The function always succeeded and after the removal of programing error
checks doesn't even have a 'return false' case. Additionally one of the
tests in 'virpcivpdtest' tested that this function never failed on wrong
data. Embrace this logic and remove the return value and adjust logging
to VIR_DEBUG level to avoid spamming logs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't overwrite already reported errors and improve parsing of
attributes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The errors raised in virNodeDeviceCapVPDParseCustomFields were actually
ignored by continuing the parse rather than raised.
Rather than just replace 'continue' by 'return -1' this patch refactors
the whole parser to simplify it as well as report reasonable errors.
Parsing of individual fields is done without XPath and is extracted into
a common helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers satisfy these checks as they are just for programming
errors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a synthetic case which tests the behaviour if the 'ro' or 'rw'
struct members are uninitialized, basically excercising only a pointless
programming-error NULL check in 'virPCIVPDResourceUpdateKeyword' as real
usage does always pass a proper pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function are never called with NULL argument so the checks can be
removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the callers pass NULL, so the NULL check is pointless. Remove it
an remove the return value.
The function is exported only for use in 'virpcivpdtest' thus marking
the arguments as NONNULL is unnecessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use VIR_DEBUG instead of VIR_INFO as that's more appropriate and report
relevant information for debugging.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case excercises 'virPCIVPDParseVPDLargeResourceString' which is
also tested by other cases which parse the whole VPD block. Remove the
specific test case as it's not adding any additional value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The case checks only the 'virPCIVPDReadVPDBytes' which is also tested
multiple times via 'virPCIVPDParse' as it's used to read the data, thus
having a special case for this is pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virXPathNodeSet' returns -1 only when 'ctxt' or 'xpath' are NULL or
when the 'xpath' string is invalid. Both are programming errors. It
doesn't make sense for the code to overwrite the error message for
anything supposedly more relevant.
The majority of calls to 'virXPathNodeSet' already didn't do this, so
this patch fixes the rest to prevent it from spreading again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the test data to validate '<>' and other characters.
Unfortunately the test suite doesn't have a proper end-to-end test, thus
we just add a XML->XML variant and also add data to the binary parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The check in 'virPCIVPDResourceIsValidTextValue' allows any printable
characters, thus the XML schema should do the same.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit other specific fields which come from the
system data and aren't sanitized enough to be safe for XML were also
formatted via virBufferAsprintf.
Other static and safe strings used virBufferEscapeString instead of
virBufferAddLit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The custom field data is taken from PCI device data which can contain
any printable characters, and thus must be escaped when putting into
XML.
Originally, based on the comment and XML schema which was fixed in
previous commits the idea seemed to be that the parser would validate
that only characters which don't break the XML would be present but that
didn't seem to materialize.
Switch to proper escaping of the XML.
Fixes: 3954378d06
Resolves: https://issues.redhat.com/browse/RHEL-22314
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is never called with NULL argument. Remove the check and
refactor the rest including the debug statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function does not reject '&', '<', '>' contrary to what it actually
states. Move and adjust the comment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing under the 'cleanup:' label thus the whole code can be
simplified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Originally the migration code didn't register the NBD disk port with the
port allocator when it was manually specified. Later when commit
e74d627bb3 refactored the code and started registering it, the
old logic which was clearing 'priv->nbdPort' in case when it was manually
specified was not removed.
This caused following problems:
- the port was not released after successful migration
- the port was released even when it was not allocated on failures
regarding the NBD server start
- the port was not released on other failures of the migration after
NBD server startup
To address this we remove the assumption that 'priv->nbdPort' is used
only for auto-allocated port and fill it only once the port is
allocated and make the caller of qemuMigrationDstStartNBDServer
responsible for releasing it.
Fixes: e74d627bb3
Resolves: https://issues.redhat.com/browse/RHEL-21543
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add a few debug statements to be able to trace lifetime of a
reserved/allocated port.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Locks in following text:
A: virNetServer
B: virNetServerClient
C: daemonClientPrivate
'virNetServerSetClientAuthenticated' locks A then B
'remoteDispatchAuthPolkit' calls 'virNetServerSetClientAuthenticated'
while holding C.
If a client closes its connection 'virNetServerProcessClients' with the
lock A and B locked will call 'virNetServerClientCloseLocked' which will
try to dispose of the 'client' private data by:
ref(b);
unlock(b);
remoteClientFreePrivateCallbacks();
lock(b);
unref(b);
Unfortunately remoteClientFreePrivateCallbacks() tries lock C.
Thus the locks are held in the following order:
polkit auth: C -> A
connection close: A -> C
causing a textbook-example deadlock. To resolve it we can simply drop
lock 'C' before calling 'virNetServerSetClientAuthenticated' as the lock
is not needed any more.
Resolves: https://issues.redhat.com/browse/RHEL-20337
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Commit 7a39b04d68 ("apparmor: Enable passt support") grants
passt(1) read-write access to /{,var/}run/libvirt/qemu/passt/* if
started by the libvirt daemon. That's the path where passt creates
PID and socket files only if the guest is started by the root user.
If the guest is started by another user, though, the path is more
commonly /var/run/user/$UID/libvirt/qemu/run/passt: add it as
read-write location. Otherwise, passt won't be able to start, as
reported by Andreas.
While at it, replace /{,var/}run/ in the existing rule by its
corresponding tunable variable, @{run}.
Fixes: 7a39b04d68 ("apparmor: Enable passt support")
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1061678
Reported-by: Andreas B. Mundt <andi@debian.org>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Back in 2014, -fstack-protector was reported not to work on
aarch64, so fe881ae086 disabled it on that target. OS-wise,
its use is currently limited to just Linux, FreeBSD and Windows.
Looking at the situation today, it seems that whatever issue was
affecting aarch64 a decade ago has been resolved; moreover,
macOS can also use the feature these days.
I haven't checked any of the other BSDs, but since the feature
works on FreeBSD it's pretty safe to assume that they can use
it too. If we get reports that it's not the case, we can always
further restrict its usage accordingly.
Best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The script expects each of the symbols that it looks for to
be in one of three sections, which in nm(1) are described as
follows:
T - The symbol is in the text (code) section.
B - The symbol is in the BSS data section. This section
typically contains zero-initialized or uninitialized
data, although the exact behavior is system dependent.
D - The symbol is in the initialized data section.
When building on alpha, however, some of the symbols show up
in one of two additional sections, specifically:
S - The symbol is in an uninitialized or zero-initialized
data section for small objects.
G - The symbol is in an initialized data section for small
objects.
In other words, S is the same as B and G is the same as D,
except with some optimization for small objects that for some
reason is applied on alpha but not on other architectures.
I have confirmed that, for all the symbols that the script
complained about being missing on alpha, the section is the
expected one, that is, symbols that are reported as B on x86
are reported as S on alpha, and symbols that are reported as
D on x86 are reported as G on alpha.
Note that, while the B section doesn't seem to be used at all
on alpha, at least in our case, the D section still is.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically creating offline external snapshot required disk-only flag
as well. Now when user requests new snapshot for offline VM and at least
one disk is specified to use external snapshot we will no longer require
disk-only flag as all other not specified disk will use external
snapshots as well.
Resolves: https://issues.redhat.com/browse/RHEL-22797
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce new function qemuSnapshotCreateUseExternal() that will return
true if we will use external snapshots as default location.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The condition was completely wrong. As per the comment for function
virDomainMomentIsAncestor() it checks that the first argument is
descendant of the second argument.
Consider the following snapshot tree for VM:
s1
|
+- s2
| |
| +- s3
|
+- s4
|
+- s5 (current)
When deleting s2 with the original code we checked if
virDomainMomentIsAncestor(s2, s5) which would return false basically for
any snapshot as s5 is leaf snapshot so no children.
When deleting s2 with fixed code we check if
virDomainMomentIsAncestor(s5, s2) which still returns false but when
deleting s4 it will correctly return true.
Before this fix it fails with the following error:
error: Failed to delete snapshot s2
error: invalid argument: could not find base disk source in disk source chain
After the fix it fails with correct error:
error: Failed to delete snapshot s2
error: unsupported configuration: deletion of non-leaf external snapshot that is not in active chain is not supported
Resolves: https://issues.redhat.com/browse/RHEL-23212
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Rectify the condition to remove a domain only if it is not persistent.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It has nothing to do with assigning addresses, so it makes more
sense to have it in qemu_domain.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainGetSCSIControllerModel() can return -1 on failure,
but qemuDomainFindOrCreateSCSIDiskController() didn't implement
any handling for this scenario.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Group things together where it makes sense, avoid unnecessary
uses of 'else if', plus other tweaks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The current defaults, that can be altered on a per-architecture
basis, are derived from the historical x86 behavior.
Every time support for a new architecture is added to libvirt,
care must be taken to override these default: if that doesn't
happen, guests will end up with additional hardware, which is
something that's generally undesirable.
Turn things around, and require architectures to explicitly
ask for the devices to be created by default instead. The
behavior for existing architectures is preserved.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
They reference functions that have since been renamed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These are similar to the minimal cases that we just introduced,
but are intended to demonstrate what device or controller model
libvirt will choose when one is not provided by the user.
Note that we want both regular and ABI_UPDATE variants of the
various test cases because, in some cases, the behavior for new
guests is not the same as that for existing ones due to backward
compatibility concerns.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have just added a number of test cases that supersede it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We currently have a single test case called "minimal", which
suffers from two big flaws:
* it's limited to the x86_64/pc machine type;
* it explicitly enables a number of devices.
Add several test cases, one for each of the architectures and
machine types that we have good support for.
Unlike the existing one, they're *really* minimal: no devices
or controllers at all are present in the input XML. So the new
test cases demonstrate exactly what devices and controller
libvirt will decide to add automatically.
Note that we want both regular and ABI_UPDATE variants of the
various test cases because, in some cases, the behavior for new
guests is not the same as that for existing ones due to backward
compatibility concerns.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This demonstrates that on aarch64, where a native panic device
doesn't exist, it's necessary for the user to specify the model
explicitly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For q35 guests, we normally add a USB controller by default,
but there's a scenario in which we can decide to skip it. Add
test coverage for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have an explicit test case for the feature in
genericxml2xmltest, we can drop a bunch of duplicated accidental
coverage from qemuxmlconftest.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have a few cases in qemuxmlconftest that cover the ability
to set <title> and <description> for a guest as a side effect.
Introduce an explicit case for the functionality in
genericxml2xmltest, as it's not specific to the QEMU driver.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is pretty straightforward.
Resolves: https://issues.redhat.com/browse/RHEL-15316
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI_DYNAMIC_MEMSLOTS reflects
whether QEMU is capable of .dynamic-memslots for virtio-mem.
Use it when validating domain configuration.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Starting from v8.2.0-rc0~74^2~2 QEMU has .dynamic-memslots
attribute for virtio-mem-pci device. Introduce a capability which
reflects that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
