Validate additional XML documents we use for internal testing.
Specifically there's a lot of them belonging to the vmx and bhyve test
suite which were not validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
<name> is mandatory for a domain XML. Add 'displayName' for all the test
cases which were missing them so that <name> is parsed correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's quite a few negative tests. In anticipation of schema testing of
the 'nwfilterxml2xmlin' directory rename all negative/non-conformant
XMLs with the -invalid suffix.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fix the 'flags' of the last rule to conform to the RNG schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The element is not needed for the test and doesn't conform to the domain
XML schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add all appropriate file from our test driver example XML directory.
Note that the two 'node.*' files are actually custom for the test driver
to load full state. We don't have a schema for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Match the correct subsets of the files via the 'dirRegex' property.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases we have directories with mixed XML files in the test
suite. Adding regex filtering will allow testing subsets of the XML
files against schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To allow greater variablitity of XML schema validation tests without
needlessly reparsing the schema we need to refactor the internals to
pass in structs rather than just paths to directory.
This allows to directly implement testing of single files and will
simplify further additions such as filtering of the list of XML files in
a directory.
The list of tested paths is directly ported for now and will be improved
in follow-up patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to the new QMP command once it becomes available. Since the code
was refactored to have just one central location to do this we can
contain the ugly bits to just this one function.
Since we now use the replacement for 'nbd-server-add' mark the test case
as being OK with removal of the command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the monitor code, corresponding generator of properties for NBD and
tests validating it against the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'block-export-add' QMP command is a replacement for 'nbd-server-add'
and will allow greater flexibility. Add a capability so that we can
switch to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update to commit v5.1.0-2207-g96292515c0
Recent changes include deprecation of 'nbd-server-add' and addition of
'block-export-add'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu is going to deprecate this command in the next release. Allow this
as later patches will implement the use of replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the proper video device type when parsing bhyve's commandline into a
XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
The test case is invoked using DO_TEST_FAIL so the XML files are
actually unexpected, unused and actually don't even conform to the RNG
schema for <domain>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All but VIR_CPU_MODE_HOST_MODEL were moved. 'host_model' mode
has nuances that forbid the verification to be moved to parse
time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A few tweaks were made during the move:
- the error messages were changed to mention 'sata controller'
instead of 'ide controller';
- a check for address type 'drive' was added like it is done
with other bus types. The error message of qemuxml2argdata was
updated to reflect that now, instead of erroring it out from the
common code in virDomainDiskDefValidate(), we're failing earlier
with a different error message.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The output virtio-options-memballoon-freepage-reporting.xml of
xml2xmlout is the same as the input. Make it as symlink to save
space.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Always reverse-engineering VMX files, attempt to support SATA disks in
guests, and their controllers.
The esx-in-the-wild-10 test case is taken from RHBZ#1883588, while the
result of esx-in-the-wild-8 is updated with SATA disks.
Fixes (hopefully):
https://bugzilla.redhat.com/show_bug.cgi?id=1677608https://bugzilla.redhat.com/show_bug.cgi?id=1883588
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This provides basic testing for the free-page-reporting feature that is
introduced in qemu 5.1.
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch will introduce the free-page-reporting feature capabilities
that are in qemu 5.1
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, pfifo_fast queueing discipline (qdisc) is set on
newly created interfaces (including TAPs). This qdisc has three
queues and packets that want to be sent through given NIC are
placed into one of the queues based on TOS field. Queues are then
emptied based on their priority allowing interactive sessions
stay interactive whilst something else is downloading a large
file.
Obviously, this means that kernel has to be involved and some
locking has to happen (when placing packets into queues). If
virtualization is taken into account then the above algorithm
happens twice - once in the guest and the second time in the
host.
This is arguably not optimal as it burns host CPU cycles
needlessly. Guest already made it choice and sent packets in the
order it wants.
To resolve this, Linux kernel offers 'noqueue' qdisc which can be
applied on virtual interfaces and in fact for 'lo' it is by
default:
lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
Set it for other TAP devices we create for domains too. With this
change I was able to squeeze 1Mbps more from a macvtap attached
to a guest and to my 1Gbps LAN (as measured by iperf3).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For the virtio-9p bhyve command line argument, the proper order
is mount_tag=/path/to/host/dir, not the opposite.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recently virtio-9p support was added to bhyve.
On the host side it looks this way:
bhyve .... -s 25:0,virtio-9p,sharename=/path/to/shared/dir
It could also have ",ro" suffix to make share read-only.
In the Linux guest, this share is mounted with:
mount -t 9p sharename /mnt/sharename
In the guest user will see the same permissions and ownership
information for this directory as on the host. No uid/gid remapping is
supported, so those could resolve to wrong user or group names.
The same applies to the other side: chowning/chmodding in the guest will
set specified ownership and permissions on the host.
In libvirt domain XML it's modeled using the 'filesystem' element:
<filesystem type='mount'>
<source dir='/path/to/shared/dir'/>
<target dir='sharename'/>
</filesystem>
Optional 'readonly' sub-element enables read-only mode.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As preparation for g_autoptr() we need to change the function to take
only virCgroupPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
"cpu_map.xml" was moved to a directory "cpu_map" and split up into
several files.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There are no more users of VIR_ALLOC or VIR_ALLOC_N.
Delete their test cases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
commandhelper hangs indefinitely in poll() on macOS on commandtest test2
and later because POLLNVAL is returned on revents for input file
descriptor opened from /dev/null, i.e this hangs:
$ tests/commandhelper < /dev/null
BEGIN STDOUT
BEGIN STDERR
^C
But it works fine with regular stdin:
$ tests/commandhelper <<< test
BEGIN STDOUT
BEGIN STDERR
test
test
END STDOUT
END STDERR
The issue is mentioned in poll(2):
BUGS
The poll() system call currently does not support devices.
With the change all 28 cases in commandtest pass.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In 88957116c9 I've switched to -machine memory-backend=ID and
-object memory-backend-* because QEMU is obsoleting -mem-path
and -mem-prealloc. However, what I did not foresee was that using
-machine memory-backend in combination with -numa is not allowed
in QEMU. This was reported upstream and fortunately not released
yet.
The problem is that if domain has NUMA nodes then we will
generate memory-backend-* objects for NUMA nodes (because if QEMU
is new enough to expose default RAM ID it also supports -numa
memdev=) and adding non-NUMA memory backend is wrong.
Reported-by: Masayoshi Mizuma <msys.mizuma@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The feature is filtered by KVM and never automatically enabled. So even
though QEMU definition of EPYC-Rome contains this feature, the guest
won't see it. Also domain capabilities will show it as disabled for KVM
domains. Thus the feature should not really be included in our
definition of EPYC-Rome.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The CPU should be identified as EPYC-Rome, but the QEMU binary used to
gather the original test data did not support this model. Let's update
the supported models to QEMU 5.1.0.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The files contained the "-invalid" marker in their filename, marking
them as test cases that are supposed to fail in the virschematest.
Unfortunately, the "-invalid" marker does not discriminate between
different tests the files might be used in.
A later patch will introduce a new test validating the XML. This
test is not supposed to fail, as the files contain valid XML.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This adds a new value to virConnectCompareCPUFlags,
"VIR_CONNECT_CPU_VALIDATE_XML", that governs XML document validation in
virCPUDefParseXML.
In src/conf/cpu_conf.c, include configmake.h for PKGDATADIR and
virfile.h for virFileFindResource.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is present no XML test coverage for this.
Add genericxml parse + formatting coverage.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The 'checkBitmap' helper uses 'virBitmapFormat' internally and also
reports better errors. Use it instead of the open-coded checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function will also be reusable in other places of the code by making
the size check optional. For now only test12* is refactored since it
used TEST_MAP directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test validates two outputs. Don't reuse 'str' for both.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'test4' was testing three distinct operations on separate instances of a
bitmap. Split it up into 'test4a', 'test4b' and 'test4c' so that the
'bitmap' variable is not reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'test12' was testing two distinct operations on two instances of a
bitmap. Split it up into 'test12a' and 'test12b' so that the 'bitmap'
variable is not reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test an empty bitmap including it's extension via the self-expanding
APIs and and a "0" and "" strings when converting the string back and
forth.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move scope of variables and get rid of the 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's only one combination used so we can remove the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In our wrapper of g_dbus_connection_call_sync() in
virfirewalltest a string is duplicated and added onto a
virStringList. This leads to a memory leak because
virStringListAdd() duplicates the string itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With us switching to glib more and more it is easy to get things
wrong (as can be seen in the previous commit). Set G_DEBUG
variable to "fatal-warnings" which causes GLib to abort the
program at the first call to g_warning() or g_critical().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
GLib implementation of g_dbus_connection_call_sync() calls
g_variant_ref_sink() on the passed @parameters to make sure they have
proper reference. If the original reference is floating the
g_dbus_connection_call_sync() consumes it, but if it's normal reference
it will just add another one.
Our mock functions were only freeing the @parameters which is incorrect
and doesn't reflect how the real implementation works.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I've found two files under qemuxml2xmloutdata/ that are the same
as in qemuxml2argvdata/. Replace them with symlinks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
So far, Libvirt configures memory-backend-* for memory hotplug,
possibly NUMA nodes and in a few other cases. This patch
switches to constructing the memory-backend-* command line for
all cases. To keep ability to migrate guests a little hack is
used: the ID of the object is set to the one that QEMU uses
internally anyways. These IDs are stable (first started to appear
somewhere around v0.13.0-rc0~96) and can't change.
In fact, this patch does exactly what QEMU does internally. The
reason for moving the logic into Libvirt is that QEMU wants to
deprecate the old style of specifying memory.
So far, only x84_64 test cases are changed, because tests for
other architectures use older capabilities, which still lack the
QEMU_CAPS_MACHINE_MEMORY_BACKEND capability and they don't report
the RAM ID.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836043
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The machine structure has another (optional) attribute:
default-ram-id, which specifies the alias of the default RAM
object. While the alias is private, it can never change in order
to not break migration. QEMU uses the alias when allocating
regular, not NUMA memory. In order to switch to new command line
and maintain migration, save this ID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All three memory backends (-file, -ram and -memfd) have .prealloc
attribute. Since we are setting it only for -file, the
corresponding code lives only under if() that handles that
specific backend. But in near future we will want to set the
attribute for other backends too. Therefore, move the
corresponding code outside of the if().
This causes some .argv files to be changed, but the only change
happening there is move of the attribute (best viewed with:
'git show --color-words=.').
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This capability tracks whether "usb-host" device has "hostdevice"
attribute. This attribute allows us to specify full path to the
USB device ("/dev/bus/usb/$bus/$dev") but more importantly, since
QEMU uses qemu_open() for this attribute it allows us to pass
pre-opened FD and have QEMU not bother with opening the file at
all.
The attribute was added in v5.1.0-rc0~71^2~1 QEMU commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Mid-cycle caps resync. Notable change is that virtio-blk enables
multiqueue by default and the addition of
'calc-dirty-rate'/'query-dirty-rate' QMP commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We didn't actually use this file. Change the disk type to 'file' so that
it works in qemu and add pre and post-blockdev invocations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
'virTestCompareToFile' automatically fixes newline if it is not present
in the input string but is present in the file. In this case we need to
append the erorr messages with a newline so that
VIR_TEST_REGENERATE_OUTPUT produces files which will pass syntax-check.
Fixes: 9ec77eef2d
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit f253dc90f5 introduced a test regression in environments with
Xen < 4.10. The logic in libxl_conf.c correctly maps ACPI and APIC
from virDomainObj to libxl_domain_conf based on
LIBXL_HAVE_BUILDINFO_APIC, but the tests did not account for the
different libxl_domain_conf JSON representations.
One approach to fixing the test regression is to duplicate JSON test
data files, having one set for Xen <= 4.9 and another for Xen 4.10
and greater. To avoid duplicate data files, this patch takes the
approach of modifying the libxl_domain_conf object based on
LIBXL_HAVE_BUILDINFO_APIC, before retrieving the JSON representation.
It allows using the same test data files for all supported versions
of Xen by adjusting the intermediate form of libxl_domain_conf object
as needed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add minimal coverage for non-x86_64 timer validation
from commit 2f5d8ffebe
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When an error is expected, the error message will be checked.
This is expressed by creating an additional ".err" file containing
the expected error message.
It is added in order to make sure the expected errors
are not masked by other errors during test execution while
leveraging the existing framework.
In order to keep it simple, an input file cannot be reused
anymore to cover several expected error cases configured
in the test code. An input file can still be reused by creating
a test case specific symlink.
For consistency, the mock needs to report an error now, too,
as every failure must have an error; otherwise a test case will
fail.
Require LC_ALL=C explicitly to make sure error messages are not
localized for testing.
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code path is invoked by one of the test cases. Upcoming testing of
error messages would fail.
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add an abort() on the class/object allocation failures so that
virStorageSourceNew() always returns a virStorageSource and remove
checks from all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The alignment for the pSeries NVDIMM does not depend on runtime
constraints. This means that it can be done in device parse
time, instead of runtime, allowing the domain XML to reflect
what the auto-alignment would do when the domain starts.
This brings consistency between the NVDIMM size reported by the
domain XML and what the guest sees, without impacting existing
guests that are using an unaligned size - they'll work as usual,
but the domain XML will be updated with the actual size of the
NVDIMM.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We set WITH_LIBATTR in meson.build, not WITH_ATTR.
Also link securityselinuxlabeltest with test_qemu_driver_lib.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 3ace72965c
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Various places reported by cppcheck's invalidPrintfArgType_sint
and invalidPrintfArgType_uint.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Sometimes parallel compilation randomly fails on platforms
that do not have many drivers enabled, like macOS:
In file included from ../tests/esxutilstest.c:13:
../src/esx/esx_vi_types.h:62:10: fatal error: 'esx_vi_types.generated.typedef' file not found
#include "esx_vi_types.generated.typedef"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
List esx_gen_headers as a source to stop meson from building
it before the headers are generated.
https://gitlab.com/libvirt/libvirt/-/jobs/726039284
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Right now, the logic that takes care of deciding whether expensive
tests should be run or not is not working correctly: more
specifically, it's not possible to use something like
$ VIR_TEST_EXPENSIVE=1 ninja test
to override the default choice, because in meson.build we always
pass an explicit value that overrides whatever is present in the
environment.
We could implement logic to make this work properly, but that
would require some refactoring of our test infrastructure and is
arguably of little value given that running
$ meson build -Dexpensive_tests=enabled
is very fast, so let's just stop telling users about the variable
instead and call it a day.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Support setting a password for the VNC framebuffer using the passwd
attribute on the <graphics/> element, if the driver has the
BHYVE_CAP_VNC_PASSWORD capability.
Note that virsh domxml-from-native does not output the password in the
generated XML, as VIR_DOMAIN_DEF_FORMAT_SECURE is not set when
formatting the domain definition.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The resolution of the VNC framebuffer can now be set via the resolution
definition introduced in 5.9.0.
Also, add "gop" to the list of model types the <resolution/>
sub-element is valid for.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new helper function, bhyveParsePCIFbuf, to parse the bhyve-argv
parameters for a frame-buffer device to <graphics/> and <video/>
definitions.
For now, only the listen address, port, and vga mode are detected.
Unsupported parameters are silently skipped.
This involves upgrading the private API to expose the
virDomainGraphicsDefNew helper function, which is used by
bhyveParsePCIFbuf.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In [1], changes were made to remove the existing auto-alignment
for pSeries NVDIMM devices. That design promotes strange situations
where the NVDIMM size reported in the domain XML is different
from what QEMU is actually using. We removed the auto-alignment
and relied on standard size validation.
However, this goes against Libvirt design philosophy of not
tampering with existing guest behavior, as pointed out by Daniel
in [2]. Since we can't know for sure whether there are guests that
are relying on the auto-alignment feature to work, the changes
made in [1] are a direct violation of this rule.
This patch reverts [1] entirely, re-enabling auto-alignment for
pSeries NVDIMM as it was before. Changes will be made to ease
the limitations of this design without hurting existing
guests.
This reverts the following commits:
- commit 2d93cbdea9
Revert "formatdomain.html.in: mention pSeries NVDIMM 'align down' mechanic"
- commit 0ee56369c8
qemu_domain.c: change qemuDomainMemoryDeviceAlignSize() return type
- commit 07de813924
qemu_domain.c: do not auto-align ppc64 NVDIMMs
- commit 0ccceaa57c
qemu_validate.c: add pSeries NVDIMM size alignment validation
- commit 4fa2202d88
qemu_domain.c: make qemuDomainGetMemorySizeAlignment() public
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg02010.html
[2] https://www.redhat.com/archives/libvir-list/2020-September/msg00572.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Closed file handles need to be initialized to -1, not 0. This caused a
inappropriate double close of stdin, which is not desirable, although
it had no ill effects.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is currently a hang in test27 that exhibits itself on FreeBSD 11.4
only. The behaviour is that virCommandProcessIO gets POLLIN on the
FD for stdout, but read() blocks. Meanwhile commandtest also blocks
in write for stderr because the pipe buffers are full.
This fix in commandhelper likely does not really address the root cause
just hides it due to the buffering done by FILE *. Mixing UNIX FD I/O
and FILE * I/O is bad practice regardless.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, slot 1 is only allowed to be used by the LPC device.
Relax this requirement and allow to use slot 1 if it was explicitly
specified by the user for any other device type. In this case the LPC
device will have the next available address.
If slot 1 was not used by the user, it'll be reserved for the LPC
device, even if it is not configured to make address assignment
consistent in case the LPC device becomes necessary (e.g. the user
adds a console or a video device which require LPC).
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Support modeling of the 'isa' controller for bhyve. User can manually
define any PCI slot for the 'isa' controller, including PCI slot 1,
but other devices are not allowed to use this address.
When domain configuration requires the 'isa' controller to be present,
automatically add it on domain post-parse stage.
Now, as this controller is always available when needed, it's not
necessary to implicitly add it to the bhyve command line, so remove
bhyveBuildLPCArgStr().
Also, make bhyveDomainDefNeedsISAController() static as it's no longer
used outside of bhyve_domain.c.
As more than one ISA controller is not supported by bhyve,
and multiple controllers with the same index are forbidden,
so forbid ISA controllers with non-zero index for bhyve.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The storage driver was wired up to support creating raw volumes in LUKS
format, but was never adapted to support LUKS-in-qcow2. This is trivial
as it merely requires the encryption properties to be prefixed with
the "encrypt." prefix, and "encrypt.format=luks" when creating the
volume.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The two removed files have exactly the same config as other LUKS volume
data files, simply with different file names. Consolidate down to just
two LUKS volume data files as that's all that we need for the test
coverage.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
b_info->u.hvm.{acpi,apic} are deprecated. But also, on recent libxl
version (4.14) the old one seems to be broken. While libxl part should
be fixed too, update the usage here and at some point drop support for
the old version.
b_info->acpi was added in Xen 4.8
b_info->apic was added in Xen 4.10
Xen 4.10 is the oldest version that still has security support (until
December 2020).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Rewrite to use GLib DBus instead of libdbus will introduce function with
large number of arguments that we will have to mock for our tests so we
need to extend the number of arguments for our macros.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This test calls into src/util/virfirewalld.c where it uses DBus to
figure out if firewalld is registered. Without the mock it luckily
fails and the test works correctly.
To isolate the tests from host environment we should mock the DBus
calls.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'readonly' hostdev property is stored separately from the
virStorageSource as some hostdevs are not described by a virStorage
source. We need to propagate the flag to the virStorage source also for
iSCSI backends as it's used to generate the backend properties.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1868856
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modify the test case to enable TLS and add private data containing
aliases of objects corresponding to a TLS setup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test that we can cope with a long useralias when generating SCSI hostdev
commandline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU's blockdev nodenames which are used to back SCSI/iSCSI hostdevs are
limited to 32 characters. If a user passes a very long user alias as
name of the host device it's easy to end up with a too-long nodename.
To prevent this from happening don't base the nodename on the possibly
user-specified alias but on the normal sequential node name generator.
We then store the name in the status XML for further use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The secret object is used to pass data to the backend so it's better
fitting to base the secret object name on the SCSI host device backend
name.
Since we store the object alias in the status XML this modification is
safe in regards to existing guests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For upgrade reasons so that we can modify the used nodename we must
generate the old version for all status XMLs which don't have it stored
explicitly.
The change will be required as using the user-provided alias may result
in too-long nodenames which will be rejected by qemu.
Add code which fills in the appropriate old value and add test cases to
validate that it's added and also that existing nodenames are not
overwritten.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a local SCSI host device to validate upcoming generated data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case tests other things besides disk secinfos, so we can make
it more universal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a SCSI host device with a user-specified alias to illustrate the
upcoming changes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make channel subsystem (CSS) devices available in the node_device driver.
The CCS devices reside in the computer system and provide CCW devices, e.g.:
+- css_0_0_003a
|
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
testConfRoundTrip would return 0 (success) if virConfWriteMem succeeded
and virTestCompareToFile failed.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This wires up support for using the new virt-ssh-helper binary with the ssh,
libssh and libssh2 protocols.
The new binary will be used preferentially if it is available in $PATH,
otherwise we fall back to traditional netcat.
The "proxy" URI parameter can be used to force use of netcat e.g.
qemu+ssh://host/system?proxy=netcat
or the disable fallback e.g.
qemu+ssh://host/system?proxy=native
With use of virt-ssh-helper, we can now support remote session URIs
qemu+ssh://host/session
and this will only use virt-ssh-helper, with no fallback. This also lets
the libvirtd process be auto-started, and connect directly to the
modular daemons, avoiding use of virtproxyd back-compat tunnelling.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Three parts of the code all build up the same SSH shell script
snippet for remote tunneling the RPC protocol, but in slightly
different ways. Combine them all into one helper method in the
virNetClient code, since this logic doesn't really belong in
the virNetSocket code.
Note that the this change means the shell snippet is passed to
the SSH binary as a single arg, instead of three separate args,
but this is functionally identical, as the three separate args
were combined into one already when passed to the remote system.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_regex_unref reports an error if called with a NULL argument.
We have two cases in the code where we (possibly) call it on a NULL
argument. The interesting one is in virDomainQemuMonitorEventCleanup.
Based on VIR_CONNECT_DOMAIN_QEMU_MONITOR_EVENT_REGISTER_REGEX, we unref
data->regex, which has two problems:
* On the client side, flags is -1 so the comparison is true even if no
regex was used, reproducible by:
$ virsh qemu-monitor-event --timeout 1
which results in an ugly error:
(process:1289846): GLib-CRITICAL **: 14:58:42.631: g_regex_unref: assertion 'regex != NULL' failed
* On the server side, we only create the regex if both the flag and the
string are present, so it's possible to trigger this message by:
$ virsh qemu-monitor-event --regex --timeout 1
Use a non-NULL comparison instead of the flag to decide whether we need
to unref the regex. And add a non-NULL check to the unref in the
VirtualBox test too.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 71efb59a4dhttps://bugzilla.redhat.com/show_bug.cgi?id=1876907
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In the past we had to declare @cfg and then explicitly unref it.
But now, with glib we can use g_autoptr() which will do the unref
automatically and thus is more bulletproof.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Local socket connections were outright disabled because there was no "server"
part in the URI. However, given how requirements and usage scenarios are
evolving, some management apps might need the source libvirt daemon to connect
to the destination daemon over a UNIX socket for peer2peer migration. Since we
cannot know where the socket leads (whether the same daemon or not) let's decide
that based on whether the socket path is non-standard, or rather explicitly
specified in the URI. Checking non-standard path would require to ask the
daemon for configuration and the only misuse that it would prevent would be a
pretty weird one. And that's not worth it. The assumption is that whenever
someone uses explicit UNIX socket paths in the URI for migration they better
know what they are doing.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
For this we need to make the function accessible (at least privately). The
behaviour will change in following patches and the test helps explaining the
change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Rather than use the names "fial" and "kep", use "fail" and "keep". In
the DO_TEST() macro, to prevent the preprocessor replacing the struct
member names during assignment, use the names "fail_" and "keep_"
instead.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Currently, we are mixing: #if HAVE_BLAH with #if WITH_BLAH.
Things got way better with Pavel's work on meson, but apparently,
mixing these two lead to confusing and easy to miss bugs (see
31fb929eca for instance). While we were forced to use HAVE_
prefix with autotools, we are free to chose our own prefix with
meson and since WITH_ prefix appears to be more popular let's use
it everywhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
MacOS can not pre-load modules, so mock libraries must be built
as shared libraries (without asneeded striping, and undefined
symbols allowed).
Signed-off-by: Scott Shambarger <scott-libvirt@shambarger.net>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Assume commit 0466ff28f2 used case-insensitive replace s/OUT/EXP/
by mistake and this file is still licensed under GPLv2.0+
Undo the change.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
FIxes: 0466ff28f2
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
Add support for the writeFiltering attribute in the domXML to native
config converter. Also include a test.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By default Xen only allows guests to write "known safe" values into PCI
configuration space, yet many devices require writes to other areas of
the configuration space in order to operate properly. To allow writing
any values Xen supports the 'permissive' setting, see xl.cfg(5) man page.
This change models Xen's permissive setting by adding a writeFiltering
attribute on the <source> element of a PCI hostdev. When writeFiltering
is set to 'no', the Xen permissive setting will be enabled and guests
will be able to write any values into the device's configuration space.
The permissive setting remains disabled in the absense of the
writeFiltering attribute, of if it is explicitly set to 'yes'.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
When editing a domain with hotplug enabled, I removed the only
NUMA node it had and got no error. I got the error later though,
when starting the domain. This is not as user friendly as it can
be. Move the validation call out from command line generator and
into domain validator (which is called prior to starting cmd line
generation anyway).
When doing this, I had to remove memory-hotplug-nonuma xml2xml
test case because there is no way the test case can succeed,
obviously.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Previous patch handled the runtime case where a non-x86 host is
fetching /proc/cpuinfo data for a microcode info that we know
it doesn't exist. This change alone speeded everything by a
bit for non-x86, but there is at least one major culprit left.
qemuxml2argvtest does several arch-specific tests, and a good
chunk of them are x86 exclusive. This means that 'hostArch'
will be seen as x86 for these tests, even when running in
non-x86 hosts. In a Power 9 server with 128 CPUs, qemuxml2argvtest
takes 298 seconds to complete in average, and 'perf record'
indicates that 95% of the time is spent in
virHostCPUGetMicrocodeVersion().
This patch mocks virHostCPUGetMicrocodeVersion() to always return
0 in the tests, avoiding /proc/cpuinfo reads. This will make all
tests behave arch-agnostic, and the microcode value being 0 has no
impact on any existing test.
This is a CI speed across the board for all archs, including x86,
given that we're not reading /proc/cpuinfo in the tests. For
a Thinkpad T480 laptop with 8 Intel i7 CPUs, qemuxml2argvtest
went from 15.50 sec to 12.50 seconds. The performance gain is even
more noticeable for huge servers with lots of CPUs. For the
Power 9 server mentioned above, this patch speeds qemuxml2argvtest
to 9 seconds, down from 298 sec.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Some test rely too much on declaring variables in the middle
of the function. Use the macro to locally suppress the warning
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ScanTargets testing code declares some variables
in the middle of main.
Split it out into a separate function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split those initializations that depend on a statement
above them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support qemu commandline passthrough in the domXML to native config
converter. Add tests to check the conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to map sound playback and recording devices to host devices
using "<audio type='oss'/>" OSS audio backend.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
bhyve supports intel hda sound devices that could be specified
on the command like using "-1:0,hda,play=$play_dev,rec=$rec_dev",
where "1:0" is a PCI address, and "$play_dev" and "$rec_dev"
point to the playback and recording device on the host respectively.
Currently, schema of the 'sound' element doesn't allow specifying
neither playback nor recording devices, so for now hardcode
/dev/dsp0, which is the first audio device on the host.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The existing auto-align behavior for pSeries has the idea to
alleviate user configuration of the NVDIMM size, given that the
alignment calculation is not trivial to do (256MiB alignment
of mem->size - mem->label_size value, a.k.a guest area). We
align mem->size down to avoid end of file problems.
The end result is not ideal though. We do not touch the domain
XML, meaning that the XML can report a NVDIMM size 255MiB smaller
than the actual size the guest is seeing. It also adds one more
thing to consider in case the guest is reporting less memory
than declared, since the auto-align is transparent to the
user.
Following Andrea's suggestion in [1], let's instead do an
size alignment validation. If the NVDIMM is unaligned, error out
and suggest a rounded up value. This can be bothersome to users,
but will bring consistency of NVDIMM size between the domain XML
and the guest.
This approach will force existing non-running pSeries guests to
readjust the NVDIMM value in their XMLs, if necessary. No changes
were made for x86 NVDIMM support.
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg01471.html
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The machine types for this cycle were already added and qemu also added
a property for the machine type object called "default-ram-id".
Also "block-bitmap-mapping" is supported as a migration parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu-v5.1.0 is released now. There weren't any noticable changes since
our last update to 'rc2'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Ensure that the migration parameters are formatted properly according to
the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When netdev-add was qapified it took us by surprise and we had to
scramble to fix the internals to format conformant monitor arguments.
Add a last-resort early warning system if this happens to object-add or
device_add. Hopefully qemu developers notify us sooner than this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We'll need to match that a certain part of the qemu schema hasn't grown
new properties unexpectedly. Add a helper which matches an 'object' QMP
schema entry against a template and reports errors if expected types
don't match or new entries are added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There was a report on libvirt-users [1] about the domxml to/from
native converter in the Xen driver not handling PCI addresses
without a domain specification. This patch improves parsing of PCI
addresses in the converter and allows PCI addresses with only
bb:ss.f. xl.cfg(5) also allows either the dddd:bb:ss.f or bb:ss.f
format. A test has been added to check the conversion from xl.cfg
to domXML.
[1] https://www.redhat.com/archives/libvirt-users/2020-August/msg00040.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Update the remaining 'make check' references after the
switch to meson/ninja.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit bcbb026993 converted qemublocktest to use
g_autoptr for virQEMUCaps. To prevent it from crashing,
don't explicitly call virObjectUnref() on this object.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We already allow controlling the initiator IQN for iSCSI based disks.
Add the same for host devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Role(master or peer) controls how the domain behaves on migration.
For more details about migration with ivshmem, see
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/system/ivshmem.rst;hb=HEAD
It's a optional attribute in libvirt, and qemu will choose default
role for ivshmem device if the user is not specified.
With device property 'role', the value can be 'master' or 'peer'.
- 'master' (means 'master=on' in qemu), the guest will copy
the shared memory on migration to the destination host.
- 'peer' (means 'master=off' in qemu), the migration is disabled.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Yang Hang <yanghang44@huawei.com>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We need to modify check-file-access.py to be usable as wrapper for
libvirt tests. This way we can run the tests using this command:
meson test --setup access
which will run all tests using check-file-access.py as a wrapper.
With autotools all file access are written into single file for all
tests and compared once the whole test suite is done.
With Meson we will compare the file access after every single test
because it is used as wrapper now. That requires writing the file
access into separate files for every single test as they are executed
in parallel.
Since the wrapper is used for all tests in Meson including tests outside
of tests directory we have to check for presence of the output file.
We should also cleanup after ourselves.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With the old build system we just list the source files directly for
each test, but this would not work as expected with Meson.
For every binary there is a separate directory with its object files
which would mean all the utils sources would be compiled repeatedly
for every test using them.
Having static libraries ensures that the utils sources are compiled
only once.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Meson doesn't use .libs directory, everything is placed directly into
directories where meson.build file is used.
In order to have working tests and running libvirt directly from GIT we
need to fix all the paths pointing '.libs' directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Meson always defines _FILE_OFFSET_BITS=64 which effectively makes
mocking of non 64-bit stat functions dead code.
On linux it was not an issue because we use the 64-bit versions but
on FreeBSD there are not 64-bit versions, there is only stat & lstat.
We cannot simply drop the check as that would resolve to compilation
error on 64-bit linux:
{standard input}: Assembler messages:
{standard input}:11468: Error: symbol `__xstat64' is already defined
{standard input}:11679: Error: symbol `__xstat64.cold' is already defined
{standard input}:12034: Error: symbol `__lxstat64' is already defined
{standard input}:12245: Error: symbol `__lxstat64.cold' is already defined
So we have to replace the _FILE_OFFSET_BITS with a check if the
corresponding 64-bit version of the stat function exists.
Replicate the meson behavior by always defining _FILE_OFFSET_BITS
instead of using AC_SYS_LARGEFILE otherwise this change would break
our tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With meson we no longer have .libs directory with the actual binary so
we have to take a different approach to detect if running from build
directory.
This is not as robust as for autotools because if you select --prefix
in the build directory it will incorrectly enable the override as well
but nobody should do that.
We have to modify some of the tests to not add current build path into
PATH variable and use the full path for virsh instead. Otherwise it
would be impossible to figure out that we are running virsh from build
directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With autoconf this option controlled if the test suite is compiled by
default or not with the fact that it will be compiled later when
running `make check`.
With meson it is not possible to compile it later when running
`ninja test` as it will be always compiled if referenced by `test()`
function in meson.build files.
Since we cannot postpone compilation of the test suite drop this option
as it will not be converted to meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
One variable per line.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reduce the scope of some variables and mark them as
g_autofree.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Except for a few cases where freeing it explicitly
seems to be done on purpose.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The 'checkoutput' function does have a parameter for a possible
prefix, but it is now unused.
Introduced-by: 241ac07124
Used-by: 62f263a73e
Unused-since: 2dfacbffea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Note that 'numa-mem-supported' turned off for certain machine types
which in turn forced us to generate a newer command line in certain
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU is going to drop 'vxhs' in the upcoming release so we'll need to
track these separately to prevent test suite breakage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already test with real caps so there's no real need for this special
case. While it technically tested the state without TLS encryption key
secrets, it doesn't really matter that much.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'commandhelper' checks effectively whether the parent process is
still around to report whether it was daemonized or not.
This creates a unlikely race condition in cases when we do actually
daemonize the process as the intermediate process used for the
daemonization might not have terminated yet which would report wrong
result leading to test failure.
For now there's just 'test4' which actually daemonizes the process.
Add an argument '--check-daemonize' which asks for retries of the
daemonization check in cases where we expect that the commandhelper is
going to be daemonized and use it in 'test4' to make the test more
reliable.
I've observed the test failure sporadically when my box is under load
e.g. while building two trees at once.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage pool code now attempts to disable COW by default on btrfs,
but management applications may wish to override this behaviour. Thus we
introduce a concept of storage pool features:
<features>
<cow state='yes|no'/>
</features>
If the <cow> feature policy is set, it will be enforced. It will always
return an hard error if COW cannot be explicitly set or unset.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is only used in the ESX driver where, when set to "no", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
VMX conversion parts rewritten to apply on top of previously merged
support for type='generated|static'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When support for MAC addresses having a type='static|generated'
attribute was added in:
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
the VMX -> XML parser was not updated. As a result while we
accept the 'type' attribute on input, we never show it again
on 'output', so we loose information during the roundtrip.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the current formatter, the XML snippets:
<interface type='bridge'>
<mac address='00:0c:29:dd:ee:fe' type='static'/>
<source bridge='br1'/>
</interface>
<interface type='bridge'>
<mac address='aa:bb:cc:dd:ee:fd' type='generated'/>
<source bridge='br2'/>
</interface>
result in
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet1.checkMACAddress = "false"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "static"
ethernet2.address = "aa:bb:cc:dd:ee:fd"
ethernet2.checkMACAddress = "false"
which is flawed, as both type='static' and type='generated' in the XML
turn into 'static' in the VMX config.
The existence of the 'static' attribute is further overriding whether
the checkMACAddress config option is set as a side effect.
Both these pieces of flawed logic were introduced in
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
which intentionally added the 'checkMACAddress' side effect based on
the 'type' attribute.
With this change, we're reverting the handling of checkMACAddress
to match what existed historically. The 'type' attribute now directly
maps to the addressType attribute, so the above config becomes:
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "generated"
ethernet2.generatedAddress = "aa:bb:cc:dd:ee:fd"
ethernet2.generatedAddressOffset = "0"
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The mingw header define time() as a static inline function and this
causes a duplicate definition build failure. Since we're not using the
LD_PRELOAD at all on Mingw, we ideally wouldn't compile any of the
mock libraries. Rather than change the build system now though, this
just stubs out the offending function.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'libvirt-tmp-activewrite' bitmap is added during the 'pivot'
operation of block copy and active layer block commit operations
regardless of whether there are any bitmaps to merge, but was not
removed unless a bitmap was merged. This meant that subsequent attempts
to merge into the same image would fail.
Fix it by checking whether the 'libvirt-tmp-activewrite' would be used
by the code and don't skip the code which would delete it.
This is a regression introduced when we switched to the new code for
block commit in <20a7abc2d2d> and for block copy in <7bfff40fdfe5>. The
actual bug originates from <4fa8654ece>.
https://bugzilla.redhat.com/show_bug.cgi?id=1857735
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
g_new() is used in only 3 places. Switching them to g_new0() will do
no harm, reduces confusion, and helps me sleep better at night knowing
that all allocated memory is initialized to 0 :-) (Yes, I *know* that
in all three cases the associated memory is immediately assigned some
other value. Today.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When upgrading from a libvirt which didn't format private data of a
virStorageSource representing an iSCSI hostdev source, we might need to
generate some internal data so that the code still works as if it was
present in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will need to add another flag for the function so
convert it to a bitwise-or'd array of flags to prevent having 4
booleans.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've used security_context_t for variables passed
to libselinux APIs. But almost 7 years ago, libselinux developers
admitted in their API that in fact, it's just a 'char *' type
[1]. Ever since then the APIs accept 'char *' instead, but they
kept the old alias just for API stability. Well, not anymore [2].
1: 9eb9c93275
2: 7a124ca275
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If the host doesn't have a single IPv4 address assigned to any of
its interfaces, not even the loopback one, then virnetsockettest
will fail with
Cannot identify IPv4/6 availability
because, while the IPv6 bind attempt is conditional, the IPv4 one
is not, and in this case it will always fail.
This commit is better viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is only used in the ESX driver where, when set to "static", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All of the listed functions are available in libselinux version 2.2.
Our supported OSes start with version 2.5 so there is no need to check
it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The old code works correctly with make and running directly from shell
but it failed with Meson test suite where session ID and process group
are the same in both cases.
What changes in both cases is parent process ID so use that instead of
session ID.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All supported OSes have at least libselinux version 2.5 so it's safe
to drop this check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was introduced together with clock-time gnulib module by commit
<d74e5a4dfc434d3a1d01856d013a7f50d910fa95> and removed from libvirt
by commit <86d223a762990c9d529065a2d3b30b6a00ea63dd>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Set FLAT_NAMESPACE_FLAGS to -Wl,-flat_namespace in configure only for
macOS and use it unconditionally in Makefiles.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability tracks whether QEMU is capable of defining HMAT
ACPI table for the guest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To cite ACPI specification:
Heterogeneous Memory Attribute Table describes the memory
attributes, such as memory side cache attributes and bandwidth
and latency details, related to the System Physical Address
(SPA) Memory Ranges. The software is expected to use this
information as hint for optimization.
According to our upstream discussion [1] this is exposed under
<numa/> as <cache/> under NUMA <cell/> and <latency> or
<bandwidth/> under numa/latencies.
1: https://www.redhat.com/archives/libvir-list/2020-January/msg00422.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU allows creating NUMA nodes that have memory only.
These are somehow important for HMAT.
With check done in qemuValidateDomainDef() for QEMU 2.7 or newer
(checked via QEMU_CAPS_NUMA), we can be sure that the vCPUs are
fully assigned to NUMA nodes in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This test case checks that expanding NUMA distance works. On
input we accept if only distance from A to B is specified. On the
output we format the B to A distance too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 82576d8f35 used a string "on" to enable the 'pmem' property.
This is okay for the command line visitor, but the property is declared
as boolean in qemu and thus it will not work when using QMP.
Modify the type to boolean. This changes the command line, but
fortunately the command line visitor in qemu parses both 'yes' and 'on'
as true for the property.
https://bugzilla.redhat.com/show_bug.cgi?id=1854684
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The semantics of the backup operation don't strictly require that all
disks being backed up are part of the same incremental part (when a disk
was checkpointed/backed up separately or in a different VM), or even
they may not have a previous checkpoint at all (e.g. when the disk
was freshly hotplugged to the vm).
In such cases we can still create a common checkpoint for all of them
and backup differences according to configuration.
This patch adds a per-disk configuration of the checkpoint to do the
incremental backup from via the 'incremental' attribute and allows
perform full backups via the 'backupmode' attribute.
Note that no changes to the qemu driver are necessary to take advantage
of this as we already obey the per-disk 'incremental' field.
https://bugzilla.redhat.com/show_bug.cgi?id=1829829
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Call the post-processing function so that we can validate that it does
the correct thing.
virDomainBackupAlignDisks requires disk definitions to be present so
let's fake them by copying disks from the backup definition and add one
extra disk 'vdextradisk'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Replace the output by a copy of the input file for further changes once
we start testing virDomainBackupAlignDisks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow enabling TLS for the NBD server used to do pull-mode backups. Note
that documentation already mentions 'tls', so this just implements the
schema and XML bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add fields for storing the aliases necessary to clean up the TLS env for
a backup job after it finishes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are few internal fields of the backup XML. Propagate the
'internal' flag so that the test can verify the XML infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Avoid printing '0' size in case when we weren't able to determine the
backup size by adding a flag whether the size is valid and interlock
printing of the field according to the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a dummy secret so that we see what command line is generated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Store the required data in the private data of a storage source and
ensure that the 'alias' of the secret is formatted in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With the recent update of Fedora rawhide I've noticed
virnettlssessiontest and virnettlscontexttest failing with:
Our own certificate servercertreq-ctx.pem failed validation
against cacertreq-ctx.pem: The certificate uses an insecure
algorithm
This is result of Fedora changes to support strong crypto [1]. RSA
with 1024 bit key is viewed as legacy and thus insecure. Generate
a new private key then. Moreover, switch to EC which is not only
shorter but also not deprecated that often as RSA. Generated
using the following command:
openssl genpkey --outform PEM --out privkey.pem \
--algorithm EC --pkeyopt ec_paramgen_curve:P-384 \
--pkeyopt ec_param_enc:named_curve
1: https://fedoraproject.org/wiki/Changes/StrongCryptoSettings2
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If initializing test monitor in testQemuHotplugCpuPrepare()
fails, the control jumps to error label where
testQemuHotplugCpuDataFree() is called. But since the data->mon
is NULL due to aforementioned failure,
qemuMonitorTestGetMonitor() dereferences a NULL pointer leading
to a SIGSEGV.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add test with a ZPCI host device and a CCW memballoon device to ensure
that CCW address remains the default address assigned.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
1. Test for auto-generating uids while specifying valid fids
2. Test for auto-generating fids while specifying valid uids
3. Test for parse error while specifying a valid fid and an invalid
uid
4. Test for parse error while specifying two ZPCI devices with same
uid and fid addresses
5. Test for parse error when both uid and fid are set to zero
6. Test for error while specifying uid and not providing ZPCI
capability.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let us fix the issues with zPCI address validation and auto-generation
on s390.
Currently, there are two issues with handling the ZPCI address
extension. Firstly, when the uid is to be auto-generated with a
specified fid, .i.e.:
...
<address type='pci'>
<zpci fid='0x0000001f'/>
</address>
...
we expect uid='0x0001' (or the next available uid for the domain).
However, we get a parsing error:
$ virsh define zpci.xml
error: XML error: Invalid PCI address uid='0x0000', must be > 0x0000
and <= 0xffff
Secondly, when the uid is specified explicitly with the invalid
numerical value '0x0000', we actually expect the parsing error above.
However, the domain is being defined and the uid value is silently
changed to a valid value.
The first issue is a bug and the second one is undesired behaviour, and
both issues are related to how we (in-band) signal invalid values for
uid and fid. So let's fix the XML parsing to do validation based on what
is actually specified in the XML.
The first issue is also related to the current code behaviour, which
is, if either uid or fid is specified by the user, it is incorrectly
assumed that both uid and fid are specified. This bug is fixed by
identifying when the user specified ZPCI address is incomplete and
auto-generating the missing ZPCI address.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The term "access control list" better describes the concept involved.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "permitted list" is a better choice for the filtering
logic applied.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When parsing domain XML post parse callbacks are run and one of
them might try and call API from a non-hypervisor driver (e.g.
just like qemuDomainDeviceNetDefPostParse() is doing - it calls a
network API). To avoid this in the test suite, set dummy drivers,
which renders all non-hypervisor APIs return error.
This mimics what qemuxml2argvtest does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using the DO_TEST_PARSE_ERROR() macro, a failure to parse the input
file is considered a successful test. However, if the input file is
totally missing, that should be distinguished from a parsing error and
not be treated as a test success.
The function virDomainDefParseFile() simply returns NULL for any parse
failure, including a missing file. So we need to explicitly check
whether the file exists first, and fail the test if it is missing.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Although a ramfb video device is not a PCI device, we don't currently
report an error for ramfb device definitions containing a PCI address.
However, a guest configured with such a device will fail to start:
# virsh start test1
error: Failed to start domain test1
error: internal error: qemu unexpectedly closed the monitor: 2020-06-16T05:23:02.759221Z qemu-kvm: -device ramfb,id=video0,bus=pcie.0,addr=0x1: Device 'ramfb' can't go on PCIE bus
A better approach is to reject any device definitions that contain PCI
addresses. While this is a change in behavior, any existing
configurations were non-functional.
https://bugzilla.redhat.com/show_bug.cgi?id=1847259
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
It's possible to use ramfb as the boot display of an assigned vgpu
device. This was introduced in 4b95738c, but unfortunately the attribute
was not formatted into the xml output for such a device. This patch
fixes that oversight and adds a xml2xml test to verify proper behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1847791
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XML format used for QEMU capabilities is not required to be
stable across releases, as we invalidate the cache whenever the
libvirt binary changes.
We none the less always try to parse te entire XML file before
we do any validity checks. Thus if we change the format of any
part of the data, or change permitted values for enums, then
libvirtd logs will be spammed with errors.
These are not in fact errors, but an expected scenario.
This change makes the loading code validate the cache timestamp
against the libvirtd timestamp immediately. If they don't match
then we stop loading the rest of the XML file.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add tests for both supported scenarios: a single TPM Proxy and
a TPM Proxy with a regular TPM device in the same domain.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This tests aims to exercise how a TPM Proxy device can be
added in the domain, either alone or with a regular TPM
device. It also ensures that we do not allow bogus scenarios
to slip by.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A TPM Proxy device can coexist with a regular TPM, but the
current domain definition supports only a single TPM device
in the 'tpm' pointer. This patch replaces this existing pointer
in the domain definition to an array of TPM devices.
All files that references the old pointer were adapted to
handle the new array instead. virDomainDefParseXML() TPM related
code was adapted to handle the parsing of an extra TPM device.
TPM validations after this new scenario will be updated in
the next patch.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This trivial rework is aimed to reduce the amount of line changes
made by the next patch, when 'def->tpm' will become a 'def->tpms'
array.
Instead of using a 'switch' where only the VIR_DOMAIN_TPM_TYPE_EMULATOR
label does something, use an 'if' clause instead.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose the TPM Proxy support for PPC64 guests by creating a new
cap called QEMU_CAPS_DEVICE_SPAPR_TPM_PROXY.
This device is part of the machinery the guest need to orchestrate
with the PPC64 Ultravisor the transition to the Secure VM (SVM)
mode. Inside QEMU, this device will be used with the H_TPM_COMM
hypercall to connect with the TPM Resource Manager, enabling
the guest to open and close TPM sessions with the host TPM.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Format the address width attribute. Depending on the version of
QEMU it is named 'aw-bits' or 'x-aw-bits'.
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new aw_bits attribute to the iommu device to control
the address width of the intel-iommu
Signed-off-by Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Integrate both 'disk-hostdev-scsi-virtio-iscsi-auth-AES' and
'hostdev-scsi-virtio-iscsi-auth' as the new test infrastructure tests
both legacy and 'secret' object cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the iSCSI hostdevs to the same test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modernize the current state to the pre-blockdev version of qemu to
minimize changes. Later patch will add a 'latest' case too.
Additionally this removes duplicated call of the same test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the authenticated iSCSI hostdevs to the same test file.
Additionally this now covers passing secret via the 'secret' object
rather than on the command line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the iSCSI hostdevs to the same test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
"hostdev-scsi-readonly" case tests the readonly disk with a virtio-scsi
controller. Add it for the 'lsi' controller test as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modernize the current state to the pre-blockdev version of qemu to
minimize changes. Later patch will add a 'latest' case too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using virKModConfig would not simplify any existing code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All callers except for the test suite pass the same value
for the second arg, so it can be removed, simplifying the
code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
