Introduce parsing and formatting of <dataStore> element. The <dataStore
represents a different storage volume meant for storing the actual
blocks of guest-visible data. The original disk source is then just a
metadata storage for any advanced features.
This currently works only for 'qcow2' images.
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'data-file' is a qcow2 feature which allows storing the actual data
outside of the qcow2 image.
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The previous example will cause the error like:
error: Options --file and --base64 are mutually exclusive
Reported-by: Yanqiu Zhang <yanqzhan@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Virtio-serial-pci device is hot pluggable, loosen the restriction
and allow user to hot plug it.
Signed-off-by: shenjiatong <yshxxsjt715@163.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update to v9.2.0-rc0-42-g3428a3894c
Apart from the changes below there are changes to CPU features reported
by qemu, some of which were reported multiple times previously which no
longer happens.
Notable changes:
- 'reconnect-ms' added and 'reconnect' deprecated for 'stream' variant
of 'netdev-add' backend
- 'BLOCK_IO_ERROR' event removed 'qom-path' parameter
- 'GraniteRapids-v2-x86_64-cpu' added
- 'sm3' hashing algorithm for 'luks' added
- 'acpi-generic-port' object added
- deprecated field 'loaded' of 'secret'/'secret_keyring'/'tls-creds*'
removed
- 'sh4eb' target added
- 'query-migrationthreads' command deprecated
- 'busnr' and 'x-pcie-ext-tag' attributes added for
'ICH9-LPC'/'PIIX4_PM'/'VGA'/'mch'/'pcie-root-port'/'qxl'/'vfio-pci'/
'virtio-*'/'vmware-svga'
devices
- 'stale-tm' property added for 'intel-iommu' device
Experimental features:
- 'device-sync-config' command added
As the addition of the 'reconnect-ms' property of the 'stream' network
backend happened along with deprecation of the 'reconnect' field which
was already in use by libvirt this patch also captures the change to the
new format.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'reconnect' field of 'stream' network backend type is about to be
deprecated so libvirt will need to start using 'reconnect-ms'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'stream' type for 'netdev-add' recently added support for
'reconnect-ms' which supersedes 'reconnect' (now deprecated). Add a
capability which will allow us to switch to the new property.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically the QMP schema lookup queries were grouped by the first
component of the query (which was also sorted), but not fully sorted.
This deteriorated over time. Re-group the query strings now that some
were added at the bottom.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
GSList of iothreads is not allowed to be changed while the
virtual machine is running.
Resolves: https://issues.redhat.com/browse/RHEL-23607
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a VM is being migrated to a destination host it can be made
persistent on the destination by using '--persistent'. That may not
work as intended if '--xml' is used as well as that allows overriding
certain aspects of the VM xml, but does not involve the persistent
definition. In most cases users will need to supply also
'--persistent-xml' with the same set of modification.
Modify the man page to clarify the above so that users don't end up with
broken VM after migrating and restarting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a VM is being migrated to a destination host it can be made
persistent on the destination by using VIR_MIGRATE_PERSIST_DEST. That
may not work as intended if VIR_MIGRATE_PARAM_DEST_XML or the 'xmlin'
parameter is used as that allows overriding certain aspects of the VM
xml, but does not involve the persistent definition.
In most cases users will need to supply also VIR_MIGRATE_PARAM_PERSIST_XML
with the same set of modification.
Modify the man page to clarify the above so that users don't end up with
broken VM after migrating and restarting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The original intention was to improve the behaviour of the
VIR_MIGRATE_PERSIST_DEST flag which makes the VM persistent after
migration on the destination when used with VIR_MIGRATE_PARAM_DEST_XML.
While it worked as intended with p2p migration where the migration is
driven from the virtqemud instance on the source of the migration, which
can distinguish between the user-provided input XML and the one fetched
from the source of the migration, it's not easily possible to achieve
the same behaviour with normal migration driven from the client library.
The approach also still had corner cases (originally deemed worth
changing) such as if the persistent definition was modified it would be
overwritten.
As there is no clear fix which would improve both styles of migrations
with no corner cases revert the change.
Upcoming commits will modify the documentation to add warning about the
use of VIR_MIGRATE_PERSIST_DEST with VIR_MIGRATE_PARAM_DEST_XML/xmlin
without using VIR_MIGRATE_PARAM_PERSIST_XML instead of a code fix.
This reverts commit 6a38559092.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When virtio-(non-)transitional models were introduced, the
documentation was updated to include them; at the same time,
language was introduced indicating that using the existing
virtio model is no longer recommended.
This is unnecessarily harsh, and has resulted in people
incorrectly believing (through no fault of their own) that the
virtio model has been deprecated.
In reality, it's perfectly fine to use the virtio model as the
stress-free option that, while often not producing the ideal
PCI topology, will generally get the job done and work reliably
across libvirt versions and machine types.
Tweak the documentation so that it hopefully carries the
desired message across.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Some VMware guests have a boolean uefi.secureBoot.enabled. If found,
and it's set to "TRUE", and if it's a UEFI guest, then add this clause
into the domain XML:
<os firmware='efi'>
<firmware>
<feature enabled='yes' name='enrolled-keys'/>
<feature enabled='yes' name='secure-boot'/>
</firmware>
</os>
This approximates the meaning of this VMware flag.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Fixes: https://issues.redhat.com/browse/RHEL-67836
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The '-loadvm' commandline parameter has exactly the same semantics as
the HMP 'loadvm' command. This includes the selection of which block
device is considered to contain the 'vmstate' section.
Since libvirt recently switched to the new QMP commands which allow a
free selection of where the 'vmstate' is placed, snapshot reversion will
no longer work if libvirt's algorithm disagrees with qemu's. This is the
case when the VM has UEFI NVRAM image, in qcow2 format, present.
To solve this we'll use the QMP counterpart 'snapshot-load' to load the
snapshot instead of using '-loadvm'. We'll do this before resuming
processors after startup of qemu and thus the behaviour is identical to
what we had before.
The logic for selecting the images now checks both the snapshot metadata
and the VM definition. In case images not covered by the snapshot
definition do have the snapshot it's included in the reversion, but it's
fatal if the snapshot is not present in a disk covered in snapshot
metadata.
The vmstate is selected based on where it's present as libvirt doesn't
store this information.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor the parts of qemuBlockGetNamedNodeData which fetch the names of
internal snapshots present in the on-disk state of QCOW2 images to also
extract the presence of the 'vmstate' section.
This requires conversion of the snapshot list to a hash table as we
always know the name of the snapshot that we're looking for, and the
hash table allows also storing of additional data which we'll use to
store the presence of the 'vmstate'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The internal snapshot code will use the 'snapshot-load' command so we
need to add the corresponding job type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt currently loads snapshots via the '-loadvm' commandline option
but that uses the same logic as the 'loadvm' text monitor command used
to pick the disk image with the 'vmstate' section. Since libvirt now
implements our own logic to pick the 'vmstate' device it can happen that
we pick a different than qemu and thus qemu would fail to load the
snapshot. This happens currently on VMs with UEFI firmware with NVRAM
image in qcow2 format.
To fix this libvirt will need to use the 'snapshot-load' QMP command
instead of relying on '-savevm'.
Implement the monitor bits for 'snapshot-load'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The live VM snapshot code already does handle the NVRAM image when it's
in use, so we should also handle it when modifying/creating the
snapshots via qemu-img when inactive.
Add the handling to qemuSnapshotForEachQcow2 which is used for all
inactive operations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor the function to avoid recursive call to rollback and simplify
calling parameters.
To achieve that most of the fatal checks are extracted into a dedicated
loop that runs before modifying the disk state thus removing the need to
rollback altoghether. Since rollback is still necessary when creation of
the snapshot fails half-way through the rollback is extracted to handle
only that scenario.
Additionally callers would only pass the old 'try_all' argument as true
on all non-creation ("-c") modes. This means that we can infer it from
the operation instead of passing it as an extra argument.
This refactor will also make it much simpler to implement handling of
the NVRAM pflash backing file (in case it's qcow2) for internal
snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The functions are exclusively used in the snapshot module. Move and
rename them:
qemuDomainSnapshotForEachQcow2Raw -> qemuSnapshotForEachQcow2Internal
qemuDomainSnapshotForEachQcow2 -> qemuSnapshotForEachQcow2
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that it's unused except for the recursive call it can be dropped
from all of the call tree.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'virCommand' helpers already look up the full path to the binary in
PATH if it's not specified. This means that the qemu driver doesn't have
to lookup and store the path to 'qemu-img' in the conf object but rather
can be cleaned up to use this new infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Enable virNodeGetMemoryStats API to return the stats of host memory.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Get the JSON profile that the swtpm instance was created with from the
output of 'swtpm socket --tpm2 --print-info 0x20 --tpmstate ...'. Get the
name of the profile from the JSON and set it in the current and persistent
emulator descriptions as 'name' attribute and have the persistent
description stored with this update. The user should avoid setting this
'name' attribute since it is meant to be read-only. The following is
an example of how the XML could look like:
<profile source='local:restricted' name='custom:restricted'/>
If the user provided no profile node, and therefore swtpm_setup picked its
default profile, the XML may now shows the 'name' attribute with the name
of the profile. This makes the 'source' attribute now optional.
<profile name='default-v1'/>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Factor-out code related to adding the --tpmstate option to the swtpm
command line into its own function.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Factor-out code related to adding key to the swtpm command line into its
own function.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Run swtpm_setup with the --profile-name option if the user provided the
name of a profile. swtpm_setup will try to load the profile from
directories with local profiles and distro profiles and if no profile
by this name with appended '.json' suffix could be found there, it will
fall back to try to use an internal profile with the given name.
Also set the --profile-remove-disabled option if the user provided a value
in the remove_disabled attribute in the profile XML node.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add documentation for the TPM backend profile node and point the reader to
further documentation about TPM profiles available in the swtpm man page.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend the parser and XML builder with support for the profile parameter
and its remove_disabled attribute.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend the schema for the TPM emulator profile node. Require that the
profile the user provides is described in a 'source' attribute. An optional
remove_disabled attribute is also supported for swtpm to automatically
remove algorithms from the 'custom' profile if they are disabled by FIPS
mode on the host.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To avoid passing TPM emulator parameters around individually, move them
into a structure and pass around the structure.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While sending API requests that don't need any body, explicitly set
CURLOPT_INFILESIZE to 0.
Without this option, curl sends a chunked request with `Expect: 100-continue`
header. The client, in this case curl, expects a response from the server,
ch in this case, to respond within a timeout period.
If guest definition has a PCI passthrough device configuration,
cloud-hypervisor process cannot respond within above mentioned timeout.
Even if cloud-hypervisor responds after the timeout, curl cannot read
the response. Because of this, virsh request to create a guest, hangs. This
only happens while using "mshv" hypervisor.
By setting CURLOPT_INFILESIZE to O, curl drops the Expect header and
sychronously waits for server to respond.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
