Running 'make check' can sometimes fail in the gnulib/tests
subdirectory, when doing an incremental build, because
./bootstrap generates a Makefile.am that tries to refer to
../../.. instead of ../.., and gets lost.
This may be an upstream gnulib bug, where a more elegant
solution will present itself in the future:
http://thread.gmane.org/gmane.comp.lib.gnulib.bugs/24898
But in the meantime, I was able to reproduce both the issue,
and this solution to work around it.
* bootstrap.conf (bootstrap_epilogue): Ensure that no stray
../../.. components remain in gnulib/tests/Makefile.in.
Reported by Serge Hallyn.
In QEMU, the card itself is a PCI device, but it requires a codec
(either -device hda-output or -device hda-duplex) to actually output
sound. Specifying <sound model='ich6'/> gives us -device intel-hda
-device hda-duplex I think it's important that a simple <sound model='ich6'/>
sets up a useful codec, to have consistent behavior with all other sound cards.
This is basically Dan's proposal of
<sound model='ich6'>
<codec type='output' slot='0'/>
<codec type='duplex' slot='3'/>
</sound>
without the codec bits implemented.
The important thing is to keep a consistent API here, we don't want some
<sound> devs require tweaking codecs but not others. Steps I see to
accomplishing this:
- every <sound> device has a <codec type='default'/> (unless codecs are
manually specified)
- <codec type='none'/> is required to specify 'no codecs'
- new audio settings like mic=on|off could then be exposed in
<sound> or <codec> in a consistent manner for all sound models
v2:
Use model='ich6'
v3:
Use feature detection, from eblake
Set codec id, bus, and cad values
v4:
intel-hda isn't supported if -device isn't available
v5:
Comment spelling fixes
This bug has been present since before the time that commit
f8a519 (Dec 2008) tried to make the dispatch loop re-entrant.
Dereferencing eventLoop.handles outside the lock risks crashing, since
any other thread could have reallocated the array in the meantime.
It's a narrow race window, however, and one that would have most
likely resulted in passing bogus data to the callback rather than
actually causing a segv, which is probably why it has gone undetected
this long.
* daemon/event.c (virEventDispatchHandles): Cache data while
inside the lock, as the array might be reallocated once outside.
If vnc_auto_unix_socket is enabled, any VNC devices without a hardcoded
listen or socket value will be setup to serve over a unix socket in
/var/lib/libvirt/qemu/$vmname.vnc.
We store the generated socket path in the transient VM definition at
CLI build time.
QEMU supports serving VNC over a unix domain socket rather than traditional
TCP host/port. This is specified with:
<graphics type='vnc' socket='/foo/bar/baz'/>
This provides better security access control than VNC listening on
127.0.0.1, but will cause issues with tools that rely on the lax security
(virt-manager in fedora runs as regular user by default, and wouldn't be
able to access a socket owned by 'qemu' or 'root').
Also not currently supported by any clients, though I have patches for
virt-manager, and virt-viewer should be simple to update.
v2:
schema: Make listen vs. socket a <choice>
This will allow us to record transient runtime state in vm->def, like
default VNC parameters. Accomplish this by adding an extra 'live' parameter
to SetDefTransient, with similar semantics to the 'live' flag for
AssignDef.
https://bugzilla.redhat.com/show_bug.cgi?id=562743
Also, fixes gnulib bug in dealing with strerror_r from glibc 2.13.
* .gnulib: Update to latest, for improved bootstrap.
* bootstrap: Resync from gnulib.
* autogen.sh (bootstrap): Add --bootstrap-sync, to make it easier
to keep bootstrap up-to-date. Pass optional --no-git through.
Reported by Aleksey Avdeev.
When restoring a saved qemu instance via JSON monitor, the vm is
left in a paused state. Turns out the 'cont' cmd was failing with
"MigrationExpected" error class and "An incoming migration is
expected before this command can be executed" error description
due to migration (restore) not yet complete.
Detect if 'cont' cmd fails with "MigrationExpecte" error class and
retry 'cont' cmd.
V2: Fix potential double-free noted by Laine Stump
Report VIR_ERR_CONFIG_UNSUPPORTED instead of VIR_ERR_INTERNAL_ERROR,
as it's valid in our domain schema, just unsupported by hypervisor
here.
* src/qemu/qemu_command.c
The code which set VNC passwords correctly had fallback for
the set_password command, but was lacking it for the
expire_password command. This made it impossible to start
a guest. It also failed to check whether QEMU was still
running after the initial 'set_password' command completed
* src/qemu/qemu_hotplug.c: Fix error handling when
password expiry fails
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Fix
return code for missing expire_password command
Avoid overwriting the real error message with a generic
OOM failure message, when machine type probe fails
* src/qemu/qemu_driver.c: Don't overwrite error
If the XML security model is NULL, it is assumed that the current
model will be used with dynamic labelling. The verify step is
meaningless and potentially crashes if dereferencing NULL
* src/security/security_manager.c: Skip NULL model on verify
The function virUnrefConnect() may call virReleaseConnect() to release
the dest connection, and the function virReleaseConnect() will call
conn->driver->close().
So the function virUnrefConnect() should be surrounded by
qemuDomainObjEnterRemoteWithDriver() and
qemuDomainObjExitRemoteWithDriver() to prevent possible deadlock between
two communicating libvirt daemons.
See commit f0c8e1cb37 for further details.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
In some circumstances, libvirtd would issue two STOPPED events after it
stopped a domain. This was because an EOF event can arrive after a qemu
process is killed but before qemuMonitorClose() is called.
qemuHandleMonitorEOF() should ignore EOF when the domain is not running.
I wasn't able to reproduce this bug directly, only after adding an
artificial sleep() into qemudShutdownVMDaemon().
A large number of return values used 'return (0)' instead
of simply 'return 0'. Remove all these redundant brackets
so the style is consistent throughout the file
* src/libvirt.c: Remove redundant brackets
The driver table only has 10 slots, but there are potentially
11 drivers that need activating. Improve the error message
when driver registration fails
* src/libvirt.c: Increase driver table size & improve errors
The virLibConnError() function (and related ones) do not correctly
report line number info. Turn them all into macros so line numbers
are reported correctly. Drop the connection object in all of them
since it is no longer used.
Also from the virLibConnWarning() equivalents completely. Now
that the Xen driver is running 100% inside libvirtd, those
codepaths for secondary drivers cannot be reached.
* src/libvirt.c: Replace error functions with macros
* .gnulib: Update to latest, for sigpipe and sigaction modules.
* bootstrap.conf (gnulib_modules): Add siaction, sigpipe, strerror_r.
* tools/virsh.c (vshSetupSignals) [!SIGPIPE]: Delete, now that
gnulib guarantees it.
(SA_SIGINFO): Define for mingw fallback.
* src/util/virterror.c (virStrerror): Simplify, now that gnulib
guarantees the POSIX interface.
* configure.ac (AC_CHECK_FUNCS_ONCE): Drop redundant check.
(AM_PROG_CC_STDC): Move earlier, to keep autoconf happy.
The public object is called NWFilter but the corresponding private
object is called NWFilterPool. I don't see compelling reasons for this
Pool suffix. One might argue that an NWFilter is a "pool" of rules, etc.
Remove the Pool suffix from NWFilterPool. No functional change included.
Fixes regression introduced in commit 2211518, where all qemu 0.12.x
fails to start, as does qemu 0.13.x lacking the pci-assign device.
Prior to 2211518, the code was just ignoring a non-zero exit status
from the qemu child, but the virCommand code checked this to avoid
masking any other issues, which means the real bug of provoking
non-zero exit status has been latent for a longer time.
* src/qemu/qemu_capabilities.c (qemuCapsExtractVersionInfo): Check
for -device driver,? support.
(qemuCapsExtractDeviceStr): Avoid failure if all probed devices
are unsupported.
Reported by Ken Congyang.
https://bugzilla.redhat.com/show_bug.cgi?id=620363
When using -incoming stdio or -incoming exec:, qemu keeps the
stdin fd open long after the migration is complete. Not to
mention that exec:cat is horribly inefficient, by doubling the
I/O and going through a popen interface in qemu.
The new -incoming fd: of qemu 0.12.0 closes the fd after using
it, and allows us to bypass an intermediary cat process for
less I/O.
* src/qemu/qemu_command.h (qemuBuildCommandLine): Add parameter.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Support
migration via fd: when possible. Consolidate migration handling
into one spot, now that it is more complex.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Update caller.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.args: New file.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.xml: Likewise.
Currently, boot order can be specified per device class but there is no
way to specify exact disk/NIC device to boot from.
This patch adds <boot order='N'/> element which can be used inside
<disk/> and <interface/>. This is incompatible with the older os/boot
element. Since not all hypervisors support per-device boot
specification, new deviceboot flag is included in capabilities XML for
hypervisors which understand the new boot element. Presence of the flag
allows (but doesn't require) users to use the new style boot order
specification.
* tools/libvirt-guests.init.in: Rename...
* tools/libvirt-guests.init.sh: ...so that xgettext's language
detection via suffix will work.
* po/POTFILES.in: Update all references.
* tools/Makefile.am (EXTRA_DIST, libvirt-guests.init): Likewise.
* tools/libvirt-guests.init.sh: Use only POSIX shell features, which
includes using gettext.sh for translation rather than $"".
* tools/Makefile.am (libvirt-guests.init): Supply a few more substitutions.
* po/POTFILES.in: Mark that libvirt-guests.init needs translation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Before the security driver was refactored in d6623003 seclabeltest and
secaatest were basically the same. seclabeltest was meant for SELinux
and secaatest for AppArmor. Both tests exited early when the specific
security driver backend wasn't enabled.
With the new security manager trying to initialize a disabled security
driver backend is an error that can't be distinguished from other errors
anymore. Therefore, the updated seclabeltest just asks for the first
available backend as this will always work even with SELinux and AppArmor
backend being disabled due to the new Nop backend.
Remove the obsolete secaatest and compile and run the seclabeltest
unconditional.
This fixes make check on systems that support AppArmor.
Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: Justin Clift <jclift@redhat.com>
