Mostly code motion to move nwfilterConnectListNWFilters into nwfilterobj.c
and rename to virNWFilterObjGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Mostly code motion from nwfilter_driver to virnwfilterobj with one caveat
to add the virNWFilterObjListFilter typedef and pass it as an 'aclfilter'
argument to allow for future possible test driver adjustments to count
the number of filters (similar to how node device has done this).
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1420740
If the parent is not a scsi_host, then we can just happily return since
we won't be removing a vport.
Fixes a bug with the following output:
$ virsh pool-destroy host4_hba_pool
error: Failed to destroy pool host4_hba_pool
error: internal error: Invalid adapter name 'pci_0000_10_00_1' for SCSI pool
$
https://bugzilla.redhat.com/show_bug.cgi?id=1233129
The virStoragePoolObjSourceFindDuplicate logic used by PoolCreateXML
and PoolDefineXML avoids comparing the new definition against "other"
pool types. This can cause unexpected corruption if two different pool
source types used the same source device path. For example, a 'disk'
pool using source type device=/dev/sdc could be unwittingly overwritten
by using /dev/sdc for a 'logical' pool which also uses the source
device path.
So rather than blindly ignoring those checks when def->type !=
pool->def->type - have the pool->def->type switch logic handle the
check for which def->type's should be checked.
Refactor virStoragePoolObjSourceFindDuplicate into smaller units
separated by the "supported" pool source type. The ISCSI, FS,
LOGICAL, DISK, and ZFS pools can use "<source>... <device='%s'/>...
</source>".
Alter the logic slightly to return the matching pool or NULL rather
than setting matchpool = pool and break. Easier to read that way.
In the effort to reduce the virStoragePoolObjSourceFindDuplicate logic,
create a new helper which will handle all the ISCSI type differences.
Alter things just a little bit to return NULL or pool rather than
using breaks and matchpool = pool, then break. Also rather than creating
variables withing the if...else if... conditions, have them all at the
top of the function to make things a bit easier to read.
Refactor virStoragePoolObjSourceFindDuplicate into smaller units
separated by the "supported" pool source type. The DIR, GLUSTER,
and NETFS pools all can use "<source>... <dir='%s'/>... </source>".
Alter the logic slightly to return the matching pool or NULL rather
than setting matchpool = pool and break. Easier to read that way.
The property is necessary also for the disk using the source (e.g. cdrom)
which needs to be kept readonly.
Commit '462c4b66' was a bit too aggressive in this aspect, since the
readonly flag is set only while parsing.
Mostly code motion to move storageConnectList[Defined]StoragePools
and similar test driver code into virstorageobj.c and rename to
virStoragePoolObjGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOf[Defined]StoragePools API into virstorageobj.c from
storage_driver and test_driver. The only real difference between the
two is the test driver doesn't call using the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Mostly code motion to move storagePoolListVolumes code into virstorageobj.c
and rename to virStoragePoolObjVolumeGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOfVolumes API into virstorageobj.c from storage_driver and
test_driver. The only real difference between the two is the test driver
doesn't call using the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit 14319c81a0 introduced CPU host model in domain capabilities
and the *hostmodel* variable is always filled by virCPUDefCopy()
and needs to be freed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
For both virNodeDeviceObjNumOfDevices and virNodeDeviceObjGetNames, the
check should be if the aclfilter doesn't exist or if it does exist, then
it must pass
Unify the *ListDevice API into virnodedeviceobj.c from node_device_driver
and test_driver. The only real difference between the two is that the test
driver doesn't call the aclfilter API. The name of the new API follows that
of other drivers to "GetNames".
NB: Change some variable names to match what they really are - consistency
with other drivers. Also added a clear of the input names.
This also allows virNodeDeviceObjHasCap to be static to virnodedeviceobj
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOfDevices API into virnodedeviceobj.c from node_device_driver
and test_driver. The only real difference between the two is that the test
driver doesn't call the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unlike other drivers, this is a test driver only API. Still combining
the logic of testConnectListInterfaces and testConnectListDefinedInterfaces
makes things a bit easier in the long run.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unlike other drivers, this is a test driver only API. Still combining
the logic of testConnectNumOfInterfaces and testConnectNumOfDefinedInterfaces
makes things a bit easier in the long run.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If formatting NUMA topology fails, the function returns immediatelly,
but the buffer structure allocated on the stack references lot of
heap-allocated memory and that would get lost in such case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Even though the virMacMap object is not necessarily created at
the same time as the network object, the former makes no sense
without the latter and thus should be unref'd in the network
object dispose function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, if we want to zero out disk source (e,g, due to
startupPolicy when starting up a domain) we use
virDomainDiskSetSource(disk, NULL). This works well for file
based storage (storage type file, dir, or block). But it doesn't
work at all for other types like volume and network.
So imagine that you have a domain that has a CDROM configured
which source is a volume from an inactive pool. Because it is
startupPolicy='optional', the CDROM is empty when the domain
starts. However, the source element is not cleared out in the
status XML and thus when the daemon restarts and tries to
reconnect to the domain it refreshes the disks (which fails - the
storage pool is still not running) and thus the domain is killed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far our code is full of the following pattern:
dom = virGetDomain(conn, name, uuid)
if (dom)
dom->id = 42;
There is no reasong why it couldn't be just:
dom = virGetDomain(conn, name, uuid, id);
After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since commit fcbbb28 we steal the pointer to the storage pool
source name if there was no pool name specified.
Properly duplicate the string to avoid freeing it twice.
https://bugzilla.redhat.com/show_bug.cgi?id=1436400
This reverts commit ca4515d2639057020c749470f390fe1f5981e91e
which also included a functional change that broke logical storage pools
not named after their volume groups.
https://bugzilla.redhat.com/show_bug.cgi?id=1398087
Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.
Also modify the storage pool XML parsing algorithm to check for the
mismatched "name" and "source-name".
While parsing if the storage source is not present, then a defaultFormat
was not set. This could lead to oddities such as seeing "unknown" format
in output for the "logical" pool even though the only format the pool could
support would be "lvm2".
This does "put a label" on other pool defaults as follows:
File System: FS_AUTO
Network File System: NETFS_AUTO
Disk: UNKNOWN
Each of which is the "0" value for their respective pools and thus
would be no "real" change.
The frequency is documented and formatted as an attribute of the <timer>
element rather than a nested <frequency> element expected by the parser.
Luckily enough, timer frequency has not been used by any driver so far.
And users were not able to set it in the XML either.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This is the maximum for many reasons, for starters because index ==
bus number, and a controller's bus number is 8 bits.
This incidentally resolves: https://bugzilla.redhat.com/1329090
This merely introduces virDomainHostdevMatchSubsysMediatedDev method that
is supposed to check whether device being cold-plugged does not already
exist in the domain configuration.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
A mediated device will be identified by a UUID (with 'model' now being
a mandatory <hostdev> attribute to represent the mediated device API) of
the user pre-created mediated device. We also need to make sure that if
user explicitly provides a guest address for a mdev device, the address
type will be matching the device API supported on that specific mediated
device and error out with an incorrect XML message.
The resulting device XML:
<devices>
<hostdev mode='subsystem' type='mdev' model='vfio-pci'>
<source>
<address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'>
</source>
</hostdev>
</devices>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Just to make the code a bit cleaner, move hostdev specific post parse
code to its own function just in case it grows in the future.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Just a tiny wrapper over the SCSI def clearing logic to drop some
if-else branches from a switch, mainly because extending the switch in
the future would render the current code with branching less readable.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Enforce virDomainHostdevSubsysType checking during compilation. Again,
one of a few spots in our code where we should enforce the typecast to
the enum type, thus not forgetting to update *all* switch occurrences
dealing with the give enum.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This way more drivers can utilize the functionality without copying
the code. And we can therefore test it in one place for all of them.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no "node driver" as there was before, drivers have to do
their own ACL checking anyway, so they all specify their functions and
nodeinfo is basically just extending conf/capablities. Hence moving
the code to src/conf/ is the right way to go.
Also that way we can de-duplicate some code that is in virsysfs and/or
virhostcpu that got duplicated during the virhostcpu.c split. And
Some cleanup is done throughout the changes, like adding the vir*
prefix etc.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Guests are handled in callers, but if something goes wrong (when it
cannot be added to virCapabilities, for example), there's no way for
them to free it properly.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
