proxy/libvirt_proxy.c qemud/Makefile.am qemud/conf.c qemud/conf.h
qemud/dispatch.c qemud/internal.h qemud/protocol.h
src/driver.h src/internal.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/proxy_internal.h src/qemu_internal.c
src/test.c src/virsh.c src/virterror.c src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xm_internal.c
src/xml.h src/xs_internal.c: applied patch from Richard Jones
adding virConnectGetCapabilities(), plus various small little
fixes
* docs/*: fixed the api extractor script and regenerated
Daniel
to better handle the case where there is no limit in the domain
upper memory size
* docs/architecture.html docs/format.html docs/intro.html
docs/libvir.html: started to update the documentation to reflect
the current state
Daniel
src/Makefile.am src/libvirt.c src/qemu_internal.c src/test.c
src/xen_internal.c src/xen_internal.h src/xend_internal.c
src/xm_internal.c src/xml.c src/xs_internal.c
tests/Makefile.am tests/sexpr2xmltest.c tests/xmconfigtest.c:
allow selective compilation of Xen,QEmu/KVM and test support
in or out at configure time. Also allows to compile on a system
without Xen development installed. All drivers are selected by
default.
Daniel
add a check for minimal size of Xen Dom0, track places where we
had arbitrary minimal memory requirement and use a predefined
macro to clean this up.
Daniel
src/driver.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/qemu_internal.c src/test.c src/virsh.c
src/xen_internal.c src/xen_internal.h src/xend_internal.c
src/xm_internal.c src/xs_internal.c: applied patch from
Masayuki Sunou to add and entry point to check the maximum
number of virtual CPU supported by a virtualization mechanism
* doc/*.html doc/libvirt-*.xml: regenerated the interfaces descriptions
and associated docs.
Daniel
* libvirt.spec.in: BuildRequires: /sbin/iptables and
run configure with the --with-init-script and
--with-qemud-pid-file parameters.
* configure.in: it's --with-qemud-pid-file, not
--with-pid-file
* acinclude.m4: add LIBVIRT_COMPILE_WARNINGS, copied from
GNOME but with a few more flags we'd been using.
* configure.in: use that instead of setting CFLAGS
directly.
* proxy/Makefile.am, python/Makefile.am, qemud/Makefile.am,
src/Makefile.am, tests/Makefile.am: use $(WARN_CFLAGS)
* qemud/conf.c: check for malloc failure in GenerateXML()
and GenerateNetworkXML()
* qemud/driver.c: free the XML output after returning it
from the DumpXML() commands.
* qemud/libvirtd.in: add init script for libvirt_qemud
* qemud/Makefile.am: install it unless we were configured
with --with-init-scripts=none
* configure.in: add --with-init-scripts to allow us
have different flavour init scripts
* qemud/qemud.c: add --pid-file and default to writing
out a PID file to /var/run/libvirt_qemud.pid in daemon
mode.
* configure.in: add --with-pid-file arg
* qemud/Makefile.am: install libvirt_qemud in /usr/sbin
instead of /usr/libexec
* src/Makefile.am, src/qemu_internal.c: pass the correct
path to libvirt
* qemud/internal.h: put the config directory paths in
an array in order to make them easier to initialize,
but still expose pointers to each of them as members
in the server struct.
* qemud/qemud.c: cleanup the config directory path
initialization.
* qemud/driver.c: maintain the autostart flag on disk
using symlinks from the "autostart" directories to
the corresponding config files.
* qemud/internal.h: add paths to the autostart links
to the vm/network structures and paths to the autostart
dirs to the server struct.
* qemud/qemud.c: initialize the server autostart dir
patches.
* qemud/conf.h: expose qemudEnsureDir()
* qemud/conf.c: check the autostart symlinks when
loading config files at startup.
* qemud/protocol.h: add the (domain/network)(Get/Set)Autostart
requests and replies to the protocol.
* src/qemu_internal.c: hookup the qemu driver autostart
methods
* qemud/dispatch.c, qemud/driver.[ch], internal.h: add
the daemon side, but just set an in-memory autostart
flag for now.
* include/libvirt/libvirt.h.in, src/libvirt.c add
virDomainGetAutostart(), virDomainSetAutostart(),
virNetworkGetAutostart() and virNetworkSetAutostart().
* src/libvirt_sym.version: export the API
* src/driver.h: add methods to the driver vtables.
* src/proxy_internal.c, src/qemu_internal.c,
src/test.c, src/xen_internal.c, src/xend_internal.c,
src/xm_internal.c, src/xs_internal.c: set those
methods to NULL
* qemud/conf.[ch]: significantly re-factor qemudLoadConfigXML()
so that "parse the XML", "assign the def to a VM" and
"save the XML" operations are in separate functions.
Add qemudRemoveInactiveVM() and qemudRemoveInactiveNetwork().
Report errors when loading config files at startup. Check
that a domain/network's name matches the config filename.
* qemud/driver.c: update the Create() and Define() functions
to explicitly parse/assign/save. Also, fix bug where if
Create() failed, we would free the VM without removing it
from the inactive list.
* qemud/qemud.c: use qemudRemoveInactiveVM/Network()
* qemud/driver.[ch], qemud/dispatch.c: fix the fact that
qemudDispatchDomainStart() doesn't report an error if the uuid
lookup fails and also move the uuid lookup into the driver
so that it matches the way we do Destroy().
* qemud/conf.c, qemud/driver.c, qemud/internal.h,
qemud/qemud.c: Merge the ->activevms and ->inactivevms
into a single ->vms list in order to make things
easier to manage. Likewise for networks. Also add
qemudIsActiveVM() and qemudIsActiveNetwork() inline
functions.
Fix a few leaks
* qemud/qemud.c: qemudCleanup(): free the socket
structures
* qemud/conf.c: fix various leaks in the xml parsing
* qemud/iptables.c: fix a typo causing a leak
* qemud/qemud.c: clean up qemudInitialize() and qemudListen()
so as to coalesce the two "system vs. user" code paths and
fix up some problems noticed by dan.
* qemud/qemud.c, qemud/dispatch.c, qemud/internal.h
qemud/conf.c, qemud/driver.c, configure.in: add a
qemudLog() function which uses syslog() if we're in daemon
mode, doesn't output INFO/DEBUG messages unless the
verbose flag is set and doesn't output DEBUG messages
unless compiled with --enable-debug. Also, make a first
pass through fatal errors and add error messages for them.
* qemud/internal.h, qemud/qemud.c: improve signal handling
and handle SIGHUP by shutting down all guests and networks
and re-loading configs, and handle SIGINT and SIGTERM
by shutting down cleanly.
* qemud/qemud.c, qemud/bridge.c, qemud/iptables.c: fix
our FD_CLOEXEC usage so that all fds which should be
closed on exec are marked as such and that we leave
exec() to do the actual closing.
* qemud/iptables.[ch]: add code for managing iptables
rules.
* qemud/Makefile.am: add iptables.[ch].
* qemud/qemud.c: add and remove iptables rules as
appropriate.
* qemud/conf.c: when starting a guess, add a rule
allowing it to forward packets across the networks
bridge.
* qemud/internal.h: add iptables context ptr
* configure.in: add --with-iptables-dir and
--with-iptables-prefix to allow us to put our rules
in a chain with the given prefix and save the rules
in files in the given dir so as to integrate with
the proposed "service iptables restart" solution
in:
https://bugzilla.redhat.com/227011
* include/libvirt/libvirt.h.in, src/libvirt.c: add
virNetworkGetBridgeName() to allow finding out what
bridge to connect to in order to join a network.
* src/driver.h: add networkGetBridgeName() to vtable.
* qemud/protocol.h: add the request and reply to
the qemud protocol.
* qemud/dispatch.c, qemud/driver.[ch]: handle them
here.
* src/qemu_internal.c: implement GetBridgeName()
in the qemu driver.
* src/libvirt_sym.version: add new symbol.
* src/xend_internal.c, src/xm_internal.c: pass the
connection to virDomainParseXMLDesc()
* src/xml.[ch]: make virDomainParseXMLDesc accept
a virConnectPtr so that we can use it later to
lookup the bridge associated with a network
* tests/xml2sexprtest.c: just pass NULL here, it's
safe
* qemud/conf.c: add support for connecting a qemu
guest to a bridge using a tap device in order to
connect it to a virtual network.
* qemud/internal.h: add <interface type="network">
config and track tapfds so as to not close them
on exec.
* qemud/qemud.c: don't close tapfds on exec and
disconnect the iface when the guest shuts down.
* configure.in: add --disable-bridge-params, check
for libsysfs and various kernel headers
* bridge.[ch]: add code for managing bridges
* qemud/Makefile.am: add bridge.[ch] and link against
libsysfs if enabled.
* qemud/conf.c: add support for bridge config.
* qemud/internal.h: add various bridging bits
* qemud/qemud.c: implement qemudStartNetworkDaemon()
and qemudShutdownNetworkDaemon().
* qemud/conf.[ch]: implement parsing and saving network
configs.
* qemud/driver.c: flesh out the stubs
* qemud/internal.h: add networks list etc. to
struct qemud_server
* qemud/qemud.c: add qemudStartNetworkDaemon() and
qemudShutdownNetworkDaemon() stubs.
* qemud/qemud.c: Re-factor out qemudExec() so that it can
be used to launch dnsmasq.
* qemud/conf.c: don't return argc from qemudBuildCommandLine()
as exec() doesn't need it.
* qemud/conf.c: Re-factor bits of conf.c so that:
- qemudMakeConfigPath() can be re-used given another configDir
- split qemudEnsureConfigDir() out of qemudSaveConfig() so
that it may be re-used to create another configDir
- split qemudScanConfigDir() out so that qemudScanConfigs()
can scan multiple configDirs
* qemud/conf.c: handle an unspecified MAC address,
fix the argv freeing code in qemudBuildCommandLine()
and fix copy and paste error in qemudGenerateXML()
Note: potential ABI break here, but people should
only really be using virError structs returned from
libvirt itself.
* include/libvirt/virterror.h: add virNetwork
to virError
* src/internal.h, src/virterror.c: add network param
to __virRaiseError()
* src/conf.c, src/hash.c, src/libvirt.c, src/proxy_internal.c,
src/qemu_internal.c, src/sexpr.c, src/test.c, src/xen_internal.c,
src/xend_internal.c, src/xm_internal.c, src/xml.c, src/xmlrpc.c,
src/xs_internal.c: update.
* include/libvirt/libvirt.h.in: add the networks APIs
* include/libvirt/virterror.h: add some error codes
* src/driver.h: add network driver vtable
* src/hash.c: add networks hash
* src/internal.h: add virNetwork
* src/libvirt.c: hook up the APIs to the network
driver
* src/libvirt_sym.version: add the new APIs
* src/virterror.c: handle the new error codes
Issues pointed out by Karel Zak <kzak@redhat.com>
* src/virsh.c: fix up some syntax strings, use BUFSIZ
and free names returned from virConnectListDefinedDomains()
* src/internal.h: virDomain.handle refers to the "id"
in the API, so re-name to virDomain.id to avoid
confusion.
* src/hash.c, src/libvirt.c, src/proxy_internal.c, src/test.c,
src/xen_internal.c, src/xend_internal.c, src/xm_internal.c,
src/xml.c, src/xs_internal.c: update for rename.
had changed between version 1 and version 2 too, the leading domain
field disapeared since it goes in the including op. Fixes redhat
bugs #217370 and #217743
Daniel
include/libvirt/libvirt.h: preparing libvirt-0.1.9 release
* po/*.po: more updates and fix all the .po to not barf when msgfmt
tries to process them
Daniel
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in src/driver.h
src/libvirt.c src/proxy_internal.c src/test.c src/virsh.c
src/xen_internal.c src/xend_internal.c src/xm_internal.c
src/xs_internal.c: added support for dumping core of domains
assuming a xend with the latest patch to do so.
Daniel
src/driver.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/test.c src/xen_internal.c
src/xend_internal.c src/xml.c src/xml.h src/xs_internal.c:
intagrated patch from Michel Ponceau to add hot-plug devices
support to the API, integrated in driver API and fixed
a few small things. Still a TODO in src/xml.c about
moving xenstore direct accesses to a new routine.
Daniel
to the XML description and handle its serialization back and
forth between XML and S-Expr
* tests/sexpr2xmltest.c tests/xml2sexprtest.c
tests/sexpr2xmldata/sexpr2xml-curmem.*
tests/xml2sexprdata/xml2sexpr-curmem.*: added specific regression
tests for this, this didn't disturb any of the other tests.
Daniel
* proxy/libvirt_proxy.c src/libvirt.c src/proxy_internal.[ch]
src/xs_internal.[ch]: the virtGetOsType entry point was calling
the xenstore directly instead of going though driver, refactored
and implemented a specific new RPC with the proxy when this is
called as non-root fixes rhbz#214264 .
Daniel
* src/xend_internal.c: fix the reconnection problem to xend pointed
by Philippe Berthault
* tests/Makefile.am tests/reconnect.c: add a specific test case
Daniel
hypercalls while still able to detect older versions, lot of
work, seems okay, there is just one function not yet converted
* src/xs_internal.c: dropping virConnectCheckStoreID()
Daniel
* configure.in include/libvirt/virterror.h src/Makefile.am
src/conf.c src/conf.h src/virterror.c src/xen_internal.c:
adding a subset of Xen config file parser, and serializer
* tests/Makefile.am tests/conftest.c tests/test_conf.sh
tests/confdata/Makefile.am tests/confdata/fc4.conf
tests/confdata/fc4.out: adding test program for config in and out
Daniel
include/libvirt/libvirt.h.in: preparing release of 0.1.4,
regenerated docs, fixed a few things
* src/proxy_internal.c src/test.c src/xend_internal.c:
a few trivial fixes
Daniel
src/xen_internal.c src/xend_internal.c src/xend_internal.h
src/xml.c src/xs_internal.c: cleanups, force the new vCPU
and affinity entry point to go though the driver framework,
and fix a few warning showing up in my pedantic environment.
Daniel
src/libvirt.c src/libvirt_sym.version src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xend_internal.h:
applied patch from Michel Ponceau and Philippe Berthault for
virtual CPU and affinity support plus a bit of cleanup.
Daniel
http accesses by default and to use the provided URI otherwise,
applied Jim Fehlig patch working around xend connection close bug
* autogen.sh: fixed package name
Daniel
src/xen_internal.c: fixing the proxy installation, integrate in
the spec file and fix a few bugs in the proxy, seems to behave
correctly now.
* docs/apibuild.py docs/*: fixing the doc and API generator
Daniel
src/xen_internal.h src/xend_internal.c src/xend_internal.h:
implemented id based lookup and other cleanups, virsh starts to
work, but still some TODOs
Daniel
src/Makefile.am: moved proxy/proxy.h and proxy/proxy_client.c as
proxy_internal.[ch] and integrated them as a new driver.
* proxy/Makefile.am proxy/libvirt_proxy.c src/xen_internal.c
src/xen_internal.h src/xend_internal.c: various related cleanups.
Daniel
proxy/proxy.h proxy/proxy_client.c src/internal.h src/xen_internal.c
src/xend_internal.c: started working on a proxy to access xend
for unpriviledged users to avoid opening xend HTTP service to
serve those read-only operations.
Daniel
include/libvirt/virterror.h python/generator.py python/libvir.c
python/libvirt_wrap.h src/driver.h src/internal.h src/test.h
src/virsh.c src/virterror.c src/xend_internal.c src/xend_internal.h
src/xml.c src/xml.h: moved the includes from include/ to
include/libvirt to reflect the installed include tree. This
avoid using "" in the includes themselves.
Daniel
src/xend_internal.c src/xs_internal.c: add driver numbers and
tweak a bit suspend/resume/destroy operation to avoid doing
them directly though the hypervisor if other succeeded first.
Daniel
* src/driver.h src/libvirt.c src/test.c src/xen_internal.c
src/xend_internal.c src/xs_internal.c: started to fix some of
the driver related problem raised by Daniel Berrange, added a
ver version field to drivers.
Daniel
to be of type 'unsigned char' since its a raw UUID we're passing in,
not a printable one.
* src/libvirt.c: Remove bogus "unsigned char" -> "char" type casts. Hook
up the "domainLookupByID", "domainLookupByUUID", "domainLookupByName"
and "domainGetInfo" driver backend functions.
Daniel
some processing but not used yet
* src/libvirt.c src/xen_internal.c src/xen_internal.h: added domain
listing and number queries entry points based on the hypervisor
which should speed up some processing as root.
Daniel
virDomainSetMemory to set up the target memory use for a domain
* src/driver.h src/libvirt.c src/xen_internal.c src/xend_internal.[ch]
src/xs_internal.[ch]: added a new entry point in the drivers for this,
also fixed the xen store entry, as changing
/local/domain/$$/memory/target affects the target memory not the max,
apparently max is not visible at the xenstore level (or I missed it)
Daniel
src/xs_internal.c: implementing domain pointers unification, thread
safety and reference counting for domain and connections, this was
the last critical change needed before making further progresses at
the API level. Still a couple fo things TODO for this, unification
at the Python level and adding UUID to hash. All domain/connect alloc
and free routines are now centralized in hash.c
* docs/APIchunk1.html docs/libvirt-api.xml docs/libvirt-refs.xml
docs/html/libvirt-libvirt.html: regenerated the docs, that doesn't
change the API.
Daniel
src/libvirt_sym.version src/*_internal.[ch]: added an entry
point for reboot and corresponding driver plug
* src/virsh.c: added a reboot option using it
* docs/*: regenerated
Daniel
new create command
* src/xend_internal.c src/xml.c: trying to cope with the new
xvda domains states generated on FC5, but Dom0 bootloader
really break the model, so that doesn't work.
Daniel
src/internal.h src/libvirt_sym.version src/xen_internal.c
src/xs_internal.c: added a new entry point to get node hardware
informations virGetNodeInfo, and associated driver hook.
* src/xend_internal.c: implemented the node and version information
hooks for the Xen Daemon
* python/libvir.c python/libvirt-python-api.xml python/generator.py:
also added Python bindings for the new call
Daniel
* src/libvirt_sym.version: add initialize entry point
* src/libvirt.c: make sure we always initialize the lib
* python/tests/*.py: start updating exemple for exception
handling as pointed by Jim Meyering
Daniel
* include/libvirt.h include/libvirt.h.in: added intialization function
* include/virterror.h src/virterror.c: one more error code
* src/internal.h: first part of Jim's format checking
* src/libvirt.c src/xen_internal.[ch] src/xend_internal.[ch]
src/xs_internal.[ch]: initialization and registration of drivers
Daniel
src/virterror.c: created a new module related to Xen Store accesses
* src/libvirt.c src/xen_internal.[ch] src/xend_internal.[ch]:
nearly completed the separation of the code from the different modules
Daniel
src/xen_internal.h docs/apibuild.py: starting the refactoring,
first the direct Xen hypervisor module. New header describing the
entry points of a driver.
Daniel
src/sexpr.h src/virsh.c src/virterror.c src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xend_internal.h
src/xml.c src/xml.h: applied cb/indent to homogenize the source
style, as a first pass.
Daniel
* python/Makefile.am python/generator.py python/libvir.c
python/libvir.py: improved python binding, raise exception
when an instance creation or lookup fails, and add support
for the global error handler, per conn handler still needed
* python/tests/error.py python/tests/Makefile.am: adding a
regression test
Daniel
virDefaultErrorFunc()
* src/sexpr.c src/xen_internal.c src/virterror.c include/virterror.h:
adding more error reporting though the code, nearly complete.
* src/sexpr.c: added specific error function to avoid an error report.
Daniel
* include/virterror.h src/internal.h src/libvirt.c src/virterror.c
src/xend_internal.c: commiting a first pass at adding error handling
in the code, not finished, but it starts to work, need more coverage
and testing.
Daniel
src/virterror.c include/Makefile.am include/virterror.h: adding
the public APIs for errors, callbacks and synchronous. The boring
stuff is still left to do, plugging it. Also need to be exposed
at the python level.
* doc//*: rebuilt
Daniel
* python/generator.py python/libvir.c python/libvirt-python-api.xml:
also fixing the binding for getting a domain UUID
* python/tests/Makefile.am python/tests/uuid.py: added a test
for the new UUID API
Daniel
src/libvirt_sym.version: added virDomainLookupByUUID and
virDomainGetUUID to be able to use the persistant UUID names
* docs//*: rebuilt the docs following the API extension
Daniel
* python/tests/Makefile.am: fix a small PYTHONPATH bug
* docs//*: fixed the xsl a bit for toc names, added doc for
the python bindings, regenerated
Daniel
XML dump function around to make sure all entry points are centralized
in libvirt.c and also avoid doc generation troubles.
* docs/examples/Makefile.am docs/examples/index.py: fix the makefile
a bit.
* TODO: updated
* docs/format.html: added a description of the XML used for the
domains.
* docs//*: rebuilt
Daniel
docs/site.xsl: integates the examples page in the web site
* docs//* : fixed generator and rebuilt the docs
* python/tests/basic.py python/tests/create.py: couple cleanups
Daniel
* include/libvirt.h include/libvirt.h.in: cleanup
* src/libvirt.c: remove debugging output
* src/xend_internal.c src/xml.c src/xml.h: reimplement
virDomainGetXMLDesc() based on xend interface, now work as user too.
Daniel
difficult since it requires a system image
* src/libvirt.c src/xend_internal.c: fixed the shutdown API which
was broken due to a bad reason at the xend level.
Daniel
* include/libvirt.h* src/libvirt.c src/xend_internal.[ch]
src/xml.[ch]: added XML parsing for Xen domain descriptions
needed for creates, plugged in a converter to s-exp and
xend call. Modified the virDomainCreateLinux() to reflect
that XML based description. Seems to work.
* python/tests/create.py: added a test case which seems to work
not tested much yet
* docs/*: regenerated
Daniel
restore API (though it would be better if it was returning
a domain pointer in case of success)
* src/virsh.c: added save and restore to the commands, tested,
the option handling need work though
Daniel
doc fix
* src/virsh.c: fix a integer being formatted as %s in idof
* src/internal.h src/libvir.c src/xend_internal.[ch]: started to
integrated the xend back-end, especially for getting informations
about a domain.
Daniel
version for python bindings, heavilly based on libxml2/libxslt
way of doing things, maybe this need to be revisited. Added packaging
too.
* src/hash.h: fixed the Copyright notice.
Daniel
src/libvir_sym.version src/virsh.c src/xml.c: started working on
the XML dump, added a dumpxml virsh version and a bit of
infrastructure code. Found a way to detect dead ID from xenstore
data.
Daniel
include/Makefile.am: provide/fix library versionning information
include/libvir.h is now generated !
* include/libvir.h.in src/libvir.c: revamp APIs and implement
complete ones.
* src/virsh.c: finish the version command and a bit of cleanup.
Daniel
* src/libvir.c src/libvir_sym.version src/xen_internal.[ch]
include/libvir.h: implementing hypervisor Version and Type interfaces
* src/virsh.c: adding a version command, WIP
Daniel
docs/Makefile.am docs/bugs.html docs/index.html docs/intro.html
docs/libvir.html docs/redhat.gif docs/site.xsl: starting to add
the web site, based on libxml2 one.
* src/hash.c: add a missing include
Daniel
docs/libvir-refs.xml: fix XML API generation
* include/libvir.h src/libvir.c src/virsh.c: fix the info memory
API again, use KB, not bytes so that an unsigned long is sufficient.
Daniel
one.
* include/libxen.h src/libxen.c src/libxen_sym.version: extend API
start to access libxenctrl directly (need xen update to get includes)
* src/xensh.c: access to both xenstore and hypervisor
Daniel
config.h.in configure.in: fix make dist, add rpm packaging
* src/libxen_sym.version src/Makefile.am: set a policy of no
export by default of library symbols
Daniel
