The libgfapi function glfs_fini doesn't tolerate NULL pointers. Add a
check on the error paths as it's possible to crash libvirtd if the
gluster volume can't be initialized.
It's finally time to start tracking disk backing chains in
<domain> XML. The first step is to start refactoring code
so that we have an object more convenient for representing
each host source resource in the context of a single guest
<disk>. Ultimately, I plan to move the new type into src/util
where it can be reused by virStorageFile, but to make the
transition easier to review, this patch just creates the
new type then fixes everything until it compiles again.
* src/conf/domain_conf.h (_virDomainDiskDef): Split...
(_virDomainDiskSourceDef): ...to new struct.
(virDomainDiskAuthClear): Use new type.
* src/conf/domain_conf.c (virDomainDiskDefFree): Split...
(virDomainDiskSourceDefClear): ...to new function.
(virDomainDiskGetType, virDomainDiskSetType)
(virDomainDiskGetSource, virDomainDiskSetSource)
(virDomainDiskGetDriver, virDomainDiskSetDriver)
(virDomainDiskGetFormat, virDomainDiskSetFormat)
(virDomainDiskAuthClear, virDomainDiskGetActualType)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormat)
(virDomainDiskDefFormat, virDomainDiskDefForeachPath)
(virDomainDiskDefGetSecurityLabelDef)
(virDomainDiskSourceIsBlockType): Adjust all users.
* src/lxc/lxc_controller.c (virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceMknodHelper):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost, qemuParseRBDString)
(qemuParseDriveURIString, qemuParseGlusterString)
(qemuParseISCSIString, qemuParseNBDString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddISCSIPoolSourceHost, qemuTranslateDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainUpdateDeviceConfig)
(qemuDomainPrepareDiskChainElement)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive)
(qemuDomainBlockPivot, qemuDomainBlockJobImpl)
(qemuDomainBlockCopy, qemuDomainBlockCommit): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessInitPasswords): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/storage/storage_driver.c (virStorageFileInitFromDiskDef):
Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
If we cannot stat/open a file on pool refresh, returning -1 aborts
the refresh and the pool is undefined.
Only treat missing files as fatal unless VolOpenCheckMode is called
with the VIR_STORAGE_VOL_OPEN_ERROR flag. If this flag is missing
(when it's called from virStorageBackendProbeTarget in
virStorageBackendFileSystemRefresh), only emit a warning and return
-2 to let the caller skip over the file.
https://bugzilla.redhat.com/show_bug.cgi?id=977706
Without this, using /dev/mapper as a directory pool
fails in virStorageBackendUpdateVolTargetInfoFD:
cannot seek to end of file '/dev/mapper/control': Illegal seek
Skip over character devices by default.
https://bugzilla.redhat.com/show_bug.cgi?id=710866
virStorageBackendISCSISession only needs the path of the source
device and virStorageBackendISCSIRescanLUNs doesn't need the pool
at all.
This will allow the functions to be moved to src/util.
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Coverity found an issue in lxc_driver and uml_driver that we don't
check the return value of register functions.
I've also updated all other places and unify the way we check the
return value.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
From commit id 'd53bbfd1'
Found one core and one possible memory leak. Core seen during local
virt-test/tp_libvirt run for the vol_create_from test. The memory leak
was seen by inspection during a review of all VIR_APPEND_ELEMENT changes
In storage_backend_disk/virStorageBackendDiskMakeDataVol(), the 'vol'
needs to be kept around since it's used later, so use the _COPY macro.
This caused a segv in libvirtd:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffe87c3700 (LWP 6919)]
virStorageBackendDiskMakeDataVol (vol=0x0, groups=0x7fffc8000d70, pool=0x7fffc8002460) at storage/storage_backend_disk.c:66
66 if (vol->target.path == NULL) {
In storage_backend_rbd/virStorageBackendRBDRefreshPool() there's a failure
path where the 'vol' needs to go through virStorageVolDefFree() since it
wouldn't be appended.
In storageVolLookupByPath the provided path is "sanitized" at first.
This removes some extra slashes and stuff. When the lookup of the volume
fails the original path is used which makes it hard to trace errors in
some cases.
Improve the error message to print the sanitized path along with the
user provided path if they are not equal.
When looking up a volume by path on a non-local filesystem don't use the
"cleaned" path that might be mangled in such a way that it will differ
from a path provided by a storage backend.
Skip the cleanup step for gluster, sheepdog and RBD.
Pools that are not backed by files in the filesystem cause problems with
some APIs. Error out when attempting to upload a volume in such a pool
as currently we expect a local file representation for it.
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations. Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit. Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big. And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.
So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.
* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
These timeout values make librados/librbd return -ETIMEDOUT when a
operation is blocking due to a failing/unreachable Ceph cluster.
By having the operations time out libvirt will not block.
The internal pools were an idea in one of the first iterations of the
gluster series, which we decided not to use. Somehow the patch still
got pushed. Remove it as the internal flag isn't needed.
This reverts commit 362da8209d.
In a44b7b87bc I've introduced a function
that initializes a storage file wrapper object on gluster based volumes.
The initialization function leaks the private data pointer in case of
failure. This patch fixes it.
Reported by John Ferlan.
In commit e32268184b I accidentally added
twice a typedef for virStorageFileBackend when I moved it between files
across patch iterations. The double declaration breaks build on older
compilers in RHEL5 and FreeBSD.
Remove the spurious definition.
Add APIs that will allow to use the storage driver to assist in
operations on files even for remote filesystems without native
representation as files in the host.
virGetStorageVol can return NULL on out-of-memory. If it does, cleanly
abort the volume clone operation.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
This reverts commit 67ccf91bf2.
We only generate the volume key after we've built it, but the storage
driver expects it to be filled after createVol finishes.
Squash the volume building back with creating to fulfill this
expectation.
This new RBD format supports snapshotting and cloning. By having
libvirt create images in format 2 end-users of the created images
can benefit from the new RBD format.
Older versions of libvirt can work with this new RBD format as long
as librbd supports format 2. RBD format is supported by librbd since
version 0.56 (Ceph Bobtail).
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When restarting sheepdog pool, all volumes are missing.
This patch add automatically all volume from the added pool.
Adding last Daniel P. Berrange's syntaxes correction.
Adding vol on separeted function 'inspired' from parallels_storage :
parallelsAddDiskVolume
The "checkPool" is a bit different for pool with "fc_host"
type source adapter, since the vHBA it's based on might be
not created yet (it's created by "startPool", which is
involked after "checkPool" in storageDriverAutostart). So it
should not fail, otherwise the "autostart" of the pool will
fail either.
The problem is easy to reproduce:
* Enable "autostart" for the pool
* Restart libvirtd service
* Check the pool's state
For pool which relies on remote resources, such as a "iscsi" type
pool, since how long it takes to export the corresponding devices
to host's sysfs is really depended, it could depend on the network
connection, it also could depend on the host's udev procedures. So
it's likely that the volumes are not able to be detected during pool
starting process, polling the sysfs doesn't work, since we don't
know how much time is best for the polling, and even worse, the
volumes could still be not detected or partly not detected even after
the polling. So we end up with a documentation to prompt the fact,
in virsh manual.
And as a small improvement, let's explicitly say no LUNs found in
the debug log in that case.
The public virConnectRef and virConnectClose API are just thin
wrappers around virObjectRef/virObjectRef, with added object
validation and an error reset. Within our backend drivers, use
of the object validation is just an inefficiency since we always
pass valid objects. More important to think about is what
happens with the error reset; our uses of virConnectRef happened
to be safe (since we hadn't encountered any earlier errors), but
in several cases the use of virConnectClose could lose a real
error.
Ideally, we should also avoid calling virConnectOpen() from
within backend drivers - but that is a known situation that
needs much more design work.
* src/qemu/qemu_process.c (qemuProcessReconnectHelper)
(qemuProcessReconnect): Avoid nested public API call.
* src/qemu/qemu_driver.c (qemuAutostartDomains)
(qemuStateInitialize, qemuStateStop): Likewise.
* src/qemu/qemu_migration.c (doPeer2PeerMigrate): Likewise.
* src/storage/storage_driver.c (storageDriverAutostart):
Likewise.
* src/uml/uml_driver.c (umlAutostartConfigs): Likewise.
* src/lxc/lxc_process.c (virLXCProcessAutostartAll): Likewise.
(virLXCProcessReboot): Likewise, and avoid leaking conn on error.
Signed-off-by: Eric Blake <eblake@redhat.com>
To allow using the storage driver APIs to do operation on generic domain
disks we will need to introduce internal storage pools that will give is
a base to support this stuff even on files that weren't originally
defined as a part of the pool.
This patch introduces the 'internal' flag for a storage pool that will
prevent it from being listed along with the user defined storage pools.
Separate the steps to create libvirt's volume metadata from the actual
volume building process. This is already done for regular file based
pools to allow job support for storage APIs.
The commit cad3cf9a95 introduced a crash
due to wrong order of parameters being passed to the function. When
deleting an element, the function decreased the iterator instead of
count and if listing volumes after that (or undefining the pool, NULL
was being dereferenced.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 6cd60b6 was flat out broken - it tried to print into the
wrong variable. My testing was obviously too cursory (did the
name get a slash added?); valgrind would have caught the error.
Thankfully it didn't hit any release.
Reported by Peter Krempa.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Fix bogus code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Move the code around so that the forward declaration isn't needed. Also
fix code style of the opening brace of the function by moving it to a
separate line.
Currently, 'vol-resize --allocate' allocates new space at the
vol->capacity offset. But the vol->capacity is not necessarily the same
as vol->allocation. For instance:.
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 1.00 GiB 1.00 GiB
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 2G
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 2.00 GiB 1.00 GiB
So, if we want to allocate more bytes, so the file is say 3G big, the
real allocated size is 2G actually:
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 3.00 GiB 2.00 GiB
This commit uses the correct vol->allocation instead of incorrect
vol->capacity, so the output of the commands above looks like this:
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 3.00 GiB 3.00 GiB
Moreover, if the '--alocate' flag was used, we must update the
vol->allocation member in storageVolResize API too, not just
vol->capacity.
Reported-by: Wang Sen <wangsen@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This variable shadows the stat(2) function, which only became visible in
this scope as of commit 9cac8639. Rename the variable so it doesn't
conflict.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When doing 'virsh vol-dumpxml' on a gluster pool's volume, the
resulting URI incorrectly omitted a slash between hostname and
path: gluster://192.168.122.206rhsvol1/fedora-19.img
This is fallout from me rebasing earlier versions of my patch
that ended up as commit efee1af; I had originally played with
always requiring the gluster volume to have a leading slash,
but it was easier to use the gluster API if the gluster volume
name was guaranteed to have no slash. While I got the URI of
the pool correct, I forgot to fix the URI of a libvirt volume.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Use correct starting point
since uri construction requires leading slash.
Signed-off-by: Eric Blake <eblake@redhat.com>
Kill the use of atoi() and introduce syntax check to forbid it and it's
friends (atol, atoll, atof, atoq).
Also fix a typo in variable name holding the cylinders count of a disk
pool (apparently unused).
examples/domsuspend/suspend.c will need a larger scale refactor as the
whole example file is broken thus it will be exempted from the syntax
check for now.
The storageRegister() didn't check the return from the
virRegisterStorageDriver() like other callers did, so Coverity
flagged it. Just check the return and handle.
When attempting to backport gluster pools to an older versoin
where there is no VIR_STRDUP, I got a crash from calling
strdup(,NULL). Rather than relying on the current else branch
safely doing nothing when there is no fd, it is easier to just
skip it. While at it, there's no need to explicitly set
perms.label to NULL after a VIR_FREE().
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD): Minor optimization.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 348b4e2 introduced a potential problem (thankfully not
in any release): we are attempting to use virFileReadHeaderFD()
on a file that was opened with O_NONBLOCK. While this
shouldn't be a problem in practice (because O_NONBLOCK
typically doesn't affect regular or block files, and fifos and
sockets cannot be storage volumes), it's better to play it safe
to avoid races from opening an unexpected file type while also
avoiding problems with having to handle EAGAIN while read()ing.
Based on a report by Dan Berrange.
* src/storage/storage_backend.c
(virStorageBackendVolOpenCheckMode): Fix up fd after avoiding race.
Signed-off-by: Eric Blake <eblake@redhat.com>
You'd think I'd learn to actually COMMIT my working tree
between testing that a last-minute fix compiles and pushing.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Typo fix.
Signed-off-by: Eric Blake <eblake@redhat.com>
Putting together pieces from previous patches, it is now possible
for 'virsh vol-dumpxml --pool gluster volname' to report metadata
about a qcow2 file stored on gluster. The backing file is still
treated as raw; to fix that, more patches are needed to make the
storage backing chain analysis recursive rather than halting at
a network protocol name, but that work will not need any further
calls into libgfapi so much as just reusing this code, and that
should be the only code outside of the storage driver that needs
any help from libgfapi. Any additional use of libgfapi within
libvirt should only be needed for implementing storage pool APIs
such as volume creation or resizing, where backing chain analysis
should be unaffected.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterReadHeader): New helper function.
(virStorageBackendGlusterRefreshVol): Probe non-raw files.
Signed-off-by: Eric Blake <eblake@redhat.com>
With this patch, dangling and looping symlinks are silently
ignored, while links to files and directories are treated the
same as the underlying file or directory. This is the same
behavior as both 'directory' and 'netfs' pools.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Treat symlinks similar to
directory and netfs pools.
Signed-off-by: Eric Blake <eblake@redhat.com>
We already had code for handling allocation different than
capacity for sparse files; we just had to wire it up to be
used when inspecting gluster images.
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD): Handle no fd.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Handle sparse files.
Signed-off-by: Eric Blake <eblake@redhat.com>
Take advantage of the previous patch's addition of 'netdir' as
a distinct volume type, to expose rather than silently skip
directories embedded in a gluster pool. Also serves as an XML
validation for the previous patch.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Don't skip directories.
* tests/storagevolxml2xmltest.c (mymain): Add test.
* tests/storagevolxml2xmlin/vol-gluster-dir.xml: New file.
* tests/storagevolxml2xmlout/vol-gluster-dir.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory. But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch. Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).
* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Actually put gfapi to use, by allowing the creation of a gluster
pool. Right now, all volumes are treated as raw and directories
are skipped; further patches will allow peering into files to
allow for qcow2 files and backing chains, and reporting proper
volume allocation. This implementation was tested against Fedora
19's glusterfs 3.4.1; it might be made simpler by requiring a
higher minimum, and/or require more hacks to work with a lower
minimum.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshPool): Initial implementation.
(virStorageBackendGlusterOpen, virStorageBackendGlusterClose)
(virStorageBackendGlusterRefreshVol): New helper functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
We support gluster volumes in domain XML, so we also ought to
support them as a storage pool. Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents. This sets up the framework.
Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.
This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested. A future patch may lower
the minimum. On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].
[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html
* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.
Signed-off-by: Eric Blake <eblake@redhat.com>
$ touch /var/lib/libvirt/images/'a<b>c'
$ virsh pool-refresh default
$ virsh vol-dumpxml 'a<b>c' default | head -n2
<volume>
<name>a<b>c</name>
Oops. That's not valid XML. And when we fix the XML
generation, it fails RelaxNG validation.
I'm also tired of seeing <key>(null)</key> in the example
output for volume xml; while we used NULLSTR() to avoid
a NULL deref rather than relying on glibc's printf
extension behavior, it's even better if we avoid the issue
in the first place. But this requires being careful that
we don't invalidate any storage backends that were relying
on key being unassigned during virStoragVolCreateXML[From].
I would have split this into two patches (one for escaping,
one for avoiding <key>(null)</key>), but since they both
end up touching a lot of the same test files, I ended up
merging it into one.
Note that this patch allows pretty much any volume name
that can appear in a directory (excluding . and .. because
those are special), but does nothing to change the current
(unenforced) RelaxNG claim that pool names will consist
only of letters, numbers, _, -, and +. Tightening the C
code to match RelaxNG patterns and/or relaxing the grammar
to match the C code for pool names is a task for another
day (but remember, we DID recently tighten C code for
domain names to exclude a leading '.').
* src/conf/storage_conf.c (virStoragePoolSourceFormat)
(virStoragePoolDefFormat, virStorageVolTargetDefFormat)
(virStorageVolDefFormat): Escape user-controlled strings.
(virStorageVolDefParseXML): Parse key, for use in unit tests.
* src/storage/storage_driver.c (storageVolCreateXML)
(storageVolCreateXMLFrom): Ensure parsed key doesn't confuse
volume creation.
* docs/schemas/basictypes.rng (volName): Relax definition.
* tests/storagepoolxml2xmltest.c (mymain): Test it.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/storagepoolxml2xmlin/pool-dir-naming.xml: New file.
* tests/storagepoolxml2xmlout/pool-dir-naming.xml: Likewise.
* tests/storagevolxml2xmlin/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-*.xml: Fix fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
It makes no sense to go forward to get the parent host number of a
HBA, and treat the HBA as a vHBA with trying to delete it.
Signed-off-by: Osier Yang <jyang@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/network/bridge_driver.c: Consistently use commas.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/storage/storage_backend_rbd.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
vol-clone reports out of memory error with disk type on ppc64.
Currently, wbytes is defined as size_t type (8 bytes), but
args's value in ioctl(fd, args..) in kernel is int (4 bytes).
This makes wbytes 2^32 times larger, causing an out of memory error.
This patch changes size_t to int to synchronize with kernel.
[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/block/ioctl.c?id=5e01dc7b#n363
[2] https://lkml.org/lkml/2013/11/1/620
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This gets rid of another stat() per volume, as well as cutting
bytes read in half, when populating the volumes of a directory
pool during a pool refresh. Not to mention that it provides an
interface that can let gluster pools also probe file types.
* src/util/virstoragefile.h (virStorageFileProbeFormatFromFD):
Delete.
(virStorageFileProbeFormatFromBuf): New prototype.
(VIR_STORAGE_MAX_HEADER): New constant, based on...
* src/util/virstoragefile.c (STORAGE_MAX_HEAD): ...old name.
(vmdk4GetBackingStore, virStorageFileGetMetadataInternal)
(virStorageFileProbeFormat): Adjust clients.
(virStorageFileProbeFormatFromFD): Delete.
(virStorageFileProbeFormatFromBuf): Export.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Adjust client.
* src/libvirt_private.syms (virstoragefile.h): Adjust exports.
Signed-off-by: Eric Blake <eblake@redhat.com>
We are calling fstat() at least twice per storage volume in
a directory storage pool; this is rather wasteful. Refactoring
this is also a step towards making code reusable for gluster,
where gluster can provide struct stat but cannot use fstat().
* src/storage/storage_backend.h
(virStorageBackendVolOpenCheckMode)
(virStorageBackendUpdateVolTargetInfoFD): Update signature.
* src/storage/storage_backend.c
(virStorageBackendVolOpenCheckMode): Pass stat results back.
(virStorageBackendUpdateVolTargetInfoFD): Use existing stats.
(virStorageBackendVolOpen, virStorageBackendUpdateVolTargetInfo):
Update callers.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSIUpdateVolTargetInfo): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathUpdateVolTargetInfo): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Using size_t counts will let us use VIR_APPEND_ELEMENT and friends.
* src/conf/storage_conf.h (_virStoragePoolObjList)
(_virStorageVolDefList): Track list sizes with size_t.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDRefreshPool): Fix type fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
The rbd code had a confusing typedef ending in Ptr that was not
actually a pointer, which made the rest of the code harder to
read. This fixes things to actually pass by pointer rather than
by copy.
* src/storage/storage_backend_rbd.c (virStorageBackendStatePtr):
Fix typedef.
(virStorageBackendRBDOpenRADOSConn)
(virStorageBackendRBDCloseRADOSConn)
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDRefreshPool, virStorageBackendRBDDeleteVol)
(virStorageBackendRBDCreateVol, virStorageBackendRBDRefreshVol)
(virStorageBackendRBDResizeVol): Fix fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This should resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=924672
For BZ 924672 the problem stems from the fact that thin pool logical
volume devices show up in /sbin/lvs output just like normal logical
volumes do. Libvirt incorrectly assumes they are just normal logical
volumes and that they will have a corresponding /dev/vgname/lvname
device that has been created by udev and tries to use this device.
To illustrate here is an example of the /dev/vgname/ directory and
the lvs output for a normal lv, thin lv, and thin pool:
LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert
lv vgguests -wi-a---- 1.00g
pool vgguests twi-a-tz- 11.00g 0.00
thinlv vgguests Vwi-a-tz- 1.00g pool 0.00
total 0
lrwxrwxrwx. 1 root root 7 Oct 8 19:35 lv -> ../dm-7
lrwxrwxrwx. 1 root root 7 Oct 8 19:37 thinlv -> ../dm-6
This patch modifies virStorageBackendLogicalMakeVol() to ignore thin pool
devices.
Commit id '532fef36' added a call to fallocate() and some error
handling based on whether or not the function existed. This new
call resulted in libvirt-cim/cimtest failures when attempting to
create a volume with "0" (zero) allocation value. The failure is
logged as:
Oct 9 07:51:33 localhost libvirtd[8030]: cannot allocate 0 bytes in
file '/var/lib/libvirt/images/cimtest-vol.img': Invalid argument
This can also be seen with virsh vol-create-as:
error: Failed to create vol test
error: cannot allocate 0 bytes in file '/home/vm-images/test': Invalid
argument
error: Failed to create vol test
error: cannot allocate 0 bytes in file '/home/vm-images/test': Invalid
argument
It turns out fallocate() will return EINVAL when the incoming 'len'
(or allocation) value is 0 (or less).
We currently have other error codes in singular form, e.g.
VIR_ERR_NETWORK_EXIST. Cleanup the previous patch to match the form.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I created a storage volume(eg: test) from a storage pool(eg:vg10) using
the following command:"virsh vol-create-as --pool vg10 --name test --capacity 300M."
When I re-executed the above command, the output was as the following:
"error: Failed to create vol test
error: Storage volume not found: storage vol 'test' already exists"
I think the output "Storage volume not found" is not appropriate. Because in fact storage
vol test has been found at this time. And then I think virErrorNumber should includes
VIR_ERR_STORAGE_EXIST which can also be used elsewhere. So I make this patch. The result
is as following:
"error: Failed to create vol test
error: storage volume 'test' exists already"
On RHEL 5, compilation fails with:
storage/storage_backend.c: In function 'createRawFile':
storage/storage_backend.c:339: warning: implicit declaration of function 'fallocate'
storage/storage_backend.c:339: warning: nested extern declaration of 'fallocate' [-Wnested-externs]
But:
$ grep HAVE_FALLOCATE config.h
/* #undef HAVE_FALLOCATE */
Huh? It turns out that in kernels that old, fallocate() is not
implemented (config.h is correct), but <linux/fs.h> defines
HAVE_FALLOCATE as an empty witness macro for a completely
different purpose. Since storage_backend.c is including
<linux/fs.h> on RHEL 5, we are hosed by the kernel definition.
Newer kernels no longer pollute the namespace, and it's fairly
easy to convert to an expression that works with both the old
kernel witness and the new-style config.h (undefined or 1).
Problem introduced in commit 532fef3.
* src/storage/storage_backend.c (createRawFile): Avoid namespace
pollution from kernel, by checking HAVE_FALLOCATE for a value.
Signed-off-by: Eric Blake <eblake@redhat.com>
Fixed the safezero call for allocating the rest of the file after cloning
an existing volume; it used to always use a zero offset, causing it to
only allocate the beginning of the file.
Also modified file creation to try to use fallocate(2) to pre-allocate
disk space before copying any data to make sure it fails early on if disk
is full and makes sure we can skip zero blocks when copying file contents.
If fallocate isn't available we will zero out the rest of the file after
cloning and only use sparse cloning if client requested a lower allocation
than the input volume's capacity.
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemu-img is going to switch the default for QCOW2
to QCOW2v3 (compat=1.1)
Extend the probing for qemu-img command line options to check
if -o compat is supported. If the volume definition specifies
the qcow2 format but no compat level and -o compat is supported,
specify -o compat=0.10 to create a QCOW2v2 image.
https://bugzilla.redhat.com/show_bug.cgi?id=997977
Introduced by commit e0139e3044. virStorageVolDefFree free'ed the
pointers that are still used by the added volume object, this changes
it back to VIR_FREE.
Each of the modules handled reporting error messages from the secret fetching
slightly differently with respect to the error. Provide a similar message
for each error case and provide as much data as possible.
One has to refresh the pool to get the correct pool info after
adding/removing/resizing a volume, this updates the pool metadata
(allocation, available) after those operation are done.
Add a privileged field to storageDriverState
Use the privileged value in order to generate a connection which could
be passed to the various storage backend drivers.
In particular, the iSCSI driver will need a connect in order to perform
pool authentication using the 'chap' secrets and the RBD driver utilizes
the connection during pool refresh for pools using 'ceph' secrets.
For now that connection will be to be to qemu driver until a mechanism
is devised to get a connection to just the secret driver without qemu.
Update virStorageBackendRBDOpenRADOSConn() to use the internal API to the
secret driver in order to get the secret value instead of the external
virSecretGetValue() path. Without the flag VIR_SECRET_GET_VALUE_INTERNAL_CALL
there is no way to get the value of private secret.
This also requires ensuring there is a connection which wasn't true for
for the refreshPool() path calls from storageDriverAutostart() prior to
adding support for the connection to a qemu driver. It seems calls to
virSecretLookupByUUIDString() and virSecretLookupByUsage() from the
refreshPool() path would have failed with no way to find the secret - that is
theoretically speaking since the 'conn' was NULL the failure would have been
"failed to find the secret".
Although the XML for CHAP authentication with plain "password"
was introduced long ago, the function was never implemented. This
patch replaces the login/password mechanism by following the
'ceph' (or RBD) model of using a 'username' with a 'secret' which
has the authentication information.
This patch performs the authentication during startPool() processing
of pools with an authType of VIR_STORAGE_POOL_AUTH_CHAP specified
for iSCSI pools.
There are two types of CHAP configurations supported for iSCSI
authentication:
* Initiator Authentication
Forward, one-way; The initiator is authenticated by the target.
* Target Authentication
Reverse, Bi-directional, mutual, two-way; The target is authenticated
by the initiator; This method also requires Initiator Authentication
This only supports the "Initiator Authentication". (I don't have any
enterprise iSCSI env for testing, only have a iSCSI target setup with
tgtd, which doesn't support "Target Authentication").
"Discovery authentication" is not supported by tgt yet too. So this only
setup the session authentication by executing 3 iscsiadm commands, E.g:
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.authmethod" -v "CHAP" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.username" -v "Jim" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.password" -v "Jimsecret" --op update
Not all RBD (Ceph) storage pools have cephx authentication turned on,
so "secret" might not be initialized.
It could also be that the secret couldn't be located.
Only call virSecretFree() if "secret" is initialized earlier.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When using logical pools, we had to trust the target->path provided.
This parameter, however, can be completely ommited and we can use
'/dev/<source.name>' safely and populate it to target.path.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=952973
The switch statement in 'virStorageBackendCreateQemuImgOpts' used the
for loop end condition 'VIR_STORAGE_FILE_FEATURE_LAST' as a possible value,
but since that cannot happen Coverity spits out a DEADCODE message. Adding
the Coverity tag just removes the Coverity message
Don't reuse the return value of virStorageBackendFileSystemIsMounted.
If it's 0, we'd return it even if the mount command failed.
Also, don't report another error if it's -1, since one has already
been reported.
Introduced by 258e06c.
https://bugzilla.redhat.com/show_bug.cgi?id=981251
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit id '53d5967c' introduced the following:
TEST: storagevolxml2argvtest
.............. 14 OK
==25636== 358 (264 direct, 94 indirect) bytes in 1 blocks are definitely lost in loss record 67 of 75
==25636== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25636== by 0x4C95791: virAlloc (viralloc.c:124)
==25636== by 0x4CA0BB4: virCommandNewArgs (vircommand.c:805)
==25636== by 0x4CA0C88: virCommandNew (vircommand.c:789)
==25636== by 0x408602: virStorageBackendCreateQemuImgCmd (storage_backend.c:849)
==25636== by 0x405427: testCompareXMLToArgvHelper (storagevolxml2argvtest.c:61)
==25636== by 0x4064DF: virtTestRun (testutils.c:158)
==25636== by 0x40516F: mymain (storagevolxml2argvtest.c:195)
==25636== by 0x406B1A: virtTestMain (testutils.c:722)
==25636== by 0x37C1021A04: (below main) (libc-start.c:225)
==25636==
PASS: storagevolxml2argvtest
When creating a virtual FC HBA with virsh/libvirt API, an error message
will be returned: "error: Node device not found",
also the 'nodedev-dumpxml' shows wrong information of wwpn & wwnn
for the new created device.
Signed-off-by: xschen@tnsoft.com.cn
This reverts f90af69 which switched wwpn & wwwn in the wrong place.
https://www.kernel.org/doc/Documentation/scsi/scsi_fc_transport.txt
It's not used anywhere except for the switch in
virStorageBackendCreateQemuImgOpts, where leaving it in causes
a dead code coverity warning and omitting it breaks compilation
because of unhandled enum value.
Introduced by 6298f74.
Add <features> and <compat> elements to volume target XML.
<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.
<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
iscsiadm now supports specifying hostnames in the portal argument [1]
Instead of resolving the hostname to a single IPv4 address, pass the
hostname to isciadm, allowing IPv6 targets to work.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=624437
Setting of local variables in virStorageBackendCreateQemuImgCmd was
unnecessarily cluttered with ternary operators and repeated testing of
of conditions.
This patch refactors the function to use if statements and improves
error reporting in case inputvol is specified but does not contain
target path. Previously we would complain about "unknown storage vol
type 0" instead of the actual problem.
As the document for "virsh-resize" says:
<...>
Attempts to shrink the volume will fail unless I<--shrink> is present;
</...>
This makes sense as it at least prevent the user shrinking the important
data of volume without a notice.
The document for "vol-resize" says the new capacity will be sparse
unless "--allocate" is specified, however, the "--allocate" flag
is never implemented. This implements the "--allocate" flag for
fs backend's raw type volume, based on posix_fallocate and the
syscall SYS_fallocate.
qemu-img resize will fail with "The new size must be a multiple of 512"
if libvirt doesn't round it first.
This fixes rhbz#951495
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=851411https://bugzilla.redhat.com/show_bug.cgi?id=955500
The first problem was that virFileOpenAs was returning fd (-1) in one
of the error cases rather than ret (-errno), so the caller thought
that the error was EPERM rather than ENOENT.
The second problem was that some log messages in the general purpose
qemuOpenFile() function would always say "Failed to create" even if
the caller hadn't included O_CREAT (i.e. they were trying to open an
existing file).
This fixes virFileOpenAs to jump down to the error return (which
returns ret instead of fd) in the previously mentioned incorrect
failure case of virFileOpenAs(), removes all error logging from
virFileOpenAs() (since the callers report it), and modifies
qemuOpenFile to appropriately use "open" or "create" in its log
messages.
NB: I seriously considered removing logging from all callers of
virFileOpenAs(), but there is at least one case where the caller
doesn't want virFileOpenAs() to log any errors, because it's just
going to try again (qemuOpenFile()). We can't simply make a silent
variation of virFileOpenAs() though, because qemuOpenFile() can't make
the decision about whether or not it wants to retry until after
virFileOpenAs() has already returned an error code.
Likewise, I also considered changing virFileOpenAs() to return -1 with
errno set on return, and may still do that, but only as a separate
patch, as it obscures the intent of this patch too much.
If the volume is of a clustered volume group, and not active, the
related pool APIs fails on opening /dev/vg/lv. If the volume is
suspended, it hangs on open(2) the volume.
Though the best solution is to expose the volume status in volume
XML, and even better to provide API to activate/deactivate the volume,
but it's not the work I want to touch currently. Volume status in
other status is just fine to skip.
About the 5th field of lv_attr (from man lvs[8])
<quote>
5 State: (a)ctive, (s)uspended, (I)nvalid snapshot, invalid
(S)uspended snapshot, snapshot (m)erge failed,suspended
snapshot (M)erge failed, mapped (d)evice present without
tables, mapped device present with (i)nactive table
</quote>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
POSIX says that both basename() and dirname() may return static
storage (aka they need not be thread-safe); and that they may but
not must modify their input argument. Furthermore, <libgen.h>
is not available on all platforms. For these reasons, you should
never use these functions in a multi-threaded library.
Gnulib instead recommends a way to avoid the portability nightmare:
gnulib's "dirname.h" provides useful thread-safe counterparts. The
obvious dir_name() and base_name() are GPL (because they malloc(),
but call exit() on failure) so we can't use them; but the LGPL
variants mdir_name() (malloc's or returns NULL) and last_component
(always points into the incoming string without modifying it,
differing from basename semantics only on corner cases like the
empty string that we shouldn't be hitting in the first place) are
already in use in libvirt. This finishes the swap over to the safe
functions.
* cfg.mk (sc_prohibit_libgen): New rule.
* src/util/vircgroup.c: Fix offenders.
* src/parallels/parallels_storage.c (parallelsPoolAddByDomain):
Likewise.
* src/parallels/parallels_network.c (parallelsGetBridgedNetInfo):
Likewise.
* src/node_device/node_device_udev.c (udevProcessSCSIHost)
(udevProcessSCSIDevice): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.
* src/util/virpci.c (virPCIGetDeviceAddressFromSysfsLink):
Likewise.
* src/util/virstoragefile.h (_virStorageFileMetadata): Avoid false
positive.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
libvirt/HACKING suggests omitting braces with a
single-line body; this patch fixes the coding style
problem for the Sheepdog storage backend driver.
Signed-off-by: Harry Wei <harryxiyou@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This finds the parent for vHBA by iterating over all the HBA
which supports vport_ops capability on the host, and return
the first one which is online, not saturated (vports in use
is less than max_vports).
startPool creates the vHBA if it's not existed yet, stopPool destroys
the vHBA. Also to support autostart, checkPool will creates the vHBA
if it's not existed yet.
The helper iterates over sysfs, to find out the matched scsi host
name by comparing the wwnn,wwpn pair. It will be used by checkPool
and refreshPool of storage scsi backend. New helper getAdapterName
is introduced in storage_backend_scsi.c, which uses the new util
helper virGetFCHostNameByWWN to get the fc_host adapter name.
node device driver names the HBA like "scsi_host5", but storage
driver uses "host5", which could make the user confused. This
changes them to be consistent. However, for back-compat reason,
adapter name like "host5" is still supported.
This introduces 4 new attributes for storage pool source adapter.
E.g.
<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.
* docs/formatstorage.html.in:
- Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
- Add RNG schema
* src/conf/storage_conf.c:
- Parse and format the new XMLs
* src/conf/storage_conf.h:
- New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
- New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
- Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
- Replace "adapter" with "adapter.data.name", which is member of the union
of the new struct virStoragePoolSourceAdapter now. Later patch will
add the checking, as "adapter.data.name" is only valid for "scsi_host"
adapter.
* src/storage/storage_backend_scsi.c:
- Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
- New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
- Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
- New test
* tests/storagepoolxml2xmltest.c:
- Include the test
There are a number of places which generate cast alignment
warnings, which are difficult or impossible to address. Use
pragmas to disable the warnings in these few places
conf/nwfilter_conf.c: In function 'virNWFilterRuleDetailsParse':
conf/nwfilter_conf.c:1806:16: warning: cast increases required alignment of target type [-Wcast-align]
item = (nwItemDesc *)((char *)nwf + att[idx].dataIdx);
conf/nwfilter_conf.c: In function 'virNWFilterRuleDefDetailsFormat':
conf/nwfilter_conf.c:3238:16: warning: cast increases required alignment of target type [-Wcast-align]
item = (nwItemDesc *)((char *)def + att[i].dataIdx);
storage/storage_backend_mpath.c: In function 'virStorageBackendCreateVols':
storage/storage_backend_mpath.c:247:17: warning: cast increases required alignment of target type [-Wcast-align]
names = (struct dm_names *)(((char *)names) + next);
nwfilter/nwfilter_dhcpsnoop.c: In function 'virNWFilterSnoopDHCPDecode':
nwfilter/nwfilter_dhcpsnoop.c:994:15: warning: cast increases required alignment of target type [-Wcast-align]
pip = (struct iphdr *) pep->eh_data;
nwfilter/nwfilter_dhcpsnoop.c:1004:11: warning: cast increases required alignment of target type [-Wcast-align]
pup = (struct udphdr *) ((char *) pip + (pip->ihl << 2));
nwfilter/nwfilter_learnipaddr.c: In function 'procDHCPOpts':
nwfilter/nwfilter_learnipaddr.c:327:33: warning: cast increases required alignment of target type [-Wcast-align]
uint32_t *tmp = (uint32_t *)&dhcpopt->value;
nwfilter/nwfilter_learnipaddr.c: In function 'learnIPAddressThread':
nwfilter/nwfilter_learnipaddr.c:501:43: warning: cast increases required alignment of target type [-Wcast-align]
struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:538:43: warning: cast increases required alignment of target type [-Wcast-align]
struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:544:48: warning: cast increases required alignment of target type [-Wcast-align]
struct udphdr *udphdr= (struct udphdr *)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When creating a logical volume with virStorageVolCreateXMLFrom,
"qemu-img convert" is called internally if clonevol is a file volume.
Then, vol->target.format is used as output_fmt parameter but the
target.format of logical volumes is always 0 because logical volumes
haven't the volume format type element.
Fortunately, 0 was treated as RAW file format before commit f772b3d9,
so there was no problem. But now, 0 is treated as the type of none,
qemu-img fails with "Unknown file format 'none'".
This patch fixes this issue by treating output block devices as RAW
file format like for input block devices.
Signed-off-by: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
When logical pool has no PVs associated with itself (user-created),
virCommandFree(cmd) is called twice with the same pointer and that
causes a segfault in daemon.
virStorageBackendRBDRefreshPool() first allocates an array big enough
to hold 1024 names, then calls rbd_list(), which returns ERANGE if the
array isn't big enough. When that happens, the VIR_ALLOC_N is called
again with a larger size. Unfortunately, the original array isn't
freed before allocating a new one.
This patch plugs two memory leaks, removes some useless and confusing
constructs and renames renames "cleanup" label as "error" since it is
only used for error path rather then being common for both success and
error paths.
uid_t and gid_t are opaque types, ranging from s32 to u32 to u64.
Explicitly cast the magic -1 to the appropriate type.
Signed-off-by: Philipp Hahn <hahn@univention.de>
uid_t and gid_t are opaque types, ranging from s32 to u32 to u64.
Explicitly cast them to unsigned int for printing.
Signed-off-by: Philipp Hahn <hahn@univention.de>
For really old qemu-img binaries which do not support specifying
the format of the backing file, display a DEBUG message instead of
INFO that this can't be done.
The bfree and blocks fields are supposed to be in units of frsize. We were
calculating capacity correctly using those units, but the available
calculation was using bsize instead. Most file systems report these as the
same value specifically because many programs are buggy, but that is no
reason to rely on that behavior, or to behave inconsistently.
This bug has been present since e266ded (2008) and aa296e6c, when the code
was originally introduced (the latter via cut and paste).
Signed-off-by: Sage Weil <sage@newdream.net>
No need to use HAVE_REGEX_H - our use of gnulib guarantees that
the header exists and works, regardless of platform. Similarly,
we can unconditionally assume a compiling <sys/wait.h> (although
the mingw version of this header is not full-featured).
* src/storage/storage_backend.c: Drop useless conditional.
* tests/testutils.c: Likewise.
The local redefinition of PED_PARTITION_PROTECTED results in the error
but is not a problem especially if the built code doesn't have the latest
definitions.
When virStorageBackendLogicalCreateVol() creates a snapshot for a
logical volume with backingStore element, it fails with the message
below:
2013-01-17 03:10:18.869+0000: 1967: error : virCommandWait:2345 :
internal error Child process (/sbin/lvcreate --name lvm-snapshot -L 51200K
-s=/dev/lvm-pool/lvm-volume) unexpected exit status 3: /sbin/lvcreate:
invalid option -- '=' Error during parsing of command line.
This is because virCommandAddArgPair() uses '=' to connect the two
parameters, it's unsuitable for -s option of the lvcreate.
Signed-off-by: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Commit-id 'afc4631b' added the regfree(reg) to free resources alloc'd
during regcomp; however, reg still needed to be VIR_FREE()'d. The call
to regfree() also didn't account for possible NULL value. Reformatted
the call to be closer to usage.
Add VIR_STORAGE_VOL_CREATE_PREALLOC_METADATA flag to virStorageVolCreateXML
and virStorageVolCreateXMLFrom. This flag requests metadata
preallocation when creating/cloning qcow2 images, resulting in creating
a sparse file with qcow2 metadata. It has only slightly larger disk usage
compared to new image with no allocation, but offers higher performance.
https://bugzilla.redhat.com/show_bug.cgi?id=832302
It's odd to fall through to buildVol, and the existed file is
removed when buildVol fails. This checks if the volume target
path already exists in createVol. The reason for not using
error like "Volume already exists" is that there isn't volume
maintained by libvirt for the path until a operation like
pool-refresh, using error like that will just cause confusion.
Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The only important state that should prevent libvirtd shutdown
is from running VMs. Networks, host devices, network filters
and storage pools are all long lived resources that have no
significant in-memory state. They should not block shutdown.
Fix the null pointer access when UUID is not specified.
Introduce a bool 'uuidUsable' to virStoragePoolAuthCephx that indicates
if uuid was specified or not and use it instead of the pointless
comparison of the static UUID array to NULL.
Add an error message if both uuid and usage are specified.
Fixes:
Error: FORWARD_NULL (CWE-476):
libvirt-0.10.2/src/conf/storage_conf.c:461: var_deref_model: Passing
null pointer "uuid" to function "virUUIDParse(char const *, unsigned
char *)", which dereferences it. (The dereference is assumed on the
basis of the 'nonnull' parameter attribute.)
Error: NO_EFFECT (CWE-398):
libvirt-0.10.2/src/conf/storage_conf.c:979: array_null: Comparing an
array to null is not useful: "src->auth.cephx.secret.uuid != NULL".
The virStateInitialize method and several cgroups methods were
using an 'int privileged' parameter or similar for dual-state
values. These are better represented with the bool type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This will simplify the refactoring of the ESX storage driver to support
a VMFS and an iSCSI backend.
One of the tasks the storage driver needs to do is to decide which backend
driver needs to be invoked for a given request. This approach extends
virStoragePool and virStorageVol to store extra parameters:
1. privateData: stores pointer to respective backend storage driver.
2. privateDataFreeFunc: stores cleanup function pointer.
virGetStoragePool and virGetStorageVol are modfied to accept these extra
parameters as user params. virStoragePoolDispose and virStorageVolDispose
checks for cleanup operation if available.
The private data pointer allows the ESX storage driver to store a pointer
to the used backend with each storage pool and volume. This avoids the need
to detect the correct backend in each storage driver function call.
Commit 258e06c removed setting of the volume type to
VIR_STORAGE_VOL_BLOCK, which leads to failures in
storageVolumeCreateXMLFrom.
The type (and target.format) of the volume was set to zero. In
virStorageBackendGetBuildVolFromFunction, this gets interpreted as
VIR_STORAGE_FILE_NONE and the qemu-img tool is called with unknown
"none" format.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=879780
Regression introduced by commit 258e06c85b, "ret" could be set to 1
or 0 by virStorageBackendFileSystemIsMounted before goto cleanup.
This could mislead the callers (up to the public API
virStoragePoolDestroy) to return success even the underlying umount
command fails.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rename the 'wait' parameter to 'loop'.
This silences the warning:
storage/storage_backend.c:1348:34: error: declaration of 'wait' shadows
a global declaration [-Werror=shadow]
and fixes the build with -Werror.
--
Note: loop is pool backwards.
virStorageVolLookupByPath is an API call that virt-manager uses
quite a bit when dealing with storage. This call use BackendStablePath
which has several usleep() heuristics that can be tripped up
and hang virt-manager for a while.
Current example: an empty mpath pool pointing to /dev/mapper makes
_any_ calls to virStorageVolLookupByPath take 5 seconds.
The sleep heuristics are actually only needed in certain cases
when we are waiting for new storage to appear, so let's skip the
timeout steps when calling from LookupByPath.
Yet another instance of where using plain open() mishandles files
that live on root-squash NFS, and where improving the API can
improve the chance of a successful probe.
* src/util/storage_file.h (virStorageFileProbeFormat): Alter
signature.
* src/util/storage_file.c (virStorageFileProbeFormat): Use better
method for opening file.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Update caller.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
Requiring pre-allocation was an unusual idiom. It allowed iteration
over the backing chain to use fewer mallocs, but made one-shot
clients harder to read. Also, this makes it easier for a future
patch to move away from opening fds on every iteration over the chain.
* src/util/storage_file.h (virStorageFileGetMetadataFromFD): Alter
signature.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Allocate
return value.
(virStorageFileGetMetadata): Update clients.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
Backing chains can end on a network protocol, such as nbd:xxx; we
should not attempt to probe the file system in this case.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Only probe files.
On F17 at least, this command fails:
$ sudo /usr/sbin/lvcreate --name sparsetest -L 0K --virtualsize 16384K vgvirt
Unable to create new logical volume with no extents
Which is unfortunate since allocation=0 is what virt-manager tries to use
by default.
Rather than telling the user 'don't do that', let's just give them the
smallest allocation possible if alloc=0 is requested.
https://bugzilla.redhat.com/show_bug.cgi?id=866481
We are currently able to work only with non-translated SELinux
contexts, but we are using functions that work with translated
contexts throughout the code. This patch swaps all SELinux context
translation relative calls with their raw sisters to avoid parsing
problems.
The problems can be experienced with mcstrans for example. The
difference is that if you have translations enabled (yum install
mcstrans; service mcstrans start), fgetfilecon_raw() will get you
something like 'system_u:object_r:virt_image_t:s0', whereas
fgetfilecon() will return 'system_u:object_r:virt_image_t:SystemLow'
that we cannot parse.
I was trying to confirm that the _raw variants were here since the dawn of
time, but the only thing I see now is that it was imported together in
the upstream repo [1] from svn, so before 2008.
Thanks Laurent Bigonville for finding this out.
[1] http://oss.tresys.com/git/selinux.git
Done with:
sed -i -e "s/no pool with matching uuid/no storage pool with matching uuid/g" src/storage/storage_driver.c
sed -i -e 's/"%s", _("no storage pool with matching uuid")/_("no storage pool with matching uuid %s"), obj->uuid/g' src/storage/storage_driver.c
sed -i -e 's/"%s", _("storage pool is not active")/_("storage pool '%s' is not active"), pool->def->name/g' src/storage/storage_driver.c
And a couple fixups before, during, and after, and a manual inspection
pass to make sure nothing was wonky.
It might need some time till the LUN's stable path shows up on
initiator host, and although the time window is not foreseeable,
as a better than nothing fix, this patch adds timeout for the
stable path discovery process.
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Otherwise, in locations like virobject.c where PROBE is used,
for certain configure options, the compiler warns:
util/virobject.c:110:1: error: 'intptr_t' undeclared (first use in this function)
As long as we are making this header always available, we can
clean up several other files.
* src/internal.h (includes): Pull in <stdint.h>.
* src/conf/nwfilter_conf.h: Rely on internal.h.
* src/storage/storage_backend.c: Likewise.
* src/storage/storage_backend.h: Likewise.
* src/util/cgroup.c: Likewise.
* src/util/sexpr.h: Likewise.
* src/util/virhashcode.h: Likewise.
* src/util/virnetdevvportprofile.h: Likewise.
* src/util/virnetlink.h: Likewise.
* src/util/virrandom.h: Likewise.
* src/vbox/vbox_driver.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/xenapi/xenapi_utils.c: Likewise.
* src/xenapi/xenapi_utils.h: Likewise.
* src/xenxs/xenxs_private.h: Likewise.
* tests/storagebackendsheepdogtest.c: Likewise.
This converts the following public API datatypes to use the
virObject infrastructure:
virConnectPtr
virDomainPtr
virDomainSnapshotPtr
virInterfacePtr
virNetworkPtr
virNodeDevicePtr
virNWFilterPtr
virSecretPtr
virStreamPtr
virStorageVolPtr
virStoragePoolPtr
The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.
* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/storage/storage_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
to use virObjectUnref/virObjectRef
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The access, birth, modification and change times are added to
storage volumes and corresponding xml representations. This
shows up in the XML in this format:
<timestamps>
<atime>1341933637.027319099</atime>
<mtime>1341933637.027319099</mtime>
</timestamps>
Signed-off-by: Eric Blake <eblake@redhat.com>
The option 'srcSpec' to virsh command find-storage-pool-sources
is optional for logical type of storage pool, but mandatory for
netfs and iscsi type.
When missing the option for netfs and iscsi, libvirt reports XML
parsing error due to null string option srcSpec.
before
error: Failed to find any netfs pool sources
error: (storage_source_specification):1: Document is empty
(null)
after:
error: pool type 'iscsi' requires option --srcSpec for source discovery
Any time we have a string with no % passed through gettext, a
translator can inject a % to cause a stack overread. When there
is nothing to format, it's easier to ask for a string that cannot
be used as a formatter, by using a trivial "%s" format instead.
In the past, we have used --disable-nls to catch some of the
offenders, but that doesn't get run very often, and many more
uses have crept in. Syntax check to the rescue!
The syntax check can catch uses such as
virReportError(code,
_("split "
"string"));
by using a sed script to fold context lines into one pattern
space before checking for a string without %.
This patch is just mechanical insertion of %s; there are probably
several messages touched by this patch where we would be better
off giving the user more information than a fixed string.
* cfg.mk (sc_prohibit_diagnostic_without_format): New rule.
* src/datatypes.c (virUnrefConnect, virGetDomain)
(virUnrefDomain, virGetNetwork, virUnrefNetwork, virGetInterface)
(virUnrefInterface, virGetStoragePool, virUnrefStoragePool)
(virGetStorageVol, virUnrefStorageVol, virGetNodeDevice)
(virGetSecret, virUnrefSecret, virGetNWFilter, virUnrefNWFilter)
(virGetDomainSnapshot, virUnrefDomainSnapshot): Add %s wrapper.
* src/lxc/lxc_driver.c (lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Likewise.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML)
(virDomainDiskDefParseXML, virDomainGraphicsDefParseXML):
Likewise.
* src/conf/network_conf.c (virNetworkDNSHostsDefParseXML)
(virNetworkDefParseXML): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterIsValidChainName):
Likewise.
* src/conf/nwfilter_params.c (virNWFilterVarValueCreateSimple)
(virNWFilterVarAccessParse): Likewise.
* src/libvirt.c (virDomainSave, virDomainSaveFlags)
(virDomainRestore, virDomainRestoreFlags)
(virDomainSaveImageGetXMLDesc, virDomainSaveImageDefineXML)
(virDomainCoreDump, virDomainGetXMLDesc)
(virDomainMigrateVersion1, virDomainMigrateVersion2)
(virDomainMigrateVersion3, virDomainMigrate, virDomainMigrate2)
(virStreamSendAll, virStreamRecvAll)
(virDomainSnapshotGetXMLDesc): Likewise.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel)
(virNWFilterDHCPSnoopReq): Likewise.
* src/openvz/openvz_driver.c (openvzUpdateDevice): Likewise.
* src/openvz/openvz_util.c (openvzKBPerPages): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Likewise.
* src/qemu/qemu_command.c (qemuBuildHubDevStr, qemuBuildChrChardevStr)
(qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/rpc/virnetsaslcontext.c (virNetSASLSessionGetIdentity):
Likewise.
* src/rpc/virnetsocket.c (virNetSocketNewConnectUNIX)
(virNetSocketSendFD, virNetSocketRecvFD): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskBuildPool): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemProbe)
(virStorageBackendFileSystemBuild): Likewise.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDOpenRADOSConn): Likewise.
* src/storage/storage_driver.c (storageVolumeResize): Likewise.
* src/test/test_driver.c (testInterfaceChangeBegin)
(testInterfaceChangeCommit, testInterfaceChangeRollback):
Likewise.
* src/vbox/vbox_tmpl.c (vboxListAllDomains): Likewise.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk, xenFormatSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetUUID, xenFormatXMDisk)
(xenFormatXM): Likewise.
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Update the storage driver to use virReportError instead of
the virStorageReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When passing a const message string to the error reporting APIs
RBD forgot to use "%s" to avoid GCC format string warnings
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When calling 'lvcreate' if specifying both the '-L' and
'--virtualsize' options, the latter will be treated as
the capacity and the former as the allocation. This can
be used to support sparse volume creation. In addition,
when listing volumes it is necessary to include the 'size'
field in lvs output, so that we can detect sparse volume
allocation correctly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To make it easier to dynamically change the command line ARGV,
switch all storage code over to use virCommandPtr APIs for
running programs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Fix the virStorageBackendFileSystemVolDelete method to not use
unlink() unconditionally. It must use rmdir() for volumes which
are directories. It should also raise an error if given a volume
which has the network/block type.
Commit 122fa379de introduces option to
store more than one host entry in a storage pool source definition. That
commit causes a regression, where a check is added that only one host
entry should be present (that actualy is not present as the source
structure was just allocated and zeroed) instead of allocating memory
for the host entry.
As the storage pool sources are stored in a list of structs, the pointer
returned by virStoragePoolSourceListNewSource() shouldn't be freed as it
points in the middle of a memory block. This combined with a regression
that takes the error path every time on caused a double-free abort on
the src struct in question.
mnt_fsname can not be the same, as we check the duplicate pool
sources earlier before, means it can't be the same pool, moreover,
a pool can't be started if it's already active anyway. So no reason
to act as success.
We used to prefix 'rbd:' to volume names, this is not necessary.
Qemu takes RBD devices in this way, like: qemu -drive rbd:pool/image
When attaching a network disk like RBD to a guest we however do not use this prefix.
Currently you can't map a RBD volume name directly to a domain without removing the prefix.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
Currently, we share the idea of old & new def with domains. Users can
*-edit an object (domain, pool) which spawns a new internal
representation for them. This is referenced via
{domainObj,poolObj}->newDef [compared to ->def]. However, for pool we
were never overwriting def with newDef. This must be done on
pool-destroy (like we do analogically in domain detroy).
The comment says:
/* Now create the final dir in the path with the uid/gid/mode
* requested in the config. If the dir already exists, just set
* the perms.
*/
However, virDirCreate is only invoked if the target path doesn't
exist yet (which is opposite with the comment), or the uid from
the config is not -1 (I don't understand why, think it's just
another mistake). And the result is the perms of the pool won't
be changed if one tries to build the pool with different perms
again.
Besides these logic error fix, if no uid and gid are specified in
the config, the practical used uid, gid are reflected.
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory
These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove a number of pointless checks against PATH_MAX and
add a syntax-check rule to prevent its use in future
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
The previous storage patch missed an instance affected by the struct
member rename. It also had some botched whitespace detected by
'make check'.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Adjust to new struct.
* src/conf/storage_conf.c (virStoragePoolSourceFormat): Fix
indentation.
The current storage pools for NFS and iSCSI only require one host to
connect to. Future storage pools like RBD and Sheepdog will require
multiple hosts.
This patch allows multiple source hosts and rewrites the current
storage drivers.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
lvcreate want's the parent pool's name, not the pool path
lvchange and lvremove want lv specified as $vgname/$lvname
This largely worked before because these commands strip off a
starting /dev. But https://bugzilla.redhat.com/show_bug.cgi?id=714986
is from a user using a 'nested VG' that was having problems.
I couldn't find any info on nested LVM and the reporter never responded,
but I reproduced with XML that specified a valid source name, and
set target path to a symlink.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Lets say I got a volume with '1G' allocation and '10G' capacity. The
available space in the parent pool is '5G'. With the current check for
overcapacity, I can only try to resize to <= '6G'. You see the problem?
Currently, if scrub (used for wiping algorithms) is not present
at compile time, we don't support any other wiping algorithms than
zeroing, even if it was installed later. Switch to runtime detection
instead.
Input to the volume cloning code is a source volume and an XML
descriptor for the new volume. It is possible for the new volume
to have a greater size than source volume, at which point libvirt
will just stick 0s on the end of the new image (for raw format
anyways).
Unfortunately a logic error messed up our tracking of the of the
excess amount that needed to be written: end result is that sparse
clones were made very much non-sparse, and cloning regular disk
images could end up excessively sized (though data unaltered).
Drop the 'remain' variable entriely here since it's redundant, and
track actual allocation directly against the desired 'total'.
virFileOpenAs previously would only try opening a file as the current
user, or as a different user, but wouldn't try both methods in a
single call. This made it cumbersome to use as a replacement for
open(2). Additionally, it had a lot of historical baggage that led to
it being difficult to understand.
This patch refactors virFileOpenAs in the following ways:
* reorganize the code so that everything dealing with both the parent
and child sides of the "fork+setuid+setgid+open" method are in a
separate function. This makes the public function easier to understand.
* Allow a single call to virFileOpenAs() to first attempt the open as
the current user, and if that fails to automatically re-try after
doing fork+setuid (if deemed appropriate, i.e. errno indicates it
would now be successful, and the file is on a networkFS). This makes
it possible (in many, but possibly not all, cases) to drop-in
virFileOpenAs() as a replacement for open(2).
(NB: currently qemuOpenFile() calls virFileOpenAs() twice, once
without forking, then again with forking. That unfortunately can't
be changed without at least some discussion of the ramifications,
because the requested file permissions are different in each case,
which is something that a single call to virFileOpenAs() can't deal
with.)
* Add a flag so that any fchown() of the file to a different uid:gid
is explicitly requested when the function is called, rather than it
being implied by the presence of the O_CREAT flag. This just makes
for less subtle surprises to consumers. (Commit
b1643dc15c added the check for O_CREAT
before forcing ownership. This patch just makes that restriction
more explicit.)
* If either the uid or gid is specified as "-1", virFileOpenAs will
interpret this to mean "the current [gu]id".
All current consumers of virFileOpenAs should retain their present
behavior (after a few minor changes to their setup code and
arguments).
The old virRandom() API was not generating good random numbers.
Replace it with a new API virRandomBits which instead of being
told the upper limit, gets told the number of bits of randomness
required.
* src/util/virrandom.c, src/util/virrandom.h: Add virRandomBits,
and move virRandomInitialize
* src/util/util.h, src/util/util.c: Delete virRandom and
virRandomInitialize
* src/libvirt.c, src/security/security_selinux.c,
src/test/test_driver.c, src/util/iohelper.c: Update for
changes from virRandom to virRandomBits
* src/storage/storage_backend_iscsi.c: Remove bogus call
to virRandomInitialize & convert to virRandomBits
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
On F16 at least, empty volume groups don't have a directory under /dev.
The directory only appears once a logical volume is created.
This tickles some behavior in BackendStablePath which ends with
libvirt sleeping for 5 seconds while waiting for the directory to appear.
This causes all sorts of problems for the virStorageVolLookupByPath API
which virtinst uses, even if trying to resolve a path that is independent
of the logical pool.
In reality we don't even need to do that checking since logical pools
always have a stable target path. Short circuit the polling in that
case.
Fixes bug 782261
If the vol object is newly created, it increases the volumes count,
but doesn't decrease the volumes count when do cleanup. It can
cause libvirtd to crash when one trying to free the volume objects
like:
for (i = 0; i < pool->volumes.count; i++)
virStorageVolDefFree(pool->volumes.objs[i]);
It's more reliable if we add the newly created vol object in the
end.
Current "-ay | -an" has problems on pool starting/refreshing if
the volumes are clustered. Rommer has posted a patch to list 2
months ago.
https://www.redhat.com/archives/libvir-list/2011-October/msg01116.html
But IMO we shouldn't skip the inactived vols. So this is a squashed
patch by Rommer.
Signed-off-by: Rommer <rommer@active.by>
https://bugzilla.redhat.com/show_bug.cgi?id=648855 mentioned a
misuse of 'an' where 'a' is proper; that has since been fixed,
but a search found other problems (some were a spelling error for
'and', while most were fixed by 'a').
* daemon/stream.c: Fix grammar.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_event.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/esx/esx_vi.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* src/rpc/virnetserverprogram.c: Likewise.
* src/storage/storage_backend_fs.c: Likewise.
* src/util/conf.c: Likewise.
* src/util/dnsmasq.c: Likewise.
* src/util/iptables.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* tools/virsh.c: Likewise.
This partly reverts my previous patch f88de3eb. We need to
get file status after open, as given path could have been symlink,
so fstat() will operate on different file than lstat().
virStorageBackendLogicalDeleteVol() could not remove the lv with error
"could not remove open logical volume" sometimes. Generally it's caused
by the volume is still active, even if lvremove tries to remove it with
option "--force".
This patch is to fix it by disbale the lv first using "lvchange -aln"
and "lvremove -f" afterwards if the direct "lvremove -f" failed.
lvs outputs "[$lvname_vorigin]" for the virtual snapshot lv
(created with "--virtualsize"), and the original device pointed
by "$lvname_vorigin" is just for lvm internal use, one should
never use it.
Per lvm's nameing rules, "[" is not valid as part of the vg/lv name.
(man 8 lvm).
<quote>
VALID NAMES
The following characters are valid for VG and LV names: a-z A-Z 0-9 + _
. -
VG and LV names cannot begin with a hyphen. There are also various
reserved names that are used internally by lvm that can not be used as
LV or VG names. A VG cannot be called anything that exists in /dev/ at
the time of creation, nor can it be called '.' or '..'. A LV cannot be
called '.' '..' 'snapshot' or 'pvmove'. The LV name may also not con‐
tain the strings '_mlog' or '_mimage'
</quote>
So we can skip the set the lv's backingStore by checking if the name
begins with a "[".
which would blow away all volumes. Honor VIR_STORAGE_POOL_BUILD_OVERWRITE
to force a rebuild.
This was caught by libvirt-tck's storage/110-disk-pool.t.
Detected by Coverity. Only possible if qemu-img gives bogus output,
but we might as well be robust.
* src/storage/storage_backend.c
(virStorageBackendQEMUImgBackingFormat): Check for strstr failure.
Splitting into two functions allows the user to call the right
function, rather than having to remember that a *Free function is
an exception to the rule.
* src/conf/storage_conf.h (virStoragePoolSourceClear): New function.
* src/libvirt_private.syms (storage_conf.h): Export it.
* src/conf/storage_conf.c (virStoragePoolSourceFree): Split...
(virStoragePoolSourceClear): ...into new function.
(virStoragePoolDefFree, virStoragePoolDefParseSourceString):
Update callers.
* src/test/test_driver.c (testStorageFindPoolSources): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemNetFindPoolSourcesFunc)
(virStorageBackendFileSystemNetFindPoolSources): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalFindPoolSources): Likewise.
Detected by Coverity. virStoragePoolSourceFree does not free the
actual passed-in pointer. A bigger patch would be to rename it
virStoragePoolSourceClear to match behavior, or even split it into
two functions depending on needed behavior; but this is the minimal
fix to the one location out of eight that leaked memory.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Free memory.
* src/storage/storage_backend_logical.c:
If a logical vol is created as striped. (e.g. --stripes 3),
the "device" field of lvs output will have multiple fileds which are
seperated by comma. Thus the RE we write in the codes will not
work well anymore. E.g. (lvs output for a stripped vol, uses "#" as
seperator here):
test_stripes##fSLSZH-zAS2-yAIb-n4mV-Al9u-HA3V-oo9K1B#\
/dev/sdc1(10240),/dev/sdd1(0)#42949672960#4194304
The RE we use:
const char *regexes[] = {
"^\\s*(\\S+),(\\S*),(\\S+),(\\S+)\\((\\S+)\\),(\\S+),([0-9]+),?\\s*$"
};
Also the RE doesn't match the "devices" field of striped vol properly,
it contains multiple "device path" and "offset".
This patch mainly does:
1) Change the seperator into "#"
2) Change the RE for "devices" field from "(\\S+)\\((\\S+)\\)"
into "(\\S+)".
3) Add two new options for lvs command, (segtype, stripes)
4) Extend the RE to match the value for the two new fields.
5) Parse the "devices" field seperately in virStorageBackendLogicalMakeVol,
multiple "extents" info are generated if the vol is striped. The
number of "extents" is equal to the stripes number of the striped vol.
A incidental fix: (virStorageBackendLogicalMakeVol)
Free "vol" if it's new created and there is error.
Demo on striped vol with the patch applied:
% virsh vol-dumpxml /dev/test_vg/vol_striped2
<volume>
<name>vol_striped2</name>
<key>QuWqmn-kIkZ-IATt-67rc-OWEP-1PHX-Cl2ICs</key>
<source>
<device path='/dev/sda5'>
<extent start='79691776' end='88080384'/>
</device>
<device path='/dev/sda6'>
<extent start='62914560' end='71303168'/>
</device>
</source>
<capacity>8388608</capacity>
<allocation>8388608</allocation>
<target>
<path>/dev/test_vg/vol_striped2</path>
<permissions>
<mode>0660</mode>
<owner>0</owner>
<group>6</group>
<label>system_u:object_r:fixed_disk_device_t:s0</label>
</permissions>
</target>
</volume>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=727474
If the regexes supported (?:pvs)?, then we could handle this by
optionally matching but not returning the initial command name. But it
doesn't. So add a new char* argument to
virStorageBackendRunProgRegex(). If that argument is NULL then we act
as usual. Otherwise, if the string at that argument is found at the
start of a returned line, we drop that before running the regex.
With this patch, virt-manager shows me lvs with command_names 1 or 0.
The definitions of PVS_BASE etc may want to be moved into the configure
scripts (though given how PVS is found, IIUC that could only happen if
pvs was a link to pvs_real), but in any case no sense dealing with that
until we're sure this is an ok way to handle it.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
* src/storage/storage_driver.c: As virStorageVolLookupByPath lookups
all the pool objs of the drivers, breaking when failing on getting
the stable path of the pool will just breaks the whole lookup process,
it can cause the API fails even if the vol exists indeed. It won't get
any benefit. This patch is to fix it.
Related #BZ: https://bugzilla.redhat.com/show_bug.cgi?id=702260.
There are two problems described in the BZ:
1) "Can't remove open logical volume".
2) "Unable to deactivate logical volume "foo""
This patch just intends to fix 2), as 1) is expected if the vol
is still used by something, and you never known if "lvchange -an"
will fail or not either (sometime, it will succeed, sometimes not).
We'd better not look for trouble, :-)
For 2), that's caused by race between lvremove and udev event handling,
the only workable way now is to wait the events handling are finished,
though it might introduce latencies, as "udevadmin settle" exits
after *all* events are handled, it's the only way we can fix
the racing in libvirt layer.
See https://bugzilla.redhat.com/show_bug.cgi?id=570359 for more
details.
Mac OS X 10.6. Snow Leopard and probably other do not provide a mkfs
command to create filesystems. Macro MKFS then remained undefined and
did not provide any substitute, so that build failed on a missing
argument.
Struct virStoragePoolProbeResult was compiled in conditionaly, but
virStorageBackendFileSystemProbe used it unconditionaly. This patch
exempts the struct from conditional include.
Fix bug #611823 storage driver should prohibit pools with duplicate
underlying storage.
Add internal API virStoragePoolSourceFindDuplicate() to do uniqueness
check based on source location infomation for pool type.
* AUTHORS: add Lei Li
This patch adds the ability to make the filesystem for a filesystem
pool during a pool build.
The patch adds two new flags, no overwrite and overwrite, to control
when mkfs gets executed. By default, the patch preserves the
current behavior, i.e., if no flags are specified, pool build on a
filesystem pool only makes the directory on which the filesystem
will be mounted.
If the no overwrite flag is specified, the target device is checked
to determine if a filesystem of the type specified in the pool is
present. If a filesystem of that type is already present, mkfs is
not executed and the build call returns an error. Otherwise, mkfs
is executed and any data present on the device is overwritten.
If the overwrite flag is specified, mkfs is always executed, and any
existing data on the target device is overwritten unconditionally.
Parted does not report disk size in 512 byte units, but
rather the disks' logical sector size, which with modern
drives might be 4k.
* src/storage/parthelper.c: Remove hardcoded 512 byte sector
size
Although we are flushing cache after some critical writes (e.g.
volume creation), after some others we do not (e.g. volume cloning).
This patch fix this issue. That is for volume cloning, writing
header of logical volume, and storage wipe.
Revert 6a1f5f568f. Now that libvirt_iohelper takes fds by
inheritance rather than by open() (commit 1eb66479), there is
no longer a race where the parent can unlink() a file prior to
the iohelper open()ing the same file. From there, it makes
more sense to have the callers both create and unlink, rather
than the caller create and the stream unlink, since the latter
was only needed when iohelper had to do the unlink.
* src/fdstream.h (virFDStreamOpenFile, virFDStreamCreateFile):
Callers are responsible for deletion.
* src/fdstream.c (virFDStreamOpenFileInternal): Don't leak created
file on failure.
(virFDStreamOpenFile, virFDStreamCreateFile): Drop parameter.
* src/lxc/lxc_driver.c (lxcDomainOpenConsole): Update callers.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemuDomainOpenConsole): Likewise.
* src/storage/storage_driver.c (storageVolumeDownload)
(storageVolumeUpload): Likewise.
* src/uml/uml_driver.c (umlDomainOpenConsole): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
Many volume operations will fail if the volume in question is being
allocated. These operations were returning VIR_ERR_INTERNAL_ERROR
when they should be returning VIR_ERR_OPERATION_INVALID.
Getting metadata on storage allocates a memory (path) which need to
be freed after use otherwise it gets leaked. This means after use of
virStorageFileGetMetadataFromFD or virStorageFileGetMetadata one
must call virStorageFileFreeMetadata to free it. This function frees
structure internals and structure itself.
No caller was using the flags argument, and this function is internal
only, so we might as well skip it.
* src/util/util.h (safezero): Update signature.
* src/util/util.c (safezero): Update function.
* src/locking/lock_driver_sanlock.c
(virLockManagerSanlockSetupLockspace)
(virLockManagerSanlockCreateLease): Update all callers.
* src/storage/storage_backend.c (createRawFile): Likewise.
Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.
Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.
virStorageBackendCreateRaw: createRawFile already reported the
exact error.
Before the fix:
error: Failed to create vol vol-create.img
error: cannot create path '/var/lib/libvirt/images/vol-create.img': Unknown error 18446744073709551597
After the fix:
error: Failed to create vol vol-create.img
error: cannot fill file '/var/lib/libvirt/images/vol-create.img': No space left on device
Coverity detected that we could crash on bogus input. Meanwhile,
strtok_r is rather heavy compared to strchr.
* src/storage/storage_backend_iscsi.c (virStorageBackendIQNFound):
Check for parse failure, and use lighter-weight functions.
volDelete used to return VIR_ERR_INTERNAL_ERROR when attempting to
delete a volume which was still being allocated. It should return
VIR_ERR_OPERATION_INVALID.
* src/storage/storage_driver.c: Fix return of volDelete.
Most of the safezero() implementations return -1 on error,
setting errno. The safezero() impl using posix_fallocate()
though returned a positive errno value on error (due to
the unusual API contract of posix_fallocate() compared to
most syscall APIs).
* src/util/util.c: Ensure safezero() returns -1 and sets
errno on error.
* src/storage/storage_backend.c: Change safezero != 0 to
< 0 for detecting errors
Seems reasonable to have all command wrappers in the same place
v2:
Dont move SetInherit
v3:
Comment spelling fix
Adjust WARN0 comment
Remove spurious #include movement
Don't include sys/types.h
Combine virExec enums
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Coverity detected that options was being set by strdup but never
freed. But why even bother with an options variable? The options
parameter never changes! Leak present since commit 44948f5b (0.7.0).
This function could probably be rewritten to take better advantage
of virCommand, but that is more invasive.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemMount): Avoid wasted strdup, and
guarantee proper cleanup on all paths.
Since directories can be used for <filesystem> passthrough, they are
basically storage volumes.
v2:
Skip ., .., lost+found dirs
v3:
Use gnulib last_component
v4:
Use gnulib "dirname.h", not system <dirname.h>
Don't skip lost+found
Two additional places need initgroups call to properly work in an
environment where the UID is allowed to open/create stuff through its
supplementary groups.
virRunWithHook is now unused, so we can drop it. Tested w/ raw + qcow2
volume creation and copying.
v2:
Use opaque data to skip hook second time around
Simply command building
v3:
Drop explicit FindFileInPath
This is needed if we want to transfer a temporary file. If the
transfer is done with iohelper, we might run into a race condition,
where we unlink() file before iohelper is executed.
* src/fdstream.c, src/fdstream.h,
src/util/iohelper.c: Add new option
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
src/storage/storage_driver.c, src/uml/uml_driver.c,
src/xen/xen_driver.c: Expand existing function calls
We were 31/73 on whether to translate; since less than 50% translated
and since VIR_INFO is less than VIR_WARN which also doesn't translate,
this makes sense.
* cfg.mk (sc_prohibit_gettext_markup): Add VIR_INFO, since it
falls between WARN and DEBUG.
* daemon/libvirtd.c (qemudDispatchSignalEvent, remoteCheckAccess)
(qemudDispatchServer): Adjust offenders.
* daemon/remote.c (remoteDispatchAuthPolkit): Likewise.
* src/network/bridge_driver.c (networkReloadIptablesRules)
(networkStartNetworkDaemon, networkShutdownNetworkDaemon)
(networkCreate, networkDefine, networkUndefine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainDefine)
(qemudDomainUndefine): Likewise.
* src/storage/storage_driver.c (storagePoolCreate)
(storagePoolDefine, storagePoolUndefine, storagePoolStart)
(storagePoolDestroy, storagePoolDelete, storageVolumeCreateXML)
(storageVolumeCreateXMLFrom, storageVolumeDelete): Likewise.
* src/util/bridge.c (brProbeVnetHdr): Likewise.
* po/POTFILES.in: Drop src/util/bridge.c.
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This matches the public API and helps to get rid of some special
case code in the remote generator.
Rename driver API functions and XDR protocol structs.
No functional change included outside of the remote generator.
clang didn't like the last increment to nargs. But why even
track nargs ourselves, when virCommand does it for us?
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIConnection): Switch to virCommand to avoid
a dead-store warning on nargs.
The SCSI volumes get a better 'key' field based on the fully
qualified volume path. All SCSI volumes have a unique serial
available in hardware which can be obtained by sending a
suitable SCSI command. Call out to udev's 'scsi_id' command
to fetch this value
* src/storage/storage_backend_scsi.c: Improve volume key
field value stability and uniqueness
This patch enables the relative backing file path support provided by
qemu-img create.
If a relative path is specified for the backing file, it is converted
to an absolute path using the storage pool path. The absolute path is
used to verify that the backing file exists. If the backing file exists,
the relative path is allowed and will be provided to qemu-img create.
Even with -Wuninitialized (which is part of autobuild.sh
--enable-compile-warnings=error), gcc does NOT catch this
use of an uninitialized variable:
{
if (cond)
goto error;
int a = 1;
error:
printf("%d", a);
}
which prints 0 (supposing the stack started life wiped) if
cond was true. Clang will catch it, but we don't use clang
as often. Using gcc -Wjump-misses-init catches it, but also
gives false positives:
{
if (cond)
goto error;
int a = 1;
return a;
error:
return 0;
}
Here, a was never used in the scope of the error block, so
declaring it after goto is technically fine (and clang agrees).
However, given that our HACKING already documents a preference
to C89 decl-before-statement, the false positive warning is
enough of a prod to comply with HACKING.
[Personally, I'd _really_ rather use C99 decl-after-statement
to minimize scope, but until gcc can efficiently and reliably
catch scoping and uninitialized usage bugs, I'll settle with
the compromise of enforcing a coding standard that happens to
reject false positives if it can also detect real bugs.]
* acinclude.m4 (LIBVIRT_COMPILE_WARNINGS): Add -Wjump-misses-init.
* src/util/util.c (__virExec): Adjust offenders.
* src/conf/domain_conf.c (virDomainTimerDefParseXML): Likewise.
* src/remote/remote_driver.c (doRemoteOpen): Likewise.
* src/phyp/phyp_driver.c (phypGetLparNAME, phypGetLparProfile)
(phypGetVIOSFreeSCSIAdapter, phypVolumeGetKey)
(phypGetStoragePoolDevice)
(phypVolumeGetPhysicalVolumeByStoragePool)
(phypVolumeGetPath): Likewise.
* src/vbox/vbox_tmpl.c (vboxNetworkUndefineDestroy)
(vboxNetworkCreate, vboxNetworkDumpXML)
(vboxNetworkDefineCreateXML): Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject)
(xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/security/security_selinux.c (SELinuxGenNewContext):
Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia):
Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetPtyPaths):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainShutdown)
(qemudDomainBlockStats, qemudDomainMemoryPeek): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendCreateIfaceIQN): Likewise.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
Currently libvirt's default logging is limited and it is difficult to
determine what was happening when a proglem occurred (especially on a
machines where one don't know the detail.) This patch helps to do that
by making additional logging available for the following events:
creating/defining/undefining domains
creating/defining/undefining/starting/stopping networks
creating/defining/undefining/starting/stopping storage pools
creating/defining/undefining/starting/stopping storage volumes.
* AUTHORS: add Naoya Horiguchi
* src/network/bridge_driver.c src/qemu/qemu_driver.c
src/storage/storage_driver.c: provide more VIR_INFO logging
New APIs are added allowing streaming of content to/from
storage volumes.
* include/libvirt/libvirt.h.in: Add virStorageVolUpload and
virStorageVolDownload APIs
* src/driver.h, src/libvirt.c, src/libvirt_public.syms: Stub
code for new APIs
* src/storage/storage_driver.c, src/esx/esx_storage_driver.c:
Add dummy entries in driver table for new APIs
This patch intentionally doesn't change indentation, in order to
make it easier to review the real changes.
* src/util/util.h (VIR_FILE_OP_RETURN_FD, virFileOperationHook):
Delete.
(virFileOperation): Rename...
(virFileOpenAs): ...and reduce parameters.
* src/util/util.c (virFileOperationNoFork, virFileOperation):
Rename and simplify.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Adjust caller.
* src/storage/storage_backend.c (virStorageBackendCreateRaw):
Likewise.
* src/libvirt_private.syms: Reflect rename.
Child processes don't always reach _exit(); if they die from a
signal, then any messages should still be accurate. Most users
either expect a 0 status (thankfully, if status==0, then
WIFEXITED(status) is true and WEXITSTATUS(status)==0 for all
known platforms) or were filtering on WIFEXITED before printing
a status, but a few were missing this check. Additionally,
nwfilter_ebiptables_driver was making an assumption that works
on Linux (where WEXITSTATUS shifts and WTERMSIG just masks)
but fails on other platforms (where WEXITSTATUS just masks and
WTERMSIG shifts).
* src/util/command.h (virCommandTranslateStatus): New helper.
* src/libvirt_private.syms (command.h): Export it.
* src/util/command.c (virCommandTranslateStatus): New function.
(virCommandWait): Use it to also diagnose status from signals.
* src/security/security_apparmor.c (load_profile): Likewise.
* src/storage/storage_backend.c
(virStorageBackendQEMUImgBackingFormat): Likewise.
* src/util/util.c (virExecDaemonize, virRunWithHook)
(virFileOperation, virDirCreate): Likewise.
* daemon/remote.c (remoteDispatchAuthPolkit): Likewise.
* src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesExecCLI):
Likewise.
Currently a single storage volume with a broken backing file will disable the
whole storage pool. This can happen when the backing file is on some
unavailable network storage or if the backing volume is deleted, while the
storage volumes using it remain.
Since the storage pool can not be re-activated, re-creating the missing
or deleting the now useless volumes using libvirt only is not possible.
Fixing this is a little bit tricky:
1. virStorageBackendProbeTarget() only detects the missing backing file,
if the backing file format is not explicitly specified. If the
backing file is created using
kvm-img create -f qcow2 -o backing_fmt=qcow2,backing_file=... ...
no error is detected at this stage.
The new return code -3 signals that the backing file could not be
opened.
2. The backingStore.format must be >= 0, since values < 0 would break
virStorageVolTargetDefFormat() when dumping the XML data such as
<format type='...'/>
Because of this the format is faked as VIR_STORAGE_FILE_RAW.
3. virStorageBackendUpdateVolTargetInfo() always opens the backing file
and thus always detects a missing backing file.
Since it "only" updates the capacity, allocation, owner, group, mode
and SELinux label, just ignore errors at this stage, print an error
message and continue.
4. Using vol-dump on a broken volume still doesn't work, but at least
vol-destroy and pool-refresh do work now.
To reproduce:
dir=$(mktemp -d)
virsh pool-create-as tmp dir '' '' '' '' "$dir"
virsh vol-create-as --format qcow2 tmp back 1G
virsh vol-create-as --format qcow2 --backing-vol-format qcow2 --backing-vol back tmp cow 1G
virsh vol-delete --pool tmp back
virsh pool-refresh tmp
After the last step, the pool will be gone (because it was not persistent). As
long as the now broken image stays in the directory, you will not be able to
re-create or re-start the pool.
Signed-off-by: Philipp Hahn <hahn@univention.de>
For newer qemu-img, the help string for "backing file format" is
"[-F backing_fmt]".
Fix the wrong logic error by commit e997c268.
* src/storage/storage_backend.c
virRun gives pretty useful error output, let's not overwrite it unless there
is a good reason. Some places were providing more information about what
the commands were _attempting_ to do, however that's usually less useful from
a debugging POV than what actually happened.
Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'
followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.
* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
The name convention of device mapper disk is different, and 'parted'
can't be used to delete a device mapper disk partition. e.g.
Name Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1
Error: Expecting a partition number.
This patch introduces 'dmsetup' to fix it.
Changes:
- New function "virIsDevMapperDevice" in "src/utils/utils.c"
- remove "is_dm_device" in "src/storage/parthelper.c", use
"virIsDevMapperDevice" instead.
- Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in"
- Check "dmsetup" in 'configure.ac' for "with-storage-disk"
- Changes on "src/Makefile.am" to link against libdevmapper
- New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms"
Changes from v1 to v3:
- s/virIsDeviceMapperDevice/virIsDevMapperDevice/g
- replace "virRun" with "virCommand"
- sort the list of util functions in "libvirt_private.syms"
- ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration.
e.g.
Name Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1
Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted
Name Path
-----------------------------------------
The SCSI storage backend leaks a string containing the pathname
for each block device it discovers
* src/storage/storage_backend_scsi.c: Free the device name
"virStorageBackendCreateVols":
"names->next" serves as condition expression for "do...while",
however, "names" was shifted before, it then results in one less
loop, and thus, one less volume will be created for mpath pool,
the patch is to fix it.
* src/storage/storage_backend_mpath.c
Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.
This extends the round up fix in 6002e0406c
to the whole codebase.
Instead of reporting errors for odd values in the VMX code round them up.
Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.
Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.
If vol->capacity is odd, the capacity will be rounded down
by devision, this patch is to round it up instead of rounding
down, to be safer in case of one writes to the volume with the
size he used to create.
- src/storage/storage_backend_logical.c: make sure size is not rounded down
If there is a dangling symbolic link in filesystem pool, the pool
will fail to start or refresh, this patch is to fix it by ignoring
it with a warning log.
* .gnulib: Update to latest, for at least a stdint.h fix
* src/storage/storage_driver.c (storageVolumeZeroSparseFile)
(storageWipeExtent): Use better type, although it still triggers
spurious -Wformat warning on MacOS's gcc.
security_context_t happens to be a typedef for char*, and happens to
begin with a string usable as a raw context string. But in reality,
it is an opaque type that may or may not have additional information
after the first NUL byte, where that additional information can
include pointers that can only be freed via freecon().
Proof is from this valgrind run of daemon/libvirtd:
==6028== 839,169 (40 direct, 839,129 indirect) bytes in 1 blocks are definitely lost in loss record 274 of 274
==6028== at 0x4A0515D: malloc (vg_replace_malloc.c:195)
==6028== by 0x3022E0D48C: selabel_open (label.c:165)
==6028== by 0x3022E11646: matchpathcon_init_prefix (matchpathcon.c:296)
==6028== by 0x3022E1190D: matchpathcon (matchpathcon.c:317)
==6028== by 0x4F9D842: SELinuxRestoreSecurityFileLabel (security_selinux.c:382)
800k is a lot of memory to be leaking.
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD): Avoid leak on error.
* src/security/security_selinux.c
(SELinuxReserveSecurityLabel, SELinuxGetSecurityProcessLabel)
(SELinuxRestoreSecurityFileLabel): Use correct function to free
security_context_t.
The SCSI volumes currently get a name like '17:0:0:1' based
on $host:$bus:$target:$lun. The names are intended to be unique
per pool and stable across pool restarts. The inclusion of the
$host component breaks this, because the $host number for iSCSI
pools is dynamically allocated by the kernel at time of login.
This changes the name to be 'unit:0:0:1', ie removes the leading
host component. The 'unit:' prefix is just to ensure the volume
name doesn't start with a number and make it clearer when seen
out of context.
* src/storage/storage_backend_scsi.c: Improve volume name
field value stability and uniqueness
Many operations are not valid on inactive storage pools. The
storage driver is currently returning VIR_ERR_INTERNAL_ERROR
in these cases, rather than the more suitable error code
VIR_ERR_OPERATION_INVALID
* src/storage/storage_driver.c: Fix error code when pool
is not active
