Add a new a attribute, deprecated_features='on|off' to the <cpu>
element. This is used to toggle features flagged as deprecated on the
CPU model on or off. When this attribute is paired with 'on',
deprecated features will not be filtered. When paired with 'off', any
CPU features that are flagged as deprecated will be listed under the
CPU model with the 'disable' policy.
Example:
<cpu mode='host-model' check='partial' deprecated_features='off'/>
The absence of this attribute is equivalent to the 'on' option.
The deprecated features that will populate the domain XML are the same
features that result in the virsh domcapabilities command with the
--disable-deprecated-features argument present.
It is recommended to define a domain XML with this attribute set to
'off' to ensure migration to machines that may outright drop these
features in the future.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a new flag, --disable-deprecated-features, to the domcapabilities
command. This will modify the output to show the 'host-model' CPU
with features flagged as deprecated paired with the 'disable' policy.
virsh domcapabilities --disable-deprecated-features
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If flag VIR_CONNECT_GET_DOMAIN_CAPABILITIES_DISABLE_DEPRECATED_FEATURES
is passed to qemuConnectGetDomainCapabilities, then the domain's CPU
model features will be updated to set any deprecated features to the
'disabled' policy.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce domain flag used to filter deprecated features from the
domain's CPU model.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION_DEPRECATED_PROPS for detecting
if query-cpu-model-expansion can report deprecated CPU model properties.
QEMU introduced this capability in 9.1 release. Add flag and deprecated
features to the capabilities test data for QEMU 9.1 and 9.2 replies/XML
since it can now be accounted for.
When probing for the host CPU, perform a full CPU model expansion to
retrieve the list of features deprecated across the entire architecture.
The list and count are stored in the host's CPU model info within the
QEMU capabilities. Other info resulting from this query (e.g. model
name, etc) is ignored.
The new capabilities flag is used to fence off the extra query for
architectures/QEMU binaries that do not report deprecated CPU model
features.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
query-cpu-model-expansion may report an array of deprecated properties.
This array is optional, and may not be supported for a particular
architecture or reported for a particular CPU model. If the output is
present, then capture it and store in a qemuMonitorCPUModelInfo struct
for later use.
The deprecated features will be retained in qemuCaps->kvm->hostCPU.info
and will be stored in the capabilities cache file under the <hostCPU>
element using the following format:
<deprecatedFeatures>
<property name='bpb'/>
<property name='csske'/>
<property name='cte'/>
<property name='te'/>
</deprecatedFeatures>
At this time the data is only queried, parsed, and cached. The data
will be utilized in a subsequent patch.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Refactor the CPU Model parsing functions within
qemuMonitorJSONGetCPUModelExpansion. The new functions,
qemuMonitorJSONParseCPUModelExpansionData and
qemuMonitorJSONParseCPUModelExpansion invoke the functions they
replace and leave room for a subsequent patch to handle parsing the
(optional) deprecated_props field resulting from the command.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This is a follow up of my previous commits. If the number of
vCPUs exceeds some arbitrary value (255) then QEMU requires IOMMU
with EIM and intremap enabled. But in turn, intremap IOMMU
requires split I/O APIC (per virDomainDefIOMMUValidate()). Since
after my previous commits (e.g. v10.10.0-rc1~183) IOMMU is added
automagically, the I/O APIC can be also enabled automagically.
Relates to: https://issues.redhat.com/browse/RHEL-65844
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function return value is invariant since 18f3771, so change
its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since 18f3771, so change
its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since 18f3771, so change
its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since 18f3771, so change
its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
For the full history behind this patch, look at the following:
https://issues.redhat.com/browse/RHEL-7036
commit v10.7.0-101-ga37bd2a15b
commit v10.8.0-rc2-8-gbcd5ae4e73
Summary: original problem was unexpected failure of update-device when
the user hadn't changed anything other than online status of the guest
NIC (which should always be allowed).
The first commit "fixed" this by avoiding the allocation of a new
ActualNetDef (i.e. creating a new networkport) for *all* network
device updates (because that was inappropriately changing which
ethernet physdev should be used for a macvtap connection, which by
design can't be handled in an update-device).
But this commit caused a regression for update-device of bridge-based
network devices (because some the updates of certain attributes *do*
require the ActualNetDef be re-allocated), so...
The 2nd commit narrowed the list of network types that get the "don't
allocate new ActualNetDef" treatment (so that only interfaces
connected to a network that uses a pool of ethernet VFs *being used in
passthrough mode* qualify).
But then it was pointed out that this re-broke simple updates of
devices that used a direct/macvtap network in "bridge" mode (because
it's possible to list multiple physdevs to use for bridge mode, in
which case the network driver attempts to "load balance" (and so a new
allocation might have a different ethernet physdev which, again, can't
be supported in a device-update).
So this (single line of code) patch *widens* the list of network types
that don't allocate a new ActualNetDef to also include the other
direct (macvtap) modes, e.g. bridge, private, etc.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These functions return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
QEMU supports -v1 variant of any CPU model even though the list of
versions is not defined (i.e., even if { .version = 1 } item is
missing).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When adding new CPU models to CPU map it's easy (and very common) to
forget to add the new files to meson.build. We already update index.xml
with the new models so updating meson.build too makes sense.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a migration with --timeout, we create a thread to call the
migration API and in parallel setup a timer for the timeout. The
description of --timeout says: "run action specified by --timeout-*
option (suspend by default) if live migration exceeds timeout", which is
not really the way this feature was implemented. Before live migration
starts we first need to contact the source to get the domain definition
and send it to the destination where a new QEMU process has to be
started. This can take some (unpredictably long) time while the timeout
timer is already running. If a very short timeout is set (which doesn't
really make sense, but it's allowed), we may even end up taking the
timeout action before the actual migration had a chance to start.
With this patch the timeout is started only after we get non-zero
dataTotal from virDomainGetJobInfo, which means the migration (of either
storage or memory) really started.
https://issues.redhat.com/browse/RHEL-41264
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It may happen that, for instance after daemon restart, that one
thread is still in qemuProcessReconnect(), i.e. filling in
runtime information by talking to QEMU on monitor. If another
thread then tries to format domain XML (which is currently
guarded by plain mutex on virDomainObj) it'll produce incomplete
and misleading information (e.g. current size of virtio-mem).
This happens because the reconnecting thread talks to QEMU on
monitor and thus unlocks the domain object frequently allowing
the XML formatting thread to acquire the mutex meanwhile.
Resolves: https://issues.redhat.com/browse/RHEL-71042
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable parsing user aliases in ch driver.
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we do not have a persistent definition, there's no point in
looking for it since we cannot store it.
Also skip the update if the tpm device(s) in the persistent
definition are different.
This fixes the crash when starting a transient domain.
https://issues.redhat.com/browse/RHEL-69774https://gitlab.com/libvirt/libvirt/-/issues/715
Fixes: d79542eec6
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Debian has packaged EDK II for 64-bit RISC-V in directory
/usr/share/qemu-efi-riscv64/.
For usage with libvirt update the AppArmor helper.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
