Not every chardev is plugged onto virtio-serial bus. However, the
code introduced in 89e991a2aa assumes that. Incorrectly.
With previous patches we have three options where a chardev can
be plugged: virtio-serial, USB and PCI. This commit fixes the
attach part. However, since we are not auto allocating USB
addresses yet, I'm just marking the place where appropriate code
should go.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=998813
Implementation is pretty straight-forward. Of course, not all qemus
out there supports the device, so new capability is introduced and
checked prior each use of the device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Most virDomainDiskIndexByName callers do not care about the index; what
they really want is a disk def pointer.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When starting a domain, if a domain specifies security drivers we do not have
loaded, we fail. However we don't check for this during
reconnect, so any operation relying on security driver functionality would fail.
If someone e.g. starts a domain with selinux driver loaded, then they change
the security driver to 'none' in config, restart the daemon and call dump/save/..,
QEMU will return an error.
As we shouldn't kill the domain, we should at least log an error to let the
user know that domain reconnect wasn't completely clean.
https://bugzilla.redhat.com/show_bug.cgi?id=1183893
So far, we are not reporting if numatune was even defined. The
value of zero is blindly returned (which maps onto
VIR_DOMAIN_NUMATUNE_MEM_STRICT). Unfortunately, we are making
decisions based on this value. Instead, we should not only return
the correct value, but report to the caller if the value is valid
at all.
For better viewing of this patch use '-w'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=976387
For a domain configured using the host cdrom, we should taint the domain
due to problems encountered when the host and guest try to control the tray.
Since af2a1f0587,
qemuDomainGetNumaParameters() returns invalid value for a running
guest. The problem is that it is getting the information from cgroups,
but the parent cgroup is being left alone since the mentioned commit.
Since the running guest's XML is in sync with cgroups, there is no need
to look into cgroups (unless someone changes the configuration behind
libvirt's back). Returning the info from the definition fixes a bug and
is also a cleanup.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1221047
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For some reason a union (_virNodeDevCapData) that had only been
declared inside the toplevel struct virNodeDevCapsDef was being used
as an argument to functions all over the place. Since it was only a
union, the "type" attribute wasn't necessarily sent with it. While
this works, it just seems wrong.
This patch creates a toplevel typedef for virNodeDevCapData and
virNodeDevCapDataPtr, making it a struct that has the type attribute
as a member, along with an anonymous union of everything that used to
be in union _virNodeDevCapData. This way we only have to change the
following:
s/union _virNodeDevCapData */virNodeDevCapDataPtr /
and
s/caps->type/caps->data.type/
This will make me feel less guilty when adding functions that need a
pointer to one of these.
Introduces two new -machine option parameters to the QEMU command to
enable/disable the CPACF protected key management operations for a guest:
aes-key-wrap='on|off'
dea-key-wrap='on|off'
The QEMU code maps the corresponding domain configuration elements to the
QEMU -machine option parameters to create the QEMU command:
<cipher name='aes' state='on'> --> aes-key-wrap=on
<cipher name='aes' state='off'> --> aes-key-wrap=off
<cipher name='dea' state='on'> --> dea-key-wrap=on
<cipher name='dea' state='off'> --> dea-key-wrap=off
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have previously effectively ignored all <controller type='ide'>
elements in a domain definition.
On the i440fx-based machinetypes there is an IDE controller that is
included in the chipset and can't be removed (which is the ide
controller with index='0'>), so it makes sense to ignore that one
controller. However, if an i440fx domain definition has a 2nd
controller, nothing catches this error (unless you also have a disk
attached to it, in which case qemu will complain that you're trying to
use the ide controller named "ide1", which doesn't exist), and if any
other type of domain has even a single controller defined, it will be
incorrectly ignored.
Ignoring a bogus controller definition isn't such a big problem, as
long as an error is logged when any disk is attached to that
non-existent controller. But in the case of q35-based machinetypes,
the hardcoded id ("alias" in libvirt terms) of its builtin SATA
controller is "ide", which happens to be the same id as the builtin
IDE controller on i440fx machinetypes. So libvirt creates a
commandline believing that it is connecting the disk to the builtin
(but actually nonexistent) IDE controller, qemu thinks that libvirt
wanted that disk connected to the builtin SATA controller, and
everybody is happy.
Until you try to connect a 2nd disk to the IDE controller. Then qemu
will complain that you're trying to set unit=1 on a controller that
requires unit=0 (SATA controllers are organized differently than IDE
controllers).
After this patch, if a domain has an IDE controller defined for a
machinetype that has no IDE controllers, libvirt will log an error
about the controller itself as it is building the qemu commandline
(rather than a (possible) error from qemu about disks attached to that
controller). This is done by adding IDE to the list of controller
types that are handled in the loop that creates controller command
strings in qemuBuildCommandline() (previously it would *always* skip
IDE controllers). Then qemuBuildControllerDevStr() is modified to log
an appropriate error in the case of IDE controllers.
In the future, if we add support for extra IDE controllers (piix3-ide
and/or piix4-ide) we can just add it into the IDE case in
qemuBuildControllerDevStr(). For now, nobody seems anxious to add
extra support for an aging and very slow controller, when there are so
many better options available.
Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1176071 (Fedora)
This makes sure that that the commandlines generated for devices and
controller devices are all using the alias that has been set in the
controller's object as the id of the controller, rather than
hardcoding a printf (or worse, encoding exceptions to the standard
${controller}${index} into the logic)
Since this "fixes" the controller name used for the sata controller,
the commandline arg for the sata controller in the sata test case had
to be adjusted to be "sata0" instead of "ahci0". All other tests
remain unchanged, verifying that the patch causes no other functional
change.
Because the function that finds a controller alias based on a device
def requires a pointer to the full domainDef in order to get the list
of controllers, the arglist of a few functions had to have this added.
There are a few extra exceptions that weren't being accounted for when
creating the alias for a controller. This resulted in 1) incorrect
status XML, and 2) exceptions/printfs of what *should* have been
directly available in the controller alias when constructing device
commandline arguments:
1) The primary (and only) IDE controller on a 440FX machinetype is
hardcoded to be "ide" in qemu.
2) The primary SATA controller on a 440FX machinetype is also
hardcoded to be "ide" in qemu.
3) On machinetypes that don't support multiple PCI buses, the PCI bus
is hardcoded in qemu to have the name "pci".
4) The first usb master controller is "usb", all others are the normal
"usb%d". (note that usb controllers that are not a "master" will have
the same index, and thus alias, as the master).
We needed to pass in the full domainDef and qemuCaps in order to
properly make the decisions about these exceptions.
When cancelling drive mirror, always try to do that for all disks even
if it fails for some of them. Report the first error we saw.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of redoing the same filtering over and over everytime we need to
walk through all disks which are being migrated.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As of eeb008dbfc the variable is not used anymore. Drop it.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the XML we have the vnc port number, but QEMU takes on command line
a vnc screen number, it's port-5900. We should fail with error message
that only ports in range [5900,65535] are valid.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1164966
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1220809
When cold-plugging an RNG device but something fails in
qemuDomainAssignAddresses, we will double free the RNG device.
Once a device is plugged into the domain, we should set the
device pointer to NULL to fix this issue.
...
5 0x00007fb7d180ac8a in virFree at util/viralloc.c:582
6 0x00007fb7d1895cdd in virDomainRNGDefFree at conf/domain_conf.c:19786
7 0x00007fb7d1895d99 in virDomainDeviceDefFree at conf/domain_conf.c:2022
8 0x00007fb7b92b8baf in qemuDomainAttachDeviceFlags at qemu/qemu_driver.c:8785
9 0x00007fb7d190c5d7 in virDomainAttachDeviceFlags at libvirt-domain.c:8488
10 0x00007fb7d23af9d2 in remoteDispatchDomainAttachDeviceFlags at remote_dispatch.h:2842
...
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The code to add device type to the commandline was identical for lsi
and other models of SCSI controllers, but was duplicated (with the
exception of a minor ordering difference of the if-else clauses) for
the two cases. This patch replaces those two with a single instance of
the code just before the if().
This patch makes qemuValideDevicePCISlotsChipsets() more consistent in
appearance by replacing several clauses of an if with the equivalent
call to qemuDomainMachineIsI440FX. The if was checking exactly the
same items, just in a slightly different order.
Since libvirt doesn't call to update the new balloon size in qemu add
code that will handle tweaking of the size of the current balloon
statistic until qemu reports the new size using the event.
Use the new domain list collection helpers to avoid going through
virDomainPtrs.
This additionally implements filter capability when called through the
api that accepts domain list filters.
Extend it to a universal helper used for clearing lists of any objects.
Note that the argument type is specifically void * to allow implicit
typecasting.
Additionally add a helper that works on non-NULL terminated arrays once
we know the length.
https://bugzilla.redhat.com/show_bug.cgi?id=890648
So, imagine you've issued an API that involves guest agent. For
instance, you want to query guest's IP addresses. So the API acquires
QUERY_JOB, locks the guest agent and issues the agent command.
However, for some reason, guest agent replies to initial ping
correctly, but then crashes tragically while executing real command
(in this case guest-network-get-interfaces). Since initial ping went
well, libvirt thinks guest agent is accessible and awaits reply to the
real command. But it will never come. What will is a monitor event.
Our handler (processSerialChangedEvent) will try to acquire
MODIFY_JOB, which will fail obviously because the other thread that's
executing the API already holds a job. So the event handler exits
early, and the QUERY_JOB is never released nor ended.
The way how to solve this is to put flag somewhere in the monitor
internals. The flag is called @running and agent commands are issued
iff the flag is set. The flag itself is set when we connect to the
agent socket. And unset whenever we see DISCONNECT event from the
agent. Moreover, we must wake up all the threads waiting for the
agent. This is done by signalizing the condition they're waiting on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Running shutdown with mode agent on a shutoff domain gives cryptic
error message:
virsh # shutdown --mode agent gentoo
error: Failed to shutdown domain gentoo
error: Guest agent is not responding: QEMU guest agent is not connected
After this patch, the error is more clear:
virsh # shutdown --mode agent gentoo
error: Failed to shutdown domain gentoo
error: Requested operation is not valid: domain is not running
Reported-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Allow ccw devices to be used with multiqueues. ccw provides a one to
one relation of fds to queues and does not support the vectors option.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Coverity points out that qemuMonitorGetAllBlockStatsInfo could return a
-1 and thus not fill in 'stats' (leaving it NULL). Then the call to
qemuMonitorBlockStatsUpdateCapacity will dereference it.
Coverity complains over the [n]values pairing in virQEMUCapsFreeStringList
and rather than make a bunch if "if values" checks prior to calling, by
just adding the values check inside the free function we avoid the chance
that somehow nvalues is > 0, while values == NULL
Coverity points out it was possible to have a zero return from
qemuBuildRNGBackendProps thus not filling in 'props' and then
causing a NULL dereference on the next call.
Coverity notes that ->ifname is used after the VIR_FREE done in the
code path after the call to virNetDevMacVLanDeleteWithVPortProfile
by a call to virNetDevOpenvswitchRemovePort.
Since the ->ifname will be VIR_FREE()'d eventually in virDomainNetDefFree
just remove the extraneous VIR_FREE here.
When originally added, the Openvswitch code wasn't present and checks
were made for non NULL prior to use.
Coverity complains that in the error paths both the < 0 condition and
the success path after the qemuDomainObjExitMonitor failure will end
up going to cleanup. So just use ignore_value in this error path to
resolve the complaint.
The only version that's supported in QEMU is version 2, currently.
Fortunately, it is enabled by aarch64 automatically, so there's
nothing for us that needs to be put onto command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When migrating a domain while changing its name and using
VIR_MIGRATE_PERSIST_DEST flag, libvirt would fail to properly change the
name in the persistent definition. The inconsistency results in weird
behavior when dumping domain XML, destroying the domain, restarting
libvirtd and likely in several other situations.
Since the new name is already stored in vm->def->name, we just need to
make sure the persistent definition uses this new name too.
https://bugzilla.redhat.com/show_bug.cgi?id=1076354
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Set the capability based on qmp query, or qemu version. The qmp query
includes vmport with 2.2, but no longer with 2.3. It lists only
non-machine specific capabilities, so check the qemu version too until a
machine-specific query is supported.
Now that we have macros for exclusive flags and flag requirements we can
use them to cleanup the code for setvcpus and error out for all wrong
flag combination.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Found by Laine and discussed a bit on internal IRC.
Commit id c56fe7f1d6 added support for creating a command line to support
scsi-disk.channel.
Series was here:
http://www.redhat.com/archives/libvir-list/2012-February/msg01052.html
Which pointed to a design proposal here:
http://permalink.gmane.org/gmane.comp.emulators.libvirt/50428
Which states (in part):
Libvirt should check for the QEMU "scsi-disk.channel" property. If it
is unavailable, QEMU will only support channel=lun=0 and 0<=target<=7.
However, the check added was ensuring that bus != lun *and* bus != 0. So
if bus == lun and both were non zero, we'd never make the second check.
Changing this to an *or* check fixes the check, but still is less readable
than the just checking each for 0
Since the qemu capabilities are not initialized for offline VMs the
caller might get suboptimal error message:
$ virsh blockjob VM PATH --bandwidth 1
error: unsupported configuration: block jobs not supported with this QEMU binary
Move the checks after we make sure that the VM is alive.
