* src/logging.c src/logging.h src/libvirt_private.syms:
define new functions virLogSetFromEnv and virLogParseDefaultPriority
* qemud/qemud.c src/libvirt.c tests/eventtest.c: cleanup to use the
unified functions
* qemud/qemud.c src/logging.[ch]: Similar as for general libvirt, don't
convert high priority levels to debug level. Ignore LIBVIRT_LOG_FILTERS
and LIBVIRT_LOG_OUTPUTS when they're set to the empty string, otherwise
they can override a valid setting from the config file. Send all
settings through the parser functions for validation, so that the
existence of a bad setting doesn't nullify a good setting that should
have applied -- particularly the default output. Keep the order of
precedence consistent for all variables between the environment and
the config file. Warn when an invalid log level, filter, or output
is ignored.
* src/libvirt_private.syms: export internally a few convenience functions
* src/libvirt.c src/logging.c: Don't convert high priority levels to the
debug level. Don't parse LIBVIRT_LOG_FILTERS and LIBVIRT_LOG_OUTPUTS
when they're set to the empty string. Warn when the user specifies an
invalid value (empty string remains a noop).
* po/POTFILES.in: src/logging.c now include translatable strings
* src/xm_internal.c: in case of multiple connections to the xen driver
and some clients were not using domain events, the whole /etc/xen
monitoring would break leading to disapearing domains.
* src/esx/esx_driver.c src/esx/esx_vi.[ch] src/esx/esx_vmx.[ch]:
adds version checking for GSX 2.0, allows to pass a specific port
for the connection and also add a new specific gsx scheme for
easier connections to GSX hosts
Fix up qemudDomainMigratePrepare2 to use virGetHostname instead of
gethostname. Besides the fact that virGetHostname is far more clever,
there was a latent bug in the handling that could cause a buffer overflow
on a very long hostname.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* autobuild.sh, mingw32-libvirt.spec.in: Enable esx on mingw32
* src/esx/esx_driver.c: Define AI_ADDRCONFIG if not set
* src/esx/esx_util.c, src/esx/esx_vi_types.c: Always use
%lld & friends, since gnulib guarentees we have these
and not the target's own variants
If the bridge device is configured to have IPv6 address and
accept router advertisments, then a malicious guest can send
out bogus advertisments and hijack/DOS host IPv6 connectivity
* src/network_driver.c: Set accept_ra=0, disable_ipv6=1, autoconf=0
for IPv6 sysctl on virual network bridge devices
PCIe DevCap register is actually 32 bits, not 16 bits. Since FLR is
bit 28, we clearly are failing to detect FLR support.
Known to fix device reset with some SR-IOV devices.
* src/pci.c: fix pciDetectFunctionLevelReset()
* src/util.c: Don't drop capabilities until after the PID file has
been written. Kill off child if writing the PID file fails
* src/qemu_driver.c: Remove bogus trailing '/' in state dir
* esx/esx_driver.c: add some documentation about the CPU scheduler
parameters and remove some old, unnecessary compensation code, since
virsh uses the proposed parameter types now.
* src/qemu_driver.c: fix qemudOpenMonitorUnix() to retry on ENOENT
instead of EACCES which is the error one receive when the socket
error hasn't shown up yet
In order to hotplug a network/bridge backed NIC, we need to first create
the tap file descriptor, add the tap interface to the bridge and then
pass the file descriptor to the qemu process using the 'getfd' monitor
command.
Once the tapfd has been accepted, we create the network backend using
host_net_add, supplying the name assigned to the tapfd. If this fails,
we need to close the tapfd in qemu using the 'closefd' monitor command.
If the version of qemu does not support the getfd/closefd monitor
commands we detect "unknown command" in the getfd reply and fail the
attach operation.
* src/qemu_driver.c: add support for tapfd based hotplug in
qemudDomainAttachNetDevice()
Add qemudMonitorCommandWithFd() which allows a file descriptor to be
sent to qemu over a unix monitor socket using SCM_RIGHTS. See the
unix(7) and cmsg(3) man pages.
* src/qemu_conf.c: add a scm_fd param to qemudMonitorCommandExtra(),
add qemudMonitorCommandWithFd(), implement SCM_RIGHTS support in
qemudMonitorSendUnix()
Switch from using write() to using sendmsg() on QEMU's monitor socket
so that we can add support for SCM_RIGHTS.
* src/qemu_driver.c: add sendmsg() based qemudMonitorSendUnix() and use
it when the monitor fd is a unix socket
Add a little helper function to write the monitor command followed by
carriage return in a single write.
This doesn't make any real difference, but allows us to more easily
switch to using sendmsg() when using the monitor over a unix socket.
* src/qemu_conf.c: split qemudMonitorSend() out
In subsequent patches we're going to have a file descriptor to close
too, so centralize the error handling cleanups to make things easier.
* src/qemu_conf.c: in qemudDomainAttachNetDevice() consolidate the
error handling cleanups together
With hotplug, we're going to want to pass a tapfd name rather than an
actual file descriptor, so prepare the way by passing a string tapfd to
qemuBuildHostNetStr().
* src/qemu_conf.h: qemuBuildHostNetStr() takes a string tapfd now
* src/qemu_conf.c: pass qemuBuildHostNetStr() a string rather than an
actual file descriptor
* src/qemu_driver.c: update qemudDomainAttachNetDevice() for change
* src/qemu_conf.h: export qemudNetworkIfaceConnect()
* src/qemu_conf.c: move vnet_hdr logic into qemudNetworkIfaceConnect()
since we need it for hotplug too
By probing for qemu machine types, we increased the time of a
GetCapabilities call from 100us to a whopping 60ms.
This patch takes the approach of only probing for machine types
when the mtime of the emulator binary changed since the last time
the capabilities were generated.
* src/capabilities.h: cache the emulator binary mtime
* src/qemu_conf.c: add qemudGetOldMachines() to copy the machine
types from the old caps struct if the mtime for the binary hasn't
changed
* src/qemu_conf.h, src/qemu_driver.c: pass the old caps pointer to
qemudCapsInit()
e.g. <machine canonical='pc'>pc-0.11</machine>
* src/capabilities.c: output the canonical machine names in the
capabilities output, if available
* docs/schemas/capabilities.rng: add the new attribute
Not all possible emulators are actually in the capabilities, so if we
don't find the supplied emulator we should probe it directly for machine
types.
* src/qemu_driver.c: add qemudCanonicalizeMachineDirect() to directly
probe an emulator for the canonical machine type
In qemu-0.11 there is a 'pc-0.10' machine type which allows you to run
guests with a machine which is compatible with the pc machine in
qemu-0.10 - e.g. using the original PCI class for virtio-blk and
virtio-console and disabling MSI support in virtio-net. The idea here
is that we don't want to suprise guests by changing the hardware when
qemu is updated.
I've just posted some patches for qemu-0.11 which allows libvirt to
canonicalize the 'pc' machine alias to the latest machine version.
This patches makes us use that so that when a guest is configured to
use the 'pc' machine type, we resolve that to 'pc-0.11' machine and
save that in the guest XML.
See also:
https://fedoraproject.org/wiki/Features/KVM_Stable_Guest_ABI
* src/qemu_conf.c: add qemudCanonicalizeMachine() to canonicalize
the machine type according to the machine aliases in capabilities
* src/qemu_driver.c: parse aliases in qemudParseMachineTypesStr()
A subsequent commit will add a "canonical" field to this structure,
this patch basically just prepares the way for that.
The new type is added, along with virCapabilitiesAlloc/FreeMachines()
helpers and a whole bunch of code to make the transition.
One quirk is that virCapabilitiesAddGuestDomain() and
virCapabilitiesAddGuest() take ownership of the machine list rather
than duping it. This makes sense to avoid needless copying.
* src/capabilities.h: add the virCapsGuestMachine struct and use it
in virCapsGuestDomainInfo, add prototypes for new functions and
update the AddGuest() prototypes
* src/capabilities.c: add code for allocating and freeing the new
type, change the machines parameter to AddGuest() etc.
* src/libvirt_private.syms: export the new helpers
* src/qemu_conf.c: update all the machine type code to use the new
struct
* src/xen_internal.c: ditto
* tests/testutilsqemu.c: ditto
Currently we hardcode the QEMU machine types. We should really just
parse the output of 'qemu -M ?' so the lists don't get out of sync.
xenner doesn't support '-M ?', so we still need to hardcode that.
The horrible (const char *const *) is removed in a subsequent patch.
* src/qemu_conf.c: kill the arch_info*machines tables, retain the
hardcoded xenner machine type, add qemudProbeMachineTypes() to
run and parse 'qemu -M ?' and use it in qemudCapsInitGuest()
There's no need for the hasbase/hasaltbase confusion, just store the
first binary path found in a variable.
* src/qemu_conf.c: kill hasbase/hasaltbase logic in qemudCapsInitGuest()
* src/esx/esx_driver.c src/esx/esx_vi.c src/esx/esx_vi.h
src/esx/esx_vmx.c src/esx/esx_vmx.h: extend the VI API version checks
to accept version 4.0 and takes care of the virtualHW.version change
from 4 to 7.
* src/esx/esx_driver.c src/esx/esx_util.c src/esx/esx_util.h
src/esx/esx_vi.c src/esx/esx_vi.h: adds a no_verify query parameter to
stop libcurl from verifying theserver certificate for the https
transport.
Do the check in libvirt.c, to save drivers from the burden. This changes
behavior slightly in the qemu driver: we no longer explictly error if
passed an empty string. An error will still be thrown when the device
lookup fails.
* src/vbox/vbox_driver.c: remove some old 2.5 switches and plug the
3.0 driver
* src/vbox/vbox_V3_0.c src/vbox/vbox_CAPI_v3_0.h: the driver for
VirtualBox 3.0
* src/vbox/vbox_tmpl.c: handle the new driver and add event support
* src/Makefile.am: plug in the new module
Features supported:
- Connects to HMC/VIOS or IVM systems.
- Life cycle commands (resume and shutdown).
- dumpxml
- 'list' and 'list --all'
What is being implemented:
- better and centralized control for UUID
- definexml
- CPU management commands
* src/domain_conf.c src/domain_conf.h: first version of the driver
* configure.in src/Makefile.am include/libvirt/virterror.h
src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
in the general framework
* src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client
to talk to the VI services on ESX nodes.
* configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h
src/libvirt.c src/virterror.c: glue in the new driver
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug,
src/qemu.conf: Add 'cgroups_controllers' and 'cgroups_device_acl'
parameters
* src/qemu_conf.h, src/qemu_conf.c: Load & parse configuration params
for cgroups
* src/qemu_driver.c: Only use cgroups controllers that are activated,
and use configured device whitelist instead of default, if set.
* src/qemu_driver.c: Set a restrictive block device whitelist for
all QEMU guests. Update whitelist when hotplugging disks.
* src/cgroup.h, src/cgroup.c: Add some more convenience methods
for dealing with block device whitelists.
* src/qemu_driver.c: Add driver methods qemuGetSchedulerType,
qemuGetSchedulerParameters, qemuSetSchedulerParameters
* src/lxc_driver.c: Fix to use unsigned long long consistently
for schedular parameters
* src/cgroup.h, src/cgroup.c: Fix cpu_shares to take unsigned
long long
* src/util.c, src/util.h, src/libvirt_private.syms: Add a
virStrToDouble helper
* src/virsh.c: Fix handling of --set arg to schedinfo command
to honour the designated data type of each schedular tunable
as declared by the driver
Allow the driver level cgroup to be managed explicitly by the
hypervisor drivers, in order to detect whether to enable or
disable cgroup support for domains. Provides better error
reporting of failures. Also allow for creation of cgroups for
unprivileged drivers if controller is accessible by the user.
* src/cgroup.c, src/cgroup.h: Add an API to obtain a driver cgroup
* src/lxc_conf.h, src/lxc_controller.c, src/lxc_driver.c:
Obtain a driver cgroup at startup and use that instead of
re-creating everytime.
* src/util.c, src/util.h, src/libvirt_private.syms: Add a
virGetUserName() helper
* src/cgroup.c: Detect the mount location of every controller at
time a virCgroupPtr is created. Detect current process' placement
within group to avoid assuming it is in the root. Pass controller
ID into SetValueStr/GetValueStr to enable much duplicated code to
be eliminated
* src/datatypes.c src/domain_conf.c src/interface_conf.c
src/lxc_driver.c src/qemu_driver.c src/storage_backend.c src/virsh.c:
add bare %s format string to printf-derivatives called with no format
string
GCC >= 4.4 assumes the 'printf' attribute refers to the native
runtime libraries format specifiers. Thanks to gnulib, libvirt
has GNU format specifiers everywhere. This means we need to
use 'gnu_printf' with GCC >= 4.4 to get correct compiler
checking of printf format specifiers.
* HACKING: Document new rules for ATTRIBUTE_FMT_PRINTF
* autobuild.sh, mingw32-libvirt.spec.in: Disable OpenNebula
driver on mingw32 builds
* qemud/dispatch.h, qemud/qemu.h, src/buf.h src/internal.h,
src/logging.h, src/security.h, src/sexpr.h, src/util.h,
src/virterror_internal.h, src/xend_internal.c: Change
over to ATTRIBUTE_FMT_PRINTF.
* src/virsh.c: Disable 'cd' and 'pwd' commands on Win32
since they don't compile
* src/threads-win32.c: Add missing return value check
If the qemu binary supports "-no-kvm" and/or "-no-kqemu", they should
always be added for plain "qemu" domains. Previously, we omitted them
whenever the host and guest architectures implied that they would be
disabled automatically, but that logic was flawed in some cases
(such as i686 and x86_64).
* src/qemu_conf.c: fix the conditions for adding "-no-kvm" and/or "-no-kqemu"
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in: adds the new
flag VIR_MEMORY_PHYSICAL for virDomainMemoryPeek
* src/libvirt.c: update the front-end checking
* src/qemu_driver.c: extend the QEmu driver
* src/datatypes.c: fix a lock problem on error handling, as the
error report takes the lock, it must be released before, fixes
the problem but just for Interface objects
qemu network devices are hot-unplugged in two stages - first the PCI NIC
is removed using 'pci_del <pci_addr>' and then the backend is removed
using 'host_net_remove <vlan> <name>'.
In order to perform these operations we need to have retained the
PCI address, backend name and vlan number.
* src/qemu_driver.c: add qemudDomainDetachNetDevice()
When we pci_add a NIC, we need to retain the PCI address assigned by
qemu for using during detach.
* src/qemu_driver.c: use qemudParsePciAddReply() to pull the PCI
address from the pci_add reply
* src/domain_conf.c: handle storing and parsing the PCI address in the
domain state XML file
The current code for parsing pci_add replies ignores the the domain and
bus numbers. Re-write the code to rectify that.
Also, since pci_add is used for NIC hotplug as well ask disk hotplug,
re-factor the code into a separate function.
* src/qemu_driver.c: add qemudParsePciAddReply() function which can
handle parsing domain and bus numbers
If we fail to pci_add a NIC, we should remove the network backend and
leave things the way we found them. To do that, we pre-allocate a
host_net_remove monitor command and issue that if the pci_add fails.
If the remove fails, we just log a warning.
We can only do this if we have a name for the network backend and
we know the vlan number its associated with.
* src/qemu_driver.c: host_net_remove the network backend if the
pci_add fails
Implement basic NIC hotplug support using the 'host_net_add' and
'pci_add' qemu monitor commands.
For now, we don't support 'bridge' or 'network' types.
Also, if pci_add fails, we currently fail to remove the backend
which we added.
Finally, NIC hot-unplug support is missing.
* src/qemu_driver.c: add qemudDomainAttachNetDevice()
* src/qemu_conf.[ch]: export qemuBuildNicStr(), qemuBuildHostNetStr()
and qemuAssignNames()
* src/libvirt_private.syms: export virDomainNetTypeToString()
qemudDomainChangeEjectableMedia() currently extracts the qemu command
line flags, but other device attaching code might need it, so move
the qemudExtractVersionInfo() call up a frame.
* src/qemu_driver.c: move the qemudExtractVersionInfo() call from
qemudDomainChangeEjectableMedia() to qemudDomainAttachDevice()
Currently, an interface's vlan number corresponds to its index in
the table of network interfaces. That is no longer true when we
allow devices to be removed.
To fix this, we store the vlan number in the domain's state XML
so that it survives libvirtd restarts.
* src/domain_conf.h: add vlan number to virDomainNetDef
* src/domain_conf.c: store it in XML as <state vlan='N'/>, defaulting
to -1 if this is state saved by a previous version of libvirt
* src/qemu_conf.c: assign vlan numbers before starting qemu
The qemu driver needs to assign and keep track of identifiers for
network devices so that it can remove them. We need to keep this state
across libvirtd restarts, but it's not configuration that needs to
be kept across guest restarts.
* src/domain_conf.c: parse and format <state nic="foo" hostnet="bar"/>
We need these so that we can remove the devices via the monitor.
* src/domain_conf.h: add nic_name and hostnet_name to virDomainNetDef
* src/domain_conf.c: free nic_name and hostnet_name
* src/qemu_conf.c: add qemuAssignNetNames(), use it if qemu has
support for the param and pass the names on the command line
* tests/qemuxml2argv*: add a test for this
Add QEMUD_CMD_FLAG_NET_NAME to indicate that '-net ...,name=foo' is
supported and QEMUD_CMD_FLAG_HOST_NET_ADD to indicate that the
'host_net_add' monitor command is available.
Set both these flags if the qemu version is greater than 0.10.0.
Checking via the '-help' output would not work for the monitor command
and even for the command line arg, it would be quite fragile.
* src/qemu_conf.h: add new flags as aliases of QEMUD_CMD_FLAG_0_10
* src/qemu_conf.c: set QEMUD_CMD_FLAG_0_10 for versions >= 0.10.0
* tests/qemuhelptest.c: set QEMUD_CMD_FLAG_0_10 for the appropriate
qemu versions
Re-factor this code so that it can be used for NIC hotplug
too. The awkward prefix and type_sep arguments are needed to
allow us to do "host_net_add tap vlan=..."
* src/qemu_conf.c: factor the net backend string formatting
code into its own function
Re-factor this code so that it can be used for NIC hotplug
too. The awkward arguments are needed to allow use to do
"pci_add auto nic macaddr=..."
* src/qemu_conf.c: factor the nic string formatting code into
its own function
When we hot-plug a disk device into a qemu guest, we need to retain its
PCI address so that it can be removed again later. Currently, we do
retain the slot number, but not across libvirtd restarts.
Add <state devaddr="xxxx:xx:xx"/> to the disk device XML config when the
VIR_DOMAIN_XML_INTERNAL_STATUS flag is used. We still don't parse the
domain and bus number, but the format allows us to do that in future.
* src/domain_conf.h: replace slotnum with pci_addr struct, add helper
for testing whether the address is valid
* src/domain_conf.c: handle formatting and parsing the address
* src/qemu_driver.c: store the parsed slot number as a full PCI address,
and use this address with the pci_del monitor command
* src/vbox/vbox_tmpl.c: we're debug printing slotnum here even though
it can never be set, just delete it
We need to store things like device names and PCI slot numbers in the
qemu domain state file so that we don't lose that information on
libvirtd restart. Add a flag to indicate that this information should
be parsed or formatted.
Make bit 16 and above of the flags bitmask for internal use only and
consume the first bit for this new status flag.
* include/libvirt/libvirt.h: add VIR_DOMAIN_XML_FLAGS_MASK
* src/libvirt.c: reject private flags in virDomainGetXMLDesc()
* src/domain_conf.h: add VIR_DOMAIN_XML_INTERNAL_STATUS
* src/domain_conf.c: pass the flag from virDomainObjParseXML() and
virDomainSaveStatus
* src/libvirt.c: activate the interface drivers
* po/POTFILES.in: add the netcf driver as a source of localization strings
* src/interface_driver.c: NETCF_ENOMEM -> VIR_ERR_NO_MEMORY mapping was
breaking syntax checking
* src/interface_driver.c src/interface_driver.h: the new driver
* src/Makefile.am qemud/Makefile.am qemud/qemud.c: hook the new driver
in the build system and get ti activated by the daemon
* src/libvirt_private.syms: export needed symbols internally
MAC address of a particular interface may change over time, and the
reduced virInterface object (which contains just name and mac) needs
to reflect these changes. Since we can't modify the mac address of an
existing virInterface (some other thread may currently be using it) we
just create a new virInterface, and let the old one die a dignified
death when its refct goes to 0.
* src/datatypes.c: fix the matching and lifetime of virInterface object
accordingly
* include/libvirt/virterror.h src/virterror.c: if a driver's
virInterfaceLookupByMACString() function finds more than one interface
with the desired MAC Address, this new error is raised.
* src/virsh.c: add a number of interface related commands:
iface-list, iface-name, iface-mac, iface-dumpxml, iface-define,
iface-undefine, iface-edit, iface-start and iface-destroy
Unlike the pty monitor (which we know exists since we scrape its path from
stdout), we have no way of knowing that the unix monitor socket should exist/
be initialized. As a result, some of my KVM guests randomly fail to start on
F10 host.
Try to open the unix socket in a 3 second timeout loop. Ignore EACCES (path
does not exist if a first time run) and ECONNREFUSED (leftover socket from
a previous run hasn't been removed yet). Fixes things for me.
Have storage building functions be definitions of
virStorageBackendBuildVolFrom: we will need to do this in the future anyways
if we ever support the flags attribute.
Break out separate functions for
- Determining the supported '*-img' tool,
- The tool's associated create function,
- Desired function for cloning (CreateXMLFrom).
This will be eventually used to unify cloning across all backends.
Currently, if no format is specified for a new disk volume, we pass the
invalid value "none" as the FS type to 'parted mkpart'.
There doesn't seem to be a way to have parted not format the drive, so
just default to using 'ext2' in this case: this shouldn't cause any harm,
since we are creating a new partition in the first place.
* configure.in: Add --with-qemu-user and --with-qemu-group args
* libvirt.spec.in: use 'qemu' for user/group for Fedora >= 12
* qemud/libvirtd_qemu.arg, qemud/test_libvirtd_qemu.aug,
src/qemu.conf: Add 'user' and 'group' args for configuration
* src/Makefile.am: Create %localstatedir/cache/libvirt/qemu
* src/qemu_conf.c, src/qemu_conf.h: Load user/group from config
* src/qemu_driver.c: Change user ID/group ID when launching QEMU
guests. Change user/group ownership on disks/usb/pci devs.
Put memory dumps in %localstatedir/cache/libvirt/qemu
* src/util.c, src/util.h: Add convenient APIs for converting
username/groupname to user ID / group ID
* src/driver.h: add new driver functions virDrvNumOfDefinedInterfaces
and virDrvListDefinedInterfaces
* src/libvirt.c: implements the entry points, calling new driver
functions
* qemud/remote.c qemud/remote_dispatch_args.h qemud/remote_protocol.[chx]
qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_ret.h
qemud/remote_dispatch_table.h src/remote_internal.c: implement the
client/server side of the RPC
* include/libvirt/libvirt.h[.in]: adds signatures for the new exported
functions virConnectNumOfDefinedInterfaces and
virConnectListDefinedInterfaces
* src/libvirt_public.syms: export the new symbols
Remove redundant error reporting functions which obscured the
filename/line number reporting. Removed code which created a
virDomain/virNetwork object, since those are silently dropped
in error reporting functions now
* src/remote_internal.c: Remove error() and errorf() in favour of
macros, and remove server_error in favour of direct call
Splits up the 'call' method moving generic IO code out into
separate method to allow it to be easily reused for sending
data streams
* src/remote_internal.c: Split 'call' into two methods, the first
with same name serializes a set of method arguments into a
message, the second 'remoteIO' takes a pre-serialized messages,
sends it and awaits a reply
* src/remote_internal.c: Rename processCallRecvMsg to
processCallDispatch, and move code specific to method replies
into processCallDispatchReply, and rename processCallAsyncEvent
to processCallDispatchMessage
The 'remote_message_header' struct has a mis-leadingly named
field 'direction'. It is really a reflection of the type of
message, and some types can be sent in either direction. Thus
the field is more accurately named 'type'. No function change.
* qemud/remote_protocol.x: Rename 'direction' to 'type' in
'remote_message_header. Write better docs describing the
message header field semantics & usage
* qemud/remote_protocol.c, qemud/remote_protocol.h: Regenerate
* qemud/remote.c, qemud/dispatch.c, src/remote_internal.c
Update to reflect rename of 'direction' to 'type'
The naming convention for structs used in the RPC layer is for
incoming requests to be called XXXX_args, and the associated
outgoing reply to be called XXXX_ret. Asynchronously emitted
messages (eg events) are re-using the XXXX_ret naming scheme.
This patch changes that such that async messages are XXXX_msg,
and stops adding entries for them in the dispatch table, avoiding
the need for a dummy no-op implementation.
* qemud/remote.c: Remove dummy remoteDispatchDomainEvent, no
longer required. Update to replace remote_domain_event_ret
with xdr_remote_domain_event_msg
* qemud/remote_protocol.x: Rename remote_domain_event_ret to
remote_domain_event_msg
* qemud/remote_generate_stubs.pl: Adding handling for new
XXX_msg structs.
* src/remote_internal.c: Rename remote_domain_event_ret to
remote_domain_event_msg
* qemud/remote_dispatch_prototypes.h, qemud/remote_dispatch_ret.h,
qemud/remote_dispatch_table.h, qemud/remote_protocol.h,
qemud/remote_protocol.c: auto-regenerate
* src/virsh.c: adds cd and pwd commands to virsh useful for save and
restore commands
* docs/virsh.pod virsh.1: update the documentation
* AUTHORS: add Paolo Bonzini
by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.
* src/remote_internal.c: Disable libvirtd autostart if the
LIBVIRT_AUTOSTART=0 env variable is set
* src/libvirt.c: Document environment variables can impact
the virConnectOpen API
* src/interface_conf.c src/interface_conf.h: the import and export
routines and the internal APIs
* src/Makefile.am: hook the new file in the makefiles
* src/libvirt_private.syms: export a few private symbols internally
* po/POTFILES.in: the new file contains translatable strings
* qemud/remote.c: Send back the actual libvirt connection error
rather than formatting a generic error for security driver
methods
* src/libvirt.c: Fix virDomainGetSecurityLabel, and
virNodeGetSecurityModel to correctly set the error on
the virConnectPtr object, and raise a full error rather
than warning when not supported
The 'pipe' character type wasn't documented.
TCP uses a <protocol> element, not <wire>
We weren't doing strict validation for protocol and source mode values.
* src/domain_conf.c: replace open coded chr type parsing with
virDomainChrTypeFromString(), retaining the existing semantics
where unknown types are silently mapped to the "null" type and
"pty" is used if none is specified
We keep support for the pty based monitor so that we can re-connect
to VMs started by older versions of libvirtd.
* src/domain_conf.c: handle formatting and parsing unix monitors
* src/qemu_driver.c: add qemudOpenMonitorUnix(), remove the monitor
pty path searching from qemudFindCharDevicePTYs(), switch
qemudStartVMDaemon() and qemuDomainXMLToNative() to using a unix
monitor
* tests/qemuxml2argvtest.c: switch to using a unix monitor
* tests/qemuxml2argvdata/qemuxml2argv-*.args: update test data
There are no functional changes in this patch apart from adding the
monitor type to the state XML.
The patch mostly consists of switching to use virDomainChrDef every
where to describe the monitor.
* src/domain_conf.h: replace monitorpath with monitor_chr
* src/domain_conf.c: handle parsing the monitor type and initializing
monitor chr
* src/qemu_conf.[ch]: make qemudBuildCommandLine take a
virDomainChrDefPtr and use that to build the -monitor parameter
* src/qemu_driver.c: split pty specific and common code from
qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr
* tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change
* src/qemu_driver.c: vm->monitorpath is already initialized in the case
of re-connect, so move the initialization for the normal startup case
out of the common code
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
when starting guests if video card is present
* tests/qemuhelptest.c: Change to use constants instead
of hardcoded hex numbers, and add VGA support
* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
element for testing graphics adapter
* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
* docs/schemas/domain.rng: Define <video> element schema
* src/domain_conf.c, src/domain_conf.h, src/libvirt_private.syms:
Add parsing and formatting for <video> element
* src/network_driver.c src/node_device.c src/storage_driver.c:
many places in the code reported 'No xxx with matching name" after
a Lookup error without reporting the name used by the failed lookup
Fixes startup of guest's with sourceless cdrom devices.
Patch from Cole Robinson originally posted here:
https://bugzilla.redhat.com/499569
but never sent upstream.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
As pointed out by Tim Waugh here:
https://bugzilla.redhat.com/507555
We shouldn't bother trying to set the context of a file if it already
matches what we want.
(Fixed to use STREQ() and not use tabs, as pointed out by danpb)
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This patch was posted ages ago here:
https://bugzilla.redhat.com/493692
But was never posted upstream AFAICT.
Patch from Dan Berrange
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* docs/schemas/network.rng: fix the network schemas to match
new accepted elements, patch by Satoru SATOH
* src/network_conf.c: fix network driver to save the domain name
in XML if present, patch by Satoru SATOH
* AUTHORS: adding Satoru SATOH
Daniel
* src/libvirt.c src/virterror.c: fix some missing comments in public
modules.
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/devhelp/libvirt-libvirt.html docs/html/libvirt-libvirt.html:
regenerated documentation
* po/*: updated the polish localization and regenerated
Daniel
* docs/logging.html[.in] qemud/libvirtd.conf qemud/qemud.c
src/logging.[ch]: cleanup the logging code and docs to remove
all references to log level 0, cleanup hardcoded values and add
a default VIR_LOG_DEFAULT value, patch by Amy Griffis
daniel
* src/libvirt_private.syms src/parthelper.c src/storage_backend_disk.c
src/storage_conf.c src/storage_conf.h: allow to create storage
volumes on disk backend, patches by Henrik Persson
* AUTHORS: add Henrik Persson
Daniel
* src/Makefile.am src/libvirt.c src/libvirt_private.syms src/logging.c
src/logging.h src/util.c src/libvirt_debug.syms: big cleanup of
the debug configuration option and code by Amy Griffis
daniel
* src/qemu_driver.c: fix a domain state problem after
migration, patch by Federico Simoncelli, fixes#507537
* src/domain_conf.c: fix a transcient domain state problem after
destroy, patch by Federico Simoncelli, fixes#507304
* AUTHORS: add Federico Simoncelli and Javier Fontan
daniel
* configure.in libvirt.spec.in src/Makefile.am
src/opennebula/one_client.[ch] src/opennebula/one_conf.h
src/opennebula/one_driver.[ch] : Finish the integration of OpenNebula,
avoid dependancy on OpenNebula libraries, require xmlrpc-c-devel
and build it by default, based on patch by Javier Fontan and DanB
suggestions
Daniel
If using a custom test driver, storage pool file parsing was broken, and
storage volume parsing was never implemented. Fix these issues, and add
some examples in docs/
The storage driver arranges its parsing routines in a way that make them
difficult to use in the test driver for non-default file parsing. This
refactoring moves things to be consistent with the way domain_conf and
network_conf do things.
If specifying a custom test driver, virtual networks were not 'activated'
on driver init. This differs from the behavior of domains and storage pools,
so fix it. Also improve a couple error messages in that area.
virEnumFromString doesn't check for a NULL string, and will segfault if
passed one. Lots of calling code protects against this, but at least
/pool/@type parsing does not.
CreateXMLFrom changes accidentally caused all raw volume creation to be
fully allocated (as though allocation == capacity). Fix this.
Also force CreateXMLFrom to maintain the previous behavior: sparseness
should still be maintained since we search for holes when copying, and the
clone behavior hasn't been tested with anything but the broken behavior.
Rather than numerous instances of:
emulator = vm->def->emulator;
if (!emulator)
emulator = virDomainDefDefaultEmulator(conn, vm->def, driver->caps);
if (!emulator)
return -1;
Set this value at XML parse time in the domain config, so we can depend on
it for all future emulator accesses. There were unchecked accesses in the
qemu driver that were tripping up on this if no emulator was specified in
the XML, see:
http://www.redhat.com/archives/libvir-list/2008-October/msg00602.html
Certain drivers always need an 'emulator' specified in the XML (qemu and lxc
at least). Store this info in capabilities.
We will eventually use this to move default emulator handling out of
drivers and into domain_conf.*
* src/node_device_hal.c src/node_device_conf.[ch]: add support
for serial number in HAL storage backend, patch by Dave Allan
* docs/schemas/nodedev.rng
tests/nodedevschemadata/storage_serial_3600c0ff000d7a2a5d463ff4902000000.xml:
update the schemas and add a test case, also by Dave Allan
Daniel
The KVM version string can be one of the following:
- qemu-kvm-x.y.z in stable releases
- kvm-XX for kvm versions up to kvm-85
- qemu-kvm-devel-XX for kvm version kvm-86 and later
There are only a few of places where we need to detect
differences between KVM versions based on 0.9.1:
1) VNET_HDR introduced in kvm-74
2) -incoming tcp introduced in kvm-79
3) -incoming exec introduced in kvm-80
4) -incoming stdio in all earlier kvm versions
With qemu-kvm-0.10.x, we can now assume that (1) is available
if it's a KVM release, (2) and (3) is always available and
(4) is never available.
So, from now on we should only need to check the qemu version
number and the "is_kvm" flag for detecting feature availability.
We only need the KVM version number for older releases.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This patch is purely re-factoring without any functional changes
to make way for the next patch.
The main thing achieved by the refactoring is that we now have
easier access to the parenthesised string that KVM folks seem
to delight in changing.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* configure.in src/libvirt_private.syms src/storage_backend_fs.c
src/util.c src/util.h: find and use kvm-img, qemu-img or qcow-create
dynamically at runtime, patch by Doug Goldstein
* AUTHORS: add Doug Goldstein
Daniel
* src/Makefile.am src/node_device.[ch] src/node_device_conf.[ch]
src/node_device_hal.[ch] src/node_device_hal_linux.c
src/qemu_driver.c src/remote_internal.c src/storage_backend.c
src/virsh.c src/xen_unified.c tests/nodedevxml2xmltest.c
po/POTFILES.in: implementation for node device create and destroy
in NPIV support, patch by David Allan
Daniel
If two virtual networks have the same hardcoded bridge device (which
prevents them from being active simultaneously) we still want to define
them at daemon startup, so the user has a fighting chance of correcting
the XML error.
Add an extra flag to SetBridge to avoid reporting an error if there is
a bridge collision, and use this when loading network configs at startup.
This regressed via commit 4c3f3b4d.
Parse the command line output a bit earlier so we have a better chance
of reporting the full error output on failure.
I hit this when QEMU would try to boot an invalid kernel (virtinst bug).
There is different spacing when listing active vs. inactive networks. Ex:
Name State Autostart
-----------------------------------------
default active yes
xxxxxx inactive no
* src/qemu_conf.c docs/schemas/domain.rng
tests/capabilityschemadata/caps-qemu-kvm.xml: PPC Qemu Machine Type
changed from g3bw to g3beige some time ago, patch by Thomas Baker
Daniel
* src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
the OpenNebula driver
* configure.in include/libvirt/virterror.h qemud/Makefile.am
qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
src/libvirt.c src/virterror.c: integration of the OpenNebula
driver in the libvirt infrastructure
* AUTHORS: add Abel Miguez Rodriguez
daniel
* qemud/qemud.c src/console.c src/network_driver.c
src/node_device_conf.c src/node_device_hal.c src/storage_conf.c
src/util.c: cleanup of some direct stderr logging
daniel
There is some funkiness here, since we are either dealing with 2 different
pools (which means validation x 2) or the same pool, where we have to be
careful not to deadlock.
The cap_lost and prop_modified callbacks could deadlock if an existing
device needed to be refreshed, since dev_create expects the driver to
be unlocked.
* docs/schemas/domain.rng src/domain_conf.[ch] src/qemu_driver.c:
extend the generic code for the RDP and desktop extensions of
the graphic tag needed for vbox, patch by Pritesh Kothari
Daniel
Improves readability, particularly wrt the pending CreateFromXML changes.
This will also help implementing File->Block volume creation in the future,
since some of this code will need to be moved to a backend agnostic file.
vol-clone is a convenience function, requiring only a volume to clone and a
new name.
vol-create-from is a direct mapping to the public API, which allows cloning
across pools, converting between formats, etc, but requires an xml file to be
passed
By checking the pid every retry period, we can quickly determine if
the process crashed at startup, rather than make the user wait for
the entire timeout (3 seconds).
virExec will write out the pid of the daemonized process only. Use this
in the QEMU driver, rather than QEMU's pidfile, so we can catch errors we
might miss if the emulator bails early.
Wraps __virExec with the VIR_EXEC_DAEMON flag. Waits on the intermediate
process to ensure we don't end up with any zombies, and differentiates between
original process errors and intermediate process errors.
* src/domain_conf.[ch] docs/schemas/domain.rng: add support
for internal network in the generic part of the code, and
update the Relax-NG grammar accordingly, patch by Pritesh Kothari
daniel
* src/domain_conf.c src/domain_conf.h: parse and save multiple
graphics elements instead of one, patch by Pritesh Kothari
* src/qemu_conf.c src/qemu_driver.c: adapt the qemu/kvm driver for
the new structures, patch by Pritesh Kothari
* src/xend_internal.c src/xm_internal.c: same thing for Xen drivers
Daniel
This change:
Tue Mar 3 08:55:13 GMT 2009 Daniel P. Berrange <berrange@redhat.com>
Don't try to detach & reset PCI devices while running test
suite for XML-> ARGV conversion.
* src/qemu_driver.c: Add qemuPrepareHostDevices() helper to
detach and reset PCI devices.
* src/qemu_conf.c: Don't detach & reset PCI devices while
building the command line argv
accidentally did this:
- if (hostdev->managed) {
+ if (!hostdev->managed) {
Which results in managed='yes' not causing the device to be
detached when the guest is starting.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* src/vbox/vbox_driver.c src/vbox/vbox_tmpl.c: changes in
VirtualBox driver version detection and move informations
from a global variable into a driver structure, patch by Pritesh
Kothari.
Daniel
* src/libvirt_private.syms src/storage_backend.h
src/storage_backend_fs.c src/storage_conf.h src/storage_driver.c:
drop the pool lock when allocating fs volumes, patch by Cole Robinson
daniel
* configure.in include/libvirt/virterror.h src/Makefile.am
src/domain_conf.[ch] src/driver.h src/virterror.c src/vbox/README
src/vbox/vbox_CAPI_v2_2.h src/vbox/vbox_V2_2.c
src/vbox/vbox_XPCOMCGlue.[ch] src/vbox/vbox_driver.[ch]
src/vbox/vbox_tmpl.c: integration of the VirtualBox support
patches by Pritesh Kothari
Daniel
Seems like a simple typo - it has been "format=" since the flag
was introduced, but we added it as "fmt=".
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Fixes:
CHECK: avoid_if_before_free
src/lxc_container.c: if (oldroot) VIR_FREE(oldroot)
src/lxc_container.c: if (newroot) VIR_FREE(newroot)
Makefile.maint: found useless "if" before "free" above
and:
src/lxc_container.c:317:
Makefile.maint: found trailing blank(s)
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* src/libvirt_private.syms src/storage_backend_fs.c src/util.c
src/util.h: use posix_fallocate() on supported systems to
allocate diskspace faster, patches by Amit Shah
Daniel
* docs/schemas/domain.rng src/domain_conf.c src/domain_conf.h
src/qemu_conf.c
tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml:
adds a new <hostdev managed='(yes|no)'> property
to host devices indicating whether or not we should
automatically dettach/reset, patch by Mark McLoughlin
daniel
* qemud/remote.c qemud/remote_dispatch_args.h
qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_table.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x src/remote_internal.c: Implement
attach/reattach/reset in the remote driver, patch by Mark
McLoughlin.
Daniel
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/driver.h src/libvirt.c src/libvirt_public.syms
src/lxc_driver.c src/openvz_driver.c src/qemu_driver.c
src/test.c src/uml_driver.c: add the public APIs for
virNodeDeviceDettach virNodeDeviceReAttach and virNodeDeviceReset
and extends the driver structure accordingly.
Daniel
* configure.in po/POTFILES.in src/Makefile.am src/libvirt_private.syms
src/pci.c src/pci.h: Add implementations of dettach, reattach and
reset for PCI devices, patch by Mark McLoughlin
Daniel
Add support for parsing node device XML descriptions.
This will be used by PCI passthrough related functions to
obtain the PCI device address for a given node device.
The 'asprintf' -> 'virAsprintf' transition made in
[043d702f] "use virAsprintf instead of asprintf" introducted
a build error for 'driver.c' as 'util.h' has to be included.
Signed-off-by: Maximilian Wilhelm <max@rfc2324.org>
The 'getVer' fix introducted in d88d459d [Allow remote://hostname/
style URIs for automatic driver probe...] breaks compiling libvirt
with loadable module support. Work around this to get it building again.
Signed-off-by: Maximilian Wilhelm <max@rfc2324.org>
* configure.in: Enable internal WITH_BRIDGE support not just for LXC or
QEMU, but also for --with-network. Russell Haering reported that
compilation failed when configured with --without-lxc --without-qemu.
Details: http://thread.gmane.org/gmane.comp.emulators.libvirt/11928
* src/bridge.h: Use #if WITH_BRIDGE, rather than currently-equivalent
"#if defined(WITH_QEMU) || defined(WITH_LXC)"
bridge.c: In function 'brSetInetAddr':
bridge.c:665: error: dereferencing pointer '({anonymous})' does break strict-aliasing rules
bridge.c:665: note: initialized from here
bridge.c:666: error: dereferencing pointer '({anonymous})' does break strict-aliasing rules
bridge.c:666: note: initialized from here
Fix qemud.c warnings with gcc-4.4
qemud.c: In function ‘remoteListenTCP’:
qemud.c:675: error: dereferencing pointer ‘sa.72’ does break strict-aliasing rules
qemud.c:675: note: initialized from here
qemud.c:678: error: dereferencing pointer ‘sa.73’ does break strict-aliasing rules
qemud.c:678: note: initialized from here
* src/test.c (testNetworkCreate, testNetworkDefine): Since "def" is
set to NULL immediately after any vir*AssignDef call (to indicate we
no longer own it and to ensure no clean-up path mistakenly frees it),
dereference via net->def->, not def->.
* src/iptables.c: Include "virterror_internal.h".
Use virStrerror, not strerror.
* src/iptables.c (notifyRulesUpdated): Use %s rather than
string-concatenation that made sc_unmarked_diagnostics report
a false-positive.
* src/qemu_driver.c: Use virSetCloseExec and virSetNonBlock,
rather than qemuSet* functions. Suggested by Daniel P. Berrange.
* src/util.c (virSetCloseExec): Publicize.
* src/util.h (virSetCloseExec): Declare
* src/libvirt_private.syms: Add virSetCloseExec.
...thus eliminating many uses of strerror.
(kvmGetMaxVCPUs): Rather than merely warning, diagnose an error
and return -1 upon failure to open KVM_DEVICE. Suggested by
Daniel P. Berrange.
* src/qemu_conf.c (uname_normalize): New function, factored out of...
(qemudBuildCommandLine): ...here. Use the new function.
(qemudExtractVersion): Use it here, rather than hard-coding "i686".
IFF_VNET_HDR is a tun/tap flag that allows you to send and receive
large (i.e. GSO) packets and packets with partial checksums. Setting
the flag means that every packet is proceeded by the same header which
virtio uses to communicate GSO/csum metadata.
By enabling this flag on the tap fds we create, we greatly increase
the achievable throughput with virtio_net.
However, we need to be careful to only set the flag when a) QEMU has
support for this ABI and b) the value of the flag is queryable using
the TUNGETIFF ioctl.
It's nearly five months since kvm-74 - the first KVM release with this
feature - was released. Up until now, we've not added libvirt support
because there is no clean way to detect support for this in QEMU at
runtime. A brief attempt to add a "info capabilities" monitor command
to QEMU floundered. Perfect is the enemy of good enough. Probing the
KVM version will suffice for now.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* src/virterror.c (virStrerror): New function.
(virReportSystemErrorFull): Don't leak "combined".
In fact, don't even attempt allocation.
Do include the result of formatted print in final diagnostic.
* src/proxy_internal.c (xenProxyCommand): Mark a diagnostic.
* src/xen_unified.c (xenUnifiedOpen, xenUnifiedAddDomainInfo):
Fix unmarked diagnostics by removing the diagnostic altogether:
replace each xenUnifiedError(...,VIR_ERR_NO_MEMORY call with a
call to virReportOOMError.
* src/network_driver.c (networkEnableIpForwarding): This function
would always return 1 (success). Now it returns 0 upon write or
close failure, being careful to preserve any errno from a write failure.
Add comments.
domain shutdown and read saved vm status on libvirtd startup,
last 2 patches from Guido Günther finishing up the surviving the
libvirt daemon restart
daniel
* qemud/qemud.c (remoteReadConfigFile): Don't return 0 (success)
when the config file is unreadable or nonexistent
Return -1, not 0, upon virConfReadFile failure.
(main): If remote_config_file is not specified via --config(-f),
use the default config file only if it exists. Otherwise,
use /dev/null.
* src/conf.c (virConfReadFile): Don't diagnose virFileReadAll
failure, since it already does that.
src/uml_driver.c src/util.c src/util.h src/xen_unified.c:
unify hostname lookup using virGetHostname convenience function,
patch by David Lutterkort
daniel
* configure.in: Provide a new --with-bridge option.
* src/Makefile.am (PRIVSYMFILES) [WITH_BRIDGE]: Append libvirt_bridge.syms.
* src/bridge.c: Test WITH_BRIDGE rather than particular drivers.
* src/libvirt_private.syms: Move bridge-related symbols into...
* src/libvirt_bridge.syms: ...this new file.
Author: John Levon
* src/logging.h src/logging.c: add the infrastructure and internal
APIs for logging, some of those APIs should be made public later
* src/libvirt_sym.version.in: flag the internal APIs as such
daniel
qemudCapsInitNUMA and umlCapsInitNUMA were identical, so this change
factors them into a new function, virCapsInitNUMA, and puts it in
nodeinfo.c.
In addition to factoring out the duplicates, this change also
adjusts that function definition (along with its macros) so
that it works with Fedora 9's numactl version 1, and makes it
so the code will work even if someone builds the kernel with
CONFIG_NR_CPUS > 4096.
Finally, also perform this NUMA initialization for the lxc
and openvz drivers.
* src/nodeinfo.c: Include <stdint.h>, <numa.h> and "memory.h".
(virCapsInitNUMA): Rename from qemudCapsInitNUMA and umlCapsInitNUMA.
(NUMA_MAX_N_CPUS): Define depending on NUMA API version.
(n_bits, MASK_CPU_ISSET): Define, adjust, use uint64 rather than long.
* src/nodeinfo.h: Include "capabilities.h".
(virCapsInitNUMA): Declare it.
* examples/domain-events/events-c/Makefile.am:
* src/Makefile.am: Add $(NUMACTL_CFLAGS) and $(NUMACTL_LIBS) to various
compile/link-related variables.
* src/qemu_conf.c: Include "nodeinfo.h".
(qemudCapsInitNUMA): Remove duplicate code. Adjust caller.
* src/uml_conf.c (umlCapsInitNUMA): Likewise.
Include "nodeinfo.h".
* src/lxc_conf.c: Include "nodeinfo.h".
(lxcCapsInit): Perform NUMA initialization here, too.
* src/openvz_conf.c (openvzCapsInit): And here.
Include "nodeinfo.h".
* src/libvirt_sym.version.in: Add virCapsInitNUMA so that libvirtd
can link to this function.
* src/storage_backend_fs.c: Don't include <endian.h> or <byteswap.h>.
(LV_BIG_ENDIAN, LV_LITTLE_ENDIAN): Define.
Use those instead of __BIG_ENDIAN and __LITTLE_ENDIAN.
This change is required on some kernels due to the way a change in
the kernel's CONFIG_NR_CPUS propagates through the numa library.
* src/qemu_conf.c (qemudCapsInitNUMA): Pass numa_all_cpus_ptr->size/8
as the buffer-length-in-bytes in the call to numa_node_to_cpus, since
that's what is required on second and subseqent calls.
* src/uml_conf.c (umlCapsInitNUMA): Likewise.
This is the second part of the change mentioned here:
http://thread.gmane.org/gmane.comp.emulators.libvirt/10331
It removes the essentially redundant "optname" parameter
from each of the vshCommandOptNetworkBy and vshCommandOptDomainBy
functions as well as the correspond macros (without "By" suffix).
Now, instead of always passing the optname, "domain", to
vshCommandOptDomainBy, that function requires that its command
argument refer to an opts array containing a "domain" option.
This normalization makes one more help-related change:
it renames the net-start "name" argument to the more
sensible and consistent "network".
* src/virsh.c (VSH_BYNAME, vshCommandOptDomain)
(cmd_has_option): New function, used in vshCommandOptDomainBy
and vshCommandOptNetworkBy.
(vshCommandOptDomainBy, vshCommandOptNetworkBy): Remove the optname
parameter, it's always "domain" ("network"). Update all callers.
Call cmd_has_option.
(vshCommandOptNetwork, cmdAutostart, cmdConsole, cmdDomstate)
(cmdDomblkstat, cmdDomIfstat, cmdSuspend, cmdUndefine, cmdStart)
(cmdSave, cmdSchedinfo, cmdDump, cmdResume, cmdShutdown)
(cmdReboot, cmdDestroy, cmdDominfo, cmdVcpuinfo, cmdVcpupin)
(cmdSetvcpus, cmdSetmem, cmdSetmaxmem, cmdDumpXML, cmdDomname)
(cmdDomid, cmdDomuuid, cmdMigrate, cmdNetworkAutostart)
(cmdNetworkDestroy, cmdNetworkDumpXML, cmdNetworkName)
(opts_network_start, cmdNetworkStart, cmdNetworkUndefine)
(cmdNetworkUuid, cmdVNCDisplay, cmdTTYConsole, cmdAttachDevice)
(cmdDetachDevice, cmdAttachInterface, cmdDetachInterface)
(cmdAttachDisk, cmdDetachDisk, cmdEdit)
* src/Makefile.am (virsh-pool-edit.c): This code is generated
from cmdEdit, and cmdEdit uses the vshCommandOptDomain macro which
now, with the changes above, has only 3 (was 4) arguments, yet the
macro use is mapped to vshCommandOptPool, which still requires 4
arguments. So this change adjusts the sed code to reinsert the
just-removed argument -- we're not changing pool-related code right
now, because it's not as straight-forward.
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.args
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml:
slightly modified patch for SDL fullscreen from Itamar Heim
* docs/formatdomain.html docs/formatdomain.html.in docs/libvirt.rng:
update the schemas and docs about the sdl graphic element attributes
* AUTHORS: add Itamar Heim
Daniel
* src/virsh.c (cmdPoolStart, cmdStart): Change hard-coded
vshCommandOptDomainBy string argument to match just-changed
option name. Cole Robinson reported that "virsh start" was
broken and provided that part of the fix.
Bug introduced by yesterday's "virsh.c: tweak options to produce
more accurate help".
* tests/start: New file. Test for the above fix.
* tests/Makefile.am (test_scripts): Add start.
have udevsettle. So change our tests to prefer udevadm if it exists, but
to fall back to udevsettle if it does not.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
really should be synchronizing against udev. This is generally done by a call
to udevsettle, which is exactly what this patch implements for the storage
backends that are likely to create new /dev nodes. I believe I've read that
even after udevsettle, you are not guaranteed that devices are all the way
created, so we still need the polling in the rest of the sources, but this
should give us a much better chance of things existing as we expect.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
creation of /dev/disk/by-{id,path}, so if we fail to open the directory, retry
up to 5 seconds. This is only likely to happen on hosts that are:
1) diskless (so /dev/disk/by-{id,path} doesn't exist already), and
2) slow, and/or heavily loaded (meaning that udev can take some time to create
the /dev nodes).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* configure.in docs/* NEWS: release of 0.5.0
* po/*: updated from the translators and merged
* docs/apibuild.py src/libvirt.c: avoid some warnings at doc
generation time
daniel
* tests/virsh-synopsis: new file
* tests/Makefile.am (test_scripts): Add virsh-synopsis.
* src/virsh.c: Correct help SYNOPSIS for each of seven commands.
When I first ran this script, "make check" failed like this:
...
invalid help SYNOPSIS for net-create:
create a network from an XML <file>
invalid help SYNOPSIS for net-define:
define a network from an XML <file>
invalid help SYNOPSIS for net-start:
start <network>
invalid help SYNOPSIS for pool-create:
create a pool from an XML <file>
invalid help SYNOPSIS for pool-define:
define a pool from an XML <file>
invalid help SYNOPSIS for pool-start:
start <pool>
invalid help SYNOPSIS for vol-create:
create <file>
FAIL: virsh-synopsis
* qemud/remote.c qemud/remote_dispatch_localvars.h
qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x src/driver.h src/libvirt.c
src/libvirt_internal.h src/libvirt_sym.version src/lxc_driver.c
src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
src/remote_internal.c src/test.c src/virsh.c: large patch to
add migration support for KVM/QEmu, based on the work of Rich Jones
and Chris Lalancette. This introduce a new version of the prepare
and finish steps of the migration, so changes the driver API and
a lot of code.
Daniel
ability to resolve any kind of volume path to the pool target volume
path. For instance, if the pool was defined with a
<target><path>/dev/disk/by-id</path></target> section, and one of the
volumes is /dev/disk/by-id/scsi-S_beaf11, then you would be able to
call virStorageVolLookupByPath("/dev/sdc"), and get the correct volume
back.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/socketcompat.h: Remove file.
* src/remote_internal.c: Don't include socketcompat.h.
* qemud/qemud.h: Likewise.
* qemud/remote_protocol.x: Likewise, but do include <arpa/inet.h>
for htonl.
* src/remote_internal.c: Likewise, but do include <errno.h>.
* qemud/remote_protocol.c: Regenererate.
* qemud/remote_protocol.h: Regenererate.
* src/Makefile.am (REMOTE_DRIVER_SOURCES): Remove socketcompat.h.
* src/storage_backend.c (backends): Add a NULL terminator.
(virStorageBackendForType): Use NULL terminator rather than
warning-provoking (possibly 0) array size.
<sources> tags properly, and I didn't put the <source> tag into the
proper place, so I totally changed the output of the discovery XML.
Fix this up to do the right thing.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/libvirt.c src/libvirt_sym.version: new libvirt event entry
points, big patch provided by Ben Guthro
* Makefile.am configure.in src/driver.h src/event.c src/event.h
src/internal.h src/libvirt.c src/libvirt_sym.version src/lxc_driver.c
src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
src/remote_internal.c src/storage_backend_fs.c src/test.c
qemud/event.c qemud/event.h qemud/mdns.c qemud/qemud.c
qemud/qemud.h qemud/remote.c qemud/remote_dispatch_localvars.h
qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x proxy/Makefile.am python/generator.py:
Not much is left untouched by the patch adding the events support
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/html/libvirt-libvirt.html: regenerated the docs
* examples/domain-events/events-c/Makefile.am
examples/domain-events/events-c/event-test.c: a test example
* AUTHORS: added Ben Guthro
daniel
findPoolSources. Given danpb's last feedback, I completely removed the XML
parsing and did it all with structures. The result should (hopefully) be a lot
easier on the eyes, and is a little more generic.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
cleanup patch, add a ".defaultFormat" member to .poolOptions. In
storage_conf.c, if virXPathString(/pool/source/format/@type) returns NULL, then
set the pool type to .defaultFormat; otherwise, lookup the type via
formatFromString.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
<pool type='logical'>
<source>
<name>MyVG</name>
<device name='/dev/sdb'/>
...
However, dumping out the XML for this same storage pool (with, say, virsh
pool-dumpxml), gives:
<pool type='logical'>
<source>
<name>MyVG</name>
<device name='/dev/sdb'>
</device>
To make this more idempotent, do the <device name='/dev/sdb'/> form by default,
and only do the <device>...</device> form if .nfreeExtent is defined for the
storage pool.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
and virStorage*ToString implementations to the generic VIR_ENUM_IMPL, there were
a couple of places that didn't properly set errors when they failed. This patch
fixes these places up.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
storage XML to libvirtd, which was saved in /etc/libvirt/storage. On subsequent
stop/start of libvirtd, because of another bug , an
error wasn't being set properly in an error path, so libvirtd was SEGV'ing in
storage_conf.c:virStoragePoolObjLoad when trying to dereference the NULL err
returned from virGetLastError(). Make this more robust against errors by always
doing "err ? err->message : NULL" in the printf. I looked around the tree and
found a couple of other places that weren't guarded, so this patch fixes them as
well.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* Makefile.maint (sync-vcs-ignore-files): New target.
Prompted by a patch from James Morris.
http://thread.gmane.org/gmane.comp.emulators.libvirt/8619/focus=8773
Add all (now-generated) .gitignore files.
* .gitignore: New file.
* build-aux/.gitignore: New file.
* docs/.gitignore: New file.
* docs/devhelp/.gitignore: New file.
* docs/examples/.gitignore: New file.
* docs/examples/python/.gitignore: New file.
* gnulib/lib/.gitignore: New file.
* gnulib/lib/arpa/.gitignore: New file.
* gnulib/lib/netinet/.gitignore: New file.
* gnulib/lib/sys/.gitignore: New file.
* gnulib/tests/.gitignore: New file.
* include/.gitignore: New file.
* include/libvirt/.gitignore: New file.
* po/.gitignore: New file.
* proxy/.gitignore: New file.
* python/.gitignore: New file.
* python/tests/.gitignore: New file.
* qemud/.gitignore: New file.
* src/.gitignore: New file.
* tests/.gitignore: New file.
* tests/confdata/.gitignore: New file.
* tests/sexpr2xmldata/.gitignore: New file.
* tests/virshdata/.gitignore: New file.
* tests/xencapsdata/.gitignore: New file.
* tests/xmconfigdata/.gitignore: New file.
* tests/xml2sexprdata/.gitignore: New file.
iSCSI volumes. This is implemented in the
virStorageBackendUpdateVolInfoFD function, so all future callers will
automatically benefit. This is a somewhat large patch because the
conversion of the virStorageBackendPartTableTypeToString necessitated
a change to the formatToString and formatFromString function pointers,
which caused fallout in other places in the storage stuff. The good
news is that most of these callers are now converted over to the
VIR_ENUM_IMPL, which means a lot of redundant code is now gone.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
POTFILES.in. Add it there, and then fix up one warning about included
c-ctypes.h that wasn't being used.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/storage_backend_logical.c: enable stop pool in logical backend
improve portability when deleting a pool and also call pvremove
patch by Chris Lalancette
Daniel
* src/network_conf.c src/network_conf.h src/qemu_driver.c: add
support for a domain name in network configurations, patch by
JJ Reynolds with bugfix raised by Dan
* src/openvz_conf.c: fix to small bug in openvzReadConfigParam
by Evgeniy Sokolov
Daniel
This patch adds an implementation of the version function to the LXC driver.
The providers use the hypervisor version in a field of one of the instances,
so we need to have something meaningful here. AFAICT, the only real option
we have (considering the limitations of the libvirt version information) is
to use the kernel version.
* src/qemu_conf.c: patch from Cole Robinson to report in the
capabilities only the ones where the emulators is actually found
* po/libvirt.pot: regenerated
* src/libvirt.c: small typo fix
Daniel
* src/storage_backend.h src/storage_backend_logical.c
src/storage_conf.c src/storage_conf.h src/virsh.c:
Applied patches from David Lively to add storage source
elements needed for storage pool
* docs/formatstorage.html docs/formatstorage.html.in: associated
documentation
Daniel
* src/util.c (virFileReadLimFP): New function.
(__virFileReadLimFD): New function.
* src/util.h (__virFileReadLimFD): Declare.
(virFileReadLimFD): Define.
(virFileReadAll): Rewrite to use virFileReadLimFP.
* src/qemu_conf.c: fix serial/telnet to use "server" option
rather than "listen"
* tests/qemuxml2argvdata/qemuxml2argv-serial-tcp-telnet.args:
fix the test case too
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
src/qemu_driver.c: patch from Guido Günther allowing to add
disk as USB devices
* docs/libvirt.rng: extend the schemas for the new value
* tests/qemuxml2argvdata/qemuxml2argv-disk-usb.args
tests/qemuxml2argvdata/qemuxml2argv-disk-usb.xml
tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: add a specific
test to the regression suite
Daniel
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
src/qemu_driver.c: Patch from Guido Günther allowing to pass
usb devices to qemu/kvm
* docs/libvirt.rng: add the new functionality to the grammar
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.args
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml
tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: adding examples
to the regression tests
* libvirt.spec.in: fix the licence tag
Daniel
Use inet_pton instead; pull in gnulib's module by the same name.
* src/network_conf.c (virNetworkDefParseXML): Use inet_pton,
rather than inet_aton.
* bootstrap (modules): Add inet_pton.
* gnulib/lib/inet_pton.c: New file, from gnulib.
the regression tests. The problem is that the xenDaemonFormatSxpr{Disk,Net}
functions are shared between domain creation time and attaching disk time.
Unfortunately, though, Xend expects something different during these two times.
During domain creation time, it wants the "(device" in front of the sexpr,
while during attach time it does not. To remedy this situation, I added a flag
to these two functions to differentiate between these two modes. With this
patch in place, all of the regression tests pass.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
code, a couple of bugs were introduced into the attach-disk and attach-interface
functionality. This patch fixes 3 bugs:
1) In xenDaemonAttachDevice(), there is a switch statement to determine which
of the xenDaemonFormatSxpr{Disk,Net} functions to call. Unfortunately, the case
statements are all missing the corresponding "break", so we always fall-through
to the default error case. This patch just adds the appropriate break statements.
2) (minor) In xenDaemonDomainDefineXML (that's a mouthful!), there is a stray
"fprintf". This is now converted to a proper virXendError().
3) xenDaemonFormatSxpr{Disk,Net} were adding an extra (device to the front of
the sexpr expressions that xend did not expect (this is Xend on RHEL 5.2).
Because of this, the attaches would fail. The patch fixes this by removing the
(device from the front, which makes attach-disk and attach-interface work again.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
part, this doesn't really concern libvirt, since for things like attach and
detach we just pass it through and let xend worry about whether it is supported
or not. The one place this breaks down is in the stats collecting code, where
we need to figure out the device number so we can go digging in /sys for the
statistics.
To remedy this, I've re-written xenLinuxDomainDeviceID() to use regular
expressions to figure out the device number from the name. The major advantage
is that now xenLinuxDomainDeviceID() looks fairly identical to
tools/python/xen/util/blkif.py (in the Xen sources), so that adding additional
devices in the future should be much easier. It also reduces the size of the
code, and, in my opinion, the code complexity.
With this patch in place, I was able to get block statistics both on older style
devices (/dev/xvda) and on the new, expanded devices (/dev/xvdaa).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/virsh.c: Implement 'virsh edit', 'virsh net-edit' and
'virsh pool-edit' commands. These edit the XML for domains,
networks and storage pools respectively, and are the
equivalent of doing 'virsh dumpxml; vi foo.xml; virsh define'
* src/Makefile.am, src/.cvsignore: Auto-generate the net-edit
and pool-edit commands.
* docs/virsh.pod: Updated the documentation.
* src/domain_conf.c, src/network_conf.c, src/storage_conf.c:
Improve error messages from commands such as 'virsh define'
when the XML is not well-formed by passing libxml2 errors
back out through virterror.
docs/libvirt-refs.xml docs/html/libvirt-libvirt.html src/libvirt.c:
fixed somedocs and API entry point descriptions as suggested by
Charles Duffy and regenerated the API descriptions.
Daniel
Per subject; if autoport is in use for a host, the current
virDomainGraphicsDefFormat code always emits "port=-1", even if a port
is assigned to the host; this leaves no way for a client to find the VNC
port assigned to the host in question.
This patches fixes it by putting the vncport in place if there is one, and
only putting "-1" if we fail that test.
handling code. In particular, if you had a section of XML like:
<disk type='file' device='cdrom'>
<target dev='hdc' bus='ide'/>
<readonly/>
</disk>
This used to work with older libvirt, but now fails. This is because we are
actually passing the literal string (null) to the qemu command-line, which qemu
barfs on. This patch fixes it up by making it blank, which allows qemu to
continue on it's merry way.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/domain_conf.[ch] src/openvz_conf.[ch] src/openvz_driver.c:
patch from Evgeniy Sokolov doing the OpenVZ xml refactoring,
still needs to be ported to the new XML parsing code but
implements the new format.
Daniel
* src/virsh.c (cmdUndefine): Tell user to shutdown and then use name or UUID.
* tests/undefine: New test. Exercise virsh's undefine command.
* tests/Makefile.am (test_scripts): Add undefine.
* src/openvz_conf.c src/openvz_conf.h src/openvz_driver.c
Makefile.maint: patch from Evgeniy Sokolov cleaning up the
error function used and format check based on Jim's fedback.
Daniel
Allow check for containers support to be done without CLONE_NEWNET, and then
determine support on the fly by checking for iproute2 support and a
successful clone(CLONE_NEWNET). This lets us set a flag for later, as well
as not completely disable LXC support on a system without NETNS support.
release
* src/xm_internal.c: fix xm driver serialization escapes
* tests/xmconfigtest.c tests/xmconfigdata/test-escape-paths.cfg
tests/xmconfigdata/test-escape-paths.xml: add test for previous
problem
Daniel
* src/util.c (fread_file_lim): Use VIR_REALLOC_N, not VIR_ALLOC_N.
Bug introduced in 895d0fdf5b.
* tests/Makefile.am (test_scripts): Add read-bufsiz.
* tests/read-bufsiz: New test for the above.
fine, except that is subtly alters the semantics of malloc(), calloc(), and
realloc(). In particular, if you say:
foo = malloc(0);
glibc will happily return a non-NULL pointer to you. However, with the new
memory management stuff, if you say:
foo = VIR_ALLOC(0);
you will actually get a NULL pointer back. Personally, I think this is a
dangerous deviation from malloc() semantics that everyone is used to, and is
indeed causing problems with the remote driver. The short of it is that the
remote driver allocates memory on behalf of the remote side using VIR_ALLOC_N,
and this call is returning NULL so that the NULL checks elsewhere in the code
fire and return failure.
The attached patch fixes this situation by removing the 0 checks from the memory
allocation paths, and just lets them fall through to the normal malloc(),
calloc(), or realloc() routines, restoring old semantics.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
introduced into the qemudNetworkIfaceConnect() function. In particular, there
is a call:
if (VIR_ALLOC_N(vm->tapfds, vm->ntapfds+2) < 0)
goto no_memory;
However, the tapfds structure is used to track *all* of the tap fds, and is
called once for each network that is being attached to the domain. VIR_ALLOC_N
maps to calloc(). So the first network would work just fine, but if you had
more than one network, subsequent calls to this function would blow away the
stored fd's that were already there and fill them all in with zeros. This
causes multiple problems, from the qemu domains not starting properly to
improper cleanup on shutdown. The attached patch just changes the VIR_ALLOC_N()
to a VIR_REALLOC_N(), and everything is happy again.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
to only rely on sysfs for finding LUNs, given a session number. Along the way,
it also fixes the bug where we wouldn't find LUNs for older kernels (with the
block:sda format), and also fixes a race condition where we could try
to find the LUN before udev has finished connecting it.
This patch fixes a few different bugs:
1) We weren't finding LUNs on pre 2.6.24 kernels
2) libvirtd sysfs scanning was racing with udev, so we didn't always see LUNs
3) We weren't showing the 0'th LUN, although that can be a valid LUN
Signed-off-by: Chris Lalancette <clalance@redhat.com>
first logging in; we don't need to do it for logout. Move the sendtarget
command into the Login() function.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
--mode session" command. However, just running "iscsiadm --mode session" seems
to work on all version of iscsiadm commands back to FC-6, so just use that.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
*not* virStorageReportError() if the fork()/exec() process it spawned returned a
!= 0 exit code. Rather, it returns the exitcode in this case, and it is up to
the higher level to determine whether this is a fatal error or not. The use
case for this change is in the iSCSI stuff; older versions of iscsiadm tools
would return a failure when getting the session number, despite the command
succeeding.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* include/libvirt/libvirt.h.in, src/libvirt.c, src/driver.h,
src/libvirt_sym.version: New virDomainMemoryPeek API.
* qemud/remote.c, qemud/remote_protocol.x, src/remote_internal.c:
Support for remote.
* src/qemu_driver.c: QEMU driver implementation of API.
* src/test.c: Test driver (null) implementation of API.
* docs/hvsupport.html.in: Document API.
* libvirt.spec.in: New path /var/cache/libvirt for temporary
storage of memory images.
* qemud/libvirtd.init.in: Remove any old temp files in
/var/cache/libvirt on restarts.
* src/Makefile.am: make install creates /var/cache/libvirt.
* configure.in: Detect mkdir -p.
* src/lxc_driver.c: Make console element is output only. Always open new
PTY when starting a container.
Fix string overrun when storing console name in VM def struct
* configure.in: Document AC_SYS_LARGEFILE.
* docs/hvsupport.html.in: Document HV support for virDomainBlockPeek.
* include/libvirt/libvirt.h.in, src/driver.h, src/libvirt.c,
src/libvirt_sym.version: Add virDomainBlockPeek infrastructure.
* src/qemu_driver.c, src/test.c: Null versions of this call.
* src/xen_unified.c, src/xend_internal.c, src/xend_internal.h,
src/xm_internal.c, src/xm_internal.h: Xen implementation.
* tests/sexpr2xmldata/sexpr2xml-curmem.xml,
tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: XML output
has been reordered slightly in the Xen driver, but should be
functionally the same.
Mon May 12 23:32:21 PST 2008 David L. Leskovec <dlesko@linux.vnet.ibm.com>
* src/lxc_driver.c: Add sanity of tty pid before kill()
Ignore ECHILD errors during VM cleanup
Call functions to store tty pid and cleanup tty pid file
* src/lxc_conf.h: Add function to verify container process exists
Add facilities to manage storing the tty forward process pid
* src/lxc_conf.c: Add function to verify container process exists
Call function to verify container process during config load
Add facilities to manage storing the tty forward process pid
Call function to load tty pid during load config
* include/libvirt/libvirt.h.in: Add VIR_DEPRECATED macro.
* src/internal.h: Internal code is allowed to use deprecated
features, so override VIR_DEPRECATED here.
* include/libvirt/virterror.h: Deprecate the conn, dom and net
fields in the _virError structure.
Up to now, we've been avoiding ctype functions like isspace, isdigit,
etc. because they are locale-dependent. Now that we have the c-ctype
functions, we can start using *them*, to make the code more readable
with changes like these:
- /* This may not work on EBCDIC. */
- if ((*p >= 'a' && *p <= 'z') ||
- (*p >= 'A' && *p <= 'Z') ||
- (*p >= '0' && *p <= '9'))
+ if (c_isalnum(*p))
- while ((*cur >= '0') && (*cur <= '9')) {
+ while (c_isdigit(*cur)) {
Also, some macros in conf.c used names that conflicted with
standard meaning of "BLANK" and "SPACE", so I've adjusted them
to be in line with the definition of e.g., isblank.
In addition, I've wrapped those statement macros with do {...} while (0),
so that we can't forget the ";" after a use. There was one like that
already (fixed below). The missing semicolon would mess up automatic
indenting.
* src/buf.c (virBufferURIEncodeString):
* src/conf.c (IS_EOL, SKIP_BLANKS_AND_EOL, SKIP_BLANKS)
(virConfParseLong, virConfParseValue, virConfParseName)
(virConfParseSeparator, virConfParseStatement, IS_BLANK, IS_CHAR)
(IS_DIGIT, IS_SPACE, SKIP_SPACES):
* src/nodeinfo.c:
* src/qemu_conf.c (qemudParseInterfaceXML):
* src/qemu_driver.c (qemudDomainBlockStats):
* src/sexpr.c:
* src/stats_linux.c:
* src/util.c (virParseNumber, virDiskNameToIndex):
* src/uuid.c (hextobin, virUUIDParse):
* src/virsh.c:
* src/xml.c (parseCpuNumber, virParseCpuSet):
Mon May 12 23:32:21 PST 2008 David L. Leskovec <dlesko@linux.vnet.ibm.com>
* qemud/qemud.c: get siginfo with signals, distribute to drivers that
register a handler
* src/driver.h: add sighandler function to state driver table
* src/internal.h: define virStateSigDispatcher functions
* src/libvirt.c: add __virStateSigDispatcher function
* src/libvirt_sym.version: add __virStateSigDispatcher
* src/lxc_driver.c: add sig handler function, cleanup vm when sigchld
received from container process
* src/qemu_driver.c: NULL for sig handler (no handler) in state driver
* src/remote_internal.c: NULL for sig handler (no handler) in state driver
* src/storage_driver.c: NULL for sig handler (no handler) in state driver
# Convert uses of isspace to c_isspace, isdigit to c_isdigit, etc.
re=$(man isspace|grep is.....,.is|sed 's/ -.*//' \
|tr -s ', \n' \||sed 's/^|//;s/|$//')
git grep -l -E "$re"|grep -Ev 'Chan|gnulib' \
|xargs perl -pi -e 's/\b('"$re"')\b/c_$1/g'
# Remove all uses of to_uchar
git grep -l to_uchar|xargs perl -pi -e 's/to_uchar\((.*?)\)/$1/g'
* src/util.h (to_uchar): Remove definition.
(TOLOWER): Remove definition.
(__virMacAddrCompare): Use c_tolower, not TOLOWER.
Globally:
Where needed, change <ctype.h> to <c-ctype.h>.
Remove unnecessary inclusion of <ctype.h>.
Ensure the global changes are never needed again:
* Makefile.maint (sc_avoid_ctype_macros): Prohibit use of ctype
macros. Recommend c-ctype.h instead.
(sc_prohibit_c_ctype_without_use): New rule.
(sc_prohibit_ctype_h): New rule. Disallow use of <ctype.h>.
* src/storage_backend_fs.c (fileTypeInfo): Add "static" and two
"const" attributes.
(FileTypeInfo): Name the previously anonymous struct,
so the declaration of fileTypeInfo looks more conventional.
* src/xend_internal.c (sound_models): Mark as static, and
as an array of "const" entries.
These were relatively new additions to the list from here:
nm src/*.o|grep ' D '
* configure.in: Fix pkg-config detection of libxml2,
add -lgcrypt to gnutls lib.
* src/Makefile.am: If compiling --without-libvirtd then
don't compile any part of the storage driver.
* configure.in, src/hash.c, src/internal.h: Detect availability
of pthread library and compile out mutex code if not available.
* src/storage_driver.c, src/util.c: Ignore some missing
headers on MinGW.
Done using this command (also includes .c.in and .h.in files):
for i in $(g ls-files|grep -E '\.[ch](\.in)?$'|grep -v gnulib); do
expand -i $i > j && mv j $i;done
* src/util.c (fread_file_lim): New function.
(__virFileReadAll): Use fread_file_lim, rather than requiring
that stat.st_size provide a usable file size.
* tests/read-non-seekable: New test, for the above.
* tests/Makefile.am (test_scripts): Add read-non-seekable.
* tests/test-lib.sh (mkfifo_or_skip_): New helper function.
* docs//* src/conf.c src/hash.c src/libvirt.c src/proxy_internal.c
src/remote_internal.c src/virsh.c src/xen_internal.c
src/xend_internal.c src/xml.c: applied patch from Atsushi SAKAI
fixing a lot of typos
Daniel
* src/hash.c src/internal.h src/virterror.c: remove dandling
domain/net/conn pointers from error data when released.
* src/lxc_driver.c: fix a NULL/0 return error mismatch
Daniel
* src/lxc_conf.c src/lxc_conf.h: cleanup patch for the conf driver
of linux countainers, reuse XPath helpers, make string fields dynamic
and remove a memory leak.
* src/lxc_driver.c: avoid some problems when the config directory is
not accessible and for regression tests
Daniel
* src/remote_internal.c (errorf): New function.
(remoteListDomains, remoteDomainPinVcpu, remoteDomainGetVcpus):
(remoteListDefinedDomains, remoteListNetworks):
(remoteListDefinedNetworks): Convert strings to be translatable,
and also to include offending and maximum values. Use errorf.
* src/lxc_conf.c src/lxc_conf.h src/lxc_driver.c src/remote_internal.c:
applied patch from Dan Berrange to change the way the lxc driver
works, migrating the support in the daemon, it also removes some
compilation issues and teh way the configuration files are named.
Daniel
* configure.in include/libvirt/virterror.h src/Makefile.am
src/driver.h src/lxc_conf.[ch] src/lxc_driver.[ch] src/virterror.c:
Applied 3 patches from Dave Leskovec for intial support of
Linux containers, configured off by default, work in progress.
* src/libvirt.c: improve virDomainCreateLinux xmlDesc description
Daniel
src/libvirt.c src/qemu.conf src/remote_internal.c src/xend_internal.c
tests/confdata/libvirtd.conf tests/confdata/libvirtd.out: patch from
Atsushi SAKAI fixing a ot more typo
Daniel
