by rewriting it completely from:
error: unsupported configuration: virtio only support device address
type 'PCI'
to:
error: unsupported configuration: virtio disk cannot have an address of type
drive
Since we now support CCW addresses as well.
(cherry picked from commit 68545ea629)
While debugging the support for responding to qemu RX_FILTER_CHANGED
events, I had changed the "ignoring this event" log message from
VIR_DEBUG to VIR_WARN, but forgot to change it back before
pushing. Since many guest OSes make enough changes to multicast lists
and/or promiscuous mode settings to trigger this message, it's
starting to show up as a red herring in bug reports.
(cherry picked from commit dae3e24663)
Commit 5bba61f changed the XPath strings to be absolute when parsing
the VM NUMA configuration. Unfortunately the <domain> element is not a
top level element when parsing the domain status XML thus the absolute
XPath string doesn't match.
Use the relative string so that the <numa> settings are not lost.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
(cherry picked from commit d75e23bbfb)
Commit cf54c60699 introduced the ability
to create missing storage volumes during migration. For network disks,
however, we may not necessarily be able to detect whether they already
exist -- there is no straight-forward way to map the disk to a storage
volume, and even if there were it's possible no configured storage pool
actually contains the disk.
It is better to assume the network disk exists in this case, rather than
aborting the migration completely. If the volume really is missing, QEMU
will generate an appropriate error later in the migration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
(cherry picked from commit a1b1805155)
https://bugzilla.redhat.com/show_bug.cgi?id=1196934
When qemu exits during startup, libvirt includes the error from
/var/log/libvirt/qemu/vm.log in the error message:
$ virsh start test3
error: Failed to start domain test3
error: internal error: early end of file from monitor: possible problem:
2015-02-27T03:03:16.985494Z qemu-kvm: -numa memdev is not supported by
machine rhel6.5.0
The check for domain liveness added to qemuDomainObjExitMonitor
in commit dc2fd51f sometimes overwrites this error:
$ virsh start test3
error: Failed to start domain test3
error: operation failed: domain is no longer running
Fix the check to only report an error if there is none set.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
(cherry picked from commit 4f06820938)
When converting domXML from native, the libxl driver was overwriting
useful errors from the xenconfig parsing code with a useless, generic
error. E.g. "internal error: parsing xm config failed" vs
"internal error: config value usbdevice was malformed". Remove the
redundant (and useless) error reporting in the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
(cherry picked from commit bd235cd873)
Investigation of a problem with creating passthrough macvtap devices
(https://bugzilla.redhat.com/show_bug.cgi?id=1185501) has shown that
this slightly more verbose failure message is useful. In particular,
the mac address can be used to determine the domain. You could also
figure this out by looking at preceding messages in a debug log, but
this gets it in a single place.
(cherry picked from commit 72423df992)
Only selected fields from the disk source were copied when cold updating
source in a CDROM drive. When such drive was backed by a network file
this resulted into corruption of the definition:
<disk type='network' device='cdrom'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='gluster' name='gluster-vol1(null)'>
<host name='localhost'/>
</source>
<target dev='vdc' bus='virtio'/>
<readonly/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</disk>
Update the whole source instead of cherry-picking elements.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166024
(cherry picked from commit d0dc6c0369)
We interpret port values as signed int (convert them from char *),
so if a negative value is provided in network disk's configuration,
we accept it as valid, however there's an 'unknown cause' error raised later.
This error is only accidental because we return the port value in the return code.
This patch adds just a minor tweak to the already existing check so we
reject negative values the same way as we reject non-numerical strings.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1163553
(cherry picked from commit 8464616526)
Commit f182da20 (v1.2.6) caused a slight regression in virsh
reporting of a non-active block job; where it used to state
"Commit complete", it now states "Now in synchronized phase".
But the synchronized phase is only possible for an active commit.
For a reproducer, I created a chain 'a <- b <- c <- d <- e' and
ran virsh blockcommit $dom vda --top c --base a --verbose --wait
* tools/virsh-domain.c (cmdBlockCommit): Synchronized phase is
only possible on active commits.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit ceec58ac9e)
Introduced by f6a2f97e
Problem Description:
After multiple times of migrating a domain, which has an ovs interface with no portData set,
with non-shared disk, nbd ports got overflowed.
The steps to reproduce the problem:
1 define and start a domain with its network configured as:
<interface type='bridge'>
<source bridge='br0'/>
<virtualport type='openvswitch'>
</virtualport>
<model type='virtio'/>
<driver name='vhost' queues='4'/>
</interface>
2 do not set the network's portData.
3 migrate(ToURI2) it with flag 91(1011011), which means:
VIR_MIGRATE_LIVE
VIR_MIGRATE_PEER2PEER
VIR_MIGRATE_PERSIST_DEST
VIR_MIGRATE_UNDEFINE_SOURCE
VIR_MIGRATE_NON_SHARED_DISK
4 migrate success, but we got an error log in libvirtd.log:
error : virCommandWait:2423 : internal error: Child process (ovs-vsctl --timeout=5 get Interface
vnet1 external_ids:PortData) unexpected exit status 1: ovs-vsctl: no key "PortData" in Interface
record "vnet1" column external_ids
5 migrate it back, migrate it , migrate it back, .......
6 nbd port got overflowed.
The reasons for the problem is :
1 virNetDevOpenvswitchGetMigrateData() takes it as wrong if no portData is available for the ovs
interface of a domain. (We think it's not appropriate, as portData is just OPTIONAL)
2 in func qemuMigrationBakeCookie(), it fails in qemuMigrationCookieAddNetwork(), and returns with -1.
qemuMigrationCookieAddNBD() is not called thereafter, and mig->nbd is still NULL.
3 However, qemuMigrationRun() just *WARN* if qemuMigrationBakeCookie() fails, migration still successes.
cookie is NULL, it's not baked on the src side.
4 On the destination side, it would alloc a port first and then free the nbd port in COOKIE.
But the cookie is NULL due to qemuMigrationCookieAddNetwork() failure at src side. thus the nbd port
is not freed.
In this patch, we add "--if-exists" option to make ovs-vsctl not raise error if there's no portData available.
Further more, because portData may be NULL in the cookie at the dest side, check it before setting portData.
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
(cherry picked from commit 25df57db73)
The version attribute in redirdev filters refers to the revision
of the device, not the version of the USB protocol.
Explicitly state that this is not the USB protocol and remove references
to those round version numbers that resemble USB protocol versions.
https://bugzilla.redhat.com/show_bug.cgi?id=1177237
(cherry picked from commit 76a2a5ce8b)
Coverity notes in xenapiDomainGetXMLDesc that 'vms' is dereferenced
a few times before a "if (vms) xen_vm_set_free(vms);" call is made.
Since we'd exit out much sooner if the fetch of the vms failed, just
remove the unnecessary "if (vms)" check.
(cherry picked from commit eab968c7d7)
Coverity complains that "net_set" is compared to NULL before calling
xen_network_set_free, but used rather liberally before that. While
I was looking at the code I also noted that if the virAsprintfQuiet
fails, then we leak our structures - so I added those too.
(cherry picked from commit 6da29e0faa)
Coverity points out that the return from virDomainDefParseString is
not checked in xenapiDomainCreateXML like it should be which could
end up in a NULL pointer dereference
(cherry picked from commit b193a1d617)
Coverity points out that check (def->uuid) has no effect since it's not
a pointer, rather an array of characters. Just remove the extranous check.
(cherry picked from commit 467c905909)
Since inception. Coverity complains that the code checks "(record ==
NULL && !session->ok)", but doesn't check (record != NULL) before
dereferencing at "record->is_a_template"
(cherry picked from commit 500d77f181)
Our code supports that for ages. When using a <filterref/> to an
<interface/> several parameters can be passed to the filter. Later,
when building firewall rules, parameters are substituted for their
values. However, our RNG schema allowed only one parameter to be
passed.
Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 6cc5080a09)
If a domain object is being removed and looked up concurrently we must
ensure we unlock the object before unreferencing it, since the latter
might free the object.
The flaw was introduced in commit feb1a4d792.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
(cherry picked from commit 616003d6bd)
Undefining a running, autostarted domain removes the autostart link, but
dom->autostart is not cleared. If the domain is subsequently redefined,
libvirt thinks it is already autostarted and will not create the link
even if requested:
# virsh dominfo example | grep Autostart
Autostart: enable
# ls /etc/libvirt/qemu/autostart/example.xml
/etc/libvirt/qemu/autostart/example.xml
# virsh undefine example
Domain example has been undefined
# virsh define example.xml
Domain example defined from example.xml
# virsh dominfo example | grep Autostart
Autostart: enable
# virsh autostart example
Domain example marked as autostarted
# ls /etc/libvirt/qemu/autostart/example.xml
ls: cannot access /etc/libvirt/qemu/autostart/example.xml: No such file or directory
This commit ensures dom->autostart is cleared whenever the config and
autostart link (if present) are removed.
The bridge network driver cleared this flag itself in networkUndefine.
This commit moves this into virNetworkDeleteConfig for symmetry with
virDomainDeleteConfig, and to ensure it is not missed in future network
drivers.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
(cherry picked from commit a6ec4f472d)
Error messages are already set in all code paths returning -1 from
networkGetNetworkAddress, so we don't want to overwrite them.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
(cherry picked from commit 64595431cd)
When creating qemu capabilities, a dummy virDomainObj is created just
because our monitor code expects that. However, the object is created
locked already. Then, under cleanup label, we simply unref the object
which results in whole domain object to be disposed. The object lock
is destroyed subsequently, but hey - it's still locked:
==24845== Thread #14's call to pthread_mutex_destroy failed
==24845== with error code 16 (EBUSY: Device or resource busy)
==24845== at 0x4C3024E: pthread_mutex_destroy (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==24845== by 0x531F72E: virMutexDestroy (virthread.c:83)
==24845== by 0x5302977: virObjectLockableDispose (virobject.c:237)
==24845== by 0x5302A89: virObjectUnref (virobject.c:265)
==24845== by 0x1DD37866: virQEMUCapsInitQMP (qemu_capabilities.c:3397)
==24845== by 0x1DD37CC6: virQEMUCapsNewForBinary (qemu_capabilities.c:3481)
==24845== by 0x1DD381E2: virQEMUCapsCacheLookup (qemu_capabilities.c:3609)
==24845== by 0x1DD30F8A: virQEMUCapsInitGuest (qemu_capabilities.c:744)
==24845== by 0x1DD31889: virQEMUCapsInit (qemu_capabilities.c:1020)
==24845== by 0x1DD7DD36: virQEMUDriverCreateCapabilities (qemu_conf.c:888)
==24845== by 0x1DDC57C0: qemuStateInitialize (qemu_driver.c:803)
==24845== by 0x53DC743: virStateInitialize (libvirt.c:777)
==24845==
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 954427c354)
in virDomainFSInfoFree(), don't free the virDomainFSInfo data.
==10670== 80 bytes in 2 blocks are definitely lost in loss record 576 of 793
==10670== at 0x4A06BC3: calloc (vg_replace_malloc.c:618)
==10670== by 0x509DEBD: virAlloc (viralloc.c:144)
==10670== by 0x19FBD558: qemuAgentGetFSInfo (qemu_agent.c:1837)
==10670== by 0x1A03CF91: qemuDomainGetFSInfo (qemu_driver.c:19238)
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
(cherry picked from commit f276b36d65)
To prevent a confusion about missing chardev argument in qemu
command line add a note about that behavior into documentation.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1129198
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
(cherry picked from commit 242e8c5472)
virLockManager*New APIs are never called with
VIR_LOCK_MANAGER_USES_STATE. Moreover, lockd driver does not maintain
any state that would need to be transferred during migration and thus it
should not mention VIR_LOCK_MANAGER_USES_STATE at all.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
(cherry picked from commit 6beb75d96d)
Commit 5aee81a0 introduced a new test for disk-serial. The test fails
on i686 arch because there is no need to add "-cpu qemu32" to command
line. To fix the test update emulator in XML to "/usr/bin/qemu" so we
don't add the "-cpu qemu32" to command while running the test on i686 or
x86_64 host.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
(cherry picked from commit c2851781f1)
Commit 3e4b783e fixed an issue with RNG schema where this address type
was missing, this commit adds a test for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 6b22e0b562)
According to the POSIX standard, off_t (returned by lseek) is defined as
signed integral type no shorter than int. Because our offset variable is defined
as unsigned long long, the original check was passed successfully if UINT64_MAX had
been used as offset value, due to implicit conversion.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1177219
(cherry picked from commit 3fde7986d6)
According to docs, we only support 2 link states for an interface
up/down, 'up' being the default state if link state is unspecified in
domain's XML, so the message when no link state is provided should be
changed a little.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1141119
(cherry picked from commit d9c7f014ee)
When the domain's source disk type is network, if source protocol is rbd
or sheepdog, the 'if().. break' will end the current case, which lead to
miss check the driver type is raw or qcow2. Libvirt will allow to create
internal snapshot for a running domain with raw format disk which based
on rbd storage.
While both protocols support internal snapshots of the disk qemu is not
able to use it as it requires some place to store the memory image. The
check if the disk is backed by a qcow2 image needs to be executed
always.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179533
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
(cherry picked from commit f7c1410b0e)
We have this function networkObjFromNetwork() which for given
virNetworkPtr tries to find corresponding virNetworkObjPtr. If no
object is found, a nice error message is printed out:
no network with matching uuid '$uuid' ($name)
Let's improve the error message produced by networkLookupByUUID to
follow that logic.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit bf1afdd491)
https://bugzilla.redhat.com/show_bug.cgi?id=1197600
So, libvirt uses pid file to track pid of started qemus. Whenever
a domain is started, its pid is put into corresponding pid file.
The pid file path is generated based on domain name and stored
into domain object internals. However, it's not stored in the
status XML and therefore lost on daemon restarts. Hence, later,
when domain is being shut down, the daemon does not know which
pid file to unlink, and the correct pid file is left behind. To
avoid this, lets generate the pid file path again in
qemuProcessReconnect().
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 63889e0c77)
In commit edd1295e1d I've introduced an
XML element that allows to configure state of the network interface
link. Somehow the RNG schema hunk ended up in a weird place in the
network schema definition. Move it to the right place and add a test
case.
Note that the link state is set up via the monitor at VM startup so I
originally didn't think of adding a test case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1173468
(cherry picked from commit 8eb907b8d0)
Since adding the support for scheduler policy settings in commit
8680ea97, there are two enums with the same information. That was
caused by rewriting the patch since first draft.
Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 2fd5880b3b)
The problem here was that when opening a channel, we were checking
whether the channel given is alias (can't be NULL for running domain) or
it's name, which can be NULL (for example with spicevmc). In case of
such domain qemuDomainOpenChannel() made the daemon crash.
STREQ_NULLABLE() is safe to use since the code in question is wrapped in
"if (name)" and is more readable, so use that instead of checking for
non-NULL "vm->def->channels[i]->target.name".
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit b3ea0a8fb8)
https://bugzilla.redhat.com/show_bug.cgi?id=921426
Add to the man page a more complete description of what exactly the
command expects on input and will return on output based on what is
currently supported.
Perhaps missing findPoolSources implementations are backends for
sheepdog and rbd. Also missing any backend is zfs.
(cherry picked from commit 567bd0fa57)
The virStorageBackendISCSIFindPoolSources API only needs the 'host' name
in order to discover iSCSI pools, it returns the various device paths.
On input, it's also possible to further restrict a search by providing the
port attribute for the host element and the (undocumented) initiator element.
For example:
$ virsh find-storage-pool-sources-as iscsi
error: Failed to find any iscsi pool sources
error: invalid argument: hostname and device path must be specified for iscsi sources
$ virsh find-storage-pool-sources-as iscsi 192.168.122.1
<sources>
<source>
<host name='192.168.122.1' port='3260'/>
<device path='iqn.2013-12.com.example:iscsi-chap-lclpool'/>
</source>
</sources>
(cherry picked from commit 30f69ae86b)
https://bugzilla.redhat.com/show_bug.cgi?id=1070695
Modify the virsh man page to more accurately describe which values are
set by the virsh setmem and displayed by the virsh memtune or dominfo
based on the setmem command results.
(cherry picked from commit 69db32f93d)
Our documentation isn't 100% clear about hostdev 'managed' attribute usage,
because it only makes sense to use it with PCI devices, yet we format
this attribute to all hostdev devices. By adding a note into the docs,
we can possibly avoid confusion from customer's side and also avoid a solution
using ternary logic.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1155887
(cherry picked from commit ccfe9e4809)
Trying to use qemu:///session to create a storage pool pointing at
/tmp will usually fail with something like:
$ virsh pool-start tmp
error: Failed to start pool tmp
error: cannot open volume '/tmp/systemd-private-c38cf0418d7a4734a66a8175996c384f-colord.service-kEyiTA': Permission denied
If any volume in an FS pool can't be opened by the daemon, the refresh
fails, and the pool can't be used.
This causes pain for virt-install/virt-manager though. Imaging a user
downloads a disk image to /tmp. virt-manager wants to import /tmp as
a storage pool, so we can detect what disk format it is, and set the
XML correctly. However this case will likely fail as explained above.
Change the logic here to skip volumes that fail to open. This could
conceivably cause user complaints along the lines of 'why doesn't
libvirt show $ROOT-OWNED-VOLUME-FOO', but figuring that currently
the pool won't even startup, I don't think there are any current
users that care about that case.
https://bugzilla.redhat.com/show_bug.cgi?id=1103308
(cherry picked from commit 56476f6a2d)
When parsing XML, we validate the passed ostype + arch combo against
the detected hypervisor capabilities. This has led to the following
problem:
- Define x86 qemu guest
- qemu is inadvertently removed from the host
- libvirtd is restarted. fails to parse VM config since arch is removed
- 'virsh list --all' is now empty, user is wondering where their VMs went
Add a new internal flag VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS. Use
it when loading VM and snapshot configs from disk.
https://bugzilla.redhat.com/show_bug.cgi?id=1043572
(cherry picked from commit f1a89a8b6d)
If no <os><type> was specified:
before: unknown OS type no OS type
after : xml error: an os <type> must be specified
If an <os><type> is specified that's not in our capabiliities data:
before: unknown OS type: $type
after : unsupported configuration: no support found for os <type> '$type'
VIR_ERR_OS_TYPE is now unused (as it should be frankly) so drop its strings
as well to save our translators some effort.
(cherry picked from commit 3700c065cd)
Fedora doesn't ship OVMF/AAVMF builds in its repos due to licensing
issues, so the recommended way to consume these bits is via Gerd's
nightly repo: https://www.kraxel.org/repos
Let's teach fedora builds about the loader/nvram pairs these packages
installed, so users don't need to edit qemu.conf to get virt-manager
UEFI support.
(cherry picked from commit f93e121129)
