The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 1347a19f75
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: b10bc8f7ab
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
We already do check that if there's <memory mode='restrictive'/>
then all <memnode/> have to be of 'restrictive' mode too. But
what we are missing the reverse: if there is <memnode/> with
'restrictive' mode, then the <memory/> has to be of the same mode
too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2208946
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The parser makes the values mandatory and also the qemu code implements
actions for those values. The formatter skips them though. Since
format+parse is used to copy the XML at startup a definition with those
values can't be started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2203709
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use DO_TEST_CAPS_LATEST to run with the latest capapbilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all of the 'audio-default-*' cases to use capabilities from
qemu-4.2 instead of the fake caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Symlinks are hard to maintain and especially un-cool when attempting to
test against real capapbilities.
Replace symlinks by real files first so that we can switch to real caps
and see the difference.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is pretty trivial, just append "mte=on/off" to -machine
arguments.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The MTE feature (introduced in QEMU commit of v5.1.0-rc1~8^2~11)
is detectable via 'qom-list-properties' for 'virt' machine type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there's not a single caller that would
call qemuDomainGetMemLockLimitBytes() with @forceVFIO set. All
callers pass false.
Drop the unneeded argument from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
One of our examples in the 'formatbackup.rst' page shows following
config:
<disk name='vda' backup='yes'/>
The schema didn't allow it though. Fix the schema as the internals were
supposed to support it (except for the bug fixed in previous patches).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the 'disk->store' property is already allocated which happens e.g.
when the disk is described by the backup XML but the optional filename
is not filled in 'virDomainBackupDefAssignStore' would not fill in the
default location.
Fix the logic to do it also if a 'virStorageSource' categorizes as
empty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With musl-1.2.3: I get the following macros defined (from
$builddir/meson-config.h):
#define WITH_LSTAT 1
#define WITH_LSTAT64 1
#define WITH_LSTAT_DECL 1
#define WITH_STAT 1
#define WITH_STAT64 1
#define WITH_STAT_DECL 1
#define WITH___LXSTAT 1
#define WITH___LXSTAT64 1
#define WITH___XSTAT 1
#define WITH___XSTAT64 1
which in turn means the virmockstathelpers.c ends up defining:
MOCK_STAT64
MOCK_LSTAT64
But with musl-1.2.4 everything changes and the set of defined
macros gets simplified to:
#define WITH_LSTAT 1
#define WITH_LSTAT_DECL 1
#define WITH_STAT 1
#define WITH_STAT_DECL 1
#define WITH___LXSTAT 1
#define WITH___XSTAT 1
which results in no MOCK_* macros defined in
virmockstathelpers.c, i.e. no stat() mocking, nada. The reason
for this simplification are these musl commits [1][2] which
removed all 64 bit aliases. And that's not what our logic for
deciding what flavor of stat() to mock counted with.
Nevertheless, we do build with Alpine Linux in our CI, so how
come we don't see this problem there? Well, simply because Alpine
Linux maintainers decided to revert the commits [3][4]. But on
distributions that use vanilla musl, this problem can be seen
easily.
1: https://git.musl-libc.org/cgit/musl/commit/?id=246f1c811448f37a44b41cd8df8d0ef9736d95f4
2: https://git.musl-libc.org/cgit/musl/commit/?id=25e6fee27f4a293728dd15b659170e7b9c7db9bc
3: https://git.alpinelinux.org/aports/commit/main/musl?id=6a5563fbb45b3d9d60678d7bbf60dbb312a2d481
4: https://git.alpinelinux.org/aports/commit/main/musl?id=a089bd852f8983623fa85e0f5755a3e25bf53c72
Resolves: https://bugs.gentoo.org/906167
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Neither of tests that use virfirewallmock.c
(networkxml2firewalltest, nwfilterebiptablestest,
nwfilterxml2firewalltest, virfirewalltest) really call
virFindFileInPath(). But at least networkxml2firewalltest calls
virFirewallDIsRegistered(), under the hood. Now, the actual
implementation connects to dbus and something, which is
definitely not what we want in our test suite.
Therefore, drop virFindFileInPath() implementation and provide
implementation for virFirewallDIsRegistered() which just returns
-2 to signal that firewalld is not registered.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Allow users controlling the multi-channel mode by adding a
'multichannel' property parsed for USB audio devices and wire up the
support in the qemu driver.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop the unnecessary disk definition and use x86_64 emulator.
For 'qemuxml2argvtest' replace the fake-caps invocation by a 4.2.0
version-locked invocation and add a '_CAPS_LATEST' invocation.
For 'qemuxml2xmltest' convert to use '_CAPS_LATEST' only.
There are no sound-device relevant changes in the output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case is a subset of what the 'sound-device' case tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the support for the persisted poll parameters and remove
restrictions on saving config when modifying them during runtime.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we allow configuring the 'poll-max-ns', 'poll-grow', and
'poll-shrink' parameters of qemu iothreads only during runtime and they
are not persisted. Add XML machinery to persist them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When preparing a SCSI <hostdev/> with passthrough of a host SCSI
adapter (i.e. no protocol), a virStorageSource structure is
initialized and stored inside virDomainHostdevDef. But the source
structure is filled in many places, with almost the same code.
Firstly, qemuProcessPrepareHostHostdev() and
qemuConnectDomainXMLToNativePrepareHostHostdev() are the same.
Secondly, qemuDomainPrepareHostdev() allocates the src structure,
only to let qemuProcessPrepareHostHostdev() fill src->path later.
Well, src->path can be filled at the same place where the src
structure is allocated (qemuDomainPrepareHostdev()) which renders
the other two functions needless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The qemuxml2argvtest does a bit of 'fixups' to parsed
virDomainDef just before generating the cmd line. For instance,
it sets PCI backend for hostdevs (to VFIO). The reason for this
is that we want to make the test host independent and thus
letting the code chose backend at runtime might render different
results on different machines. But this is not necessary, as
virpcimock (that the test uses) already creates a fake, but
stable environment (where /dev/vfio/vfio and IOMMU groups exist),
thus qemuHostdevHostSupportsPassthroughVFIO() returns true,
regardless of the actual host support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Just like we check the resulting domain XML after ATTACH and
DETACH, we should do the same after UPDATE action. This is as
simple as calling testQemuHotplugCheckResult() and providing
missing XMLs. For those test cases where no change is done, we
can just make the expected XML a symlink to the input XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This brings us one step closer to the caller of
qemuDomainAttachDeviceLive()
(qemuDomainAttachDeviceLiveAndConfig()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This is a leftover from v2.0.0-rc1~300. In v1.2.12-rc1~43 we've
introduced a code that explicitly sets vm->def->id to -1 to force
generation of inactive XML. But this was removed in the later
commit, which forgot to remove the restoration of the original
dom ID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's a comment in testQemuHotplug() trying to explain why we
need to unlock the monitor object. Well, while it might have been
correct when being introduced, it's no longer factually correct
as just any function (attach/detach/update) might talk to the
monitor and it expects the monitor to be unlocked (as it calls
qemuDomainObjEnterMonitor() + qemuDomainObjExitMonitor()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's no reason for qemuhotplugtest to reimplement which device
update function to call (testQemuHotplugUpdate()) when
qemuDomainUpdateDeviceLive() already does that. Thus, drop
testQemuHotplugUpdate() and call qemuDomainUpdateDeviceLive()
directly.
BTW: this also shows why reimplementing
qemuDomainUpdateDeviceLive() is bad idea: The
"disk-cdrom-nochange" test is succeeding only because
testQemuHotplugUpdate() supports graphics and returns an
(expected) error for every other devtype.
NB, there's still missing check that the resulting XML is the
expected one (just like we do for attach and detach), but that's
pre-existing and will be fixed later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's no reason for qemuhotplugtest to reimplement which device
attach function to call (testQemuHotplugAttach()) when
qemuDomainAttachDeviceLive() already does that. Thus, drop
testQemuHotplugAttach() and call qemuDomainAttachDeviceLive()
directly.
There's one small catch though, qemuDomainAttachDeviceLive() now
calls one monitor command more (to list all aliases). We don't
care really, because we're not testing that. Therefore, just
provide a dummy reply.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The testQemuHotplugDetach() already does call
qemuDomainDetachDeviceLive() but only for some device types. For
the rest it reports an error (but only if running test
verbosely). This makes no sense. Just call
qemuDomainDetachDeviceLive() directly and drop
testQemuHotplugDetach().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The disk private data contain information about the tray and
removability of the disk. Until recently we didn't support hotplug of
removable disks thus it wasn't a problem but now when you can hotplug a
CDROM you would not be able to open its tray.
Fix it by updating the hotplugged disk the same way we do at startup.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160435
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This makes it also work during attach. Also add a test for attaching a
watchdog with incompatible action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2187278
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can launch qemu with it, but it will not work since it's not even
probed by the kernel at the mapped address with different machine types
since they are expected to be connected to ISA and not even its newer
LPC counterpart found on q35. And it does not exist on non-x86
architectures.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting QEMU, or when hotplugging a PCI device QEMU might
lock some memory. How much? Well, that's an undecidable problem.
But despite that, we try to guess. And it more or less works,
until there's a counter example. This time, it's a guest with
both <hostdev/> and an NVMe <disk/>. I've started a simple guest
with 4GiB of memory:
# virsh dominfo fedora
Max memory: 4194304 KiB
Used memory: 4194304 KiB
And here are the amounts of memory that QEMU tried to lock,
obtained via:
grep VmLck /proc/$(pgrep qemu-kvm)/status
1) with just one <hostdev/>
VmLck: 4194308 kB
2) with just one NVMe <disk/>
VmLck: 4328544 kB
3) with one <hostdev/> and one NVMe <disk/>
VmLck: 8522852 kB
Now, what's surprising is case 2) where the locked memory exceeds
the VM memory. It almost resembles VDPA. Therefore, treat is as
such.
Unfortunately, I don't have a box with two or more spare NVMe-s
so I can't tell for sure. But setting limit too tight means QEMU
refuses to start.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2014030
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's quite difficult, if not impossible, to create a working RISC-V VMs
using the current default machine type of 'spike_v1.10'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's quite difficult, if not impossible, to create a usable ARM VMs
using the current default machine type of 'integratorcp'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
That's already the case in practice, but it's a better
experience for the user if we reject this configuration
outright instead of silently ignoring part of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit fc216db4fb introduced a mocked test with binary test data
which fails on big endian machines.
Therefore build the viracpitest test only on little endian machines.
Fixes: fc216db4fb
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a small kludge in the parser to avoid unnecessarily
blocking incoming migration from a range of recent libvirt
releases.
https://bugzilla.redhat.com/show_bug.cgi?id=2184966
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The canonical order for <os> child elements is <firmware>
then <loader>.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all tests were converted to use real capabilities we don't need
it any more. Remove it so that no new tests are added with it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace them with full files so that potential fallout from conversion
to real capabilities is more obvious and the test is simpler to add.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patch will be modifying all of them to use real capabilities.
This way it will be more obvious what will change.
Keeping the symlinks around is tedious for humans to do. Waste some
storage instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions at this point support both 'qemu-xhci' and
'nec-xhci' controllers. To allow using real capabilities restructure the
tests so that we test both controllers explicitly as well as the
selection of the default model.
Also add a xml2xml test invocation of the unified test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fake-caps version was kept as an example that the code behaves the
same with real capabilities. Now it's not needed any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With all supported qemu versions we'll pick PCIe to use for the implicit
address busses (those lacking an explicit controller) and thus the
addresses must reflect that.
Update the test to add the new flags, and fix the addresses.
Additionally add a real-caps version of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the output changes of upcoming modernization more visible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real caps and clear out flags for PCIe so that we have a real-ish
example of an aarch64 machine using mmio.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test data is effectively identical to the
'aarch64-virtio-pci-default' case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a version for 'latest' caps as well as '4.2.0'. The test
demonstrates that with a real qemu PCIe will be used instead of MMIO.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the two negative cases to use real capapbilities as well as the
positive case for situations when KVM is not used by stripping the
QEMU_CAPS_KVM flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert 'aarch64-gic-default' and 'aarch64-gic-none' cases to use real
capabilities both latest and locked to 4.2.0 to show what would happen
with a real qemu.
Note that the qemuTestSetHostArch() calls are needed as real caps
override the setting once used. Once we convert all tests to real data
this can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will be modifying the tests for selecting the GIC
version to use real capabilities. This in certain cases will show that a
different version is picked.
Using symlinks makes it inconvenient to do the modifications and
unobvious what changed.
Remove the symlinks and replace them by real output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a test that checks newly introduced virAcpi module.
There are three IORT tables from a real HW (IORT_ampere,
IORT_gigabyte and IORT_qualcomm), then there's one from a VM
(IORT_virt_aarch64) and one that I handcrafted to be empty
(IORT_empty).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This flag is intended to be used exclusively in the context of
building GLib itself and should not be passed to the compiler
by a third-party project such as libvirt.
Reverts: 77d1fa5 ("tests: Compile virgdbusmock.c with GIO_COMPILATION enabled")
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the tests that use this mock (networkxml2firewalltest,
virsystemdtest, virpolkittest) are either no-ops on Windows, or
are not compiled at all on the target.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Left behind by commit 35eb484 ("tests: remove firewalld
backend tests from virfirewalltest.c").
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix the logic selecting when to run the tests to skip unknown variants
rather than the default variant.
Fixes: 738c5bae88
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that all tests were converted to use real capabilities we don't need
it any more. Remove it so that no new tests are added with it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the rest of the outstanding tests to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities for the CPU test. The negative test case for QEMUs
without QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION is removed as the feature is
now supported by all supported qemu versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'hostdev-subsys-mdev-vfio-ccw', 'hostdev-vfio-zpci', and
'hostdev-vfio-zpci-autogenerate-fids' test cases have negative versions
which are invoked without capabilities. This does not make sense going
forward as the tests are going to be switched to real capabilities.
Remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all tests were converted to use real capabilities we don't need
it any more. Remove it so that no new tests are added with it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the last outstanding test cases for ppc64 to use real
capabilities.
In couple cases this actually fixes the test case to test what it was
intending to do.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the tested features are always present in the 'pseries' machine
with oldest-supported qemu-4.2, thus the tests don't make sense any
more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an example case showing that every feature in the 'pseries-features'
test works also with the oldest supported qemu version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuhotplugtest validates only that a given command is used but not the
arguments of the command. With this patch we'll validate the arguments
against the QMP schema thus we can catch possible issues with deprecated
commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than test with synthetic capabilities which might get outdated
reuse testQemuGetRealCaps to fetch latest capabilities and use those.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass in the whole struct rather than splitting out individual members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With modern qemu we use 'set-action' instead of 'watchdog-set-action'.
Switch to it so that later qemuhotplugtest can be switched to use real
capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All real qemus support the 'lsilogic' controller and thus would pick it
as the default rather than virtio-scsi. Since lsilogic is limited in
some aspects we should test it with the proper default model.
In the future the fake capabilities will be replaced by real
capabilities so this test would break.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use testQemuGetRealCaps to fetch real capabilities and use it in place
of the faked caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the lookup of the corresponding QMP schema used for validation of
QMP commands from 'testCompareXMLToArgvValidateSchema' to
testQemuGetRealCaps as an optional step.
This will simplify using QMP command validation in other tests which
will use testQemuGetRealCaps.
'testutilsqemuschema' module is now linked into 'test_utils_qemu' as it
contains no monitor-specific code itself and after this patch it's
referenced directly from that module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'testQemuInfoInitArgs' contains the logic to fetch and use the
capabilities for tests using 'struct testQemuInfo'.
As in certain cases use of 'struct testQemuInfo' is an overkill extract
the code to fetch the capabilities into a standalone helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Technically for the LXC capabilities lookup we don't have another test
case, but given that it shares the implementation with qemu and thus the
only thing we are missing out on is testing of filling of the fake
capabilities which doesn't make sense testing.
Remove vircapstest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case doesn't validate the returned map of cpus, just checks
that it didn't fail. We test the returned value indirectly via
qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have testing based on real capabilities in 'qemucaps2xmltest' for
qemu guest related data and 'vircaps2xmltest' tests the host data
gathering. The testing done here makes no sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify use of the function by determining the number of elements
inside the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's never set to any real value. Remove it along with the caching code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests using this were refactored to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The last tests using it were refactored to use real capabilities and no
new tests should ever use it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The last tests using it were refactored to use real capabilities and no
new tests should ever use it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the possibility to control the variant of the test data for real
caps testing in qemuxml2argvtest and qemuxml2xmltest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The data is based on the generic variant of the 7.2.0 data on aarch64.
Only modification to the '.replies' file is that KVM is reported as
unavailable/unsupported.
Ideally this will be replaced by a dump captured from a real system.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The data is based on the generic variant of the 7.2.0 data on x86_64.
Only modification to the '.replies' file is that KVM is reported as
unavailable/unsupported.
Ideally this will be replaced by a dump captured from a real system.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to signal to the capabilities code that HVF variant is used so
that it can behave as if it were running on OSX.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It needs to be mocked only for 'qemucapabilitiestest'. Additionally
moving it here will allow to control the return value based on the test
data which will be required for testing dumps from HVF accelerated qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the architecture specific code to probe the support for HVF
from the actual setting of the capability.
In upcoming patches 'virQEMUCapsProbeHVF' will be mocked in the
testsuite to provide testing for the HVF hypervisor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The logic in 'virQEMUCapsInitQMP' invokes a second probe of qemu in case
when acceleration is used and TCG is supported to specifically probe the
CPU and features of non-accelerated guests.
The same logic must then be used in 'qemucapabilitiestest' when
replaying the data for testing otherwise the test would fail.
Export 'virQEMUCapsHaveAccel' for test usage and use the same logic
in 'testQemuCaps'.
Fix the comment in 'virQEMUCapsInitQMP' to outline what's happening.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow testing of capabilities of OSX systems with the hvf accelerator.
'domaincapstest' requires special handling as we need to set
VIR_DOMAIN_VIRT_HVF virt type in such case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use it to format test file name as in other cases. Currently
domaincapstest will not run for any unknown variant. This patch is meant
to simplify the review of patches doing actual functional changes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemucapabilitiestest' and other users of the capability data can
benefit from adding a discriminator string to have multiple instances
for the same version+architecture tuple.
This will in the future allow us to have specific capability versions
for test cases which require a specific host feature or are based on a
different operating system.
Add the basic skeleton for parsing the variant string and passing it
around into test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Explain what the purpose of these files is as well as how they are
named, captured, used and modified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fetch the full hash of 'latest' files and just return the correct one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than finding the newest caps file iteratively for specific
architectures in multiple passes over the directory we can simply load
the latest for everything in one pass by storing the version in the hash
table and filling it progressively.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Parsing a version where components are separated by dots, while other
components are also separated by dots is a bit insane. Separate the
version by an underscore.
To achieve this we rename all the caps files and adjust the appropriate
places formatting the path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Construct the capsName/emulator strings as initialization of variable
definition and move definition of 'struct testData' above the code.
This means that 'name' field will be initialized later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than trying to cram everything into one printf statement format
the type with prefix and machine with prefix separately and then
concatenate everything into the filename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The changes to the output files are the exact opposite of
those from commit 22207713cf: this is proof that the fix is
working as intended, and that existing domains will keep using
raw firmware images regardless of whether or not qcow2 images
are available on the system and have higher priority.
New domains will keep picking whatever firmware is considered
the preferred one according to the order of descriptors, as
evidenced by the fact that the recently introduced
firmware-auto-efi-abi-update-aarch64 test case is unaffected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The input is identical to that of the existing
firmware-auto-efi-aarch64 test, but in this case we want to
cover the scenario in which that input is used to define a new
domain rather than loading the definition of an existing domain
from disk.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are couple of g_dbus_*() functions we provide an
alternative implementation for in our virgdbusmock.c. However,
these functions are declared in gio/gdbusconnection.h as:
GIO_AVAILABLE_IN_ALL
GDBusConnection *g_bus_get_sync (GBusType bus_type,
GCancellable *cancellable,
GError **error);
where GIO_AVAILABLE_IN_ALL is declared as (in
/gio/gio-visibility.h):
#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(GIO_STATIC_COMPILATION)
# define _GIO_EXPORT __declspec(dllexport)
# define _GIO_IMPORT __declspec(dllimport)
#elif __GNUC__ >= 4
# define _GIO_EXPORT __attribute__((visibility("default")))
# define _GIO_IMPORT
#else
# define _GIO_EXPORT
# define _GIO_IMPORT
#endif
#ifdef GIO_COMPILATION
# define _GIO_API _GIO_EXPORT
#else
# define _GIO_API _GIO_IMPORT
#endif
#define _GIO_EXTERN _GIO_API extern
#define GIO_AVAILABLE_IN_ALL _GIO_EXTERN
Now, on mingw the functions we mock are declared with dllimport
attribute which makes the compiler unhappy:
../tests/virgdbusmock.c:25:24: error: 'g_bus_get_sync'
redeclared without dllimport attribute: previous dllimport
ignored [-Werror=attributes]
The solution is to do what glib does when it compiles the gio
module: set GIO_COMPILATION macro which in turn annotates the
function with dllexport attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Even when the user is not taking advantage of firmware
autoselection and instead manually providing all the necessary
information, in most cases they're still going to use firmware
builds that are provided by the OS vendor, are installed in
standard paths and come with a corresponding firmware
descriptor.
Similarly, even when the user is not guiding the autoselection
process by specifying the desired status of certain features
and instead is relying on the system-level descriptor priority
being set up correctly, libvirt will still ultimately decide to
use a specific descriptor, which includes information about the
firmware's features.
In both these cases, take the additional information that were
obtained from the firmware descriptor and reflect them back into
the domain XML, where they can be conveniently inspected by the
user and management applications alike.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we no longer reject configurations that include both
this information and explicit firmware details, as long of
course as everything is internally consistent, and that we've
ensured that we produce maximally compatible XML on migration,
we can stop stripping this information at the end of the
firmware selection process.
There are several advantages to keeping this information around:
* if the user wants to change the firmware configuration for
an existing VM, they can simply drop the <loader> and
<nvram> elements, tweak the firmware autoselection parameters
and let libvirt pick a firmware that matches on the new
requirements;
* management applications can inspect the XML and easily
figure out firmware-related information without having to
reverse-engineer them based on some opaque paths.
Overall, this change makes things more transparent and easier to
understand. The improvement is so significant that, in a
follow-up commit, we're going to ensure that this information is
available in even more cases.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libvirt 8.6.0 introduced these checks and very clearly delineated
two possible firmware selection scenarios: manual firmware
selection, where the user is responsible for providing all
information, and firmware autoselection, where a list of desired
features is provided and everything else is handled by libvirt.
In the interest of maintaining the clear separation between these
two scenarios, setting most attributes when firmware autoselection
is active will result in the configuration being rejected.
This works fine, but is unnecessarily restrictive: in most cases,
the additional information that the user has provided matches
the information that libvirt would have discovered on its own by
looking at firmware descriptors, and asking the user to scrub it
from the XML only result in pointless friction.
Remove these checks entirely.
Unsurprisingly, this results in a few test cases that were
rejected until now to suddenly start working and producing
sensible results.
The firmware-auto-efi-loader-path-nonstandard test case is
notable: while we can now enable the xml2xml part of the test,
the xml2argv part is still failing, although in a slightly
different way. This is expected: since the firmware binary is a
non-standard one, libvirt is unable to figure out the missing
information from a firmware descriptor, and the configuration
is still ultimately an invalid one. However, if we were to find
such a configuration on disk at daemon startup, we would not
ignore it completely and instead would offer the user a chance
to fix it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now we're checking that firmware descriptor masking works
as intended by creating an empty file matching 60-ovmf-sb.json
in name.
However, that firmware descriptors contains the details for a
perfectly valid and quite common situation: Secure Boot being
supported by the firmware build, but being effectively disabled
by the lack of certificates in the NVRAM template.
Unmask that firmware descriptor, and instead create a dummy one
that has higher priority than all other OVMF builds and points
to paths that are obviously incorrect, which should make it
easy to notice it getting accidentally unmasked in the future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These cover the same scenarios as the matching test cases for
autoselection.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is identical to the existing
firmware-auto-efi-loader-path-nonstandard test case, but uses
a standard firmware path.
Right now the two test cases behave identically, but that's
going to change in the future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This test is intended to simulate the use of an OVMF firmware
image installed under a non-standard path. In order to make
such a configuration work, the user would have to provide
additional information.
Right now it doesn't matter, because the configuration is
rejected anyway, but the behavior is going to change slightly
in the future. Prepare by making the configuration more
complete and realistic.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This unifies the naming between the manual and automatic
selection cases, clarifies the contents of the tests and makes
room for more tests being added in the future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The newly added luks-any rbd encryption format in qemu
allows for opening both LUKS and LUKS2 encryption formats.
This commit enables libvirt uses to use this wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability represents that qemu supports the "luks-any" encryption
format for RBD images.
Both LUKS and LUKS2 formats can be parsed using this wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit enables libvirt users to use layered encryption
of RBD images, using the librbd encryption engine.
This allows opening of an encrypted cloned image
whose parent is encrypted with a possibly different encryption key.
To open such images, multiple encryption secrets are expected
to be defined under the encryption XML tag.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit changes the _qemuDomainStorageSourcePrivate struct
to support multiple secrets (instead of a single one before this commit).
This will useful for storage encryption requiring more than a single secret.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability represents that qemu supports the layered encryption
of RBD images, where a cloned image is encrypted with a possible
different encryption than its parent image.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When a thread-context object is specified on the cmd line, then
QEMU spawns a thread and sets its affinity to the list of NUMA
nodes specified in .node-affinity attribute. And this works just
fine, until the main QEMU thread itself is not restricted.
Because of v5.3.0-rc1~18 we restrict the main emulator thread
even before QEMU is executed and thus then it tries to set
affinity of a thread-context thread, it inevitably fails with:
Setting CPU affinity failed: Invalid argument
Now, we could lift the pinning temporarily, let QEMU spawn all
thread-context threads, and enforce pinning again, but that would
require some form of communication with QEMU (maybe -preconfig?).
But that would still be wrong, because it would circumvent
<emulatorpin/>.
Technically speaking, thread-context is an internal
implementation detail of QEMU, and if it weren't for it, the main
emulator thread would be doing the allocation. Therefore, we
should honor the pinning and prune the list of node so that
inaccessible ones are dropped.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2154750
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Since qemuxml2argvtest is now using virnumamock, there's no need
for qemuxml2argvmock to offer reimplementation of virNuma*()
functions. Also, the comment about CLang and FreeBSD (introduced
in v4.3.0-40-g77ac204d14) is no longer true. Looks like noinline
attribute was the missing culprit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
So far, the memory-hotplug-dimm-addr.xml test case pins its vCPUs
onto CPUs 0-1 which correspond to NUMA node #0 (per
tests/vircaps2xmldata/linux-basic/system/node/node0). Place vCPUs
onto nodes #1 and #2 too so that DIMM <memory/> device can
continue using thread-context after future patches. This
configuration, as-is currently, would make QEMU error out anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We have couple of qemuxml2argvtest cases where up to 8 NUMA nodes
are assumed. These are used to check whether disjoint ranges of
host-nodes= is generated properly. Without prejudice to the
generality, we can rewrite corresponding XML files to use up to 4
NUMA nodes and still have disjoint ranges.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While no part of cmd line building process currently depends on a
host NUMA configuration, this will change soon. Use freshly
changed virnumamock from qemuxml2argvtest and make the mock read
NUMA data from vircaps2xmldata which seems to have the most rich
NUMA configuration.
This also means, we have to start building virnumamock
unconditionally. But this is not a problem, since nothing inside
of the mock relies on Linux specificity. The whole mock is merely
just reading files and parsing them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduce a mock of virNumaGetNodeOfCPU() because soon we will
need virNumaCPUSetToNodeset() to return predictable results.
Also, fill in missing symlinks in vircaps2xmldata/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In a few places we still use the good old:
sizeof(var) / sizeof(var[0])
sizeof(var) / sizeof(int)
The G_N_ELEMENTS() macro is preferred though. In a few places we
don't link with glib, so provide the macro definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
libxl added support for specifying custom firmware paths long ago. The
functionality exists in all Xen version supported by libvirt. This patch
adds support for user-specified efi firmware paths in the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='nbd' name='foo'>
<host name='example.org' port='6000'/>
<reconnect delay='10'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 54fa1b44af ("conf: Add loadparm boot option for a boot device")
added the ability to specify a loadparm parameter on a <boot/> tag, while
commit 29ba41c2d4 ("qemu: Add loadparm to qemu command line string")
added that value to the QEMU "-machine" command line parameters.
Unfortunately, the latter commit only looked at disks and network
devices for boot information, even though anything with
VIR_DOMAIN_DEF_FORMAT_ALLOW_BOOT could potentially have this tag.
In practice, a <hostdev> tag pointing to a passthrough (SCSI or DASD)
disk device can be used in this way, which means the loadparm is
accepted, but not given to QEMU.
Correct this, and add some XML/argv tests.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This can improve performance for some guests since it reduces copying of
display data between host and guest. Requires udmabuf on the host.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Capability to determine whether this qemu supports the 'blob' option for
virtio-gpu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function doesn't set any capability and we don't want to add
arch-dependent always-peresent capabilities in the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_AES_KEY_WRAP, QEMU_CAPS_DEA_KEY_WRAP and QEMU_CAPS_LOADPARM
are always asserted via virQEMUCapsInitQMPBasicArch thus don't need to
be explicitly enabled by tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
testUpdateQEMUCaps calls virQEMUCapsInitQMPBasicArch which already sets
it. Purge the capability from the testing code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability is based on a platform check rather than what given qemu
supports.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 24cc9cda82 switched over to use -machine hpet, but one of the
steps it did was to clear the QEMU_CAPS_NO_HPET capability.
The validation check still uses the old capability though which means
that for configs which would explicitly enable HPET we'd report an error.
Since HPET is an x86(_64) platform specific device, convert the
validation check to an architecture check as all supported qemu versions
actually support it.
Modify a test case to request HPET to catch posible future problems.
Fixes: 24cc9cda82
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemu-system-aarch64' is superset of the soon to be deprecated
'qemu-system-arm' binary. We can move over all of our fake-caps tests to
real caps on aarch64.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always assert the flag for aarch64 qemus and in qemu the 'aarch64'
cpu property doesn't seem to be optional.
Remove checks and remove impossible test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the 'ppc-dtb' and 'ppce500-serial' to use real capabilities
albeit captured from a non-native machine. Thus the XML needs to be
converted to use virt type 'qemu'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The data are obtained from a x86_64 machine thus don't really represent
physical hardware, but it's better than nothing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Preserve testing of the MMIO use case in case when GPEX is complied out
of qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain cases we want to use as-real capabilities as possible but
that doesn't allow testing certain fallback scenarios of features that
can be complied out of QEMU.
ARG_QEMU_CAPS_DEL can be used similarly to ARG_QEMU_CAPS but the flag
arguments are actually masked out of the resulting caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather that populate a virQEMUCaps object we now populate a bitmap with
the fake capabilities and transfer it into the virQEMUCaps later.
This unifies the code paths between the fully fake caps tests and real
caps + fake flags.
Also the same approach will be used in upcomming patch to add
possibility to mask out flags from real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's just one case when we're populating the cache with empty caps so
that can allocate a dummy virQEMUCaps object rather than having the
logic inside qemuTestCapsCacheInsertImpl.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make all callers always pass a valid pointer which in turn allows us to
remove return value check from the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The allocation of the object itself can't fail. What can fail is the
creation of the class on a programming error. Rather than punting the
error up the stack abort() directly on the first occurence as the error
can't be fixed during runtime.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both 'kvm_machines' and 'qemu_machines' now have the same members so we
can simply drop kvm_machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the only outstanding test case for a 'sparc' machine to modern
test infrastructure.
'sparc' machine type also needs to be added to the list of supported
arches in testQemuGetLatestCaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Real capabilities populate the binary name, while fake don't. We can
directly insert the capabilities using the real binary name.
This will allow to remove 'qemu_emulators' entries once all tests are
converted to real capabilties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make callers use virFileCacheClear to clear the cache before populating
it rather than trying to overwrite what's in it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use x86_64 emulator and machine and remove the nocaps version of the
test.
Fixes: 80a37e96a9
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Integrate the two special cases used for schema testing into the more
useful qemuxml2argvtest, whose input data is still tested against the
schema.
Add also a xml output variant.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The schema tested by removed test cases is tested by other, more useful,
test cases:
- 'maxMemory'
- qemuxmlargvdata/memory-hotplug*
- 'backingChains'
- qemuxmlargvdata/disk-backing-chains*
- 'timers'
- qemuxml2argvdata/kvm-pit-delay.xml
- qemuxml2argvdata/clock-catchup.xml
- 'qemu-simple-description-title.xml'
- 'qemuxml2argvdata/minimal.xml
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out that those overrides I recently removed where actually
there for a reason, and there was a motivation behind creating
the driver config as unprivileged too O:-)
Until a solution that can both ensure predictable output and
avoid code duplication is developed, go back to the previous
approach.
Fixes: 2f56f69f7f ("tests: Create privileged config for QEMU driver")
Fixes: 0f49b6cc6b ("tests: Drop no longer necessary overrides")
Fixes: 0b464cd84f ("tests: Drop more QEMU driver config overrides")
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
These are allegedly necessary to keep the output consistent,
but now that we're using a privileged config for the driver we
get the desired behavior out of the box, and as a bonus the
paths match what you would actually see on a regular host.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We use standard paths for almost everything else.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
For almost all directories, the value we set matches the one
a standard deployment would use, but in a couple of cases they
deviate from that. Keep things consistent.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
None of these settings is specific to the xml2argv test. Moving
them to the common code ensures the behavior of the QEMU driver
is consistent across all QEMU tests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Creating a privileged config ensures these are already set
correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Our QEMU test suite effectively covers the qemu:///system
scenario, and we have to partially replace the unprivileged
config with its privileged equivalent after the fact to keep up
the illusion.
Instead of jumping through these extra hoops, we can simply
start with a privileged configuration matching the privileged
driver we're creating for test programs.
This change highlights that we were missing a couple of
overrides, specifically in the tests for passt and dbus. Now
that we're creating a privileged config, this kind of issue
shouldn't be able to slip into the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Most test programs were already doing this, and moving it to
the common code ensures we see consistent behavior across all
QEMU tests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
These are intended to be used for just a few specific tests,
but since we don't always free them up afterwards they could
end up accidentally affecting subsequent tests as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Follow the example of other similar settings and only enable it
for the few test cases that are actually about the specific
functionality, disabling it immediately afterwards.
A few test cases that were completely unrelated to SPICE TLS no
longer see the effects of having the feature enabled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Just like TLSx509certdirs, these can be set throughout the
lifetime of the test program.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The various TLSx509certdirs can be set throughout the lifetime
of the test program without issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We use these in QEMU command lines, so we should poison them
to catch test suite issues.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
QEMU deprecated the '-no-acpi' option, thus we should switch to the
modern way to use '-machine'.
Certain ARM machine types don't support ACPI. Given our historically
broken design of using '<acpi/>' without attribute to enable ACPI and
qemu's default of enabling it without '-no-acpi' such configurations
would not work.
Now when qemu reports whether given machine type supports ACPI we can do
a better decision and un-break those configs. Unfortunately not
retroactively.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/297
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The return data from 'query-machines' now contains an 'acpi' field. If
the field is present we can use it to decide how to handle user's
setting of '<acpi/>' domain feature.
Add logic to extract the 'acpi' field and store it in machine type list
along with other properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v7.2.0-2146-g2946e1af27
Notable changes:
- 'acpi' field in 'query-machines' added
- 'SapphireRapids(-v1)' cpu model added
- 'fsrs', 'fsrc', 'fzrm' cpu features added and available via TCG
- 'fsrm' feature can be now emulated by qemu
- 'smm-enabled' property added to 'ICH9-LPC' device
- 'luks-any' encryption type for RBD blockdev backend and way to
specify encryption options for parent image via 'parent'
- 'xen-event-inject', 'xen-event-list' commands added
- 'xen-xenstore', 'xen-gnttab', 'xen-evtchn', 'xen-overlay',
'xen-platform'
- 'i2c-echo' device added
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now always assume support for polling mode of iothreads.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove disks which are not necessary to demonstrate iothread config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use latest caps for the tests even though the original test case didn't
need any capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the cputune-iothreads, cputune-iothreadsched-zeropriority,
cputune-iothreadsched test files by moving the relevant elements into
the cputune case as we can setup scheduler settings for multiple objects
and thus test everything in one go.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST for cputune-numatune, cputune-zero-shares,
cputune, and vcpu-placement-static cases. Do the necessary tweaks to
work with actual data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST for the basic tests. The emulator needed to be
tweaked to work with the real caps data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'iothreads-disk' covers everything that 'iothreads' did in addition to
actually using the iothread.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions now support iothreads thus upcoming patches
will be removing the capability checks. Remove the 'iothreads-nocap'
case which will become invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setting the LIBVIRT_SKIP_CLEANUP environment variable results
in the contents of fakerootdir being preserved for inspection.
Be more helpful towards the developer and print out the path
in this case.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Instead of having each test manually initialize and cleanup
its own fakerootdir, do that as part of the common test
initialization logic in virTestMain().
In most cases we can simply drop the relevant code from the
test program, but scsihosttest uses the value of fakerootdir
as a starting point to build another path, so we need to do
things slightly differently. In order to keep things working,
we retrieve the value from the LIBVIRT_FAKE_ROOT_DIR
environment variable, same as all the mock libraries are
already doing.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Most replacements are completely straightforward but
vircgrouptest requires slightly different handling because,
instead of initializing a single fakerootdir at the start of
the test program and cleaning it up at the end, it creates
multiple different ones one after the other.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
We have this logic open-coded all over the test suite. Provide
proper helpers implementing it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
These cover various scenarios related to firmware formats,
specifically ensuring that all the ways in which the user can
ask for a non-default format to be used work correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, firmware selection is performed as part of the
domain startup process. This mostly works fine, but there's a
significant downside to this approach: since the process is
affected by factors outside of libvirt's control, specifically
the contents of the various JSON firmware descriptors and
their names, it's pretty much impossible to guarantee that the
outcome is always going to be the same. It would only take an
edk2 update, or a change made by the local admin, to render a
domain unbootable or downgrade its boot security.
To avoid this, move firmware selection to the postparse phase.
This way it will only be performed once, when the domain is
first defined; subsequent boots will not need to go through
the process again, as all the paths that were picked during
firmware selection are recorded in the domain XML.
Care is taken to ensure that existing domains are handled
correctly, even if their firmware configuration can't be
successfully resolved. Failure to complete the firmware
selection process is only considered fatal when defining a
new domain; in all other cases the error will be reported
during startup, as is already the case today.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we ignore all firmwares that are not in raw format
while performing autoselection, we can have descriptors for
firmware builds in QCOW2 format without breaking anything.
Note that the descriptors are arranged so that they have the
highest priority on aarch64, but the lowest one on x86_64.
This matches the expectation that QCOW2 will quickly be
adopted as the default on aarch64, where its use produces
significant benefits in terms of memory usage, while x86_64
will likely stick with raw for the foreseeable future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, if SMM is explicitly disabled in the domain XML
but a firmware descriptor that requires SMM to be enabled has
the highest priority and otherwise matches the requirements,
we pick that firmware only to error out later, when the domain
is started.
A better approach is to take into account the fact that SMM is
disabled while performing autoselection, and ignore all
descriptors that advertise the requires-smm feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These cover scenarios such as using the new, more verbose
format of the <nvram> element to point to a local path, mixing
firmware autoselection with non-local NVRAM files, and
explicitly disabling SMM when using firmware autoselection.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some of the test cases had only been added to the xml2argv
test program and not to the xml2xml one.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of the differences, such as those in the domain name or
amount of memory, are fairly harmless, but they still make it
more cumbersome than necessary to directly compare different
input (and output) files.
More importantly, the use of unversioned machine types in some
of the test cases results in the descriptor-based autoselection
logic being effectively skipped, because the compatible machine
types as listed in them are only the versioned variants.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already the case for the vast majority, but a few are
using explicit capabilities lists.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most test cases are on 64-bit architectures already, but there
are a couple of exceptions.
Right now this works, but it will no longer fly after some
upcoming changes. Prepare for those by switching away from
32-bit architectures.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already do this in qemuxml2argvtest.
Right now setting this doesn't change anything, but it will
become relevant later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU's "reconnect" option of "-netdev stream" tells QEMU to
periodically (period is given in seconds as an argument to the option)
attempt to reconnect to the same passt socket to which it had
originally connected to. This is useful in cases where the passt
process terminates, and libvirtd starts a new passt process in its
place (which doesn't happen yet, but will happen automatically after
an upcoming patch in this series).
Since there is no real hueristic for determining the "best" value of
the reconnect interval, rather than clutter up config with a knob that
nobody knows how to properly twiddle, we just set the reconnect timer
to 5 seconds.
"-netdev stream" first appeared in QEMU 7.2.0, but the reconnect
option won't be available until QEMU 8.0.0, so we need to check QEMU
capabilities just in case someone is using QEMU 7.2.0 (and thus can
support passt backend, but not reconnect)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Detect that the 'stream' netdev backend supports reconnecting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In commit 5af6134e I had added a new capability that is true if QEMU
allows "-netdev stream", but somehow neglected to actually check it in
commit a56f0168d when hooking up passt support to qemu. This isn't
catastrophic, since QEMU itself will still report an error, but that
error isn't as easy to understand as a libvirt-generated error.
Fixes: a56f0168d5
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability detects the availability of the pvpanic-pci
device that is required in order to use pvpanic on Arm (original
pvpanic is an emulated ISA device, for which Arm does not have
support).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Whilst reviewing a patch upstream (that ended up as
v9.0.0-200-g092176e5ec), I realized we don't have a single
xml2xml test for CH driver. Well, introduce the test with one
simple test case for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When running "virsh domcapabilities" on a s390x host, all the CPU
models show up with vendor='unknown' - which sounds kind of weird
since the vendor of these mainframe CPUs is well known: IBM.
All CPUs starting with either "z" or "gen" match a real mainframe
CPU by IBM, so let's return the string "IBM" for those now.
The only remaining ones are now the artifical "qemu" and "max"
models from QEMU itself, so it should be OK to get an "unknown"
vendor for those two.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Boris Fiuczynski<fiuczy@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virURIFormat() function either returns a string, or aborts
(on OOM). There's no way this function can return NULL (as of
v7.2.0-rc1~277). Therefore, it doesn't make sense to check its
retval against NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With the current way the myInit() is written, it's fairly easy to
miss initialization of @subsys variable as the variable is
allocated firstly on the stack and then it's assigned to
hostdev[i] which was allocated using g_new0() (this it is
containing nothing but all zeroes).
Make the subsys point to the corresponding member in hostdev[i]
from the start. This way only the important bits are overwritten
and the rest stays initialized to zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
With recent work on storing original PCI stats in
_virDomainHostdevSubsysPCI struct, the virhostdevtest can across
a latent bug we had. Only some parts of the
virDomainHostdevSubsys structure are initialized. Incidentally,
subsys->u.pci.origstates is not one of them. This lead to
unexpected crashes at runtime.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use virDomainDeviceType as type and update all switch statements which
didn't mention all possible values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
