Now the a dmi-to-pci-bridge is automatically added just as it's needed
(when a pci-bridge is being added), we no longer have any need to
force-add one to every single Q35 domain.
Previously libvirt would only add pci-bridge devices automatically
when an address was requested for a device that required a legacy PCI
slot and none was available. This patch expands that support to
dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a
machine with a pcie-root), and pcie-root-port (which is needed to add
a hotpluggable PCIe device). It does *not* automatically add
pcie-switch-upstream-ports or pcie-switch-downstream-ports (and
currently there are no plans for that).
Given the existing code to auto-add pci-bridge devices, automatically
adding pcie-root-ports is fairly straightforward. The
dmi-to-pci-bridge support is a bit tricky though, for a few reasons:
1) Although the only reason to add a dmi-to-pci-bridge is so that
there is a reasonable place to plug in a pci-bridge controller,
most of the time it's not the presence of a pci-bridge *in the
config* that triggers the requirement to add a dmi-to-pci-bridge.
Rather, it is the presence of a legacy-PCI device in the config,
which triggers auto-add of a pci-bridge, which triggers auto-add of
a dmi-to-pci-bridge (this is handled in
virDomainPCIAddressSetGrow() - if there's a request to add a
pci-bridge we'll check if there is a suitable bus to plug it into;
if not, we first add a dmi-to-pci-bridge).
2) Once there is already a single dmi-to-pci-bridge on the system,
there won't be a need for any more, even if it's full, as long as
there is a pci-bridge with an open slot - you can also plug
pci-bridges into existing pci-bridges. So we have to make sure we
don't add a dmi-to-pci-bridge unless there aren't any
dmi-to-pci-bridges *or* any pci-bridges.
3) Although it is strongly discouraged, it is legal for a pci-bridge
to be directly plugged into pcie-root, and we don't want to
auto-add a dmi-to-pci-bridge if there is already a pci-bridge
that's been forced directly into pcie-root.
Although libvirt will now automatically create a dmi-to-pci-bridge
when it's needed, the code still remains for now that forces a
dmi-to-pci-bridge on all domains with pcie-root (in
qemuDomainDefAddDefaultDevices()). That will be removed in a future
patch.
For now, the pcie-root-ports are added one to a slot, which is a bit
wasteful and means it will fail after 31 total PCIe devices (30 if
there are also some PCI devices), but helps keep the changeset down
for this patch. A future patch will have 8 pcie-root-ports sharing the
functions on a single slot.
Andrea had the right idea when he disabled the "reserve an extra
unused slot" bit for aarch64/virt. For *any* PCI Express-based
machine, it is pointless since 1) an extra legacy-PCI slot can't be
used for hotplug, since hotplug into legacy PCI slots doesn't work on
PCI Express machinetypes, and 2) even for "coldplug" expansion,
everybody will want to expand using Express controllers, not legacy
PCI.
This patch eliminates the extra slot reserve unless the system has a
pci-root (i.e. legacy PCI)
The nec-usb-xhci device (which is a USB3 controller) has always
presented itself as a PCI device when plugged into a legacy PCI slot,
and a PCIe device when plugged into a PCIe slot, but libvirt has
always auto-assigned it to a legacy PCI slot.
This patch changes that behavior to auto-assign to a PCIe slot on
systems that have pcie-root (e.g. Q35 and aarch64/virt).
Since we don't yet auto-create pcie-*-port controllers on demand, this
means a config with an nec-xhci USB controller that has no PCI address
assigned will also need to have an otherwise-unused pcie-*-port
controller specified:
<controller type='pci' model='pcie-root-port'/>
<controller type='usb' model='nec-xhci'/>
(this assumes there is an otherwise-unused slot on pcie-root to accept
the pcie-root-port)
The e1000e is an emulated network device based on the Intel 82574,
present in qemu 2.7.0 and later. Among other differences from the
e1000, it presents itself as a PCIe device rather than legacy PCI. In
order to get it assigned to a PCIe controller, this patch updates the
flags setting for network devices when the model name is "e1000e".
(Note that for some reason libvirt has never validated the network
device model names other than to check that there are no dangerous
characters in them. That should probably change, but is the subject of
another patch.)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1343094
libvirt previously assigned nearly all devices to a "hotpluggable"
legacy PCI slot even on machines with a PCIe root bus (and even though
most such machines don't even support hotplug on legacy PCI slots!)
Forcing all devices onto legacy PCI slots means that the domain will
need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a
pci-bridge (to provide hotpluggable legacy PCI slots which, again,
usually aren't hotpluggable anyway).
To help reduce the need for these legacy controllers, this patch tries
to assign virtio-1.0-capable devices to PCIe slots whenever possible,
by setting appropriate connectFlags in
virDomainCalculateDevicePCIConnectFlags(). Happily, when that function
was written (just a few commits ago) it was created with a
"virtioFlags" argument, set by both of its callers, which is the
proper connectFlags to set for any virtio-*-pci device - depending on
the arch/machinetype of the domain, and whether or not the qemu binary
supports virtio-1.0, that flag will have either been set to PCI or
PCIe. This patch merely enables the functionality by setting the flags
for the device to whatever is in virtioFlags if the device is a
virtio-*-pci device.
NB: the first virtio video device will be placed directly on bus 0
slot 1 rather than on a pcie-root-port due to the override for primary
video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not
to change that is a topic of discussion, but this patch doesn't change
that particular behavior.
NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root
complex) does *not* support hotplug, this means that suitable
controllers must also be in the config (i.e. either pcie-root-port, or
pcie-downstream-port). For now, libvirt doesn't add those
automatically, so if you put virtio devices in a config for a qemu
that has PCIe-capable virtio devices, you'll need to add extra
pcie-root-ports yourself. That requirement will be eliminated in a
future patch, but for now, it's simple to do this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
...
Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
This patch cleans up the connect flags for certain types/models of
devices that aren't PCI to return 0. In the future that may be used as
an indicator to the caller about whether or not a device needs a PCI
address. For now it's just ignored, except for in
virDomainPCIAddressEnsureAddr() - called during device hotplug - (and
in some cases actually needs to be re-set to PCI|HOTPLUGGABLE just in
case someone (in some old config) has manually set a PCI address for a
device that isn't PCI.
Before now, all the qemu hotplug functions assumed that all devices to
be hotplugged were legacy PCI endpoint devices
(VIR_PCI_CONNECT_TYPE_PCI_DEVICE). This worked out "okay", because all
devices *are* legacy PCI endpoint devices on x86/440fx machinetypes,
and hotplug didn't work properly on machinetypes using PCIe anyway
(hotplugging onto a legacy PCI slot doesn't work, and until commit
b87703cf any attempt to manually specify a PCIe address for a
hotplugged device would be erroneously rejected).
This patch makes all qemu hotplug operations honor the pciConnectFlags
set by the single all-knowing function
qemuDomainDeviceCalculatePCIConnectFlags(). This is done in 3 steps,
but in a single commit since we would have to touch the other points
at each step anyway:
1) add a flags argument to the hypervisor-agnostic
virDomainPCIAddressEnsureAddr() (previously it hardcoded
..._PCI_DEVICE)
2) add a new qemu-specific function qemuDomainEnsurePCIAddress() which
gets the correct pciConnectFlags for the device from
qemuDomainDeviceConnectFlags(), then calls
virDomainPCIAddressEnsureAddr().
3) in qemu_hotplug.c replace all calls to
virDomainPCIAddressEnsureAddr() with calls to
qemuDomainEnsurePCIAddress()
So in effect, we're putting a "shim" on top of all calls to
virDomainPCIAddressEnsureAddr() that sets the right pciConnectFlags.
Set pciConnectFlags in each device's DeviceInfo and then use those
flags later when validating existing addresses in
qemuDomainCollectPCIAddress() and when assigning new addresses with
qemuDomainPCIAddressReserveNextAddr() (rather than scattering the
logic about which devices need which type of slot all over the place).
Note that the exact flags set by
qemuDomainDeviceCalculatePCIConnectFlags() are different from the
flags previously set manually in qemuDomainCollectPCIAddress(), but
this doesn't matter because all validation of addresses in that case
ignores the setting of the HOTPLUGGABLE flag, and treats PCIE_DEVICE
and PCI_DEVICE the same (this lax checking was done on purpose,
because there are some things that we want to allow the user to
specify manually, e.g. assigning a PCIe device to a PCI slot, that we
*don't* ever want libvirt to do automatically. The flag settings that
we *really* want to match are 1) the old flag settings in
qemuDomainAssignDevicePCISlots() (which is HOTPLUGGABLE | PCI_DEVICE
for everything except PCI controllers) and 2) the new flag settings
done by qemuDomainDeviceCalculatePCIConnectFlags() (which are
currently exactly that - HOTPLUGGABLE | PCI_DEVICE for everything
except PCI controllers).
The lowest level function of this trio
(qemuDomainDeviceCalculatePCIConnectFlags()) aims to be the single
authority for the virDomainPCIConnectFlags to use for any given device
using a particular arch/machinetype/qemu-binary.
qemuDomainFillDevicePCIConnectFlags() sets info->pciConnectFlags in a
single device (unless it has no virDomainDeviceInfo, in which case
it's a NOP).
qemuDomainFillAllPCIConnectFlags() sets info->pciConnectFlags in all
devices that have a virDomainDeviceInfo
The latter two functions aren't called anywhere yet. This commit is
just making them available. Later patches will replace all the current
hodge-podge of flag settings with calls to this single authority.
Coverity identified that this variable might be leaked. And it's
right. If an error occurred and we have to roll back the control
jumps to try_remove label where we save the current error (see
0e82fa4c34 for more info). However, inside the code a jump onto
other label is possible thus leaking the error object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As was suggested in an earlier review comment[1], we can
catch some additional code points by cleaning up how we use the
hostdev subsystem type in some switch statements.
[1] End of https://www.redhat.com/archives/libvir-list/2016-September/msg00399.html
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
The memory device alias needs to be treated as machine ABI as qemu is
using it in the migration stream for section labels. To simplify this
generate the alias from the slot number unless an existing broken
configuration is detected.
With this patch the aliases are predictable and even certain
configurations which would not be migratable previously are fixed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1359135
As with other devices assign the slot number right away when adding the
device. This will make the slot numbers static as we do with other
addressing elements and it will ultimately simplify allocation of the
alias in a static way which does not break with qemu.
Detect on reconnect to a running qemu VM whether the alias of a
hotpluggable memory device (dimm) does not match the dimm slot number
where it's connected to. This is necessary as qemu is actually
considering the alias as machine ABI used to connect the backend object
to the dimm device.
This will require us to keep them consistent so that we can reliably
restore them on migration. In some situations it was currently possible
to create a mismatched configuration and qemu would refuse to restore
the migration stream.
To avoid breaking existing VMs we'll need to keep the old algorithm
though.
Simplify handling of the 'dimm' address element by allowing to specify
the slot number only. This will allow libvirt to allocate slot numbers
before starting qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1386976
We have everything ready. Actually the only limitation was our
check that denied hotplug of vhost-user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there is an error hotpluging a net device (for whatever
reason) a rollback operation is performed. However, whilst doing
so various helper functions that are called report errors on
their own. This results in the original error to be overwritten
and thus misleading the user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Even though using /dev/shm/asdf as the backend, we still need to make
the mapping shared. The original patch forgot to add that parameter.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1392031
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
../../src/qemu/qemu_capabilities.c:3757: error: declaration of
'basename' shadows a global declaration [-Wshadow]
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Function qemuDomainAttachShmemDevice() steals the device data if the
hotplug was successful, but the condition checked for unsuccessful
execution otherwise.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Propagate the selected or default level to qemu if it's supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This helps in selecting log level of the gluster gfapi, output to stderr.
The option is 'gluster_debug_level', can be tuned by editing
'/etc/libvirt/qemu.conf'
Debug levels ranges 0-9, with 9 being the most verbose, and 0
representing no debugging output. The default is the same as it was
before, which is a level of 4. The current logging levels defined in
the gluster gfapi are:
0 - None
1 - Emergency
2 - Alert
3 - Critical
4 - Error
5 - Warning
6 - Notice
7 - Info
8 - Debug
9 - Trace
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow detecting capabilities according to the qemu QMP schema. This is
necessary as sometimes the availability of certain options depends on
the presence of a field in the schema.
This patch adds support for loading the QMP schema when detecting qemu
capabilities and adds a very simple query language to allow traversing
the schema and selecting a certain element from it.
The infrastructure in this patch uses a query path to set a specific
capability flag according to the availability of the given element in
the schema.
https://bugzilla.redhat.com/show_bug.cgi?id=1379196
Add check in qemuCheckDiskConfig for an invalid combination
of using the 'scsi' bus for a block 'lun' device and any disk
source format other than 'raw'.
Commit c29e6d4805 cause build failure on RHEL-6:
../../src/qemu/qemu_capabilities.c: In function 'virQEMUCapsIsValid':
../../src/qemu/qemu_capabilities.c:4085: error: declaration of 'ctime'
shadows a global declaration [-Wshadow]
/usr/include/time.h:258: error: shadowed declaration is here [-Wshadow]
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's keep all run time validation of cached QEMU capabilities in
virQEMUCapsIsValid and call it whenever we access the cache.
virQEMUCapsInitCached should keep only the checks which do not make
sense once the cache is loaded in memory.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virQEMUCapsLoadCache loads QEMU capabilities from a file, but strangely
enough it returns the loaded QEMU binary ctime in qemuctime parameter
instead of storing it in qemuCaps.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This is needed in order to migrate a domain with shmem devices as that
is not allowed to migrate.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
QEMU added support for ivshmem-plain and ivshmem-doorbell. Those are
reworked varians of legacy ivshmem that are compatible from the guest
POV, but not from host's POV and have sane specification and handling.
Details about the newer device type can be found in qemu's commit
5400c02b90bb:
http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We're keeping some things at default and that's not something we want to
do intentionally. Let's save some sensible defaults upfront in order to
avoid having problems later. The details for the defaults (of the newer
implementation) can be found in qemu's commit 5400c02b90bb:
http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb
Since we are merely saving the defaults it will not change the guest ABI
and thanks to the fact that we're doing it in the PostParse callback it
will not break the ABI stability checks.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Unlike other migration capabilities, post-copy is also set on the
destination host which means it doesn't disappear once domain is
migrated. As a result of that other functionality which internally uses
migration to a file (virDomainManagedSave, virDomainSave,
virDomainCoreDump) may fail after migration because the post-copy
capability is still set.
https://bugzilla.redhat.com/show_bug.cgi?id=1374718
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If we failed to unlink old dom cfg file, we goto rollback.
But inside rollback, we fogot to unlink the new dom cfg file.
This patch fixes this issue.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Whilst working on another issue, I've noticed that in some
functions we have a local @driver variable among with access to
global @qemu_driver variable. This makes no sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than waiting until we've free'd up all the resources, cause the
'workerPool' thread pool to flush as soon as possible during stateCleanup.
Otherwise, it's possible something waiting to run will SEGV such as is the
case during race conditions of simultaneous exiting libvirtd and qemu process.
Resolves the following crash:
[1] crash backtrace: (bt is shortened a bit):
0 0x00007ffff7282f2b in virClassIsDerivedFrom
(klass=0xdeadbeef, parent=0x55555581d650) at util/virobject.c:169
1 0x00007ffff72835fd in virObjectIsClass
(anyobj=0x7fffd024f580, klass=0x55555581d650) at util/virobject.c:365
2 0x00007ffff7283498 in virObjectLock
(anyobj=0x7fffd024f580) at util/virobject.c:317
3 0x00007ffff722f0a3 in virCloseCallbacksUnset
(closeCallbacks=0x7fffd024f580, vm=0x7fffd0194db0,
cb=0x7fffdf1af765 <qemuProcessAutoDestroy>)
at util/virclosecallbacks.c:164
4 0x00007fffdf1afa7b in qemuProcessAutoDestroyRemove
(driver=0x7fffd00f3a60, vm=0x7fffd0194db0) at qemu/qemu_process.c:6365
5 0x00007fffdf1adff1 in qemuProcessStop
(driver=0x7fffd00f3a60, vm=0x7fffd0194db0, reason=VIR_DOMAIN_SHUTOFF_CRASHED,
asyncJob=QEMU_ASYNC_JOB_NONE, flags=0)
at qemu/qemu_process.c:5877
6 0x00007fffdf1f711c in processMonitorEOFEvent
(driver=0x7fffd00f3a60, vm=0x7fffd0194db0) at qemu/qemu_driver.c:4545
7 0x00007fffdf1f7313 in qemuProcessEventHandler
(data=0x555555832710, opaque=0x7fffd00f3a60) at qemu/qemu_driver.c:4589
8 0x00007ffff72a84c4 in virThreadPoolWorker
(opaque=0x555555805da0) at util/virthreadpool.c:167
Thread 1 (Thread 0x7ffff7fb1880 (LWP 494472)):
1 0x00007ffff72a7898 in virCondWait
(c=0x7fffd01c21f8, m=0x7fffd01c21a0) at util/virthread.c:154
2 0x00007ffff72a8a22 in virThreadPoolFree
(pool=0x7fffd01c2160) at util/virthreadpool.c:290
3 0x00007fffdf1edd44 in qemuStateCleanup ()
at qemu/qemu_driver.c:1102
4 0x00007ffff736570a in virStateCleanup ()
at libvirt.c:807
5 0x000055555556f991 in main (argc=1, argv=0x7fffffffe458) at libvirtd.c:1660
We don't support cpu pinning for TCG domains because QEMU runs them in
one thread only. But vcpupin command was able to set them, which
resulted in a failed startup, so make sure that doesn't happen.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
When starting a new domain, we allocate the USB addresses and keep
an address cache in the domain object's private data.
However this data is lost on libvirtd restart.
Also generate the address cache if all the addresses have been
specified, so that devices hotplugged after libvirtd restart
also get theirs assigned.
https://bugzilla.redhat.com/show_bug.cgi?id=1387666
Return 0 instead of 1, so that qemuDomainAttachChrDevice does not
assume the address neeeds to be released on error.
No functional change, since qemuDomainReleaseDeviceAddress has been a noop
for virtio serial addresses since the address cache was removed
in commit 19a148b.
This time do not require an address cache as a parameter.
Simplify qemuDomainAttachChrDeviceAssignAddr to not generate
the virtio serial address cache for devices of other types.
Partially reverts commit 925fa4b.
Commit 19a148b dropped the cache from QEMU's private domain object.
Assume the callers do not have the cache by default and use
a longer name for the internal ones that do.
This makes the shorter 'virDomainVirtioSerialAddrAutoAssign'
name availabe for a function that will not require the cache.
When user tries to resume already running domain (Qemu or LXC)
VIR_ERR_OPERATION_INVALID error should be raised with message that
domain is already running.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1009008
Support for virtio disks was added in commit id 'fceeeda', but not for
SCSI drives. Add the secret for the server when hotplugging a SCSI drive.
No need to make any adjustments for unplug since that's handled during
the qemuDomainDetachDiskDevice call to qemuDomainRemoveDiskDevice in
the qemuDomainDetachDeviceDiskLive switch.
Added a test to/for the command line processing to show the command line
options when adding a SCSI drive for the guest.
https://bugzilla.redhat.com/show_bug.cgi?id=1300776
Complete the implementation of support for TLS encryption on
chardev TCP transports by adding the hotplug ability of a secret
to generate the passwordid for the TLS object for chrdev, RNG,
and redirdev.
Fix up the order of object removal on failure to be the inverse
of the attempted attach (for redirdev, chr, rng) - for each the
tls object was being removed before the chardev backend.
Likewise, add the ability to hot unplug that secret object as well
and be sure the order of unplug matches that inverse order of plug.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.
Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.
Add test for at least a serial chardev as an example.
Need to remove the drive first, then the secobj and/or encobj if they exist.
This is because the drive has a dependency on secobj (or the secret for
the networked storage server) and/or the encobj (or the secret for the
LUKS encrypted volume). Deleting either object first leaves an drive
without it's respective objects.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add in the block I/O throttling length/duration parameter to the command
line if supported. If not supported, fail command creation.
Add the xml2argvtest for testing.
Add support for a duration/length for the bps/iops and friends.
Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options
total_bytes_sec_max_length
write_bytes_sec_max_length
read_bytes_sec_max_length
total_iops_sec_max_length
write_iops_sec_max_length
read_iops_sec_max_length
Create a helper to set the bytes/iops iotune default values based on
the current qemu setting for both the live and persistent definitions.
NB: This also fixes an unreported bug where the persistent values for
*_max and size_iops_sec would be set back to 0 if unrelated persistent
values were set.
This patch will also adjust the qemuMonitorJSONSetBlockIoThrottle error
procession so that rather than returning/displaying:
"error: internal error: Unexpected error"
Fetch the actual error message from qemu and display that
Create a macros to hide all the comparisons for each of the fields.
Add a 'continue;' for a compiler hint that we only need to find one
this should be similar enough to the if - elseif - elseif logic.
Commit id '2c32237' added the TLS object removal to the DetachChrDevice
all when it should have been added to the RemoveChrDevice since that's
the norm for similar processing (e.g. disk)
Signed-off-by: John Ferlan <jferlan@redhat.com>
After succesfully reading an outdated caps cache from disk,
calling virQEMUCapsReset did not properly clear out the calculated
host CPU model. This lead to a memory leak when the host CPU model
pointer was overwritten later in virQEMUCapsNewForBinaryInternal.
Introduced by commit 68c70118.
Extended qemuDomainGetStatsVcpu to include the per vcpu halted
indicator if reported by QEMU. The key for new boolean value
has the format "vcpu.<n>.halted".
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Adding a field to the domain's private vcpu object to hold the halted
state information.
Adding two functions in support of the halted state:
- qemuDomainGetVcpuHalted: retrieve the halted state from a
private vcpu object
- qemuDomainRefreshVcpuHalted: obtain the per-vcpu halted states
via qemu monitor and store the results in the private vcpu objects
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Hao QingFeng <haoqf@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Extended the qemuMonitorCPUInfo with a halted flag. Extract the halted
flag for both text and JSON monitor.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
An upcoming commit will remove the "flag" argument from all the calls
to reserve the next available address|slot, but I don't want to change
the arguments in the hypervisor-agnostic
virDomainPCIAddressReserveNext*() functions, so this patch places a
simple qemu-specific wrapper around those functions - the new
functions don't take a flags arg, but grab it from the device's
info->pciConnectFlags.
Since TLS was introduced hostwide for libvirt 2.3.0 and a domain
configurable haveTLS was implemented for libvirt 2.4.0, we have to
modify the migratable XML for specific case where the 'tls' attribute
is based on setting from qemu.conf.
The "tlsFromConfig" is libvirt internal attribute and is stored only in
status XML to ensure that when libvirtd is restarted this internal flag
is not lost by the restart.
That flag is used to decide whether we should put *tls* attribute to
migratable XML or not.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently the union has only one member so remove that union. If there
is a need to add a new type of source for new bus in the future this
will force the author to add a union and properly check bus type before
any access to union member.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit id '2c322378' missed the nuance that the rng backend could be
using a TCP chardev and if TLS is enabled on the host, thus will need
to have the TLS object added.
Commit id '2c322378' missed the nuance that the redirdev backend could
be using a TCP chardev and if TLS is enabled on the host, thus will need
to have the TLS object added.
Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainRedirdevDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainSmartcardDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
from virDomainDefPtr to virDomainObjPtr so that the function has
access to the other parts of the virDomainObjPtr. Take advantage of
this by removing the "priv" arg and retrieving it from the
virDomainObjPtr instead.
No functional change.
More occurences of repeatedly dereferencing the same pointer stored in
an array are replaced with the definition of a temporary pointer that
is then used directly. No functional change.
Commit id '5f2a132786' should have placed the data in the host source
def structure since that's also used by smartcard, redirdev, and rng in
order to provide a backend tcp channel. The data in the private structure
will be necessary in order to provide the secret properly.
This also renames the previous names from "Chardev" to "ChrSource" for
the private data structures and API's
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When hotplugging networks with ancient QEMUs not supporting
QEMU_CAPS_NETDEV, we use space instead of a comma as the separator
between the network type and other options.
Except for "user", all the network types pass other options
and use up the first separator by the time we get to the section
that adds the alias (or vlan for QEMUs without CAPS_NETDEV).
Since the alias/vlan is mandatory, convert all preceding code to add
the separator at the end, removing the need to rewrite type_sep for
all types but NET_TYPE_USER.
Modeled after the qemuDomainHostdevPrivatePtr (commit id '27726d8c'),
create a privateData pointer in the _virDomainChardevDef to allow storage
of private data for a hypervisor in order to at least temporarily store
secret data for usage during qemuBuildCommandLine.
NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the secret data, there's no need to add code
code to handle this new structure there.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new qemu.conf variables to store the UUID for the secret that could
be used to present credentials to access the TLS chardev. Since this will
be a server level and it's possible to use some sort of default, introduce
both the default and chardev logic at the same time making the setting of
the chardev check for it's own value, then if not present checking whether
the default value had been set.
Signed-off-by: John Ferlan <jferlan@redhat.com>
There was inconsistency between alias used to create tls-creds-x509
object and alias used to link that object to chardev while hotpluging.
Hotplug ends with this error:
error: Failed to detach device from channel-tcp.xml
error: internal error: unable to execute QEMU command 'chardev-add':
No TLS credentials with id 'objcharchannel3_tls0'
In XML we have for example alias "serial0", but on qemu command line we
generate "charserial0".
The issue was that code, that creates QMP command to hotplug chardev
devices uses only the second alias "charserial0" and that alias is also
used to link the tls-creds-x509 object.
This patch unifies the aliases for tls-creds-x509 to be always generated
from "charserial0".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Instead of typing the prefix every time we want to append parameters
to qemu command line use a variable that contains prefixed alias.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to make sure that the chardev is TCP. Without this check we
may access different part of union and corrupt pointers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1366108
There are couple of things that needs to be done in order to
allow vhost-user hotplug. Firstly, vhost-user requires a chardev
which is connected to vhost-user bridge and through which qemu
communicates with the bridge (no acutal guest traffic is sent
through there, just some metadata). In order to generate proper
chardev alias, we must assign device alias way sooner.
Then, because we are plugging the chardev first, we need to do
the proper undo if something fails - that is remove netdev too.
We don't want anything to be left over in case attach fails at
some point.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1366505
So far, this function lacked support for
VIR_DOMAIN_NET_TYPE_VHOSTUSER leaving callers to hack around the
problem by constructing the command line on their own. This is
not ideal as it blocks hot plug support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, what we do for vhost-user network is generate the
following part of command line:
-netdev type=vhost-user,id=hostnet0,chardev=charnet0
There's no need for 'type=' it is the default. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no need to reinvent the wheel here. We already have a
function to format virDomainChrSourceDefPtr. It's called
qemuBuildChrChardevStr(). Use that instead of some dummy
virBufferAsprintf().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This alone makes not much sense. But the aim is to reuse this
function in qemuBuildVhostuserCommandLine() where 'nowait' is not
supported for vhost-user devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We tend to prevent using 'default' in switches. And it is for a
good reason - control may end up in paths we wouldn't want for
new values. In this specific case, if qemuBuildHostNetStr is
called over VIR_DOMAIN_NET_TYPE_VHOSTUSER it would produce
meaningless output. Fortunately, there no such call yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of blindly claim support for hot-plugging of every
interface type out there we should copy approach we have for
device types: white listing supported types and explicitly error
out on unsupported ones.
For instance, trying to hotplug vhostuser interface results in
nothing usable from guest currently. vhostuser typed interfaces
require additional work on our side.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking at its
beginning and then have one big switch for all the interface
types it supports.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemuBuildSmbiosBiosStr and qemuBuildSmbiosSystemStr return NULL if
there's nothing to format on the commandline. Reporting errors from
buffer creation doesn't make sense since it would be ignored.
This initially started as a fix of some debug printing in
virCgroupDetect. However it turned out that other places suffer
from the similar problem. While dealing with pids, esp. in cases
where we cannot use pid_t for ABI stability reasons, we often
chose an unsigned integer type. This makes no sense as pid_t is
signed.
Also, new syntax-check rule is introduced so we won't repeat this
mistake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are two video devices with models without VGA compatibility mode.
They are primary used as secondary video devices, but in some cases it
is required to use them also as primary video devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This improves commit 706b5b6277 in a way that we check qemu capabilities
instead of what architecture we are running on to detect whether we can
use *virtio-vga* model or not. This is not a case only for arm/aarch64.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit 21373feb added support for primary virtio-vga device but it was
checking for virtio-gpu. Let's check for existence of virtio-vga if we
want to use it.
Virtio video device is currently represented by three different models
*virtio-gpu-device*, *virtio-gpu-pci* and *virtio-vga*. The first two
models are tied together and if virtio video devices is compiled in they
both exist. However, the *virtio-vga* model doesn't have to exist on
some architectures even if the first two models exist. So we cannot
group all three together.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Before this patch we've checked qemu capabilities for video devices
only while constructing qemu command line using "-device" option.
Since we support qemu only if "-device" option is present we can use
the same capabilities to check also video devices while using "-vga"
option to construct qemu command line.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All definition validation that doesn't depend on qemu capabilities
and was allowed previously as valid definition should be placed into
qemuDomainDefValidate.
The check whether video type is supported or not was based on an enum
that translates type into model. Use switch to ensure that if new
video type is added, it will be properly handled.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We generally uses QEMU_CAPS_DEVICE_$NAME to probe for existence of some
device and QEMU_CAPS_$NAME_$PROP to probe for existence of some property
of that device.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If QEMU in question supports QMP, this capability is set if
QEMU_CAPS_DEVICE_QXL was set based on existence of "-device qxl". If
libvirt needs to parse *help*, because there is no QMP support, it
checks for existence of "-vga qxl", but it also parses output of
"-device ?" and sets QEMU_CAPS_DEVICE_QXL too.
Now that libvirt supports only QEMU that has "-device" implemented it's
safe to drop this capability and stop using it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch simplifies QEMU capabilities for QXL video device. QEMU
exposes this device as *qxl-vga* and *qxl* and they are both the same
device with the same set of parameters, the only difference is that
*qxl-vga* includes VGA compatibility.
Based on QEMU code they are tied together so it's safe to check only for
presence of only one of them.
This patch also removes an invalid test case "video-qxl-sec-nodevice"
where there is only *qxl-vga* device and *qxl* device is not present.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Qemu supports *xen* video device only with XEN and this code was part
of xenner code. We dropped support for xenner in commit de9be0a.
Before this patch if you used 'xen' video type you ended up with
domain without any video device at all. Now we don't allow to start
such domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It was never safe anyway and as such shouldn't have been enabled in the
first place. Future patches will allow hot-(un)pluging of some ivshmem
devices as a workaround.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently Libvirt allows attempts to migrate read only disks. Qemu
cannot handle this as read only disks cannot be written to on the
destination system. The end result is a cryptic error message and a
failed migration.
This patch causes migration to fail earlier and provides a meaningful
error message stating that migrating read only disks is not supported.
Signed-off-by: Corey S. McQuay <csmcquay@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
The intel-iommu device has existed since QEMU 2.2.0, but
it was only possible to create it with -device since
QEMU 2.7.0, thanks to:
commit 621d983a1f9051f4cfc3f402569b46b77d8449fc
Author: Marcel Apfelbaum <marcel@redhat.com>
Date: Mon Jun 27 18:38:34 2016 +0300
hw/iommu: enable iommu with -device
Use the standard '-device intel-iommu' to create the IOMMU device.
The legacy '-machine,iommu=on' can still be used.
The libvirt capability check & command line formatting code
is thus broken for all QEMU versions 2.2.0 -> 2.6.0 inclusive.
This fixes it to use iommu=on instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since introduction of chardev hotplug the code was wrong for the UDP
case and basically created a TCP socket instead. Use proper objects and
type for UDP.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1377602
We're about to add more options, let's avoid having multiple if-then-else
which each try to set up the qemuMonitorJSONMakeCommand call with all the
parameters it knows about.
Instead, use the fact that when a NULL is found in the argument list that
processing of the remaining arguments stops and just have call.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We're about to add 6 new options and it appears (from testing) one cannot
utilize both the shorthand (alias) and (much) longer names for the arguments.
So modify the command builder to use the longer name and of course alter the
test output .args to have the similarly innocuous long name.
Also utilize a macro to build that name makes it so much more visually
appealing and saves a few characters or potential cut-n-paste issues.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reduce some cut-n-paste code by creating common helper. Make use of the
recently added virJSONValueObjectStealArray to grab the devices list as
part of the common code (we we can Free the reply) and return devices for
each of the callers to continue to parse.
NB: This also adds error checking to qemuMonitorJSONDiskNameLookup
Signed-off-by: John Ferlan <jferlan@redhat.com>
If attaching to a qemu process fails after opening the monitor socket
libvirt does not clean up the monitor. As the monitor also holds a
reference to the domain object the qemu attach API basically leaks it.
QEMU also does not interact on a second monitor connection and thus a
further attempt to attach to it would lock up.
Prevent libvirt from leaking the monitor by explicitly closing it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378401
Attaching to a existing qemu process allows to get us into a situation
when qemu is new enough to have JSON monitor and new vCPU hotplug but
the json monitor is not used. The vCPU detection code would require it
though. This broke attaching to qemu processes.
Make the condition less strict and just skip the vCPU hotplug detection
if JSON monitor is not available.
Resolves one of the symptoms in:
https://bugzilla.redhat.com/show_bug.cgi?id=1378401
This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.
This reverts commit 581b7756af.
Certain operations may make the vcpu order information invalid. Since
the order is primarily used to ensure migration compatibility and has
basically no other user benefits, clear the order prior to certain
operations and document that it may be cleared.
All the operations that would clear the order can still be properly
executed by defining a new domain configuration rather than using the
helper APIs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370357
virDomainDefSetVcpus was not designed to handle coldplug of vcpus now
that we can set state of vcpus individually.
Introduce qemuDomainSetVcpusConfig that properly handles state changes
of vcpus when coldplugging so that invalid configurations are not
created.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375939
The current code that validates duplicate vcpu order would not work
properly if the order would exceed def->maxvcpus. Limit the order to the
interval described.
The bitmap indexes for the order duplicate check are shifted to 0 since
vcpu order 0 is not allowed. The error message doesn't need such
treating though.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370360
If this reminds you of a commit message from around a year ago, it's
41c2aa729f and yes, we're dealing with
"the same thing" again. Or f309db1f4d and
it's similar.
There is a logic in place that if there is no real need for
memory-backend-file, qemuBuildMemoryBackendStr() returns 0. However
that wasn't the case with hugepage backing. The reason for that was
that we abused the 'pagesize' variable for storing that information, but
we should rather have a separate one that specifies whether we really
need the new object for hugepage backing. And that variable should be
set only if this particular NUMA cell needs special treatment WRT
hugepages.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372153
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
