While building under RHEL-5, I got a compile warning because
virDomainObjFormat was defined but not used. That came about
because in RHEL-5 we build with "#define PROXY", and
virDomainObjFormat is only used with !PROXY. Move the
define.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/openvz/openvz_conf.c (openvzGetVEID): Always call fclose.
Diagnose parse failure also when vzlist output is empty.
If somehow we read a -1, diagnose that (albeit as a parse failure).
Kind of minor, but it annoys me that the default auth callback
doesn't put a space between the prompt and the input, like a typical
terminal, ssh, etc. This patch changes the current prompt:
Please enter your authentication name:myuser
to
Please enter your authentication name: myuser
In bug 567931 we found that virt-top would exit occasionally
when the terminal window was resized. Tracking this down it
turned out that SIGWINCH was being delivered to the process at
exactly the point where the libvirt remote driver was calling
poll(2) waiting for a reply from libvirtd.
This caused the poll(2) call to be interrupted (returning errno
EINTR). However handling EINTR the same way as EAGAIN was not
the solution to this problem since we found previously that this
would break Ctrl-C handling (commit 47fec8eac2).
The correct solution is to mask out SIGWINCH for the duration
of the poll(2) system call. The per-thread mask is changed and
restored immediately after the call. Since we are using
pthread_sigmask, this should not affect other threads, and
since we restore the signal mask immediately afterwards it should
not affect the current thread visibly either. Other possibly
problematic signals are SIGCHLD and SIGPIPE and these are
masked too.
Note use of ignore_value: It's not fatal if we cannot mask out
SIGWINCH, and in any case pthread_sigmask never fails on Linux
as long as you supply the correct arguments.
I tested this patch and it cures the original problem with
virt-top.
Create the filesystem on the partition used by the pool
* configure.ac: check for mkfs availability
* libvirt.spec.in: add extra require on util-linux for mkfs
* src/storage/storage_backend_fs.c: run mkfs with the expected
fs type when creating a filesystem pool
We were using 'Y' to mean exabyte, when the correct abbreviation would be
'E' ('Y' is yettabyte, which is exabyte * 1024 * 1024). While it isn't
strictly backwards compatible, I highly doubt anyone was actually using
this broken behavior, so I don't see any harm in in dropping 'Y' handling.
Recently we introduced O_DSYNC flag when creating raw storage files to
avoid filling all disk cache with dirty pages. However, the patch got
lost when virStorageBackendCreateRaw was reworked using
virFileOperation. Let's use O_DSYNC again.
* src/xen/xend_internal.c (xenDaemonDomainSetAutostart): Avoid a NULL
dereference upon non-SEXPR_VALUE'd on_xend_start. This bug was
introduced by commit 37ce5600c0.
There were a few operations on the storage volume file that were still
being done as root, which will fail if the file is on a root-squashed
NFS share. The result was that attempts to create a storage volume of
type "raw" on a root-squashed NFS share would fail.
This patch uses the newly introduced "hook" function in
virFileOperation to execute all those file operations in the child
process that's run under the uid that owns the file (and, presumably,
has permission to write to the NFS share)
* src/storage/storage_backend.c: use virFileOperation() in
virStorageBackendCreateRaw, turning virStorageBackendCreateRaw()
into a new createRawFileOpHook() hook
It turns out it is also useful to be able to perform other operations
on a file created while running as a different uid (eg, write things
to that file), and possibly to do this to a file that already
exists. This patch adds an optional hook function to the renamed (for
more accuracy of purpose) virFileOperation; the hook will be called
after the file has been opened (possibly created) and gid/mode
checked/set, before closing it.
As with the other operations on the file, if the VIR_FILE_OP_AS_UID
flag is set, this hook function will be called in the context of a
child process forked from the process that called virFileOperation.
The implication here is that, while all data in memory is available to
this hook function, any modification to that data will not be seen by
the caller - the only indication in memory of what happened in the
hook will be the return value (which the hook should set to 0 on
success, or one of the standard errno values on failure).
Another piece of making the function more flexible was to add an
"openflags" argument. This arg should contain exactly the flags to be
passed to open(2), eg O_RDWR | O_EXCL, etc.
In the process of adding the hook to virFileOperation, I also realized
that the bits to fix up file owner/group/mode settings after creation
were being done in the parent process, which could fail, so I moved
them to the child process where they should be.
* src/util/util.[ch]: rename and rework virFileCreate-->virFileOperation,
and redo flags in virDirCreate
* storage/storage_backend.c, storage/storage_backend_fs.c: update the
calls to virFileOperation/virDirCreate to reflect changes in the API,
but don't yet take advantage of the hook.
Fix multiple veth problem.
NETIF setting was overwritten after first CT because any CT could not be
found by name.
* src/openvz/openvz_conf.c src/openvz/openvz_conf.h: add the
openvzGetVEID lookup function
* src/openvz/openvz_driver.c: use it in openvzDomainSetNetwork()
If the hostname as returned by "gethostname" resolves
to "localhost" (as it does with the broken Fedora-12
installer), then live migration will fail because the
source will try to migrate to itself. Detect this
situation up-front and abort the live migration before
we do any real work.
* src/util/util.h src/util/util.c: add a new virGetHostnameLocalhost
with an optional localhost check, and rewire virGetHostname() to use
it
* src/libvirt_private.syms: expose the new function
* src/qemu/qemu_driver.c: use it in qemudDomainMigratePrepare2()
* src/xen/xend_internal.c (xenDaemonDomainSetAutostart): Rewrite to
avoid dereferencing the result of sexpr_lookup. While in this
particular case, it was guaranteed never to be NULL, due to the
preceding "if sexpr_node(...)" guard, it's cleaner to skip the
sexpr_node call altogether, and also saves a lookup.
This patch sets or unsets the IFF_VNET_HDR flag depending on what device
is used in the VM. The manipulation of the flag is done in the open
function and is only fatal if the IFF_VNET_HDR flag could not be cleared
although it has to be (or if an ioctl generally fails). In that case the
macvtap tap is closed again and the macvtap interface torn.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: pass qemuCmdFlags to
qemudPhysIfaceConnect()
* src/util/macvtap.c src/util/macvtap.h: add vnet_hdr boolean to
openMacvtapTap(), and private function configMacvtapTap()
* src/qemu/qemu_driver.c: add extra qemuCmdFlags when calling
qemudPhysIfaceConnect()
For __virExec() this is a semantic NOP except for when fork()
fails. __virExec() would previously forget to restore the signal mask
in this case; virFork() corrects this behavior.
virFileCreate() and virDirCreate() gain the code to reset the logging
and properly deal with the signal handling race condition.
This also removes a log message that had a typo ("cannot fork o create
file '%s'") - this error is now logged in a more generic manner in
virFork() (more generic, but really just as informative, since the
fact that it's forking to create a file is immaterial to the fact that
it simply can't fork)
* src/util/util.c: use the generic virFork() in the 3 functions
virFork() contains bookkeeping that must be done any time a process
forks. Currently this includes:
1) Call virLogLock() prior to fork() and virLogUnlock() just after,
to avoid a deadlock if some other thread happens to hold that lock
during the fork.
2) Reset the logging hooks and send all child process log messages to
stderr.
3) Block all signals prior to fork(), then either a) reset the signal
mask for the parent process, or b) clear the signal mask for the
child process.
Note that the signal mask handling in __virExec erroneously fails to
restore the signal mask when fork() fails. virFork() fixes this
problem.
Other than this, it attempts to behave as closely to fork() as
possible (including preserving errno for the caller), with a couple
exceptions:
1) The return value is 0 (success) or -1 (failure), while the pid is
returned via the pid_t* argument. Like fork(), if pid < 0 there is
no child process, otherwise both the child and the parent will
return to the caller, and both should look at the return value,
which will indicate if some of the extra processing outlined above
encountered an error.
2) If virFork() returns with pid < 0 or with a return value < 0
indicating an error condition, the error has already been
reported. You can log an additional message if you like, but it
isn't necessary, and may be awkwardly extraneous.
Note that virFork()'s child process will *never* call _exit() - if a
child process is created, it will return to the caller.
* util.c util.h: add virFork() function, based on what is currently
done in __virExec().
Support virtio-serial controller and virtio channel in QEMU backend.
Will output
the following for virtio-serial controller:
-device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4,max_ports=16,vectors=4
and the following for a virtio channel:
-chardev pty,id=channel0 \
-device
virtserialport,bus=virtio-serial0.0,chardev=channel0,name=org.linux-kvm.port.0
* src/qemu/qemu_conf.c: Add argument output for virtio
* tests/qemuxml2argvtest.c
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args: Add test for
QEMU command line generation
Add support for virtio-serial by defining a new 'virtio' channel target type
and a virtio-serial controller. Allows the following to be specified in a
domain:
<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
<channel type='pty'>
<target type='virtio' name='org.linux-kvm.port.0'/>
<address type='virtio-serial' controller='0' bus='0'/>
</channel>
* docs/schemas/domain.rng: Add virtio-serial controller and virtio
channel type.
* src/conf/domain_conf.[ch]: Domain parsing/serialization for
virtio-serial controller and virtio channel.
* tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml
parsing test
* src/libvirt_private.syms src/qemu/qemu_conf.c:
virDomainDefAddDiskControllers() renamed to
virDomainDefAddImplicitControllers()
Remove virDomainDevicePCIAddressEqual and virDomainDeviceDriveAddressEqual,
which are defined but not used anywhere.
* src/conf/domain_conf.[ch] src/libvirt_private.syms: Remove
virDomainDevicePCIAddressEqual and virDomainDeviceDriveAddressEqual.
Currently we just error with ex. 'virbr0: No such device'.
Since we are using public API calls here, we need to ensure that any
raised error is properly saved and restored, since API entry points
always reset messages.
virGetLastError returns NULL if no error has been set, not on
allocation error like virSetError assumed. Use virLastErrorObject
instead. This fixes virSetError when no error is currently stored.
Rework and simplification of teardown of the macvtap device.
Basically all devices with the same MAC address and link device are kept
alive and not attempted to be torn down. If a macvtap device linked to a
physical interface with a certain MAC address 'M' is to be created it
will automatically fail if the interface is 'up'ed and another macvtap
with the same properties (MAC addr 'M', link dev) happens to be 'up'.
This will prevent the VM from starting or the device from being attached
to a running VM. Stale interfaces are assumed to be there for some
reason and not stem from libvirt.
In the VM shutdown path, it's assuming that an interface name is always
available so that if the device type is DIRECT it can be torn down
using its name.
* src/util/macvtap.h src/libvirt_macvtap.syms: change of deleting routine
* src/util/macvtap.c: cleanups and change of deleting routine
* src/qemu/qemu_driver.c: change cleanup on shutdown
* src/qemu/qemu_conf.c: don't delete Macvtap in qemudPhysIfaceConnect()
The QEMU JSON monitor changed balloon commands to return/accept
bytes instead of kilobytes. Update libvirt to cope with this
* src/qemu/qemu_monitor_json.c: Expect/use bytes for ballooning
* src/uml/uml_driver.c (umlMonitorCommand): This function would
sometimes return -1, yet fail to free the "reply" it had allocated.
Hence, no caller would know to free the corresponding argument.
When returning -1, be sure to free all allocated resources.
* src/storage/storage_backend_mpath.c (virStorageBackendIsMultipath):
The result of dm_get_next_target was never used (and isn't needed),
so don't store it.
Similar to the Set*Mem commands, this implementation was bogus and
misleading. Make it clear this is a hotplug only operation, and that the
hotplug piece isn't even implemented.
Also drop the overkill maxvcpus validation: we don't perform this check
at XML define time so clearly no one is missing it, and there is
always the risk that our info will be out of date, possibly preventing
legitimate CPU values.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
SetMem and SetMaxMem are hotplug only APIs, any persistent config
changes are supposed to go via XML definition. The original implementation
of these calls were incorrect and had the nasty side effect of making
a psuedo persistent change that would be lost after libvirtd restart
(I didn't know any better).
Fix these APIs to rightly reject non running domains.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The plain QEMU tree does not include 'thread_id' in the JSON
output. Thus we need to treat it as non-fatal if missing.
* src/qemu/qemu_monitor_json.c: Treat missing thread_id as non-fatal
A typo in the check for the primary IDE controller could cause
a crash on restore depending on the exact guest config.
* src/qemu/qemu_conf.c: Fix s/video/controller/ typo & slot
number typo
Current error reporting for JSON mode returns the full JSON
command string and full JSON error string. This is not very
user friendly, so this change makes the error report only
contain the basic command name, and friendly error message
description string. The full JSON data is logged instead.
* src/qemu/qemu_monitor_json.c: Always return the 'desc' field from
the JSON error message to users.
When in JSON mode, QEMU requires that 'qmp_capabilities' is run as
the first command in the monitor. This is a no-op when run in the
text mode monitor
* src/qemu/qemu_driver.c: Run capabilities negotiation when
connecting to the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
support for the 'qmp_capabilities' command, no-op in text mode.
This part adds support for qemu making a macvtap tap device available
via file descriptor passed to qemu command line. This also attempts to
tear down the macvtap device when a VM terminates. This includes support
for attachment and detachment to/from running VM.
* src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the
QEmu driver
This part adds the helper code to setup and tear down macvtap devices
using direct communication with the device driver via netlink sockets.
The rather short messages received from the netlink layer are now
written into a dynamically allocated buffer
* src/util/macvtap.h src/util/macvtap.c: provides the new module
* po/POTFILES.in: the module contains translated strings
This part adds support to domain_conf.{c|h} for parsing the new
interface XML of type 'direct'. The parsed mode is now stored as
an int.
* src/conf/domain_conf.c src/conf/domain_conf.h: extend parsing code
* src/util/macvtap.h: empty header to not break compilation
This patch adds build support for libvirt checking for certain contents
of /usr/include/linux/if_link.h to see whether macvtap support is
compilable on that system. One can disable macvtap support in libvirt
via --without-macvtap passed to configure.
* configure.ac src/Makefile.am: new build support
* src/libvirt_macvtap.syms: list of exported symbols
* src/util/macvtap.c: empty module to not break compilation
The virRaiseError macro inside of virSecurityReportError expands to
virRaiseErrorFull and includes the __FILE__, __FUNCTION__ and __LINE__
information. But this three values are always the same for every call
to virSecurityReportError and do not reflect the actual error context.
Converting virSecurityReportError into a macro results in getting the
correct __FILE__, __FUNCTION__ and __LINE__ information.
Current PCI addresses are allocated at time of VM startup.
To make them truely persistent, it is neccessary to do this
at time of virDomainDefine/virDomainCreate. The code in
qemuStartVMDaemon still remains in order to cope with upgrades
from older libvirt releases
* src/qemu/qemu_driver.c: Rename existing qemuAssignPCIAddresses
to qemuDetectPCIAddresses. Add new qemuAssignPCIAddresses which
does auto-allocation upfront. Call qemuAssignPCIAddresses from
qemuDomainDefine and qemuDomainCreate to assign PCI addresses that
can then be persisted. Don't clear PCI addresses at shutdown if
they are intended to be persistent
The old text mode monitor prompts for a password when disks are
encrypted. This interactive approach doesn't work for JSON mode
monitor. Thus there is a new 'block_passwd' command that can be
used.
* src/qemu/qemu_driver.c: Split out code for looking up a disk
secret from findVolumeQcowPassphrase, into a new method
getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also
set the disk encryption password via the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
support for the 'block_passwd' monitor command.
Since c26cb9234f, the dname
parameter has been ignored by these two functions. Use it.
* src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Honor dname
parameter once again.
(qemudDomainMigratePrepare2): Likewise.
All other libvirt functions use array first and then number of elements
in that array. Let's make cpuDecode follow this rule.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With QEMU >= 0.12 the host and guest side of disks no longer have
the same naming convention. Specifically the host side will now
get a 'drive-' prefix added to its name. The 'info blockstats'
monitor command returns the host side name, so it is neccessary
to strip this off when looking up stats since libvirt stores the
guest side name !
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix
string to a defined constant
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip
off 'drive-' prefix (if found) when looking up disk stats
Currently the timeout for reading startup output is 3 seconds. If the
host is under any sort of load, we can easily trigger this. Lets bump
it to 30 seconds.
Since the polling loop checks to see if the process has died, we shouldn't
erroneously hit this timeout if qemu bombs (only if it is stuck in some
infinite loop).
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr
args as mandatory non-null so the compiler can warn of mistakes
* src/conf/domain_event.h: All virConnectPtr args must be non-null
* src/qemu/qemu_conf.h: qemudBuildCommandLine and
qemudNetworkIfaceConnect() must be given non-null connection
* tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to
qemudBuildCommandLine()
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in secret_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in interface_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in cpu_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in storage_conf.{h,c} and storage_encryption_conf.{h,c}
and update all callers to match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in network_conf.{h,c} and update all callers to
match
All callers now pass a NULL virConnectPtr into the USB/PCi device
iterator functions. Therefore the virConnectPtr arg can now be
removed from these functions
* src/util/hostusb.h, src/util/hostusb.c: Remove virConnectPtr
from usbDeviceFileIterate
* src/util/pci.c, src/util/pci.h: Remove virConnectPtr arg from
pciDeviceFileIterate
* src/qemu/qemu_security_dac.c, src/security/security_selinux.c: Update
to drop redundant virConnectPtr arg
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
Use 'unsigned long long' for QEMU flags
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in security_driver.{h,c} and update all callers to
match
The security driver was mistakenly initialized before the QEMU
config file was loaded. This prevents it being turned off again.
The capabilities XML was also getting the wrong security driver
name, due to the stacked driver arrangement.
* src/qemu/qemu_driver.c: Fix initialization order and capabilities
model name
* src/util/util.h (virAsprintf): Remove ATTRIBUTE_RETURN_CHECK, since
it is perfectly fine to ignore the return value, now that the pointer
is guaranteed to be set to NULL upon failure.
* src/util/storage_file.c (absolutePathFromBaseFile): Remove now-
unnecessary use of ignore_value.
* src/util/storage_file.c (absolutePathFromBaseFile): While this use
of virAsprintf is slightly cleaner than using stpncpy(stpcpy(...,
it does impose an artificial limitation on the length of the base_file
name. Rather than asserting that it does not exceed INT_MAX, return
NULL when it does.
When creating preallocated large raw files opening them with O_DSYNC
prevents long delays in reading because cache pages can be immediately
reused without writing them on a disk first.
virDomain{Attach,Detach}Device is now only permitted on active
domains. Explicitly state this restriction in the API
documentation.
V2: Only change doc, dropping the hunk that forced the restriction
in libvirt frontend.
When configured with --enable-gcc-warnings, it didn't even compile.
* src/util/storage_file.c: Include <assert.h>.
(absolutePathFromBaseFile): Assert that converting size_t to int is valid.
Reverse length/string args to match "%.*s".
Explicitly ignore the return value of virAsprintf.
* src/util/storage_file.c: Include "dirname.h".
(absolutePathFromBaseFile): Rewrite not to leak, and to require
fewer allocations.
* bootstrap (modules): Add dirname-lgpl.
* .gnulib: Update submodule to the latest.
When restoring from a saved guest image, the XML would already
contain the PCI slot ID of the IDE controller & video card.
The attempt to explicitly reserve this upfront would thus fail
everytime.
* src/qemu/qemu_conf.c: Reserve IDE controller / video card
slot at time of need, rather than upfront
Similar fix as previous one but for fork() usage when creating
a file or directory
* src/util/util.c: virLogLock() and virLogUnlock() around fork()
in virFileCreate() and virDirCreateSimple()
Ad pointed out by Dan Berrange:
So if some thread in libvirtd is currently executing a logging call,
while another thread calls virExec(), that other thread no longer
exists in the child, but its lock is never released. So when the
child then does virLogReset() it deadlocks.
The only way I see to address this, is for the parent process to call
virLogLock(), immediately before fork(), and then virLogUnlock()
afterwards in both parent & child. This will ensure that no other
thread
can be holding the lock across fork().
* src/util/logging.[ch] src/libvirt_private.syms: export virLogLock() and
virLogUnlock()
* src/util/util.c: lock just before forking and unlock just after - in
both parent and child.
The original udev node device backend neglected to lock the driverState
struct containing the device list when adding and removing devices
* src/node_device/node_device_udev.c: add necessary locks in
udevRemoveOneDevice() and udevAddOneDevice()
* src/xen/xs_internal.c (xenStoreDomainIntroduced): Don't use -1
as an allocation size upon xenStoreNumOfDomains failure.
(xenStoreDomainReleased): Likewise.
If the primary security driver (SELinux/AppArmour) was disabled
then the secondary QEMU DAC security driver was also disabled.
This is mistaken, because the latter must be active at all times
* src/qemu/qemu_driver.c: Ensure DAC driver is always active
* src/xen/xen_hypervisor.c: Remove all "domain == NULL" tests.
* src/xen/xen_hypervisor.h: Instead, use ATTRIBUTE_NONNULL to
mark each "domain" parameter as "known always to be non-NULL".
When attaching a USB host device based on vendor/product, libvirt
will resolve the vendor/product into a device/bus pair. This means
that when printing XML we should allow device/bus info to be printed
at any time if present
* src/conf/domain_conf.c, docs/schemas/domain.rng: Allow USB device
bus info alongside vendor/product
To allow devices to be hot(un-)plugged it is neccessary to ensure
they all have a unique device aliases. This fixes the hotplug
methods to assign device aliases before invoking the monitor
commands which need them
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Expose methods
for assigning device aliases for disks, host devices and
controllers
* src/qemu/qemu_driver.c: Assign device aliases when hotplugging
all types of device
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address-device.args:
Update for changed hostdev naming scheme
This patch re-arranges the QEMU device alias assignment code to
make it easier to call into the same codeblock when performing
device hotplug. The new code has the ability to skip over already
assigned names to facilitate hotplug
* src/qemu/qemu_driver.c: Call qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_conf.h: Export qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_driver.c: Merge the legacy disk/network alias
assignment code into the main methods
The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
Use a single network alias naming scheme regardless of NIC type
or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
for new simpler naming scheme
The QEMU 0.12.x tree has the -netdev command line argument, but not
corresponding monitor command. We can't enable the former, without
the latter since it will break hotplug/unplug.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage
until 0.13 at earliest
* tests/qemuxml2argvtest.c: Add test for -netdev syntax
* tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test
data files for -netdev syntax
PCI disk, disk controllers, net devices and host devices need to
have PCI addresses assigned before they are hot-plugged
* src/qemu/qemu_conf.c: Add APIs for ensuring a device has an
address and releasing unused addresses
* src/qemu/qemu_driver.c: Ensure all devices have addresses
when hotplugging.
The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.
It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
list of existing PCI addresses, and allocating new addresses.
Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
qemuStartVMDaemon() method, as a prelude to moving it into the
'define' method. Update list of allocated addresses when connecting
to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
tests/qemuxml2xmltest.c: Remove USB product test since all
passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
unused data files
The virDomainDeviceInfoIterate() function will provide a
convenient way to iterate over all devices in a domain.
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDeviceInfoIterate()
function.
Since QEMU startup uses the new -device argument, the hotplug
code needs todo the same. This converts disk, network and
host device hotplug to use the device_add command
* src/qemu/qemu_driver.c: Use new device_add monitor APIs
whereever possible
The way QEMU is started has been changed to use '-device' and
the new style '-drive' syntax. This needs to be mirrored in
the hotplug code, requiring addition of two new APIs.
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Define APIs
qemuMonitorAddDevice() and qemuMonitorAddDrive()
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Implement the new monitor APIs
To allow for better code reuse from hotplug methods, the code for
generating PCI/USB hostdev arg values is split out into separate
methods
* qemu/qemu_conf.h, qemu/qemu_conf.c: Introduce new APis for
qemuBuildPCIHostdevPCIDevStr, qemuBuildUSBHostdevUsbDevStr
and qemuBuildUSBHostdevDevStr
All the helper functions for building command line arguments
now return a 'char *', instead of acepting a 'char **' or
virBufferPtr argument
* qemu/qemu_conf.c: Standardize syntax for building args
* qemu/qemu_conf.h: Export all functions for building args
* qemu/qemu_driver.c: Update for changed syntax for building
NIC/hostnet args
udevGetUintProperty was called with base set to 0 for busnum and devnum.
With base 0 strtoul parses the number as octal if it start with a 0. But
busnum and devnum are decimal and udev returns them padded with leading
zeros. So strtoul parses them as octal. This works for certain decimal
values like 001-007, but fails for values like 008.
Change udevProcessUSBDevice to use base 10 for busnum and devnum.
* src/util/util.c (virGetUserID, virGetGroupID): In the unlikely event
that sysconf(_SC_GETPW_R_SIZE_MAX) fails, don't use -1 as the size in
the subsequent allocation.
Similar to the race fixed by
be34c3c7ef, make sure
to wait around for KVM to release the resources from
a hot-detached PCI device before attempting to
rebind that device to the host driver.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The QEMU driver contained code to generate a -device string for piix4-ide, but
wasn't using it. This change removes this string generation. It also adds a
comment explaining why IDE and FDC controllers don't generate -device strings.
The change also generates an error if a sata controller is specified for a QEMU
domain, as this isn't supported.
* src/qemu/qemu_conf.c: Remove VIR_DOMAIN_CONTROLLER_TYPE_IDE handler in
qemuBuildControllerDevStr(). Ignore IDE and FDC controllers. Error if
SATA controller is discovered. Add comments.
On RHEL-5 the qemu-kvm binary is located in /usr/libexec.
To reduce confusion for people trying to run upstream libvirt
on RHEL-5 machines, make the qemu driver look in /usr/libexec
for the qemu-kvm binary.
To make this work, I modified virFindFileInPath to handle an
absolute path correctly. I also ran into an issue where
NULL was sometimes being passed for the file parameter
to virFindFileInPath; it didn't crash prior to this patch
since it was building paths like /usr/bin/(null). This
is non-standard behavior, though, so I added a NULL
check at the beginning.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/util/util.c (virGetUserEnt): In the unlikely event that
sysconf(_SC_GETPW_R_SIZE_MAX) fails, don't use -1 as the size in
the subsequent allocation.
xen-unstable c/s 20762 bumped XEN_SYSCTL_INTERFACE_VERSION to 7. The
interface change does not affect libvirt, other than xenHypervisorInit()
failing since version 7 is not tried.
The attached patch accommodates the upcoming Xen 4.0 release by checking
for XEN_SYSCTL_INTERFACE_VERSION 7. If found, it sets
XEN_DOMCTL_INTERFACE_VERSION to 6, which is also new to Xen 4.0.
it causes a NULL-dereference on some systems like Solaris 10.
* src/node_device/node_device_linux_sysfs.c. Include <stdlib.h>.
(get_sriov_function): Use canonicalize_file_name, not realpath.
* bootstrap (modules): Add canonicalize-lgpl.
This fixes a segfault when the event handler is called after shutdown
when the global driver state is NULL again.
Also fix a locking issue in an error path.
virFileMakePath is a recursive function that was creates a buffer
PATH_MAX bytes long for each recursion (one recursion for each element
in the path). This changes it to have no buffers on the stack, and to
allocate just one buffer total, no matter how many elements are in the
path. Because the modified algorithm requires a char* to be passed in
rather than const char *, it is now 2 functions - a toplevel API
function that remains identical in function, and a 2nd helper function
called for the recursions, which 1) doesn't allocate anything, and 2)
takes a char* arg, so it can modify the contents.
* src/util/util.c: rewrite virFileMakePath
This reverts commit cdc42d0a48.
As DanB pointed out, this patch is actually wrong. The real
bug that was causing me to see this problem is a bug
introduced in a RHEL-5 libvirt snapshot, and I'm going to
fix the real bug there.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
If you shutdown libvirtd while a domain with PCI
devices is running, then try to restart libvirtd,
libvirtd will crash.
This happens because qemuUpdateActivePciHostdevs() is calling
pciDeviceListSteal() with a dev of 0x0 (NULL), and then trying
to dereference it. This patch fixes it up so that
qemuUpdateActivePciHostdevs() steals the devices after first
Get()'ting them, avoiding the crash.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/qemu/qemu_monitor_text.c (qemuMonitorTextAttachDrive): Most other
failures in this function would "goto cleanup", but one mistakenly
returned directly, skipping the cleanup and resulting in a leak.
In addition, iterating the "try_command" loop would clobber, and
thus leak, the "cmd" allocated on the first iteration,
so be careful to free it in addition to "reply" beforehand.
The KVM build of QEMU includs the thread ID of each vCPU in the
'query-cpus' output. This is required for pinning guests to
particular host CPUs
* src/qemu/qemu_monitor_json.c: Extract 'thread_id' from CPU info
* src/util/json.c, src/util/json.h: Declare returned strings
to be const
* src/qemu/qemu_monitor.c: Wire up JSON mode for qemuMonitorGetPtyPaths
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Fix
const correctness. Add missing error message in the function
qemuMonitorJSONGetAllPCIAddresses. Add implementation of the
qemuMonitorGetPtyPaths function calling 'query-chardev'.
Two files were using functions from <sys/stat.h> but not including
in. Most of the time they got this automatically via another header,
but certain build flag combinations can reveal the problem
* src/lxc/lxc_container.c, src/node_device/node_device_linux_sysfs.c:
Add <sys/stat.h>
The <console> tag is supposed to result in addition of a single
<serial> device for HVM guests. The 'targetType' attribute was
missing though causing the compatibility code to add a second
<console> device
* src/conf/domain_conf.c: Set targetType for serial device
When libvirtd shuts down, it places a <state/> tag in the XML
state file it writes out for guests with PCI passthrough
devices. For devices that are attached at bootup time, the
state tag is empty. However, at libvirtd startup time, it
ignores anything with a <state/> tag in the XML, effectively
hiding the guest.
This patch remove the check for VIR_DOMAIN_XML_INTERNAL_STATUS
when parsing the XML.
* src/conf/domain_conf.c: remove VIR_DOMAIN_XML_INTERNAL_STATUS
flag check in virDomainHostdevSubsysPciDefParseXML()
Certain hypervisors (like qemu/kvm) map the PCI bar(s) on
the host when doing device passthrough. This can lead to a race
condition where the hypervisor is still cleaning up the device while
libvirt is trying to re-attach it to the host device driver. To avoid
this situation, we look through /proc/iomem, and if the hypervisor is
still holding onto the bar (denoted by the string in the matcher variable),
then we can wait around a bit for that to clear up.
v2: Thanks to review by DV, make sure we wait the full timeout per-device
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The patches to add ACS checking to PCI device passthrough
introduced a bug. With the current code, if you try to
passthrough a device on the root bus (i.e. bus 0), then
it denies the passthrough. This is because the code in
pciDeviceIsBehindSwitchLackingACS() to check for a parent
device doesn't take into account the possibility of the
root bus. If we are on the root bus, it means we
legitimately can't find a parent, and it also means that
we don't have to worry about whether ACS is enabled.
Therefore return 0 (indicating we don't lack ACS) from
pciDeviceIsBehindSwitchLackingACS().
Signed-off-by: Chris Lalancette <clalance@redhat.com>
