemudMonitorSendCont() to report errors that are
not overridden by its callers.
Also fix a potential infinite loop in qemuDomainCoreDump() if sending
cont repeatedly fails.
* src/qemu_driver.c (qemudMonitorSendCont): New function.
(qemudAutostartConfigs): Reset error before each call to
qemudStartVMDaemon().
(qemudInitCpus, qemudDomainResume, qemudDomainCoreDump,
qemudDomainRestore, qemudDomainMigratePerform,
qemudDomainMigrateFinish2): Use qemudMonitorSendCont().
* src/security_selinux.c: Use virReportSystemError whereever an
errno is involved
* src/qemu_driver.c: Don't overwrite error message from the
security driver
* src/security.h: Driver API for relabelling host devices
* src/security_selinux.c: Implement relabelling of PCI and USB
devices
* src/qemu_driver.c: Relabel USB/PCI devices before hotplug
Fix all thread locking bugs reported by object-locking test
case.
NB, some of the driver locking is getting too coarse. Driver
mutexes really need to be turned into RW locks instead to
significantly increase concurrency.
* src/lxc_driver.c: Fix useof driver when unlocked in the methods
lxcDomainGetInfo, lxcSetSchedulerParameters, and
lxcGetSchedulerParameters
* src/opennebula/one_driver.c: Fix missing unlock in oneDomainUndefine.
Fix use of driver when unlocked in oneDomainGetInfo,
oneGetOSType, oneDomainShutdown
* src/qemu_driver.c: Fix use of driver when unlocked in
qemudDomainSavem, qemuGetSchedulerType, qemuSetSchedulerParameters
and qemuGetSchedulerParameters
* src/storage_driver.c: Re-work storagePoolCreate to avoid bogus
lock checking warning. Re-work storageVolumeCreateXMLFrom to
remove a potential NULL de-reference & avoid bogus lock check
warnings
* src/test.c: Remove testDomainAssignDef since it break lock chekc
warnings.
* tests/object-locking.ml: Add oneDriverLock, oneDriverUnlock
and one_driver_t methods/types to allow lock checking on the
OpenNebula drivers
The algorithm is quite simple:
If the emulator matches a guest's domain:
if domain has machine type info:
check the domain's machine type info
else
check the guest's default machine type info
else if the emulator matches the guest's default emulator:
check the guest's default machine type info
The previous implementation was incorrectly falling back to the default
machine type info if the domain's machine type info didn't have an
alias.
* src/qemu_driver.c: simplify and fix qemudCanonicalizeMachine()
Currently we only probe the main qemu binary for machine types, but we
should also probe the kvm binary.
* src/qemu_conf.c: probe kvm binary machines in qemudCapsInitGuest()
We need to look at all the domain infos in guest capabilities, not
just the defaults.
In order to allow that, split out a qemudGetOldMachinesFromInfo()
from qemudGetOldMachines(). We'll make more use of it in the next
patch.
* src/qemu_conf.c: split out qemudGetOldMachinesFromInfo() from
qemudGetOldMachines()
This doesn't have any affect on the current tests because we don't have
any machine aliases in the current test data.
* src/qemu_conf.h, src/qemu_driver.c: expose qemudCanonicalizeMachine()
for the tests
* tests/qemuxml2argvtest.c: canonicalize the machine type
After the mentioned patch was applied, I noticed that
shutting down a kvm guest from inside (i.e. poweroff) caused
the guest to shutdown, but not removed from the list of
active guests. DanB pointed out that the problem is that
the virEventAddHandle() call in the qemu driver was asking
to watch for 0 events, not HANGUP | ERROR as it should. Add
these events so that shutdown works again.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
lzop was removed due to some confusion over whether it provided functional
advantages distinct from xz. This has been addressed in the mailing list post
archived at http://permalink.gmane.org/gmane.comp.emulators.libvirt/16487, and
support for lzop is re-added here.
* libvirt.spec.in: add dependancy on lzop
* src/qemu.conf: update documentation of save_image_format
* src/qemu_driver.c: re-add lzop compression option
* src/qemu_driver.c: drop lzma and lzop images compression options
as they are deprecated by xz
* libvirt.spec.in: add requires for xz/bzip2/gzip as they are needed
to implement the compression options
* src/qemu_driver.c (QEMUD_SAVE_FORMAT_LAST): Define.
(qemudSaveCompressionTypeFromString): Declare.
(qemudSaveCompressionTypeToString): Declare.
(qemudDomainSave): Use those functions rather than open-coding them.
Use "cat >> '%s' ..." in place of equivalent
"dd of='%s' oflag=append conv=notrunc ...".
* src/qemu_driver.c (enum qemud_save_formats) [QEMUD_SAVE_FORMAT_XZ]:
New member.
[QEMUD_SAVE_FORMAT_LZMA]: Mark as deprecated.
Use an explicit value for each member.
(qemudDomainSave, qemudDomainRestore): Handle the new member.
* src/qemu.conf: Mention xz, too.
* configure.in src/Makefile.am src/storage_backend.[ch]
src/storage_conf.[ch] src/storage_backend_mpath.[ch] po/POTFILES.in:
add a new module for storage multipath, it requires device-mapper
* src/xm_internal.c (xenXMDomainConfigParse): After t=strchr...
don't test *t; it's known. This was *not* detected by clang,
but I spotted it since once instance was in the vicinity of the
dead increment of "data".
* src/vbox/vbox_tmpl.c: minor bug in selecting the graphics type. if the
graphics type was desktop it was assumed that display is set for it,
and thus crashed on strdup. Also adds a number of missing OOM checks.
* src/lxc_container.c (lxcContainerMountBasicFS): Don't leak upon failure.
Add "cleanup:" label and change each post-allocation failure to
use "goto cleanup" rather than returning immediately.
* src/qemu_conf.c (qemuBuildHostNetStr): Do not remove the type_sep=','
dead store, since not having it would be a problem if we ever add a
new attribute=VAL option.
* src/esx/esx_vi.[ch]: convert esxVI_RemoteRequest_Execute() to a
simpler esxVI_Context_Execute() version, remove esxVI_RemoteRequest
and convert esxVI_RemoteResponse to esxVI_Response
* src/esx/esx_vi_methods.c: update and simplify callers to use
esxVI_Context_Execute() instead of esxVI_RemoteRequest_Execute()
* src/esx/esx_vi.[ch]: use virXPathNode*() in
esxVI_RemoteRequest_Execute() and remove
esxVI_RemoteResponse_DeserializeXPathObject*()
* src/esx/esx_vi_methods.c: update callers to use the new syntax of
esxVI_RemoteRequest_Execute()
* src/esx/esx_driver.c: add configStatus to the requested properties
to check it in esxVI_GetVirtualMachineIdentity()
* src/esx/esx_vi.[ch]: add esxVI_GetManagedEntityStatus()
and use it in esxVI_GetVirtualMachineIdentity()
* src/esx/esx_vi_types.[ch]: add VI type esxVI_ManagedEntityStatus
* src/esx/esx_driver.c: handle spaces in VMX file path and use a
virBuffer to encode spaces correctly in the resulting URL
* src/esx/esx_vi.c: include the URL in the error message in case
of a download error
* configure.in src/Makefile.am: change detection and flags
* src/phyp/phyp_driver.c src/phyp/phyp_driver.h: connection now
need to be done as part of the driver code, cleaned up by DV
* src/qemu_driver.c: Free the vm->monitor_chr field at VM shutdown.
Unlink the UNIX domain socket at VM shutdown to avoid littering
FS with old sockets
Separate the guest created QEMU monitor socket location
from the libvirtd create XML / PID data files, to improve
security separation when running QEMU non-root
* libvirt.spec.in: Leave /var/run/libvirt/qemu as root:root
* src/qemu_conf.h: Add libDir and cacheDir directory paths
* src/qemu_driver.c: Move QEMU monitor socket from
stateDir to libDir to avoid making security critical directory
accessible to QEMU guests.
* src/util.c: Delay running hook till after damonizing to
ensure pidfile is still written before changing UID/GID
* src/openvz_conf.c (openvzReadNetworkConf): Initialize "net".
Otherwise, upon openvzRead... failure, we would "goto error;"
where an uninitialized "net" could be dereferenced.
* src/test.c (testOpenVolumesForPool): Upon early virAsprintf or
virXPathNodeSet failure, "goto error" would take us to
virStorageVolDefFree(def), but with "def" not defined.
Initialize it to NULL.
* src/storage_backend.c: Include "internal.h".
(virStorageBackendCopyToFD): Mark inputvol parameter as "nonnull".
Remove test for non-NULL inputvol. Both callers ensure it's non-NULL.
* src/libvirt.c (virStoragePoolSetAutostart): Return -1 if the pool
argument is invalid, rather than "goto error" where we could dereference
that possibly-NULL "pool".
(virConnectFindStoragePoolSources): Likewise.
(virConnectNumOfDomains): Likewise.
Daniel P. Berrange spotted that the two latter functions
needed the same treatment.
* docs/schemas/domain.rng: Add <serial> element to disks
* src/domain_conf.h, src/domain_conf.c: XML parsing and
formatting for disk serial numbers
* src/qemu_conf.c: Set serial number when launching guests
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.xml: Add
serial number to XML test
Add option to domain XML for
<memoryBacking>
<hugepages/>
</memoryBacking>
* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
and pass it when hugepages are requested.
Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
hugepage tests
* tests/testutils.c: Run test function twice, once to prime it for
static allocations, once to count the non-static allocations.
* tests/testutilsqemu.c: Initialize variable correctl
* src/capabilities.c: Don't free machines variable upon failure
since caller must do that
* src/xm_internal.c: Add missing check for OOM in building VIF
config param
* docs/schemas/domain.rng: augment the video model with an optional
acceleration element with optional accel2d and accel3d flags
* src/domain_conf.c src/domain_conf.h: exten the virDomainVideoDef
structure with an optional accel field, virDomainVideoAccelDefParseXML
and virDomainVideoAccelDefFormat functions to parse and serialize
the structure.
Paolo Bonzini points out that in my refactoring of the code for
virDomainMigrate(), I added a check for the return value from
virDomainMigratePerform(). The problem is that we don't want to
exit if we fail, we actually want to go on and do
virDomainMigrateFinish2() with a non-0 return code to clean things
up. Remove the check.
While reproducing this issue, I also noticed that we wouldn't
always properly propagate an error message. In particular, I
found that if you blocked off the migration ports (with iptables)
and then tried the migration, it would actually fail but we would
get no failure output from Qemu. Therefore, we would think we
succeeded, and leave a huge mess behind us. Execute the monitor
command "info migrate", and look for a failure string in there
as well.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/esx/esx_util.c: esxUtil_ParseQuery() warns if a known query
parameter should be ignored due to the corresponding char/int pointer
being NULL, instead of silently ignoring it. Fix the control flow.
* src/esx/esx_vmx.c: add an extra type of addressType beside 'static'
and 'generated', 'vpx' indicates that the MAC address was generated
by a vCenter.
Calling qsort() on the disks array causes disk to be
unneccessarily re-ordered, potentially breaking the
ability to boot if the boot disk gets moved later in
the list. The new algorithm will insert a new disk as
far to the end of the list as possible, while being
ordered correctly wrt other disks on the same bus.
* src/domain_conf.c, src/domain_conf.h: Remove disk sorting
routines. Add API to insert a disk into existing list at
the optimal position, without resorting disks
* src/libvirt_private.syms: Export virDomainDiskInsert
* src/xend_internal.c, src/xm_internal.c: Remove calls to
qsort, use virDomainDiskInsert instead.
* src/qemu_driver.c: Remove calls to qsort, use virDoaminDiskInsert
instead. Fix reordering bugs when hotunplugging disks and
networks. Fix memory leak in disk/net unplug
* proxy/Makefile.am: Build storage_encryption_conf.c since its a
dependancy of domain_conf.c
* src/storage_encryption_conf.c: Disable XML parsing APis when
build under proxy
* src/test.c: Add a dummy no-op secrets driver for test suite
The if ((nlptr...)) implicitly assumes commptr != NULL (and that "buf"
starts with "cmd"). Make the assumption explicit, it will be broken in
a future patch.
* src/qemu_driver.c: Don't assume buffered monitor output echoes the
command.
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "disk->encryption" is
non-NULL iff encryption information is available.
A domain with partial encryption information can be defined,
completeness of the information is not verified. The domain won't
start until the remaining information is added, of course.
* docs/formatdomain.html, docs/formatdomain.html.in: Document
new encryption options for disks
* docs/schemas/domain.rng: Pull in storage encryption schema
rules
* src/domain_conf.h, src/domain_conf.c: Wire up storage encryption
XML parsing/formatting APIs
Supports only virStorageVolCreateXML, not virStorageVolCreateXMLFrom.
Curiously, qemu-img does not need the passphrase for anything to create
an encrypted volume. This implementation thus does not need to touch
any secrets to work with cooperating clients. More generic passphrase
handling is added in the next patch.
* src/storage_backend.c: Request encryption when creating qcow/qcow2
files
* src/storage_backend_disk.c, src/storage_backend_fs.c,
src/storage_backend_logical.c: Refuse to create volumes with
encryption params set.
(The implementation is not very generic, but that can be very
easily rectified if/when new encryption formats appear.)
* src/storage_backend_fs.c: Probe for qcow/qcow2 encryption
algorithm field
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "vol->encryption" is
non-NULL iff the volume is encrypted.
Note that partial encryption information (e.g. specifying an encryption
format, but not the key/passphrase) is valid, libvirt will automatically
choose value for the missing information during volume creation. The
user can read the volume XML, and use the unmodified <encryption> tag in
future operations (without having to be able to understand) its contents.
* docs/formatstorage.html, docs/formatstorage.html.in: Document
storage volume encryption options
* src/storage_conf.c, src/storage_conf.h: Hook up storage
encryption XML handling
* tests/storagevolschemadata/vol-qcow2.xml: Test case for encryption
schema changes
Define an <encryption> tag specifying volume encryption format and
format-depenedent parameters (e.g. passphrase, cipher name, key
length, key).
Currently the only defined parameter is a reference to a "secret"
(passphrase/key) managed using the virSecret* API.
Only the qcow/qcow2 encryption format, and a "default" format used to
let libvirt choose the format during volume creation, is currently
supported.
This patch does not add any users; the <encryption> tag is added in
the following patches to both volumes (to support encrypted volume
creation) and domains.
* docs/*.html: Re-generate
* docs/formatstorageencryption.html.in, docs/sitemap.html.in:
Add page describing storage encryption data format
* docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
Add RNG schema for storage encryption format
* po/POTFILES.in: Add src/storage_encryption_conf.c
* src/libvirt_private.syms: Export virStorageEncryption* functions
* src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
helper APIs for dealing with storage encryption format
* libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
RNG schema
* include/libvirt/virterror.h, src/virterror.c: Add VIR_WAR_NO_SECRET
* src/libvirt_private.syms, src/datatypes.h, src/datatypes.c: Type
virSecret struct definition and helper APIs
* src/driver.h: Sub-driver API definitions for secrets
* src/libvirt.c: Define new sub-driver for secrets
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.
* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
files list
