Both are supported by qemu-2.11 and later, so we don't have to check for
them explicitly.
Note that QXL is supported only on x86_64, thus on other arches only the
capability for 'virtio-gpu' is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both the QXL video device and 'virtio' video device support
'max_outputs' in all qemu versions libvirt supports. This means we no
longer have to check the QEMU_CAPS_QXL_MAX_OUTPUTS and
QEMU_CAPS_VIRTIO_GPU_MAX_OUTPUTS capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was only used to construct the hash key for the (now removed)
shared devices in the qemu driver.
Remove it and its mocking.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
No kernels supported by upstream libvirt have the feature.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This device was virtio 1.0-only so adding the (non-)transitional model
did not make sense and it was only present in QEMU 4.0.
Report a validation error for both of the users that will ever hit this
code path.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that looking up dnsmasq is handled/mocked we can start
checking whether dnsmasq capabilities were built successfully and
error out if that wasn't the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
DISCLAIMER: dnsmasq capabilities are empty as of v8.0.0-rc1~145.
In a real environment the dnsmasq capabilities are constructed
using dnsmasqCapsNewFromBinary(). We also have
dnsmasqCapsNewFromBuffer() to bypass checks that real code is
doing and just get capabilities object. The latter is used from
test suite.
However, with a little bit of mocking we can test the real life
code. All that's needed is to simulate dnsmasq's output for
--version and --help and mock a stat() that's done in
dnsmasqCapsRefreshInternal().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While it's true that our virCommand subsystem is happy with
non-absolute paths, the dnsmasq capability code is not. It stores
the path to dnsmasq within and makes it accessible via
dnsmasqCapsGetBinaryPath(). While strictly speaking no caller
necessarily needs canonicalized path, let's find dnsmasq once and
cache the result.
Therefore, when constructing the capabilities structure look up
the binary path. If DNSMASQ already contains an absolute path
then virFindFileInPath() will simply return a copy.
With this code in place, the virFileIsExecutable() check can be
removed from dnsmasqCapsRefreshInternal() because
virFindFileInPath() already made sure the binary is executable.
But introducing virFindFileInPath() means we have to mock it in
test suite because dnsmasqCaps are created in
networkxml2conftest.
Moreover, we don't need to check for dnsmasq in configure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We don't query any capabilities of dnsmasq. We are only
interested in dnsmasq's version (obtained via 'dnsmasq
--version'). Therefore, there's no point in running 'dnsmasq
--help'. Its output is not processed even.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The dnsmasqCaps type has its own cleanup function defined and
ready to use via g_autoptr(). Use automatic cleanup instead of
an explicit one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If a test binary is executed with an argument then usage
information is printed out (that no arguments are accepted and
what environment variables affect execution). The string is
printed onto stderr but it is not terminated with a newline
character producing not so nice output.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that qemu fixed device unplug when JSON syntax is used with -device
we can re-enable the feature.
Since the old capability string representation is condemned by
suggesting filtering it as a workaround we must introduce a new string.
To achieve this the original capability position is renamed to
X_QEMU_CAPS_DEVICE_JSON_BROKEN_HOTPLUG and a new position with the
original name QEMU_CAPS_DEVICE_JSON is introduced to prevent us having
to change the rest of the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to commit v6.2.0-874-g1cd2ad11d3
Notable changes are:
- added flag noting that use of JSON syntax for -device was fixed
- 'dbus' backend for graphics and character devices added
- virtio-mem added 'node' property
- 'clusters' added to CPU topology
- 'open-timeout' property for NBD protocol backend
- 'wheel-left' and 'wheel-right' event types for 'input-send-event'
- increased default resolution to '1280x800' on 'virtio-gpu'
- SGX property 'section-size' changed to 'sections' incompatibly
(unused luckily)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The machine type doesn't change the test result and prevents tests being
changed every time we are about to update real capabilities to a new
qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two tests currently that simulate QMP talk:
qemucapabilitiestest and qemuhotplugtest. In both cases they
check whether currently executed command is the one for which
reply was provided. If not an error message is reported. However,
the error message contains only the actual command and not the
expected one. This makes it harder to navigate through .replies
files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
VM XML accepts target.port but this does not get passed while
building the QEMU command line for this VM.
Signed-off-by: Divya Garg <divya.garg@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit takes care of following cases:
-> Check availability of requested ports.
->The total number of requested ports should not be more than
VIR_MAX_ISA_SERIAL_PORTS.
->The ports requested should be less than VIR_MAX_ISA_SERIAL_PORTS.
->VIR_MAX_ISA_SERIAL_PORTS should correspond to MAX_ISA_SERIAL_PORTS
specified in QEMU code commit def337ffda34d331404bd7f1a42726b71500df22.
-> Prevent duplicate device assignments to the same port.
-> In case no ports are provided in the XML, this patch scans the list of unused
isa-serial indices to automatically assign available ports for this VM.
Signed-off-by: Divya Garg <divya.garg@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When -device is configured via JSON a bug [1] is triggered in qemu were
the DEVICE_DELETED event for the removal of the device frontend is no
longer delivered to libvirt. Without the DEVICE_DELETED event we don't
remove the corresponding entries in the VM XML.
Until qemu will be fixed we must stop using the JSON syntax for -device.
This patch removes the detection of the capability. The capability is
used only during startup of a fresh VM so we don't need to consider any
compaitibility steps for existing VMs.
For users who wish to use 'libvirt-7.9' and 'libvirt-7.10' with
'qemu-6.2' there are two possible workarounds:
- filter out the 'device.json' qemu capability '/etc/libvirt/qemu.conf':
capability_filters = [ "device.json" ]
- filter out the 'device.json' qemu capability via qemu namespace XML:
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
[...]
<qemu:capabilities>
<qemu:del capability='device.json'/>
</qemu:capabilities>
</domain>
We must never again use the same capability name as we are now
instructing users to filter it as a workaround so once qemu is fixed
we'll need to pick a new capability value for it.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2036669
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2035237
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Until now we did 2 weird things when inserting the qemuCaps used for
individual test cases into the capability cache:
1) we inserted the same caps for all emulators
2) we always (expensively) copied them
Now when real capabilities are used we don't touch them at all just
simply inser them. This allows us one big optimization, by trading a
copy for just a virObjectRef as we can borrow the caps object to the
cache.
For fake caps we still copy them as we insert the fake machine types
into them, but second big optimization is to insert the capabilities
only for the architecture they belong to.
Additionally this commit also ensures that all other entries in the
cache for the binary are poisoned by empty caps so that it's obvious
that the test is doing the right thing.
Apart from this making actually more sense this shaves off more than 40%
of runtime from qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Emulator binary change is needed to use the latest caps properly. The
comment is no longer needed, the expected error is recorded in the 'err'
file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Also ensure that the emulator and architecture are correct for
DO_TEST_CAPS_LATEST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As demonstrated by the qemuxml2xmltest DO_TEST_CAPS_LATEST data based on
the 'x86-kvm-32-on-64' test case the post parse CPU selection code which
fills in the CPU into the definition does not have exactly the same
logic as we used to have when the cpu model was picked when formatting
the commandline.
Change the qemuxml2argv test to use DO_TEST_CAPS_LATEST too as it
doesn't really make sense to test this on fake data.
In addition to 'latest' versions, this also adds second invocation
locked to qemu-4.1.0 which demonstrates the old behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fake capabilities are inserted twice, as in a few tests the architecture
is not present in the XML (testing filling in of the architecture).
Since we already know which architecture will be picked we don't need to
be adding the capabilities twice.
This doesn't impact the tests as they use the same approach to determine
the default arch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will modify how we populate the capability cache in
tests to be more sane. This also means that the emulator binary and
architecture used in the test files using real capabilities must match
what the real capabilities have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will modify how we populate the capability cache in
tests to be more saner. This also means that the emulator binary and
architecture used in the test files using real capabilities must match
what the real capabilities have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The specific machine type is not important for the test. We can use 'pc'
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuxml2argv invocation of some tests used DO_TEST_CAPS_LATEST while
the qemuxml2xmltest invocation uses fake caps. Unify them on
DO_TEST_CAPS_LATEST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since introduction in fc03eb53c0 there wasn't a qemuxml2argv
version. As we are touching the files convert them to
DO_TEST_CAPS_LATEST directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to commit 5222256849 the test case was added to verify that
the '<address>' element is covered by the schema. The test was not
registered for qemuxml2argvtest though. We can use 'net-server' instead
as it has the same type. On the other hand that one was not registered
for qemuxml2xmltest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing special about the tests requiring to use very old
machine types. Most usage is cargo-culted from other tests. Switch all
the tests to use 'pc' instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For tests with fake capabilities we fill in a bunch of machine types
which the tests might use. For now there's a random collection of
machine types which are not actually used. Purge the unused ones for
non-x86 machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The two test cases were added to avoid regressions such as fixed in
17dff35848. Nowadays the code is much simpler and any Q35 machine
will trigger the explicit FDC.
Remove the '2.11' machine type version and turn the '2.9' version into a
generic q35 machine.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the fd-passing setup of chardevs which this hack meant to disable
was moved to the host-preparation phase which is skipped for formatting
of non-real commandlines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
And make callers check the return value as well. This helps error out early for
invalid environment variables.
That is desirable because it could lead to deadlocks. This can happen when
resetting logging after fork() reports translated errors because gettext
functions are not reentrant. Well, it is not limited to resetting logging after
fork(), it can be any translation at that phase, but parsing environment
variables is easy to make fail on purpose to show the result, it can also happen
just due to a typo.
Before this commit it is possible to deadlock the daemon on startup
with something like:
LIBVIRT_LOG_FILTERS='1:*' LIBVIRT_LOG_OUTPUTS=1:stdout libvirtd
where filters are used to enable more logging and hence make the race less rare
and outputs are set to invalid
Combined with the previous patches this changes
the following from:
...
<deadlock>
to:
...
libvirtd: initialisation failed
The error message is improved in future commits and is also possible thanks to
this patch.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Set a launch secret in guest memory using the sev-inject-launch-secret
QMP API. Only supported with qemu >= 6.0.0 and SEV-enabled guests in a
paused state.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'sev-inject-launch-secret' qmp command is only available with
qemu >= 6.0.0. Introduce a capability for sev-inject-launch-secret.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There's no real difference between input and output XMLs for
kvm-features and kvm-features-off test cases. Do what we usually
do in such case - turn the output file into a symlink of the
input file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Make the tpm-*.xml files symlinks to their respective input XMLs
from qemuxml2argvdata/ directory. Neither of the XMLs relies on
autofill of any TPM data.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We already have the input xml because of xml2arg test. However,
the corresponding xml2xml test case is missing. Make the expected
XML a symlink to the input XML and clean the latter up a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'qemucapabilitiesnumbering' tool now replaces the role of this
script and provides way to programmatically modify the replies file on
top.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tool is assembled from individual bits used for tests and actual
capturing of the replies files. The tool ensures correct numbering and
formatting of entries.
In normal usage mode it masks as a test which validates formatting and
numbering of the tests/qemucapabilitiesdata/*.replies files. This tool
was actually used to produce commits 096ac87a1a and aa21615ccb.
In case a manual modification of the replies file is needed the
'modify()' function provides a convenient way to do programatic
modification of the caps file.
As an example the modify() function has commented-out code which
provides a basic scaffold to do modifications along with a how-to.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the parser reusable by extracting it and making it parse into
command,reply tuples.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now know exactly which GLib version we need to depend on
for the workaround to no longer be necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
All of these are affected by the same issue as the ones that
we're already skipping during this specific time interval.
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Will keep things reasonable as we perform further code
movements.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
With 'g_strdup' not needing error handling we can ask callers to pass a
copy of the string which will be adopted by the JSON value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
QCOW2 images now support 'extended_l2' which splits the default clusters
into 32 subcluster allocation units. This allows the allocation units to
be smaller without increasing the size of L2 table too much and thus also
the cache requirements for holding the full L2 table in memory.
Unfortunately it's incompatible with qemu versions older than 5.2 thus
can't be used as default.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two functions that take variable arguments:
vshTableNew() and vshTableRowAppend(). Both expect the list of
arguments to be NULL terminated. Annotate them with
G_GNUC_NULL_TERMINATED to enable compile time check for this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In testVshTableNew() we test whether vshTableNew(NULL) allocates
a table. This is expected to fail (and return NULL), because
passing nothing but NULL to vshTableNew() is viewed as error.
Nevertheless, if vshTableNew() did not fail and returned an
allocated table it would be leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous commit, it's no longer possible to change nodeset
for strict numatune. Therefore, we can start generating
host-nodes onto command line again.
This partially reverts d73265af6e.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Under the qemucapabilitiesdata we have a replies file for
QEMU-3.0.0.ppc64. At least we think so. In fact, the file
contains replies from a development snapshot release that
predates 3.0.0 (specifically it's v2.12.0-1689-g518d23a) and as
such does not reflect any change that was made to QEMU after the
snapshot and before the official relase. One of such changes was
renaming 'exit-preconfig' command to 'x-exit-preconfig' (QEMU
commit v3.0.0-rc1~21^2~3). Ideally, we would just regenerate
capabilities using the official release but since this is a PPC64
machine and pretty old version anyway let's just fix the command
name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Set the kernel-hashes property on the sev-guest object if the config
asked for it explicitly. While QEMU machine types currently default to
having this setting off, it is not guaranteed to remain this way.
We can't assume that the QEMU capabilities were generated on an AMD host
with SEV, so we must force set the QEMU_CAPS_SEV_GUEST. This also means
that the 'sev' info in the qemuCaps struct might be NULL, but this is
harmless from POV of testing the CLI generator.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the QEMU tests a test can either use an explicitly listed set of
capabilities, or can request those matching a particular QEMU
version. Sometimes it is desirable to be able to list extra caps
on top of those implied by a particular version.
This is useful, for example, when QEMU won't report certain features
unless it was run on particular hardware or kernels, and those were
not used when a caps snapshot was imported to the libvirt source tree.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This sev-guest object property indicates whether QEMU should
expose the kernel, ramdisk, cmdline hashes to the firmware
for measurement.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A recent code movement introduced a bug which reproduces only when there
are two disks on the same bus missing the target. Improve the test case
for the missing target test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu-6.2 is out, update the caps dump for the final time.
Notable changes:
- 'unstable' feature flag for various QMP schema entries
- 'aio-max-batch' iothread property
- 'kernel-hashes' knob for the 'sev-guest' object
- 'native-hotplug' of 'pcie-root-port' is now unstable again
- 'page-sampling/dirty-ring/dirty-bitmap' mode for 'calc-dirty-rate'
- 'toolsversion' field for the 'vmdk' disk format driver
- CPU changes resulting in 'core-capability' being present on the cpu
of the machine this dump was done on
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Different CPU generations have different limits on the number
of SEV/SEV-ES guests that can be run. Since both limits come
from the same overall set, there is typically also BIOS config
to set the tradeoff betweeen SEV and SEV-ES guest limits.
This is important information to expose for a mgmt application
scheduling guests to hosts.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are limits on the number of SEV/SEV-ES guests that can
be run on machines, which may be influenced by firmware
settings. This is important to expose to users.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're only returning the set of fields needed to perform an
attestation, per the SEV API docs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reduce the scope of the variable to avoid mixing automatic and manual
cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto for dnsmasq context and remove the cmd variable.
It was unused since its introduction in:
commit 8b32c80df0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On QEMU command line it's represented by the dirty-ring-size
attribute of KVM accelerator.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Dirty ring feature was introduced in qemu-6.1.0, this patch
add the corresponding feature named 'dirty-ring', which enable
dirty ring feature when starting VM.
To enable the feature, the following XML needs to be added to
the guest's domain description:
<features>
<kvm>
<dirty-ring state='on' size='xxx'>
</kvm>
</features>
If property "state=on", property "size" must be specified, which
should be power of 2 and range in [1024, 65526].
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the currentBackend (direct vs. firewalld) setting is no longer
used for anything, we don't need to set it (either explicitly from
tests, or implicitly during init), and can completely remove it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It isn't intuitive (to me) that a test just converting xml text into
iptables commands should need to call dbus, so rather than forcing the
next person to look through the commit logs and/or run the test under
gdb to understand why this is needed, just add a short comment in the
source.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Several functions were simplified to remove the only cleanup code at
the cleanup label, making it unnecessary.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When libvirt added support for firewalld, all iptables/ebtables rules
were added via the firewalld "passthrough" API when firewalld was
enabled (the "firewalld backend"), or run directly by libvirt when
firewalld was disabled (the so-called "direct
backend"). virfirewalltest.c dutifully ran each test twice, once with
the each backend enabled.
But commit b19863640d changed the code to *always* directly run
iptables/ebtables commands, and never use the firewalld passthrough
API, effectively making the direct and firewalld backends identical,
except that when libvirt receives notice that firewalld has restarted
or reloaded its rules, the firewalld backend sends an extra "iptables
-V" command via firewalld's passthrough API (and waits for a response)
prior to running all the rest of the iptables commands directly; this
assures that a newly-restarted firewalld has finished its work on the
filter tables before libvirt starts messing with it. (Because this
code is only executed in response to an event from dbus, it isn't
tested in the unit tests).
In spite of this, we still go through all the virfirewall tests twice
though - once for the direct backend, and once for the firewalld
backend, even though these take the same codepath.
In commit b19863640d I had left this double-testing in thinking that
someday we might go back to actually doing something useful with the
firewalld backend in the course of adding support for native nftables,
but I've now realized that for the case of nftables we will be *even
more* divorced from firewalld, so there is really no point in keeping
this code around any longer. (It's likely/probable that the tests will
be done twice again in the future, but it will be enough different
that it is better to remove this code and re-implement from scratch
when adding the nftables backend, rather than trying to directly
modify the existing code and end up with something even more
confusing).
This patch eliminates all the test duplication in virfirewalltest.c,
including mocking dbus, which is unnecessary since none of the tests
use dbus (for now we ensure that by explicitly setting the virfirewall
backend to DIRECT before any of the tests have run. Eventually the
concept of a "firewalld backend" will disappear completely, but that's
for another patch.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Generating command line is pretty easy - just put tb-size=XXX
onto -accel tcg part. Note, that QEMU expects the size in MiB.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/229
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It may come handy to be able to tweak TCG options, in this
specific case the size of translation block cache size (tb-size).
Since we can expect more knobs to tweak let's put them under
common element, like this:
<domain>
<features>
<tcg>
<tb-cache unit='MiB'>128</tb-cache>
</tcg>
</features>
</domain>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After recent cleanups, there are some pointless cleanup sections.
Clean them up.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert all the functions that generate virCaps to use g_auto
and g_steal_pointer.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the backend of the TPM is a chardev we can use the common helper
to instantiate it.
This commit also ensures proper ordering so that the backend chardev is
formatted before it's being referenced.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add handling to qemuDomainDeviceBackendChardevForeachOne and callbacks
so that we can later use 'qemuBuildChardevCommand' for TPM devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the API for qemuBuildChrChardevCommand is sane enough, we can
use it to centralize formatting of '-chardev' generally.
The 'virDomainVideoDef' doesn't use 'virDomainChrSourceDef' internally so
we create it for this occasion manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add handling to qemuDomainDeviceBackendChardevForeachOne and callbacks
so that we can later use 'qemuBuildChardevCommand' for vhost-user disks
instead of a custom formatter.
Since we don't pass the FD for the vhost-user connection to qemu all of
the setup can be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was impossible to use _LATEST when commit d7c814f7f7 was modernizing
the cases as improper separation in the code caused that files were
created in the host during the testsuite run.
Now that the host manipulation when instantiating chardevs is separated
we can add the missing version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the test cases won't cause host modification we can add the
contemporary versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The opening of files for FD passing for a chardev backend was
historically done in the function which is formatting the commandline.
This has multiple problems. Firstly the function takes a lot of
parameters which need to be passed through the commandline formatters.
This made the 'qemuBuildChrChardevStr' extremely unappealing to the
extent that we have multiple other custom formatters in places which
didn't really want to use the function.
Additionally the function is also creating files in the host in certain
configurations which is wrong for a commandline formatter to do. This
meant that e.g. not all chardev test cases can be converted to use
DO_TEST_CAPS_LATEST as we attempt to use such code path and attempt to
create files outside of the test directory.
This patch moves the opening of the filedescriptors from
'qemuBuildChrChardevFileStr' into a new helper
'qemuProcessPrepareHostBackendChardevOne' which is called using
'qemuDomainDeviceBackendChardevForeach'.
To preserve test behaviour we also have another instance
'testPrepareHostBackendChardevOne' which is populating mock
filedescriptors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail at this point. Remove the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail at this point. Remove the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail at this point. Remove the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function isn't used besides tests. Since the separator parsing
capability is trivial we can keep it in place and just unexport it for
now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Forces the data to be written synchronously to both the original and the
mirrored images which ensures that the job will reach synchronized
phase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of calling virDomainDefFree() explicitly, we can annotate
variables with g_autoptr().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'g_clear_pointer(&ptr, g_hash_table_unref)' instead.
In few instances it allows us to also remove explicit clearing of
pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use separate automatically cleared variables for the x86_64 and s390
versions of the QAPI schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Additionally we no longer need the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In other places we use strspn to validate a character subset. Convert
the in-place loop and simplify the error message.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new STRLIM macro and unify it with the empty string check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The domain capabilities won't report TPM support unless SWTPM can be
initialized. To avoid relying on the swtpm install in the host, mock
the entire initialization method, since all it needs todo is return
a non-error value.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reports what TPM features QEMU supports, provided that swtpm is
installed in the host.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit bc24810c2c modified code querying blockstats to use the
'query-nodes' parameter so that we can fetch stats also for images which
are not attached to a frontend such as block copy and backup scratch
images.
Unfortunately that broke the old blockstats because if 'query-nodes' is
enabled qemu doesn't output the 'qdev' parameter which our code used for
matching to the disk and also qemu neglects to populate the frontend
stats at all so we can't even switch to using nodename for matching.
To fix this we need to do two calls, one with 'query-nodes' disabled
using the old logic to populate everything and then an additional one
which populates all the remaining images.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/246
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Erik Skultety <eskultet@redhat.com>
This reads and separates all fields from /proc/<pid>/stat or
/proc/<pid>/task/<tid>/stat as there are easy mistakes to be done in the
implementation. Some tests are added to show it works correctly. No number
parsing is done as it would be unused for most of the fields most, if not all,
of the time. No struct is used for the result as the length can vary (new
fields can be added in the future).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When active snapshot is reverted we stop CPUs in order to load the
snapshot but we never start the CPUs again.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We currently use -machine accel=XXX which is just a syntax sugar
for -accel XXX. The former doesn't allow specifying arguments for
accelerator, because all arguments passed to -machine are
treated as arguments of machine itself.
The -accel argument was introduced in QEMU commit
v2.9.0-rc0~70^2~19 and since our minimum required version is
newer (2.11.0) we can safely assume its existence and use it
without any capability.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/233
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In some cases we have a label that contains nothing but a return
statement. The amount of such labels rises as we use automagic
cleanup. Anyway, such labels are pointless and can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When guest has NUMA nodes and QEMU is new enough to report
default RAM ID then ideally we would use -numa memdev= combined
with memory-backend-* combo becasue -mem-path/-mem-prealloc/-numa
mem are deprecated. Well, there is one problem - the .memdev=
attribute is machine type dependent (just look at arguments of
virQEMUCapsGetMachineNumaMemSupported()) and to ensure backwards
compatibility we prefer -numa mem= over -numa memdev=.
But there was one corner case when -mem-prealloc was requested
but not generated on the cmd line. It all starts with
qemuBuildMemCommandLine() which generates just '-m XXX' and
because it sees defaultRAMid and guest NUMA nodes greater than
zero it does nothing more.
Then, qemuBuildNumaCommandLine() sees that -numa mem= is still
supported for given machine type and nothing else set
@needBackend thus qemuBuildMemPathStr() is called which output
-mem-prealloc only in a few cases assuming it was outputted
earlier.
Reported-by: Jing Qi <jinqi@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This test shows a bug we have: even though the XML says:
<allocation mode='immediate'/>
there is no -mem-prealloc nor .prealloc=yes anywhere on the cmd
line. This will be fixed in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a test case where 'ramfb' is explicitly disabled for a mediated
device to prevent regressing again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test filled the chardev type to VIR_DOMAIN_CHR_TYPE_FILE and thus
set the 'data.emulator.source->data.file.path' pointer, but the
commandline formatter is unconditionally expecting VIR_DOMAIN_CHR_TYPE_UNIX
and thus reading 'data.emulator.source->data.nix.path'. Since it's an
union it happened to land in the correct place. Fix the faked data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainChrSourceDef' contains private data so 'virDomainChrSourceDefNew'
must be used to allocate it. 'virDomainTPMDef' was using it directly
which won't work with the chardev helper functions.
Convert it to a pointer to properly allocate private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 65b0b746b5 changed spice tests to use latest caps. Before this
change, "FLAG_REAL_CAPS" wasn't being set in testQemuInfoInitArgs(). The
absence of this flag triggered the code path inside
testCompareXMLToArgv() that executed testUpdateQEMUCaps(). This function
will update the host CPU via virQEMUCapsUpdateHostCPUModel() into
virQEMUCapsInitHostCPUModel(). In this function,
virQEMUCapsInitCPUModel() would end up updating the hostCPU inside the
qemuCaps (via virQEMUCapsProbeHostCPU()). Before the forementioned
commit, the host CPU was being defaulted to x86_64, vendor Intel, for
the 'graphics-spice-timeout' test that is using the 'pc' machine type
and 'accel=kvm'.
Today, "FLAG_REAL_CAPS" is being set because we're using the latest caps
from x86_64. This means that the whole code path mentioned above is
skipped. qemuCaps are now being loaded via virQEMUCapsLoadCache()
directly. Without the handling being done by testUpdateQEMUCaps(), the
host CPU is being retrieved later on, down below
qemuProcessCreatePretendCmdPrepare() into qemuProcessUpdateGuestCPU().
The latter will attempt to update the domain cpu and executing a
virCPUCompare with the hostCPU and def->cpu.
All this logic ended up causing a failure of the
'graphics-spice-timeout' test in ppc64 and s390x hosts. This test is
being run with KVM acceleration, and the KVM driver for ppc64 and s390x
will return a default x86_64 CPU with vendor "AMD", making
virCPUCompare() fail with the following message:
"QEMU XML-2-ARGV graphics-spice-timeout.x86_64-latest ... libvirt: CPU
Driver error : the CPU is incompatible with host CPU: host CPU vendor does
not match required CPU vendor Intel"
Fix this test by setting cpu check='none' and avoid the virCPUCompare()
that causes the problem for ppc64 and s390x hosts.
Note that this is a build fix. A more adequate fix would be to mock the
getHost() interface of the cpuDriverX86 for non-x86 hosts, allowing
'fullCPU' to be retrieved in qemuProcessUpdateGuestCPU(), and a proper
x86 CPU to be retrieved in the scenario described above.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'-audiodev' as a modern implementation based on QAPI already takes JSON
as the argument. Convert our code to use it directly.
The declaration of the QAPI types can be found in
'qemu.git/qapi/audio.json'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch updates domaincapsdata and qemucapabilitiesdata for ppc64
with qemu commit v6.1.0-1714-gc5b2f55981.
Changes in all 'ppc64-latest.ags' files were needed. The changes are
mundane despite the volume. For all 'ppc64-latest.args' files the
changes are:
- removing '-sandbox' command line;
- 'secret' and 'memory-backend-ram' objects are now using qom-type format;
- '-device' is now using qom-type format.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To make it easier for users to figure out how the DN should be formatted.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This removes a dead link, the need for users to understand a glib function and a
improper reference to fnmatch (as we only expand asterisks to any string).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This commit doesn't aim to extinguish every VIR_FREE() call, but
only those which were touched by the previous commit. The aim is
to drop cleanup/error labels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Instead of calling qemuMonitorTestFree() explicitly, we can use
g_autoptr() and let it be called automagically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are two instances of an explicit call to
qemuMonitorCPUModelInfoFree() which in fact can be turned into
g_auto().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are a few cases where a string list is freed by an explicit
call of g_strfreev(), but the same result can be achieved by
g_atuo(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are two functions (testQemuAgentOSInfo() and
testQemuAgentTimezone()) which call virTypedParamsFree() only in
successful paths. If an error is met then those parameters would
be leaked. Fix this by placing the virTypedParamsFree() calls on
better place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Commit 88957116c9 switched to use
memory-backend-* for regular VM memory as well. That change indirectly
started using 'host-nodes' for system memory which results in QEMU
calling mbind() to bind the system memory to specific NUMA node if the
VM XML contains the configuration similar to this:
...
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
...
Once the VM was started with that configuration it was no longer
possible to change the memory NUMA nodeset.
Fixes: 677c90cc1d
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove unnecessary label and goto. This also fixes a bug where a
failure to create the table would result in the test passing.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove unnecessary label and goto. Cleanup line breaks.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend the TPM backend XML with a node 'active_pcr_banks' that allows a
user to specify the PCR banks to activate before starting a VM. Valid
choices for PCR banks are sha1, sha256, sha384 and sha512. When the XML
node is provided, the set of active PCR banks is 'enforced' by running
swtpm_setup before every start of the VM. The activation requires that
swtpm_setup v0.7 or later is installed and may not have any effect
otherwise.
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'>
<active_pcr_banks>
<sha256/>
<sha384/>
</active_pcr_banks>
</backend>
</tpm>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2016599
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is now unused.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For later QEMUs than 2.11 we do FD passing for character devices,
so lock the capabilites to this exact version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Move the test closer to other graphics-spice tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reduce the churn in following patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The formatter for the backup job data didn't pass the virDomainXMLOption
struct to the disk formatter which meant that the private data of the
disk source were not formatted.
This didn't pose a problem for now as the blockjob list remembered the
nodenames for the jobs, but the backup source lost them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For statically declared arrays one can use G_N_ELEMENTS() instead
of explicit sizeof(array) / sizeof(item). I've noticed couple of
places where the latter was used.
I am not fixing every occurrence because we have some places
which do not use glib (examples and NSS module).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In testPCIVPDResourceCustomCompareIndex() there are two variables
declared at one line. They are both g_autoptr() decorated which
makes it worse, because coccinelle fails to parse that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
This warning is emitted for pretty much every test case,
making it hard to see what the actual error is.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The test case should return -1, not 0 in case a valid resource could
not be parsed successfully but the ret value is initialized to 0.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
While invalid values need to be ignored when presenting VPD data to the
user, it would be good to attempt to parse a valid portion of the VPD
instead of marking it invalid as a whole.
Based on a mailing list discussion, the set of accepted characters is
extended to the set of printable ASCII characters.
https://listman.redhat.com/archives/libvir-list/2021-October/msg01043.html
The particular example encountered on real hardware was multi-faceted:
* "N/A" strings present in read-only fields. This would not be a useful
valid value for a field (especially if a unique serial number is
expected), however, it was decided to delegate handling of those kinds
of values to higher-level software;
* "4W/1W PCIeG2x4" - looks like some vendors use even more printable
characters in the ASCII range than we currently allow. Since the
PCI/PCIe VPD specs mention alphanumeric characters without specifying
the full character set, it looks like this is ambiguous for vendors
and they tend to use printable ASCII characters;
* 0xFF bytes present in VPD-W field values. Those bytes do not map to
printable ASCII code points and were probably used by the vendor as
placeholders. Ignoring the whole VPD because of that would be too
strict.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
* RV and RW fields must be at the last position in their respective
section (per the conditions in the spec). Therefore, the parser now
stops iterating over fields as soon as it encounters one of those
fields and checks whether the end of the resource has been reached;
* The lack of the RW field is not treated as a parsing error since we
can still extract valid data even though this is a PCI/PCIe VPD spec
violation;
* Individual fields must have a valid length - the parser needs to check
for invalid length values that violate boundary conditions of the
resource.
* A zero-length field may be the last one in the resource, however, the
boundary check is currently too strict to allow that.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
There are a lot of places where we call virInterfaceDefFree()
explicitly. We can define autoptr cleanup macro and annotate
declarations with g_autoptr() and remove plenty of those explicit
free calls.
This also fixes a memory leak in udevInterfaceGetXMLDesc() which
called virInterfaceDefFree() only in successful path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Since b2757b697e
(qemu: support kvm-pv-ipi off), libvirt supports xml definition like:
<features>
<kvm>
<pv-ipi state='off'/>
</kvm>
</features>
Add test case for this feature.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
KVM features off test cases should be tested for a KVM domain, so
keep align kvm-features-off test with kvm-features except KVM
features on/off.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting from QEMU-6.2 enum members can be deprecated. Add support to
the validator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the function to the top of the file so other functions placed
towards the top will be able to reuse it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to the new more featured way to report enum members which will
also allow us to detect use of deprecated members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU-6.2 is reporting enum values in the new 'members' array which we'll
be switching to. Rewrite the logic so that adding the new checker is
more straightforward.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v6.1.0-1735-gc52d69e7db which has Markus' patches for
improvements of enum probing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modern cpu hotplug was introduced in qemu-2.7, thus all qemu versions
actually support it. Remove the tests for the legacy hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCapabilitiesAddGuestDomain() function can't fail. It
aborts on OOM. Therefore, there's no need to check for its
return value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCapabilitiesAddGuest() function can't fail. It aborts on
OOM. Therefore, there's no need to check for its return value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For other interface type, values in tc rules are calculated by
multiply by 8*1000 instead of 8*1024.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Error messages must conform to spec as specified here:
https://www.libvirt.org/coding-style.html#error-message-format
This change makes some error messages conform to the spec above.
Fixes: 8eadf82fb5 ("conf: introduce option to enable/disable pci hotplug on pci-root controller")
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This reverts commit 58ba0f6a3d.
Conflict:
* src/qemu/qemu_capabilities.[ch]
Because other new cap flags had been added since the original
commit, reformatting was necessary to follow the "groups of
five" pattern.
* tests.qemucapabilitiesdata/caps_6.2.0.x86_64.xml
This file was added after the original commit that we
are reverting, so had to be manually edited to remove
the two capabilities.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 7300ccc9b3.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit bef0f0d8be.
Conflicts:
tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-disable.args
* this file had been renamed from its original, then renamed back,
which understandably confused git. It's being completely removed
here anyway, so the contents don't matter.
tests/qemuxml2argvtest.c
* change in context around removed chunk
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 2d20f0bb05.
Conflicts:
tests/qemuxml2argvdata/pc-i440fx-acpi-hotplug-bridge-disable.args
tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-disable.args
the test output of these files was regenerated because the tests
were changed upstream to use JSON on the commandline at a later
commit than the commit being reverted here (where they were changed
to use latest caps, but the patches to use JSON on the commandline
hadn't been committed yet).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 6414603105.
Conflicts:
tests/qemuxml2argvdata/pc-i440fx-acpi-hotplug-bridge-enable.x86_64-latest.args
tests/qemuxml2argvdata/pc-i440fx-acpi-root-hotplug-enable.x86_64-latest.args
tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-enable.x86_64-latest.args
These files are unrelated to the functionality we need to remove, so
they weren't removed, and the associated test cases weren't removed
from qemuxml2argvtest.c
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit da896d440c.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 618e8665db.
This is the first in a series of 10 commits that revert (in reverse
order) the changes to add the <acpi-hotplug-bridge state='on|off'/>
switch to libvirt domain XML, which unfortunately needs to be removed
due to QEMU developers discovering a flaw with the design of the QEMU
commandline switch used to implement the libvirt switch that will
likely result in a new and different method of selecting hotplug
modes. Because the libvirt switch has not been in any official
releases of libvirt, we are still able to remove it completely, rather
than deprecating it.
The original commits began with commit
58ba0f6a3d. The other original commit
IDs are documented in each revert commit.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This commit extends libvirt XML configuration to support luks2 encryption format.
This means that <encryption format="luks2" engine="librbd"> becomes valid.
Currently librbd is the only engine that supports this new format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
rbd encryption is new in qemu 6.1.0.
This commit adds a new encryption engine property which
allows the user to use this new encryption engine.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit extends libvirt XML configuration to support a custom encryption engine.
This means that <encryption format="luks" engine="qemu"> becomes valid.
The only engine for now is qemu. However, a new engine (librbd) will be added in an upcoming commit.
If no engine is specified, qemu will be used (assuming qemu driver is used).
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
rbd encryption is new in qemu 6.1.0.
This commit adds capability probing for it.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The post parse callback is part of the real (non-test) processing flow.
This commit adds it (for disks) to the qemublocktest flow as well.
Specifically, this will be needed for tests that use luks encryption,
so that the default encryption engine (which is added in an upcoming commit)
will be overridden by qemu.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a few places we declare a variable (which is optionally
followed by a code not touching it) then set the variable to a
value and return the variable immediately. It's obvious that the
variable is needless and the value can be returned directly
instead.
This patch was generated using this semantic patch:
@@
type T;
identifier ret;
expression E;
@@
- T ret;
... when != ret
when strict
- ret = E;
- return ret;
+ return E;
After that I fixed couple of formatting issues because coccinelle
formatted some lines differently than our coding style.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of "unsupported" test case is to check whether our code
handles 'CommandNotFound' error returned for
'query-migrate-parameters' monitor command. Well, the command is
pretty old and every QEMU that we are dealing with supports it.
Thus this test case is useless. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
* XML serialization and deserialization of PCI VPD;
* PCI VPD capability flags added and used in relevant places;
* XML to XML tests for the added capability.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Add helper functions to virpci to provide means of checking for a VPD
file presence and for VPD resource retrieval using the PCI VPD parser.
The added test assesses the basic functionality of VPD retrieval while
the full parser is tested by virpcivpdtest.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Add support for deserializing the binary PCI/PCIe VPD format and storing
results in memory.
The VPD format is specified in "I.3. VPD Definitions" in PCI specs
(2.2+) and "6.28.1 VPD Format" PCIe 4.0. As section 6.28 in PCIe 4.0
notes, the PCI Local Bus and PCIe VPD formats are binary compatible
and PCIe 4.0 merely started incorporating what was already present in
PCI specs.
Linux kernel exposes a binary blob in the VPD format via sysfs since
v2.6.26 (commit 94e6108803469a37ee1e3c92dafdd1d59298602f) which requires
a parser to interpret.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
These were generated using a QEMU binary built from commit
v6.1.0-1552-g362534a643
Notably, this causes the arguments of -device to be generated
in JSON format.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some guest features that map to the -cpu arg are still added using
implicit syntax "feature" which is a deprecated shorthand for
"feature=on".
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -cpu arg gained support for feature=on|off syntax for the x86
emulator in 2.4.0
commit 38e5c119c2925812bd441450ab9e5e00fc79e662
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Mon Mar 23 17:29:32 2015 -0300
target-i386: Register QOM properties for feature flags
Most other targets gained this syntax even earlier in 1.4.1
commit 1590bbcb02921dfe8e3cf66e3a3aafd31193babf
Author: Andreas Färber <afaerber@suse.de>
Date: Mon Mar 3 23:33:51 2014 +0100
cpu: Implement CPUClass::parse_features() for the rest of CPUs
CPUs who do not provide their own implementation of feature parsing
will treat each option as a QOM property and set it to the supplied
value.
There appears no reason to keep supporting "+|-feature" syntax,
given the current minimum QEMU version.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU switched from using underscores in x86 CPU features to hyphens
in the 2.8.0 series with two commits
commit fc7dfd205f3287893c436d932a167bffa30579c8 (HEAD, refs/bisect/bad)
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:40 2016 -0300
target-i386: Remove underscores from feat_names arrays
commit 54b8dc7c19cd781e96f1e9b001ca6001d804eb19
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:38 2016 -0300
target-i386: Register aliases for feature names with underscores
Libvirt names use underscores so we conditionally tranlate the
names when talking to new QEMU. Since the min QEMU was raised to
version 2.11.0, all QEMU versions we talk to expect hypens, so
the translation can be done unconditionally.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU switched from using underscores in x86 CPU features to hyphens
in the 2.8.0 series with two commits
commit fc7dfd205f3287893c436d932a167bffa30579c8 (HEAD, refs/bisect/bad)
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:40 2016 -0300
target-i386: Remove underscores from feat_names arrays
commit 54b8dc7c19cd781e96f1e9b001ca6001d804eb19
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:38 2016 -0300
target-i386: Register aliases for feature names with underscores
Libvirt names use underscores so we conditionally tranlate the
names when talking to new QEMU. Since the min QEMU was raised to
version 2.11.0, all QEMU versions we talk to expect hypens, so
the translation can be done unconditionally.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All (proper) callers pass true so we can remove the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we use JSON with -device we can validate it at least partially
(since the schema for 'device_add' is for now incomplete) against the
QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with QEMU-6.2 started accepting a JSON object as argument for
'-device' which will also become the only syntax considered stable by
qemu in the future.
Since libvirt was recently converted to generate the properties via JSON
to begin wit we can start using it on the commandline as well, by simply
enabling the QEMU_CAPS_DEVICE_JSON capability, which we do by probing
for the 'json-cli' feature flag of 'device_add'.
Normally a change which changes a commandline output should be happening
only after the impacted real-caps test files are forked in the version
preceding the change, but in this case it's not necessary as the logic
for generating the device properties stays identical and we just change
the output format (avoid conversion). Additionally we still have a lot
of tests validating the conversion to the old commandline options.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'allowIncomplete' argument of testQEMUSchemaValidateCommand to
validate at least properties which are already described by the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP schema for 'device_add' is not complete yet. Allow validation of
incomplete schema so that we can enable at least some validation. Once
there's more schema in the future all present members are still
validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v6.1.0-1510-gc148a05721 which most notably adds the 'json-cli'
feature for 'device_add' QMP command meaning that -device accepts JSON.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our general pattern is to initialize @ret to -1 and set it to 0
only at the end of a function. Some functions in
objecteventtest.c do not follow this pattern.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The sole purpose of the lifecycleEventCounter_reset() function is
to zero out given lifecycleEventCounter struct. Well, we can let
the compiler zero it out when declaring a variable and just
remove the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
In this commit, add capability flag for query-dirty-rate first.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The aim of virNetSocketNewConnectCommand() is to execute passed
command and attach socket pair/pipe to it so that client socket
can be opened (this is used for connections with alternative
transports, e.g. ssh). The virCommand is created in a caller and
then passed to virNetSocketNewConnectCommand() where it is freed
using virCommandFree(). This approach is wrong on two levels:
1) The deallocation happens on a different level than allocation,
2) There's a WIN32 stub that just reports an error and doesn't
free the command.
However, with g_autoptr() trickery the command can be freed in
caller.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,ats=. Since the property was introduced in QEMU commit
v2.9.0-rc0~162^2~32 we can safely assume the property is always
present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some tests cases in qemuxml2argvtest that aim to check
whether our validator rejects <driver ats=''/> when
QEMU_CAPS_VIRTIO_PCI_ATS capability is not present. Well, such
scenario can't happen really because the capability will always
be present.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,iommu_platform=. Since the property was introduced in
QEMU commit v2.9.0-rc0~162^2~37 we can safely assume the property
is always present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some tests cases in qemuxml2argvtest that aim to check
whether our validator rejects <driver iommu=''/> when
QEMU_CAPS_VIRTIO_PCI_IOMMU_PLATFORM capability is not present.
Well, such scenario can't happen really because the capability
will always be present.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are a few files containing expected output for test cases
that no longer exist. Remove them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The data is based on commit v6.1.0-1313-gc09124dcb8
Notable changes:
- New machine types for the 6.2 cycle were added
- MEM_UNPLUG_ERROR event was deprecated and replaced by
DEVICE_UNPLUG_GUEST_ERROR
- Intel SGX related commands and devices added
- 'copy-before-write' blockdev filter was added
- 'memory-backend-epc' was added
- new cpu flags
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We control only the 'tpmdev' property of TPM devices which is a string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We control the following properties of the devices in question:
'virtio-gpu'
virgl=<bool> - on/off (default: true)
'qxl'
ram_size=<uint32> - (default: 67108864)
vram_size=<uint64> - (default: 67108864)
vram64_size_mb=<uint32> - (default: 4294967295)
vgamem_mb=<uint32> - (default: 16)
max_outputs=<uint16> - (default: 0)
'vhost-user-gpu'
max_outputs=<uint32> - (default: 1)
chardev=<string>
'VGA'
vgamem_mb=<uint32> - (default: 16)
'bochs-display'
vgamem=<size> - (default: 16777216)
common for all devices:
xres=<uint32> - (default: 0)
yres=<uint32> - (default: 0)
The only noticable change is using memory size in bytes for
'bochs-display' instead of kibibytes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the old-style 'device_add' helpers which parse the commandline
arguments to JSON since we now coverted all usage to use JSON directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Build commandlines for character devices via JSON.
For devices using 'VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_SERIAL' address
type 'qemuBuildDeviceAddressProps' will now generate the address. The
only special property is 'nr'. QEMU declares it as:
nr=<uint32> - (default: 4294967295)
The test fallout is caused by formatting addresses as decimal numbers
instead of hex as described in the commit which added
'qemuBuildDeviceAddressProps'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the validation code into a separate function. For now the
validation is still kept in the commandline format step as simply just
moving it to the validator causes failures in the test suite, which will
need to be investigated deeper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally format the PCI controller properties into JSON, but convert
it back to a string so that we for now change just the SCSI controller.
The change in tests is expected as the 'port' field for various PCI
controllers is expected to be a number and thus can't be represented as
a hexadecimal value in JSON.
QEMU expects the following types:
'pci-bridge'
chassis_nr=<uint8> - (default: 0)
'pxb-pcie':
bus_nr=<uint8> - (default: 0)
'pcie-root-port'
port=<uint8> - (default: 0)
chassis=<uint8> - (default: 0)
hotplug=<bool> - (default: true)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally format the SCSI controller properties into JSON, but convert
it back to a string so that we for now change just the SCSI controller.
The change in tests is expected as the 'reg' field for a spapr-vio
address is expected to be a number:
$ qemu-system-ppc64 -device spapr-vscsi,help
spapr-vscsi options:
reg=<uint32> - (default: 4294967295)
The hand-rolled generator used hex representation but that will not be
possible on the monitor via JSON.
The properties of 'virtio-scsi' have following types according to QEMU:
iothread=<link<iothread>>
num_queues=<uint32> - (default: 4294967295)
cmd_per_lun=<uint32> - (default: 128)
max_sectors=<uint32> - (default: 65535)
ioeventfd=<bool> - on/off (default: true)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the bootindex before the address so that the code is simpler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The types for the special fields of the 'virtio-blk-pci' according to
QEMU are:
iothread=<link<iothread>>
ioeventfd=<bool> - on/off (default: true)
event_idx=<bool> - on/off (default: true)
scsi=<bool> - on/off (default: false)
num-queues=<uint16> - (default: 65535)
queue-size=<uint16> - (default: 256)
For all disks we also use the following properties (based on 'scsi-hd'):
device_id=<str>
share-rw=<bool> - (default: false)
drive=<str> - Node name or ID of a block device to use as a backend
chardev=<str> - ID of a chardev to use as a backend <- vhost-user-blk-pci
bootindex=<int32>
logical_block_size=<size> - A power of two between 512 B and 2 MiB (default: 0)
physical_block_size=<size> - A power of two between 512 B and 2 MiB (default: 0)
wwn=<uint64> - (default: 0)
rotation_rate=<uint16> - (default: 0)
vendor=<str>
product=<str>
removable=<bool> - on/off (default: false)
write-cache=<OnOffAuto> - on/off/auto (default: "auto")
cyls=<uint32> - (default: 0)
heads=<uint32> - (default: 0)
secs=<uint32> - (default: 0)
bios-chs-trans=<BiosAtaTranslation> - Logical CHS translation algorithm, auto/none/lba/large/rechs (default: "auto") <- ide-hd
serial=<str>
werror=<BlockdevOnError> - Error handling policy, report/ignore/enospc/stop/auto (default: "auto")
rerror=<BlockdevOnError> - Error handling policy, report/ignore/enospc/stop/auto (default: "auto")
The 'wwn' field is changed from a hex string to a number since qemu
actually treats it as a number.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'deflate-on-oom' and 'free-page-reporting' before the address
to simplify the genrator code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Merge the code from qemuBuildVirtioOptionsStr so that we don't have to
call two separate functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The same test in regards to the 'panic' device is the 'panic-double'
case, thus panic-isa can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The returned argument list is a NULL-terminated string list and the only
caller doesn't use the count. Remove the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prevent duplication of code when extending the validator for new
commands. Add a struct describing a command to validate and make the
validation loop a bit more robust to corner cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The -netdev formatter code switched to a real virQEMUCaps flag so we can
remove the old flags which used to enable JSON for -netdev for
validation purposes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base the validation on presence of JSON as we do with other validated
commands. This will prepare the code for a refactor so that it's the
same for all validated commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 58ba0f6a3d added a capability which
is supported by all qemu versions we support. Remove it and the
associated dead code. Since the capability isn't present in any upstream
release we can delete it completely.
Specifically the commit itself states that it was introduced "around
(qemu) 2.1". The rest of the code handles properly that the feature is
used only on x86 with the i440fx machine so the capability is pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have input files for those, provide also xml2argv testing since we
have them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use real example configs to prove the support without the
need for using fake capabilities. Fix the recently added test cases.
The negative case for 'pc-i440fx-acpi-hotplug-bridge-disable' is removed
completely as there is no real qemu libvirt supports which wouldn't
have the capability.
The input file for the negative test on aarch64 is modified so that it's
actually a reasonably valid VM config.
Fixes: bef0f0d8be
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use two real example configs to prove the support without the
need for using fake capabilities. Fix the recently added test cases.
Fixes: 133d7983d6
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This change adds backend qemu command line support for new libvirt
global feature 'acpi-bridge-hotplug'. This option can be used as
following:
<feature>
<pci>
<acpi-bridge-hotplug state='off|on'/>
</pci>
</feature>
The '<pci>' sub-element under '<feature>' is also newly introduced.
'acpi-bridge-hotplug' turns on the following command line option to
qemu for x86 guests:
(pc): -global PIIX4_PM.acpi-pci-hotplug-with-bridge-support=<off|on>
(q35): -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=<off|on>
This change also adds the required qemuxml2argv unit tests in order to
test correct qemu arguments. Unit tests have also been added to test
qemu capability validation checks as well as checks for using this
option with the right architecture.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This change introduces a new libvirt sub-element <pci> under
<features> that can be used to configure all pci related features.
Currently the only sub-sub element supported by this sub-element is
'acpi-bridge-hotplug' as shown below:
<features>
<pci>
<acpi-bridge-hotplug state='on|off'/>
</pci>
</features>
The above option is only available for the QEMU driver, for x86 guests
only. It is a global option, affecting all PCI bridge controllers on
the guest.
The 'acpi-bridge-hotplug' option enables or disables ACPI hotplug
support for cold-plugged pci bridges. Examples of bridges include the
PCI-PCI bridge (pci-bridge controller) for pc (i440fx) machinetypes,
or PCIe-PCI bridges and pcie-root-port controllers for q35
machinetypes.
For pc machinetypes in x86, this option has been available in QEMU
since version 2.1. Please see the following changes in qemu repo:
9e047b982452c6 ("piix4: add acpi pci hotplug support")
133a2da488062e ("pc: acpi: generate AML only for PCI0 devices if PCI
bridge hotplug is disabled")
For q35 machinetypes, this was introduced in QEMU 6.1 with the
following changes in qemu repo:
(a) c0e427d6eb5fef ("hw/acpi/ich9: Enable ACPI PCI hot-plug")
(b) 17858a16950860 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on
Q35")
The reasons for enabling ACPI based hotplug for PCIe (q35) based
machines (as opposed to native hotplug) are outlined in (b). There are
use cases where users would still want to use native
hotplug. Therefore, this config option enables users to choose either
ACPI based hotplug or native hotplug for bridges (for example for pcie
root port controller in q35 machines).
Qemu capability validation checks have also been added along with
related unit tests to exercise the new conf option.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
qemu added support for i440fx specific global boolean flag
PIIX4_PM.acpi-pci-hotplug-with-bridge-support
around version 2.1. This flag is enabled by default. When disabled, it
turns off acpi pci hotplug for cold plugged pci bridges in i440fx
machine types.
Very recently, in qemu version 6.1, the same global option was also
added for q35 machine types as well.
ICH9-LPC.acpi-pci-hotplug-with-bridge-support
This option turns on or off acpi based hotplug for cold plugged pcie
bridges like pcie root ports. This flag is also enabled by
default. Please refer to the following qemu changes:
c0e427d6eb5fef ("hw/acpi/ich9: Enable ACPI PCI hot-plug")
17858a16950860 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
This patch adds the corresponding qemu capabilities in libvirt. For
i440fx, the capability is detected as
QEMU_CAPS_PIIX_ACPI_HOTPLUG_BRIDGE. For q35, the capability is
detected as QEMU_CAPS_ICH9_ACPI_HOTPLUG_BRIDGE.
Please note that the test specific qemu capabilities .replies files
has already been updated as a part of regular refreshing them when a
new qemu version is released. Hence, no updates to those files are
required.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
Reconstruct the socket path from priv->libDir in every user.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The mocked path in the test suite is not in sync with what libvirtd
generates.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The commit adding the vhost-user-fs device forgot to format
the device's alias on the command line.
Thankfully it was not needed yet because virtiofs migration
is not yet supported, but it will be needed in the future
to allow hot(un)plug.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability name piix4-acpi-root-hotplug-en is not conventional and
appreared to be confusing to some. "en" suffix is also incorrect as the
capability in qemu is used to both enable and disable hotplug on the pci root
bus on the i440fx. Hence, rename it to piix4.acpi-root-pci-hotplug so that it
is clearer, less confusing and more accurate.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This change adds qemu backend command line support for enabling or disabling
hotplug on the pci-root controller using the 'target' sub-element of the
pci-root controller as shown below:
<controller type='pci' model='pci-root'>
<target hotplug='off'/>
</controller>
'<target hotplug='off/on'/>' is only valid for pc (i440fx-based x86)
machinetypes and turns on the following command line option that is passed
to qemu for x86 guests:
-global PIIX4_PM.acpi-root-pci-hotplug=<off/on>
Before introduction of this attribute, hotplug was always enabled for
pci-root of an i440fx-based machinetype, and since its introduction
the default setting has always been "on" for those machinetypes.
This change also adds the required qemuxml2argv unit tests in order to test
correct qemu arguments. Unit tests have also been added to test qemu capability
validation checks.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This change introduces libvirt xml support to enable/disable hotplug on the
pci-root controller. It adds a 'target' subelement for the pci-root controller
with a 'hotplug' property. This property can be used to enable or disable
hotplug for the pci-root controller. For example, in order to disable hotplug
on the pci-root controller, one has to use set '<target hotplug='off'>' as
shown below:
<controller type='pci' model='pci-root'>
<target hotplug='off'/>
</controller>
'<target hotplug='on'>' option would enable hotplug for pci-root controller.
This is also the default value. This option is only available for pc machine
types and is applicable for qemu/kvm accelerator only.This feature was
introduced from qemu version 5.2 with the following change in qemu repository:
3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus")
The above qemu commit describes some reasons why users might to disable hotplug
on PCI root buses.
Related unit tests to exercise the new conf option has also been added.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The following change in qemu added support for a global boolean flag specific
to i440fx machines that would turn off or on acpi based hotplug for pci root
bus:
3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus")
The option is passed as "-global PIIX4_PM.acpi-root-pci-hotplug=on" etc in qemu
commandline. It is enabled by default. This patch adds the corresponding qemu
capabilities in libvirt as QEMU_CAPS_PIIX_ACPI_ROOT_PCI_HOTPLUG.
Please note that the test specific qemu capabilities .replies files has already
been updated as a part of regular refreshing them when a new qemu version is
released. Hence, no updates to those files are required.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
Nothing special is happening here. All important changes were
done when for 'virtio-pmem' (adjusting the code to put virtio
memory on PCI bus, generating alias using
qemuDomainDeviceAliasIndex(). The only bit that might look
suspicious is no prealloc for virtio-mem. But if you think about
it, the whole purpose of this device is to change amount of
memory exposed to guest on the fly. There is no point in locking
the whole backend in memory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtio-mem is paravirtualized mechanism of adding/removing
memory to/from a VM. A virtio-mem-pci device is split into blocks
of equal size which are then exposed (all or only a requested
portion of them) to the guest kernel to use as regular memory.
Therefore, the device has two important attributes:
1) block-size, which defines the size of a block
2) requested-size, which defines how much memory (in bytes)
is the device requested to expose to the guest.
The 'block-size' is configured on command line and immutable
throughout device's lifetime. The 'requested-size' can be set on
the command line too, but also is adjustable via monitor. In
fact, that is how management software places its requests to
change the memory allocation. If it wants to give more memory to
the guest it changes 'requested-size' to a bigger value, and if it
wants to shrink guest memory it changes the 'requested-size' to a
smaller value. Note, value of zero means that guest should
release all memory offered by the device. Of course, guest has to
cooperate. Therefore, there is a third attribute 'size' which is
read only and reflects how much memory the guest still has. This
can be different to 'requested-size', obviously. Because of name
clash, I've named it 'current' and it is dealt with in future
commits (it is a runtime information anyway).
In the backend, memory for virtio-mem is backed by usual objects:
memory-backend-{ram,file,memfd} and their size puts the cap on
the amount of memory that a virtio-mem device can offer to a
guest. But we are already able to express this info using <size/>
under <target/>.
Therefore, we need only two more elements to cover 'block-size'
and 'requested-size' attributes. This is the XML I've came up
with:
<memory model='virtio-mem'>
<source>
<nodemask>1-3</nodemask>
<pagesize unit='KiB'>2048</pagesize>
</source>
<target>
<size unit='KiB'>2097152</size>
<node>0</node>
<block unit='KiB'>2048</block>
<requested unit='KiB'>1048576</requested>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</memory>
I hope by now it is obvious that:
1) 'requested-size' must be an integer multiple of
'block-size', and
2) virtio-mem-pci device goes onto PCI bus and thus needs PCI
address.
Then there is a limitation that the minimal 'block-size' is
transparent huge page size (I'll leave this without explanation).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks whether memory-backend-* supports .reserve
attribute which is going to be important for backends associated
with virtio-mem devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>