This will skip few steps from qemuProcessStart in order to create only
qemu CMD. Use a VIR_QEMU_PROCESS_START_PRETEND for all the qemuProcess*
functions called by this one to not modify or check host.
This new function will be used later on for XMLToNative API and also for
qemuxml2argvtest to make sure that both API and test uses the same code
as qemuProcessStart.
We need also update qemuProcessInit to wrap few lines of code with check
that VIR_QEMU_PROCESS_START_PRETEND that makes sense only for
qemuProcessStart.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all code that checks host and domain. Do not check host if we use
VIR_QEMU_PROCESS_START_PRETEND flag.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all code that modifies only live XML to this function. The new
VIR_QEMU_PROCESS_START_PRETEND flag will be used by qemuXMLToNative and
qemuxml2argvtest later in order to reuse the same code as
qemuProcessStart uses.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The postParse callback is the correct place to generate default values
that should be present in offline XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When migration fails in the post-copy mode, it's impossible to just kill
the destination domain and resume the source since the source no longer
contains current guest state. Let's mark domains on both sides as
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED to let the upper layer decide what to
do with them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When destination libvirtd is restarted during migration in Finish phase
just after the point we started guest CPUs, we should not kill the
domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Migration enters "postcopy-active" state after QEMU switches to
post-copy and pauses guest CPUs. From libvirt's point of view this state
is similar to "completed" because we need to transfer guest execution to
the destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If use of virtlogd is enabled, then use it for backing the
character device log files too. This avoids the possibility
of a guest denial of service by writing too much data to
the log file.
With a very old QEMU which doesn't support events we need to explicitly
call qemuMigrationSetOffline at the end of migration to update our
internal state. On the other hand, if we talk to QEMU using QMP, we
should just wait for the STOP event and let the event handler update the
state and trigger a libvirt event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessSetupEmulator runs at a point in time where there is only
the qemu main thread. Use virCgroupAddTask to put just that one task
into the emulator cgroup. That patch makes virCgroupMoveTask and
virCgroupAddTaskStrController obsolete.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Move qemuProcessSetupEmulator up under qemuSetupCgroup. That way
we move the one main thread right into the emulator cgroup, instead
of moving multiple threads later on. And we do not actually want any
threads running in the parent cgroups (cpu cpuacct cpuset).
Signed-off-by: Henning Schild <henning.schild@siemens.com>
This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory. It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar. If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca334). However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited. In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains). That way we can change it
in the future.
The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In case you will specify graphics like this:
<graphics type='spice' port='-1'/>
or
<graphics type='spice' port='-1' tlsPort='6000'/>
libvirt will automatically add autoport='no'. This leads to an issue
that in qemuProcessStop() we don't release that port because we are
releasing both port if autoport=yes or only port marked as reserved.
If autoport=no but we request to generate port via '-1' we need to mark
that port as reserved in order to release it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1299696
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Calling qemuProcessStop without a job opens a way to race conditions
with qemuDomainObjExitMonitor called in another thread. A real world
example of such a race condition:
- migration thread (A) calls qemuMigrationWaitForSpice
- another thread (B) starts processing qemuDomainAbortJob API
- thread B signals thread A via qemuDomainObjAbortAsyncJob
- thread B enters monitor (qemuDomainObjEnterMonitor)
- thread B calls qemuMonitorSend
- thread A awakens and calls qemuProcessStop
- thread A calls qemuMonitorClose and sets priv->mon to NULL
- thread B calls qemuDomainObjExitMonitor with priv->mon == NULL
=> monitor stays ref'ed and locked
Depending on how lucky we are, the race may result in a memory leak or
it can even deadlock libvirtd's event loop if it tries to lock the
monitor to process an event received before qemuMonitorClose was called.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Stopping a domain without a job risks a race condition with another
thread which started a job a which does not expect anyone else to be
messing around with the same domain object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When destroying a domain we need to make sure we will be able to start a
job no matter what other operations are running or even stuck in a job.
This is done by killing the domain before starting the destroy job.
Let's introduce qemuProcessBeginStopJob which combines killing a domain
and starting a job in a single API which can be called everywhere we
need a job to stop a domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Create new modules qemu_domain_address.c and qemu_domain_address.h to
contain all the new functions and header data. Additionally move any
supporting static functions.
Make qemuDomainSupportsPCI non static.
Also, move and rename the following:
qemuSetSCSIControllerModel to qemuDomainSetSCSIControllerModel
qemuCollectPCIAddress to qemuDomainCollectPCIAddress
qemuValidateDevicePCISlotsPIIX3 to qemuDomainValidateDevicePCISlotsPIIX3
qemuAssignDevicePCISlots to qemuDomainAssignDevicePCISlots
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1293351
Since we already have virtio channel events, we know when guest
agent within guest has (dis-)connected. Instead of us blindly
connecting to a socket that no one is listening to, we can just
follow what qemu-ga does. This has a nice benefit that we don't
need to 'guest-ping' the agent just to timeout and find out
nobody is listening.
The way that this commit is implemented:
- don't connect in qemuProcessLaunch directly, defer that to event
callback (which already follows the agent) -
processSerialChangedEvent
- after migration is settled, before we resume vCPUs, ask qemu
whether somebody is listening on the socket and if so, connect
to it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than iterating 3 times for various settings this function
aggregates all the code into single place. One of the other advantages
is that it can then be reused for properly setting IOThread info on
hotplug.
Rather than iterating 3 times for various settings this function
aggregates all the code into single place. One of the other advantages
is that it can then be reused for properly setting vCPU info on hotplug.
With this approach autoCpuset is also used when setting the process
affinity rather than just via cgroups.
Due to bad design the vcpu sched element is orthogonal to the way how
the data belongs to the corresponding objects. Now that vcpus are a
struct that allow to store other info too, let's convert the data to the
sane structure.
The helpers for the conversion are made universal so that they can be
reused for iothreads too.
This patch also resolves https://bugzilla.redhat.com/show_bug.cgi?id=1235180
since with the correct storage approach you can't have dangling data.
When starting a qemu process there are certain checks done to ensure
that the configuration makes sense. Extract them into a separate
function so that they can be reused in the test code.
So, systemd-machined has this philosophy that machine names are like
hostnames and hence should follow the same rules. But we always allowed
international characters in domain names. Thus we need to modify the
machine name we are passing to systemd.
In order to change some machine names that we will be passing to systemd,
we also need to call TerminateMachine at the end of a lifetime of a
domain. Even for domains that were started with older libvirt. That
can be achieved thanks to virSystemdGetMachineNameByPID(). And because
we can change machine names, we can get rid of the inconsistent and
pointless escaping of domain names when creating machine names.
So this patch modifies the naming in the following way. It creates the
name as <drivername>-<id>-<name> where invalid hostname characters are
stripped out of the name and if the resulting name is longer, it
truncates it to 64 characters. That way we can start domains we
couldn't start before. Well, at least on systemd.
To make it work all together, the machineName (which is needed only with
systemd) is saved in domain's private data. That way the generation is
moved to the driver and we don't need to pass various unnecessary
arguments to cgroup functions.
The only thing this complicates a bit is the scope generation when
validating a cgroup where we must check both old and new naming, so a
slight modification was needed there.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1282846
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virDomainObjFormat and virDomainSaveStatus methods
both call into virDomainDefFormat, so should be providing
a non-NULL virCapsPtr instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virDomainSaveConfig calls virDomainDefFormat which was setting the caps
to NULL, thus keeping the old behaviour (i.e. not looking at
netprefix). This patch adds the virCapsPtr to the function and allows
the configuration to be saved and skipping interface names that were
registered with virCapabilitiesSetNetPrefix().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
This patch creates two bitmaps, one for macvlan device names and one
for macvtap. The bitmap position is used to indicate that libvirt is
currently using a device with the name macvtap%d/macvlan%d, where %d
is the position in the bitmap. When requested to create a new
macvtap/macvlan device, libvirt will now look for the first clear bit
in the appropriate bitmap and derive the device name from that rather
than just starting at 0 and counting up until one works.
When libvirtd is restarted, the qemu driver code that reattaches to
active domains calls the appropriate function to "re-reserve" the
device names as it is scanning the status of running domains.
Note that it may seem strange that the retry counter now starts at
8191 instead of 5. This is because we now don't do a "pre-check" for
the existence of a device once we've reserved it in the bitmap - we
move straight to creating it; although very unlikely, it's possible
that someone has a running system where they have a large number of
network devices *created outside libvirt* named "macvtap%d" or
"macvlan%d" - such a setup would still allow creating more devices
with the old code, while a low retry max in the new code would cause a
failure. Since the objective of the retry max is just to prevent an
infinite loop, and it's highly unlikely to do more than 1 iteration
anyway, having a high max is a reasonable concession in order to
prevent lots of new failures.
So I can observe this crasher that with freshly started daemon
(and virtlogd enabled) I am trying to startup a domain that
immediately dies (because it's said to use huge pages but I
haven't allocated a single one in the pool). Hardly reproducible
with -O0 or under valgrind. But I just got lucky:
==20469== Invalid write of size 8
==20469== at 0x4C2E99B: memcpy@GLIBC_2.2.5 (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==20469== by 0x217EDD07: qemuProcessReadLog (qemu_process.c:1670)
==20469== by 0x217EDE1D: qemuProcessReportLogError (qemu_process.c:1696)
==20469== by 0x217EE8C1: qemuProcessWaitForMonitor (qemu_process.c:1957)
==20469== by 0x217F6636: qemuProcessLaunch (qemu_process.c:4955)
==20469== by 0x217F71A4: qemuProcessStart (qemu_process.c:5152)
==20469== by 0x21846582: qemuDomainObjStart (qemu_driver.c:7396)
==20469== by 0x218467DE: qemuDomainCreateWithFlags (qemu_driver.c:7450)
==20469== by 0x21846845: qemuDomainCreate (qemu_driver.c:7468)
==20469== by 0x5611CD0: virDomainCreate (libvirt-domain.c:6753)
==20469== by 0x125D9A: remoteDispatchDomainCreate (remote_dispatch.h:3613)
==20469== by 0x125CB7: remoteDispatchDomainCreateHelper (remote_dispatch.h:3589)
==20469== Address 0x27a52ad0 is 0 bytes after a block of size 5,584 alloc'd
==20469== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==20469== by 0x9B8D1DB: xdr_string (in /lib64/libc-2.21.so)
==20469== by 0x563B39C: xdr_virLogManagerProtocolNonNullString (log_protocol.c:24)
==20469== by 0x563B6B7: xdr_virLogManagerProtocolDomainReadLogFileRet (log_protocol.c:123)
==20469== by 0x164B34: virNetMessageDecodePayload (virnetmessage.c:407)
==20469== by 0x5682360: virNetClientProgramCall (virnetclientprogram.c:379)
==20469== by 0x563B30E: virLogManagerDomainReadLogFile (log_manager.c:272)
==20469== by 0x217CD613: qemuDomainLogContextRead (qemu_domain.c:2485)
==20469== by 0x217EDC76: qemuProcessReadLog (qemu_process.c:1660)
==20469== by 0x217EDE1D: qemuProcessReportLogError (qemu_process.c:1696)
==20469== by 0x217EE8C1: qemuProcessWaitForMonitor (qemu_process.c:1957)
==20469== by 0x217F6636: qemuProcessLaunch (qemu_process.c:4955)
This points to memmove() in qemuProcessReadLog(). Imagine we just
read the following string from qemu:
"abc\n2016-01-18T09:40:44.022744Z qemu-system-x86_64: Error\n"
After the first pass of the while() loop in the
qemuProcessReadLog() (in which we have taken the false branch in
the if) @buf still points to the beginning of the string,
@filter_next points to the beginning of the second line. So we
start second iteration because there is yet another newline
character at the end. In this iteration @eol points to it
actually. Now, the control gets inside true branch of if(). Just
to remind you:
got = 58
filter_next = buf + 5,
eol = buf + 58.
Therefore skip = 54 which is correct. The message we want to skip
is 54 bytes long. However:
memmove(filter_next, eol + 1, (got - skip) +1);
which is
memmove(filter_next, eol + 1, 5)
is obviously wrong as there is only one byte we can access, not 5!
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit a41c00b472.
After much testing and upstream discussion this has been deemed to be
the incorrect operation since it means we no longer have any guarantee
about which resource controllers the QEMU processes in general are in.
So, you try to start a domain, but before we even get to the part
where chardev part of qemu command line is generated (and
possibly missing path to unix sockets is made up) an error occurs
which results in calling qemuProcessStop. This will then try to
clean up the mess and possibly ends up calling unlink(NULL).
==8085== Thread 3:
==8085== Syscall param unlink(pathname) points to unaddressable byte(s)
==8085== at 0xA85EA57: unlink (in /lib64/libc-2.21.so)
==8085== by 0x213D3C24: qemuProcessCleanupChardevDevice (qemu_process.c:2866)
==8085== by 0x558D6B1: virDomainChrDefForeach (domain_conf.c:22924)
==8085== by 0x213DA9AE: qemuProcessStop (qemu_process.c:5326)
==8085== by 0x213DA2F2: qemuProcessStart (qemu_process.c:5190)
==8085== by 0x2142957F: qemuDomainObjStart (qemu_driver.c:7396)
==8085== by 0x214297DB: qemuDomainCreateWithFlags (qemu_driver.c:7450)
==8085== by 0x21429842: qemuDomainCreate (qemu_driver.c:7468)
==8085== by 0x5611B95: virDomainCreate (libvirt-domain.c:6753)
==8085== by 0x125D9A: remoteDispatchDomainCreate (remote_dispatch.h:3613)
==8085== by 0x125CB7: remoteDispatchDomainCreateHelper (remote_dispatch.h:3589)
==8085== by 0x568BF41: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
==8085== Address 0x0 is not stack'd, malloc'd or (recently) free'd
==8085==
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While this is no functional change, whole channel definition is
going to be needed very soon. Moreover, while touching this obey
const correctness rule in qemuAgentOpen() - so far it was passed
regular pointer to channel config even though the function is
expected to not change pointee at all. Pass const pointer
instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The structure actually contains migration statistics rather than just
the status as the name suggests. Renaming it as
qemuMonitorMigrationStats removes the confusion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
My commit 674afcb09e moved computing the
default listen address from qemuMigrationPrepareAny to
qemuMigrationPrepareIncoming. However, I didn't notice listenAddress was
later passed to qemuMigrationStartNBDServer. Thus, it would be called
with the original value of listenAddress (NULL).
Let's add the updated listen address to qemuProcessIncomingDef and use
it when starting NBD servers.
Reported-by: Michael Chapman <mike@very.puzzling.org>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In commit 686eb7a24f, the break was not considered part of the
condition, hence breaking after first node when searching.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The machine cgroup is a superset, a parent to the emulator and vcpuX
cgroups. The parent cgroup should never have any tasks directly in it.
In fact the parent cpuset might contain way more cpus than the sum of
emulatorpin and vcpupins. So putting tasks in the superset will allow
them to run outside of <cputune>.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
When user configures vhost-user interface and forgets to also configure
any shared memory, the search for the root cause of non-operational
interface might take unpleasantly long time. Let's enhance user
experience by emitting a warning in the logs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1266982
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add qemuDomainHasVCpuPids to do the checking and replace in place checks
with it.
We no longer need checking whether the thread contains fake data
(vcpupids[0] == vm->pid) as in b07f3d821d
and 65686e5a81 this was removed.
Often when debugging bug reports one is given a copy of the file
from /var/log/libvirt/qemu/$NAME.log along with other supporting
files. In a number of cases I've been given sets of files which
were from different machines. Including the hostname in the QEMU
log file will help identify when the bug reporter is providing
bad information.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If VM A is shutdown a by qemu agent at appoximately the same time
an agent EOF of VM A happened, there's a chance that deadlock may occur:
qemuProcessHandleAgentEOF in main thread
A) priv->agent = NULL; //A happened before B
//deadlock when we get agent lock which's held by worker thread
qemuAgentClose(agent);
qemuDomainObjExitAgent called by qemuDomainShutdownFlags in worker thread
B) hasRefs = virObjectUnref(priv->agent); // priv->agent is NULL,
// return false
if (hasRefs)
virObjectUnlock(priv->agent); //agent lock will not be released here
In order to resolve, during EOF close the agent first, then set priv->agent
to NULL to fix the deadlock.
This essentially reverts commit id '1020a504'. It's also of note that commit
id '362d0477' notes a possible/rare deadlock similar to what was seen in
the monitor in commit id '25f582e3'. However, it seems interceding changes
including commit id 'd960d06f' should remove the deadlock issue.
With this change, if EOF is called:
Get VM lock
Check if !priv->agent || priv->beingDestroyed, then unlock VM
Call qemuAgentClose
Unlock VM
When qemuAgentClose is called
Get Agent lock
If Agent->fd open, close it
Unlock Agent
Unref Agent
qemuDomainObjEnterAgent
Enter with VM lock
Get Agent lock
Increase Agent refcnt
Unlock VM
After running agent command, calling qemuDomainObjExitAgent
Enter with Agent lock
Unref Agent
If not last reference, unlock Agent
Get VM lock
If we were in the middle of an EnterAgent, call Agent command, and
ExitAgent sequence and the EOF code is triggered, then the EOF code
can get the VM lock, make it's checks against !priv->agent ||
priv->beingDestroyed, and call qemuAgentClose. The CloseAgent
would wait to get agent lock. The other thread then will eventually
call ExitAgent, release the Agent lock and unref the Agent. Once
ExitAgent releases the Agent lock, AgentClose will get the Agent
Agent lock, close the fd, unlock the agent, and unref the agent.
The final unref would cause deletion of the agent.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Reviewed-by: Ren Guannan <renguannan@huawei.com>
Currently the QEMU monitor is given an FD to the logfile. This
won't work in the future with virtlogd, so it needs to use the
qemuDomainLogContextPtr instead, but it shouldn't directly
access that object either. So define a callback that the
monitor can use for reporting errors from the log file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When the qemuProcessAttach/Stop methods write a marker into
the log file, they can use qemuDomainLogContextWrite to
write a formatted message.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of writing directly to a log file descriptor, change
qemuLogOperation to use qemuDomainLogContextWrite().
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuDomainTaint APIs currently expect to be passed a log file
descriptor. Change them to instead use a qemuDomainLogContextPtr
to hide the implementation details.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the places which create/open log files to use the new
qemuDomainLogContextPtr object instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are two pretty similar functions qemuProcessReadLog and
qemuProcessReadChildErrors. Both read from the QEMU log file
and try to strip out libvirt messages. The latter then reports
an error, while the former lets the callers report an error.
Re-write qemuProcessReadLog so that it uses a single read
into a dynamically allocated buffer. Then introduce a new
qemuProcessReportLogError that calls qemuProcessReadLog
and reports an error.
Convert all callers to use qemuProcessReportLogError.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Once qemuProcessInit was called, qemuProcessLaunch will launch a new
QEMU process with stopped virtual CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is going to be split in three parts: qemuProcessInit,
qemuProcessLaunch, and qemuProcessFinish so that migration Prepare phase
can insert additional code in the process. qemuProcessStart will be a
small wrapper for all other callers.
qemuProcessInit prepares the domain up to the point when priv->qemuCaps
is initialized.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Now that new domains are started inside a QEMU_ASYNC_JOB_START job,
we need to pass it down to qemuProcessStartCPUs too.
This removes the warning:
qemuDomainObjEnterMonitorInternal:1750 : This thread seems to be the
async job owner; entering monitor without asking for a nested job is
dangerous
Introduced by commit 04c721f, before that this code path was only
executed with QEMU_ASYNC_JOB_NONE.
(This code is not executed on migration, because qemuMigrationPrepareAny
sets the VIR_QEMU_PROCESS_START_PAUSED flag.)
Remembering to call qemuMonitorSetDomainLog in the right paths before
calling qemuProcessStop is annoying and easy to forget. And I already
forgot to do so in commit v1.2.8-52-g0389060: logfd may be leaked if
QEMU process dies between Prepare and Finish migration phases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Traditionally, we pass incoming migration URI on QEMU command line,
which has some drawbacks. Depending on the URI QEMU may initialize its
migration state immediately without giving us a chance to set any
additional migration parameters (this applies mainly for fd: URIs). For
some URIs the monitor may be completely blocked from the beginning until
migration is finished, which means we may be stuck in qmp_capabilities
command without being able to send any QMP commands.
QEMU solved this by introducing "defer" parameter for -incoming command
line option. This will tell QEMU to prepare for an incoming migration
while the actual incoming URI is sent using migrate-incoming QMP
command. Before calling this command we can normally talk to the
monitor and even set any migration parameters which will be honored by
the incoming migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We only started an async job for incoming migration from another host.
When we were starting a domain from scratch or restoring from a saved
state (migration from file) we didn't set any async job. Let's introduce
a new QEMU_ASYNC_JOB_START for these cases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Incoming migration may require quite a few parameters (URI, fd, path) to
be considered while starting QEMU and we will soon add another one.
Let's group all of them in a single struct.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Make callers of qemuBuildCommandLine responsible for providing the URI
which should be passed as a parameter for -incoming.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As of QEMU 0.11.0 the 'info chardev' monitor command can be
used to report on allocated chardev paths, so we can drop
support for parsing QEMU stderr to locate the PTY paths.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
nodeset should be freed in both success and failure paths.
While tmppath is freed immediately after it's consumed, moving it from
error to cleanup label is a bit more consistent and robust.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Generally, we use "ret" variable for storing the value we are going to
return at the and of a function, but this is not the case in
qemuProcessStart. Let's rename "ret" as "rv".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart was passing char * migrateFrom as the third argument to
qemuPrepareNVRAM. We should explicitly convert the pointer to bool which
is what the function expects.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This calls the PCI-, USB- and SCSI-specific functions just
like qemuHostdev{Prepare,ReAttach}DomainDevices() already do,
and was the missing piece for the qemuHostdev API to nicely
mirror the virHostdev API.
Update qemuProcessReconnect() to use the new function.
Adopt the same names used for virHostdevUpdateActive*Devices() for
consistency's sake and to make it easier to jump between the two.
No functional changes.
Adopt the same names used for virHostdevReAttach*Devices() for
consistency's sake and to make it easier to jump between the two.
No functional changes.
https://bugzilla.redhat.com/show_bug.cgi?id=1249981
When qemuDomainPinIOThread was added in commit id 'fb562614', a check
for the IOThread capability was not needed since a check for iothreadpids
covered the condition where the support for IOThreads was not present.
The iothreadpids array was only created if qemuProcessDetectIOThreadPIDs
was able to query the monitor for IOThreads. It would only do that if
the QEMU_CAPS_OBJECT_IOTHREAD capability was set.
However, when iothreadids were added in commit id '8d4614a5' and the
check for iothreadpids was replaced by a search through the iothreadids[]
array for the matching iothread_id that left open the possibility that
an iothreadids[] array was defined, but the entries essentially pointed
to elements with only the 'iothread_id' defined leaving the 'thread_id'
value of 0 and eventually the cpumap entry of NULL.
This was because, the original IOThreads commit id '72edaae7' only
checked if IOThreads were defined and if the emulator had the IOThreads
capability, then IOThread objects were added at startup. The "capability
failure" check was only done when a disk was assigned to an IOThread in
qemuCheckIOThreads. This was because the initial implementation had no way
to dynamically add IOThreads, but it was possible to dynamically add a
disk to the domain. So the decision was if the domain supported it, then
add the IOThread objects. Then if a disk with an IOThread defined was
added, it could check the capability and fail to add if not there. This
just meant the 'iothreads' value was essentially ignored.
Eventually commit id 'a27ed6e7' allowed for the dynamic addition and
deletion of IOThread objects. So it was no longer necessary to generate
IOThread objects to dynamically attach a disk to. However, the startup
and disk check code was not modified to reflect this.
This patch will move the capability failure check to when IOThread
objects are being added to the command line. Thus a domain that has
IOThreads defined will not be started if the emulator doesn't support
the capability. This means when qemuCheckIOThreads is called to add
a disk, it's no longer necessary to check the capability. Instead the
code can use the IOThreadFind call to indicate that the IOThread
doesn't exist.
Finally because it could be possible to have a domain running with the
iothreadids[] defined prior to this change if libvirtd is restarted each
having mostly empty elements, qemuProcessDetectIOThreadPIDs will check
if there are niothreadids when the QEMU_CAPS_OBJECT_IOTHREAD capability
check fails and remove the elements and array if it exists.
With these changes in place, it turns out the cputune-numatune test
was failing because the right bit wasn't set in the test. So used the
opportunity to fix that and create a test that would expect to fail
with some sort of iothreads defined and used, but not having the
correct capability.
Although theoretically both should be the same value, the niothreadids
should be used in favor of iothreads when performing comparisons. This
leaves the iothreads as a purely numeric value to be saved in the config
file. The one exception to the rule is virDomainIOThreadIDDefArrayInit
where the iothreadids are being generated from the iothreads count since
iothreadids were added after initial iothreads support.
Coverity notices that net->ifname is potentially referenced after a
VIR_FREE(). Since the net->ifname will eventually be free'd during
virDomainDefFree when calling virDomainNetDefFree, let's just that
processing take care the free.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since we'd disallow migration of a guest that would have possibly
invalid config but still be able to work, relax the WWN check to be
performed only on new starts of the VM.
Coverity complains that return from virHookCall is not checked in
one place in qemuProcessStop. Since the comment notes that we cannot
stop the operation even it if fails, just added the ignore_value.
So far we have the following pattern occurring over and over
again:
if (!vm->persistent)
qemuDomainRemoveInactive(driver, vm);
It's safe to put the check into the function and save some LoC.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Qemu unfortunately doesn't update internal state right after migration
and so the actual balloon size as returned by 'query-balloon' are
invalid for a while after the CPUs are started after migration. If we'd
refresh our internal state at this point we would report invalid current
memory size until the next balloon event would arrive.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1242940
Every single call to qemuDomainEventQueue() uses the following pattern:
if (event)
qemuDomainEventQueue(driver, event);
Let's move the check for valid event to qemuDomainEventQueue and
simplify all callers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit id 'f1f68ca33' added code to remove the directory paths for
auto-generated sockets, but that code could be called before the
paths were created resulting in generating error messages from
virFileDeleteTree indicating that the file doesn't exist.
Rather than "enforce" all callers to make the non-NULL and existence
checks, modify the virFileDeleteTree API to silently ignore NULL on
input and non-existent directory trees.
Commit f1f68ca334 did not report an error if virFileMakePath()
returned -1. Well, who would've guessed function with name starting
with 'vir' sets an errno instead of reporting an error the libvirt way.
Anyway, let's fix it, so the output changes from:
$ virsh start arm
error: Failed to start domain arm
error: An error occurred, but the cause is unknown
to:
$ virsh start arm
error: Failed to start domain arm
error: Cannot create directory '/var/lib/libvirt/qemu/domain-arm': Not
a directory
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit f1f68ca334 overused mdir_name()
event though it was not needed in the latest version, hence labelling
directory one level up in the tree and not the one it should.
If anyone with SElinux managed to try run a domain with guest agent set
up, it's highly possible that they will need to run 'restorecon -F
/var/lib/libvirt/qemu/channel/target' to fix what was done.
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We are automatically generating some socket paths for domains, but all
those paths end up in a directory that's the same for multiple domains.
The problem is that multiple domains can each run with different
seclabels (users, selinux contexts, etc.). The idea here is to create a
per-domain directory labelled in a way that each domain can access its
own unix sockets.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virDomainObjListRemove() function unlocks a domain that it's given
due to legacy code. And because of that code, which should be
refactored, that last virObjectUnlock() cannot be just removed. So
instead, lock it right back for qemu for now. All calls to
qemuDomainRemoveInactive() are followed by code that unlocks the domain
again, plus the domain should be locked during qemuDomainObjEndJob(), so
the right place to lock it is right after virDomainObjListRemove().
The only place where this would cause a problem is the autodestroy
callback, so we need to get another reference there and uref+unlock it
afterwards. Luckily, returning NULL from that function doesn't mean an
error, and only means that it doesn't need to be unlocked anymore.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When stopping a domain on the destination host after a failed migration,
we need to avoid reseting security labels since the domain is still
running on the source host. While we were correctly doing so in some
cases, there were still some paths which did this wrong.
https://bugzilla.redhat.com/show_bug.cgi?id=1242904
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In addition to checking the current asynchronous job
qemuMigrationJobIsActive reports an error if the current job does not
match the one we asked for. Let's just check the job directly since we
are not interested in the error in qemuProcessHandleMonitorEOF.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In commit 641a145d73 I've added code that
resets the balloon memory value to full size prior to resuming the vCPUs
since the size certainly was not reduced at that point.
Since qemuProcessStart is used also in code paths with already booted
up guests (migration, save/restore) the assumption is not entirely true
since the guest might already been running before.
This patch adds a function that queries the monitor rather than using
the full size since a balloon event would not be reissued in case we are
recovering a saved migration state.
Additionally the new function is used also when reconnecting to a VM
after libvirtd restart since we might have missed a few balloon events
while libvirtd was not running.
After Jirka's migration patches libvirt is listening on migration
events from qemu instead of actively polling on the monitor. There is,
however, a little regression (introduced in 6d2edb6a42). The
problem is, the current status of migration job is updated in
qemuProcessHandleMigrationStatus if and only if migration job was
started. But eventually every asynchronous job may result in
migration. Therefore, since this job is not strictly a
migration job, internal state was not updated and later checks failed:
virsh # save fedora22 /tmp/fedora22_ble.save
error: Failed to save domain fedora22 to /tmp/fedora22_ble.save
error: operation failed: domain save job: is not active
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If QEMU fails during incoming migration, the domain disappears including
a possibly useful error message read from QEMU log file. Let's remember
the error in virQEMUDriver so that Finish can report more than just "no
such domain".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since we already support the MIGRATION event, we just need to make sure
the domain condition is signalled whenever a p2p connection drops or the
domain is paused due to IO error and we can avoid waking up every 50 ms
to check whether something happened.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We don't need to call query-migrate every 50ms when we get the current
migration state via MIGRATION event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Even if QEMU supports migration events it doesn't send them by default.
We have to enable them by calling migrate-set-capabilities. Let's enable
migration events everytime we can and clear QEMU_CAPS_MIGRATION_EVENT in
case migrate-set-capabilities does not support events.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Some guests lock the tray and QEMU eject command will simply fail to
eject the media. But the guest OS can handle this attempt to eject the
media and can unlock the tray and open it. In this case, we should try
again to actually eject the media.
If the first attempt fails to detect a tray_open we will fail with
error, from monitor. If we receive that event, we know, that the guest
properly reacted to the eject request, unlocked the tray and opened it.
In this case, we need to run the command again to actually eject the
media from the device. The reason to call it again is, that QEMU
doesn't wait for the guest to react and report an error, that the tray
is locked.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1147471
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_CAPS_SEAMLESS_MIGRATION capability says QEMU supports
SPICE_MIGRATE_COMPLETED event. Thus we can just drop all code which
polls query-spice and replace it with waiting for the event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When libvirtd is restarted during migration, we properly cancel the
ongoing migration (unless it managed to almost finished before the
restart). But if we were also migrating storage using NBD, we would
completely forget about the running disk mirrors.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
By switching block jobs to use domain conditions, we can drop some
pretty complicated code in NBD storage migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
After libvirt issues the balloon resize command, the current balloon
size needs to be changed to the maximum memory size since the vCPUs were
not started and thus the balloon driver could not return the memory.
Since GetXMLDesc and other APIs return the balloon size without updating
it in case they are not able to obtain the job and the memory balloon
does not support the asynchronous event the sizing might be incorrect.
Since the monitor code now supports ullongs when setting balloon size,
drop the legacy code with overflow checking.
Additionally the comment mentioning that the job is treated as a sync
job does not make sense any more since the monitor is entered
asynchronously.
Store the emulator pinning cpu mask as a pure virBitmap rather than the
virDomainPinDef since it stores only the bitmap and refactor
qemuDomainPinEmulator to do the same operations in a much saner way.
As a side effect virDomainEmulatorPinAdd and virDomainEmulatorPinDel can
be removed since they don't add any value.
In case when <vcpu ... cpuset=""> is not specified, the vcpupin array is
not guaranteed to be allocated to def->vcpus. This would cause a crash
for TCG since it does not report thread IDs for vCPUs.
Most virDomainDiskIndexByName callers do not care about the index; what
they really want is a disk def pointer.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When starting a domain, if a domain specifies security drivers we do not have
loaded, we fail. However we don't check for this during
reconnect, so any operation relying on security driver functionality would fail.
If someone e.g. starts a domain with selinux driver loaded, then they change
the security driver to 'none' in config, restart the daemon and call dump/save/..,
QEMU will return an error.
As we shouldn't kill the domain, we should at least log an error to let the
user know that domain reconnect wasn't completely clean.
https://bugzilla.redhat.com/show_bug.cgi?id=1183893
So far, we are not reporting if numatune was even defined. The
value of zero is blindly returned (which maps onto
VIR_DOMAIN_NUMATUNE_MEM_STRICT). Unfortunately, we are making
decisions based on this value. Instead, we should not only return
the correct value, but report to the caller if the value is valid
at all.
For better viewing of this patch use '-w'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Other threads may be blocked in qemuBlockJobSyncWait. Ensure that
they're woken up when the domain is stopped.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
If we received zero iothreads from the monitor, but were perhaps
expecting to receive something, then the code was skipping the check
to ensure what's in the monitor matches our expectations. So invert
the checks to check that what we get back matches expectations and
then check there are zero iothreads returned.
Rather than have a separate routine to parse the alias of an iothread
returned from qemu in order to get the iothread_id value, parse the alias
when returning and just return the iothread_id in qemuMonitorIOThreadInfoPtr
This set of patches removes the function, changes the "char *name" to
"unsigned int" and handles all the fallout.
Remove the iothreadspin array from cputune and replace with a cpumask
to be stored in the iothreadids list.
Adjust the test output because our printing goes in order of the iothreadids
list now.
Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.
Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.
Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id
Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.
The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).
If a user hot-attaches the guest agent channel libvirt would ignore it
until the restart of libvirtd or shutdown/destroy and start of the VM
itself.
This patch adds code that opens or closes the guest agent connection
according to the state of the guest agent channel according to
connect/disconnect events.
To allow opening the channel from the event handler qemuConnectAgent
needed to be exported.
When the guest agent channel gets hotplugged to a VM, libvirt would
still report that "QEMU guest agent is not configured" rather than
stating that the connection was not established yet.
Currently the code won't be able to connect to the agent after hotplug
but that will change in a later patch.
As the qemuFindAgentConfig() helper is quite helpful in this case move
it to a more usable place and export it.
This is basically turning qemuDomObjEndAPI into a more general
function. Other drivers which gets a reference to domain objects may
benefit from this function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1198645
Once upon a time, there was a little domain. And the domain was pinned
onto a NUMA node and hasn't fully allocated its memory:
<memory unit='KiB'>2355200</memory>
<currentMemory unit='KiB'>1048576</currentMemory>
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
Oh little me, said the domain, what will I do with so little memory.
If I only had a few megabytes more. But the old admin noticed the
whimpering, barely audible to untrained human ear. And good admin he
was, he gave the domain yet more memory. But the old NUMA topology
witch forbade to allocate more memory on the node zero. So he
decided to allocate it on a different node:
virsh # numatune little_domain --nodeset 0-1
virsh # setmem little_domain 2355200
The little domain was happy. For a while. Until bad, sharp teeth
shaped creature came. Every process in the system was afraid of him.
The OOM Killer they called him. Oh no, he's after the little domain.
There's no escape.
Do you kids know why? Because when the little domain was born, her
father, Libvirt, called numa_set_membind(). So even if the admin
allowed her to allocate memory from other nodes in the cgroups, the
membind() forbid it.
So what's the lesson? Libvirt should rely on cgroups, whenever
possible and use numa_set_membind() as the last ditch effort.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The destination libvirt daemon in a migration may segfault if the client
disconnects immediately after the migration has begun:
# virsh -c qemu+tls://remote/system list --all
Id Name State
----------------------------------------------------
...
# timeout --signal KILL 1 \
virsh migrate example qemu+tls://remote/system \
--verbose --compressed --live --auto-converge \
--abort-on-error --unsafe --persistent \
--undefinesource --copy-storage-all --xml example.xml
Killed
# virsh -c qemu+tls://remote/system list --all
error: failed to connect to the hypervisor
error: unable to connect to server at 'remote:16514': Connection refused
The crash is in:
1531 void
1532 qemuDomainObjEndJob(virQEMUDriverPtr driver, virDomainObjPtr obj)
1533 {
1534 qemuDomainObjPrivatePtr priv = obj->privateData;
1535 qemuDomainJob job = priv->job.active;
1536
1537 priv->jobs_queued--;
Backtrace:
#0 at qemuDomainObjEndJob at qemu/qemu_domain.c:1537
#1 in qemuDomainRemoveInactive at qemu/qemu_domain.c:2497
#2 in qemuProcessAutoDestroy at qemu/qemu_process.c:5646
#3 in virCloseCallbacksRun at util/virclosecallbacks.c:350
#4 in qemuConnectClose at qemu/qemu_driver.c:1154
...
qemuDomainRemoveInactive calls virDomainObjListRemove, which in this
case is holding the last remaining reference to the domain.
qemuDomainRemoveInactive then calls qemuDomainObjEndJob, but the domain
object has been freed and poisoned by then.
This patch bumps the domain's refcount until qemuDomainRemoveInactive
has completed. We also ensure qemuProcessAutoDestroy does not return the
domain to virCloseCallbacksRun to be unlocked in this case. There is
similar logic in bhyveProcessAutoDestroy and lxcProcessAutoDestroy
(which call virDomainObjListRemove directly).
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.
Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).
Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606https://bugzilla.redhat.com/show_bug.cgi?id=1076708
Test changes:
* virtio-auto.args
Filling out the port when just the controller is specified.
switched from using
maxport + 1
to:
first free port on the controller
* virtio-autoassign.args
Filling out the address when no <address> is specified.
Started using all the controllers instead of 0, also discards
the bus value.
* xml -> xml output of virtio-auto
The port assignment is no longer done as a part of XML parsing,
so the unspecified values stay 0.
Two places would call to qemuPrepareCpumap() with priv->autoNodeset to
convert it to a cpuset. Remove the function and use the prepared cpuset
automatically.
When the synchronous pivot option is selected, libvirt would not update
the backing chain until the job was exitted. Some applications then
received invalid data as their job serialized first.
This patch removes polling to wait for the ABORT/PIVOT job completion
and replaces it with a condition. If a synchronous operation is
requested the update of the XML is executed in the job of the caller of
the synchronous request. Otherwise the monitor event callback uses a
separate worker to update the backing chain with a new job.
This is a regression since 1a92c71910
When the ABORT job is finished synchronously you get the following call
stack:
#0 qemuBlockJobEventProcess
#1 qemuDomainBlockJobImpl
#2 qemuDomainBlockJobAbort
#3 virDomainBlockJobAbort
While previously or while using the _ASYNC flag you'd get:
#0 qemuBlockJobEventProcess
#1 processBlockJobEvent
#2 qemuProcessEventHandler
#3 virThreadPoolWorker
When using 'dimm' memory devices with qemu, some of the information
like the slot number and base address need to be reloaded from qemu
after process start so that it reflects the actual state. The state then
allows to use memory devices across migrations.
virnetdevopenvswitch.h declares a few functions that can be called to
add ports to and remove them from OVS bridges, and retrieve the
migration data for a port. It does not contain any data definitions
that are used by domain_conf.h. But for some reason, domain_conf.h
virnetdevopenvswitch.h should be directly #including it. This adds a
few lines to the project, but saves all the files that don't need it
from the extra computing, and makes the dependencies more clear cut.
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Use the utilities introduced in the previous patches so the qemu
driver is able to create tap devices that are bound (and unbound
on domain destroyal) to Midonet virtual ports.
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
We're parsing memballoon status period as unsigned int, but when we're
trying to set it, both we and qemu use signed int. That means large
values will get wrapped around to negative one resulting in error.
Basically the same problem as commit e3a7b874 was dealing with when
updating live domain.
QEMU changed the accepted value to int64 in commit 1f9296b5, but even
values as INT_MAX don't make sense since the value passed means seconds.
Hence adding capability flag for this change isn't worth it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140958
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As pointed out by jtomko in his review of the IOThreads pinning code:
http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html
there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...
This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
Surprisingly we did not grab a VM job when a block job finished and we'd
happily rewrite the backing chain data. This made it possible to crash
libvirt when queueing two backing chains tightly and other badness.
To fix it, add yet another handler to the helper thread that handles
monitor events that require a job.
https://bugzilla.redhat.com/show_bug.cgi?id=1197600
So, libvirt uses pid file to track pid of started qemus. Whenever
a domain is started, its pid is put into corresponding pid file.
The pid file path is generated based on domain name and stored
into domain object internals. However, it's not stored in the
status XML and therefore lost on daemon restarts. Hence, later,
when domain is being shut down, the daemon does not know which
pid file to unlink, and the correct pid file is left behind. To
avoid this, lets generate the pid file path again in
qemuProcessReconnect().
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of checking defaultMode for every channel that has no mode
configured, test it only once outside of channel loop. This fixes a bug
that in case all possible channels are fore example set to insecure, but
defaultMode is set to secure, we wouldn't auto-generate TLS port. This
results in failure while starting a guest.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1143832
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We have two different places that needs to be updated while touching
code for allocation spice ports. Add a bool option to
'qemuProcessSPICEAllocatePorts' function to switch between true and fake
allocation so we can use this function also in qemu_driver to generate
native domain definition.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since adding the support for scheduler policy settings in commit
8680ea97, there are two enums with the same information. That was
caused by rewriting the patch since first draft.
Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Upon BLOCK_JOB_COMPLETED event delivery, we check if the job has
completed (in qemuMonitorJSONHandleBlockJobImpl()). For better image,
the event looks something like this:
"timestamp": {"seconds": 1423582694, "microseconds": 372666}, "event":
"BLOCK_JOB_COMPLETED", "data": {"device": "drive-virtio-disk0", "len":
8412790784, "offset": 409993216, "speed": 8796093022207, "type":
"mirror", "error": "No space left on device"}}
If "len" does not equal "offset" it's considered an error, and we can
clearly see "error" field filled in. However, later in the event
processing this case was handled no differently to case of job being
aborted via separate API. It's time that we start differentiate these
two because of the future work.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, upon BLOCK_JOB_* event, disk->mirrorState is not updated
each time. The callback code handling the events checks if a blockjob
was started via our public APIs prior to setting the mirrorState.
However, some block jobs may be started internally (e.g. during
storage migration), in which case we don't bother with setting
disk->mirror (there's nothing we can set it to anyway), or other
fields. But it will come handy if we update the mirrorState in these
cases too. The event wasn't delivered just for fun - we've started the
job after all.
So, in this commit, the mirrorState is set to whatever job status
we've obtained. Of course, there are some actions on some statuses
that we want to perform. But instead of if {} else if {} else {} ...
enumeration, let's move to switch().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We do have a check for valid per-domain security model, however we still
do permit an invalid security model for a domain's device (those which
are specified with <source> element).
This patch introduces a new function virSecurityManagerCheckAllLabel
which compares user specified security model against currently
registered security drivers. That being said, it also permits 'none'
being specified as a device security model.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165485
Signed-off-by: Ján Tomko <jtomko@redhat.com>
If a previous commit I fixed the incorrect handling of vcpu pids
for TCG mode QEMU:
commit b07f3d821d
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Dec 18 16:34:39 2014 +0000
Don't setup fake CPU pids for old QEMU
The code assumes that def->vcpus == nvcpupids, so when we setup
fake CPU pids for old QEMU with nvcpupids == 1, we cause the
later code to read off the end of the array. This has fun results
like sche_setaffinity(0, ...) which changes libvirtd's own CPU
affinity, or even better sched_setaffinity($RANDOM, ...) which
changes the affinity of a random OS process.
The intent was that this would merely disable the ability to set
per-vCPU affinity. It should still have been possible to set VM
level host CPU affinity.
Unfortunately, when you set <vcpu cpuset='0-1'>4</vcpu>, the XML
parser will internally take this & initialize an entry in the
def->cputune.vcpupin array for every VCPU. IOW this is implicitly
being treated as
<cputune>
<vcpupin cpuset='0-1' vcpu='0'/>
<vcpupin cpuset='0-1' vcpu='1'/>
<vcpupin cpuset='0-1' vcpu='2'/>
<vcpupin cpuset='0-1' vcpu='3'/>
</cputune>
Even more fun, the faked cputune elements are hidden from view when
querying the live XML, because their cpuset mask is the same as the
VM default cpumask.
The upshot was that it was impossible to set VM level CPU affinity.
To fix this we must update qemuProcessSetVcpuAffinities so that it
only reports a fatal error if the per-VCPU cpu mask is different
from the VM level cpu mask.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It is often helpful to know which version of libvirt and QEMU
was present when a guest was first launched. Ensure this info
is written into the QEMU log file for each guest.
Depending on the context, either error out if the domain
has disappeared in the meantime, or just ignore the value
to allow marking the function as ATTRIBUTE_RETURN_CHECK.
https://bugzilla.redhat.com/show_bug.cgi?id=1161024
In the device type-specific functions, exit early
if the domain has disappeared, because the cleanup
should have been done by qemuProcessStop.
Check the return value in processDeviceDeletedEvent
and qemuProcessUpdateDevices.
Skip audit and removing the device from live def because
it has already been cleaned up.
Make local copy of the disk alias in qemuProcessInitPasswords,
instead of referencing the one in domain definition, which
might get freed if the domain crashes while we're in monitor.
Also copy the memballoon period value.
QEMU internally updates the size of video memory if the domain XML had
provided too low memory size or there are some dependencies for a QXL
devices 'vgamem' and 'ram' size. We need to know about the changes and
store them into the status XML to not break migration or managedsave
through different libvirt versions.
The values would be loaded only if the "vgamem_mb" property exists for
the device. The presence of the "vgamem_mb" also tells that the
"ram_size" and "vram_size" exists for QXL devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There is one problem that causes various errors in the daemon. When
domain is waiting for a job, it is unlocked while waiting on the
condition. However, if that domain is for example transient and being
removed in another API (e.g. cancelling incoming migration), it get's
unref'd. If the first call, that was waiting, fails to get the job, it
unref's the domain object, and because it was the last reference, it
causes clearing of the whole domain object. However, when finishing the
call, the domain must be unlocked, but there is no way for the API to
know whether it was cleaned or not (unless there is some ugly temporary
variable, but let's scratch that).
The root cause is that our APIs don't ref the objects they are using and
all use the implicit reference that the object has when it is in the
domain list. That reference can be removed when the API is waiting for
a job. And because each domain doesn't do its ref'ing, it results in
the ugly checking of the return value of virObjectUnref() that we have
everywhere.
This patch changes qemuDomObjFromDomain() to ref the domain (using
virDomainObjListFindByUUIDRef()) and adds qemuDomObjEndAPI() which
should be the only function in which the return value of
virObjectUnref() is checked. This makes all reference counting
deterministic and makes the code a bit clearer.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Although QMP returns info about vCPU threads in TCG mode, the
data it returns is mostly lies. Only the first vCPU has a valid
thread_id returned. The thread_id given for the other vCPUs is
in fact the main emulator thread. All vCPUs actually run under
the same thread in TCG mode.
Our vCPU pinning code is not at all able to cope with this
so if you try to set CPU affinity per-vCPU you end up with
wierd errors
error: Failed to start domain instance-00000007
error: cannot set CPU affinity on process 24365: Invalid argument
Since few people will care about the performance of TCG with
strict CPU pinning, lets just disable that for now, so we get
a clear error message
error: Failed to start domain instance-00000007
error: Requested operation is not valid: cpu affinity is not supported
The code assumes that def->vcpus == nvcpupids, so when we setup
fake CPU pids for old QEMU with nvcpupids == 1, we cause the
later code to read off the end of the array. This has fun results
like sche_setaffinity(0, ...) which changes libvirtd's own CPU
affinity, or even better sched_setaffinity($RANDOM, ...) which
changes the affinity of a random OS process.
We now have a qemuInterfaceStartDevices() which does the final
activation needed for the host-side tap/macvtap devices that are used
for qemu network connections. It will soon make sense to have the
converse qemuInterfaceStopDevices() which will undo whatever was done
during qemuInterfaceStartDevices().
A function to "stop" a single device has also been added, and is
called from the appropriate place in qemuDomainDetachNetDevice(),
although this is currently unnecessary - the device is going to
immediately be deleted anyway, so any extra "deactivation" will be for
naught. The call is included for completeness, though, in anticipation
that in the future there may be some required action that *isn't*
nullified by deleting the device.
This patch is a part of a more complete fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=1081461
The patch that added qemuInterfaceStartDevices() (upstream commit
82977058f5) had an extra conditional to
prevent calling it if the reason for starting the CPUs was
VIR_DOMAIN_RUNNING_UNPAUSED or VIR_DOMAIN_RUNNING_SAVE_CANCELED. This
was put in by the author as the result of a reviewer asking if it was
necessary to ifup the interfaces in *all* occasions (because these
were the two cases where the CPU would have already been started (and
stopped) once, so the interface would already be ifup'ed).
It turns out that, as long as there is no corresponding
qemuInterfaceStopDevices() to ifdown the interfaces anytime the CPUs
are stopped, neglecting to ifup when reason is RUNNING_UNPAUSED or
RUNNING_SAVE_CANCELED doesn't cause any problems (because it just
happens that the interface will have already been ifup'ed by a prior
call when the CPU was previously started for some other reason).
However, it also doesn't *help*, and there will soon be a
qemuInterfaceStopDevices() function which *will* ifdown these
interfaces when the guest CPUs are stopped, and once that is done, the
interfaces will be left down in some cases when they should be up (for
example, if a domain is paused and then unpaused).
So, this patch is removing the condition in favor of always calling
qemuInterfaeStartDevices() when the guest CPUs are started.
This patch (and the aforementioned patch) resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=1081461
Currently, MAC registration occurs during device creation, which is
early enough that, during live migration, you end up with duplicate
MAC addresses on still-running source and target devices, even though
the target device isn't actually being used yet.
This patch proposes to defer MAC registration until right before
the guest can actually use the device -- In other words, right
before starting guest CPUs.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
Move entering the job into the thread to simplify the program flow. Also
as the code holds a separate reference to the domain object some
conditions can be simplified.
After this patch qemuDomainObjTransferJob is no longer needed so this
patch removes it.
There are some small issue in qemuProcessAttach:
1.Fix virSecurityManagerGetProcessLabel always get pid = 0,
move 'vm->pid = pid' before call virSecurityManagerGetProcessLabel.
2.Use virSecurityManagerGenLabel to get image label.
3.Fix always set selinux label for other security driver label.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
When a block{commit,copy} job was aborted on a domain, block job handler
did not process it correctly, leaving a phantom job in the background.
Any further calls to any blockjob causes "block <jobtype> still active"
error. This patch fixes the blockjob handler so that it checks not only
for VIR_DOMAIN_BLOCK_JOB_FAILED status, but VIR_DOMAIN_BLOCK_JOB_CANCELED
status as well, followed by our existing cleanup routine.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135169
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160084
As of b6d4dad11b (1.2.5) we are trying to keep the status of FSFreeze
in the guest. Even though I've tried to fixed couple of corner cases
(6ea54769ba), it occurred to me just recently, that the approach is
broken by design. Firstly, there are many other ways to talk to
qemu-ga (even through libvirt) that filesystems can be thawed (e.g.
qemu-agent-command) without libvirt noticing. Moreover, there are
plenty of ways to thaw filesystems without even qemu-ga noticing (yes,
qemu-ga keeps internal track of FSFreeze status). So, instead of
keeping the track ourselves, or asking qemu-ga for stale state, it's
the best to let qemu-ga deal with that (and possibly let guest kernel
propagate an error).
Moreover, there's one bug with the following approach, if fsfreeze
command failed, we've executed fsthaw subsequently. So issuing
domfsfreeze in virsh gave the following result:
virsh # domfsfreeze gentoo
Froze 1 filesystem(s)
virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance
virsh # domfsfreeze gentoo
Froze 1 filesystem(s)
virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Improve the monitor function to also retrieve the guest state of
character device (if provided) so that we can refresh the state of
virtio-serial channels and perhaps react to changes in the state in
future patches.
This patch changes the returned data from qemuMonitorGetChardevInfo to
return a structure containing the pty path and the state for all the
character devices.
The change to the testsuite makes sure that the data is parsed
correctly.
New qemu added a new event that is emitted when a virtio serial channel
is opened in the guest OS. This allows us to update the state of the
port in the output-only XML element.
This patch implements the monitor callbacks and necessary handlers to
update the state in the definition.
