This strictens the parser to disallow negative values (interpreted as
`UINT_MAX + value + 1`) for attribute `retries`. UINT_MAX holds no
special significance for this attribute and is distinctly out of range
for normal use.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This strictens the parser to disallow negative values (interpreted as
`UINT_MAX + value + 1`) for attribute `id`.
`id` must be greater than 0 and does not benefit from being referable as
e.g. "-7" for host audio backend 4294967289, as this value is distinctly
out of range for normal use.
Additionally, this patch fixes a use of NULL string with printf's %s
modifier if the `model` attribute is absent.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When updating entries in a bridge forwarding database (i.e., when
macTableManager='libvirt' is configured for the bridge), we may end up
in a situation when the entry we want to add is already present. Let's
just ignore the error in such a case.
This fixes an error to resume a domain when fdb entries were not
properly removed when the domain was paused:
virsh # resume test
error: Failed to resume domain test
error: error adding fdb entry for vnet2: File exists
For some reason, fdb entries are only removed when libvirt explicitly
stops CPUs, but nothing happens when we just get STOP event from QEMU.
An alternative approach would be to make sure we always remove the
entries regardless on why a domain was paused (e.g., during migration),
but that would be a significantly more disruptive change with possible
side effects.
https://bugzilla.redhat.com/show_bug.cgi?id=1603155
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Commit 28a8699316 ( v6.9.0-179-g28a8699316 ) incorrectly replaced
VIR_EXPAND_N by g_renew.
VIR_EXPAND_N has these two extra effects apart from reallocating memory:
1) The newly allocated memory is zeroed out
2) The number of elements in the array which is passed to VIR_EXPAND_N
is increased.
This comes into play when used with virDomainLeaseInsertPreAlloced,
which expects that the array element count already includes the space
for the added 'lease', by plainly just assigning to
'leases[nleases - 1]'
Since g_renew does not increase the number of elements in the array
any existing code which calls virDomainLeaseInsertPreAlloced thus either
overwrites a lease definition or corrupts the heap if there are no
leases to start with.
To preserve existing functionality we revert the code back to using
VIR_EXPAND_N which at this point doesn't return any value, so other
commits don't need to be reverted.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1953577
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
virCommandRun() already handles the case where the cmd argument is NULL,
so there's no need for the caller to check. Make all callers consistent
and remove unnecessary NULL checks.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Coverity complained that the 'default' case of the switch in
nodeDeviceGetMdevctlCommand() was falling through without initializing
'cmd'. Return NULL in this case even though it should never happen.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When returning early due to errors, cmd will be leaked. Use an autoptr
to handle these early returns without leaking memory.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Jumping back in the code is an anti-pattern that should be avoided if
possible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't require that the data is consistent on the destination if
aborting the migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rename the parameter so that it's more clear what state we are in and
fix all callees.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want to unify on one block job cancellation API. Use
qemuMonitorBlockJobCancel which has more features.
In case of job refresh, we are killing off any unknown jobs so we don't
care about their fate.
Another difference is that an possible error from the block job
cancellation might be reported, but we don't really care here ince
it's a very unlikely scenario and we also report a warning.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want to unify on one block job cancellation API. Use
qemuMonitorBlockJobCancel which has more features.
In case of backup jobs we can cancel the jobs forcefully since the code
is on a cleanup path when the job fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'block-job-cancel' has one very important semantic difference to
'job-cancel', docummented in qemu as:
Note that if you issue 'block-job-cancel' after 'drive-mirror' has indicated
(via the event BLOCK_JOB_READY) that the source and destination are
synchronized, then the event triggered by this command changes to
BLOCK_JOB_COMPLETED, to indicate that the mirroring has ended and the
destination now has a point-in-time copy tied to the time of the cancellation.
Since libvirt advertises the block copy job as having the synchronous
abort feature we must not use 'job-cancel' here.
Fixes: 4817b5ca1d
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In certain cases such as when aborting migration we don't really care
for completion of the blockjob. Add 'force' as parameter of
'block-job-cancel'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing and remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't try to setup disk migration and the NBD stuff if we end up
migrating nothing.
The destination side has luckily no setup for the non-NBD cases so
omitting the element fully is okay.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't even try to setup storage migration if there are no eligible
disks.
This also fixes migration from older libvirts which didn't format an
empty <nbd/> element in the migration cookie if there weren't any disks
to migrate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Base the decision on the main API flags (VIR_MIGRATE_NON_SHARED_DISK,
QEMU_MONITOR_MIGRATE_NON_SHARED_INC) via a boolean 'storageMigration'
rather than juggling everything trhough 'migration_flags'.
After this patch 'migration_flags' is updated to contain the legacy
storage migration flags only when we'll be about to use it rather than
setting it and then resetting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'migrate_flags' can be updated in the only caller and since
qemuMigrationSrcNBDStorageCopy already takes @flags which contains
VIR_MIGRATE_NON_SHARED_INC (used to set
QEMU_MONITOR_MIGRATE_NON_SHARED_INC) we can completely remove the
parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case the 'nbdURI' schema is not known the code would report an error
but wouldn't return failure.
Fixes: 49186372db
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 518be41aaa refactored qemuMigrationCookieNBDXMLFormat to use
virXMLFormatElement which in comparison to the previous code doesn't
format the element if it's empty.
Unfortunately some crusty bits of our migration code use questionable
logic to assert use of the old-style storage migration parameters which
breaks if no disks are being migrated and the <nbd/> element is not
present.
While later patches will fix the code, re-instate formatting of empty
<nbd/> for increased compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a helper which will format an XML element with attributes and
children, but compared to virXMLFormatElement it also formats an empty
element if both buffers are empty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Function incorrectly returns 0 when property was successfully read.
Fixes: ab5d2776c9
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When placing vCPUs into CGroups the qemuProcessSetupPid() is
called which then enters a for() loop (around its middle) where
it calls virDomainNumaGetNodeCpumask() for each guest NUMA node.
But the latter returns only a pointer not new reference/copy and
thus the caller must not free it. But the variable is decorated
with g_autoptr() which leads to a double free.
Fixes: 2d37d8dbc9
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
libssh2 has ECDSA and ED25519 support beginning with v1.9.0. libvirt cannot
make use of those because it will handle them as unknown key types.
Add support for those host key types.
Signed-off-by: Bastian Germann <bastiangermann@fishpost.de>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Calling VIR_FREE on a virDomainDef* does not free its various contained
pointers.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Preparatory step to remove virDomainChrSourceDefParseMode.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is the bug I'm facing. I deliberately configured a container
so that the source of a <filesystem/> to passthrough doesn't
exist. The start fails with:
lxcContainerPivotRoot:669 : Failed to create /non-existent/path/.oldroot: Permission denied
which is expected. But what is NOT expected is that CGroup
hierarchy is left behind. This is because the controller sets up
the CGroup hierarchy, user namespace, moves interfaces, etc. and
finally checks whether container setup (done in a separate
process) succeeded. Only after all this the error is propagated
to the LXC driver. The driver aborts the startup and tries to
perform the cleanup, but this is missing CGroups because those
weren't detected yet.
Ideally, whenever a function fails, it tries to unroll back so
that is has no artifacts left behind (look at all those frees/FD
closes/etc. at end of functions). But with CGroups it is
different - the controller process can't clean up after itself,
because it is still running inside that CGroup.
Therefore, what we have to do is to let the driver detect CGroups
as soon as they are created, and proceed with controller
execution only after that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, there is only a single pipe passed to lxc_controller
and it is used by lxc_controller to signal to the LXC driver that
the container is set up and ready to run. However, in the next
commit we will need to signal that the LXC driver has done its
part of startup process and thus the controller can proceed.
Unfortunately, virCommand handshake can't be used for this,
because it's already used to read controller's PID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Future commits will want to reuse the handshakeFd and thus it
mustn't be closed in virLXCControllerDaemonHandshake(). Do the
closing explicitly afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The lxc_controller has a structure that's keeping its internal
state, including so called handshakeFd which is the write end of
a pipe that's used to signal to the LXC driver that the container
is set up and ready to run. However, the struct member is not
initialized to -1, so if anything fails before it is set then the
virLXCControllerFree() function tries to close FD 0 (stdin).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Convenience function to return the value of an unsigned long long XML
attribute.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With the last usage of `aes` and `dea` as int gone, these two can
become virTristateSwitch.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This adds a new XML element
<filesystem>
<binary>
<sandbox mode='chroot|namespace'/>
</binary>
</filesystem>
This will be used by qemu virtiofs
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The code in storage_backend_fs is used for storage_dir and storage_fs
drivers so some parts need to be guarded by checking for
WITH_STORAGE_FS.
Fixes: 16c69e7aae
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Copy the socket path in qemuExtDevicesStart, because
for libvirt-managed virtiofsd daemons the path is filled there
in qemuVirtioFSStart.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.
<filesystem type='mount'>
<driver type='virtiofs' queue='1024'/>
<source socket='/tmp/sock/'/>
</filesystem>
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far VIR_DOMAIN_FS_ACCESSMODE_PASSTHROUGH is always set
in virDomainFSDefPostParse, but future commits aim to change
that.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the default setting of accessmode to the post-parse phase.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This strictens the parser to disallow negative values (interpreted as
`UINT_MAX + value + 1`) for attribute `speed`, which does not make sense for
a value measured in Mbits per second.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In certain rare occasions qemu can transition a block job which was
already 'ready' into 'standby' and then back. If this happens in the
following order libvirt will get confused about the actual job state:
1) the block copy job is 'ready' (job->state == QEMU_BLOCKJOB_STATE_READY)
2) user calls qemuDomainBlockJobAbort with VIR_DOMAIN_BLOCK_JOB_ABORT_PIVOT
flag but without VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC
3) the block job is switched to synchronous event handling
4) the block job blips to 'standby' and back to 'ready', the event is
not processed since the blockjob is in sync mode for now
5) qemuDomainBlockJobPivot is called:
5.1) 'job-complete' QMP command is issued
5.2) job->state is set to QEMU_BLOCKJOB_STATE_PIVOTING
6) code for synchronous-wait for the job completion in qemuDomainBlockJobAbort
is invoked
7) the waiting loop calls qemuBlockJobUpdate:
7.1) job->newstate is QEMU_BLOCKJOB_STATE_READY due to 4)
7.2) qemuBlockJobEventProcess is called
7.3) the handler for QEMU_BLOCKJOB_STATE_READY overwrites
job->state from QEMU_BLOCKJOB_STATE_PIVOTING to QEMU_BLOCKJOB_STATE_READY
8) qemuDomainBlockJobAbort is looking for a finished job, so waits again
9) qemu finishes the blockjob and transitions it into 'concluded' state
10) qemuBlockJobUpdate is triggered again, this time finalizing the job.
10.1) job->newstate is = QEMU_BLOCKJOB_STATE_CONCLUDED
job->state is = QEMU_BLOCKJOB_STATE_READY
10.2) qemuBlockJobEventProcessConcluded is called, the function
checks whether there was an error with the blockjob. Since
there was no error job->newstate becomes
QEMU_BLOCKJOB_STATE_COMPLETED.
10.3) qemuBlockJobEventProcessConcludedTransition selects the action
for the appropriate block job type where we have:
case QEMU_BLOCKJOB_TYPE_COPY:
if (job->state == QEMU_BLOCKJOB_STATE_PIVOTING && success)
qemuBlockJobProcessEventConcludedCopyPivot(driver, vm, job, asyncJob);
else
qemuBlockJobProcessEventConcludedCopyAbort(driver, vm, job, asyncJob);
break;
Since job->state is QEMU_BLOCKJOB_STATE_READY,
qemuBlockJobProcessEventConcludedCopyAbort is called.
This patch forbids transitions to QEMU_BLOCKJOB_STATE_READY if the
previous job state isn't QEMU_BLOCKJOB_STATE_RUNNING or
QEMU_BLOCKJOB_STATE_NEW.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1951507
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Future patch will remove MKFS define as we will no longer check it
during compilation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function in question uses "tc" binary so virnetdevbandwidth feels
like better place for it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow us to run tests using firewall on hosts where the mocked
binaries are not available/installed instead of skipping these tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Following patches will make this change necessary as we will stop
detecting the full path during compile time.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We always pass DNSMASQ so there is no need for the argument at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We always pass DNSMASQ so there is no need for the argument at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of removing binaryPath let's drop the function completely as
it is not used anywhere.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of removing binaryPath let's drop the function completely as
it is not used anywhere.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We will never call dnsmasqCapsRefresh() so reflect what actually
happens.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The new enum helpers use a set of flags to modify their behaviour, but
the declared set of flags is semantically confusing:
typedef enum {
VIR_XML_PROP_OPTIONAL = 0, /* Attribute may be absent */
VIR_XML_PROP_REQUIRED = 1 << 0, /* Attribute may not be absent */
Since VIR_XML_PROP_OPTIONAL is declared as 0 any other flag shadows it
and makes it impossible to detect. The functions are not able to detect
a semantic nonsense of VIR_XML_PROP_OPTIONAL | VIR_XML_PROP_REQUIRED and
it's a perfectly valid statement for the compilers.
In general having two flags to do the same boolean don't make sense and
the implementation doesn't fix any shortcomings either.
To prevent mistakes, rename VIR_XML_PROP_OPTIONAL to VIR_XML_PROP_NONE,
so that there's always an enum value used with the calls but it doesn't
imply that the flag makes the property optional when the actual value is
0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As I've pointed out in my review, the negative number wrapping for
unsigned variables is an anti-feature which should not be promoted in
any way.
Remove VIR_XML_PROP_WRAPNEGATIVE which would make it more accessible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
xmlDocSetRootElement removes the node from its previous document tree,
effectively removing the "<cpu>" node from "<domain>" in virCPUDefParseXML.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The g_path_is_absolute() considers more situations
than just a simply "path[0] == '/'".
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These per-command generator functions were only exposed in the header to
allow the commandline generation to be tested. Now that we have a
generic mdevctl command generator, we can get rid of the per-command
wrappers and reduce the noise in the header.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Currently there are dedicated wrappers to construct mdevctl command.
These are mostly fine except for the one that translates both "start"
and "define" commands, only because mdevctl takes the same set of
arguments. Instead, keep the wrappers, but let them call a single
global translator that handles all the mdevctl command differences and
commonalities.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This is not a 1:1 mapping to mdevctl commands because mdevctl doesn't
support a separate 'create' command. mdevctl uses 'start' for both
starting a pre-defined device as well as for creating and starting a new
transient device. The libvirt code will be more readable if we treat
these as separate commands. When we need to actually execute mdevctl,
the 'create' command will be translated into the appropriate 'mdevctl
start' command.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
rather than using short opentions (e.g. "-p 0000:00:02.0"), use long
options everywhere (e.g. "--parent=0000:00:02.0")
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
"start" in libvirt means - "take this object and create an
instance out of it"
"create" in libvirt most of the time means - "take and XML description,
make an object out of it and use it to create an instance"
This gets confusing with mdevctl which uses "start" for both. So, this
patch proposes to use virMdevctlStart in cases where from libvirt's POV
we're starting a defined device (unlike mdevctl). Similarly, use
virMdevctlCreate in scenarios where XML description is passed to
libvirt and a transient device is supposed to be created.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
These errors are demoted to debug statements[1] since they're only
intended to be used as return values for public APIs. This makes it
difficult to debug the problem when something goes wrong since no error
message is logged. Switch instead to VIR_ERR_INTERNAL_ERROR so that the
error is logged as expected.
[1] See the implementation of daemonErrorLogFilter() for details:
e2f82a3704/src/remote/remote_daemon.c (L89)
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The calling function will log the error. Just return NULL if a device
cannot be found.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the new virXMLProp helpers and XPath queries to get rid of the old
style of iteration through element children.
Note that in case of def->blockio.logical_block_size,
def->blockio.physical_block_size and def->rotation_rate the wraparound
behaviour of 'virStrToLong_ui' was _not_ forward ported to the new code
as it makes no sense with the attributes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Changes to other places using switch statements were required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Changes to other places using switch statements were required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately virDomainSnapshotLocation is declared in snapshot_conf.h
which includes domain_conf.h. To avoid a circular dependency use
'unsigned int' for now.
Use XML parser can use virXMLPropEnum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the rest of the validations to the vaidation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the setting of read-only state, the default disk bus and setting of
'snapshot' state for read-only disks to the post parse callback to clean
up the disk parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mark it explicitly as read only in accordance with the comment outlining
configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a disk bus value represending no selected bus. This will help split
up the XML parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modifications of the data such as this one don't belong into the parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The moved code contains only checks and does not modify the parsed
document so it doesn't belong into the PostParse code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unify the two distinct disk definition validators.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Consolidate the checks for '<reservations/>' and viritio queues under
already existing blocks which have the same condition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's no code which would assert it at this point. Remove the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extract all code related to parsing data which ends up in the 'src'
member of a virDomainDiskDef.
This allows to use the new function directly in
virDomainDiskDefParseSource and removes the use of the
VIR_DOMAIN_DEF_PARSE_DISK_SOURCE parser flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate the validation of the source so that it can be reused once we
split up the XML parser too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The <disk> XML element parser is going to be modified so that the
virStorageSource bits are pre-parsed. Add virDomainDiskDefNewSource,
which uses an existing 'src' pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainBlockCopy needs just the source portion of the disk but uses
the disk parser for it. Since we have a specific function now, refactor
the code to avoid having to deal with the unused virDomainDiskDef.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a helper function which will parse the source portion of a <disk>.
The idea is to replace *virDomainDiskDefParse with
VIR_DOMAIN_DEF_PARSE_DISK_SOURCE with the new helper in the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the new macro instead of virXMLParseStringCtxt in places where the
root node is being validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some callers want to validate the root XML node name. Add the capability
to the parser helper to prevent open-coding.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows users to restrict memory nodes without setting any specific
memory policy, then 'restrictive' mode is useful.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The command line argument is called --hanshakefd (check out
lxc_controller.c:main()). But the command line builder puts only
--handshake. This works, because there is no other argument
sharing the prefix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
I've encountered the following bug, but only on Gentoo with
systemd and CGroupsV2. I've started an LXC container successfully
but destroying it reported the following error:
error: Failed to destroy domain 'amd64'
error: internal error: failed to get cgroup backend for 'pathOfController'
Debugging showed, that CGroup hierarchy is full of surprises:
/sys/fs/cgroup/machine.slice/machine-lxc\x2d861\x2damd64.scope/
└── libvirt
├── dev-hugepages.mount
├── dev-mqueue.mount
├── init.scope
├── sys-fs-fuse-connections.mount
├── sys-kernel-config.mount
├── sys-kernel-debug.mount
├── sys-kernel-tracing.mount
├── system.slice
│ ├── console-getty.service
│ ├── dbus.service
│ ├── system-getty.slice
│ ├── system-modprobe.slice
│ ├── systemd-journald.service
│ ├── systemd-logind.service
│ └── tmp.mount
└── user.slice
For comparison, here's the same container on recent Rawhide:
/sys/fs/cgroup/machine.slice/machine-lxc\x2d13550\x2damd64.scope/
└── libvirt
Anyway, those nested directories should not be a problem, because
virCgroupKillRecursiveInternal() removes them recursively, right?
Sort of. The function really does remove nested directories, but
it assumes that every directory has the same controller as the
rest. Just take a look at virCgroupV2KillRecursive() - it gets
'Any' controller (the first one it found in ".scope") and then
passes it to virCgroupKillRecursiveInternal().
This assumption is not true though. The controllers found in
".scope" are the following:
cpuset cpu io memory pids
while "libvirt" has fewer:
cpuset cpu io memory
Up until now it's not problem, because of how we order
controllers internally - "cpu" is the first and thus picking
"Any" controller returns just that. But the rest of directories
has no controllers, their "cgroup.controllers" is just empty.
What fixes the bug is dropping @controller argument from
virCgroupKillRecursiveInternal() and letting each iteration work
pick its own controller.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The VIR_CGROUP_BACKEND_CALL() macro gets a backend for controller
and calls corresponding callback in it. If either is NULL then an
error message is printed out. However, the error message contains
only the intended callback func and not controller or backend
found.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Currently, only a subset of virCgroupKillRecursiveInternal()
arguments is printed into debug logs. Print all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Convenience function to return the value of an enum XML attribute.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Convenience function to return the value of an unsigned integer XML attribute.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Convenience function to return the value of an integer XML attribute.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Convenience function to return the value of an on / off XML attribute.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Convenience function to return the value of a yes / no XML attribute.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Switch @xml and @pctxt to g_autofree and get rid of the "error" and
"cleanup" labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Move the reporting of parsing error on the error path of the parser as
other code paths report their own errors already.
Additionally prefer printing the 'url' as document name if provided
instead of "[inline data]" as that usually gives a better hint at least
which kind of XML is being parsed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Remove the "block" formatting of function declarations and use uniform
spacing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Note that the comment for virStoragePoolSourceDevice::part_separator was wrong.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Note that the comment for virStorageAdapterFCHost::managed was wrong.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Note that the wrong "VIR_TRISTATE_*_ABSENT" was used in qemuDomainChangeNet.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Coverity reported that this function can return NULL, so it should be
handled properly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently virMediatedDeviceGetIOMMUGroupDev() looks up the iommu group
number and uses that to construct a path to the iommu group device.
virMediatedDeviceGetIOMMUGroupNum() then uses that device path and takes
the basename to get the group number. That's unnecessary extra string
manipulation for *GroupNum(). Reverse the implementations and make
*GroupDev() call *GroupNum().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
virMediatedDeviceGetSysfsPath() (via g_strdup_printf()) is guaranteed to
return a non-NULL value, so remove the unnecessary checks for NULL.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Fixes: 8fe30b2167
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Over several years of debugging reports related to VM shutdown, destruction,
and cleanup, I've found that logging of all events received from libxl and
logging the entry of libxlDomainCleanup has proven useful. Add the these
debug messages upstream to aid in future debugging.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When querying guest info via virDomainGetGuestInfo() the
'guest-get-disks' agent command is called. It may report disk
serial number which we parse, but never report nor use for
anything else.
As it turns out, it may help management application find matching
disk in their internals.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-By: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When running on systemd host the cgroup itself is removed by machined
so when we reach this code the directory no longer exist. If libvirtd
was running the whole time between starting and destroying VM the
detection is skipped because we still have both FD in memory. But if
libvirtd was restarted and no operation requiring cgroup devices
executed the FDs would be 0 and libvirt would try to detect them using
the cgroup directory. This results in reporting following errors:
libvirtd[955]: unable to open '/sys/fs/cgroup/machine.slice/machine-qemu\x2d1\x2dguest.scope/': No such file or directory
libvirtd[955]: Failed to remove cgroup for guest
When running on non-systemd host where we handle cgroups manually this
would not happen.
When destroying VM it is not necessary to detect the BPF prog and map
because the following code only closes the FDs without doing anything
else. We could run code that would try to detach the BPF prog from the
cgroup but that is not necessary as well. If the cgroup is removed and
there is no other FD open to the prog kernel will cleanup the prog and
map eventually.
Reported-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When nested cgroup was introduced it did not properly free file
descriptors for BPF prog and map. With nested cgroups we create the BPF
bits in the nested cgroup instead of the VM root cgroup.
This would leak the FDs which would be the last reference to the prog
and map so kernel would not remove the resources as well. It would only
happen once libvirtd process exits.
Fixes: 184245f53b
Reported-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After all devices were enumerated, the enumeration thread call
nodeDeviceUpdateMediatedDevices() to refresh the state of
mediated devices. This means that 'mdevctl' will be executed. But
it may be missing on some systems (e.g. mine) in which case we
should just skip the update of mdevs instead of failing whole
device enumeration.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
To speed up nodedev driver initialization, the device enumeration
is done in a separate thread. Once finished, the thread sets a
boolean variable that allows public APIs to be called (instead of
waiting for the thread to finish).
However, if there's an error in the device enumeration thread
then the control jumps over at the 'error' label and the boolean
is never set. This means, that any virNodeDev*() API is stuck
forever. Mark the initialization as complete (the thread is
quitting anyway) and let the APIs proceed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Although I have not experienced this in real life, there is a
possible race condition when creating new device, getting its XML
or parent or listing its capabilities. If the nodedev driver is
still enumerating devices (in a separate thread) and one of
virNodeDeviceGetXMLDesc(), virNodeDeviceGetParent(),
virNodeDeviceNumOfCaps(), virNodeDeviceListCaps() or
virNodeDeviceCreate() is called then it can lead to spurious
results because the device enumeration thread is removing devices
from or adding them to the internal list of devices (among with
their states).
Therefore, wait for things to settle down before proceeding with
any of the APIs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is more academic dispute than a real bug, but this is taken
from pthread_cond_broadcast(3p) man:
The pthread_cond_broadcast() or pthread_cond_signal() functions
may be called by a thread whether or not it currently owns the
mutex that threads calling pthread_cond_wait() or
pthread_cond_timedwait() have associated with the condition
variable during their waits; however, if predictable scheduling
behavior is required, then that mutex shall be locked by the
thread calling pthread_cond_broadcast() or
pthread_cond_signal().
Therefore, broadcast the initCond while the nodedev driver is
still locked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The consensus is to put the verb last. Therefore, the new name is
nodeDeviceInitWait(). This allows us to introduce new function
(done later in a separate commit) that will "complete" the device
initialization.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The comment for that option states that the default value is 'none' but
it was not set by the code. By default the value is NULL which results
into the following warning:
warning : qemuBuildCompatDeprecatedCommandLine:10393 : Unsupported deprecation behavior '(null)' for VM 'test'
Fixes: 7004504493
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The g_path_is_absolute() considers more situations
than just a simply "path[0] == '/'".
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When doing a blockpull with NULL base the full contents of the disk are
pulled into the topmost image which then becomes fully self-contained.
qemuBlockJobProcessEventCompletedPull doesn't install the backing chain
terminators though, although it's guaranteed that there will be no
backing chain behind disk->src.
Add the terminators for completness and for disabling backing chain
detection on further boots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When doing a full block pull job (base == NULL) and the config XML
contains a compatible disk, the completer function would leave a
dangling pointer in 'cfgdisk->src->backingStore' as cfgdisk->src would
be set to the value of 'cfgbase' which was always set to
'cfgdisk->src->backingStore'.
This is wrong though since for the live definition XML we set the
respective counterpart to 'job->data.pull.base' which is NULL in the
above scenario.
This leads to a invalid pointer read when saving the config XML and may
end up in a crash.
Resolve it by setting 'cfgbase' only when 'job->data.pull.base' is
non-NULL.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1946918
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
During its initialization, the nodedev driver tries to set up
monitors for /etc/mdevctl.d directory, so that it can register
mdevs as they come and go. However, if the file doesn't exist
there is nothing to monitor and therefore we can exit early. In
fact, we have to otherwise monitorFileRecursively() fails and
whole driver initialization fails with it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
During the nodedev driver initialization two threads are created:
one for listening on udev events (like device plug/unplug) and
the other for enumerating devices (so that the main thread doing
the driver init is not blocked). If something goes wrong at any
point then nodeStateCleanup() is called which joins those two
threads (possibly) created before. But it tries to join them even
they weren't created which is undefined behaviour (and it just so
happens that it crashes on my system).
If those two virThread variables are turned into pointers then we
can use comparison against NULL to detect whether threads were
created.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The nodedev driver private data object @priv is created by
calling udevEventDataNew(). After that, driver->privateData
pointer is set to the freshly allocated object and only a few
lines after all of this the object is locked. Technically it is
safe because there should not be any other thread at this point,
but defensive style of programming says it's better if the object
is locked before driver's privateData is set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If initialization of priv->mdevctlMonitors fails, then the
control jumps over to cleanup label where nodeStateCleanup() is
called which tries to lock @priv. But since @priv was already
locked before taking the jump a deadlock occurs. The solution is
to jump onto @unlock label, just like the code around is doing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In commit ad80bba90a I mistakenly didn't delete '**' from the
variable declaration when converting it to 'GStrv' and deleted the
'separator' variable since it was declared on the same line as a
different variable.
Fixes: ad80bba90a
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Move calls to virStorageBackendFileSystemMountAddOptions earlier so that
the options are formatted before the positional arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Put multiple values for an option if followed by another option as used
in certain iptables arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virCommandToStringFull used internally when virCommandSetDryRun is
requested allows to strip command path and wrap lines nicely. Expose
these via virCommandSetDryRun so that tests can use those features
instead of local hacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While virCommandSetDryRun is used in tests only, there were some cases
when error paths would not call the function with NULL arguments to
reset the dry run infrastructure.
Introduce virCommandDryRunToken type which must be allocated via
virCommandDryRunTokenNew and passed to virCommandSetDryRun.
This way we can use automatic variable cleaning to trigger the cleanup
of virCommandSetDryRun parameters and also the use of the token variable
ensures that all callers of virCommandSetDryRun clean up after
themselves and also that the token isn't left unused in the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In tests we don't want to use the full path to commands as it's
unpleasant to keep that working on all systems.
Add an integrated way to strip the prefix which will be used to replace
virTestClearCommandPath() as a more systemic solution.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Callers which need the count of elements now count it in place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the code invokes the string list length calculation twice, it
happens only on error path, which by itself should never happen.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_strsplit instead of virStringSplitCount and automatically free the
temporary string list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In 3 of 4 instances the code didn't even need the count of the elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the handling of variables so that the cleanup section can be
sanitized.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove 'cleanup' and 'error' labels by switching 'ret' to automatic
pointer and stealing it in the return statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move variables into the loop which uses them and use automatic freeing
for temporarily allocated variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move variables into the loop which uses them and use automatic freeing
for temporarily allocated variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both instances just check the length once. Replicate that faithfully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use str(r)chr to find the correct bit rather than fully splitting the
string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unfortunately here we do need the count of elements. Use g_strv_length
to calculate it so that virStringSplitCount can be removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the code to remove the need to calculate the string list count.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the code to remove the need to calculate the string list count.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The presence of the second element can be checked by looking at it
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The presence of the second element can be checked by looking at it
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prevent unbounded chains by limiting the recursion depth of
virStorageSourceGetMetadataRecurse to the maximum number of image layers
we limit anyways.
This removes the last use of virStorageSourceGetUniqueIdentifier which
will allow us to delete some crusty old infrastructure which isn't
really needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is used only inside of the file. We can open-code it and
remove it as it's not very useful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add a simpler algorithm converting the JSON array to bitmap so that
virJSONValueGetArrayAsBitmap can be removed in next step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Follow best practices and add a unsigned int flags parameter to these
new APIs that have not been in a release yet.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The comments mistakenly say 7.2.0, when they were actually merged during
the 7.3 development cycle.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When calling virNodeDeviceDefineXML() to define a new mediated device,
we call virMdevctlDefine() and then wait for the new device to appear in
the driver's device list before returning. This caused long delays due
to the behavior of nodeDeviceFindNewMediatedDevice(). This function
checks to see if the device is in the list and then waits for 5s before
checking again.
Because mdevctl is relatively slow to query the list of defined
devices[0], the newly-defined device was generally not in the device
list when we first checked. This results in libvirt almost always taking
at least 5s to complete this API call for mediated devices, which is
unacceptable.
In order to avoid this long delay, we resort to a workaround. If the
call to virMdevctlDefine() was successful, we can assume that this new
device will exist the next time we query mdevctl for new devices. So we
simply add this provisional device definition directly to the nodedev
driver's device list and return from the function. At some point in the
future, the mdevctl handler will run and the "official" device will be
processed, which will update the provisional device if any new details
need to be added.
The reason that this is not necessary for virNodeDeviceCreateXML() is
because detecting newly-created (not defined) mdevs happens through
udev instead of mdevctl. And nodeDeviceFindNewMediatedDevice() always
calls 'udevadm settle' before checking to see whether the device is in
the list. This allows us to wait just long enough for all udev events to
be processed, so the device is almost always in the list the first time
we check and so we almost never end up hitting the 5s sleep.
[0] on my machine, 'mdevctl list --defined' took around 0.8s to
complete for only 3 defined mdevs.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
To accomodate re-use of this functionality in a following patch, split
out the processing of an individual mdev definition into a separate
function.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Calling `mdevctl stop` for a mediated device that is in use by an active
domain will block until that vm exits (or the vm closes the device).
Since the nodedev driver cannot query the hypervisor driver to see
whether any active domains are using the device, we resort to a
workaround that relies on the fact that a vfio group can only be opened
by one user at a time. If we get an EBUSY error when attempting to open
the group file, we assume the device is in use and refuse to try to
destroy that device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the new <uuid> element in the mdev caps to define and start devices
with a specific UUID.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It will be useful to be able to specify a particular UUID for a mediated
device when defining the node device. To accomodate that, allow this to
be specified in the xml schema. This patch also parses and formats that
value to the xml, but does not yet use it.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This new API function provides a way to start a persistently-defined
mediate device that was defined by virNodeDeviceDefineXML() (or one that
was defined externally via mdevctl)
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This interface allows you to undefine a persistently defined (but
inactive) mediated devices. It is implemented via 'mdevctl'
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
With mediated devices, we can now define persistent node devices that
can be started and stopped. In order to take advantage of this, we need
an API to define new node devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Abstract out the function used to generate the commandline for 'mdevctl
start' since they take the same arguments. Add tests to ensure that
we're generating the command properly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We need to query mdevctl for changes to device definitions since an
administrator can define new devices by executing mdevctl outside of
libvirt.
In the future, mdevctl may add a way to signal device add/remove via
events, but for now we resort to a bit of a workaround: monitoring the
mdevctl config directory for changes to files. When a change is
detected, we query mdevctl and update our device list. The mdevctl
querying is handled in a throwaway thread, and these threads are
synchronized with a mutex.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
mdevctl does not currently provide any events when the list of defined
devices changes, so we will need to poll mdevctl for the list of defined
devices periodically. When a mediated device no longer exists from one
iteration to the next, we need to treat it as an "undefine" event.
When we get such an event, we remove the device from the list if it's
not active. Otherwise, we simply mark it as non-persistent.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When a mediated device is stopped or undefined by an application outside
of libvirt, we need to remove it from our list of node devices within
libvirt. This patch introduces virNodeDeviceObjListRemoveLocked() and
virNodeDeviceObjListForEachRemove() (which are analogous to other types
of object lists in libvirt) to facilitate that. They will be used in
coming commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
At startup, query devices that are defined by 'mdevctl' and add them to
the node device list.
This adds a complication: we now have two potential sources of
information for a node device:
- udev for all devices and for activated mediated devices
- mdevctl for persistent mediated devices
Unfortunately, neither backend returns full information for a mediated
device. For example, if a persistent mediated device in the list (with
information provided from mdevctl) is 'started', that same device will
now be detected by udev. If we simply overwrite the existing device
definition with the new one provided by the udev backend, we will lose
extra information that was provided by mdevctl (e.g. attributes, etc).
To avoid this, make sure to copy the extra information into the new
device definition.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Consistent with other objects (e.g. virDomainObj), add a field to
indicate whether the node device is persistent or transient.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This adds an internal API to query for persistent mediated devices
that are defined by mdevctl. Upcoming commits will make use of this
information.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This function will parse the list of mediated devices that are returned
by mdevctl and convert it into our internal node device representation.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Expose a helper function that can be used by udev and mdevctl to
generate device names for node devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It doesn't make sense to list all of the flag values in the function
documentation. This is unnecessary duplication, we already refer to the
enum type. Also, remove reference to exclusive groups of flags, since
that does not apply to this API.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add two flag values for virConnectListAllNodeDevices() so that we can
list only node devices that are active or inactive.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
we will be able to define mediated devices that can be started or
stopped, so we need to be able to indicate whether the device is active
or not, similar to other resources (storage pools, domains, etc.)
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When an mdevctl command fails, there is not much information available
to the user about why it failed. This is partly because we were not
making use of the error message that mdevctl itself prints upon failure.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This makes it possible to enable stable NIC device names in most modern
Linux distros.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This property is exposed by QEMU on any PCI device, but we have to pick
some specific device(s) to probe it against. We expect that at least one
of the virtio devices will be present, so probe against them.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The compiler can more easily optimize a switch, and more importantly can
also warn when new address types are added which are not handled.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
PCI devices can be associated with a unique integer index that is
exposed via ACPI. In Linux OS with systemd, this value is used for
provide a NIC device naming scheme that is stable across changes
in PCI slot configuration.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Enable '-compat' if requested in qemu.conf and supported by qemu to
instruct qemu to crash when a deprecated command is used and stop
returning deprecated fields.
This setting is meant for libvirt developers and such.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Similar to the qemu.conf knob 'deprecation_behavior' add a per-VM knob
in the QEMU namespace:
<qemu:deprecation behavior='...'/>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
New QEMU supports a harsh, but hard to ignore way to notify that the
QMP user used a deprecated command. This is useful e.g. for developers
to see that something needs to be fixed.
This patch introduces a qemu.conf option to enable the setting in cases
when qemu supports it so that developers and continiuous integration
efforts are notified about use of deprecated fields before it's too
late.
The option is deliberately stored as string and not validated to prevent
failures when downgrading qemu or libvirt versions. While we don't
support this, the knob isn't meant for public consumption anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The capability is asserted if qemu supports the -compat
deprecated-input= and deprecated-output= settings to control what should
happen if deprecated fields are used in QMP.
This will be used for a developer/tester-oriented setting which will
aid us in catching use of deprecated settings sooner.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_set_memory_target, which changed the storage size of
parameter "target_memkb" in Xen 4.8.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_send_trigger, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_set_vcpuonline, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_get_free_memory, which changed storage size of parameter
"memkb" in Xen 4.8.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_need_memory, which changed the storage size of
"need_memkb" in Xen 4.8. With Xen 4.12 the libxl_domain_config
parameter was changed
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_unpause, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_pause, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_reboot, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_shutdown, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_retrieve_domain_configuration, which got a new parameter
"libxl_asyncop_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_create_restore, which got a new parameter
"send_back_fd" in Xen 4.7. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This is available in QEMU with "ide-hd" and "scsi-hd" device
types. It was originally mistakenly added to the "scsi-block"
device type too, but later removed. This doesn't affect libvirt
since we restrict usage to device=disk.
When this property is not set then QEMU's default behaviour
is to not report any rotation rate information, which
causes most guest OS to assume rotational storage.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This lets the app expose the virtual SCSI or IDE disks as solid state
devices by setting a rate of '1', or rotational media by setting a
rate between 1025 and 65534.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Previously, we accepted empty bridge name, because some old versions of
VMWare Workstation did not put it into the config. But this doesn't make
much sense - to have an interface type bridge with no name. We
circumvented this problem by generating an empty name but that is
equally wrong.
Therefore, fill in missing bridge names (according to the documentation
[1] the default bridge name is VMnet0) and error out if bridge name is
missing.
This partially reverts f246cdb5ac
1: https://docs.vmware.com/en/VMware-Workstation-Player-for-Linux/16.0/com.vmware.player.linux.using.doc/GUID-BAFA66C3-81F0-4FCA-84C4-D9F7D258A60A.html
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The
<os firmware='efi'>
<firmware type='efi'>
<feature enabled='no' name='enrolled-keys'/>
</firmware>
</os>
repeats the firmware attribute twice. This has no functional benefit, as
evidenced by fact that we use a single struct field to store both
attributes, while needlessly introducing an error scenario. The XML can
just be simplified to:
<os firmware='efi'>
<firmware>
<feature enabled='no' name='enrolled-keys'/>
</firmware>
</os>
which also means that we don't need to emit the empty element
<firmware type='efi'/> for all existing configs too.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This API talks to QEMU and changes its internal state. Therefore,
it should acquire QEMU_JOB_MODIFY instead of QEMU_JOB_QUERY.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This API interacts with the hypervisor and makes changes to its
behaviour, so must be protected by the write permission.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
