Consistently use "is" or "is not" to compare variables to None,
because doing so is preferrable, as per PEP 8
(http://www.python.org/dev/peps/pep-0008/#programming-recommendations):
> Comparisons to singletons like None should always be done with is or
> is not, never the equality operators.
Add more iSCSI examples including having a secret attached. There are 4 new
examples; one for each way to have an iSCSI - a network disk using virtio,
a passthrough network lun using scsi, a volume disk using "mode='host'",
and a volume disk using "mode='direct'"
https://bugzilla.redhat.com/show_bug.cgi?id=924153
Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with
an attribute relabel='no' in order to try and minimize the
impact of shutdown delays when an NFS server disappears. The idea
was that if a disk is on NFS and can't be labeled in the first
place, there is no need to attempt the (no-op) relabel on domain
shutdown. Unfortunately, the way this was implemented was by
modifying the domain XML so that the optimization would survive
libvirtd restart, but in a way that is indistinguishable from an
explicit user setting. Furthermore, once the setting is turned
on, libvirt avoids attempts at labeling, even for operations like
snapshot or blockcopy where the chain is being extended or pivoted
onto non-NFS, where SELinux labeling is once again possible. As
a result, it was impossible to do a blockcopy to pivot from an
NFS image file onto a local file.
The solution is to separate the semantics of a chain that must
not be labeled (which the user can set even on persistent domains)
vs. the optimization of not attempting a relabel on cleanup (a
live-only annotation), and using only the user's explicit notation
rather than the optimization as the decision on whether to skip
a label attempt in the first place. When upgrading an older
libvirtd to a newer, an NFS volume will still attempt the relabel;
but as the avoidance of a relabel was only an optimization, this
shouldn't cause any problems.
In the ideal future, libvirt will eventually have XML describing
EVERY file in the backing chain, with each file having a separate
<seclabel> element. At that point, libvirt will be able to track
more closely which files need a relabel attempt at shutdown. But
until we reach that point, the single <seclabel> for the entire
<disk> chain is treated as a hint - when a chain has only one
file, then we know it is accurate; but if the chain has more than
one file, we have to attempt relabel in spite of the attribute,
in case part of the chain is local and SELinux mattered for that
portion of the chain.
* src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new
member.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML):
Parse it, for live images only.
(virSecurityDeviceLabelDefFormat): Output it.
(virDomainDiskDefParseXML, virDomainChrSourceDefParseXML)
(virDomainDiskSourceDefFormat, virDomainChrDefFormat)
(virDomainDiskDefFormat): Pass flags on through.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip
when possible.
(virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not
norelabel, if labeling fails.
(virSecuritySELinuxSetFileconHelper): Fix indentation.
* docs/formatdomain.html.in (seclabel): Document new xml.
* docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml:
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml:
New test files.
* tests/qemuxml2argvtest.c (mymain): Run the new tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In one of my previous patches I am removing the hard_limit heuristic to
guess the correct value if none set. However, it turned out, this limit
is hard to guess even for users. We should advise them to not set the
limit as their domains may be OOM killed. Sigh.
Feedback from the polkit developers indicates that the
"_detail_XXXX" attributes are a private implementation
detail. Our examples should be recommending use of the
"action.lookup('XXX')" method instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves the issue that prompted the filing of
https://bugzilla.redhat.com/show_bug.cgi?id=928638
(although the request there is for something much larger and more
general than this patch).
commit f3868259ca disabled the
forwarding to upstream DNS servers of unresolved DNS requests for
names that had no domain, but were just simple host names (no "."
character anywhere in the name). While this behavior is frowned upon
by DNS root servers (that's why it was changed in libvirt), it is
convenient in some cases, and since dnsmasq can be configured to allow
it, it must not be strictly forbidden.
This patch restores the old behavior, but since it is usually
undesirable, restoring it requires specification of a new option in
the network config. Adding the attribute "forwardPlainNames='yes'" to
the <dns> elemnt does the trick - when that attribute is added to a
network config, any simple hostnames that can't be resolved by the
network's dnsmasq instance will be forwarded to the DNS servers listed
in the host's /etc/resolv.conf for an attempt at resolution (just as
any FQDN would be forwarded).
When that attribute *isn't* specified, unresolved simple names will
*not* be forwarded to the upstream DNS server - this is the default
behavior.
The description for <permissions> was copied from the storage volume
section to the storage pool section, but the semantics are different:
1. Currently only the "dir", "fs" and "netfs" storage pools use it.
2. They use it only to build the final directory.
3. A default for the storage volumes can't be set.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Commit ab92ae333 added a cool feature, but didn't document it.
* docs/hacking.html.in: Document debugging a subset of tests.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add to the docs/drvlxc.html.in documentation to describe how to
configure systemd to auto-activate a container when a client
connects to a socket
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The gnulib testsuite is relatively stable - the only times it is
likely to have a test change from pass to fail is on a gnulib
submodule update or a major system change (such as moving from
Fedora 18 to 19, or other large change to libc). While it is an
important test for end users on arbitrary machines (to make sure
that the portability glue works for their machine), it mostly
wastes time for development testing (as most developers aren't
making any of the major changes that would cause gnulib tests
to alter behavior). Thus, it pays to make the tests optional
at configure time, defaulting to off for development, on for
tarballs, with autobuilders requesting it to be on. It also
helps to allow a make-time override, via VIR_TEST_EXPENSIVE=[01]
(much the way automake sets up V=[01] for overriding the configure
time default of how verbose to be).
Automake has some pretty hard-coded magic with regards to the
TESTS variable; I had quite a job figuring out how to keep
'make distcheck' passing regardless of the configure option
setting in use, while still disabling the tests at runtime
when I did not configure them on and did not use the override
variable. Thankfully, we require GNU make, which lets me
hide some information from Automake's magic handling of TESTS.
* bootstrap.conf (bootstrap_epilogue): Munge gnulib test variable.
* configure.ac (--enable-expensive-tests): Add new enable switch.
(VIR_TEST_EXPENSIVE_DEFAULT, WITH_EXPENSIVE_TESTS): Set new
witnesses.
* gnulib/tests/Makefile.am (TESTS): Make tests conditional on
configure settings and the VIR_TEST_EXPENSIVE variable.
* tests/Makefile.am (TESTS_ENVIRONMENT): Expose VIR_TEST_EXPENSIVE
to all tests.
* autobuild.sh: Enable all tests during autobuilds.
* libvirt.spec.in (%configure): Likewise.
* mingw-libvirt.spec.in (%mingw_configure): Likewise.
* docs/hacking.html.in: Document the option.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds two new pages to the website, acl.html describing
the general access control framework and permissions models,
and aclpolkit.html describing the use of polkit as an
access control driver.
page.xsl is modified to support a new syntax
<div id="include" filename="somefile.htmlinc"/>
which will cause the XSL transform to replace that <div>
with the contents of 'somefile.htmlinc'. We use this in
the acl.html.in file, to pull the table of permissions
for each libvirt object. This table is autogenerated
from the enums in src/access/viraccessperms.h by the
genaclperms.pl script.
newapi.xsl is modified so that the list of permissions
checks shown against each API will link to the description
of the permissions in acl.html
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
So that app developers / admins know what access control checks
are performed for each API, this patch extends the API docs
generator to include details of the ACLs for each.
The gendispatch.pl script is extended so that it generates
a simple XML describing ACL rules, eg.
<aclinfo>
...
<api name='virConnectNumOfDomains'>
<check object='connect' perm='search_domains'/>
<filter object='domain' perm='getattr'/>
</api>
<api name='virDomainAttachDeviceFlags'>
<check object='domain' perm='write'/>
<check object='domain' perm='save' flags='!VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE'/>
<check object='domain' perm='save' flags='VIR_DOMAIN_AFFECT_CONFIG'/>
</api>
...
</aclinfo>
The newapi.xsl template loads the XML files containing the ACL
rules and generates a short block of HTML for each API describing
the parameter checks and return value filters (if any).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.
Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.
Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.
This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.
Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
The outbound/@peak is ignored (since QoS was introduced). This is due to
kernel limitation of know allowing ingress filters to have peak just
average rate. However, we should document this limitation to not confuse
users.
Interestingly, we had <code>floor<code> ... </code>outbound</code> which
results in much larger block of text to be written in code style that
intended.
There are two ways to use a iSCSI LUN as disk source for qemu.
* The LUN's path as it shows up on host, e.g.
/dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1
* The libiscsi URI from the storage pool source element host attribute, e.g.
iscsi://demo.org:6000/iqn.1992-01.com.example/1
For a "volume" type disk, if the specified "pool" is of iscsi
type, we should support to use the LUN in either of above 2 ways.
That's why to introduce a new XML tag "mode" for the disk source
(libvirt should support iscsi pool with libiscsi, but it's another
new feature, which should be done later).
The "mode" can be either of "host" or "direct". Use "host" to indicate
use of the LUN with the path as it shows up on host. Use "direct" to
indicate to use it with the source pool host URI (future patches may support
to use network type libvirt storage too, e.g. Ceph)
Makefiles are another easy file to enforce line limits.
Mostly straightforward; interesting tricks worth noting:
src/Makefile.am: $(confdir) was already defined, use it in more places
tests/Makefile.am: path_add and VG required some interesting compression
* cfg.mk (sc_prohibit_long_lines): Add another test.
* Makefile.am: Fix offenders.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Merge the virCommandPreserveFD / virCommandTransferFD methods
into a single virCommandPasFD method, and use a new
VIR_COMMAND_PASS_FD_CLOSE_PARENT to indicate their difference
in behaviour
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the virDomainSetMemoryStatsPeriodFlags() to pass a period defined by
usage of a new --period option in order to set the collection period for the
balloon driver. This may enable or disable the collection based on the value.
Add the --current, --live, & --config options to dommemstat.
When using logical pools, we had to trust the target->path provided.
This parameter, however, can be completely ommited and we can use
'/dev/<source.name>' safely and populate it to target.path.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=952973
https://bugzilla.redhat.com/show_bug.cgi?id=799354
Until now, the "host-model" cpu mode couldn't be influenced. This patch
allows to use the <feature> elements to either enable or disable
specific CPU flags. This can be used to force flags that can be emulated
even if the host CPU doesn't support them.
The existing 'chap' XML logic was never used - just defined. Rather than
try to insert a square peg into a round hole, blow it up and rewrite the
logic to follow the 'ceph' format.
Remove the former "chap.login" and "chap.passwd" fields and replace
with "chap.username" and "chap.secret" in _virStoragePoolAuthChap.
Adjust the virStoragePoolDefParseAuthChap() to process.
Change the rng file to describe the new layout
Update the formatstorage.html to describe the usage of the secret element
to mention that the secret type "iscsi" and "ceph" can be used
to storage pool too.
Update the formatsecret.html to include a reference to the storage pool
Update tests to handle the changes from 'login' and 'passwd' to 'username'
and '<secret>' format
Based on a report by Chandrashekar Shastri, at
https://bugzilla.redhat.com/show_bug.cgi?id=979360
On systems where git cannot access the outside world, a developer
can instead arrange to get a copy of gnulib at the right commit
via side channels (such as NFS share drives), set GNULIB_SRCDIR,
then use ./autogen.sh --no-git. In this setup, we will now
avoid direct use of git. Of course, this means no automatic
gnulib updates when libvirt.git updates its submodule, but it
is expected that any developer in such a situation is already
prepared to deal with the fallout.
* .gnulib: Update to latest, for bootstrap.
* bootstrap: Synchronize from gnulib.
* autogen.sh (no_git): Avoid git when requested.
* cfg.mk (_update_required): Skip automatic rerun of bootstrap if
we can't use git.
* docs/compiling.html.in: Document this setup.
* docs/hacking.html.in: Mention this.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous handling of <a> tags led to some less-than-ideal
layout in HACKING (most noticeable on a mid-sentence reference
to the valgrind home page).
* docs/hacking.html.in: Slight tweaks to <a> tags.
* docs/hacking1.xsl: Move <a> handling...
* docs/hacking2.xsl: ...here.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
<hyperv>
<spinlocks state='off'/>
</hyperv>
results in:
error: XML error: missing HyperV spinlock retry count
Don't require retries when state is off and use virXPathUInt
instead of virXPathString to simplify parsing.
https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19
This patch introduces new element <idmap> for
user namespace. for example
<idmap>
<uid start='0' target='1000' count='10'/>
<gid start='0' target='1000' count='10'/>
</idmap>
this new element is used for setting proc files
/proc/<pid>/{uid_map,gid_map}.
This patch also supports multiple uid/gid elements
setting in XML configuration.
We don't support the semi configuation, user has to
configure uid and gid both.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Implement check whether (maximum) vCPUs doesn't exceed machine
type's cpu-max settings.
On older versions of QEMU the check is disabled.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Historically security issues in libvirt have been primarily
triaged & fixed by the Red Hat libvirt members & Red Hat
security team, who then usually notify other vendors via
appropriate channels. There have been a number of times
when vendors have not been properly notified ahead of
announcement. It has also disadvantaged community members
who have to backport fixes to releases for which there are
no current libvirt stable branches.
To address this, we want to make the libvirt security process
entirely community focused / driven. To this end I have setup
a new email address "libvirt-security@redhat.com" for end
users to report bugs which have (possible) security implications.
This email addr is backed by an invitation only, private
archive, mailing list. The intent is for the list membership
to comprise a subset of the libvirt core team, along with any
vendor security team engineers who wish to participate in a
responsible disclosure process for libvirt. Members of the
list will be responsible for analysing the problem to determine
if a security issue exists and then issue fixes for all current
official stable branches & git master.
I am proposing the following libvirt core team people as
members of the security team / list (all cc'd):
Daniel Berrange (Red Hat)
Eric Blake (Red Hat)
Jiri Denemar (Red Hat)
Daniel Veillard (Red Hat)
Jim Fehlig (SUSE)
Doug Goldstein (Gentoo)
Guido Günther (Debian)
We don't have anyone from Ubuntu on the libvirt core team.
Serge Hallyn is the most frequent submitter of patches from
Ubuntu in recent history, so I'd like to invite him to join.
Alternatively, Serge, feel free to suggest someone else to
represent Ubuntu's interests.
If any other vendors/distros have security people who are
responsible for dealing with libvirt security issues, and
want to join to get early disclosure of issues, they can
suggest people. Existing security team members will vet /
approve such requests to ensure they are genuine.
Anyone on the team / list will be **required** to honour any
embargo period agreed between members for non-public issues
that are reported. The aim will be to have a maximum 2 week
embargo period in the common case, extendable to 1 month if
there is sufficient justification made. If anyone feels they
are unable to follow such an embargo process for whatever
reason, please decline membership of the security list/team.
The patch which follows puts up some docs on the website
about all of this....
Document how to report security bugs and the process that
will be used for addressing them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
aae0fc2a92 removed the #elementsUSB anchor
but did not update the links to point to the new section #elementsHostDev.
Signed-off-by: Philipp Hahn <hahn@univention.de>
This includes adding it to the nodedev parser and formatter, docs, and
test.
An example of the new iommuGroup element that is a part of the output
from "virsh nodedev-dumpxml" (virNodeDeviceGetXMLDesc()):
<device>
<name>pci_0000_02_00_1</name>
<capability type='pci'>
...
<iommuGroup number='12'>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/>
</iommuGroup>
</capability>
</device>
Somehow I put an example of a domain interface with a <vlan> element
into the network documentation.
This patch replaces that with an example of a network definition that
has a vlan element with trunk='yes', multiple tags, and even the new
nativeMode attribute. It also includes a <portgroup> that has a vlan
defined.
This patch adds functionality to allow libvirt to configure the
'native-tagged' and 'native-untagged' modes on openvswitch networks.
Signed-off-by: Laine Stump <laine@redhat.com>
All APIs that take typed parameters are only using params address in
their entry point debug messages. With the new VIR_TYPED_PARAMS_DEBUG
macro, all functions can easily log all individual typed parameters
passed to them.
Add <features> and <compat> elements to volume target XML.
<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.
<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
Add new CPU features for HyperV:
vapic for virtual APIC support
spinlocks for setting spinlock support
<features>
<hyperv>
<vapic state='on'/>
<spinlocks state='on' retries='4096'/>
</hyperv>
</features>
https://bugzilla.redhat.com/show_bug.cgi?id=784836
This attribute is going to represent number of queues for
multique vhost network interface. This commit implements XML
extension part of the feature and add one test as well. For now,
we can only do xml2xml test as qemu command line generation code
is not adapted yet.
-vnc :5900,share=allow-exclusive
allows clients to ask for exclusive access which is
implemented by dropping other connections Connecting
multiple clients in parallel requires all clients asking
for a shared session (vncviewer: -shared switch)
-vnc :5900,share=force-shared
disables exclusive client access. Useful for shared
desktop sessions, where you don't want someone forgetting
specify -shared disconnect everybody else.
-vnc :5900,share=ignore
completely ignores the shared flag and allows everybody
connect unconditionally
QEMU might support more values for "-drive discard", so using Bi-state
values (on/off) for it doesn't make sense.
"on" maps to "unmap", "off" maps to "ignore":
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
The following XML configuration can be used to request all domain's
memory pages to be kept locked in host's memory (i.e., domain's memory
pages will not be swapped out):
<memoryBacking>
<locked/>
</memoryBacking>
Change the build process & driver initialization so that the
VirtualBox driver is built into libvirtd, instead of libvirt.so
This change avoids the VirtualBox GPLv2-only license causing
compatibility problems with libvirt.so which is under the
GPLv2-or-later license.
NB this change prevents use of the VirtualBox driver on the
Windows platform, until such time as libvirtd can be made
to work there.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the LXC driver documentation to describe the way
containers are setup by default. Also describe the common
virsh commands for managing containers and a little about
the security. Placeholders for docs about configuring
containers still to be filled in.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
QEMU introduced "discard" option for drive since commit a9384aff53,
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
This patch exposes the support in libvirt.
QEMU supported "discard" for "-drive" since v1.5.0-rc0:
% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1
So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
Adding support for new attribute 'websocket' in the '<graphics>'
element, the attribute value is the port to listen on with '-1'
meaning auto-allocation, '0' meaning no websockets.
QEMU introduced command line "-mem-merge=on|off" (defaults to on) to
enable/disable the memory merge (KSM) at guest startup. This exposes
it by new XML:
<memoryBacking>
<nosharepages/>
</memoryBacking>
The XML tag is same with what we used internally for old RHEL.
network: static route support for <network>
This patch adds the <route> subelement of <network> to define a static
route. the address and prefix (or netmask) attribute identify the
destination network, and the gateway attribute specifies the next hop
address (which must be directly reachable from the containing
<network>) which is to receive the packets destined for
"address/(prefix|netmask)".
These attributes are translated into an "ip route add" command that is
executed when the network is started. The command used is of the
following form:
ip route add <address>/<prefix> via <gateway> \
dev <virbr-bridge> proto static metric <metric>
Tests are done to validate that the input data are correct. For
example, for a static route ip definition, the address must be a
network address and not a host address. Additional checks are added
to ensure that the specified gateway is directly reachable via this
network (i.e. that the gateway IP address is in the same subnet as one
of the IP's defined for the network).
prefix='0' is supported for both family='ipv4' address='0.0.0.0'
netmask='0.0.0.0' or prefix='0', and for family='ipv6' address='::',
prefix=0', although care should be taken to not override a desired
system default route.
Anytime an attempt is made to define a static route which *exactly*
duplicates an existing static route (for example, address=::,
prefix=0, metric=1), the following error message will be sent to
syslog:
RTNETLINK answers: File exists
This can be overridden by decreasing the metric value for the route
that should be preferred, or increasing the metric for the route that
shouldn't be preferred (and is thus in place only in anticipation that
the preferred route may be removed in the future). Caution should be
used when manipulating route metrics, especially for a default route.
Note: The use of the command-line interface should be replaced by
direct use of libnl so that error conditions can be handled better. But,
that is being left as an exercise for another day.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
The <filesystem> element can now accept a <driver type='nbd'/>
as an alternative to 'loop'. The benefit of NBD is support
for non-raw disk image formats.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the <driver> element in filesystem devices to
allow a storage format to be set. The new attribute
uses 'format' to reflect the storage format. This is
different from the <driver> element in disk devices
which use 'type' to reflect the storage format. This
is because the 'type' attribute on filesystem devices
is already used for the driver backend, for which the
disk devices use the 'name' attribute. Arggggh.
Anyway for disks we have
<driver name="qemu" type="raw"/>
And for filesystems this change means we now have
<driver type="loop" format="raw"/>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Describe the new cgroups layout, how to customize placement
of guests and what virsh commands are used to access the
parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
An example of the scsi hostdev XML:
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='0' unit='0'/>
</source>
<address type='drive' controller='0' bus='0' target='4' unit='8'/>
</hostdev>
Controller is implicitly added for scsi hostdev, though the scsi
controller's model defaults to "lsilogic", which might be not what
the user wants (same problem exists for virtio-scsi disk). It's
the existing problem, will be addressed later.
The device address must be specified manually. Later patch will let
libvirt generate it automatically.
This only introduces the generic XMLs for scsi hostdev, later patches
will add other elements, e.g. <readonly>, <shareable>.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
While reviewing proposed VIR_STRDUP conversions, I've already noticed
several places that do:
if (str && VIR_STRDUP(dest, str) < 0)
which can be simplified by allowing str to be NULL (something that
strdup() doesn't allow). Meanwhile, code that wants to ensure a
non-NULL dest regardless of the source can check for <= 0.
Also, make it part of the VIR_STRDUP contract that macro arguments
are evaluated exactly once.
* src/util/virstring.h (VIR_STRDUP, VIR_STRDUP_QUIET, VIR_STRNDUP)
(VIR_STRNDUP_QUIET): Improve contract.
* src/util/virstring.c (virStrdup, virStrndup): Change return
conventions.
* docs/hacking.html.in: Document this.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
VIR_APPEND_ELEMENT(array, size, elem) was not safe if the expression
for 'size' had side effects. While no one in the current code base
was trying to pass side effects, we might as well be robust and
explicitly document our intentions.
* src/util/viralloc.c (virInsertElementsN): Add special case.
* src/util/viralloc.h (VIR_APPEND_ELEMENT): Use it.
(VIR_ALLOC, VIR_ALLOC_N, VIR_REALLOC_N, VIR_EXPAND_N)
(VIR_RESIZE_N, VIR_SHRINK_N, VIR_INSERT_ELEMENT)
(VIR_DELETE_ELEMENT, VIR_ALLOC_VAR, VIR_FREE): Document
which macros are safe in the presence of side effects.
* docs/hacking.html.in: Document this.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
If no todo.cfg is present, make sure the stub is in HTML5
format and clearly states that the config was not available
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The Windows port page currently links to pre-built libvirt
DLLs for release 0.8.8 which are 2 years old now. Until we
can reliably produce official Windows installers, point
people to the virt-viewer MSI installers instead which
include the libvirt DLLs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The XSL for generating the API docs was missing the HTML5
namespace declarations. The todo and hvsupport scripts were
also missing the HTML5 doctype / namespace declaration.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code adaptation is not done right now, but in subsequent patches.
Hence I am not implementing syntax-check rule as it would break
compilation. Developers are strongly advised to use these new macros.
They are similar to VIR_ALLOC() logic: VIR_STRDUP(dst, src) returns zero
on success, -1 otherwise. In case you don't want to report OOM error,
use the _QUIET variant of a macro.
Add missing 'html:' namespace prefix to a few more XSL
rules for generating the table of contents links
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previous commit failed to update the XSL to take account
of fact that in XHTML mode the elements need namespace
prefixes. This caused every web page to be blank!
The rule generating the HTML docs passing the --html flag
to xsltproc. This makes it use the legacy HTML parser, which
either ignores or tries to fix all sorts of broken XML tags.
There's no reason why we should be writing broken XML in
the first place, so removing --html and adding the XHTML
doctype to all files forces us to create good XML.
This adds the XHTML doc type and fixes many, many XML tag
problems it exposes.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It's not desired to force users imagine path for a socket they
are not even supposed to connect to. On the other hand, we
already have a release where the qemu agent socket path is
exposed to XML, so we cannot silently drop it from there.
The new path is generated in form:
$LOCALSTATEDIR/lib/libvirt/qemu/channel/target/$domain.$name
for qemu system mode, and
$XDG_CONFIG_HOME/qemu/lib/channel/target/$domain.$name
for qemu session mode.
Commit cc6d19f3 added text containing "<code>snapshot<code>" to
formatsnapshot.html.in. The closing tag is missing '/' which causes
the documentation to misrender.
A domain's <interface> or <hostdev>, as well as a <network>'s
<forward>, can now have an optional <driver name='kvm|vfio'/>
element. As of this patch, there is no functionality behind this new
knob - this patch adds support to the domain and network
formatter/parser, and to the RNG and documentation.
When the backend is added, legacy KVM PCI device assignment will
continue to be used when no driver name is specified (or if <driver
name='kvm'/> is specified), but if driver name is 'vfio', the new UEFI
Secure Boot compatible VFIO device assignment will be used.
Note that the parser doesn't automatically insert the current default
value of this setting. This is done on purpose because the two
possibilities are functionally equivalent from the guest's point of
view, and we want to be able to automatically start using vfio as the
default (even for existing domains) at some time in the future. This
is similar to what was done with the "vhost" driver option in
<interface>.
For pSeries guest in QEMU, NVRAM is one kind of spapr-vio device.
Users are allowed to specify spapr-vio devices'address.
But NVRAM is not supported in libvirt. So this patch is to
add NVRAM device to allow users to specify its address.
In QEMU, NVRAM device's address is specified by
"-global spapr-nvram.reg=xxxxx".
In libvirt, XML file is defined as the following:
<nvram>
<address type='spapr-vio' reg='0x3000'/>
</nvram>
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Instead of making a choice between the underscore and camelCase, this
simply changes "num_queues" into "queues", which is also consistent
with Michal's multiple queue support for interface.
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the virDrvXXX method names exactly match
the public APIs virYYY method names. ie XXX == YYY.
Add a test case to prevent any regressions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
http://www.uhv.edu/ac/newsletters/writing/grammartip2009.07.01.htm
(and several other sites) give hints that 'onto' is best used if
you can also add 'up' just before it and still make sense. In many
cases in the code base, we really want the two-word form, or even
a simplification to just 'on' or 'to'.
* docs/hacking.html.in: Use correct 'on to'.
* python/libvirt-override.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* src/util/virpci.c: Likewise.
* daemon/THREADS.txt: Use simpler 'on'.
* docs/formatdomain.html.in: Better usage.
* docs/internals/rpc.html.in: Likewise.
* src/conf/domain_event.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* tests/qemumonitortestutils.c: Likewise.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
The rng schema for <controller> had been non-specific about which
types of controllers allowed which models, and also allowed the
num_queues attribute (since that hasn't been released yet, should we
rename it to "numQueues"?) and <master> subelement to be included for
any controller type. In reality, half of the models are allowed only
for type='scsi', and the other half only for type='usb', num_queues is
allowed only for type='scsi', and <master> only for type='usb'.
This patch makes a separate <group> for type='scsi' and type='usb',
with each group allowing only the appropriate model values, and
allowing num_queue and <master> only when appropriate.
<interleave> also hadn't been specified, forcing a specific order of
subelements, which should never be done. (Note that the <interleave>
had to surround the main element attributes that are in the <group>
subelements, due to one of the <group>s containing a subelement).
The recent qemu requires "0x" prefix for the disk wwn, this patch
changes virValidateWWN to allow the prefix, and prepend "0x" if
it's not specified. E.g.
qemu-kvm: -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,\
drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,wwn=6000c60016ea71ad:
Property 'scsi-hd.wwn' doesn't take value '6000c60016ea71ad'
Though it's a qemu regression, but it's nice to allow the prefix,
and doesn't hurt for us to always output "0x".
Allow VMs to be placed into resource groups using the
following syntax
<resource>
<partition>/virtualmachines/production</partition>
</resource>
A resource cgroup will be backed by some hypervisor specific
functionality, such as cgroups with KVM/LXC.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Kerberos uses 'primary' or 'key' files (principals), not 'abstract
ideal' or 'rule' files (principles). Reported by Jason Meinzer.
Reflow a paragraph to fit in 80 columns in the process.
* docs/auth.html.in: Fix spelling.
The definiton of scsi adapter in storagespool.rng (sourceinfoadapter)
can be used by scsi hostdev in later patch. Move it to basictypes.rng.
PortNumber is defined in both domaincommon.rng and storagespool.rng,
simplify it by moving it to basictypes.rng.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
This updates the definitions and supporting structures in the XML
schema and domain configuration files.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
With this patch, one can specify the disk source using libvirt
storage like:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source pool='default' volume='fc18.img'/>
<target dev='vdb' bus='virtio'/>
</disk>
"seclabels" and "startupPolicy" are not supported for this new
disk type ("volume"). They will be supported in later patches.
docs/formatdomain.html.in:
* Add documents for new XMLs
docs/schemas/domaincommon.rng:
* Add rng for new XMLs;
src/conf/domain_conf.h:
* New struct for 'volume' type disk source (virDomainDiskSourcePoolDef)
* Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType
src/conf/domain_conf.c:
* New helper virDomainDiskSourcePoolDefParse to parse the 'volume'
type disk source.
* New helper virDomainDiskSourcePoolDefFree to free the source def
if 'volume' type disk.
tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
tests/qemuxml2xmltest.c:
* New test
node device driver names the HBA like "scsi_host5", but storage
driver uses "host5", which could make the user confused. This
changes them to be consistent. However, for back-compat reason,
adapter name like "host5" is still supported.
This introduces 4 new attributes for storage pool source adapter.
E.g.
<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.
* docs/formatstorage.html.in:
- Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
- Add RNG schema
* src/conf/storage_conf.c:
- Parse and format the new XMLs
* src/conf/storage_conf.h:
- New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
- New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
- Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
- Replace "adapter" with "adapter.data.name", which is member of the union
of the new struct virStoragePoolSourceAdapter now. Later patch will
add the checking, as "adapter.data.name" is only valid for "scsi_host"
adapter.
* src/storage/storage_backend_scsi.c:
- Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
- New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
- Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
- New test
* tests/storagepoolxml2xmltest.c:
- Include the test
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
Split the "resource" define out into multiple smaller
defines, one for each type of resource tuning parameter.
This makes the schema a bit clearer to read
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virsh(1) man page wasn't saying anything about the 'migrateuri'
parameter other than it can be usually omitted. A patched version of
docs/migrate.html.in is taken in this patch to fix that up in the man
page.
This enrichs HBA's xml by dumping the number of max vports and
vports in use. Format is like:
<capability type='vport_ops'>
<max_vports>164</max_vports>
<vports>5</vports>
</capability>
* docs/formatnode.html.in: (Document the new XML)
* docs/schemas/nodedev.rng: (Add the schema)
* src/conf/node_device_conf.h: (New member for data.scsi_host)
* src/node_device/node_device_linux_sysfs.c: (Collect the value of
max_vports and vports)
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only sheepdog actually required it in the code, and we can use 7000 as the
default---the same value that QEMU uses for the simple "sheepdog:VOLUME"
syntax. With this change, the schema can be fixed to allow no port.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libiscsi provides a userspace iSCSI initiator.
The main advantage over the kernel initiator is that it is very
easy to provide different initiator names for VMs on the same host.
Thus libiscsi supports usage of persistent reservations in the VM,
which otherwise would only be possible with NPIV.
libiscsi uses "iscsi" as the scheme, not "iscsi+tcp". We can change
this in the tests (while remaining backwards-compatible manner, because
QEMU uses TCP as the default transport for both Gluster and NBD).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'trang' utility, which is able to transform '.rng' files into
'.rnc' files, reported some errors in our schemas that weren't caught
by the tools we use in the build. I haven't added a test for this,
but the validity can be checked by the following command:
trang -I rng -O rnc domain.rng domain.rnc
There were unescaped minuses in regular expressions and we were
constraining int (which is by default in the range of [-2^31;2^31-1]
to maximum of 2^32. But what we wanted was exactly an unsignedInt.
This plumbs in the XML description of iSCSI shares. The next patches
will add support for the libiscsi userspace initiator.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The storage volume formats supported by the disk storage pool are
missing from the allowed values.
Add partition types.
Signed-off-by: Philipp Hahn <hahn@univention.de>
iSCSI qualified names (iqn) from RFC3721 may contain colons (':'), which
neither matches the absFilePath nor genericName:
$ virsh pool-dumpxml myiscsipool
<pool type='iscsi'>
...
<source>
...
<device path='iqn.2003-01.org.linux-iscsi.phahn-sid93.x8664:sn.8a3daa0d4efd'/>
</source>
...
</pool>
Add IscsiQualifiedName type and allow its use in sourceiscsi.
Signed-off-by: Philipp Hahn <hahn@univention.de>
This reuses the XML format that was introduced for Gluster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
These are supported by nbd-server and by the NBD server that QEMU
embeds for live image access.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Qemu's implementation of virtio RNG supports rate limiting of the
entropy used. This patch exposes the option to tune this functionality.
This patch is based on qemu commit 904d6f588063fb5ad2b61998acdf1e73fb4
The rate limiting is exported in the XML as:
<devices>
...
<rng model='virtio'>
<rate bytes='123' period='1234'/>
<backend model='random'/>
</rng>
...
The native bus for s390 I/O is called CCW (channel command word).
As QEMU has added basic support for the CCW bus, i.e. the
ability to assign CCW devnos (bus addresses) to devices.
Domains with the new machine type s390-ccw-virtio can use the
CCW bus. Currently QEMU will only allow to define virtio
devices on the CCW bus.
Here we add the new machine type and the new device address to the
schema definition and add a new paragraph to the domain XML
documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Sparse LVM volumes do not behave in the way one would naively expect.
The allocation does not automatically increase (which is different from
how sparse files work).
'virsh capabilities' will now include a new <memory> element
per <cell> of the topology, as in:
<topology>
<cells num='2'>
<cell id='0'>
<memory unit='KiB'>12572412</memory>
<cpus num='12'>
...
</cell>
Signed-off-by: Eric Blake <eblake@redhat.com>
There is some controversy[1] on the qemu list on whether qemu should
have ever allowed arbitrary file name passthrough, or whether it
should be restricted to JUST /dev/random and /dev/hwrng. It is
always easier to add support for additional filenames than it is
to remove support for something once released, so this patch
restricts libvirt 1.0.3 (where the virtio-random backend was first
supported) to just the two uncontroversial names, letting us defer
to a later date any decision on whether supporting arbitrary files
makes sense. Additionally, since qemu 1.4 does NOT support
/dev/fdset/nnn fd passthrough for the backend, limiting to just
two known names means that we don't get tempted to try fd
passthrough where it won't work.
[1]https://lists.gnu.org/archive/html/qemu-devel/2013-03/threads.html#00023
* src/conf/domain_conf.c (virDomainRNGDefParseXML): Only allow
/dev/random and /dev/hwrng.
* docs/schemas/domaincommon.rng: Flag invalid files.
* docs/formatdomain.html.in (elementsRng): Document this.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.args:
Update test to match.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.xml:
Likewise.
This reverts commit 383ebc4694.
We decided the xml for this feature needed more thought to make sure
we are doing it the best way, in particular wrt option values that
have multiple items.
Add qed for dirfs pool.
Add ocfs2 for disk pool.
Add lvm2 for disk and logical pool.
Add cifs and glusterfs for netfs pool.
Note: POOL_DISK_LVM2 can not be created by "parted mklabel", but is only
returned from auto-detection on disk pools.
Signed-off-by: Philipp Hahn <hahn@univention.de>
This reverts commit 24aa7f8d11.
The implementation to match the documentation is not complete yet,
and the final design might change the name of the 'schid' attribute.
virStrToLong(..., 8, ...) already requires the mode to be octal.
Change the relax-ng schema to check for octal as well.
Signed-off-by: Philipp Hahn <hahn@univention.de>
This patch documents XML elements used for (basic) support of virtual
RNG devices.
In the devices section in the domain XML users may specify:
For the default 'random' backend:
<devices>
<rng model='virtio'>
<backend model='random'>/dev/urandom</backend>
</rng>
</devices>
For the slightly more advanced EGD backend:
<devices>
<rng model='virtio'>
<backend model='egd' type='udp'>
<!-- this is a definition of a character device -->
<source mode='bind' service='1234'/>
<source mode='connect' host='1.2.3.4' service='1234'/>
<!-- or other valid character device configuration -->
</backend>
</rng>
</devices>
For the planned random daemon/pool:
<devices>
<rng model='virtio'>
<backend model='pool' pool='poolname'>class</backend>
</rng>
</devices>
to enable the RNG device for guests.
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address. Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used. According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.
Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.
Documentation and schemas have been updated.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
Although in IPv4 one must pick either mac or name, either
can be omitted. Similarly, for IPv6, the name
can be optionally omitted.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
This patch adds support for a new <option>-Tag in the <dhcp> block of
network configs, based on a subset of the fifth proposal by Laine
Stump in the mailing list discussion at
https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html.
Any such defined option will result in a dhcp-option=<number>,"<value>"
statement in the generated dnsmasq configuration file.
Currently, DHCP options can be specified by number only and there is
no whitelisting or blacklisting of option numbers, which should
probably be added.
Signed-off-by: Pieter Hollants <pieter@hollants.com>
Signed-off-by: Laine Stump <laine@laine.org>
Let users set the port range to be used for forward mode NAT:
...
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
...
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
Support setting which public ip to use for NAT via attribute
address in subelement <nat> in <forward>:
...
<forward mode='nat'>
<address start='1.2.3.4' end='1.2.3.10'/>
</forward>
...
This will construct an iptables line using:
'-j SNAT --to-source <start>-<end>'
instead of:
'-j MASQUERADE'
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
The native bus for s390 I/O is called CCW (channel command word).
As QEMU has added basic support for the CCW bus, i.e. the
ability to assign CCW devnos (bus addresses) to devices.
Domains with the new machine type s390-ccw-virtio can use the
CCW bus. Currently QEMU will only allow to define virtio
devices on the CCW bus.
Here we add the new machine type and the new device address to the
schema definition and add a new paragraph to the domain XML
documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
hacking: Add some text around the running of Valgrind along with example
output for "real" vs. "false positives".
cfg.mk: Add hacking.in.html to sc_prohibit_raw_allocation
Commit 6094ad7b (0.9.3 release) promoted several functions from
internal to public, but forgot to fix the documentation generator
to provide details about those functions.
For an example of what this fixes, look at:
file:///path/to/libvirt/docs/html/libvirt-libvirt.html#virEventAddHandle
before and after the patch.
* docs/apibuild.py (ignored_functions): Don't ignore functions
that were turned into official API.
* src/util/virevent.c: Fix comments to pass through parser.
When an exception happened inside the try clause in serialize_function,
a new exception was raised in the except clause subsequently:
Traceback (most recent call last):
File "./apibuild.py", line 2529, in <module>
rebuild("libvirt")
File "./apibuild.py", line 2513, in rebuild
builder.serialize()
File "./apibuild.py", line 2467, in serialize
self.serialize_function(output, function)
File "./apibuild.py", line 2208, in serialize_function
self.warning("Failed to save function %s info: " % name, `id.info`)
TypeError: warning() takes exactly 2 arguments (3 given)
Use the correct number of arguments for self.warning and print the
original exception to stderr.
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to qemu.
Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Acked-by: Osier Yang <jyang@redhat.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
This patch adds RNG schemas for adding more information in the topology
output of the NUMA section in the capabilities XML.
The added elements are designed to provide more information about the
placement and topology of the processors in the system to management
applications.
A demonstration of supported XML added by this patch:
<capabilities>
<host>
<topology>
<cells num='3'>
<cell id='0'>
<cpus num='4'> <!-- this is node with Hyperthreading -->
<cpu id='0' socket_id='0' core_id='0' siblings='0-1'/>
<cpu id='1' socket_id='0' core_id='0' siblings='0-1'/>
<cpu id='2' socket_id='0' core_id='1' siblings='2-3'/>
<cpu id='3' socket_id='0' core_id='1' siblings='2-3'/>
</cpus>
</cell>
<cell id='1'>
<cpus num='4'> <!-- this is node with modules (Bulldozer) -->
<cpu id='4' socket_id='0' core_id='2' siblings='4-5'/>
<cpu id='5' socket_id='0' core_id='3' siblings='4-5'/>
<cpu id='6' socket_id='0' core_id='4' siblings='6-7'/>
<cpu id='7' socket_id='0' core_id='5' siblings='6-7'/>
</cpus>
</cell>
<cell id='2'>
<cpus num='4'> <!-- this is a normal multi-core node -->
<cpu id='8' socket_id='1' core_id='0' siblings='8'/>
<cpu id='9' socket_id='1' core_id='1' siblings='9'/>
<cpu id='10' socket_id='1' core_id='2' siblings='10'/>
<cpu id='11' socket_id='1' core_id='3' siblings='11'/>
</cpus>
</cell>
</cells>
</topology>
</host>
</capabilities>
The socket_id field represents identification of the physical socket the
CPU is plugged in. This ID may not be identical to the physical socket
ID reported by the kernel.
The core_id identifies a core within a socket. Also this field may not
accurately represent physical ID's.
The core_id is guaranteed to be unique within a cell and a socket. There
may be duplicates between sockets. Only cores sharing core_id within one
cell and one socket can be considered as threads. Cores sharing core_id
within sparate cells are distinct cores.
The siblings field is a list of CPU id's the cpu id's the CPU is sibling
with - thus a thread. The list is in the cpuset format.
Adds a "ram" attribute globally to the video.model element, that changes
the resulting qemu command line only if video.type == "qxl".
<video>
<model type='qxl' ram='65536' vram='65536' heads='1'/>
</video>
That attribute gets a default value of 64*1024. The schema is unchanged
for other video element types.
The resulting qemu command line change is the addition of
-global qxl-vga.ram_size=<ram>*1024
or
-global qxl.ram_size=<ram>*1024
For the main and secondary qxl devices respectively.
The default for the qxl ram bar is 64*1024 kilobytes (the same as the
default qxl vram bar size).
Use of <tt> is discouraged in HTML 4.x and has finally been obsoleted
in HTML 5. Likewise for the <i> tag.
Using tables for layout is (widely) considered bad style, too.
Use defintion lists, definition term and defintion description
elements instead.
Signed-off-by: Claudio Bley <cbley@av-test.de>
In CSS the following class names are available:
* keyword (keywords like "typedef", "struct")
* type (types like "int", "void*")
* comment (comments after members of enums or structs)
* directive (preprocessor directives, #define)
* undisclosed (text saying that the API is not public)
Additionally, kill all of the left-over "programlisting" class
assignments. There are no CSS rules for them.
Signed-off-by: Claudio Bley <cbley@av-test.de>
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.
The actual APIs are
int virDomainLxcOpenNamespace(virDomainPtr domain,
int **fdlist,
unsigned int flags);
int virDomainLxcEnterNamespace(virDomainPtr domain,
unsigned int nfdlist,
int *fdlist,
unsigned int *noldfdlist,
int **oldfdlist,
unsigned int flags);
which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.
NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When parsing the top level comment of a file, apibuild.py used
to split on any ':' character of a line regarding the first part
as a key for a setting, e.g. "Summary". The second part would then
be assigned as the value for that key.
This means you could not use a ':' character inside those comments
without ill effects.
Now, a key must consist solely of alphanumeric characters, '_' or '.'.
I've noticed a number of people sending patches with file
renames not compressed, so we might as well document how to
set this up. (Git won't do it by default, for back-compat
reasons)
* docs/hacking.html.in: Add git config tip.
* HACKING: Regenerate.
Add an optional 'type' attribute to <target> element of serial port
device. There are two choices for its value, 'isa-serial' and
'usb-serial'. For backward compatibility, when attribute 'type' is
missing the 'isa-serial' will be chosen as before.
Libvirt XML sample
<serial type='pty'>
<target type='usb-serial' port='0'/>
<address type='usb' bus='0' port='1'/>
</serial>
qemu commandline:
qemu ${other_vm_args} \
-chardev pty,id=charserial0 \
-device usb-serial,chardev=charserial0,id=serial0,bus=usb.0,port=1
Libvirt's HTML documentation is not as easy to the eyes as it could
be since long text has no visual breaks.
Take advantage of the formatting in documentation comments and wrap
each part separated by two consecutive \n into a HTML <p> element.
The SCLP console is the native console type for s390 and is preferred
over the virtio console as it doesn't require special drivers and
is more efficient. Recent versions of QEMU come with SCLP support
which is hereby enabled.
The new target types 'sclp' and 'sclplm' can be used to specify a
SCLP console. Adding documentation, domain schema and XML processing
support.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This introduces new XML tag "sgio" for disk, its valid values
are "filtered" and "unfiltered", setting it as "filtered" will
set the disk's unpriv_sgio to 0, and "unfiltered" to set it
as 1, which allows the unprivileged SG_IO commands.
The <hostdev> device type has long had a redundant "mode"
attribute, which has always been "subsys". This finally
introduces a new mode "capabilities", which will be used
by the LXC driver for device assignment. Since container
based virtualization uses a single kernel, the idea of
assigning physical PCI devices doesn't make sense. It is
still reasonable to assign USB devices, but for assigning
arbitrary nodes in /dev, the new 'capabilities' mode is
to be used.
The first capability support is 'storage', which is for
assignment of block devices. Functionally this is really
pretty similar to the <disk> support. The only difference
is the device node name is identical in both host and
container namespaces.
<hostdev mode='capabilities' type='storage'>
<source>
<block>/dev/sdf1</block>
</source>
</hostdev>
The second capability support is 'misc', which is for
assignment of character devices. There is no existing
parallel to this. Again the device node is the same
inside & outside the container.
<hostdev mode='capabilities' type='misc'>
<source>
<char>/dev/input/event3</char>
</source>
</hostdev>
The reason for keeping the char & storage devices
separate in the domain XML, is to mirror the split
in the node device XML. NB the node device XML does
not yet report character devices, but that's another
new patch to come
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If there are multiple video devices
primary = 'yes' marks this video device as the primary one.
The rest are secondary video devices. No more than one could be
mark as primary. If none of them has primary attribute, the first
one will be the primary by default like what it was.
The reason of this changing is that for qemu, only one primary video
device is permitted which can be of any type. For secondary video
devices, only qxl is allowd. Primary attribute removes the restriction
that the first have to be the primary one.
We always put the primary video device into the first position of
video device structure array after parsing.
This is however supported only on domain interfaces with
type='network'. Moreover, target network needs to have at least
inbound QoS set. This is required by hierarchical traffic shaping.
From now on, the required attribute for <inbound/> is either 'average'
(old) or 'floor' (new). This new attribute can be used just for
interfaces type of network (<interface type='network'/>) currently.
The DHCPv6 support includes IPV6 dhcp-range and dhcp-host for one
IPv6 subnetwork on one interface. This support will only work
if dnsmasq version >= 2.64; otherwise an error occurs if
dhcp-range or dhcp-host is specified for an IPv6 address.
Essentially, this change provides the same DHCP support for IPv6
that has been available for IPv4.
With dnsmasq >= 2.64, support for the RA service is also now provided
by dnsmasq (radvd is no longer used/started). (Although at least one
version of dnsmasq prior to 2.64 "supported" IPv6 Router
Advertisement, there were bugs (fixed in 2.64) that rendered it
unusable.)
Documentation and the network schema has been updated
to reflect the new support.
QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.
Based on a patch originally authored by Daniel De Graaf
http://lists.xen.org/archives/html/xen-devel/2012-05/msg00565.html
This patch converts the Xen libxl driver to support only Xen >= 4.2.
Support for Xen 4.1 libxl is dropped since that version of libxl is
designated 'technology preview' only and is incompatible with Xen 4.2
libxl. Additionally, the default toolstack in Xen 4.1 is still xend,
for which libvirt has a stable, functional driver.
This patch adds the capability for virtual guests to do IPv6
communication via a virtual network interface with no IPv6 (gateway)
addresses specified. This capability has always been enabled by
default for IPv4, but disabled for IPv6 for security concerns, and
because it requires the ip6tables command to be operational (which
isn't the case on a system with the ipv6 module completely disabled).
This patch adds a new attribute "ipv6" at the toplevel of a <network>
object. If ipv6='yes', the extra ip6tables rules required to permite
inter-guest communications are added when the network is started. If
it is 'no', or not present, those rules will not be added; thus the
default behavior doesn't change, so there should be no compatibility
issues with any existing installations.
Note that virtual guests cannot communication with the virtualization
host via this interface, because the following kernel tunable has
been set:
net.ipv6.conf.<bridge_interface_name>.disable_ipv6 = 1
This assures that the bridge interface will not have an IPv6
link-local (fe80::) address.
To control this behavior so that it is not enabled by default, the parameter
ipv6='yes' on the <network> statement has been added.
Documentation related to this patch has been updated.
The network schema has also been updated.
This patch introduces the RNG schema and updates necessary data strucutures
to allow various hypervisors to make use of Gluster protocol as one of the
supported network disk backend. Next patch will add support to make use of
this feature in Qemu since it now supports Gluster protocol as one of the
network based storage backend.
Two new optional attributes for <host> element are introduced - 'transport'
and 'socket'. Valid transport values are tcp, unix or rdma. If none specified,
tcp is assumed. If transport is unix, socket specifies path to unix socket.
This patch allows users to specify disks on gluster backends like this:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='gluster' name='Volume1/image'>
<host name='example.org' port='6000' transport='tcp'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='gluster' name='Volume2/image'>
<host transport='unix' socket='/path/to/sock'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Each <domainsnapshot> can now contain an optional <memory>
element that describes how the VM state was handled, similar
to disk snapshots. The new element will always appear in
output; for back-compat, an input that lacks the element will
assume 'no' or 'internal' according to the domain state.
Along with this change, it is now possible to pass <disks> in
the XML for an offline snapshot; this also needs to be wired up
in a future patch, to make it possible to choose internal vs.
external on a per-disk basis for each disk in an offline domain.
At that point, using the --disk-only flag for an offline domain
will be able to work.
For some examples below, remember that qemu supports the
following snapshot actions:
qemu-img: offline external and internal disk
savevm: online internal VM and disk
migrate: online external VM
transaction: online external disk
=====
<domainsnapshot>
<memory snapshot='no'/>
...
</domainsnapshot>
implies that there is no VM state saved (mandatory for
offline and disk-only snapshots, not possible otherwise);
using qemu-img for offline domains and transaction for online.
=====
<domainsnapshot>
<memory snapshot='internal'/>
...
</domainsnapshot>
state is saved inside one of the disks (as in qemu's 'savevm'
system checkpoint implementation). If needed in the future,
we can also add an attribute pointing out _which_ disk saved
the internal state; maybe disk='vda'.
=====
<domainsnapshot>
<memory snapshot='external' file='/path/to/state'/>
...
</domainsnapshot>
This is not wired up yet, but future patches will allow this to
control a combination of 'virsh save /path/to/state' plus disk
snapshots from the same point in time.
=====
So for 1.0.1 (and later, as needed), I plan to implement this table
of combinations, with '*' designating new code and '+' designating
existing code reached through new combinations of xml and/or the
existing DISK_ONLY flag:
domain memory disk disk-only | result
-----------------------------------------
offline omit omit any | memory=no disk=int, via qemu-img
offline no omit any |+memory=no disk=int, via qemu-img
offline omit/no no any | invalid combination (nothing to snapshot)
offline omit/no int any |+memory=no disk=int, via qemu-img
offline omit/no ext any |*memory=no disk=ext, via qemu-img
offline int/ext any any | invalid combination (no memory to save)
online omit omit off | memory=int disk=int, via savevm
online omit omit on | memory=no disk=default, via transaction
online omit no/ext off | unsupported for now
online omit no on | invalid combination (nothing to snapshot)
online omit ext on | memory=no disk=ext, via transaction
online omit int off |+memory=int disk=int, via savevm
online omit int on | unsupported for now
online no omit any |+memory=no disk=default, via transaction
online no no any | invalid combination (nothing to snapshot)
online no int any | unsupported for now
online no ext any |+memory=no disk=ext, via transaction
online int/ext any on | invalid combination (disk-only vs. memory)
online int omit off |+memory=int disk=int, via savevm
online int no/ext off | unsupported for now
online int int off |+memory=int disk=int, via savevm
online ext omit off |*memory=ext disk=default, via migrate+trans
online ext no off |+memory=ext disk=no, via migrate
online ext int off | unsupported for now
online ext ext off |*memory=ext disk=ext, via migrate+transaction
* docs/schemas/domainsnapshot.rng (memory): New RNG element.
* docs/formatsnapshot.html.in: Document it.
* src/conf/snapshot_conf.h (virDomainSnapshotDef): New fields.
* src/conf/domain_conf.c (virDomainSnapshotDefFree)
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Manage new fields.
* tests/domainsnapshotxml2xmltest.c: New test.
* tests/domainsnapshotxml2xmlin/*.xml: Update existing tests.
* tests/domainsnapshotxml2xmlout/*.xml: Likewise.
This documents the following whitespace rules
if(foo) // Bad
if (foo) // Good
int foo (int wizz) // Bad
int foo(int wizz) // Good
bar = foo (wizz); // Bad
bar = foo(wizz); // Good
typedef int (*foo) (int wizz); // Bad
typedef int (*foo)(int wizz); // Good
int foo( int wizz ); // Bad
int foo(int wizz); // Good
There is a syntax-check rule extension to validate all these rules.
Checking for 'function (...args...)' is quite difficult since it
needs to ignore valid usage with keywords like 'if (...test...)'
and while/for/switch. It must also ignore source comments and
quoted strings.
It is not possible todo this with a simple regex in the normal
syntax-check style. So a short Perl script is created instead
to analyse the source. In practice this works well enough. The
only thing it can't cope with is multi-line quoted strings of
the form
"start of string\
more lines\
more line\
the end"
but this can and should be written as
"start of string"
"more lines"
"more line"
"the end"
with this simple change, the bracket checking script does not
have any false positives across libvirt source, provided it
is only run against .c files. It is not practical to run it
against .h files, since those use whitespace extensively to
get alignment (though this is somewhat inconsistent and could
arguably be fixed).
The only limitation is that it cannot detect a violation where
the first arg starts with a '*', eg
foo(*wizz);
since this generates too many false positives on function
typedefs which can't be supressed efficiently.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* configure.ac docs/news.html.in libvirt.spec.in: update for the new release
* po/*.po*: update from transifex, a lot of added support e.g. Indian
languages, and regenerate
Also remove warnings for upcoming versions. There hadn't been any
compatibility problems with new ESX version over the whole lifetime
of the ESX driver, so I don't expect any in the future.
Update documentation to mention vSphere 5.x support.
On F17 at least, every time libvirtd starts we get this in syslog:
libvirtd: Could not find keytab file: /etc/libvirt/krb5.tab: No such file or directory
This comes from cyrus-sasl, and happens regardless of whether the
gssapi plugin is requested, which is what actually uses
/etc/libvirt/krb5.tab.
While cyrus-sasl shouldn't complain, we can easily make it shut up by
commenting out the keytab value by default.
Also update the keytab comment to the more modern one from qemu's
sasl config file.
At one point, the code passed through arbitrary strings for file
formats, which supposedly lets qemu handle a new file type even
before libvirt has been taught to handle it. However, to properly
label files, libvirt has to learn the file type anyway, so we
might as well make our life easier by only accepting file types
that we are prepared to handle. This patch lets the RNG validation
ensure that only known strings are let through.
* docs/schemas/domaincommon.rng (driverFormat): Limit to list of
supported strings.
* docs/schemas/domainsnapshot.rng (driver): Likewise.
Hypervisors are starting to support HyperV Enlightenment features that
improve behavior of guests running Microsoft Windows operating systems.
This patch adds support for the "relaxed" feature that improves timer
behavior and also establishes a framework to add these features in
future.
Given Daniel's announcement[1], code targetting the next release will
be in 1.0.0, not 0.10.3. Changed mechanically with:
for f in $(git grep -l '0\(.\)10\13\b') ; do
sed -i -e 's/0\(.\)10\13/1\10\10/g' $f
done
[1]https://www.redhat.com/archives/libvir-list/2012-October/msg00403.html
* docs/formatdomain.html.in: Use 1.0.0 for next release.
* src/interface/interface_backend_udev.c: Likewise.
These 3 elements conflicts with each other in either the doc
or the underlying codes.
Current problems:
Problem 1:
The doc shouldn't simply say "These settings are superseded
by CPU tuning. " for element <vcpu>. As except the tuning, <vcpu>
allows to specify the current, maxmum vcpu number. Apart from that,
<vcpu> also allows to specify the placement as "auto", which binds
the domain process to the advisory nodeset from numad.
Problem 2:
Doc for <vcpu> says its "cpuset" specify the physical CPUs
that the vcpus can be pinned. But it's not the truth, as
actually it only pin domain process to the specified physical
CPUs. So either it's a document bug, or code bug.
Problem 3:
Doc for <vcpupin> says it supersed "cpuset" of <vcpu>, it's
not quite correct, as each <vcpupin> specify the pinning policy
only for one vcpu. How about the ones which doesn't have
<vcpupin> specified? it says the vcpu will be pinned to all
available physical CPUs, but what's the meaning of attribute
"cpuset" of <vcpu> then?
Problem 4:
Doc for <emulatorpin> says it pin the emulator threads (domain
process in other context, perhaps another follow up patch to
cleanup the inconsistency is needed) to the physical CPUs
specified its attribute "cpuset". Which conflicts with
<vcpu>'s "cpuset". And actually in the underlying codes,
it set the affinity for domain process twice if both
"cpuset" for <vcpu> and <emulatorpin> are specified,
and <emulatorpin>'s pinning will override <vcpu>'s.
Problem 5:
When "placement" of <vcpu> is "auto" (I.e. uses numad to
get the advisory nodeset to which the domain process is
pinned to), it will also be overridden by <emulatorpin>,
This patch is trying to sort out the conflicts or bugs by:
1) Don't say <vcpu> is superseded by <cputune>
2) Keep the semanteme for "cpuset" of <vcpu> (I.e. Still says it
specify the physical CPUs the virtual CPUs). But modifying it
to mention it also set the pinning policy for domain process,
and the CPU placement of domain process specified by "cpuset"
of <vcpu> will be ingored if <emulatorpin> specified, and
similary, the CPU placement of vcpu thread will be ignored
if it has <vcpupin> specified, for vcpu which doesn't have
<vcpupin> specified, it inherits "cpuset" of <vcpu>.
3) Don't say <vcpu> is supersed by <vcpupin>. If neither <vcpupin>
nor "cpuset" of <vcpu> is specified, the vcpu will be pinned
to all available pCPUs.
4) If neither <emulatorpin> nor "cpuset" of <vcpu> is specified,
the domain process (emulator threads in the context) will be
pinned to all available pCPUs.
5) If "placement" of <vcpu> is "auto", <emulatorpin> is not allowed.
6) hotplugged vcpus will also inherit "cpuset" of <vcpu>
Codes changes according to above document changes:
1) Inherit def->cpumask for each vcpu which doesn't have <vcpupin>
specified, during parsing.
2) ping the vcpu which doesn't have <vcpupin> specified to def->cpumask
either by cgroup for sched_setaffinity(2), which is actually done
by 1).
3) Error out if "placement" == "auto", and <emulatorpin> is specified.
Otherwise, <emulatorpin> is honored, and "cpuset" of <cpuset> is
ignored.
4) Setup cgroup for each hotplugged vcpu, and setup the pinning policy
by either cgroup or sched_setaffinity(2).
5) Remove cgroup and <vcpupin> for each hot unplugged vcpu.
Patches are following (6 in total except this patch)
When startupPolicy set for a USB devices allows such device to be
missing, there was no way this could be detected from domain XML. With
this patch, libvirt emits a new missing='yes' attribute for such devices
when active domain XML is generated.
USB devices can disappear without OS being mad about it, which makes
them ideal for startupPolicy. With this attribute, USB devices can be
configured to be mandatory (the default), requisite (will disappear
during migration if they cannot be found), or completely optional.
While the changes to sanlock driver should be stable, the actual
implementation of sanlock_helper is supposed to be replaced in the
future. However, before we can implement a better sanlock_helper, we
need an administrative interface to libvirtd so that the helper can just
pass a "leases lost" event to the particular libvirt driver and
everything else will be taken care of internally. This approach will
also allow libvirt to pass such event to applications and use
appropriate reasons when changing domain states.
The temporary implementation handles all actions directly by calling
appropriate libvirt APIs (which among other things means that it needs
to know the credentials required to connect to libvirtd).
While current on_{poweroff,reboot,crash} action configuration is about
configuring life cycle actions, they can all be considered events and
actions that need to be done on a particular event. Let's generalize the
code by renaming life cycle actions to event actions so that it can be
reused later for non-lifecycle events.
Use of the wrong attribute name caused the table of contents to
be useless. Fix suggested by Daniel P. Berrange.
* docs/migration.html.in: Use correct anchoring attribute.
Getting a artifact into Maven central has a lot of restrictions as
where the artifact should be hosted.
This seemed like a big hassle which we don't want to go through now.
Document a way for users to use libvirt.org as a repository so they can
fetch the Java bindings with maven.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This allows the user to control labelling of each character device
separately (the default is to inherit from the VM).
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Noticed this by reading the page. It would be so much nicer if our
tools could automatically flag things like this as part of 'make'.
* docs/formatdomain.html.in: Remove extra '>'.
This patch adds to relatedlinks.html a link to an article about libvirt
describing how the Linux audit subsystem can be used to track qemu
guest's life-cycle.
Sometimes when guest machine crashes, coredump can get huge due to the
guest memory. This can be limited using madvise(2) system call and is
being used in QEMU hypervisor. This patch adds an option for configuring
that in the domain XML and related documentation.
Whenever the guest machine fails to boot, new parameter (reboot-timeout)
controls whether it should reboot and after how many ms it should do so.
Docs included.
The introduction of APIC EOI patches had a few little details that
could look better, so this patch fixes that and one more place in the
file as well (same problem).
With this script you can run libvirt programs without needing to
install them first. You just have to do for example:
./run ./tools/virsh [args ...]
If you are already in the tools/ subdirectory, then the following
command will also work:
../run ./virsh [...]
You can also run the C programs under valgrind like this:
./run valgrind [valgrind opts...] ./program
or under gdb:
./run gdb --args ./program
This also works with sudo (eg. if you need root access for libvirt):
sudo ./run ./tools/virsh list --all
Derived from libguestfs and simplified. The ./run script in
libguestfs is much more sophisticated:
https://github.com/libguestfs/libguestfs/blob/master/run.in
A block commit moves data in the opposite direction of block pull.
Block pull reduces the chain length by dropping backing files after
data has been pulled into the top overlay, and is always safe; block
commit reduces the chain length by dropping overlays after data has
been committed into the backing file, and any files that depended
on base but not on top are invalidated at any point where they have
unallocated data that is now pointing to changed contents in base.
Both directions are useful, however: a qcow2 layer that is more than
50% allocated will typically be faster with a pull operation, while
a qcow2 layer with less than 50% allocation will be faster as a
commit operation. Committing across multiple layers can be more
efficient than repeatedly committing one layer at a time, but
requires extra support from the hypervisor.
This API matches Jeff Cody's proposed qemu command 'block-commit':
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02226.html
Jeff's command is still in the works for qemu 1.3, and may gain
further enhancements, such as the ability to control on-error
handling (it will be comparable to the error handling Paolo is
adding to 'drive-mirror', so a similar solution will be needed
when I finally propose virDomainBlockCopy with more functionality
than the basics supported by virDomainBlockRebase). However, even
without qemu support, this API will be useful for _offline_ block
commits, by wrapping qemu-img calls and turning them into a block
job, so this API is worth committing now.
For some examples of how this will be implemented, all starting
with the chain: base <- snap1 <- snap2 <- active
+ These are equivalent:
virDomainBlockCommit(dom, disk, NULL, NULL, 0, 0)
virDomainBlockCommit(dom, disk, NULL, "active", 0, 0)
virDomainBlockCommit(dom, disk, "base", NULL, 0, 0)
virDomainBlockCommit(dom, disk, "base", "active", 0, 0)
but cannot be implemented for online qemu with round 1 of
Jeff's patches; and for offline images, it would require
three back-to-back qemu-img invocations unless qemu-img
is patched to allow more efficient multi-layer commits;
the end result would be 'base' as the active disk with
contents from all three other files, where 'snap1' and
'snap2' are invalid right away, and 'active' is invalid
once any further changes to 'base' are made.
+ These are equivalent:
virDomainBlockCommit(dom, disk, "snap2", NULL, 0, 0)
virDomainBlockCommit(dom, disk, NULL, NULL, 0, _SHALLOW)
they cannot be implemented for online qemu, but for offline,
it is a matter of 'qemu-img commit active', so that 'snap2'
is now the active disk with contents formerly in 'active'.
+ Similarly:
virDomainBlockCommit(dom, disk, "snap2", NULL, 0, _DELETE)
for an offline domain will merge 'active' into 'snap2', then
delete 'active' to avoid leaving a potentially invalid file
around.
+ This version:
virDomainBlockCommit(dom, disk, NULL, "snap2", 0, _SHALLOW)
can be implemented online with 'block-commit' passing a base of
snap1 and a top of snap2; and can be implemented offline by
'qemu-img commit snap2' followed by 'qemu-img rebase -u
-b snap1 active'
* include/libvirt/libvirt.h.in (virDomainBlockCommit): New API.
* src/libvirt.c (virDomainBlockCommit): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.10.2): Export it.
* src/driver.h (virDrvDomainBlockCommit): New driver callback.
* docs/apibuild.py (CParser.parseSignature): Add exception.
New options is added to support EOI (End of Interrupt) exposure for
guests. As it makes sense only when APIC is enabled, I added this into
the <apic> element in <features> because this should be tri-state
option (cannot be handled as standalone feature).
Links to the FAQ didn't work on pages in subdirectories, like
devhelp/libvirt-virterror.html or internals/command.html, because
they have had href_base prepended to them.
An email came to libvir-list wondering why the git send-email command
was missing in spite of having git installed; this is due to the
send-email command being in a sub-package of the main git package.
While touching the hacking file, I thought it would be useful to 1)
indicate the location of the source (docs/hacking.html.in) in the
message at the top of HACKING, and also to make the note about running
"make check" and "make syntax-check" a bit more stern.
On a machine without xsltproc, the build failed with:
Scripting search.php
/usr/local/bin/bash: line 1: search.php.tmp: No such file or directory
rm: ./search.php: No such file or directory
Regression introduced in commit 28183590.
* docs/Makefile.am (%.php): Skip in the same conditions when the
.tmp file is skipped.
After discussion with DB we decided to rename the new iolimit
element as it creates the impression it would be there to
limit (i.e. throttle) I/O instead of specifying immutable
characteristics of a block device.
This is also backed by the fact that the term I/O Limits has
vanished from newer storage admin documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
There is a new <pm/> element implemented that can control what ACPI
sleeping states will be advertised by BIOS and allowed to be switched
to by libvirt. The default keeps defaults on hypervisor, otherwise
forces chosen setting.
The documentation of the pm element is added as well.
Introducing a new iolimits element allowing to override certain
properties of a guest block device like the physical and logical
block size.
This can be useful for platforms with 'non-standard' disk formats
like S390 DASD with its 4K block size.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This patch introduces support of setting emulator's period and
quota to limit cpu bandwidth when the vm starts. Also updates
XML Schema for new entries and docs.
This patch adds a new xml element <emulatorpin>, which is a sibling
to the existing <vcpupin> element under the <cputune>, to pin emulator
threads to specified physical CPUs.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
A hypervisor may allow to override the disk geometry of drives.
Qemu, as an example with cyls=,heads=,secs=[,trans=].
This patch extends the domain config to allow the specification of
disk geometry with libvirt.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This patch updates the domain and capability XML parser and formatter to
support more than one "seclabel" element for each domain and device. The
RNG schema and the tests related to this are also updated by this patch.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
This patch updates the network driver to properly utilize the new
attributes/elements that are now in virNetworkDef
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: Laine Stump <laine@laine.org>
This patch introduces the new forward mode='hostdev' along with
attribute managed. Includes updates to the network RNG and new xml
parser/formatter code.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
The following config elements now support a <vlan> subelements:
within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>
Each vlan element must have one or more <tag id='n'/> subelements. If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.
Some examples:
<interface type='hostdev'/>
<vlan>
<tag id='42'/>
</vlan>
<mac address='52:54:00:12:34:56'/>
...
</interface>
<network>
<name>vlan-net</name>
<vlan trunk='yes'>
<tag id='30'/>
</vlan>
<virtualport type='openvswitch'/>
</network>
<interface type='network'/>
<source network='vlan-net'/>
...
</interface>
<network>
<name>trunk-vlan</name>
<vlan>
<tag id='42'/>
<tag id='43'/>
</vlan>
...
</network>
<network>
<name>multi</name>
...
<portgroup name='production'/>
<vlan>
<tag id='42'/>
</vlan>
</portgroup>
<portgroup name='test'/>
<vlan>
<tag id='666'/>
</vlan>
</portgroup>
</network>
<interface type='network'/>
<source network='multi' portgroup='test'/>
...
</interface>
IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)
<portgroup> allows a <bandwidth> element, but the schema didn't have
this. Since this makes for multiple elements in portgroup, they must
be interleaved.
<interface type='bridge'> needs to allow <virtualport> elements
for openvswitch, but the schema didn't allow this.
Let's change URI to parallels:///system. Parallels Server supports
creating VMs from non-privileged accounts, but it's not main usage
scenario and it may be forbidden in the future.
Also containers, which will be supported by the driver, can be managed
only by root, so /system path is more suitable for this driver.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Following commit added suport the CPU quota/period to the LXC driver.
Update the documentation to reflect that.
commit d9724a81b3
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Nov 10 12:16:26 2011 +0000
Add support for CPU quota/period to LXC driver
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Just as each physical device used by a network has a connections
counter, now each network has a connections counter which is
incremented once for each guest interface that connects using this
network.
The count is output in the live network XML, like this:
<network connections='20'>
...
</network>
It is read-only, and for informational purposes only - it isn't used
internally anywhere by libvirt.
One of the original ideas behind allowing a <virtualport> in an
interface definition as well as in the <network> definition *and*one
or more <portgroup>s within the network, was that guest-specific
parameteres (like instanceid and interfaceid) could be given in the
interface's virtualport, and more general things (portid, managerid,
etc) could be given in the network and/or portgroup, with all the bits
brought together at guest startup time and combined into a single
virtualport to be used by the guest. This was somehow overlooked in
the implementation, though - it simply picks the "most specific"
virtualport, and uses the entire thing, with no attempt to merge in
details from the others.
This patch uses virNetDevVPortProfileMerge3() to combine the three
possible virtualports into one, then uses
virNetDevVPortProfileCheck*() to verify that the resulting virtualport
type is appropriate for the type of network, and that all the required
attributes for that type are present.
An example of usage is this: assuming a <network> definitions on host
ABC of:
<network>
<name>testA</name>
...
<virtualport type='openvswitch'/>
...
<portgroup name='engineering'>
<virtualport>
<parameters profileid='eng'/>
</virtualport>
</portgroup>
<portgroup name='sales'>
<virtualport>
<parameters profileid='sales'/>
</virtualport>
</portgroup>
</network>
and the same <network> on host DEF of:
<network>
<name>testA</name>
...
<virtualport type='802.1Qbg'>
<parameters typeid="1193047" typeidversion="2"/>
</virtualport>
...
<portgroup name='engineering'>
<virtualport>
<parameters managerid="11"/>
</virtualport>
</portgroup>
<portgroup name='sales'>
<virtualport>
<parameters managerid="55"/>
</virtualport>
</portgroup>
</network>
and a guest <interface> definition of:
<interface type='network'>
<source network='testA' portgroup='sales'/>
<virtualport>
<parameters instanceid="09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f"
interfaceid="09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f"\>
</virtualport>
...
</interface>
If the guest was started on host ABC, the <virtualport> used would be:
<virtualport type='openvswitch'>
<parameters interfaceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'
profileid='sales'/>
</virtualport>
but if that guest was started on host DEF, the <virtualport> would be:
<virtualport type='802.1Qbg'>
<parameters instanceid="09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f"
typeid="1193047" typeidversion="2"
managerid="55"/>
</virtualport>
Additionally, if none of the involved <virtualport>s had a specified type
(this includes cases where no virtualport is given at all),
Until now, all attributes in a <virtualport> parameter list that were
acceptable for a particular type, were also required. There were no
optional attributes.
One of the aims of supporting <virtualport> in libvirt's virtual
networks and portgroups is to allow specifying the group-wide
parameters in the network's virtualport, and merge that with the
interface's virtualport, which will have the instance-specific info
(i.e. the interfaceid or instanceid).
Additionally, the guest's interface XML shouldn't need to know what
type of network connection will be used prior to runtime - it could be
openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should
still be able to specify instance-specific info just in case it turns
out to be applicable.
Finally, up to now, the parser for virtualport has always generated a
random instanceid/interfaceid when appropriate, making it impossible
to leave it blank (which is what's required for virtualports within a
network/portprofile definition).
This patch modifies the parser and formatter of the <virtualport>
element in the following ways:
* because most of the attributes in a virNetDevVPortProfile are fixed
size binary data with no reserved values, there is no way to embed a
"this value wasn't specified" sentinel into the existing data. To
solve this problem, the new *_specified fields in the
virNetDevVPortProfile object that were added in a previous patch of
this series are now set when the corresponding attribute is present
during the parse.
* allow parsing/formatting a <virtualport> that has no type set. In
this case, all fields are settable, but all are also optional.
* add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is
set and an instanceid/interfaceid is expected but not provided, a
random one will be generated. This was previously the default
behavior, but is now done only for virtualports inside an
<interface> definition, not for those in <network> or <portgroup>.
* add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is
set the parser will call the new
virNetDevVPortProfileCheckComplete() functions at the end of the
parser to check for any missing attributes (based on type), and
return failure if anything is missing. This used to be default
behavior. Now it is only used for the virtualport defined inside an
interface's <actual> element (by the time you've figured out the
contents of <actual>, you should have all the necessary data to fill
in the entire virtualport)
* add a REQUIRE_TYPE flag to the parser - if this flag is set, the
parser will return an error if the virtualport has no type
attribute. This also was previously the default behavior, but isn't
needed in the case of the virtualport for a type='network' interface
(i.e. the exact type isn't yet known), or the virtualport of a
portgroup (i.e. the portgroup just has modifiers for the network's
virtualport, which *does* require a type) - in those cases, the
check will be done at domain startup, once the final virtualport is
assembled (this is handled in the next patch).
List:
- some old libvir/libvirt rename leftovers (the only problem can be
if somebody parses 'virsh version' output really badly)
- remove pointless tags specified in some pages that are not used
This patch makes search.php autogenerated from search.php.in, thus
removing hardcoded menus, footer etc. and the search.php is added to
.gitignore.
There is new rule added for *.php files (to make it bit less
hardcoded) that takes *.php.code.in and injects it inside the
generated *.php (xslt was not happy about php code in the source xml).
Error 404 page had relative paths specified for both the image and
stylesheets which caused a problem when requested URL included a
subfolder (e.g. http://libvirt.org/asdf/asdf ). This patch corrects
this behaviour by modifying href_base to '/' (for style-sheets) and
changing the src of the image (to be '/' always).
The access, birth, modification and change times are added to
storage volumes and corresponding xml representations. This
shows up in the XML in this format:
<timestamps>
<atime>1341933637.027319099</atime>
<mtime>1341933637.027319099</mtime>
</timestamps>
Signed-off-by: Eric Blake <eblake@redhat.com>
capability.rng: Guest features can be in any order.
nodedev.rng: Added <driver> element, <capability> phys_function and
virt_functions for PCI devices.
storagepool.rng: Owner or group ID can be -1.
schema tests: New capabilities and nodedev files; changed owner and
group to -1 in pool-dir.xml.
storage_conf: Print uid_t and gid_t as signed to storage pool XML.
With 0.10.0-rc0 out the door, we are committed to the next version
number.
* src/libvirt_public.syms (LIBVIRT_0.9.14): Rename...
(LIBVIRT_0.10.0): ...to this.
* docs/formatdomain.html.in: Fix fallout.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
Libvirt adds a USB controller to the guest even if the user does not
specify any in the XML. This is due to back-compat reasons.
To allow disabling USB for a guest this patch adds a new USB controller
type "none" that disables USB support for the guest.
Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.
More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
The cfg.mk file rule to check for tab characters was not
applied to perl files. Much of our Perl code is full of
tabs as a result. Kill them, kill them all !
We don't expect people to have tools installed to regenerate .png
from .fig by default. However, since commit 5eb3df8, several
.fig files were updated without regenerating the .png file, and
as a result, 'make dist' ends up regenerating those five files,
or worse, failing because of missing tools (convert from
ImageMagick).
Additionally, even if the tools are present, the generation of
.png files is nondeterministic (the resulting files contain a
timestamp), which means prior to this patch, running 'make dist'
from two checkouts will end up producing different tarball
contents (two 'make dist' runs will always produce different tar
files, since tarballs also contain timestamps; but unpacking the
tarballs and doing a recursive diff will show if the contents
are unchanged).
After this patch, the timestamps are now up-to-date, and 'make
dist' no longer has anything to do for the .png files. This gets
us closer to the goal of two checkouts being able to produce the
same tarball.
* docs/libvirt-*.png: Regenerate.
The time keeping example was missing quotes which resulted in an error
if you copied and pasted the example into a domain's XML. Additionally
the rest of the examples use single quotes (') instead of double quotes
(") so standardized that.
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Added s390-virtio machine type to the XML schema for domains in order
to not fail the domain schema tests.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Currently you can configure LXC to bind a host directory to
a guest directory, but not to bind a guest directory to a
guest directory. While the guest container init could do
this itself, allowing it in the libvirt XML means a stricter
SELinux policy can be written
Introduce a new syntax for filesystems to allow use of a RAM
filesystem
<filesystem type='ram'>
<source usage='10' units='MiB'/>
<target dir='/mnt'/>
</filesystem>
The usage units default to KiB to limit consumption of host memory.
* docs/formatdomain.html.in: Document new syntax
* docs/schemas/domaincommon.rng: Add new attributes
* src/conf/domain_conf.c: Parsing/formatting of RAM filesystems
* src/lxc/lxc_container.c: Mounting of RAM filesystems
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'boot' tag shouldn't be exclusive with 'kernel', 'initrd', and 'cmdline',
though the boot sequence doesn't make sense when the guest boots from
kernel directly. But it's useful if booting from kernel is to install
a newguest, even if it's not to install a guest, there is no hurt. And
on the other hand, we allow 'boot' and the kernel tags when parsing.
A core use case of the hook scripts is to be able to do things
to a guest's network configuration. It is possible to hook into
the 'start' operation for a QEMU guest which runs just before
the guest is started. The TAP devices will exist at this point,
but the QEMU process will not. It can be desirable to have a
'started' hook too, which runs once QEMU has started.
If libvirtd is restarted it will re-populate firewall rules,
but there is no QEMU hook to trigger for existing domains.
This is solved with a 'reconnect' hook.
Finally, if attaching to an external QEMU process there needs
to be an 'attach' hook script.
This all also applies to the LXC driver
* docs/hooks.html.in: Document new operations
* src/util/hooks.c, src/util/hooks.c: Add 'started', 'reconnect'
and 'attach' operations for QEMU. Add 'prepare', 'started',
'release' and 'reconnect' operations for LXC
* src/lxc/lxc_driver.c: Add hooks for 'prepare', 'started',
'release' and 'reconnect' operations
* src/qemu/qemu_process.c: Add hooks for 'started', 'reconnect'
and 'reconnect' operations
A few examples for <interface> had a type='direct' interface with no
sub-elements. This is not allowed - a type='direct' interface must
have at least a source element. (Most likely the example was copied
from the type='user' or type='ethernet' examples - they *do* allow an
instance with no sub-elements).
There was also one place that mistakenly used %lt; ... %gt; instead of
< ... > (for some reason, I make that typo all the time).
Eric Blake and Guido Günther were guests during this week's
FLOSS Weekly podcast, giving insights into libvirt as a Free
Software project. Also, there are several useful blogs on
virt-related topics.
* docs/relatedlinks.html.in (Blogs and Podcasts): New section.
We had a distributed file (remote_protocol.h, which in turn was
a prereq to remote_driver.c) depending on a generated file
(libvirt_probes.h), which is a no-no for a VPATH build from a
read-only source tree (no wonder 'make distcheck' tests precisely
that situation):
File `libvirt_driver_remote.la' does not exist.
File `libvirt_driver_remote_la-remote_driver.lo' does not exist.
Prerequisite `libvirt_probes.h' is newer than target `../../src/remote/remote_protocol.h'.
Must remake target `../../src/remote/remote_protocol.h'.
Invoking recipe from Makefile:7464 to update target `../../src/remote/remote_protocol.h'.
make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/libvirt-0.9.12/_build/src'
GEN ../../src/remote/remote_protocol.h
cannot create ../../src/remote/remote_protocol.h: Permission denied at ../../src/rpc/genprotocol.pl line 31.
make[3]: *** [../../src/remote/remote_protocol.h] Error 13
Rather than making distributed .c files depend on generated files, we
really want to ensure that compilation into .lo files is not attempted
until the generated files are present, done by this patch. Since there
were two different sets of conditionally generated files that both
feed the .lo file, I had to introduce a new variable REMOTE_DRIVER_PREREQS
to keep automake happy.
After that fix, the next issue was that make treats './foo' and 'foo'
differently in determining whether an implicit %foo rule is applicable,
with the result that locking/qemu-sanlock.conf wasn't properly being
built at the right times. Also, the output for using the .aug test
files was a bit verbose.
After fixing the src directory, the next error is related to the docs
directory, where the tarball is missing a stamp file and thus tries to
regenerate files that are already present:
GEN ../../docs/apibuild.py.stamp
Traceback (most recent call last):
File "../../docs/apibuild.py", line 2511, in <module>
rebuild("libvirt")
File "../../docs/apibuild.py", line 2495, in rebuild
builder.serialize()
File "../../docs/apibuild.py", line 2424, in serialize
output = open(filename, "w")
IOError: [Errno 13] Permission denied: '../../docs/libvirt-api.xml'
make[5]: *** [../../docs/apibuild.py.stamp] Error 1
and fixing that exposed another case of a distributed file (generated
html) depending on a built file (libvirt.h), but only when doing an
in-tree build, because of a file glob.
* src/Makefile.am ($(srcdir)/remote/remote_driver.c): Change...
(libvirt_driver_remote_la-remote_driver.lo): ...to the real
dependency.
($(builddir)/locking/%-sanlock.conf): Drop $(builddir), so that
rule gets run in time for test_libvirt_sanlock.aug.
(test_libvir*.aug): Cater to silent build.
(conf_DATA): Don't ship qemu-sanlock.conf in the tarball, since it
is trivial to regenerate.
* docs/Makefile.am (EXTRA_DIST): Ship our stamp file.
($(APIBUILD_STAMP)): Don't depend on generated file.
This patch adds DHCP snooping support to libvirt. The learning method for
IP addresses is specified by setting the "CTRL_IP_LEARNING" variable to one of
"any" [default] (existing IP learning code), "none" (static only addresses)
or "dhcp" (DHCP snooping).
Active leases are saved in a lease file and reloaded on restart or HUP.
The following interface XML activates and uses the DHCP snooping:
<interface type='bridge'>
<source bridge='virbr0'/>
<filterref filter='clean-traffic'>
<parameter name='CTRL_IP_LEARNING' value='dhcp'/>
</filterref>
</interface>
All filters containing the variable 'IP' are automatically adjusted when
the VM receives an IP address via DHCP. However, multiple IP addresses per
interface are silently ignored in this patch, thus only supporting one IP
address per interface. Multiple IP address support is added in a later
patch in this series.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The apibuild.py parser needs to be able to parse & ignore
any VIR_ENUM_IMPL/VIR_ENUM_DECL macros in the source. Add
some special case code to deal with this rather than trying
to figure out a generic syntax for parsing macros.
* apibuild.py: Special case VIR_ENUM_IMPL & VIR_ENUM_DECL
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This patch adds support for the recent ipset iptables extension
to libvirt's nwfilter subsystem. Ipset allows to maintain 'sets'
of IP addresses, ports and other packet parameters and allows for
faster lookup (in the order of O(1) vs. O(n)) and rule evaluation
to achieve higher throughput than what can be achieved with
individual iptables rules.
On the command line iptables supports ipset using
iptables ... -m set --match-set <ipset name> <flags> -j ...
where 'ipset name' is the name of a previously created ipset and
flags is a comma-separated list of up to 6 flags. Flags use 'src' and 'dst'
for selecting IP addresses, ports etc. from the source or
destination part of a packet. So a concrete example may look like this:
iptables -A INPUT -m set --match-set test src,src -j ACCEPT
Since ipset management is quite complex, the idea was to leave ipset
management outside of libvirt but still allow users to reference an ipset.
The user would have to make sure the ipset is available once the VM is
started so that the iptables rule(s) referencing the ipset can be created.
Using XML to describe an ipset in an nwfilter rule would then look as
follows:
<rule action='accept' direction='in'>
<all ipset='test' ipsetflags='src,src'/>
</rule>
The two parameters on the command line are also the two distinct XML attributes
'ipset' and 'ipsetflags'.
FYI: Here is the man page for ipset:
https://ipset.netfilter.org/ipset.man.html
Regards,
Stefan
Sometimes it is useful to see the callpath for log messages.
This change enhances the log filter syntax so that stack traces
can be show by setting '1:+NAME' instead of '1:NAME'.
This results in output like:
2012-05-09 14:18:45.136+0000: 13314: debug : virInitialize:414 : register drivers
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xd6)[0x7f89188ebe86]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]
2012-05-09 14:18:45.136+0000: 13314: debug : virRegisterDriver:775 : driver=0x7f8918d02760 name=Test
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virRegisterDriver+0x6b)[0x7f89188ec717]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(+0x11b3ad)[0x7f891891e3ad]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xf3)[0x7f89188ebea3]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]
* docs/logging.html.in: Document new syntax
* configure.ac: Check for execinfo.h
* src/util/logging.c, src/util/logging.h: Add support for
stack traces
* tests/testutils.c: Adapt to API change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
Ever since commit c964b6a, make was trying to find the timestamp
of '""./apibuild.py".stamp"', but only touching 'apibuild.py.stamp',
and thus always rebuilding. Reported by Daniel P. Berrange.
* docs/Makefile.am (APIBUILD, APIBUILD_STAMP): Omit bogus quotes.
Based on a report by Seth Vidal. Just because _you_ can use virsh
to connect to both source and destinations does not mean that libvirtd
on the source (aka _root_) can likewise connect to the destination;
this matters when setting up a peer-to-peer migration instead of a
native one.
* docs/migration.html.in: Mention that in peer-to-peer, the owner
of the source libvirtd (usually root) must be able to connect to
the destination.
Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.
This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:
<numatune>
<memory placement='auto' mode='interleave'/>
</numatune>
Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.
If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".
The following XML can now fully drive numad:
1) <vcpu> placement is 'auto', no <numatune> is specified.
<vcpu placement='auto'>10</vcpu>
2) <vcpu> placement is 'auto', no 'placement' is specified for
<numatune>.
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='interleave'/>
</numatune>
And it's also able to control the CPU placement and memory policy
independently. e.g.
1) <vcpu> placement is 'auto', and <numatune> placement is 'static'
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='strict' nodeset='0-10,^7'/>
</numatune>
2) <vcpu> placement is 'static', and <numatune> placement is 'auto'
<vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
<numatune>
<memory mode='interleave' placement='auto'/>
</numatume>
A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.
qemu's behavior in this case is to change the spice server behavior to
require secure connection to any channel not otherwise specified as
being in plaintext mode. libvirt doesn't currently allow requesting this
(via plaintext-channel=<channel name>).
RHBZ: 819499
Signed-off-by: Alon Levy <alevy@redhat.com>
In order to track a block copy job across libvirtd restarts, we
need to save internal XML that tracks the name of the file
holding the mirror. Displaying this name in dumpxml might also
be useful to the user, even if we don't yet have a way to (re-)
start a domain with mirroring enabled up front. This is done
with a new <mirror> sub-element to <disk>, as in:
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/original.img'/>
<mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/>
...
</disk>
For now, the element is output-only, in live domains; it is ignored
when defining a domain or hot-plugging a disk (since those contexts
use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears
when libvirt knows that the job has changed from the initial pulling
phase over to the mirroring phase, although absence of the attribute
is not a sure indicator of the current phase. If we come up with a way
to make qemu start with mirroring enabled, we can relax the xml
restriction, and allow <mirror> (but not attribute 'ready') on input.
Testing active-only XML meant tweaking the testsuite slightly, but it
was worth it.
* docs/schemas/domaincommon.rng (diskspec): Add diskMirror.
* docs/formatdomain.html.in (elementsDisks): Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): New members.
* src/conf/domain_conf.c (virDomainDiskDefFree): Clean them.
(virDomainDiskDefParseXML): Parse them, but only internally.
(virDomainDiskDefFormat): Output them.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise.
* tests/qemuxml2xmltest.c (testInfo): Alter members.
(testCompareXMLToXMLHelper): Allow more test control.
(mymain): Run new test.
<filesystemtgt> is redundant, as every group uses it; <address>
shouldn't be in <filesystemtgt> in case of the meaning could be
"filesystemtarget"; The elements <address>, <alias>, <target>,
... should be interleaved.
'omitted' was mispelt 'commited' twice. One of the sentences with
the typo was also missing an 'is' ('each VCPU *is* pinned to all...')
which I added in this commit while I was at it.
As explained in previous patch, numad will balance the affinity
dynamically, so reflecting the cpuset from numad at the first
time doesn't make much case, and may just could cause confusion.
This is based on recent developments on patch checker and the
goal is to keep a list of pending patches needing review on the
project web site. The page template in git just holds a pointer
to the web page.
Every now & then, with parallel builds, we get a failure to
validate hvsupport.html.in. I eventually noticed that this
is because we get 2 instances of the generator running at
once.
We already list hvsupport.html.in in BUILT_SOURCES but this
was not working. It turns out the flaw is that we were
adding deps to the 'all:' target instead of the 'all-am:'
target. BUILT_SOURCES is a dep of 'all', so any custom
targets written in Makefile.am must use 'all-am:' so that
they don't get run until BUILT_SOURCES are completely
generated
* docs/Makefile.am: s/all/all-am/
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated a number of languages translation including new
indian languages and regenerated
Since Xen 3.1 the clock=variable semantic is supported. In addition to
qemu/kvm Xen also knows about a variant where the offset is relative to
'localtime' instead of 'utc'.
Extends the libvirt structure with a flag 'basis' to specify, if the
offset is relative to 'localtime' or 'utc'.
Extends the libvirt structure with a flag 'reset' to force the reset
behaviour of 'localtime' and 'utc'; this is needed for backward
compatibility with previous versions of libvirt, since they report
incorrect XML.
Adapt the only user 'qemu' to the new name.
Extend the RelaxNG schema accordingly.
Document the new 'basis' attribute in the HTML documentation.
Adapt test for the new attribute.
Signed-off-by: Philipp Hahn <hahn@univention.de>
There are a number of flaws with our packaging of the libvirtd
daemon:
- Installing 'libvirt' does not install 'qemu-kvm' or 'xen'
etc which are required to actually run the hypervisor in
question
- Installing 'libvirt' pulls in the default configuration
files which may not be wanted & cause problems if installed
inside a guest
- It is not possible to explicitly required all the peices
required to manage a specific hypervisor
This change takes the 'libvirt' RPM and and changes it thus
- libvirt: just a virtual package with dep on libvirt-daemon,
libvirt-daemon-config-network & libvirt-daemon-config-nwfilter
- libvirt-daemon: the libvirt daemon and related pieces
- libvirt-daemon-config-network: the default network config
- libvirt-daemon-config-nwfilter: the network filter configs
- libvirt-docs: the website HTML
We then introduce some more virtual (empty) packages
- libvirt-daemon-qemu: Deps on libvirt-daemon & 'qemu'
- libvirt-daemon-kvm: Deps on libvirt-daemon & 'qemu-kvm'
- libvirt-daemon-lxc: Deps on libvirt-daemon
- libvirt-daemon-uml: Deps on libvirt-daemon
- libvirt-daemon-xen: Deps on libvirt-daemon & 'xen'
- libvirt-qemu: Deps on libvirt-daemon-qemu & libvirt-daemon-config-{network,nwfilter}
- libvirt-kvm: Deps on libvirt-daemon-kvm & libvirt-daemon-config-{network,nwfilter}
- libvirt-lxc: Deps on libvirt-daemon-lxc & libvirt-daemon-config-{network,nwfilter}
- libvirt-uml: Deps on libvirt-daemon-uml & libvirt-daemon-config-{network,nwfilter}
- libvirt-xen: Deps on libvirt-daemon-xen & libvirt-daemon-config-network
My intent in the future is to turn on the driver modules by
default, at which time 'libvirt-daemon' will cease to include
any specific drivers, instead we'll get libvirt-daemon-driver-XXXX
packages for each driver. The libvirt-daemon-XXX packages will
then pull in each driver that they require.
It is recommended that applications required a locally installed
libvirtd daemon, use either 'Requires: libvirt-daemon-XXXX' or
'Requires: libvirt-XXX' and *not* "Requires: libvirt-daemon"
or 'Requires: libvirt'
* libvirt.spec.in: Refactor RPMs
* docs/packaging.html.in, docs/sitemap.html.in: Document
new RPM split rationale
* Don't advertise information on the network without consent of
the user, either through manual configuration, or a user
interface that drives this option.
* Since libvirtd must be configured for network access anyway
(for all but ssh), this setting was not useful "out of the box",
so changing this default setting does not remove "out of the box"
functionality.
Pass argv to the init binary of LXC, using a new <initarg> element.
* docs/formatdomain.html.in: Document <os> usage for containers
* docs/schemas/domaincommon.rng: Add <initarg> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
formatting of <initarg>
* src/lxc/lxc_container.c: Setup LXC argv
* tests/Makefile.am, tests/lxcxml2xmldata/lxc-systemd.xml,
tests/lxcxml2xmltest.c, tests/testutilslxc.c,
tests/testutilslxc.h: Test parsing/formatting of LXC related
XML parts
A few times libvirt users manually setting mac addresses have
complained of a networking failure that ends up being due to a multicast
mac address being used for a guest interface. This patch prevents that
by logging an error and failing if a multicast mac address is
encountered in each of the three following cases:
1) domain xml <interface> mac address.
2) network xml bridge mac address.
3) network xml dhcp/host mac address.
There are several other places where a mac address can be input that
aren't controlled in this manner because failure to do so has no
consequences (e.g., if the address will be used to search through
existing interfaces for a match).
The RNG has been updated to add multiMacAddr and uniMacAddr along with
the existing macAddr, and macAddr was switched to uniMacAddr where
appropriate.
If no <interface> elements are included in an LXC guest XML
description, then the LXC guest will just see the host's
network interfaces. It is desirable to be able to hide the
host interfaces, without having to define any guest interfaces.
This patch introduces a new feature flag <privnet/> to allow
forcing of a private network namespace for LXC. In the future
I also anticipate that we will add <privuser/> to force a
private user ID namespace.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add support
for <privnet/> feature. Auto-set <privnet> if any <interface>
devices are defined
* src/lxc/lxc_container.c: Honour request for private network
namespace
Currently if the URI passed to virConnectOpen* is NULL, then we
- Look for LIBVIRT_DEFAULT_URI env var
- Probe for drivers
This changes it so that
- Look for LIBVIRT_DEFAULT_URI env var
- Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
- Probe for drivers
numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.
More details: http://fedoraproject.org/wiki/Features/numad
"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.
This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.
<vcpu placement="auto">4</vcpu>
<vcpu placement="static" cpuset="1-10^6">4</vcpu>
The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
<vcpu placement="auto" cpuset="1-10^6">4</vcpu>
If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
numad -w $num_of_vcpus:$current_memory_amount / 1024
The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).
If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.
Only QEMU/KVM drivers support it now.
See docs update in patch for more details.
If there is a disk file with a comma in the name, QEmu expects a double
comma instead of a single one (e.g., the file "virtual,disk.img" needs
to be specified as "virtual,,disk.img" in QEmu's command line). This
patch fixes libvirt to work with that feature. Fix RHBZ #801036.
Based on an initial patch by Crístian Viana.
* src/util/buf.h (virBufferEscape): Alter signature.
* src/util/buf.c (virBufferEscape): Add parameter.
(virBufferEscapeSexpr): Fix caller.
* src/qemu/qemu_command.c (qemuBuildRBDString): Likewise. Also
escape commas in file names.
(qemuBuildDriveStr): Escape commas in file names.
* docs/schemas/basictypes.rng (absFilePath): Relax RNG to allow
commas in input file names.
* tests/qemuxml2argvdata/*-disk-drive-network-sheepdog.*: Update
test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Output is still in kibibytes, but input can now be in different
scales for ease of typing.
* src/conf/domain_conf.c (virDomainParseMemory): New helper.
(virDomainDefParseXML): Use it when parsing.
* docs/schemas/domaincommon.rng: Expand XML; rename memoryKBElement
to memoryElement and update callers.
* docs/formatdomain.html.in (elementsMemoryAllocation): Document
scaling.
* tests/qemuxml2argvdata/qemuxml2argv-memtune.xml: Adjust test.
* tests/qemuxml2xmltest.c: Likewise.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-memtune.xml: New file.
The test domain allows <memory>0</memory>, but the RNG was stating
that memory had to be at least 4096000 bytes. Hypervisors should
enforce their own limits, rather than complicating the RNG.
Meanwhile, some copy and paste had introduced some fishy constructs
in various unit tests.
* docs/schemas/domaincommon.rng (memoryKB, memoryKBElement): Drop
limit that isn't enforced in code.
* src/conf/domain_conf.c (virDomainDefParseXML): Require current
<= maximum.
* tests/qemuxml2argvdata/*.xml: Fix offenders.
Disk manufacturers are fond of quoting sizes in powers of 10,
rather than powers of 2 (after all, 2.1 GB sounds larger than
2.0 GiB, even though the exact opposite is true). So, we might
as well follow coreutils' lead in supporting three types of
suffix: single letter ${u} (which we already had) and ${u}iB
for the power of 2, and ${u}B for power of 10.
Additionally, it is impossible to create a file with more than
2**63 bytes, since off_t is signed (if you have enough storage
to even create one 8EiB file, I'm jealous). This now reports
failure up front rather than down the road when the kernel
finally refuses an impossible size.
* docs/schemas/basictypes.rng (unit): Add suffixes.
* src/conf/storage_conf.c (virStorageSize): Use new function.
* docs/formatstorage.html.in: Document it.
* tests/storagevolxml2xmlin/vol-file-backing.xml: Test it.
* tests/storagevolxml2xmlin/vol-file.xml: Likewise.
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.
Tests were updated via:
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"
followed by a few fixes for the stragglers.
Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.
* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
The code supported unit='E' for "exabyte", but the RNG did not;
conversely, the RNG supported "z" and "y" but the code did not
(I'm jealous if you have that much storage, particularly since
it won't fit in 64-bit off_t). Also, the code supported
<allocation unit='...'>, but not the RNG.
In an effort to make 'unit' more worthwhile in future patches,
it's easier to share it between files.
In making this factorization, note that absFilePath is more
permissive than 'path', so storage pools and storage volumes
will now validate with a wider set of file names than before.
I don't think this should be a problem in practice.
* docs/schemas/storagepool.rng: Include basic types, rather than
repeating things here.
* docs/schemas/storagevol.rng: Likewise.
* docs/schemas/basictypes.rng: Add 'unsignedLong', 'unit', and fix
to match storage code.
Yes, I like kilobytes better than kibibytes (when I say kilobytes,
I generally mean 1024). But since the term is ambiguous, it can't
hurt to say what we mean, by using both the correct name and
calling out the numeric equivalent.
* src/libvirt.c (virDomainGetMaxMemory, virDomainSetMaxMemory)
(virDomainSetMemory, virDomainSetMemoryFlags)
(virNodeGetFreeMemory): Tweak wording.
* docs/formatdomain.html.in: Likewise.
* docs/formatstorage.html.in: Likewise.
This is the new interface type that sets up an SR-IOV PCI network
device to be assigned to the guest with PCI passthrough after
initializing some network device-specific things from the config
(e.g. MAC address, virtualport profile parameters). Here is an example
of the syntax:
<interface type='hostdev' managed='yes'>
<source>
<address type='pci' domain='0' bus='0' slot='4' function='3'/>
</source>
<mac address='00:11:22:33:44:55'/>
<address type='pci' domain='0' bus='0' slot='7' function='0'/>
</interface>
This would assign the PCI card from bus 0 slot 4 function 3 on the
host, to bus 0 slot 7 function 0 on the guest, but would first set the
MAC address of the card to 00:11:22:33:44:55.
NB: The parser and formatter don't care if the PCI card being
specified is a standard single function network adapter, or a virtual
function (VF) of an SR-IOV capable network adapter, but the upcoming
code that implements the back end of this config will work *only* with
SR-IOV VFs. This is because modifying the mac address of a standard
network adapter prior to assigning it to a guest is pointless - part
of the device reset that occurs during that process will reset the MAC
address to the value programmed into the card's firmware.
Although it's not supported by any of libvirt's hypervisor drivers,
usb network hostdevs are also supported in the parser and formatter
for completeness and consistency. <source> syntax is identical to that
for plain <hostdev> devices, except that the <address> element should
have "type='usb'" added if bus/device are specified:
<interface type='hostdev'>
<source>
<address type='usb' bus='0' device='4'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
If the vendor/product form of usb specification is used, type='usb'
is implied:
<interface type='hostdev'>
<source>
<vendor id='0x0012'/>
<product id='0x24dd'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
Again, the upcoming patch to fill in the backend of this functionality
will log an error and fail with "Unsupported Config" if you actually
try to assign a USB network adapter to a guest using <interface
type='hostdev'> - just use a standard <hostdev> entry in that case
(and also for single-port PCI adapters).
* src/conf/domain_conf.h: Add new member "target" to struct
_virDomainDeviceDriveAddress.
* src/conf/domain_conf.c: Parse and format "target"
* Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
tests/vmx2xmldata/ are modified for newly introduced
attribute "target" for address of "drive" type.
