Commit 19a148b dropped the cache from QEMU's private domain object.
Assume the callers do not have the cache by default and use
a longer name for the internal ones that do.
This makes the shorter 'virDomainVirtioSerialAddrAutoAssign'
name availabe for a function that will not require the cache.
When user tries to resume already running domain (Qemu or LXC)
VIR_ERR_OPERATION_INVALID error should be raised with message that
domain is already running.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1009008
Support for virtio disks was added in commit id 'fceeeda', but not for
SCSI drives. Add the secret for the server when hotplugging a SCSI drive.
No need to make any adjustments for unplug since that's handled during
the qemuDomainDetachDiskDevice call to qemuDomainRemoveDiskDevice in
the qemuDomainDetachDeviceDiskLive switch.
Added a test to/for the command line processing to show the command line
options when adding a SCSI drive for the guest.
https://bugzilla.redhat.com/show_bug.cgi?id=1300776
Complete the implementation of support for TLS encryption on
chardev TCP transports by adding the hotplug ability of a secret
to generate the passwordid for the TLS object for chrdev, RNG,
and redirdev.
Fix up the order of object removal on failure to be the inverse
of the attempted attach (for redirdev, chr, rng) - for each the
tls object was being removed before the chardev backend.
Likewise, add the ability to hot unplug that secret object as well
and be sure the order of unplug matches that inverse order of plug.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.
Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.
Add test for at least a serial chardev as an example.
Need to remove the drive first, then the secobj and/or encobj if they exist.
This is because the drive has a dependency on secobj (or the secret for
the networked storage server) and/or the encobj (or the secret for the
LUKS encrypted volume). Deleting either object first leaves an drive
without it's respective objects.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add in the block I/O throttling length/duration parameter to the command
line if supported. If not supported, fail command creation.
Add the xml2argvtest for testing.
Add support for a duration/length for the bps/iops and friends.
Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options
total_bytes_sec_max_length
write_bytes_sec_max_length
read_bytes_sec_max_length
total_iops_sec_max_length
write_iops_sec_max_length
read_iops_sec_max_length
Create a helper to set the bytes/iops iotune default values based on
the current qemu setting for both the live and persistent definitions.
NB: This also fixes an unreported bug where the persistent values for
*_max and size_iops_sec would be set back to 0 if unrelated persistent
values were set.
This patch will also adjust the qemuMonitorJSONSetBlockIoThrottle error
procession so that rather than returning/displaying:
"error: internal error: Unexpected error"
Fetch the actual error message from qemu and display that
Create a macros to hide all the comparisons for each of the fields.
Add a 'continue;' for a compiler hint that we only need to find one
this should be similar enough to the if - elseif - elseif logic.
Commit id '2c32237' added the TLS object removal to the DetachChrDevice
all when it should have been added to the RemoveChrDevice since that's
the norm for similar processing (e.g. disk)
Signed-off-by: John Ferlan <jferlan@redhat.com>
After succesfully reading an outdated caps cache from disk,
calling virQEMUCapsReset did not properly clear out the calculated
host CPU model. This lead to a memory leak when the host CPU model
pointer was overwritten later in virQEMUCapsNewForBinaryInternal.
Introduced by commit 68c70118.
Extended qemuDomainGetStatsVcpu to include the per vcpu halted
indicator if reported by QEMU. The key for new boolean value
has the format "vcpu.<n>.halted".
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Adding a field to the domain's private vcpu object to hold the halted
state information.
Adding two functions in support of the halted state:
- qemuDomainGetVcpuHalted: retrieve the halted state from a
private vcpu object
- qemuDomainRefreshVcpuHalted: obtain the per-vcpu halted states
via qemu monitor and store the results in the private vcpu objects
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Hao QingFeng <haoqf@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Extended the qemuMonitorCPUInfo with a halted flag. Extract the halted
flag for both text and JSON monitor.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
An upcoming commit will remove the "flag" argument from all the calls
to reserve the next available address|slot, but I don't want to change
the arguments in the hypervisor-agnostic
virDomainPCIAddressReserveNext*() functions, so this patch places a
simple qemu-specific wrapper around those functions - the new
functions don't take a flags arg, but grab it from the device's
info->pciConnectFlags.
Since TLS was introduced hostwide for libvirt 2.3.0 and a domain
configurable haveTLS was implemented for libvirt 2.4.0, we have to
modify the migratable XML for specific case where the 'tls' attribute
is based on setting from qemu.conf.
The "tlsFromConfig" is libvirt internal attribute and is stored only in
status XML to ensure that when libvirtd is restarted this internal flag
is not lost by the restart.
That flag is used to decide whether we should put *tls* attribute to
migratable XML or not.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently the union has only one member so remove that union. If there
is a need to add a new type of source for new bus in the future this
will force the author to add a union and properly check bus type before
any access to union member.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit id '2c322378' missed the nuance that the rng backend could be
using a TCP chardev and if TLS is enabled on the host, thus will need
to have the TLS object added.
Commit id '2c322378' missed the nuance that the redirdev backend could
be using a TCP chardev and if TLS is enabled on the host, thus will need
to have the TLS object added.
Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainRedirdevDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainSmartcardDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
from virDomainDefPtr to virDomainObjPtr so that the function has
access to the other parts of the virDomainObjPtr. Take advantage of
this by removing the "priv" arg and retrieving it from the
virDomainObjPtr instead.
No functional change.
More occurences of repeatedly dereferencing the same pointer stored in
an array are replaced with the definition of a temporary pointer that
is then used directly. No functional change.
Commit id '5f2a132786' should have placed the data in the host source
def structure since that's also used by smartcard, redirdev, and rng in
order to provide a backend tcp channel. The data in the private structure
will be necessary in order to provide the secret properly.
This also renames the previous names from "Chardev" to "ChrSource" for
the private data structures and API's
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When hotplugging networks with ancient QEMUs not supporting
QEMU_CAPS_NETDEV, we use space instead of a comma as the separator
between the network type and other options.
Except for "user", all the network types pass other options
and use up the first separator by the time we get to the section
that adds the alias (or vlan for QEMUs without CAPS_NETDEV).
Since the alias/vlan is mandatory, convert all preceding code to add
the separator at the end, removing the need to rewrite type_sep for
all types but NET_TYPE_USER.
Modeled after the qemuDomainHostdevPrivatePtr (commit id '27726d8c'),
create a privateData pointer in the _virDomainChardevDef to allow storage
of private data for a hypervisor in order to at least temporarily store
secret data for usage during qemuBuildCommandLine.
NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the secret data, there's no need to add code
code to handle this new structure there.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new qemu.conf variables to store the UUID for the secret that could
be used to present credentials to access the TLS chardev. Since this will
be a server level and it's possible to use some sort of default, introduce
both the default and chardev logic at the same time making the setting of
the chardev check for it's own value, then if not present checking whether
the default value had been set.
Signed-off-by: John Ferlan <jferlan@redhat.com>
There was inconsistency between alias used to create tls-creds-x509
object and alias used to link that object to chardev while hotpluging.
Hotplug ends with this error:
error: Failed to detach device from channel-tcp.xml
error: internal error: unable to execute QEMU command 'chardev-add':
No TLS credentials with id 'objcharchannel3_tls0'
In XML we have for example alias "serial0", but on qemu command line we
generate "charserial0".
The issue was that code, that creates QMP command to hotplug chardev
devices uses only the second alias "charserial0" and that alias is also
used to link the tls-creds-x509 object.
This patch unifies the aliases for tls-creds-x509 to be always generated
from "charserial0".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Instead of typing the prefix every time we want to append parameters
to qemu command line use a variable that contains prefixed alias.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to make sure that the chardev is TCP. Without this check we
may access different part of union and corrupt pointers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1366108
There are couple of things that needs to be done in order to
allow vhost-user hotplug. Firstly, vhost-user requires a chardev
which is connected to vhost-user bridge and through which qemu
communicates with the bridge (no acutal guest traffic is sent
through there, just some metadata). In order to generate proper
chardev alias, we must assign device alias way sooner.
Then, because we are plugging the chardev first, we need to do
the proper undo if something fails - that is remove netdev too.
We don't want anything to be left over in case attach fails at
some point.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1366505
So far, this function lacked support for
VIR_DOMAIN_NET_TYPE_VHOSTUSER leaving callers to hack around the
problem by constructing the command line on their own. This is
not ideal as it blocks hot plug support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, what we do for vhost-user network is generate the
following part of command line:
-netdev type=vhost-user,id=hostnet0,chardev=charnet0
There's no need for 'type=' it is the default. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no need to reinvent the wheel here. We already have a
function to format virDomainChrSourceDefPtr. It's called
qemuBuildChrChardevStr(). Use that instead of some dummy
virBufferAsprintf().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This alone makes not much sense. But the aim is to reuse this
function in qemuBuildVhostuserCommandLine() where 'nowait' is not
supported for vhost-user devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We tend to prevent using 'default' in switches. And it is for a
good reason - control may end up in paths we wouldn't want for
new values. In this specific case, if qemuBuildHostNetStr is
called over VIR_DOMAIN_NET_TYPE_VHOSTUSER it would produce
meaningless output. Fortunately, there no such call yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of blindly claim support for hot-plugging of every
interface type out there we should copy approach we have for
device types: white listing supported types and explicitly error
out on unsupported ones.
For instance, trying to hotplug vhostuser interface results in
nothing usable from guest currently. vhostuser typed interfaces
require additional work on our side.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking at its
beginning and then have one big switch for all the interface
types it supports.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemuBuildSmbiosBiosStr and qemuBuildSmbiosSystemStr return NULL if
there's nothing to format on the commandline. Reporting errors from
buffer creation doesn't make sense since it would be ignored.
This initially started as a fix of some debug printing in
virCgroupDetect. However it turned out that other places suffer
from the similar problem. While dealing with pids, esp. in cases
where we cannot use pid_t for ABI stability reasons, we often
chose an unsigned integer type. This makes no sense as pid_t is
signed.
Also, new syntax-check rule is introduced so we won't repeat this
mistake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are two video devices with models without VGA compatibility mode.
They are primary used as secondary video devices, but in some cases it
is required to use them also as primary video devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This improves commit 706b5b6277 in a way that we check qemu capabilities
instead of what architecture we are running on to detect whether we can
use *virtio-vga* model or not. This is not a case only for arm/aarch64.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit 21373feb added support for primary virtio-vga device but it was
checking for virtio-gpu. Let's check for existence of virtio-vga if we
want to use it.
Virtio video device is currently represented by three different models
*virtio-gpu-device*, *virtio-gpu-pci* and *virtio-vga*. The first two
models are tied together and if virtio video devices is compiled in they
both exist. However, the *virtio-vga* model doesn't have to exist on
some architectures even if the first two models exist. So we cannot
group all three together.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Before this patch we've checked qemu capabilities for video devices
only while constructing qemu command line using "-device" option.
Since we support qemu only if "-device" option is present we can use
the same capabilities to check also video devices while using "-vga"
option to construct qemu command line.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All definition validation that doesn't depend on qemu capabilities
and was allowed previously as valid definition should be placed into
qemuDomainDefValidate.
The check whether video type is supported or not was based on an enum
that translates type into model. Use switch to ensure that if new
video type is added, it will be properly handled.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We generally uses QEMU_CAPS_DEVICE_$NAME to probe for existence of some
device and QEMU_CAPS_$NAME_$PROP to probe for existence of some property
of that device.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If QEMU in question supports QMP, this capability is set if
QEMU_CAPS_DEVICE_QXL was set based on existence of "-device qxl". If
libvirt needs to parse *help*, because there is no QMP support, it
checks for existence of "-vga qxl", but it also parses output of
"-device ?" and sets QEMU_CAPS_DEVICE_QXL too.
Now that libvirt supports only QEMU that has "-device" implemented it's
safe to drop this capability and stop using it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch simplifies QEMU capabilities for QXL video device. QEMU
exposes this device as *qxl-vga* and *qxl* and they are both the same
device with the same set of parameters, the only difference is that
*qxl-vga* includes VGA compatibility.
Based on QEMU code they are tied together so it's safe to check only for
presence of only one of them.
This patch also removes an invalid test case "video-qxl-sec-nodevice"
where there is only *qxl-vga* device and *qxl* device is not present.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Qemu supports *xen* video device only with XEN and this code was part
of xenner code. We dropped support for xenner in commit de9be0a.
Before this patch if you used 'xen' video type you ended up with
domain without any video device at all. Now we don't allow to start
such domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It was never safe anyway and as such shouldn't have been enabled in the
first place. Future patches will allow hot-(un)pluging of some ivshmem
devices as a workaround.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently Libvirt allows attempts to migrate read only disks. Qemu
cannot handle this as read only disks cannot be written to on the
destination system. The end result is a cryptic error message and a
failed migration.
This patch causes migration to fail earlier and provides a meaningful
error message stating that migrating read only disks is not supported.
Signed-off-by: Corey S. McQuay <csmcquay@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
The intel-iommu device has existed since QEMU 2.2.0, but
it was only possible to create it with -device since
QEMU 2.7.0, thanks to:
commit 621d983a1f9051f4cfc3f402569b46b77d8449fc
Author: Marcel Apfelbaum <marcel@redhat.com>
Date: Mon Jun 27 18:38:34 2016 +0300
hw/iommu: enable iommu with -device
Use the standard '-device intel-iommu' to create the IOMMU device.
The legacy '-machine,iommu=on' can still be used.
The libvirt capability check & command line formatting code
is thus broken for all QEMU versions 2.2.0 -> 2.6.0 inclusive.
This fixes it to use iommu=on instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since introduction of chardev hotplug the code was wrong for the UDP
case and basically created a TCP socket instead. Use proper objects and
type for UDP.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1377602
We're about to add more options, let's avoid having multiple if-then-else
which each try to set up the qemuMonitorJSONMakeCommand call with all the
parameters it knows about.
Instead, use the fact that when a NULL is found in the argument list that
processing of the remaining arguments stops and just have call.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We're about to add 6 new options and it appears (from testing) one cannot
utilize both the shorthand (alias) and (much) longer names for the arguments.
So modify the command builder to use the longer name and of course alter the
test output .args to have the similarly innocuous long name.
Also utilize a macro to build that name makes it so much more visually
appealing and saves a few characters or potential cut-n-paste issues.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reduce some cut-n-paste code by creating common helper. Make use of the
recently added virJSONValueObjectStealArray to grab the devices list as
part of the common code (we we can Free the reply) and return devices for
each of the callers to continue to parse.
NB: This also adds error checking to qemuMonitorJSONDiskNameLookup
Signed-off-by: John Ferlan <jferlan@redhat.com>
If attaching to a qemu process fails after opening the monitor socket
libvirt does not clean up the monitor. As the monitor also holds a
reference to the domain object the qemu attach API basically leaks it.
QEMU also does not interact on a second monitor connection and thus a
further attempt to attach to it would lock up.
Prevent libvirt from leaking the monitor by explicitly closing it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378401
Attaching to a existing qemu process allows to get us into a situation
when qemu is new enough to have JSON monitor and new vCPU hotplug but
the json monitor is not used. The vCPU detection code would require it
though. This broke attaching to qemu processes.
Make the condition less strict and just skip the vCPU hotplug detection
if JSON monitor is not available.
Resolves one of the symptoms in:
https://bugzilla.redhat.com/show_bug.cgi?id=1378401
This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.
This reverts commit 581b7756af.
Certain operations may make the vcpu order information invalid. Since
the order is primarily used to ensure migration compatibility and has
basically no other user benefits, clear the order prior to certain
operations and document that it may be cleared.
All the operations that would clear the order can still be properly
executed by defining a new domain configuration rather than using the
helper APIs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370357
virDomainDefSetVcpus was not designed to handle coldplug of vcpus now
that we can set state of vcpus individually.
Introduce qemuDomainSetVcpusConfig that properly handles state changes
of vcpus when coldplugging so that invalid configurations are not
created.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375939
The current code that validates duplicate vcpu order would not work
properly if the order would exceed def->maxvcpus. Limit the order to the
interval described.
