Rename to avoid duplicate code. Because virDomainMemoryAccess will be
used in memorybacking for setting default behaviour.
NOTE: The enum cannot be moved to qemu/domain_conf because of headers
dependency
https://bugzilla.redhat.com/show_bug.cgi?id=1413922
While all the code that deals with qemu namespaces correctly
detects whether we are running as root (and turn into NO-OP for
qemu:///session) the actual unshare() call is not guarded with
such check. Therefore any attempt to start a domain under
qemu:///session shall fail as unshare() is reserved for root.
The fix consists of moving unshare() call (for which we have a
wrapper called virProcessSetupPrivateMountNS) into
qemuDomainBuildNamespace() where the proper check is performed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
If we restart libvirtd while VM was doing external memory snapshot, VM's
state be updated to paused as a result of running a migration-to-file
operation, and then VM will be left as paused state. In this case we must
restart the VM's CPUs to resume it.
Signed-off-by: Wang King <king.wang@huawei.com>
After qemu delivers the resume event it's already running and thus it's
too late to enter lockspaces since it may already have modified the
disk. The code only creates false log entries in the case when locking
is enabled. The lockspace needs to be acquired prior to starting cpus.
Instead of trying to fix our security drivers, we can use a
simple trick to relabel paths in both namespace and the host.
I mean, if we enter the namespace some paths are still shared
with the host so any change done to them is visible from the host
too.
Therefore, we can just enter the namespace and call
SetAllLabel()/RestoreAllLabel() from there. Yes, it has slight
overhead because we have to fork in order to enter the namespace.
But on the other hand, no complexity is added to our code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Prime time. When it comes to spawning qemu process and
relabelling all the devices it's going to touch, there's inherent
race with other applications in the system (e.g. udev). Instead
of trying convincing udev to not touch libvirt managed devices,
we can create a separate mount namespace for the qemu, and mount
our own /dev there. Of course this puts more work onto us as we
have to maintain /dev files on each domain start and device
hot(un-)plug. On the other hand, this enhances security also.
From technical POV, on domain startup process the parent
(libvirtd) creates:
/var/lib/libvirt/qemu/$domain.dev
/var/lib/libvirt/qemu/$domain.devpts
The child (which is going to be qemu eventually) calls unshare()
to create new mount namespace. From now on anything that child
does is invisible to the parent. Child then mounts tmpfs on
$domain.dev (so that it still sees original /dev from the host)
and creates some devices (as explained in one of the previous
patches). The devices have to be created exactly as they are in
the host (including perms, seclabels, ACLs, ...). After that it
moves $domain.dev mount to /dev.
What's the $domain.devpts mount there for then you ask? QEMU can
create PTYs for some chardevs. And historically we exposed the
host ends in our domain XML allowing users to connect to them.
Therefore we must preserve devpts mount to be shared with the
host's one.
To make this patch as small as possible, creating of devices
configured for domain in question is implemented in next patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the cpuset cgroup controller is disabled in /etc/libvirt/qemu.conf
QEMU virtual machines can in principle use all host CPUs, even if they
are hot plugged, if they have no explicit CPU affinity defined.
However, there's libvirt code supposed to handle the situation where
the libvirt daemon itself is not using all host CPUs. The code in
qemuProcessInitCpuAffinity attempts to set an affinity mask including
all defined host CPUs. Unfortunately, the resulting affinity mask for
the process will not contain the offline CPUs. See also the
sched_setaffinity(2) man page.
That means that even if the host CPUs come online again, they won't be
used by the QEMU process anymore. The same is true for newly hot
plugged CPUs. So we are effectively preventing that QEMU uses all
processors instead of enabling it to use them.
It only makes sense to set the QEMU process affinity if we're able
to actually grow the set of usable CPUs, i.e. if the process affinity
is a subset of the online host CPUs.
There's still the chance that for some reason the deliberately chosen
libvirtd affinity matches the online host CPU mask by accident. In this
case the behavior remains as it was before (CPUs offline while setting
the affinity will not be used if they show up later on).
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Since its introduction in 2012 this internal API did nothing.
Moreover we have the same API that does exactly the same:
virSecurityManagerDomainSetPathLabel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If you've ever tried running a huge page backed guest under
different user than in qemu.conf, you probably failed. Problem is
even though we have corresponding APIs in the security drivers,
there's no implementation and thus we don't relabel the huge page
path. But even if we did, so far all of the domains share the
same path:
/hugepageMount/libvirt/qemu
Our only option there would be to set 0777 mode on the qemu dir
which is totally unsafe. Therefore, we can create dir on
per-domain basis, i.e.:
/hugepageMount/libvirt/qemu/domainName
and chown domainName dir to the user that domain is configured to
run under.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If libvirtd is running unprivileged, it can open a device's PCI config
data in sysfs, but can only read the first 64 bytes. But as part of
determining whether a device is Express or legacy PCI,
qemuDomainDeviceCalculatePCIConnectFlags() will be updated in a future
patch to call virPCIDeviceIsPCIExpress(), which tries to read beyond
the first 64 bytes of the PCI config data and fails with an error log
if the read is unsuccessful.
In order to avoid creating a parallel "quiet" version of
virPCIDeviceIsPCIExpress(), this patch passes a virQEMUDriverPtr down
through all the call chains that initialize the
qemuDomainFillDevicePCIConnectFlagsIterData, and saves the driver
pointer with the rest of the iterdata so that it can be used by
qemuDomainDeviceCalculatePCIConnectFlags(). This pointer isn't used
yet, but will be used in an upcoming patch (that detects Express vs
legacy PCI for VFIO assigned devices) to examine driver->privileged.
Restarting libvirtd on the source host at the end of migration when a
domain is already running on the destination would cause image labels to
be reset effectively killing the domain. Commit e8d0166e1d fixed similar
issue on the destination host, but kept the source always resetting the
labels, which was mostly correct except for the specific case handled by
this patch.
https://bugzilla.redhat.com/show_bug.cgi?id=1343858
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Thanks to the complex capability caching code virQEMUCapsProbeQMP was
never called when we were starting a new qemu VM. On the other hand,
when we are reconnecting to the qemu process we reload the capability
list from the status XML file. This means that the flag preventing the
function being called was not set and thus we partially reprobed some of
the capabilities.
The recent addition of CPU hotplug clears the
QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS if the machine does not support it.
The partial re-probe on reconnect results into attempting to call the
unsupported command and then killing the VM.
Remove the partial reprobe and depend on the stored capabilities. If it
will be necessary to reprobe the capabilities in the future, we should
do a full reprobe rather than this partial one.
CPU models (and especially some additional details which we will start
probing for later) differ depending on the accelerator. Thus we need to
call query-cpu-definitions in both KVM and TCG mode to get all data we
want.
Tests in tests/domaincapstest.c are temporarily switched to TCG to avoid
having to squash even more stuff into this single patch. They will all
be switched back later in separate commits.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Sometimes after domain restart agent is unavailabe even
if it is up and running in guest. Diagnostic message is
"QEMU guest agent is not available due to an error"
that is 'priv->agentError' is set. Investiagion shows that
'priv->agent' is not NULL, so error flag is set probably
during domain shutdown process and not cleaned up eventually.
The patch is quite simple - just clean up error flag unconditionally
upon domain stop.
Other hunks address other cases when error flag is not cleaned up.
1. processSerialChangedEvent. We need to clean error flag
unconditionally here too. For example if upon first 'connected' event we
fail to connect and set error flag and then connect on second
'connected' event then error flag will remain set erroneously
and make agent unavailable.
2. qemuProcessHandleAgentEOF. If error flag is set and we get
EOF we need to change state (and diagnostic) from 'error' to
'not connected'.
qemuConnectAgent return -1 or -2 in case of different errors.
A. -1 is a case of unsuccessuful connection to guest agent.
B. -2 is a case of destoyed domain during connection attempt.
All qemuConnectAgent callers handle the first error the same way
so let's move this logic into qemuConnectAgent itself. Patched
function returns 0 in case A and -1 in case B.
Use the util function virHostdevIsSCSIDevice() to simplify if
statements.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Add missing checks if a hostdev is a subsystem/SCSI device before access
the union member 'subsys'/'scsi'. Also fix indentation and simplify
qemuDomainObjCheckHostdevTaint().
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
PPC driver needs to convert POWERx_v* legacy CPU model names into POWERx
to maintain backward compatibility with existing domains. This patch
adds a new step into the guest CPU configuration work flow which CPU
drivers can use to convert legacy CPU definitions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Detect on reconnect to a running qemu VM whether the alias of a
hotpluggable memory device (dimm) does not match the dimm slot number
where it's connected to. This is necessary as qemu is actually
considering the alias as machine ABI used to connect the backend object
to the dimm device.
This will require us to keep them consistent so that we can reliably
restore them on migration. In some situations it was currently possible
to create a mismatched configuration and qemu would refuse to restore
the migration stream.
To avoid breaking existing VMs we'll need to keep the old algorithm
though.
Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.
Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.
Add test for at least a serial chardev as an example.
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This initially started as a fix of some debug printing in
virCgroupDetect. However it turned out that other places suffer
from the similar problem. While dealing with pids, esp. in cases
where we cannot use pid_t for ABI stability reasons, we often
chose an unsigned integer type. This makes no sense as pid_t is
signed.
Also, new syntax-check rule is introduced so we won't repeat this
mistake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Before this patch we've checked qemu capabilities for video devices
only while constructing qemu command line using "-device" option.
Since we support qemu only if "-device" option is present we can use
the same capabilities to check also video devices while using "-vga"
option to construct qemu command line.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch simplifies QEMU capabilities for QXL video device. QEMU
exposes this device as *qxl-vga* and *qxl* and they are both the same
device with the same set of parameters, the only difference is that
*qxl-vga* includes VGA compatibility.
Based on QEMU code they are tied together so it's safe to check only for
presence of only one of them.
This patch also removes an invalid test case "video-qxl-sec-nodevice"
where there is only *qxl-vga* device and *qxl* device is not present.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If attaching to a qemu process fails after opening the monitor socket
libvirt does not clean up the monitor. As the monitor also holds a
reference to the domain object the qemu attach API basically leaks it.
QEMU also does not interact on a second monitor connection and thus a
further attempt to attach to it would lock up.
Prevent libvirt from leaking the monitor by explicitly closing it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378401
The current code that validates duplicate vcpu order would not work
properly if the order would exceed def->maxvcpus. Limit the order to the
interval described.
The bitmap indexes for the order duplicate check are shifted to 0 since
vcpu order 0 is not allowed. The error message doesn't need such
treating though.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370360
The reworked API is now called virCPUUpdate and it should change the
provided CPU definition into a one which can be consumed by the QEMU
command line builder:
- host-passthrough remains unchanged
- host-model is turned into custom CPU with a model and features
copied from host
- custom CPU with minimum match is converted similarly to host-model
- optional features are updated according to host's CPU
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemu_command.c should deal with translating our domain definition into a
QEMU command line and nothing else.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We have a few of senarios that libvirtd would invoke qemuProcessStop
and leave a "shutting down" in /var/log/libvirt/qemu/$DOMAIN.log.
The shutoff reason showing in debug log is also very important
for us to know why VM shutting down in domain log,
as we seldom enable debug log of libvirtd.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
