Preserve block dirty bitmaps after migration with
QEMU_MONITOR_MIGRATE_NON_SHARED_(DISK|INC).
This patch implements functions which offer the bitmaps to the
destination, check for eligibility on destination and then configure
source for the migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In case when the block migration job required temporary bitmaps for
merging the appropriate checkpoints we need to clean them up when
cancelling the job. On success we don't need to do that though as the
bitmaps are just temporary thus are not written to disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Test the XML infrastructure for <blockDirtyBitmaps> migration cookie
element as well as the conversion to migration parameters for QMP schema
validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The XML sample shows the status XML when migrating with bitmaps
including the <tempBlockDirtyBitmaps> element added in previous commit.
It will also be used for the migration cookie test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add status XML infrastructure for storing a list of block dirty bitmaps
which are temporarily used when migrating a VM with
VIR_MIGRATE_NON_SHARED_DISK for cleanup after a libvirtd restart during
migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
'qemuMigrationCookieBlockDirtyBitmapsMatchDisks' maps the bitmaps from
the migration cookie to actual disk objects definition pointers.
'qemuMigrationCookieBlockDirtyBitmapsToParams' converts the bitmap
definitions from the migration cookie into parameters for the
'block-bitmap-mapping' migration parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In cases where we are copying the storage we need to ensure that also
bitmaps are copied properly. This patch adds migration cookie XML
infrastructure which will allow the migration sides reach consensus on
which bitmaps to migrate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add the migration capability flag and the propagation of the
corresponding mapping configuration. The mapping will be produced from
the bitmaps on disk depending on both sides of the migration and the
necessity to perform merges.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There's no need in the cleanup steps to invoke a transaction to delete a
single bitmap.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The non-transaction wrapper is useful for code paths which want to
delete individual bitmaps or for cleanup after a failed job where we
want to attempt to delete every bitmap individually to prevent a failure
from cleaning up the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use the new format when pre-creating the image for the user. Users
wishing to use the legacy format can always provide their own images or
use shared storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Such images don't support stuff like dirty bitmaps. Note that the
synthetic test for detecting bitmaps is used as an example to prevent
adding additional test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The capability represents qemu's ability to setup mappings for migrating
block dirty bitmaps and is based on presence of the 'transform' property
of the 'block-bitmap-mapping' property of 'migrate-set-parameters' QMP
command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Include the 'transform' member of 'block-bitmap-mapping'. This is based
on qemu commit v5.2.0-2208-gc79f01c945
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch partially reverts commit 5cde9dee where the qemuExtDevicesStop()
was moved to a location before the QEMU process is stopped. It may be
alright to tear down some devices before QEMU is stopped, but it doesn't work
for the external TPM (swtpm) which assumes that QEMU sends it a signal to stop
it before libvirt may try to clean it up. So this patch moves the
virFileDeleteTree() calls after the call to qemuExtDevicesStop() so that the
pid file of virtiofsd is not deleted before that call.
Afftected libvirt versions are 6.10 and 7.0.
Fixes: 5cde9dee8c
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Stdio was buffering strings in functions:
myDomainEventBlockJobCallback,
myDomainEventBlockThresholdCallback,
myDomainEventMemoryFailureCallback. It caused flushing the
printed strings from callbacks at the end of a run, not
gradually. The solution is to add \n at the end of each string.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A VM defined similar to:
...
<features><kvm><hint-dedicated state='on'/></kvm></features>
<cpu mode="host-model"/>
...
is currently invalid, as hint-dedicated is only allowed if cpu mode
is host-passthrough or maximum. This restriction is unnecessary, see
https://bugzilla.redhat.com/show_bug.cgi?id=1857671
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Stay true to the name of the function and clear the pointer
after freeing it.
This also silences a bogus Coverity report about a double
free in qemuMonitorGetCPUInfo where qemuMonitorCPUInfoClear
is called right after allocating a new qemuMonitorCPUInfo
to fill out the non-zero defaults.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The comment and the caller assume virQEMUSaveDataNew only steals
domXML on success, but it is copied even on failure.
Also remove the misleading g_steal_pointer call on a local variable.
Reported by coverity.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The switch to g_auto left this one call behind.
Reported by Coverity.
Fixes: 4ab0d1844a
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 76f4788932 made qemuNodeDeviceDetachFlags() unusable due to an
'if then else if' chain that will always results in a 'return -1',
regardless of 'driverName' input.
Found by Coverity.
Fixes: 76f4788932
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Just return when alias is null and Remove the 'ret' variable.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This script works under two specific conditions. For each opened file,
search for all functions that has ACL calls and store them, and see
if there is a vir*DriverPtr struct declared in it. For each implementation
found, check if there is an ACL verification inside it, and error out if
none was found. The script also supports the concept of stub, where another
function takes the responsibility for the ACL call instead of the
original API.
Unfortunately this is not enough to cover the new scenario we have now,
with domain_driver.c containing helper functions that execute the ACL
calls. The script does not store state between files because, until now,
it wasn't needed to - APIs and stubs and vir*DriverPtr declarations were
always in the same file. Also, the script will not check for ACL in functions
that does not belong to a vir*DriverPtr interface. What we have now in
domain_driver.c breaks both assumptions: the functions are in a different
file, and there is no vir*DriverPtr being implemented in the file that
uses these functions.
This patch changes check-aclrules.py to accomodate this scenario. The helpers
that have ACL checks are stored beforehand in aclFuncHelpers, allowing other
files to use them to recognize a stub situation. In case the current file
being analyzed is domain_driver.c itself, we'll do a manual check using
aclFuncHelpers to verify that these functions indeed have ACL checks.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceDetachFlags() and qemuNodeDeviceDetachFlags() are mostly
equal, aside from how the virHostdevmanager pointer is retrieved and
the PCI stub driver used.
Now that the PCI stub driver verification is done early in both functions,
we can use the virDomainDriverNodeDeviceDetachFlags() helper to reduce
code duplication between them. 'driverName' is checked inside the helper
to set the appropriate stub driver.
The helper is named with the 'Flags' suffix, even when the helper itself
isn't receiving the flags from the callers, to be compliant with the
ACL function virNodeDeviceDetachFlagsEnsureACL() that is being called
inside it and was called from the original functions. Renaming the helper
would implicate in renaming REMOTE_PROC_NODE_DEVICE_DETACH_FLAGS, and all the
related structs inside remote_protocol.x, to be compliant with the ACL
rules.
This is not being checked at this moment, but we'll fix check-aclrules.py to
verify all the helpers that calls ACL functions in domain_driver.c shortly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The validation of 'driverName' does not depend on any other state and can be
done right on the start of the function. We can fail earlier while avoiding
a cleanup jump.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The validation of 'driverName' does not depend on any other state and can be
done right on the start of the function. We can fail earlier while avoiding
a cleanup jump.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceReAttach() and qemuNodeDeviceReAttach() are mostly equal,
differing only how the virHostdevManager pointer is retrieved.
Put the common code into virDomainDriverNodeDeviceReAttach() to reduce
code duplication.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Next patch will use g_autoptr() with virNodeDevicePtr for cleanups.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceReset() and qemuNodeDeviceReset() are mostly equal,
differing only how the virHostdevManager pointer is retrieved.
Put the common code into virDomainDriverNodeDeviceReset() to reduce
code duplication.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Setting the system time backward would lead to a
multiplication overflow in function virKeepAliveStart.
The function virKeepAliveTimerInternal got the same bug too.
Backtrace below:
#0 0x0000ffffae898470 in raise () from /usr/lib64/libc.so.6
#1 0x0000ffffae89981c in abort () from /usr/lib64/libc.so.6
#2 0x0000ffffaf9a36a8 in __mulvsi3 () from /usr/lib64/libvirt.so.0
#3 0x0000ffffaf8fd9e8 in virKeepAliveStart (ka=0xaaaaf954ce10, interval=interval entry=0,
count=count entry=0) at ../../src/rpc/virkeepalive.c:283
#4 0x0000ffffaf908560 in virNetServerClientStartKeepAlive (client=0xaaaaf954cbe0)
at ../../src/rpc/virnetserverclient.c:1628
#5 0x0000aaaac57eb6dc in remoteDispatchConnectSupportsFeature (server=0xaaaaf95309d0,
msg=0xaaaaf9549d90, ret=0xffff8c007fc0, args=0xffff8c002e70, rerr=0xffff9ea054a0,
client=0xaaaaf954cbe0) at ../../src/remote/remote_daemon_dispatch.c:5063
#6 remoteDispatchConnectSupportsFeatureHelper (server=0xaaaaf95309d0, client=0xaaaaf954cbe0,
msg=0xaaaaf9549d90, rerr=0xffff9ea054a0, args=0xffff8c002e70, ret=0xffff8c007fc0)
at ./remote/remote_daemon_dispatch_stubs.h:3503
#7 0x0000ffffaf9053a4 in virNetServerProgramDispatchCall(msg=0xaaaaf9549d90, client=0xaaaaf954cbe0,
server=0x0, prog=0xaaaaf953a170) at ../../src/rpc/virnetserverprogram.c:451
#8 virNetServerProgramDispatch (prog=0xaaaaf953a170, server=0x0, server entry=0xaaaaf95309d0,
client=0xaaaaf954cbe0, msg=0xaaaaf9549d90) at ../../src/rpc/virnetserverprogram.c:306
#9 0x0000ffffaf90a6bc in virNetServerProcessMsg (msg=<optimized out>, prog=<optimized out>,
client=<optimized out>, srv=0xaaaaf95309d0) at ../../src/rpc/virnetserver.c:137
#10 virNetServerHandleJob (jobOpaque=0xaaaaf950df80, opaque=0xaaaaf95309d0)
at ../../src/rpc/virnetserver.c:154
#11 0x0000ffffaf812e14 in virThreadPoolWorker (opaque=<optimized out>)
at ../../src/util/virthreadpool.c:163
#12 0x0000ffffaf81237c in virThreadHelper (data=<optimized out>) at ../../src/util/virthread.c:246
#13 0x0000ffffaea327ac in ?? () from /usr/lib64/libpthread.so.0
#14 0x0000ffffae93747c in ?? () from /usr/lib64/libc.so.6
(gdb) frame 3
#3 0x0000ffffaf8fd9e8 in virKeepAliveStart (ka=0xaaaaf954ce10, interval=interval entry=0,
count=count entry=0) at ../../src/rpc/virkeepalive.c:283
283 timeout = ka->interval - delay;
(gdb) list
278 now = time(NULL);
279 delay = now - ka->lastPacketReceived; <='delay' got a negative value
280 if (delay > ka->interval)
281 timeout = 0;
282 else
283 timeout = ka->interval - delay;
284 ka->intervalStart = now - (ka->interval - timeout);
285 ka->timer = virEventAddTimeout(timeout * 1000, virKeepAliveTimer, <= multiplication overflow
286 ka, virObjectFreeCallback);
287 if (ka->timer < 0)
(gdb) p now
$2 = 18288001
(gdb) p ka->lastPacketReceived
$3 = 1609430405
Signed-off-by: BiaoXiang Ye <yebiaoxiang@huawei.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
All of these strings are allocated once, freed once, and are never
returned out of the function where they are declared.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
* src/util/virsocket.c (virSocketRecvFD): Set msg.msg_controllen as documented
in the man pages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using locally built images is a useful feature; our commentaries even
mention overriding them may be useful in some scenarios. Expose the
variables in the help to let users know they can use the feature.
Formatting would definitely break, so this patch adds more spacing for
proper alignment.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In commit 321293e2 I dropped the prepare.sh script, but forgot to
remove the corresponding variable from the Makefile.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
According to meson.build the minimal version of curl needed is
7.18.0 which was released in January 2008. If the minimal version
is bumped to 7.19.1 (released in November 2008) we can drop some
workarounds because this newer version provides APIs we need.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This completer offers completion for --codeset argument of
send-key command.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These are all cases when 1) the pointer is passed by reference from
the caller (ie.e. **) and expects it to be NULL on return if there is
an error, or 2) the variable holding the pointer is being checked or
re-used in the same function, but not right away.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
switching to g_autofree left many cleanup: sections empty.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Or when it will be immediately have a new value assigned to it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
mimeType is initialized to NULL, and then only set in one place, just
before a check (not involving mimeType) that then VIR_FREEs mimeType
if it fails. If we just reorder the code to do the check prior to
setting mimeType, then there won't be any need to VIR_FREE(mimeType)
on failure (because it will already be empty/NULL).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we put the potential return string into the g_autofreed tmpResult,
and the move it to the returned "result" only as a final step ater, we
can avoid the need to explicitly VIR_FREE (or g_free) on failure.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
