Use the low level monitor API directly to test the QMP wrapper itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu allows and in some cases uses protocol driver names ('file',
'host_device', 'nbd', ...) in the 'backing file format' field of a qcow
to denote a image where the dummy 'raw' driver was not used on top.
Adapt our backing store parser for such cases. The examples added in
previous patch show the difference in behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU allows and in cases where you omit the not-strictly-needed 'raw'
driver on top of raw images automatically uses the protocol name inside
of the 'backing file format' field of the qcow2 image.
Libvirt expects only format names in that field.
Add example images showing this scenario, which will be fixed later.
The qcow2 image files in this commit were formatted as:
qemu-img create -f qcow2 -F nbd -b nbd+tcp://example.org:6000/blah -u qcow2-protocol-backing-nbd.qcow2 10M
and
qemu-img create -f qcow2 -F file -b raw qcow2-protocol-backing-file.qcow2
thus using 'nbd' and 'file' as backing format respectively.
(note that '-b raw' refers to the file in the example image folder)
To satisfy the test, note that the NBD image is also rejected as we
can't probe it, thus such configuration would not work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Compare also the detected format of the backing file
('backingStoreRawFormat' field) into the output data for comparison with
others. Since the ToString function can't convert VIR_STORAGE_FILE_AUTO
use also the numeric value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is mostly straightforward, except for a teensy-weensy
detail: usually, there's no system wide daemon running, no system
wide available socket that anybody could connect to. PipeWire
uses a per user daemon approach instead. But this in turn means,
that the socket location floats between various locations and is
derived from various environment variables (just like the actual
socket name) and thus we must pass the variables to QEMU.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/560
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU gained support for PipeWire audio backend (see QEMU commit
of v8.0.0-403-gc2d3d1c294). Its configuration knobs are basically
the same as pulseaudio's, except for PA's server name. Therefore,
a lot of code is copied over from pulseadio and fixed by
s/Pulse/Pipewire/ or s/pulseaudio/pipewire/.
There's one ley difference to PA though: pipewire daemon is
usually on per user basis (just like our qemu:///session).
Therefore, introduce this 'runtimeDir' attribute, which allows
specifying path to pipewire daemon socket (useful for
qemu:///system for instance).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Differences from qemu:
* "vmx-ept-uc" (bit 8) and "vmx-ept-wb" (bit 14) are not added to
qemu's list of named features yet, but used in several qemu cpu
models never the less. Add to libvirt regardless.
* "vmx-invvpid-single-context" (bit 41) is erroneously called
"vmx-invept-single-context" in qemu. This is the name of the
feature associated with bit 25 in both libvirt and qemu.
* "vmx-invvpid-single-context-noglobals" (bit 43) is erroneously
called "vmx-invept-single-context-noglobals". Use the correct name.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
While glibc provides qsort(), which usually is just a mergesort,
until sorting arrays so huge that temporary array used by
mergesort would not fit into physical memory (which in our case
is never), we are not guaranteed it'll use mergesort. The
advantage of mergesort is clear - it's stable. IOW, if we have an
array of values parsed from XML, qsort() it and produce some
output based on those values, we can then compare the output with
some expected output, line by line.
But with newer glibc this is all history. After [1], qsort() is
no longer mergesort but introsort instead, which is not stable.
This is suboptimal, because in some cases we want to preserve
order of equal items. For instance, in ebiptablesApplyNewRules(),
nwfilter rules are sorted by their priority. But if two rules
have the same priority, we want to keep them in the order they
appear in the XML. Since it's hard/needless work to identify
places where stable or unstable sorting is needed, let's just
play it safe and use stable sorting everywhere.
Fortunately, glib provides g_qsort_with_data() which indeed
implement mergesort and it's a drop in replacement for qsort(),
almost. It accepts fifth argument (pointer to opaque data), that
is passed to comparator function, which then accepts three
arguments.
We have to keep one occurance of qsort() though - in NSS module
which deliberately does not link with glib.
1: https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=03bf8357e8291857a435afcc3048e0b697b6cc04
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Upcoming test bump will cause some changes thus preserve the existing
state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
CPU host model expansion depends on the CPU data from the capabilities
and can change based on emulation type. Add complementary tests to the
ones we already have to ensure full coverage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cpu-host-model.xml test case uses 'kvm' whereas the
fallback/nofallback cases use tcg in the definition. Rename them
accordingly so that the complement cases can be added later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Migration compression parameters 'compress-level', 'compress-threads',
'decompress-threads' were deprecated by qemu. Drop them from the tests.
Note that the migration code automatically checks whether given
capability is supported by qemu and thus we don't need to add any
further code to prepare for the legacy compression to be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some sub-tests dereference 'data->vm' even when it is NULL.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Xcode 15, which provides the compiler toolchain for building libvirt
on macOS has switched to a new linker that warns about duplicated
"-lblah" options on the ld commandline. In practice this is impossible
to prevent in a large project, and also harmless.
Fortunately the new ld command also has an option,
-no_warn_duplicate_libraries, that supresses this harmless/pointless
warning, meson has a simple way to check if that option is supported,
and libvirt's meson.build files already have examples of adding an
option to the ld commandline if it's available.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This environment variable is supposedly set according to the contents
of ~/.CFUserTextEncoding, and certainly on MacOS 14 (Sonoma) it is set
in the environment of child processes created by execve() (used by
virCommand()), causing commandtest to fail. (However, the value that is
shown in $__CF_USER_TEXT_ENCODING during the test 1) is not in the
environment of the shell the test is run from, and 2) doesn't match
the contents of ~/.CFUserTextEncoding.)
It is true, though, that filtering out this environment setting from
the test results permits commandtest to pass on macOS 14 (Sonoma).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_SKIP_UNMAP is no longer
referenced inside the code.
QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_AUTO_READONLY is passed from
various code paths to the qemuBlockStorageSourceGetBackendProps helper,
but it's no longer used.
Both thus can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helper in qemuBlockStorageSourceGetBlockdevStorageSliceProps
to format the common bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the same ordering of the relevant fields as we do for the format
layer -blockdev so that later they can be refactored without test
fallout.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Legacy mode used to be needed for use with -drive, which was almost
completely deleted. We now have qemuxml2argvtest test cases checking a
few cases and the rest uses the modern mode only. Thus we don't need to
test the legacy mode any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Condition handling failure of the first virTestRun was lacking the 'ret
= -1' line thus the subsequent line was taken as it's body rendering the
first invocation useless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU deprecated and removed support for those protocols, but due to a
logic bug in the tests it was not caught. Remove the test cases first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v8.1.0-2161-ga95260486a
Notable changes:
- new CPU topology parameters: 'books', 'drawers'
- new migration parameter 'avail-switchover-bandwidth'
- new s390x CPU properties: 'dedicated', 'entitlement'
- new 'hostmem' parameter for 'virtio-gpu'
- new device 'piix4-isa'
- new property 'dynamic-memslots' of 'virtio-mem' device
- new 'gsi*' parameters of 'ICH9-LPC'
- new experimental 'x-south-bridge' machine option
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Test cases that depend on duplicating fds are using fairly big
values as targets.
This works fine on Linux, where RLIMIT_NOFILE is 1024 by
default, but fails on macOS which uses 256 as the default.
Decrease the values so that they're valid across all platforms.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Both tests pass a disk source definition which didn't go through the
preparation steps and thus contains only the target information that
were originally present, thus we should be using the
QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_TARGET_ONLY flag.
For the same reason QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_AUTO_READONLY
used in 'testJSONtoJSON' doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a few examples of SD cards backed with network storage to capture
the current state as the formatter code is about to be refactored.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test code cares mostly about the actual layer nodenames thus,
appropriate accessors are used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all places in tests to use the 'storage' layer nodename
accessors instead of (virStorageSource)->nodestorage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuBlockStorageSourceGetFormatProps as it formats the properties of
the 'format' driver in qemu. Adjust the comment which was hinting
otherwise.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the node name of the storage access driver to identify the block job
volumes. This will prepare the blockjob code for the possibility that the
format layer may be missing. Our lookup code can find either of them,
thus we can safely switch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable the flags in the status xml2xmtest and add an exaple to the test
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As of v9.4.0-rc2~5 it is possible to specify guest address where
a virtio-mem/virtio-pmem memory device is mapped to. What that
commit forgot to introduce was a check for overlaps.
And yes, this is technically an O(n^2) algorithm, as
virDomainMemoryDefValidate() is called over each memory device
and after this, virDomainMemoryDefValidate() also iterates over
each memory device. But given there's usually only a handful of
such devices, and this runs only when parsing domain XML I guess
code readability wins over some less obvious solution.
Resolves: https://issues.redhat.com/browse/RHEL-4452
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current message can be misleading, because it seems to suggest
that no firmware of the requested type is available on the system.
What actually happens most of the time, however, is that despite
having multiple firmwares of the right type to choose from, none
of them is suitable because of lacking some specific feature or
being incompatible with some setting that the user has explicitly
enabled.
Providing an error message that describes exactly the problem is
not feasible, since we would have to list each candidate along
with the reason why we rejected it, which would get out of hand
quickly.
As a small but hopefully helpful improvement over the current
situation, reword the error message to make it clearer that the
culprit is not necessarily the firmware type, but rather the
overall domain configuration.
Suggested-by: Michael Kjörling <7d1340278307@ewoof.net>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's not possible to use password-protected ssh keys directly with
libvirt because libvirt doesn't have any way to prompt a user for the
password. To accomodate password-protected key files, an administrator
can add these keys to an ssh agent and then configure the domain with
the path to the ssh-agent socket.
Note that this requires an administrator or management app to
configure the ssh-agent with an appropriate socket path and add the
necessary keys to it. In addition, it does not currently work with
selinux enabled. The ssh-agent socket would need a label that libvirt
would be allowed to access rather than unconfined_t.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, we can support logging in with
an ssh key file. Pass the path to the configured key file and the
username to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, use the configured value for
knownHosts and pass it to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, lookup the password from the
configured secret and securely pass it to the nbdkit process using fd
passing.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
