All callers currently guarantee flags passed to virDomainObjGetMessages
are either zero or contain at least one of the supported flags. But it
doesn't mean we should not check for the possibility an unknown flag was
the only one passed to virDomainObjGetMessages.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If 1024 was not enough to fit the DN, gnutls_x509_crt_get_dn would store
the required size in subjectlen. And since we're not checking the return
value of this function, we would happily overwrite some random memory.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We use 'ret' for storing values to be returned from a function. Return
values from called functions that are not supposed to be returned
further are usually called 'rv' (or 'rc').
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tests testVirPCIVPDReadVPDBytes and testVirPCIVPDParseFullVPDInvalid
failed to properly close open fildescriptors in some cases. Let's fix it
by switching to VIR_AUTOCLOSE in the whole file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are few places where a virPCIDeviceAddress typed variable
is allocated on the stack but it's not initialized. This can lead
to random values of its members which in turn can lead to a
random behaviour.
Generated with help of the following spatch:
@@
identifier I;
@@
- virPCIDeviceAddress I;
+ virPCIDeviceAddress I = { 0 };
And then fixing bhyveAssignDevicePCISlots() which does declare
the variable and then explicitly zero it by calling memset() only
to set a specific member afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
After previous commits, the cleanup label shrank to plain
'return' statement. There's no point in having such label, so
drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Nothing inside the qemuPrepareNVRAM function relies on @srcFD
being closed early and nothing closes it early. It's okay then to
close it automatically when leaving the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After previous commits there is no need for qemuPrepareNVRAM() to
open code virFileRewrite(). Deduplicate the code by calling the
function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When rewriting a file using virFileRewrite() and error occurs
while writing into a temporary file it's actually the callback
that can report the most accurate error. Move error reporting
into very few callback we have currently. Those callbacks are
trivial so the benefit of this change is not obvious, but this
will change shortly when slightly more complicated callback is
introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, due to the way virFileRewrite() works, the rewritten
file is owned by user and group that the daemon runs under. So
far, this is not a problem, because the function is used to write
XML files or secrets for persistent objects (domains, networks,
etc.) and we don't need other users to read/write those files.
But shortly, this function is going to be used for creating files
for QEMU domains. There we want the QEMU process (i.e. different
user) to read the file.
Therefore, introduce two new arguments: @uid and @gid that allow
setting desired owner of the file. Pass -1 to preserve current
behaviour (i.e. create the file owned by the user running the
daemon).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Even though the CH driver doesn't implement virNetworkUpdate()
API, when it does it will see the arguments in correct order.
This is similar to other drivers that don't implement the API,
like ESX, libxl, LXC, etc. Enabling this driver feature stops
clients from swapping the arguments (see comment in the API for
more info).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
No functional change intended. This change makes the refactoring to
automatic mutex management easier to follow.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
No functional change intended. This change makes the recfatoring to
automatic mutex management easier to follow.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two places where a domain can be started in CH driver:
chDomainCreateXML() and chDomainCreateWithFlags(). Both acquire a
job (good), but neither of them checks whether the domain isn't
already running. This is wrong. Fortunately, both function call
the very same virCHProcessStart() rendering it the best place for
such check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are few places where a call to virDomainObjListRemove() is
guarded with !vm->persistent check. And there are some places
which are missing this check completely (leading us to losing a
domain). To prevent such mistakes introduce
virCHDomainRemoveInactive() which does the check for us. Also
replace all occurrences of virDomainObjListRemove() with the call
to the new function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
When creating a domain failed, then the virCHDomainObjEndJob()
would be jumped over. Fix this by creating enjob label and fixing
one goto.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Inside chDomainCreateXML(), towards the end, the driver is
unlocked even though there is no corresponding driver lock call
before that. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There is no need to lock whole driver when accessing
virDomainObjList. Those APIs were specifically tailored to be
thread safe (when we were dropping QEMU driver lock). Don't
resurrect old history.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In chConnectGetVersion() the CH driver is locked in order to read
driver->version. This is needless, because not only is the
version set with driver unlocked (chStateInitialize() calls
chExtractVersion() which sets the version), but the version is
practically immutable. Once driver initialized itself it's never
changed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
If VIR_QEMU_PROCESS_START_RESET_NVRAM flag is passed when
starting a domain, then user requested to overwrite the domain
specific NVRAM with the one from template. But it is very likely
that the path to the template is not stored in the domain
definition, which in turn makes the copy function
(qemuPrepareNVRAM()) fail.
The solution is simple - when preparing domain, specifically when
deciding whether the path to the template should be autofilled,
ignore any existing NVRAM file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In one of my previous commits I've fixed the value of
VIR_QEMU_PROCESS_START_RESET_NVRAM flag (which was masking
another value). But what I forgot to do is update virCheckFlags()
calls in two places where the flag is passed: qemuProcessLaunch()
and qemuProcessStart().
Fixes: 1b636593c7
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The repositories containing them are usually offered with lower
guarantees, so we don't consider them when it comes to figuring
out the minimum targeted version of our dependencies.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use VIR_AUTOFREE for the temp socket so that the 'error:' label can be
removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
We try to update vlan tag by running virsh update-device command,
libvirtd will report ovs-vsctl arguments error. Vlan tag update
funtion does't consider the xml with no vlan configured circumstances.
The steps to reproduce the problem:
1 define and start domain with its vlan configured as:
<interface type='bridge'>
<mac address='52:54:00:9e:bb:ac'/>
<source bridge='ovs-br0'/>
<vlan>
<tag id='10'/>
</vlan>
<virtualport type='openvswitch'>
</virtualport>
<target dev='vnet4.0'/>
<model type='virtio'/>
<driver name='vhost'/>
</interface>
2 define and run virsh update-device command with no vlan configured as:
<interface type='bridge'>
<mac address='52:54:00:9e:bb:ac'/>
<source bridge='ovs-br0'/>
<virtualport type='openvswitch'>
</virtualport>
<target dev='vnet4.0'/>
<model type='virtio'/>
<driver name='vhost'/>
</interface>
#virsh update-device dom-id novlan.xml
3 virsh command returned error, and we got an error in libvirtd.log:
error : virCommandWait:2584 : internal error: exit status 1: ovs-vsctl: 'set' command requires at least 3 arguments
. Child process (ovs-vsctl --timeout=5 -- --if-exists clear Port vnet4.0 tag -- --if-exists clear Port vnet4.0 trunk
-- --if-exists clear Port vnet4.0 vlan_mode -- --if-exists set Port vnet4.0) unexpected
error : virNetDevOpenvswitchUpdateVlan:540 : internal error: Unable to set vlan configuration on port vnet4.0
Signed-off-by: Tu Qiang <tu.qiang35@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are dupliacated and non-continuous CPU IDs used in HMAT
example. Fix that.
Signed-off-by: Jing Qi <jinqi@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Older kernels did not support this sysctl, but they did not restrict
userfaultfd in any way so everything worked as if
vm.unprivileged_userfaultfd was set to 1. Thus we can safely ignore
errors when setting the value.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuPrepareNVRAM() function accepts three arguments and the
last one being a boolean type. However, when the function is
called from qemuProcessPrepareHost() the argument passed is a
result of logical and of @flags (unsigned int) and
VIR_QEMU_PROCESS_START_RESET_NVRAM value. In theory this is
unsafe to do because if the value of the flag is ever changed
then this expression might overflow. Do what we do elsewhere:
double negation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In one of recent commits qemuProcessStartFlags enum gained new
value: VIR_QEMU_PROCESS_START_RESET_NVRAM but due to a typo it
has the same value as another member of the enum. Fix that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While VNC ports auto-allocated by the libxl driver are released in
libxlDomainCleanup, spice ports are overlooked. Rework the existing
logic to release any auto-allocated graphics ports, not just the VNC
port of the first graphics device.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the <loader> had an explicit readonly='no' attribute we
accidentally still marked the plfash as readonly due to the
bad conversion from virTristateBool to bool. This was missed
because the test cases run with no capabilities set and thus
are validated the -drive approach for pflash configuration,
not the -blockdev approach.
This affected the following config:
<os>
<loader readonly='no' type='pflash'>/var/lib/libvirt/qemu/nvram/test-bios.fd</loader>
</os>
for the sake of completeness, we also add a test XML config
with no readonly attribute at all, to demonstrate that the
default for pflash is intended to be r/w.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This wires up support for resetting NVRAM for all APIs that allow
this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We can now replace the existing NVRAM file on startup when
the API requests this.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When starting a guest with pflash based firmware, we will initialize
NVRAM from a template if it does not already exist. In theory if the
firmware code file is updated, the existing NVRAM variables should
continue to work correctly. It is inevitable that this could break
accidentally one day. Or a bug in the firmware might corrupt the
NVRAM storage. Or user might make bad changes to the settings that
prevent booting. Or the user might have re-configured the XML to
point to a different firmware file incompatible with the current
variables.
In all these cases it would be useful to delete the existing NVRAM
and initialize it from the pristine template.
To support this introduce a VIR_DOMAIN_START_RESET_NVRAM constant
for use with virDomainCreate / virDomainCreateXML, along with
VIR_DOMAIN_SAVE_RESET_NVRAM for use with virDomainRestore and
VIR_DOMAIN_SNAPSHOT_REVERT_RESET_NVRAM for use with
virDomainSnapshotRevert.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If we crash part way through writing the NVRAM file we end up with an
unusable NVRAM on file. To avoid this we need to write to a temporary
file and fsync(2) at the end, then rename to the real NVRAM file path.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In one of my previous commits, I've changed an XPath in
virCPUDefParseXML() from "boolean(./counter...)" to
"./counter...)". Notice the dangling closing bracket? Well, I
didn't back then.
Fixes: 0fe2d8dd33
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This change was generated using the following spatch:
@ rule1 @
expression a;
identifier f;
@@
<...
- f(*a);
... when != a;
- *a = NULL;
+ g_clear_pointer(a, f);
...>
@ rule2 @
expression a;
identifier f;
@@
<...
- f(a);
... when != a;
- a = NULL;
+ g_clear_pointer(&a, f);
...>
Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two places where a variable passed to VBOX_RELEASE()
macro is set to NULL explicitly. There is no need for that
because the macro sets the variable to NULL already.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libxl driver reconnects to all running VMs when libvirtd is restarted,
but it failed to mark auto-allocated graphics ports as set in the port
allocator. If many VMs are running that use port auto-allocation and
libvirtd is restarted, the port allocator is likely to hand out a port
already in use when a new VM is created that uses auto-allocation. VM
creation will fail due to the port clash.
When reconnecting to running VMs after a libvirtd restart, let the port
allocator know about previously allocated ports.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify 'qemuProcessGetVCPUQOMPath' to take the detected QOM path of the
first vCPU which is always present as the QOM path used our code probing
CPU flags via 'qom-get'.
This is needed as upcoming qemu will change it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/272
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2051451
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>